This section covers the `Models` component of VictoriaMetrics Anomaly Detection (commonly referred to as [`vmanomaly`](https://docs.victoriametrics.com/anomaly-detection/overview/)) and provides a guide on how to configure the service.
> **Note:** Starting from [v1.13.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#v1130), models can be dumped to disk instead of being stored in RAM. This option **slightly reduces inference speed but significantly decreases RAM usage**, particularly useful for larger setups. For more details, see the [relevant FAQ section](https://docs.victoriametrics.com/anomaly-detection/faq/#resource-consumption-of-vmanomaly).
> **Note:** Starting from [v1.10.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#v1100) model section in config supports multiple models via aliasing. <br>Also, `vmanomaly` expects model section to be named `models`. Using old (flat) format with `model` key is deprecated and will be removed in future versions. Having `model` and `models` sections simultaneously in a config will result in only `models` being used:
From [1.10.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#1100), **common args**, supported by *every model (and model type)* were introduced.
Introduced in [1.10.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#1100), as a part to support multi-model configs, `queries` arg is meant to define [queries from VmReader](https://docs.victoriametrics.com/anomaly-detection/components/reader/#config-parameters) particular model should be run on (meaning, all the series returned by each of these queries will be used in such model for fitting and inferencing).
This arg is **backward compatible** - if there is no explicit `queries` arg, then the model, defined in a config, will be run on ALL queries found in reader section:
Introduced in [1.11.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#1110), as a part to support multi-scheduler configs, `schedulers` arg is meant to define [schedulers](https://docs.victoriametrics.com/anomaly-detection/components/scheduler/) particular model should be attached to.
This arg is **backward compatible** - if there is no explicit `schedulers` arg, then the model, defined in a config, will be attached to ALL the schedulers found in scheduler section:
Introduced in [1.12.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#1120), `provide_series` arg limit the [output generated](#vmanomaly-output) by `vmanomaly` for writing. I.e. if the model produces default output series `['anomaly_score', 'yhat', 'yhat_lower', 'yhat_upper']` by specifying `provide_series` section as below, you limit the data being written to only `['anomaly_score']` for each metric received as a subject to anomaly detection.
**Note** If `provide_series` is not specified in model config, the model will produce its default [model-dependent output](#vmanomaly-output). The output can't be less than `['anomaly_score']`. Even if `timestamp` column is omitted, it will be implicitly added to `provide_series` list, as it's required for metrics to be properly written.
Introduced in [1.13.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#1130), `detection_direction` arg can help in reducing the number of [false positives](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#false-positive) and increasing the accuracy, when domain knowledge suggest to identify anomalies occurring when actual values (`y`) are *above, below, or in both directions* relative to the expected values (`yhat`). Available choices are: `both`, `above_expected`, `below_expected`.
Here's how default (backward-compatible) behavior looks like - anomalies will be tracked in `both` directions (`y > yhat` or `y < yhat`). This is useful when there is no domain expertise to filter the required direction.
When set to `above_expected`, anomalies are tracked only when `y > yhat`.
*Example metrics*: Error rate, response time, page load time, number of failed transactions - metrics where *lower values are better*, so **higher** values are typically tracked.
When set to `below_expected`, anomalies are tracked only when `y < yhat`.
*Example metrics*: Service Level Agreement (SLA) compliance, conversion rate, Customer Satisfaction Score (CSAT) - metrics where *higher values are better*, so **lower** values are typically tracked.
Introduced in [v1.13.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#1130), the `min_dev_from_expected` argument is designed to **reduce [false positives](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#false-positive)** in scenarios where deviations between the actual value (`y`) and the expected value (`yhat`) are **relatively** high. Such deviations can cause models to generate high [anomaly scores](https://docs.victoriametrics.com/anomaly-detection/faq/#what-is-anomaly-score). However, these deviations may not be significant enough in **absolute values** from a business perspective to be considered anomalies. This parameter ensures that anomaly scores for data points where `|y - yhat| < min_dev_from_expected` are explicitly set to 0. By default, if this parameter is not set, it behaves as `min_dev_from_expected=0` to maintain backward compatibility.
> **Note**: `min_dev_from_expected` must be >= 0. The higher the value of `min_dev_from_expected`, the fewer data points will be available for anomaly detection, and vice versa.
