and in [source code](https://github.com/VictoriaMetrics/VictoriaMetrics). Just download VictoriaMetrics and see [how to start it](#how-to-start-victoriametrics).
If you use Ubuntu, then just run `snap install victoriametrics` in order to install and run it.
Then read [Prometheus setup](#prometheus-setup) and [Grafana setup](#grafana-setup) docs.
* VictoriaMetrics supports [Prometheus querying API](https://prometheus.io/docs/prometheus/latest/querying/api/), so it can be used as Prometheus drop-in replacement in Grafana.
* High performance and good scalability for both [inserts](https://medium.com/@valyala/high-cardinality-tsdb-benchmarks-victoriametrics-vs-timescaledb-vs-influxdb-13e6ee64dd6b)
and [selects](https://medium.com/@valyala/when-size-matters-benchmarking-victoriametrics-vs-timescale-and-influxdb-6035811952d4).
[Outperforms InfluxDB and TimescaleDB by up to 20x](https://medium.com/@valyala/measuring-vertical-scalability-for-time-series-databases-in-google-cloud-92550d78d8ae).
* [Uses 10x less RAM than InfluxDB](https://medium.com/@valyala/insert-benchmarks-with-inch-influxdb-vs-victoriametrics-e31a41ae2893)
and [up to 7x less RAM than Prometheus, Thanos or Cortex](https://valyala.medium.com/prometheus-vs-victoriametrics-benchmark-on-node-exporter-metrics-4ca29c75590f)
when dealing with millions of unique time series (aka high cardinality).
* Optimized for time series with high churn rate. Think about [prometheus-operator](https://github.com/coreos/prometheus-operator) metrics from frequent deployments in Kubernetes.
* High data compression, so [up to 70x more data points](https://medium.com/@valyala/when-size-matters-benchmarking-victoriametrics-vs-timescale-and-influxdb-6035811952d4)
may be crammed into limited storage comparing to TimescaleDB
and [up to 7x less storage space is required comparing to Prometheus, Thanos or Cortex](https://valyala.medium.com/prometheus-vs-victoriametrics-benchmark-on-node-exporter-metrics-4ca29c75590f).
* Optimized for storage with high-latency IO and low IOPS (HDD and network storage in AWS, Google Cloud, Microsoft Azure, etc).
See [graphs from these benchmarks](https://medium.com/@valyala/high-cardinality-tsdb-benchmarks-victoriametrics-vs-timescaledb-vs-influxdb-13e6ee64dd6b).
* A single-node VictoriaMetrics may substitute moderately sized clusters built with competing solutions such as Thanos, M3DB, Cortex, InfluxDB or TimescaleDB.
See [vertical scalability benchmarks](https://medium.com/@valyala/measuring-vertical-scalability-for-time-series-databases-in-google-cloud-92550d78d8ae),
[comparing Thanos to VictoriaMetrics cluster](https://medium.com/@valyala/comparing-thanos-to-victoriametrics-cluster-b193bea1683)
and [Remote Write Storage Wars](https://promcon.io/2019-munich/talks/remote-write-storage-wars/) talk
from [PromCon 2019](https://promcon.io/2019-munich/talks/remote-write-storage-wars/).
* VictoriaMetrics consists of a single [small executable](https://medium.com/@valyala/stripping-dependency-bloat-in-victoriametrics-docker-image-983fb5912b0d) without external dependencies.
* All the configuration is done via explicit command-line flags with reasonable defaults.
* Easy and fast backups from [instant snapshots](https://medium.com/@valyala/how-victoriametrics-makes-instant-snapshots-for-multi-terabyte-time-series-data-e1f3fb0e0282)
See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-series-databases-533c1a927883) for more details.
* Storage is protected from corruption on unclean shutdown (i.e. OOM, hardware reset or `kill -9`) thanks to [the storage architecture](https://medium.com/@valyala/how-victoriametrics-makes-instant-snapshots-for-multi-terabyte-time-series-data-e1f3fb0e0282).
* Supports metrics' scraping, ingestion and [backfilling](#backfilling) via the following protocols:
* [Metrics from Prometheus exporters](https://github.com/prometheus/docs/blob/master/content/docs/instrumenting/exposition_formats.md#text-based-format)
such as [node_exporter](https://github.com/prometheus/node_exporter). See [these docs](#how-to-scrape-prometheus-exporters-such-as-node-exporter) for details.
* Ideally works with big amounts of time series data from Kubernetes, IoT sensors, connected cars, industrial telemetry, financial data and various Enterprise workloads.
