VictoriaMetrics/lib/backup/azremote/azblob_test.go

129 lines
2.8 KiB
Go
Raw Permalink Normal View History

lib/backup: add support for Azure Managed Identity (#6518) ### Describe Your Changes These changes support using Azure Managed Identity for the `vmbackup` utility. It adds two new environment variables: * `AZURE_USE_DEFAULT_CREDENTIAL`: Instructs the `vmbackup` utility to build a connection using the [Azure Default Credential](https://pkg.go.dev/github.com/Azure/azure-sdk-for-go/sdk/azidentity@v1.5.2#NewDefaultAzureCredential) mode. This causes the Azure SDK to check for a variety of environment variables to try and make a connection. By default, it tries to use managed identity if that is set up. This will close https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984 ### Checklist The following checks are **mandatory**: - [x] My change adheres [VictoriaMetrics contributing guidelines](https://docs.victoriametrics.com/contributing/). ### Testing However you normally test the `vmbackup` utility using Azure Blob should continue to work without any changes. The set up for that is environment specific and not listed out here. Once regression testing has been done you can set up [Azure Managed Identity](https://learn.microsoft.com/en-us/entra/identity/managed-identities-azure-resources/overview) so your resource (AKS, VM, etc), can use that credential method. Once it is set up, update your environment variables according to the updated documentation. I added unit tests to the `FS.Init` function, then made my changes, then updated the unit tests to capture the new branches. I tested this in our environment, but with SAS token auth and managed identity and it works as expected. --------- Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com> Co-authored-by: Justin Rush <jarush@epic.com> Co-authored-by: Zakhar Bessarab <z.bessarab@victoriametrics.com> Co-authored-by: hagen1778 <roman@victoriametrics.com> (cherry picked from commit 5fd3aef54954c9744a370c5c11e1639cc52049e1)
2024-07-10 09:52:05 +00:00
package azremote
import (
"strings"
"testing"
)
func TestCleanDirectory(t *testing.T) {
f := func(dir, exp string) {
t.Helper()
got := cleanDirectory(dir)
if got != exp {
t.Fatalf("expected dir %q, got %q", exp, got)
}
lib/backup: add support for Azure Managed Identity (#6518) ### Describe Your Changes These changes support using Azure Managed Identity for the `vmbackup` utility. It adds two new environment variables: * `AZURE_USE_DEFAULT_CREDENTIAL`: Instructs the `vmbackup` utility to build a connection using the [Azure Default Credential](https://pkg.go.dev/github.com/Azure/azure-sdk-for-go/sdk/azidentity@v1.5.2#NewDefaultAzureCredential) mode. This causes the Azure SDK to check for a variety of environment variables to try and make a connection. By default, it tries to use managed identity if that is set up. This will close https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984 ### Checklist The following checks are **mandatory**: - [x] My change adheres [VictoriaMetrics contributing guidelines](https://docs.victoriametrics.com/contributing/). ### Testing However you normally test the `vmbackup` utility using Azure Blob should continue to work without any changes. The set up for that is environment specific and not listed out here. Once regression testing has been done you can set up [Azure Managed Identity](https://learn.microsoft.com/en-us/entra/identity/managed-identities-azure-resources/overview) so your resource (AKS, VM, etc), can use that credential method. Once it is set up, update your environment variables according to the updated documentation. I added unit tests to the `FS.Init` function, then made my changes, then updated the unit tests to capture the new branches. I tested this in our environment, but with SAS token auth and managed identity and it works as expected. --------- Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com> Co-authored-by: Justin Rush <jarush@epic.com> Co-authored-by: Zakhar Bessarab <z.bessarab@victoriametrics.com> Co-authored-by: hagen1778 <roman@victoriametrics.com> (cherry picked from commit 5fd3aef54954c9744a370c5c11e1639cc52049e1)
2024-07-10 09:52:05 +00:00
}
f("/foo/", "foo/")
f("//foo/", "foo/")
f("foo", "foo/")
