However, there are some [intentional differences](https://medium.com/@romanhavronenko/victoriametrics-promql-compliance-d4318203f51e) between these two languages.
If you are unfamiliar with PromQL, then it is suggested reading [this tutorial for beginners](https://medium.com/@valyala/promql-tutorial-for-beginners-9ab455142085).
* MetricsQL takes into account the previous point before the window in square brackets for range functions such as [rate](#rate) and [increase](#increase).
This allows returning the exact results users expect for `increase(metric[$__interval])` queries instead of incomplete results Prometheus returns for such queries.
* MetricsQL doesn't extrapolate range function results. This addresses [this issue from Prometheus](https://github.com/prometheus/prometheus/issues/3746).
See technical details about VictoriaMetrics and Prometheus calculations for [rate](#rate)
and [increase](#increase) [in this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1215#issuecomment-850305711).
* MetricsQL returns the expected non-empty responses for [rate](#rate) with `step` values smaller than scrape interval.
This addresses [this issue from Grafana](https://github.com/grafana/grafana/issues/11451).
See also [this blog post](https://www.percona.com/blog/2020/02/28/better-prometheus-rate-function-with-victoriametrics/).
* MetricsQL treats `scalar` type the same as `instant vector` without labels, since subtle differences between these types usually confuse users.
See [the corresponding Prometheus docs](https://prometheus.io/docs/prometheus/latest/querying/basics/#expression-language-data-types) for details.
* MetricsQL removes all the `NaN` values from the output, so some queries like `(-1)^0.5` return empty results in VictoriaMetrics,
while returning a series of `NaN` values in Prometheus. Note that Grafana doesn't draw any lines or dots for `NaN` values,
so the end result looks the same for both VictoriaMetrics and Prometheus.
* MetricsQL keeps metric names after applying functions, which don't change the meaning of the original time series.
For example, [min_over_time(foo)](#min_over_time) or [round(foo)](#round) leaves `foo` metric name in the result.
See [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/674) for details.
Read more about the differences between PromQL and MetricsQL in [this article](https://medium.com/@romanhavronenko/victoriametrics-promql-compliance-d4318203f51e).
Other PromQL functionality should work the same in MetricsQL.
[File an issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues) if you notice discrepancies between PromQL and MetricsQL results other than mentioned above.
and provides additional functionality mentioned below, which is aimed towards solving practical cases.
Feel free [filing a feature request](https://github.com/VictoriaMetrics/VictoriaMetrics/issues) if you think MetricsQL misses certain useful functionality.
This functionality can be evaluated at [VictoriaMetrics playground](https://play.victoriametrics.com/select/accounting/1/6a716b0f-38bc-4856-90ce-448fd713e3fe/prometheus/graph/)
or at your own [VictoriaMetrics instance](https://docs.victoriametrics.com/#how-to-start-victoriametrics).
The list of MetricsQL features:
* Graphite-compatible filters can be passed via `{__graphite__="foo.*.bar"}` syntax.
See [these docs](https://docs.victoriametrics.com/#selecting-graphite-metrics).
VictoriaMetrics also can be used as Graphite datasource in Grafana.
See [these docs](https://docs.victoriametrics.com/#graphite-api-usage) for details.
See also [label_graphite_group](#label_graphite_group) function, which can be used for extracting the given groups from Graphite metric name.
* Lookbehind window in square brackets may be omitted. VictoriaMetrics automatically selects the lookbehind window
depending on the current step used for building the graph (e.g. `step` query arg passed to [/api/v1/query_range](https://docs.victoriametrics.com/keyConcepts.html#range-query)).
For instance, the following query is valid in VictoriaMetrics: `rate(node_network_receive_bytes_total)`.
It is equivalent to `rate(node_network_receive_bytes_total[$__interval])` when used in Grafana.
* [Aggregate functions](#aggregate-functions) accept arbitrary number of args.
For example, `avg(q1, q2, q3)` would return the average values for every point across time series returned by `q1`, `q2` and `q3`.
* [@ modifier](https://prometheus.io/docs/prometheus/latest/querying/basics/#modifier) can be put anywhere in the query.
For example, `sum(foo) @ end()` calculates `sum(foo)` at the `end` timestamp of the selected time range `[start ... end]`.
* Arbitrary subexpression can be used as [@ modifier](https://prometheus.io/docs/prometheus/latest/querying/basics/#modifier).
For example, `foo @ (end() - 1h)` calculates `foo` at the `end - 1 hour` timestamp on the selected time range `[start ... end]`.
