- *vmanomaly* is a part of enterprise package. You can get license key [here](https://victoriametrics.com/products/enterprise/trial) to try this tutorial.
- It is assumed that you are familiar with [Grafana](https://grafana.com/)(v.10.2.1) and [Docker](https://docs.docker.com/get-docker/) and [Docker Compose](https://docs.docker.com/compose/).
*VictoriaMetrics Anomaly Detection* ([vmanomaly](https://docs.victoriametrics.com/vmanomaly.html)) is a service that continuously scans time series stored in VictoriaMetrics and detects unexpected changes within data patterns in real-time. It does so by utilizing user-configurable machine learning models.
All the service parameters are defined in a config file.
A single config file supports only one model. It is ok to run multiple vmanomaly processes, each using its own config.
**vmanomaly** does the following:
- periodically queries user-specified metrics
- computes an **anomaly score** for them
- pushes back the computed **anomaly score** to VictoriaMetrics.
### What is anomaly score?
**Anomaly score** is a calculated non-negative (in interval [0, +inf)) numeric value. It takes into account how well data fit a predicted distribution, periodical patterns, trends, seasonality, etc.
The value is designed to:
- *fall between 0 and 1* if model consider that datapoint is following usual pattern,
- *exceed 1* if the datapoint is abnormal.
Then, users can enable alerting rules based on the **anomaly score** with [vmalert](#what-is-vmalert).
[vmalert](https://docs.victoriametrics.com/vmalert.html) is an alerting tool for VictoriaMetrics. It executes a list of the given alerting or recording rules against configured `-datasource.url`.
[Alerting rules](https://docs.victoriametrics.com/vmalert.html#alerting-rules) allow you to define conditions that, when met, will notify the user. The alerting condition is defined in a form of a query expression via [MetricsQL query language](https://docs.victoriametrics.com/MetricsQL.html). For example, in our case, the expression `anomaly_score > 1.0` will notify a user when the calculated anomaly score exceeds a threshold of 1.
Compared to classical alerting rules, anomaly detection is more "hands-off" and data-aware. Instead of thinking of critical conditions to define, user can rely on catching anomalies that were not expected to happen. In other words, by setting up alerting rules, a user must know what to look for, ahead of time, while anomaly detection looks for any deviations from past behavior.
Practical use case is to put anomaly score generated by vmanomaly into alerting rules with some threshold.
**In this tutorial we are going to:**
- Configure docker-compose file with all needed services ([VictoriaMetrics](https://docs.victoriametrics.com/Single-server-VictoriaMetrics.html), [vmalert](https://docs.victoriametrics.com/vmalert.html), [vmagent](https://docs.victoriametrics.com/vmagent.html), [Grafana](https://grafana.com/), [Node Exporter](https://prometheus.io/docs/guides/node-exporter/) and [vmanomaly](https://docs.victoriametrics.com/vmanomaly.html) ).
- Explore configuration files for [vmanomaly](https://docs.victoriametrics.com/vmanomaly.html) and [vmalert](https://docs.victoriametrics.com/vmalert.html).
- Run our own [VictoriaMetrics](https://docs.victoriametrics.com/Single-server-VictoriaMetrics.html) database with data scraped from [Node Exporter](https://prometheus.io/docs/guides/node-exporter/).
- Explore data for analysis in [Grafana](https://grafana.com/).
Let's talk about data used for anomaly detection in this tutorial.
We are going to collect our own CPU usage data with [Node Exporter](https://prometheus.io/docs/guides/node-exporter/) into the VictoriaMetrics database.
On a Node Exporter's metrics page, part of the output looks like this:
```
# HELP node_cpu_seconds_total Seconds the CPUs spent in each mode.
Here, metric `node_cpu_seconds_total` tells us how many seconds each CPU spent in different modes: _user_, _system_, _iowait_, _idle_, _irq&softirq_, _guest_, or _steal_.
These modes are mutually exclusive. A high _iowait_ means that you are disk or network bound, high _user_ or _system_ means that you are CPU bound.
The metric `node_cpu_seconds_total` is a [counter](https://docs.victoriametrics.com/keyConcepts.html#counter) type of metric. If we'd like to see how much time CPU spent in each of the nodes, we need to calculate the per-second values change via [rate function](https://docs.victoriametrics.com/MetricsQL.html#rate): `rate(node_cpu_seconds_total)`.
This query result will generate 8 time series per each cpu, and we will use them as an input for our VM Anomaly Detection. vmanomaly will start learning configured model type separately for each of the time series.
`scheduler` - defines how often to run and make inferences, as well as what timerange to use to train the model.