lib/backup: add support for Azure Managed Identity (#6518) ### Describe Your Changes These changes support using Azure Managed Identity for the `vmbackup` utility. It adds two new environment variables: * `AZURE_USE_DEFAULT_CREDENTIAL`: Instructs the `vmbackup` utility to build a connection using the [Azure Default Credential](https://pkg.go.dev/github.com/Azure/azure-sdk-for-go/sdk/azidentity@v1.5.2#NewDefaultAzureCredential) mode. This causes the Azure SDK to check for a variety of environment variables to try and make a connection. By default, it tries to use managed identity if that is set up. This will close https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984 ### Checklist The following checks are **mandatory**: - [x] My change adheres [VictoriaMetrics contributing guidelines](https://docs.victoriametrics.com/contributing/). ### Testing However you normally test the `vmbackup` utility using Azure Blob should continue to work without any changes. The set up for that is environment specific and not listed out here. Once regression testing has been done you can set up [Azure Managed Identity](https://learn.microsoft.com/en-us/entra/identity/managed-identities-azure-resources/overview) so your resource (AKS, VM, etc), can use that credential method. Once it is set up, update your environment variables according to the updated documentation. I added unit tests to the `FS.Init` function, then made my changes, then updated the unit tests to capture the new branches. I tested this in our environment, but with SAS token auth and managed identity and it works as expected. --------- Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com> Co-authored-by: Justin Rush <jarush@epic.com> Co-authored-by: Zakhar Bessarab <z.bessarab@victoriametrics.com> Co-authored-by: hagen1778 <roman@victoriametrics.com> (cherry picked from commit 5fd3aef54954c9744a370c5c11e1639cc52049e1)
2024-07-10 09:52:05 +00:00
}
lib/backup/azremote: follow-up for 5fd3aef54954c9744a370c5c11e1639cc52049e1 - Mention that credentials can be configured via env variables at both vmbackup and vmrestore docs. - Make clear that the AZURE_STORAGE_DOMAIN env var is optional at https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables - Use string literals as is for env variable names instead of indirecting them via string constants. This makes easier to read and understand the code. These environment variable names aren't going to change in the future, so there is no sense in hiding them under string constants with some other names. - Refer to https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables in error messages when auth creds are improperly configured. This should simplify figuring out how to fix the error. - Simplify the code a bit at FS.newClient(), so it is easier to follow it now. While at it, remove the check when superflouos environment variables are set, since it is too fragile and it looks like it doesn't help properly configuring vmbackup / vmrestore. - Remove envLookuper indirection - just use 'func(name string) (string, bool)' type inline. This simplifies code reading and understanding. - Split TestFSInit() into TestFSInit_Failure() and TestFSInit_Success(). This simplifies the test code, so it should be easier to maintain in the future. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6518 Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984
2024-07-17 15:42:20 +00:00
func TestFSInit_Failure(t *testing.T) {
f := func(envArgs map[string]string, errStrExpected string) {
t.Helper()
lib/backup: add support for Azure Managed Identity (#6518) ### Describe Your Changes These changes support using Azure Managed Identity for the `vmbackup` utility. It adds two new environment variables: * `AZURE_USE_DEFAULT_CREDENTIAL`: Instructs the `vmbackup` utility to build a connection using the [Azure Default Credential](https://pkg.go.dev/github.com/Azure/azure-sdk-for-go/sdk/azidentity@v1.5.2#NewDefaultAzureCredential) mode. This causes the Azure SDK to check for a variety of environment variables to try and make a connection. By default, it tries to use managed identity if that is set up. This will close https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984 ### Checklist The following checks are **mandatory**: - [x] My change adheres [VictoriaMetrics contributing guidelines](https://docs.victoriametrics.com/contributing/). ### Testing However you normally test the `vmbackup` utility using Azure Blob should continue to work without any changes. The set up for that is environment specific and not listed out here. Once regression testing has been done you can set up [Azure Managed Identity](https://learn.microsoft.com/en-us/entra/identity/managed-identities-azure-resources/overview) so your resource (AKS, VM, etc), can use that credential method. Once it is set up, update your environment variables according to the updated documentation. I added unit tests to the `FS.Init` function, then made my changes, then updated the unit tests to capture the new branches. I tested this in our environment, but with SAS token auth and managed identity and it works as expected. --------- Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com> Co-authored-by: Justin Rush <jarush@epic.com> Co-authored-by: Zakhar Bessarab <z.bessarab@victoriametrics.com> Co-authored-by: hagen1778 <roman@victoriametrics.com> (cherry picked from commit 5fd3aef54954c9744a370c5c11e1639cc52049e1)