* [offset](https://prometheus.io/docs/prometheus/latest/querying/basics/#offset-modifier), lookbehind window in square brackets
and `step` value for [subquery](#subqueries) may refer to the current step aka `$__interval` value from Grafana with `[Ni]` syntax.
For instance, `rate(metric[10i] offset 5i)` would return per-second rate over a range covering 10 previous steps with the offset of 5 steps.
* [offset](https://prometheus.io/docs/prometheus/latest/querying/basics/#offset-modifier) may be put anywhere in the query. For instance, `sum(foo) offset 24h`.
* Numeric values can have `K`, `Ki`, `M`, `Mi`, `G`, `Gi`, `T` and `Ti` suffixes. For example, `8K` is equivalent to `8000`, while `1.2Mi` is equvalent to `1.2*1024*1024`.
**Rollup functions** (aka range functions or window functions) calculate rollups over **raw samples**
on the given lookbehind window for the [selected time series](https://docs.victoriametrics.com/keyConcepts.html#filtering).
For example, `avg_over_time(temperature[24h])` calculates the average temperature over raw samples for the last 24 hours.
Additional details:
* If rollup functions are used for building graphs in Grafana, then the rollup is calculated independently per each point on the graph.
For example, every point for `avg_over_time(temperature[24h])` graph shows the average temperature for the last 24 hours ending at this point.
The interval between points is set as `step` query arg passed by Grafana to [/api/v1/query_range](https://docs.victoriametrics.com/keyConcepts.html#range-query).
* If the given [series selector](https://docs.victoriametrics.com/keyConcepts.html#filtering) returns multiple time series,
then rollups are calculated individually per each returned series.
* If lookbehind window in square brackets is missing, then MetricsQL automatically sets the lookbehind window
to the interval between points on the graph (aka `step` query arg at [/api/v1/query_range](https://docs.victoriametrics.com/keyConcepts.html#range-query),
`$__interval` value from Grafana or `1i` duration in MetricsQL).
For example, `rate(http_requests_total)` is equivalent to `rate(http_requests_total[$__interval])` in Grafana.
It is also equivalent to `rate(http_requests_total[1i])`.
* Every [series selector](https://docs.victoriametrics.com/keyConcepts.html#filtering) in MetricsQL must be wrapped into a rollup function.
Otherwise it is automatically wrapped into [default_rollup](#default_rollup). For example, `foo{bar="baz"}`
is automatically converted to `default_rollup(foo{bar="baz"}[1i])` before performing the calculations.
* If something other than [series selector](https://docs.victoriametrics.com/keyConcepts.html#filtering) is passed to rollup function,
then the inner arg is automatically converted to a [subquery](#subqueries).
* All the rollup functions accept optional `keep_metric_names` modifier. If it is set, then the function keeps metric names in results.
`count_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which calculates the number of raw samples
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
This function is supported by PromQL. See also [count_le_over_time](#count_le_over_time), [count_gt_over_time](#count_gt_over_time),
[count_eq_over_time](#count_eq_over_time) and [count_ne_over_time](#count_ne_over_time).
`decreases_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which calculates the number of raw sample value decreases
over the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
See also [increases_over_time](#increases_over_time).
`default_rollup(series_selector[d])` is a [rollup function](#rollup-functions), which returns the last raw sample value on the given lookbehind window `d`
per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
`distinct_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which returns the number of distinct raw sample values
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
`first_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which returns the first raw sample value
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
See also [last_over_time](#last_over_time) and [tfirst_over_time](#tfirst_over_time).
`geomean_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which calculates [geometric mean](https://en.wikipedia.org/wiki/Geometric_mean)
over raw samples on the given lookbehind window `d` per each time series returned
from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
`histogram_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which calculates
[VictoriaMetrics histogram](https://godoc.org/github.com/VictoriaMetrics/metrics#Histogram) over raw samples on the given lookbehind window `d`.
It is calculated individually per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
The resulting histograms are useful to pass to [histogram_quantile](#histogram_quantile) for calculating quantiles
over multiple [gauges](https://docs.victoriametrics.com/keyConcepts.html#gauge).
For example, the following query calculates median temperature by country over the last 24 hours:
`histogram_quantile(0.5, sum(histogram_over_time(temperature[24h])) by (vmrange,country))`.