*Example*: Consider a scenario where CPU utilization is low and oscillates around 0.3% (0.003). A sudden spike to 1.3% (0.013) represents a +333% increase in **relative** terms, but only a +1 percentage point (0.01) increase in **absolute** terms, which may be negligible and not warrant an alert. Setting the `min_dev_from_expected` argument to `0.01` (1%) will ensure that all anomaly scores for deviations <= `0.01` are set to 0.
Visualizations below demonstrate this concept; the green zone defined as the `[yhat - min_dev_from_expected, yhat + min_dev_from_expected]` range excludes actual data points (`y`) from generating anomaly scores if they fall within that range.
Moreover, starting from [v1.15.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#v1150), there exist **[online (incremental) models](#online-models)** subclass. Please refer to the [correspondent section](#online-models) for more details.
For example, if you have some **univariate** model, defined to use 3 [MetricQL queries](https://docs.victoriametrics.com/metricsql/), each returning 5 time series, there will be 3*5=15 models created in total. Each such model produce **individual [output](#vmanomaly-output)** for each of time series.
If during an inference, you got a series having **new labelset** (not present in any of fitted models), the inference will be skipped until you get a model, trained particularly for such labelset during forthcoming re-fit step.
**Implications:** Univariate models are a go-to default, when your queries returns **changing** amount of **individual** time series of **different** magnitude, [trend](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#trend) or [seasonality](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#seasonality), so you won't be mixing incompatible data with different behavior within a single fit model (context isolation).
For example, if you have some **multivariate** model to use 3 [MetricQL queries](https://docs.victoriametrics.com/metricsql/), each returning 5 time series, there will be one shared model created in total. Once fit, this model will expect **exactly 15 time series with exact same labelsets as an input**. This model will produce **one shared [output](#vmanomaly-output)**.
If during an inference, you got a **different amount of series** or some series having a **new labelset** (not present in any of fitted models), the inference will be skipped until you get a model, trained particularly for such labelset during forthcoming re-fit step.
**Implications:** Multivariate models are a go-to default, when your queries returns **fixed** amount of **individual** time series (say, some aggregations), to be used for adding cross-series (and cross-query) context, useful for catching [collective anomalies](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-2/#collective-anomalies) or [novelties](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-2/#novelties) (expanded to multi-input scenario). For example, you may set it up for anomaly detection of CPU usage in different modes (`idle`, `user`, `system`, etc.) and use its cross-dependencies to detect **unseen (in fit data)** behavior.
As a result, such model instances are **not stored** between consecutive re-fit calls (defined by `fit_every` [arg](https://docs.victoriametrics.com/anomaly-detection/components/scheduler/#periodic-scheduler) in `PeriodicScheduler`), leading to **lower RAM** consumption.
Such models put **more pressure** on your reader's source, i.e. if your model should be fit on large amount of data (say, 14 days with 1-minute resolution) and at the same time you have **frequent inference** (say, once per minute) on new chunks of data - that's because such models require (fit + infer) window of data to be fit first to be used later in each inference call.
> **Note**: Rolling models require `fit_every` either to be missing or explicitly set equal to `infer_every` in your [PeriodicScheduler](https://docs.victoriametrics.com/anomaly-detection/components/scheduler/#periodic-scheduler).
Everything that is not classified as [rolling](#rolling-models).
Produced models can be explicitly used to **infer on data, not seen during its fit phase**, thus, it **doesn't require re-fit procedure**.
Such models put **less pressure** on your reader's source, i.e. if you fit on large amount of data (say, 14 days with 1-minute resolution) but do it occasionally (say, once per day), at the same time you have **frequent inference**(say, once per minute) on new chunks of data
> **Note**: However, it's still highly recommended, to keep your model up-to-date with tendencies found in your data as it evolves in time.
Produced model instances are **stored in-memory** between consecutive re-fit calls (defined by `fit_every` [arg](https://docs.victoriametrics.com/anomaly-detection/components/scheduler/#periodic-scheduler) in `PeriodicScheduler`), leading to **higher RAM** consumption.
Introduced in [v1.15.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#v1150), online (incremental) models allow defining a smaller frame `fit_window` and less frequent `fit` calls to reduce the data burden from VictoriaMetrics. They make incremental updates to model parameters during each `infer_every` call, even on a single datapoint.
If the model doesn't support online mode, it's called **offline** (its parameters are only updated during `fit` calls).
Main differences between offline and online:
Fit stage
- Both types have a `fit` stage, run on the `fit_window` data frame.