2024-07-10 09:52:05 +00:00
lib/backup/azremote: follow-up for 5fd3aef54954c9744a370c5c11e1639cc52049e1 - Mention that credentials can be configured via env variables at both vmbackup and vmrestore docs. - Make clear that the AZURE_STORAGE_DOMAIN env var is optional at https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables - Use string literals as is for env variable names instead of indirecting them via string constants. This makes easier to read and understand the code. These environment variable names aren't going to change in the future, so there is no sense in hiding them under string constants with some other names. - Refer to https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables in error messages when auth creds are improperly configured. This should simplify figuring out how to fix the error. - Simplify the code a bit at FS.newClient(), so it is easier to follow it now. While at it, remove the check when superflouos environment variables are set, since it is too fragile and it looks like it doesn't help properly configuring vmbackup / vmrestore. - Remove envLookuper indirection - just use 'func(name string) (string, bool)' type inline. This simplifies code reading and understanding. - Split TestFSInit() into TestFSInit_Failure() and TestFSInit_Success(). This simplifies the test code, so it should be easier to maintain in the future. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6518 Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984
2024-07-17 15:42:20 +00:00
fs := &FS{
Dir: "foo",
}
lib/backup/azremote: follow-up for 5fd3aef54954c9744a370c5c11e1639cc52049e1 - Mention that credentials can be configured via env variables at both vmbackup and vmrestore docs. - Make clear that the AZURE_STORAGE_DOMAIN env var is optional at https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables - Use string literals as is for env variable names instead of indirecting them via string constants. This makes easier to read and understand the code. These environment variable names aren't going to change in the future, so there is no sense in hiding them under string constants with some other names. - Refer to https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables in error messages when auth creds are improperly configured. This should simplify figuring out how to fix the error. - Simplify the code a bit at FS.newClient(), so it is easier to follow it now. While at it, remove the check when superflouos environment variables are set, since it is too fragile and it looks like it doesn't help properly configuring vmbackup / vmrestore. - Remove envLookuper indirection - just use 'func(name string) (string, bool)' type inline. This simplifies code reading and understanding. - Split TestFSInit() into TestFSInit_Failure() and TestFSInit_Success(). This simplifies the test code, so it should be easier to maintain in the future. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6518 Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984
2024-07-17 15:42:20 +00:00
env := testEnv(envArgs)
fs.envLookupFunc = env.LookupEnv
lib/backup: add support for Azure Managed Identity (#6518) ### Describe Your Changes These changes support using Azure Managed Identity for the `vmbackup` utility. It adds two new environment variables: * `AZURE_USE_DEFAULT_CREDENTIAL`: Instructs the `vmbackup` utility to build a connection using the [Azure Default Credential](https://pkg.go.dev/github.com/Azure/azure-sdk-for-go/sdk/azidentity@v1.5.2#NewDefaultAzureCredential) mode. This causes the Azure SDK to check for a variety of environment variables to try and make a connection. By default, it tries to use managed identity if that is set up. This will close https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984 ### Checklist The following checks are **mandatory**: - [x] My change adheres [VictoriaMetrics contributing guidelines](https://docs.victoriametrics.com/contributing/). ### Testing However you normally test the `vmbackup` utility using Azure Blob should continue to work without any changes. The set up for that is environment specific and not listed out here. Once regression testing has been done you can set up [Azure Managed Identity](https://learn.microsoft.com/en-us/entra/identity/managed-identities-azure-resources/overview) so your resource (AKS, VM, etc), can use that credential method. Once it is set up, update your environment variables according to the updated documentation. I added unit tests to the `FS.Init` function, then made my changes, then updated the unit tests to capture the new branches. I tested this in our environment, but with SAS token auth and managed identity and it works as expected. --------- Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com> Co-authored-by: Justin Rush <jarush@epic.com> Co-authored-by: Zakhar Bessarab <z.bessarab@victoriametrics.com> Co-authored-by: hagen1778 <roman@victoriametrics.com> (cherry picked from commit 5fd3aef54954c9744a370c5c11e1639cc52049e1)