`holt_winters(series_selector[d], sf, tf)` is a [rollup function](#rollup-functions), which calculates Holt-Winters value
(aka [double exponential smoothing](https://en.wikipedia.org/wiki/Exponential_smoothing#Double_exponential_smoothing)) for raw samples
over the given lookbehind window `d` using the given smoothing factor `sf` and the given trend factor `tf`.
Both `sf` and `tf` must be in the range `[0...1]`. It is expected that the [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering)
returns time series of [gauge type](https://docs.victoriametrics.com/keyConcepts.html#gauge).
`idelta(series_selector[d])` is a [rollup function](#rollup-functions), which calculates the difference between the last two raw samples
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
This function is supported by PromQL. See also [delta](#delta).
`increase_prometheus(series_selector[d])` is a [rollup function](#rollup-functions), which calculates the increase
over the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
It is expected that the `series_selector` returns time series of [counter type](https://docs.victoriametrics.com/keyConcepts.html#counter).
It doesn't take into account the last sample before the given lookbehind window `d` when calculating the result in the same way as Prometheus does.
See [this article](https://medium.com/@romanhavronenko/victoriametrics-promql-compliance-d4318203f51e) for details.
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
See also [increase_pure](#increase_pure) and [increase](#increase).
`increases_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which calculates the number of raw sample value increases
over the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
See also [decreases_over_time](#decreases_over_time).
`integrate(series_selector[d])` is a [rollup function](#rollup-functions), which calculates the integral over raw samples on the given lookbehind window `d`
per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
`irate(series_selector[d])` is a [rollup function](#rollup-functions), which calculates the "instant" per-second increase rate over the last two raw samples
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
It is expected that the `series_selector` returns time series of [counter type](https://docs.victoriametrics.com/keyConcepts.html#counter).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
This function is supported by PromQL. See also [rate](#rate).
`last_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which returns the last raw sample value on the given lookbehind window `d`
per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
This function is supported by PromQL. See also [first_over_time](#first_over_time) and [tlast_over_time](#tlast_over_time).
`lifetime(series_selector[d])` is a [rollup function](#rollup-functions), which returns the duration in seconds between the last and the first sample
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
See also [duration_over_time](#duration_over_time) and [lag](#lag).
`max_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which calculates the maximum value over raw samples
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
This function is supported by PromQL. See also [tmax_over_time](#tmax_over_time).
`min_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which calculates the minimum value over raw samples
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
This function is supported by PromQL. See also [tmin_over_time](#tmin_over_time).
`mode_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which calculates [mode](https://en.wikipedia.org/wiki/Mode_(statistics))
for raw samples on the given lookbehind window `d`. It is calculated individually per each time series returned
from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering). It is expected that raw sample values are discrete.
`quantile_over_time(phi, series_selector[d])` is a [rollup function](#rollup-functions), which calculates `phi`-quantile over raw samples
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
The `phi` value must be in the range `[0...1]`.
This function is supported by PromQL. See also [quantiles_over_time](#quantiles_over_time).
`range_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which calculates value range over raw samples
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
E.g. it calculates `max_over_time(series_selector[d]) - min_over_time(series_selector[d])`.
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
`rate(series_selector[d])` is a [rollup function](#rollup-functions), which calculates the average per-second increase rate
over the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
It is expected that the `series_selector` returns time series of [counter type](https://docs.victoriametrics.com/keyConcepts.html#counter).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
This function is supported by PromQL. See also [irate](#irate).
`rollup(series_selector[d])` is a [rollup function](#rollup-functions), which calculates `min`, `max` and `avg` values for raw samples
on the given lookbehind window `d` and returns them in time series with `rollup="min"`, `rollup="max"` and `rollup="avg"` additional labels.
These values are calculated individually per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
`rollup_candlestick(series_selector[d])` is a [rollup function](#rollup-functions), which calculates `open`, `high`, `low` and `close` values (aka OHLC)
over raw samples on the given lookbehind window `d` and returns them in time series with `rollup="open"`, `rollup="high"`, `rollup="low"` and `rollup="close"` additional labels.
The calculations are performed individually per each time series returned
from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering). This function is useful for financial applications.
`rollup_delta(series_selector[d])` is a [rollup function](#rollup-functions), which calculates differences between adjacent raw samples
on the given lookbehind window `d` and returns `min`, `max` and `avg` values for the calculated differences
and returns them in time series with `rollup="min"`, `rollup="max"` and `rollup="avg"` additional labels.