* Has open source [cluster version](https://github.com/VictoriaMetrics/VictoriaMetrics/tree/cluster).
*`-storageDataPath` - path to data directory. VictoriaMetrics stores all the data in this directory. Default path is `victoria-metrics-data` in the current working directory.
*`-retentionPeriod` - retention for stored data. Older data is automatically deleted. Default retention is 1 month. See [these docs](#retention) for more details.
Other flags have good enough default values, so set them only if you really need this. Pass `-help` to see [all the available flags with description and default values](#list-of-command-line-flags).
* Each `.` char in flag name must be substituted by `_` (for example `-insert.maxQueueDuration <duration>` will translate to `insert_maxQueueDuration=<duration>`)
* For repeating flags an alternative syntax can be used by joining the different values into one using `,` char as separator (for example `-storageNode <nodeA> -storageNode <nodeB>` will translate to `storageNode=<nodeA>,<nodeB>`)
* It is possible setting prefix for environment vars with `-envflag.prefix`. For instance, if `-envflag.prefix=VM_`, then env vars must be prepended with `VM_`
It is recommended upgrading Prometheus to [v2.12.0](https://github.com/prometheus/prometheus/releases) or newer, since previous versions may have issues with `remote_write`.
say otherwise. It is safe skipping multiple versions during the upgrade unless [release notes](https://github.com/VictoriaMetrics/VictoriaMetrics/releases) say otherwise.
It is recommended performing regular upgrades to the latest version, since it may contain important bug fixes, performance optimizations or new features.
VictoriaMetrics can be used as drop-in replacement for Prometheus for scraping targets configured in `prometheus.yml` config file according to [the specification](https://prometheus.io/docs/prometheus/latest/configuration/configuration/#configuration-file).
Just set `-promscrape.config` command-line flag to the path to `prometheus.yml` config - and VictoriaMetrics should start scraping the configured targets.
Currently the following [scrape_config](https://prometheus.io/docs/prometheus/latest/configuration/configuration/#scrape_config) types are supported:
The file pointed by `-promscrape.config` may contain `%{ENV_VAR}` placeholders, which are substituted by the corresponding `ENV_VAR` environment variable values.
Note that Influx line protocol expects [timestamps in *nanoseconds* by default](https://docs.influxdata.com/influxdb/v1.7/write_protocols/line_protocol_tutorial/#timestamp),
while VictoriaMetrics stores them with *milliseconds* precision.
* [Prometheus querying API](#prometheus-querying-api-usage). Graphite metric names may special chars such as `-`, which may clash
with [MetricsQL operations](https://victoriametrics.github.io/MetricsQL.html). Such metrics can be queries via `{__name__="foo-bar.baz"}`.
VictoriaMetrics supports `__graphite__` pseudo-label for selecting time series with Graphite-compatible filters in [MetricsQL](https://victoriametrics.github.io/MetricsQL.html).
For example, `{__graphite__="foo.*.bar"}` is equivalent to `{__name__=~"foo[.][^.]*[.]bar"}`, but it works faster
and it is easier to use when migrating from Graphite to VictoriaMetrics.
* [/api/v1/targets](https://prometheus.io/docs/prometheus/latest/querying/api/#targets) - see [these docs](#how-to-scrape-prometheus-exporters-such-as-node-exporter) for more details.
All the Prometheus querying API handlers can be prepended with `/prometheus` prefix. For example, both `/prometheus/api/v1/query` and `/api/v1/query` should work.
VictoriaMetrics accepts optional `extra_label=<label_name>=<label_value>` query arg, which can be used for enforcing additional label filters for queries. For example,
`/api/v1/query_range?extra_label=user_id=123&query=<query>` would automatically add `{user_id="123"}` label filter to the given `<query>`. This functionality can be used
for limiting the scope of time series visible to the given tenant. It is expected that the `extra_label` query arg is automatically set by auth proxy sitting
in front of VictoriaMetrics. [Contact us](mailto:sales@victoriametrics.com) if you need assistance with such a proxy.
VictoriaMetrics accepts relative times in `time`, `start` and `end` query args additionally to unix timestamps and [RFC3339](https://www.ietf.org/rfc/rfc3339.txt).
VictoriaMetrics accepts `round_digits` query arg for `/api/v1/query` and `/api/v1/query_range` handlers. It can be used for rounding response values to the given number of digits after the decimal point. For example, `/api/v1/query?query=avg_over_time(temperature[1h])&round_digits=2` would round response values to up to two digits after the decimal point.