2024-07-10 09:52:05 +00:00
err := fs.Init()
lib/backup/azremote: follow-up for 5fd3aef54954c9744a370c5c11e1639cc52049e1 - Mention that credentials can be configured via env variables at both vmbackup and vmrestore docs. - Make clear that the AZURE_STORAGE_DOMAIN env var is optional at https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables - Use string literals as is for env variable names instead of indirecting them via string constants. This makes easier to read and understand the code. These environment variable names aren't going to change in the future, so there is no sense in hiding them under string constants with some other names. - Refer to https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables in error messages when auth creds are improperly configured. This should simplify figuring out how to fix the error. - Simplify the code a bit at FS.newClient(), so it is easier to follow it now. While at it, remove the check when superflouos environment variables are set, since it is too fragile and it looks like it doesn't help properly configuring vmbackup / vmrestore. - Remove envLookuper indirection - just use 'func(name string) (string, bool)' type inline. This simplifies code reading and understanding. - Split TestFSInit() into TestFSInit_Failure() and TestFSInit_Success(). This simplifies the test code, so it should be easier to maintain in the future. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6518 Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984
2024-07-17 15:42:20 +00:00
if err == nil {
t.Fatalf("expecting non-nil error")
}
lib/backup/azremote: follow-up for 5fd3aef54954c9744a370c5c11e1639cc52049e1 - Mention that credentials can be configured via env variables at both vmbackup and vmrestore docs. - Make clear that the AZURE_STORAGE_DOMAIN env var is optional at https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables - Use string literals as is for env variable names instead of indirecting them via string constants. This makes easier to read and understand the code. These environment variable names aren't going to change in the future, so there is no sense in hiding them under string constants with some other names. - Refer to https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables in error messages when auth creds are improperly configured. This should simplify figuring out how to fix the error. - Simplify the code a bit at FS.newClient(), so it is easier to follow it now. While at it, remove the check when superflouos environment variables are set, since it is too fragile and it looks like it doesn't help properly configuring vmbackup / vmrestore. - Remove envLookuper indirection - just use 'func(name string) (string, bool)' type inline. This simplifies code reading and understanding. - Split TestFSInit() into TestFSInit_Failure() and TestFSInit_Success(). This simplifies the test code, so it should be easier to maintain in the future. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6518 Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984
2024-07-17 15:42:20 +00:00
errStr := err.Error()
if !strings.Contains(errStr, errStrExpected) {
t.Fatalf("expecting %q in the error %q", errStrExpected, errStr)
}
lib/backup: add support for Azure Managed Identity (#6518) ### Describe Your Changes These changes support using Azure Managed Identity for the `vmbackup` utility. It adds two new environment variables: * `AZURE_USE_DEFAULT_CREDENTIAL`: Instructs the `vmbackup` utility to build a connection using the [Azure Default Credential](https://pkg.go.dev/github.com/Azure/azure-sdk-for-go/sdk/azidentity@v1.5.2#NewDefaultAzureCredential) mode. This causes the Azure SDK to check for a variety of environment variables to try and make a connection. By default, it tries to use managed identity if that is set up. This will close https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984 ### Checklist The following checks are **mandatory**: - [x] My change adheres [VictoriaMetrics contributing guidelines](https://docs.victoriametrics.com/contributing/). ### Testing However you normally test the `vmbackup` utility using Azure Blob should continue to work without any changes. The set up for that is environment specific and not listed out here. Once regression testing has been done you can set up [Azure Managed Identity](https://learn.microsoft.com/en-us/entra/identity/managed-identities-azure-resources/overview) so