The calculations are performed individually per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
`rollup_deriv(series_selector[d])` is a [rollup function](#rollup-functions), which calculates per-second derivatives
for adjacent raw samples on the given lookbehind window `d` and returns `min`, `max` and `avg` values for the calculated per-second derivatives
and returns them in time series with `rollup="min"`, `rollup="max"` and `rollup="avg"` additional labels.
The calculations are performed individually per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
`rollup_increase(series_selector[d])` is a [rollup function](#rollup-functions), which calculates increases for adjacent raw samples
on the given lookbehind window `d` and returns `min`, `max` and `avg` values for the calculated increases
and returns them in time series with `rollup="min"`, `rollup="max"` and `rollup="avg"` additional labels.
The calculations are performed individually per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names. See also [rollup_delta](#rollup_delta).
`rollup_rate(series_selector[d])` is a [rollup function](#rollup-functions), which calculates per-second change rates for adjacent raw samples
on the given lookbehind window `d` and returns `min`, `max` and `avg` values for the calculated per-second change rates
and returns them in time series with `rollup="min"`, `rollup="max"` and `rollup="avg"` additional labels.
The calculations are performed individually per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
`rollup_scrape_interval(series_selector[d])` is a [rollup function](#rollup-functions), which calculates the interval in seconds between
adjacent raw samples on the given lookbehind window `d` and returns `min`, `max` and `avg` values for the calculated interval
and returns them in time series with `rollup="min"`, `rollup="max"` and `rollup="avg"` additional labels.
The calculations are performed individually per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names. See also [scrape_interval](#scrape_interval).
`scrape_interval(series_selector[d])` is a [rollup function](#rollup-functions), which calculates the average interval in seconds between raw samples
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
See also [rollup_scrape_interval](#rollup_scrape_interval).
`stddev_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which calculates standard deviation over raw samples
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
This function is supported by PromQL. See also [stdvar_over_time](#stdvar_over_time).
`stdvar_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which calculates standard variance over raw samples
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
This function is supported by PromQL. See also [stddev_over_time](#stddev_over_time).
`sum_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which calculates the sum of raw sample values
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
`sum2_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which calculates the sum of squares for raw sample values
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
`timestamp(series_selector[d])` is a [rollup function](#rollup-functions), which returns the timestamp in seconds for the last raw sample
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
This function is supported by PromQL. See also [timestamp_with_name](#timestamp_with_name).
`timestamp_with_name(series_selector[d])` is a [rollup function](#rollup-functions), which returns the timestamp in seconds for the last raw sample
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are preserved in the resulting rollups.
`tfirst_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which returns the timestamp in seconds for the first raw sample
on the given lookbehind window `d` per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
`tlast_change_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which returns the timestamp in seconds for the last change
per each time series returned from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering) on the given lookbehind window `d`.
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
`zscore_over_time(series_selector[d])` is a [rollup function](#rollup-functions), which calculates returns [z-score](https://en.wikipedia.org/wiki/Standard_score)
for raw samples on the given lookbehind window `d`. It is calculated independently per each time series returned
from the given [series_selector](https://docs.victoriametrics.com/keyConcepts.html#filtering).
Metric names are stripped from the resulting rollups. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
`acos(q)` is a [transform function](#transform-functions), which returns [inverse cosine](https://en.wikipedia.org/wiki/Inverse_trigonometric_functions)
for every point of every time series returned by `q`.
Metric names are stripped from the resulting series. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
This function is supported by PromQL. See also [asin](#asin) and [cos](#cos).
`acosh(q)` is a [transform function](#transform-functions), which returns
[inverse hyperbolic cosine](https://en.wikipedia.org/wiki/Inverse_hyperbolic_functions#Inverse_hyperbolic_cosine) for every point of every time series returned by `q`.
Metric names are stripped from the resulting series. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
This function is supported by PromQL. See also [sinh](#cosh).
`asinh(q)` is a [transform function](#transform-functions), which returns
[inverse hyperbolic sine](https://en.wikipedia.org/wiki/Inverse_hyperbolic_functions#Inverse_hyperbolic_sine) for every point of every time series returned by `q`.
Metric names are stripped from the resulting series. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
This function is supported by PromQL. See also [sinh](#sinh).
`atan(q)` is a [transform function](#transform-functions), which returns [inverse tangent](https://en.wikipedia.org/wiki/Inverse_trigonometric_functions)
for every point of every time series returned by `q`.
Metric names are stripped from the resulting series. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
This function is supported by PromQL. See also [tan](#tan).
`atanh(q)` is a [transform function](#transform-functions), which returns
[inverse hyperbolic tangent](https://en.wikipedia.org/wiki/Inverse_hyperbolic_functions#Inverse_hyperbolic_tangent) for every point of every time series returned by `q`.
