Linkplay/persistant-hook.md

# Install Persistant Hook
When the device reboots, any changes in ramfs are lost, but the device is using flash with squashfs and jffs2 file systems. I have not discovered how to modfiy and upload an image to squashfs, but with jffs2 there is a way to install a hook. That hook even survives an upgrade that is done afterwards (see end of this section)!

To start, you have to enable telnet and that may require a downgrade in the first step. See [Downgrade Firmware](/Downgrade.md) and [Enable telnetd](/TELNETD.md).

Below is an output of mount command and ***cat /proc/mtd*** output:
```
# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro,relatime)
proc on /proc type proc (rw,relatime)
none on /var type ramfs (rw,relatime)
none on /etc type ramfs (rw,relatime)
none on /tmp type ramfs (rw,relatime)
none on /media type ramfs (rw,relatime)
none on /sys type sysfs (rw,relatime)
none on /dev/pts type devpts (rw,relatime,mode=600)
mdev on /dev type ramfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
mdev on /dev type ramfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
/dev/mtdblock8 on /mnt type jffs2 (rw,relatime)
/dev/mtdblock9 on /vendor type jffs2 (rw,relatime)

# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 01000000 00010000 "ALL"
mtd1: 00030000 00010000 "Bootloader"
mtd2: 00010000 00010000 "Config"
mtd3: 00010000 00010000 "Factory"
mtd4: 00200000 00010000 "bkKernel"
mtd5: 001df508 00010000 "Kernel"
mtd6: 00950af8 00010000 "RootFS"
mtd7: 00b30000 00010000 "Kernel_RootFS"
mtd8: 00080000 00010000 "user"
mtd9: 00200000 00010000 "user2"
#
```
The mtd9 device named "user2" is not erased at a reboot, because it contains play lists. It is mounted as /vendor and a hook can be installed in ***/vendor/user*** directory as described below. On the Up2Stream Pro device that I own that directory was already present and a script called ***user.sh*** was located in that directory. 

> **Note:**
> Neither that directory nor the **user.sh** script were installed on my Up2Stream Amp device by default. Both devices have the same software version 4.2.8020 from 2020/02/20 (20th of Feb 2020) and were downgraded from v4.6.415145, release date 2022/04/27.

Here's the file from the device where the script was already present (used to start a daemon called ***socket***):
```
# cat user.sh
#!/bin/sh

echo "runing custom's app socket.............."
sleep 5

chmod 777 /vendor/user/socket

sn=`ps -ef | grep /vendor/user/socket | grep -v grep |wc -l`
echo $sn

if [ $sn -eq 0 ]; then
        /vendor/user/socket &
fi

# ######### additional code to install telnetd and more #############
# get telnetd from full version of busybox and start in background
mkdir /tmp/bin
wget -O /tmp/bin/busybox -T 5 http://10.1.1.22/linkplay/a31/bin/busybox -q
chmod 555 /tmp/bin/busybox
ln -s /tmp/bin/busybox /tmp/bin/telnetd
sn=`ps | grep busybox | wc -l`
if [ $sn -eq 1 ]; then
  killall busybox
fi
sn=`ps | grep telnetd | wc -l`
if [ $sn -eq 1 ]; then
  killall telnetd
fi
/tmp/bin/telnetd telnetd -l/bin/ash &

# shut down WiFi
ifconfig apcli0 down
ifconfig ra0 down
sleep 60
ifconfig apcli0 down
echo "WiFi disabled!"

# Uncomment to disable sleep after 15 minutes
#while true; do sleep 60; echo 'AXX+MUT+000' >/dev/ttyS0; done &
```
For testing purpose, you may ***reboot*** and ***telnet*** to the device afterwards.

Here's the file from the device where the script was NOT present. There is a little "enhancement" included, because the downloaded version of busybox is used as the shell ***/tmp/bin/ash*** instead of "build-in" version. You can see the difference, because the shell prompt message is ***BusyBox v1.23.2 (2016-09-27 07:54:34 CEST) built-in shell (ash)*** instead of ***BusyBox v1.12.1 () built-in shell (ash)***.

A list of all commands that are included is shown with ***/tmp/bin/busybox --help*** or just help (see shell script below). You may create symbolic links for these commands (recommended, see below for an example) or start them directly, e.g. ***/tmp/bin/busybox dmesg***.
```
mkdir /vendor/user
cat <<\EOF > /vendor/user/user.sh
#!/bin/sh

sleep 5
# get telnetd from full version of busybox and start in background
mkdir /tmp/bin
wget -O /tmp/bin/busybox -T 5 http://10.1.1.22/linkplay/a31/bin/busybox -q
chmod 555 /tmp/bin/busybox
ln -s /tmp/bin/busybox /tmp/bin/telnetd
ln -s /tmp/bin/busybox /tmp/bin/ash
/tmp/bin/telnetd telnetd -l/tmp/bin/ash &

echo '#!/bin/sh' >/tmp/bin/help
echo '/tmp/bin/busybox --help' >>/tmp/bin/help
chmod 755 /tmp/bin/help

# shut down WiFi
ifconfig apcli0 down
ifconfig ra0 down
sleep 600
ifconfig apcli0 down

# Uncomment to disable sleep after 15 minutes
#while true; do sleep 60; echo 'AXX+MUT+000' >/dev/ttyS0; done &
EOF
chmod 755 /vendor/user/user.sh
cd /vendor/user
ls -l
```
The shutdown of "apcli0" does not work within the script, however it works a bit later if executed manually.

So far, the device fetches the full version of busybook after each reboot, but stores that binary in ramfs. With ***df*** command you can verify the free space on each of the file systems.

The good thing is, that this hook even suvives an upgrade that is done afterwards (tested with v4.6.415145, release date 2022/04/27.):
```
Mac-mini ~ % curl -s 'http://10.1.1.52/httpapi.asp?command=getStatusEx' | jq
{
  "uuid": "FF31F09EAC1C213319CC79B5",
  "DeviceName": "Wohnzimmer",
  "GroupName": "Wohnzimmer",
  "ssid": "Wohnzimmer_4029",
  "language": "en_us",
  "firmware": "4.6.415145",
  "hardware": "A31",
  "build": "release",
  "project": "UP2STREAM_PRO_V3",
  "priv_prj": "UP2STREAM_PRO_V3",
  "project_build_name": "a31rakoit",
  "Release": "20220427",
  "temp_uuid": "B4D39CBCE2C2015F",
  ...
}  
Mac-mini ~ % telnet 10.1.1.52
Trying 10.1.1.52...
Connected to 10.1.1.52.
Escape character is '^]'.


BusyBox v1.23.2 (2016-09-27 07:54:34 CEST) built-in shell (ash)

/system/workdir # exit
Connection closed by foreign host.
  ```