`model` - specific model parameters and configurations,
`reader` - how to read data and where it is located
`writer` - where and how to write the generated output.
Let's look into parameters in each section:
*`scheduler`
*`infer_every` - how often trained models will make inferences on new data. Basically, how often to generate new datapoints for anomaly_score. Format examples: 30s, 4m, 2h, 1d. Time granularity ('s' - seconds, 'm' - minutes, 'h' - hours, 'd' - days).
You can look at this as how often a model will write its conclusions on newly added data. Here in example we are asking every 1 minute: based on the previous data, do these new datapoints look abnormal?
*`fit_every` - how often to retrain the models. The higher the frequency -- the fresher the model, but the more CPU it consumes. If omitted, the models will be retrained on each infer_every cycle. Format examples: 30s, 4m, 2h, 1d. Time granularity ('s' - seconds, 'm' - minutes, 'h' - hours, 'd' - days).
*`fit_window` - what data interval to use for model training. Longer intervals capture longer historical behavior and detect seasonalities better, but is slower to adapt to permanent changes to metrics behavior. Recommended value is at least two full seasons. Format examples: 30s, 4m, 2h, 1d. Time granularity ('s' - seconds, 'm' - minutes, 'h' - hours, 'd' - days).
Here is the previous 14 days of data to put into the model training.
*`class` - what model to run. You can use your own model or choose from built-in models: Seasonal Trend Decomposition, Facebook Prophet, ZScore, Rolling Quantile, Holt-Winters, Isolation Forest and ARIMA. Here we use Facebook Prophet (`model.prophet.ProphetModel`).
*`args` - Model specific parameters, represented as YAML dictionary in a simple `key: value` form. For example, you can use parameters that are available in [FB Prophet](https://facebook.github.io/prophet/docs/quick_start.html).
As the result of running vmanomaly, it produces the following metrics:
-`anomaly_score` - the main one. Ideally, if it is between 0.0 and 1.0 it is considered to be a non-anomalous value. If it is greater than 1.0, it is considered an anomaly (but you can reconfigure that in alerting config, of course),
-`yhat` - predicted expected value,
-`yhat_lower` - predicted lower boundary,
-`yhat_upper` - predicted upper boundary,
-`y` - initial query result value.
Here is an example of how output metric will be written into VictoriaMetrics:
Here we provide an example of the config for vmalert `vmalert_config.yml`.
<divclass="with-copy"markdown="1">
``` yaml
groups:
- name: AnomalyExample
rules:
- alert: HighAnomalyScore
expr: 'anomaly_score > 1.0'
labels:
severity: warning
annotations:
summary: Anomaly Score exceeded 1.0. `rate(node_cpu_seconds_total)` is showing abnormal behavior.
```
</div>
In the query expression we need to put a condition on the generated anomaly scores. Usually if the anomaly score is between 0.0 and 1.0, the analyzed value is not abnormal. The more anomaly score exceeded 1 the more our model is sure that value is an anomaly.
You can choose your threshold value that you consider reasonable based on the anomaly score metric, generated by vmanomaly. One of the best ways is to estimate it visually, by plotting the `anomaly_score` metric, along with predicted "expected" range of `yhat_lower` and `yhat_upper`. Later in this tutorial we will show an example
* victoriametrics - VictoriaMetrics Time Series Database
* vmagent - is an agent which helps you collect metrics from various sources, relabel and filter the collected metrics and store them in VictoriaMetrics or any other storage systems via Prometheus remote_write protocol.
* node-exporter - Prometheus [Node Exporter](https://prometheus.io/docs/guides/node-exporter/) exposes a wide variety of hardware- and kernel-related metrics.
<br>Check out if the anomaly score is high for datapoints you think are anomalies. If not, you can try other parameters in the config file or try other model type.
As you may notice a lot of data shows anomaly score greater than 1. It is expected as we just started to scrape and store data and there are not enough datapoints to train on. Just wait for some more time for gathering more data to see how well this particular model can find anomalies. In our configs we put 2 days of data required.
### Actual value from input query with predicted `yhat` metric.
<br>Here we are using one particular set of metrics for visualization. Check out the difference between model prediction and actual values. If values are very different from prediction, it can be considered as anomalous.
According to the rule configured for vmalert we will see Alert when anomaly score exceed 1. You will see an alert on Alert tab. `http://localhost:8880/vmalert/alerts`
Now we know how to set up Victoria Metric Anomaly Detection tool and use it together with vmalert. We also discovered core vmanomaly generated metrics and behaviour.