- For offline models, `fit_window` should contain enough data to train the model (e.g., 2 seasonal periods).
- For online models, training can start gradually from smaller chunks (e.g., 1 hour).
Infer stage
- Both types have an `infer` stage, run on new datapoints (timestamps > last seen timestamp of the previous `infer` call).
- Offline models use a pre-trained (during `fit` call) *static* model to make every `infer` call until the next `fit` call, when the model is completely re-trained.
- Online models use a pre-trained (during `fit` call) *dynamic* model, which is gradually updated during each `infer` call with new datapoints. However, to prevent the model from accumulating outdated behavior, each `fit` call resets the model from scratch.
**Strengths**:
- The ability to distribute the data load evenly between the initial `fit` and subsequent `infer` calls. For example, an online model can be fit on 10 `1m` datapoints during the initial `fit` stage once per month and then be gradually updated on the same 10 `1m` datapoints during each `infer` call each 10 minutes.
- The model can adapt to new data patterns (gradually updating itself during each `infer` call) without needing to wait for the next `fit` call and one big re-training.
- Slightly faster training/updating times compared to similar offline models.
**Limitations**:
- Until the online model sees enough data (especially if the data shows strong seasonality), its predictions might be unstable, producing more [false positives](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#false-positive) (`anomaly_score > 1`) or making [false negative predictions, skipping real anomalies](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#false-negative).
- Not all models (e.g., complex ones like [Prophet](#prophet)) have a direct online alternative, thus their applicability can be somewhat limited.
Each of the ([built-in](#built-in-models) or [custom](#custom-model-guide)) online models (like [`OnlineZscoreModel`](#online-z-score)) shares the following common parameters and properties:
-`n_samples_seen_` (int) - this model *property* refers to the number of datapoints the model was trained on and increases from 0 (before the first `fit`) with each consecutive `infer` call.
-`min_n_samples_seen` (int), optional - this *parameter* defines the minimum number of samples to be seen before reliably computing the [anomaly score](https://docs.victoriametrics.com/anomaly-detection/faq/#what-is-anomaly-score). Otherwise, the anomaly score will be 0 until `n_samples_seen_` > `min_n_samples_seen`, as there is not enough data to trust the model's predictions. For example, if your data has hourly seasonality and '1m' frequency, setting `min_n_samples_seen_` to 288 (1440 minutes in a day / 5 minutes) should be sufficient.
Every other model that isn't [online](#online-models). Offline models are completely re-trained during `fit` call and aren't updated during consecutive `infer` calls.
- **`vmanomaly`-specific** arguments - please refer to *Parameters specific for vmanomaly* and *Default model parameters* subsections for each of the models below.
- Arguments to **inner model** (say, [Facebook's Prophet](https://facebook.github.io/prophet/docs/quick_start.html#python-api)), passed in a `args` argument as key-value pairs, that will be directly given to the model during initialization to allow granular control. Optional.
> **Note**: For users who may not be familiar with Python data types such as `list[dict]`, a [dictionary](https://www.w3schools.com/python/python_dictionaries.asp) in Python is a data structure that stores data values in key-value pairs. This structure allows for efficient data retrieval and management.
* [AutoTuned](#autotuned) - designed to take the cognitive load off the user, allowing any of built-in models below to be re-tuned for best params on data seen during each `fit` phase of the algorithm. Tradeoff is between increased computational time and optimized results / simpler maintenance.
* [Prophet](#prophet) - the most versatile one for production usage, especially for complex data ([trends](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#trend), [change points](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-2/#novelties), [multi-seasonality](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#seasonality))
* [Z-score](#z-score) - useful for initial testing and for simpler data ([de-trended](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#trend) data without strict [seasonality](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#seasonality) and with anomalies of similar magnitude as your "normal" data)
* [Online Z-score](#online-z-score) - [online](#online-models) alternative to [Z-score](#z-score) model with exact same behavior and use cases.
* [Holt-Winters](#holt-winters) - well-suited for **data with moderate complexity**, exhibiting distinct [trends](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#trend) and/or [single seasonal pattern](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#seasonality).
* [MAD (Median Absolute Deviation)](#mad-median-absolute-deviation) - similarly to [Z-score](#z-score), is effective for **identifying outliers in relatively consistent data** (useful for detecting sudden, stark deviations from the median).