Metric names are stripped from the resulting series. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
This function is supported by PromQL. See also [tanh](#tanh).
`bitmap_and(q, mask)` is a [transform function](#transform-functions), which calculates bitwise `v & mask` for every `v` point of every time series returned from `q`.
Metric names are stripped from the resulting series. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
`bitmap_or(q, mask)` is a [transform function](#transform-functions), which calculates bitwise `v | mask` for every `v` point of every time series returned from `q`.
Metric names are stripped from the resulting series. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
`bitmap_xor(q, mask)` is a [transform function](#transform-functions), which calculates bitwise `v ^ mask` for every `v` point of every time series returned from `q`.
Metric names are stripped from the resulting series. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
`ceil(q)` is a [transform function](#transform-functions), which rounds every point for every time series returned by `q` to the upper nearest integer.
This function is supported by PromQL. See also [floor](#floor) and [round](#round).
`clamp(q, min, max)` is a [transform function](#transform-functions), which clamps every point for every time series returned by `q` with the given `min` and `max` values.
This function is supported by PromQL. See also [clamp_min](#clamp_min) and [clamp_max](#clamp_max).
`clamp_max(q, max)` is a [transform function](#transform-functions), which clamps every point for every time series returned by `q` with the given `max` value.
This function is supported by PromQL. See also [clamp](#clamp) and [clamp_min](#clamp_min).
`clamp_min(q, min)` is a [transform function](#transform-functions), which clamps every point for every time series returned by `q` with the given `min` value.
This function is supported by PromQL. See also [clamp](#clamp) and [clamp_max](#clamp_max).
`day_of_month(q)` is a [transform function](#transform-functions), which returns the day of month for every point of every time series returned by `q`.
It is expected that `q` returns unix timestamps. The returned values are in the range `[1...31]`.
Metric names are stripped from the resulting series. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
`floor(q)` is a [transform function](#transform-functions), which rounds every point for every time series returned by `q` to the lower nearest integer.
This function is supported by PromQL. See also [ceil](#ceil) and [round](#round).
`histogram_quantile(phi, buckets)` is a [transform function](#transform-functions), which calculates `phi`-[percentile](https://en.wikipedia.org/wiki/Percentile)
over the given [histogram buckets](https://valyala.medium.com/improving-histogram-usability-for-prometheus-and-grafana-bc7e5df0e350).
`phi` must be in the range `[0...1]`. For example, `histogram_quantile(0.5, sum(rate(http_request_duration_seconds_bucket[5m]) by (le))`
would return median request duration for all the requests during the last 5 minutes.
The function accepts optional third arg - `boundsLabel`. In this case it returns `lower` and `upper` bounds for the estimated percentile with the given `boundsLabel` label.
See [this issue for details](https://github.com/prometheus/prometheus/issues/5706).
This function is supported by PromQL (except of the `boundLabel` arg). See also [histogram_quantiles](#histogram_quantiles), [histogram_share](#histogram_share)
`histogram_quantiles("phiLabel", phi1, ..., phiN, buckets)` is a [transform function](#transform-functions), which calculates the given `phi*`-quantiles
over the given [histogram buckets](https://valyala.medium.com/improving-histogram-usability-for-prometheus-and-grafana-bc7e5df0e350).
Argument `phi*` must be in the range `[0...1]`. For example, `histogram_quantiles('le', 0.3, 0.5, sum(rate(http_request_duration_seconds_bucket[5m]) by (le))`.
Each calculated quantile is returned in a separate time series with the corresponding `{phiLabel="phi*"}` label.
See also [histogram_quantile](#histogram_quantile).
The function accepts optional third arg - `boundsLabel`. In this case it returns `lower` and `upper` bounds for the estimated share with the given `boundsLabel` label.
`rand_exponential(seed)` is a [transform function](#transform-functions), which returns pseudo-random numbers
with [exponential distribution](https://en.wikipedia.org/wiki/Exponential_distribution). Optional `seed` can be used as a seed for pseudo-random number generator.
See also [rand](#rand) and [rand_normal](#rand_normal).
`rand_normal(seed)` is a [transform function](#transform-functions), which returns pseudo-random numbers
with [normal distribution](https://en.wikipedia.org/wiki/Normal_distribution). Optional `seed` can be used as a seed for pseudo-random number generator.
See also [rand](#rand) and [rand_exponential](#rand_exponential).
