VictoriaMetrics/deployment/docker/rules/alerts-vmanomaly.yml

# This file provides a recommended list of alerts to monitor the health of VictoriaMetrics Anomaly Detection (vmanomaly).
# Note: The alerts below are general recommendations and may require customization,
# including threshold adjustments, to suit the specifics of your setup.

groups:
    # Note - Adjust the `job` filter to match your specific setup.
    # By default, the `job` label for vmanomaly in push-based self-monitoring mode is set to `vmanomaly`.
    # However, this can be overridden using additional labels. For further details, refer to the example here:
    # https://docs.victoriametrics.com/anomaly-detection/components/monitoring/?highlight=extra_labels#monitoring-section-config-example
  - name: vmanomaly-health
    rules:
      - alert: TooManyRestarts
        expr: changes(process_start_time_seconds{job=~".*vmanomaly.*"}[15m]) > 2
        labels:
          severity: critical
        annotations:
          summary: "{{ $labels.job }} too many restarts (instance {{ $labels.instance }})"
          description: |
            Job {{ $labels.job }} (instance {{ $labels.instance }}) has restarted more than twice in the last 15 minutes.
            It might be crashlooping. Please check the logs for more details.
            Additionally, refer to the "r:errors" value in the "Instance Overview" section of the self-monitoring Grafana dashboard.

      # works if you use Prometheus scraping (pull model only)
      - alert: ServiceDown
        expr: up{job=~".*vmanomaly.*"} == 0
        for: 5m
        labels:
          severity: critical
        annotations:
          summary: "Service {{ $labels.job }} is down on {{ $labels.instance }}"
          description: "{{ $labels.instance }} of job {{ $labels.job }} has been down for more than 5m"

      - alert: ProcessNearFDLimits
        expr: (process_max_fds{job=~".*vmanomaly.*"} - process_open_fds{job=~".*vmanomaly.*"}) < 100
        for: 5m
        labels:
          severity: critical
        annotations:
          summary: "Number of free file descriptors is less than 100 for \"{{ $labels.job }}\"(\"{{ $labels.instance }}\") for the last 5m"
          description: |
            Exhausting OS file descriptors limit can cause severe degradation of the process.
            Consider to increase the limit as fast as possible.

      - alert: TooHighCPUUsage
        expr: > 
          sum(rate(process_cpu_seconds_total{job=~".*vmanomaly.*"}[5m])) by (job, instance) /
          sum(vmanomaly_cpu_cores_available{job=~".*vmanomaly.*"}[5m]) by (job, instance) > 0.9
        for: 5m
        labels:
          severity: critical
        annotations:
          summary: "More than 90% of CPU is used by \"{{ $labels.job }}\"(\"{{ $labels.instance }}\") during the last 5m"
          description: >
            Too high CPU usage may be a sign of insufficient resources and make process unstable.
            Consider to either increase available CPU resources or decrease the load on the process.

      - alert: TooHighMemoryUsage
        expr: (min_over_time(process_resident_memory_bytes[10m]) / vmanomaly_available_memory_bytes) > 0.85
        for: 5m
        labels:
          severity: critical
        annotations:
          summary: "It is more than 85% of memory used by \"{{ $labels.job }}\"(\"{{ $labels.instance }}\")"
          description: |
            Too high memory usage may result into multiple issues such as OOMs or degraded performance.
            E.g. it can be caused by high churn rate in your input data.
            Consider to either increase available memory or decrease the load on the process.

  - name: vmanomaly-issues
    rules:
      - alert: ServiceErrorsDetected
        expr: sum(increase(vmanomaly_model_run_errors_total{job=~".*vmanomaly.*"}[5m])) by (job, instance, stage) > 0
        for: 5m
        labels:
          severity: critical
        annotations:
          summary: "Model Run Errors in \"{{ $labels.job }}\"(\"{{ $labels.instance }}\") stage: {{ $labels.stage }} during the last 5m"
          description: >
            Errors in the service may indicate a problem with the service itself or its dependencies.
            Investigate the logs for more details.
      - alert: SkippedModelRunsDetected
        expr: sum(increase(vmanomaly_model_runs_skipped_total{job=~".*vmanomaly.*"}[5m])) by (job, instance, stage) > 0
        for: 5m
        labels:
          severity: warning
        annotations:
          summary: "Skipped Model Runs in \"{{ $labels.job }}\"(\"{{ $labels.instance }}\") stage: {{ $labels.stage }} during the last 5m"
          description: >
            Skipped model runs may indicate issues like:
              1. No new or valid data is available for the current run.
              2. The presence of new time series that do not have a trained model yet.
              3. No new (or valid) datapoints produced during inference.
            Investigate the logs for more details.
      - alert: HighReadErrorRate
        expr: >
          (
            sum(increase(vmanomaly_reader_responses_total{job=~".*vmanomaly.*", code=~"2.."}[5m])) by (job, instance, url) /
            sum(increase(vmanomaly_reader_responses_total{job=~".*vmanomaly.*"}[5m])) by (job, instance, url)
          ) < 0.95
        for: 5m
        labels:
          severity: warning
        annotations:
          summary: "High error rate in read requests for \"{{ $labels.job }}\"(\"{{ $labels.instance }}\") for url: {{ $labels.url }} during the last 5m"
          description: >
            Reading errors may indicate issues with the input data source, server-side constraint violations, security or network issues. 
            Investigate the logs for more details.
      - alert: HighWriteErrorRate
        expr: >
          (
            sum(increase(vmanomaly_writer_responses_total{job=~".*vmanomaly.*", code=~"2.."}[5m])) by (job, instance, url) /
            sum(increase(vmanomaly_writer_responses_total{job=~".*vmanomaly.*"}[5m])) by (job, instance, url)
          ) < 0.95
        for: 5m
        labels:
          severity: warning
        annotations:
          summary: "High error rate in write requests for \"{{ $labels.job }}\"(\"{{ $labels.instance }}\") for url: {{ $labels.url }} during the last 5m"
          description: >
            Writing errors may indicate issues with the destination source, server-side constraint violations, security, or network issues. 
            Investigate the logs for more details.