* [Online MAD](#online-mad) - approximate [online](#online-models) alternative to [MAD model](#mad-median-absolute-deviation), appropriate for the same use cases.
* [Online Seasonal Quantile](#online-seasonal-quantile) - best used on **[de-trended](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#trend) data with strong (possibly multiple) [seasonalities](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#seasonality)**. Can act as a (slightly less powerful) [online](#online-models) replacement to [`ProphetModel`](#prophet).
* [Seasonal Trend Decomposition](#seasonal-trend-decomposition) - similarly to Holt-Winters, is best for **data with pronounced [seasonal](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#seasonality) and [trend](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#trend) components**
* [Isolation forest (Multivariate)](#isolation-forest-multivariate) - useful for **metrics data interaction** (several queries/metrics -> single anomaly score) and **efficient in detecting anomalies in high-dimensional datasets**
Tuning hyperparameters of a model can be tricky and often requires in-depth knowledge of Machine Learning. `AutoTunedModel` is designed specifically to take the cognitive load off the user - specify as little as `anomaly_percentage` param from `(0, 0.5)` interval and `tuned_model_class` (i.e. [`model.zscore.ZscoreModel`](https://docs.victoriametrics.com/anomaly-detection/components/models/#z-score)) to get it working with best settings that match your data.
*`class` (string) - model class name `"model.auto.AutoTunedModel"` (or `auto` starting from [v1.13.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#1130) with class alias support)
*`tuned_class_name` (string) - Built-in model class to tune, i.e. `model.zscore.ZscoreModel` (or `zscore` starting from [v1.13.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#1130) with class alias support).
*`optimization_params` (dict) - Optimization parameters for unsupervised model tuning. Control % of found anomalies, as well as a tradeoff between time spent and the accuracy. The more `timeout` and `n_trials` are, the better model configuration can be found for `tuned_class_name`, but the longer it takes and vice versa. Set `n_jobs` to `-1` to use all the CPUs available, it makes sense if only you have a big dataset to train on during `fit` calls, otherwise overhead isn't worth it.
-`optimized_business_params` (list[string]) - Starting from [v1.15.0](https://docs.victoriametrics.com/anomaly-detection/v1150) this argument allows particular business-specific parameters such as [`detection_direction`](https://docs.victoriametrics.com/anomaly-detection/components/models/#detection-direction) or [`min_dev_from_expected`](https://docs.victoriametrics.com/anomaly-detection/components/models/#minimal-deviation-from-expected) to remain **unchanged during optimizations, retaining their default values**. I.e. setting `optimized_business_params` to `['detection_direction']` will allow to optimize only `detection_direction` business-specific arg, while `min_dev_from_expected` will retain its default value (0.0). By default and if not set, will be equal to `[]` (empty list), meaning no business params will be optimized. **A recommended option is to leave it empty** for more stable results and increased convergence (less iterations needed for a good result).
-`seed` (int) - Random seed for reproducibility and deterministic nature of underlying optimizations.
-`n_splits` (int) - How many folds to create for hyperparameter tuning out of your data. The higher, the longer it takes but the better the results can be. Defaults to 3.
-`n_trials` (int) - How many trials to sample from hyperparameter search space. The higher, the longer it takes but the better the results can be. Defaults to 128.
-`timeout` (float) - How many seconds in total can be spent on each model to tune hyperparameters. The higher, the longer it takes, allowing to test more trials out of defined `n_trials`, but the better the results can be.
> - `AutoTunedModel` can't be used on [rolling models](https://docs.victoriametrics.com/anomaly-detection/components/models/#rolling-models) like [`RollingQuantile`](https://docs.victoriametrics.com/anomaly-detection/components/models/#rolling-quantile) in combination with [on-disk model storage mode](https://docs.victoriametrics.com/anomaly-detection/faq/#resource-consumption-of-vmanomaly), as the rolling models exists only during `infer` calls and aren't persisted neither in RAM, nor on disk.
Here we utilize the Facebook Prophet implementation, as detailed in their [library documentation](https://facebook.github.io/prophet/docs/quick_start.html#python-api). All parameters from this library are compatible and can be passed to the model.
*`class` (string) - model class name `"model.prophet.ProphetModel"` (or `prophet` starting from [v1.13.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#1130) with class alias support)
*`seasonalities` (list[dict], optional) - Extra seasonalities to pass to Prophet. See [`add_seasonality()`](https://facebook.github.io/prophet/docs/seasonality,_holiday_effects,_and_regressors.html#modeling-holidays-and-special-events:~:text=modeling%20the%20cycle-,Specifying,-Custom%20Seasonalities) Prophet param.