`range_linear_regression(q)` is a [transform function](#transform-functions), which calculates [simple linear regression](https://en.wikipedia.org/wiki/Simple_linear_regression)
over the selected time range per each time series returned by `q`. This function is useful for capacity planning and predictions.
`range_median(q)` is a [transform function](#transform-functions), which calculates the median value across points per each time series returned by `q`.
`range_normalize(q1, ...)` is a [transform function](#transform-functions), which normalizes values for time series returned by `q1, ...` into `[0 ... 1]` range.
This function is useful for correlating time series with distinct value ranges.
`range_quantile(phi, q)` is a [transform function](#transform-functions), which returns `phi`-quantile across points per each time series returned by `q`.
`range_stddev(q)` is a [transform function](#transform-functions), which calculates [standard deviation](https://en.wikipedia.org/wiki/Standard_deviation)
per each time series returned by `q` on the selected time range.
#### range_stdvar
`range_stdvar(q)` is a [transform function](#transform-functions), which calculates [standard variance](https://en.wikipedia.org/wiki/Variance)
per each time series returned by `q` on the selected time range.
`range_trim_spikes(phi, q)` is a [transform function](#transform-functions), which drops `phi` percent of biggest spikes from time series returned by `q`.
The `phi` must be in the range `[0..1]`, where `0` means `0%` and `1` means `100%`.
`round(q, nearest)` is a [transform function](#transform-functions), which rounds every point of every time series returned by `q` to the `nearest` multiple.
If `nearest` is missing then the rounding is performed to the nearest integer.
This function is supported by PromQL. See also [floor](#floor) and [ceil](#ceil).
`ru(free, max)` is a [transform function](#transform-functions), which calculates resource utilization in the range `[0%...100%]` for the given `free` and `max` resources.
For instance, `ru(node_memory_MemFree_bytes, node_memory_MemTotal_bytes)` returns memory utilization over [node_exporter](https://github.com/prometheus/node_exporter) metrics.
`scalar(q)` is a [transform function](#transform-functions), which returns `q` if `q` contains only a single time series. Otherwise it returns nothing.
`sort(q)` is a [transform function](#transform-functions), which sorts series in ascending order by the last point in every time series returned by `q`.
This function is supported by PromQL. See also [sort_desc](#sort_desc) and [sort_by_label](#sort_by_label).
`sort_desc(q)` is a [transform function](#transform-functions), which sorts series in descending order by the last point in every time series returned by `q`.
This function is supported by PromQL. See also [sort](#sort) and [sort_by_label](#sort_by_label_desc).
`alias(q, "name")` is [label manipulation function](#label-manipulation-functions), which sets the given `name` to all the time series returned by `q`.
For example, `alias(up, "foobar")` would rename `up` series to `foobar` series.
`label_graphite_group(q, groupNum1, ... groupNumN)` is [label manipulation function](#label-manipulation-functions), which replaces metric names
returned from `q` with the given Graphite group values concatenated via `.` char.
For example, `label_graphite_group({__graphite__="foo*.bar.*"}, 0, 2)` would substitute `foo<any_value>.bar.<other_value>` metric names with `foo<any_value>.<other_value>`.
This function is useful for aggregating Graphite metrics with [aggregate functions](#aggregate-functions). For example, the following query would return per-app memory usage:
`sort_by_label(q, label1, ... labelN)` is [label manipulation function](#label-manipulation-functions), which sorts series in ascending order by the given set of labels.
For example, `sort_by_label(foo, "bar")` would sort `foo` series by values of the label `bar` in these series.
See also [sort_by_label_desc](#sort_by_label_desc) and [sort_by_label_numeric](#sort_by_label_numeric).
#### sort_by_label_desc
`sort_by_label_desc(q, label1, ... labelN)` is [label manipulation function](#label-manipulation-functions), which sorts series in descending order by the given set of labels.
For example, `sort_by_label(foo, "bar")` would sort `foo` series by values of the label `bar` in these series.
See also [sort_by_label](#sort_by_label) and [sort_by_label_numeric_desc](#sort_by_label_numeric_desc).
#### sort_by_label_numeric
`sort_by_label_numeric(q, label1, ... labelN)` is [label manipulation function](#label-manipulation-functions), which sorts series in ascending order by the given set of labels
using [numeric sort](https://www.gnu.org/software/coreutils/manual/html_node/Version-sort-is-not-the-same-as-numeric-sort.html).