your resource (AKS, VM, etc), can use that credential method. Once it is set up, update your environment variables according to the updated documentation. I added unit tests to the `FS.Init` function, then made my changes, then updated the unit tests to capture the new branches. I tested this in our environment, but with SAS token auth and managed identity and it works as expected. --------- Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com> Co-authored-by: Justin Rush <jarush@epic.com> Co-authored-by: Zakhar Bessarab <z.bessarab@victoriametrics.com> Co-authored-by: hagen1778 <roman@victoriametrics.com> (cherry picked from commit 5fd3aef54954c9744a370c5c11e1639cc52049e1)
2024-07-10 09:52:05 +00:00
}
lib/backup/azremote: follow-up for 5fd3aef54954c9744a370c5c11e1639cc52049e1 - Mention that credentials can be configured via env variables at both vmbackup and vmrestore docs. - Make clear that the AZURE_STORAGE_DOMAIN env var is optional at https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables - Use string literals as is for env variable names instead of indirecting them via string constants. This makes easier to read and understand the code. These environment variable names aren't going to change in the future, so there is no sense in hiding them under string constants with some other names. - Refer to https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables in error messages when auth creds are improperly configured. This should simplify figuring out how to fix the error. - Simplify the code a bit at FS.newClient(), so it is easier to follow it now. While at it, remove the check when superflouos environment variables are set, since it is too fragile and it looks like it doesn't help properly configuring vmbackup / vmrestore. - Remove envLookuper indirection - just use 'func(name string) (string, bool)' type inline. This simplifies code reading and understanding. - Split TestFSInit() into TestFSInit_Failure() and TestFSInit_Success(). This simplifies the test code, so it should be easier to maintain in the future. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6518 Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984
2024-07-17 15:42:20 +00:00
var envArgs map[string]string
f(envArgs, "failed to detect credentials for AZBlob")
envArgs = map[string]string{
"AZURE_STORAGE_ACCOUNT_NAME": "test",
}
f(envArgs, "failed to detect credentials for AZBlob")
envArgs = map[string]string{
"AZURE_STORAGE_ACCOUNT_NAME": "",
"AZURE_STORAGE_ACCOUNT_KEY": "!",
}
f(envArgs, "missing AZURE_STORAGE_ACCOUNT_NAME")
envArgs = map[string]string{
"AZURE_STORAGE_ACCOUNT_NAME": "foo",
"AZURE_STORAGE_ACCOUNT_KEY": "!",
}
f(envArgs, "failed to create Shared Key credentials")
envArgs = map[string]string{
"AZURE_STORAGE_ACCOUNT_CONNECTION_STRING": "foobar",
}
f(envArgs, "connection string is either blank or malformed")
envArgs = map[string]string{
"AZURE_STORAGE_ACCOUNT_CONNECTION_STRING": "teapot",
"AZURE_STORAGE_ACCOUNT_NAME": "test",
"AZURE_STORAGE_ACCOUNT_KEY": "dGVhcG90Cg==",
}
f(envArgs, "connection string is either blank or malformed")
envArgs = map[string]string{
"AZURE_USE_DEFAULT_CREDENTIAL": "true",
}
f(envArgs, "missing AZURE_STORAGE_ACCOUNT_NAME")
}
lib/backup: add support for Azure Managed Identity (#6518) ### Describe Your Changes These changes support using Azure Managed Identity for the `vmbackup` utility. It adds two new environment variables: * `AZURE_USE_DEFAULT_CREDENTIAL`: Instructs the `vmbackup` utility to build a connection using the [Azure Default Credential](https://pkg.go.dev/github.com/Azure/azure-sdk-for-go/sdk/azidentity@v1.5.2#NewDefaultAzureCredential) mode. This causes the Azure SDK to check for a variety of environment variables to try and make a connection. By default, it tries to use managed identity if that is set up. This will close https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984 ### Checklist The following checks are **mandatory**: - [x] My change adheres [VictoriaMetrics contributing guidelines](https://docs.victoriametrics.com/contributing/). ### Testing However you normally test the `vmbackup` utility using Azure Blob should continue to work without any changes. The set up for that is environment specific and not listed out here. Once regression testing has been done you can set up [Azure Managed Identity](https://learn.microsoft.com/en-us/entra/identity/managed-identities-azure-resources/overview) so your resource (AKS, VM, etc), can use that credential method. Once it is set up, update your environment variables according to the updated documentation. I added unit tests to the `FS.Init` function, then made my changes, then updated the unit tests to capture the new branches. I tested this in our environment, but with SAS token auth and managed identity and it works as expected. --------- Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com> Co-authored-by: Justin Rush <jarush@epic.com> Co-authored-by: Zakhar Bessarab <z.bessarab@victoriametrics.com> Co-authored-by: hagen1778 <roman@victoriametrics.com> (cherry picked from commit 5fd3aef54954c9744a370c5c11e1639cc52049e1)