> **Note**: `ZScoreModel` is [univariate](#univariate-models), [non-rolling](#non-rolling-models), [offline](#offline-models) model.
Model is useful for initial testing and for simpler data ([de-trended](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#trend) data without strict [seasonality](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#seasonality) and with anomalies of similar magnitude as your "normal" data).
*`class` (string) - model class name `"model.zscore.ZscoreModel"` (or `zscore` starting from [v1.13.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#1130) with class alias support)
*`z_threshold` (float, optional) - [standard score](https://en.wikipedia.org/wiki/Standard_score) for calculation boundaries and anomaly score. Defaults to `2.5`.
Resulting metrics of the model are described [here](#vmanomaly-output).
### Online Z-score
> **Note**: `OnlineZScoreModel` is [univariate](#univariate-models), [non-rolling](#non-rolling-models), [online](#online-models) model.
Online version of existing [Z-score](#z-score) implementation with the same exact behavior and implications. Introduced in [v1.15.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#v1150)
*`class` (string) - model class name `"model.online.OnlineZscoreModel"` (or `zscore_online` starting from [v1.15.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#1130) with class alias support)
*`z_threshold` (float, optional) - [standard score](https://en.wikipedia.org/wiki/Standard_score) for calculation boundaries and anomaly score. Defaults to `2.5`.
*`min_n_samples_seen` (int, optional) - the minimum number of samples to be seen (`n_samples_seen_` property) before computing the anomaly score. Otherwise, the **anomaly score will be 0**, as there is not enough data to trust the model's predictions. Defaults to 16.
*Config Example*
```yaml
models:
your_desired_alias_for_a_model:
class: "zscore_online" # or 'model.online.OnlineZscoreModel'
z_threshold: 3.5
min_n_samples_seen: 128 # i.e. calculate it as full seasonality / data freq
provide_series: ['anomaly_score', 'yhat'] # common arg example
Here we use Holt-Winters Exponential Smoothing implementation from `statsmodels` [library](https://www.statsmodels.org/dev/generated/statsmodels.tsa.holtwinters.ExponentialSmoothing.html). All parameters from this library can be passed to the model.
*`class` (string) - model class name `"model.holtwinters.HoltWinters"` (or `holtwinters` starting from [v1.13.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#1130) with class alias support)
*`frequency` (string) - Must be set equal to sampling_period. Model needs to know expected data-points frequency (e.g. '10m'). If omitted, frequency is guessed during fitting as **the median of intervals between fitting data timestamps**. During inference, if incoming data doesn't have the same frequency, then it will be interpolated. E.g. data comes at 15 seconds resolution, and our resample_freq is '1m'. Then fitting data will be downsampled to '1m' and internal model is trained at '1m' intervals. So, during inference, prediction data would be produced at '1m' intervals, but interpolated to "15s" to match with expected output, as output data must have the same timestamps. As accepted by pandas.Timedelta (e.g. '5m').
* If [parameter](https://www.statsmodels.org/dev/generated/statsmodels.tsa.holtwinters.ExponentialSmoothing.html#statsmodels.tsa.holtwinters.ExponentialSmoothing-parameters) `seasonal` is not specified, default value will be `add`.
* If [parameter](https://www.statsmodels.org/dev/generated/statsmodels.tsa.holtwinters.ExponentialSmoothing.html#statsmodels.tsa.holtwinters.ExponentialSmoothing-parameters) `initialization_method` is not specified, default value will be `estimated`.
The MAD model is a robust method for anomaly detection that is *less sensitive* to outliers in data compared to standard deviation-based models. It considers a point as an anomaly if the absolute deviation from the median is significantly large.
*`class` (string) - model class name `"model.mad.MADModel"` (or `mad` starting from [v1.13.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#1130) with class alias support)
*`threshold` (float, optional) - The threshold multiplier for the MAD to determine anomalies. Defaults to `2.5`. Higher values will identify fewer points as anomalies.
Resulting metrics of the model are described [here](#vmanomaly-output).
### Online MAD
> **Note**: `OnlineMADModel` is [univariate](#univariate-models), [non-rolling](#non-rolling-models), [online](#online-models) model.