For example, if `foo` series have `bar` label with values `1`, `101`, `15` and `2`, then `sort_by_label_numeric(foo, "bar")` would return series
in the following order of `bar` label values: `1`, `2`, `15` and `101`.
See also [sort_by_label_numeric_desc](#sort_by_label_numeric_desc) and [sort_by_label](#sort_by_label).
#### sort_by_label_numeric_desc
`sort_by_label_numeric_desc(q, label1, ... labelN)` is [label manipulation function](#label-manipulation-functions), which sorts series in descending order
by the given set of labels using [numeric sort](https://www.gnu.org/software/coreutils/manual/html_node/Version-sort-is-not-the-same-as-numeric-sort.html).
For example, if `foo` series have `bar` label with values `1`, `101`, `15` and `2`, then `sort_by_label_numeric(foo, "bar")`
would return series in the following order of `bar` label values: `101`, `15`, `2` and `1`.
See also [sort_by_label_numeric](#sort_by_label_numeric) and [sort_by_label_desc](#sort_by_label_desc).
`any(q) by (group_labels)` is [aggregate function](#aggregate-functions), which returns a single series per `group_labels` out of time series returned by `q`.
`avg(q) by (group_labels)` is [aggregate function](#aggregate-functions), which returns the average value per `group_labels` for time series returned by `q`.
The aggregate is calculated individually per each group of points with the same timestamp.
`bottomk(k, q)` is [aggregate function](#aggregate-functions), which returns up to `k` points with the smallest values across all the time series returned by `q`.
The aggregate is calculated individually per each group of points with the same timestamp.
This function is supported by PromQL. See also [topk](#topk).
`bottomk_avg(k, q, "other_label=other_value")` is [aggregate function](#aggregate-functions), which returns up to `k` time series from `q` with the smallest averages.
If an optional `other_label=other_value` arg is set, then the sum of the remaining time series is returned with the given label.
For example, `bottomk_avg(3, sum(process_resident_memory_bytes) by (job), "job=other")` would return up to 3 time series
with the smallest averages plus a time series with `{job="other"}` label with the sum of the remaining series if any.
`bottomk_last(k, q, "other_label=other_value")` is [aggregate function](#aggregate-functions), which returns up to `k` time series from `q` with the smallest last values.
If an optional `other_label=other_value` arg is set, then the sum of the remaining time series is returned with the given label.
For example, `bottomk_max(3, sum(process_resident_memory_bytes) by (job), "job=other")` would return up to 3 time series
with the smallest maximums plus a time series with `{job="other"}` label with the sum of the remaining series if any.
`bottomk_max(k, q, "other_label=other_value")` is [aggregate function](#aggregate-functions), which returns up to `k` time series from `q` with the smallest maximums.
If an optional `other_label=other_value` arg is set, then the sum of the remaining time series is returned with the given label.
For example, `bottomk_max(3, sum(process_resident_memory_bytes) by (job), "job=other")` would return up to 3 time series
with the smallest maximums plus a time series with `{job="other"}` label with the sum of the remaining series if any.
`bottomk_median(k, q, "other_label=other_value")` is [aggregate function](#aggregate-functions), which returns up to `k` time series from `q` with the smallest medians.
If an optional`other_label=other_value` arg is set, then the sum of the remaining time series is returned with the given label.
For example, `bottomk_median(3, sum(process_resident_memory_bytes) by (job), "job=other")` would return up to 3 time series
with the smallest medians plus a time series with `{job="other"}` label with the sum of the remaining series if any.
`bottomk_min(k, q, "other_label=other_value")` is [aggregate function](#aggregate-functions), which returns up to `k` time series from `q` with the smallest minimums.
If an optional `other_label=other_value` arg is set, then the sum of the remaining time series is returned with the given label.
For example, `bottomk_min(3, sum(process_resident_memory_bytes) by (job), "job=other")` would return up to 3 time series
with the smallest minimums plus a time series with `{job="other"}` label with the sum of the remaining series if any.
`distinct(q)` is [aggregate function](#aggregate-functions), which calculates the number of unique values per each group of points with the same timestamp.
`mad(q) by (group_labels)` is [aggregate function](#aggregate-functions), which returns the [Median absolute deviation](https://en.wikipedia.org/wiki/Median_absolute_deviation)
per each `group_labels` for all the time series returned by `q`. The aggregate is calculated individually per each group of points with the same timestamp.
See also [outliers_mad](#outliers_mad) and [stddev](#stddev).