2024-07-10 09:52:05 +00:00
lib/backup/azremote: follow-up for 5fd3aef54954c9744a370c5c11e1639cc52049e1 - Mention that credentials can be configured via env variables at both vmbackup and vmrestore docs. - Make clear that the AZURE_STORAGE_DOMAIN env var is optional at https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables - Use string literals as is for env variable names instead of indirecting them via string constants. This makes easier to read and understand the code. These environment variable names aren't going to change in the future, so there is no sense in hiding them under string constants with some other names. - Refer to https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables in error messages when auth creds are improperly configured. This should simplify figuring out how to fix the error. - Simplify the code a bit at FS.newClient(), so it is easier to follow it now. While at it, remove the check when superflouos environment variables are set, since it is too fragile and it looks like it doesn't help properly configuring vmbackup / vmrestore. - Remove envLookuper indirection - just use 'func(name string) (string, bool)' type inline. This simplifies code reading and understanding. - Split TestFSInit() into TestFSInit_Failure() and TestFSInit_Success(). This simplifies the test code, so it should be easier to maintain in the future. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6518 Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984
2024-07-17 15:42:20 +00:00
func TestFSInit_Success(t *testing.T) {
f := func(envArgs map[string]string) {
t.Helper()
fs := &FS{
Dir: "foo",
}
env := testEnv(envArgs)
fs.envLookupFunc = env.LookupEnv
err := fs.Init()
if err != nil {
t.Fatalf("unexpected error at fs.Init(): %s", err)
}
}
envArgs := map[string]string{
"AZURE_STORAGE_ACCOUNT_CONNECTION_STRING": "BlobEndpoint=https://test.blob.core.windows.net/;SharedAccessSignature=",
}
f(envArgs)
envArgs = map[string]string{
"AZURE_STORAGE_ACCOUNT_NAME": "test",
"AZURE_STORAGE_ACCOUNT_KEY": "dGVhcG90Cg==",
}
f(envArgs)
envArgs = map[string]string{
"AZURE_USE_DEFAULT_CREDENTIAL": "true",
"AZURE_STORAGE_ACCOUNT_NAME": "test",
}
f(envArgs)
envArgs = map[string]string{
"AZURE_STORAGE_ACCOUNT_NAME": "test",
"AZURE_STORAGE_ACCOUNT_KEY": "dGVhcG90Cg==",
"AZURE_STORAGE_DOMAIN": "foo.bar",
}
f(envArgs)
lib/backup: add support for Azure Managed Identity (#6518) ### Describe Your Changes These changes support using Azure Managed Identity for the `vmbackup` utility. It adds two new environment variables: * `AZURE_USE_DEFAULT_CREDENTIAL`: Instructs the `vmbackup` utility to build a connection using the [Azure Default Credential](https://pkg.go.dev/github.com/Azure/azure-sdk-for-go/sdk/azidentity@v1.5.2#NewDefaultAzureCredential) mode. This causes the Azure SDK to check for a variety of environment variables to try and make a connection. By default, it tries to use managed identity if that is set up. This will close https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984 ### Checklist The following checks are **mandatory**: - [x] My change adheres [VictoriaMetrics contributing guidelines](https://docs.victoriametrics.com/contributing/). ### Testing However you normally test the `vmbackup` utility using Azure Blob should continue to work without any changes. The set up for that is environment specific and not listed out here. Once regression testing has been done you can set up [Azure Managed Identity](https://learn.microsoft.com/en-us/entra/identity/managed-identities-azure-resources/overview) so your resource (AKS, VM, etc), can use that credential method. Once it is set up, update your environment variables according to the updated documentation. I added unit tests to the `FS.Init` function, then made my changes, then updated the unit tests to capture the new branches. I tested this in our environment, but with SAS token auth and managed identity and it works as expected. --------- Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com> Co-authored-by: Justin Rush <jarush@epic.com> Co-authored-by: Zakhar Bessarab <z.bessarab@victoriametrics.com> Co-authored-by: hagen1778 <roman@victoriametrics.com> (cherry picked from commit 5fd3aef54954c9744a370c5c11e1639cc52049e1)
2024-07-10 09:52:05 +00:00
}
type testEnv map[string]string
func (e testEnv) LookupEnv(key string) (string, bool) {
val, ok := e[key]
return val, ok
}