github-mirrors/HeatPumpController
1
0
Fork 0
mirror of https://github.com/openhp/HeatPumpController.git synced 2024-11-18 12:33:59 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

Update README.md

Browse source
This commit is contained in:
openhp 2021-03-30 17:43:04 +00:00 committed by GitHub
parent ae992754c0
commit ff0d67979b
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 4 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
README.md
View file

@ -37,6 +37,7 @@
- download PCB Gerber file or get your own copy {-link here-}
- order electronic components, see BOM (Bill Of Materials) appendix below,
- solder electronic components. {- assembly instructions here-}<br><br>
{-soldered photo here-}
## Firmware upload
This process is the same as for other Arduinos:
@ -49,6 +50,8 @@ This process is the same as for other Arduinos:
For arduinos with an old bootloader you need to update it. (Tools-> Burn Bootloader).<br>
For successful compilation, you must have "SoftwareSerial", "OneWire" and "DallasTemperature" libraries installed (see Tools -> Manage Libraries).<br>
For the first time it's enough to upload firmware without any tuning. Think of it as of a commercial closed-source controller, where you cannot fine-tune internal options. And any other manual configuration do not required too, just upload firmware.<br><br>
<img src="./m_add_IDE.png" height="300"><br><br>
{-IDE photo here-}
## Self-tests
QA tests are available to test the assembled board.<br>
@ -430,6 +433,7 @@ Last option
#define MAX_SEQUENTIAL_ERRORS 15 //max cycles to wait auto-clean error, ex: T sensor appears, stop compressor after counter exceeded (millis_cycle * MAX_SEQUENTIAL_ERRORS)
```
## Appendix D: bill of materials
<img src="./m_add_parts.jpg"><br>
| Part | Quantity |
| ------------- | ------------- |
| **1206 Resistors:** ||