`mode(q) by (group_labels)` is [aggregate function](#aggregate-functions), which returns [mode](https://en.wikipedia.org/wiki/Mode_(statistics))
per each `group_labels` for all the time series returned by `q`. The aggregate is calculated individually per each group of points with the same timestamp.
`outliersk(k, q)` is [aggregate function](#aggregate-functions), which returns up to `k` time series with the biggest standard deviation (aka outliers)
`topk(k, q)` is [aggregate function](#aggregate-functions), which returns up to `k` points with the biggest values across all the time series returned by `q`.
The aggregate is calculated individually per each group of points with the same timestamp.
This function is supported by PromQL. See also [bottomk](#bottomk).
`topk_avg(k, q, "other_label=other_value")` is [aggregate function](#aggregate-functions), which returns up to `k` time series from `q` with the biggest averages.
If an optional `other_label=other_value` arg is set, then the sum of the remaining time series is returned with the given label.
For example, `topk_avg(3, sum(process_resident_memory_bytes) by (job), "job=other")` would return up to 3 time series with the biggest averages
plus a time series with `{job="other"}` label with the sum of the remaining series if any.
`topk_last(k, q, "other_label=other_value")` is [aggregate function](#aggregate-functions), which returns up to `k` time series from `q` with the biggest last values.
If an optional `other_label=other_value` arg is set, then the sum of the remaining time series is returned with the given label.
For example, `topk_max(3, sum(process_resident_memory_bytes) by (job), "job=other")` would return up to 3 time series with the biggest maximums
plus a time series with `{job="other"}` label with the sum of the remaining series if any.
`topk_max(k, q, "other_label=other_value")` is [aggregate function](#aggregate-functions), which returns up to `k` time series from `q` with the biggest maximums.
If an optional `other_label=other_value` arg is set, then the sum of the remaining time series is returned with the given label.
For example, `topk_max(3, sum(process_resident_memory_bytes) by (job), "job=other")` would return up to 3 time series with the biggest maximums
plus a time series with `{job="other"}` label with the sum of the remaining series if any.
`topk_median(k, q, "other_label=other_value")` is [aggregate function](#aggregate-functions), which returns up to `k` time series from `q` with the biggest medians.
If an optional `other_label=other_value` arg is set, then the sum of the remaining time series is returned with the given label.
For example, `topk_median(3, sum(process_resident_memory_bytes) by (job), "job=other")` would return up to 3 time series with the biggest medians
plus a time series with `{job="other"}` label with the sum of the remaining series if any.
`topk_min(k, q, "other_label=other_value")` is [aggregate function](#aggregate-functions), which returns up to `k` time series from `q` with the biggest minimums.
If an optional `other_label=other_value` arg is set, then the sum of the remaining time series is returned with the given label.
For example, `topk_min(3, sum(process_resident_memory_bytes) by (job), "job=other")` would return up to 3 time series with the biggest minimums
plus a time series with `{job="other"}` label with the sum of the remaining series if any.
`zscore(q) by (group_labels)` is [aggregate function](#aggregate-functions), which returns [z-score](https://en.wikipedia.org/wiki/Standard_score) values
per each `group_labels` for all the time series returned by `q`. The aggregate is calculated individually per each group of points with the same timestamp.
This function is useful for detecting anomalies in the group of related time series.
MetricsQL supports and extends PromQL subqueries. See [this article](https://valyala.medium.com/prometheus-subqueries-in-victoriametrics-9b1492b720b3) for details.
Any [rollup function](#rollup-functions) for something other than [series selector](https://docs.victoriametrics.com/keyConcepts.html#filtering) form a subquery.
Nested rollup functions can be implicit thanks to the [implicit query conversions](#implicit-query-conversions).
For example, `delta(sum(m))` is implicitly converted to `delta(sum(default_rollup(m[1i]))[1i:1i])`, so it becomes a subquery,
since it contains [default_rollup](#default_rollup) nested into [delta](#delta).
* If lookbehind window in square brackets is missing inside [rollup function](#rollup-functions),
then `[1i]` is automatically added there. The `[1i]` means one `step` value, which is passed
to [/api/v1/query_range](https://docs.victoriametrics.com/keyConcepts.html#range-query).
It is also known as `$__interval` in Grafana. For example, `rate(http_requests_count)` is automatically transformed to `rate(http_requests_count[1i])`.
* All the [series selectors](https://docs.victoriametrics.com/keyConcepts.html#filtering),
which aren't wrapped into [rollup functions](#rollup-functions), are automatically wrapped into [default_rollup](#default_rollup) function.