The MAD model is a robust method for anomaly detection that is *less sensitive* to outliers in data compared to standard deviation-based models. It considers a point as an anomaly if the absolute deviation from the median is significantly large. This is the online approximate version, based on [t-digests](https://www.sciencedirect.com/science/article/pii/S2665963820300403) for online quantile estimation. introduced in [v1.15.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#v1150)
*`class` (string) - model class name `"model.online.OnlineMADModel"` (or `mad_online` starting from [v1.13.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#1130) with class alias support)
*`threshold` (float, optional) - The threshold multiplier for the MAD to determine anomalies. Defaults to `2.5`. Higher values will identify fewer points as anomalies.
*`min_n_samples_seen` (int, optional) - the minimum number of samples to be seen (`n_samples_seen_` property) before computing the anomaly score. Otherwise, the **anomaly score will be 0**, as there is not enough data to trust the model's predictions. Defaults to 16.
*`compression` (int, optional) - the compression parameter for underlying [t-digest](https://www.sciencedirect.com/science/article/pii/S2665963820300403). Higher values mean higher accuracy but higher memory usage. By default 100.
> **Note**: `RollingQuantileModel` is [univariate](#univariate-models), [rolling](#rolling-models), [offline](#offline-models) model.
This model is best used on **data with short evolving patterns** (i.e. 10-100 datapoints of particular frequency), as it adapts to changes over a rolling window.
*`class` (string) - model class name `"model.rolling_quantile.RollingQuantileModel"` (or `rolling_quantile` starting from [v1.13.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#1130) with class alias support)
Online (seasonal) quantile utilizes a set of approximate distributions, based on [t-digests](https://www.sciencedirect.com/science/article/pii/S2665963820300403) for online quantile estimation. Introduced in [v1.15.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#v1150).
Best used on **[de-trended](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#trend) data with strong (possibly multiple) [seasonalities](https://victoriametrics.com/blog/victoriametrics-anomaly-detection-handbook-chapter-1/#seasonality)**. Can act as a (slightly less powerful) replacement to [`ProphetModel`](#prophet).
It uses the `quantiles` triplet to calculate `yhat_lower`, `yhat`, and `yhat_upper` [output](#vmanomaly-output), respectively, for each of the `min_subseasons` sub-intervals contained in `seasonal_interval`. For example, with '4d' + '2h' seasonality patterns (multiple), it will hold and update 24*4 / 2 = 48 consecutive estimates (each 2 hours long).
*`class` (string) - model class name `"model.online.OnlineQuantileModel"` (or `quantile_online` starting from [v1.13.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#v1130) with class alias support)
*`quantiles` (list[float], optional) - The quantiles to estimate. `yhat_lower`, `yhat`, `yhat_upper` are the quantile order. By default (0.01, 0.5, 0.99).
*`seasonal_interval` (string, optional) - the interval for the seasonal adjustment. If not set, the model will equal to a simple online quantile model. By default not set.
*`min_subseason` (str, optional) - the minimum interval to estimate quantiles for. By default not set. Note that the minimum interval should be a multiple of the seasonal interval, i.e. if seasonal_interval='2h', then min_subseason='15m' is valid, but '37m' is not.
*`use_transform` (bool, optional) - whether to internally apply a `log1p(abs(x)) * sign(x)` transformation to the data to stabilize internal quantile estimation. Does not affect the scale of produced output (i.e. `yhat`) By default False.
*`global_smoothing` (float, optional) - the smoothing parameter for the global quantiles. i.e. the output is a weighted average of the global and seasonal quantiles (if `seasonal_interval` and `min_subseason` args are set). Should be from `[0, 1]` interval, where 0 means no smoothing and 1 means using only global quantile values.
*`scale` (float, optional) - the scaling factor for the `yhat_lower` and `yhat_upper` quantiles. By default 1.0 (no scaling). if > 1, increases the boundaries [`yhat_lower`, `yhat_upper`] that define "non-anomalous" points. Should be > 0.
*`season_starts_from` (str, optional) - the start date for the seasonal adjustment, as a reference point to start counting the intervals. By default '1970-01-01'.
*`min_n_samples_seen` (int, optional) - the minimum number of samples to be seen (`n_samples_seen_` property) before computing the anomaly score. Otherwise, the **anomaly score will be 0**, as there is not enough data to trust the model's predictions. Defaults to 16.
*`compression` (int, optional) - the compression parameter for the underlying [t-digests](https://www.sciencedirect.com/science/article/pii/S2665963820300403). Higher values mean higher accuracy but higher memory usage. By default 100.
Suppose we have a data with strong intra-day (hourly) and intra-week (daily) seasonality, data granularity is '5m' with up to 5% expected outliers present in data. Then you can apply similar config:
Here we use Seasonal Decompose implementation from `statsmodels` [library](https://www.statsmodels.org/dev/generated/statsmodels.tsa.seasonal.seasonal_decompose.html). Parameters from this library can be passed to the model. Some parameters are specifically predefined in `vmanomaly` and can't be changed by user(`model`='additive', `two_sided`=False).
*`class` (string) - model class name `"model.std.StdModel"` (or `std` starting from [v1.13.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#v1130) with class alias support)
Detects anomalies using binary trees. The algorithm has a linear time complexity and a low memory requirement, which works well with high-volume data. It can be used on both univariate and multivariate data, but it is more effective in multivariate case.
**Important**: Be aware of [the curse of dimensionality](https://en.wikipedia.org/wiki/Curse_of_dimensionality). Don't use single multivariate model if you expect your queries to return many time series of less datapoints that the number of metrics. In such case it is hard for a model to learn meaningful dependencies from too sparse data hypercube.
Here we use Isolation Forest implementation from `scikit-learn` [library](https://scikit-learn.org/stable/modules/generated/sklearn.ensemble.IsolationForest.html). All parameters from this library can be passed to the model.
*`class` (string) - model class name `"model.isolation_forest.IsolationForestMultivariateModel"` (or `isolation_forest_multivariate` starting from [v1.13.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#v1130) with class alias support)
*`contamination` (float or string, optional) - The amount of contamination of the data set, i.e. the proportion of outliers in the data set. Used when fitting to define the threshold on the scores of the samples. Default value - "auto". Should be either `"auto"` or be in the range (0.0, 0.5].
*`seasonal_features` (list of string) - List of seasonality to encode through [cyclical encoding](https://towardsdatascience.com/cyclical-features-encoding-its-about-time-ce23581845ca), i.e. `dow` (day of week). **Introduced in [1.12.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#v1120)**.
- It is designed in such a way that values from 0.0 to 1.0 indicate non-anomalous data.
- A value greater than 1.0 is generally classified as an anomaly, although this threshold can be adjusted in the alerting configuration.
- The decision to set the changepoint at 1 was made to ensure consistency across various models and alerting configurations, such that a score above 1 consistently signifies an anomaly.
-`yhat`: This represents the predicted expected value.
-`yhat_lower`: This indicates the predicted lower boundary.
-`yhat_upper`: This refers to the predicted upper boundary.
-`y`: This is the original value obtained from the query result.
**Important**: Be aware that if `NaN` (Not a Number) or `Inf` (Infinity) values are present in the input data during `infer` model calls, the model will produce `NaN` as the `anomaly_score` for these particular instances.
Each model exposes [several monitoring metrics](https://docs.victoriametrics.com/anomaly-detection/components/monitoring/#models-behaviour-metrics) to its `health_path` endpoint:
Apart from `vmanomaly` [built-in models](https://docs.victoriametrics.com/anomaly-detection/components/models/#built-in-models), users can create their own custom models for anomaly detection.
> **Note**: By default, each custom model is created as [**univariate**](#univariate-models) / [**non-rolling**](#non-rolling-models) model. If you want to override this behavior, define models inherited from `RollingModel` (to get a rolling model), or having `is_multivariate` class arg set to `True` (please refer to the code example below).
**Note**: if your model relies on configs that have `arg` [key-value pair argument, like Prophet](#prophet), do not forget to use Python's `**kwargs` in method's signature and to explicitly call
*`fit` method should contain the model training process. Please be aware that for `RollingModel` defining `fit` method is not needed, as the whole fit/infer process should be defined completely in `infer` method.
For the sake of simplicity, the model in this example will return one of two values of `anomaly_score` - 0 or 1 depending on input parameter `percentage`.
In the config file's `models` section we need to set our model class to `model.custom.CustomModel` (or `custom` starting from [v1.13.0](https://docs.victoriametrics.com/anomaly-detection/changelog/#1130) with class alias support) and define all parameters used in `__init__` method.
You can find out more about configuration parameters in `vmanomaly` [config docs](https://docs.victoriametrics.com/anomaly-detection/components/).