By default, VictoriaMetrics returns time series for the last 5 minutes from `/api/v1/series`, while the Prometheus API defaults to all time. Use `start` and `end` to select a different time range.
* the handler scans all the inverted index, so it can be slow if the database contains tens of millions of time series;
* the handler may count [deleted time series](#how-to-delete-time-series) additionally to normal time series due to internal implementation restrictions;
The number of returned queries can be limited via `topN` query arg. Old queries can be filtered out with `maxLifetime` query arg.
For example, request to `/api/v1/status/top_queries?topN=5&maxLifetime=30s` would return up to 5 queries per list, which were executed during the last 30 seconds.
VictoriaMetrics supports the following Graphite APIs, which are needed for [Graphite datasource in Grafana](https://grafana.com/docs/grafana/latest/datasources/graphite/):
VictoriaMetrics accepts optional `extra_label=<label_name>=<label_value>` query arg for all the Graphite APIs. This arg can be used for limiting the scope of time series
visible to the given tenant. It is expected that the `extra_label` query arg is automatically set by auth proxy sitting in front of VictoriaMetrics.
[Contact us](mailto:sales@victoriametrics.com) if you need assistance with such a proxy.
VictoriaMetrics supports `__graphite__` pseudo-label for filtering time series with Graphite-compatible filters in [MetricsQL](https://victoriametrics.github.io/MetricsQL.html).
For example, `{__graphite__="foo.*.bar"}` is equivalent to `{__name__=~"foo[.][^.]*[.]bar"}`, but it works faster
and it is easier to use when migrating from Graphite to VictoriaMetrics.
at `/render` endpoint, which is used by [Graphite datasource in Grafana](https://grafana.com/docs/grafana/latest/datasources/graphite/).
It supports `Storage-Step` http request header, which must be set to a step between data points stored in VictoriaMetrics when configuring Graphite datasource in Grafana.
VictoriaMetrics accepts the following additional query args at `/metrics/find` and `/metrics/expand`:
*`label` - for selecting arbitrary label values. By default `label=__name__`, i.e. metric names are selected.
*`delimiter` - for using different delimiters in metric name hierachy. For example, `/metrics/find?delimiter=_&query=node_*` would return all the metric name prefixes
that start with `node_`. By default `delimiter=.`.
More details may be found [here](https://github.com/VictoriaMetrics/VictoriaMetrics/tree/master/deployment/docker#folder-contains-basic-images-and-tools-for-building-and-running-victoria-metrics-in-docker).
VictoriaMetrics can create [instant snapshots](https://medium.com/@valyala/how-victoriametrics-makes-instant-snapshots-for-multi-terabyte-time-series-data-e1f3fb0e0282)
for all the data stored under `-storageDataPath` directory.
Navigate to `http://<victoriametrics-addr>:8428/snapshot/create` in order to create an instant snapshot.
Send a request to `http://<victoriametrics-addr>:8428/api/v1/admin/tsdb/delete_series?match[]=<timeseries_selector_for_delete>`,
where `<timeseries_selector_for_delete>` may contain any [time series selector](https://prometheus.io/docs/prometheus/latest/querying/basics/#time-series-selectors)
for metrics to delete. After that all the time series matching the given selector are deleted. Storage space for
the deleted time series isn't freed instantly - it is freed during subsequent [background merges of data files](https://medium.com/@valyala/how-victoriametrics-makes-instant-snapshots-for-multi-terabyte-time-series-data-e1f3fb0e0282).
It is recommended verifying which metrics will be deleted with the call to `http://<victoria-metrics-addr>:8428/api/v1/series?match[]=<timeseries_selector_for_delete>`
before actually deleting the metrics. By default this query will only scan active series in the past 5 minutes, so you may need to
adjust `start` and `end` to a suitable range to achieve match hits.
in order to keep good performance characteristics when accepting new data. These compactions (merges) are performed independently on per-month partitions.
This means that compactions are stopped for per-month partitions if no new data is ingested into these partitions.
Sometimes it is necessary to trigger compactions for old partitions. For instance, in order to free up disk space occupied by [deleted time series](#how-to-delete-time-series).
In this case forced compaction may be initiated on the specified per-month partition by sending request to `/internal/force_merge?partition_prefix=YYYY_MM`,
where `YYYY_MM` is per-month partition name. For example, `http://victoriametrics:8428/internal/force_merge?partition_prefix=2020_08` would initiate forced
merge for August 2020 partition. The call to `/internal/force_merge` returns immediately, while the corresponding forced merge continues running in background.
Forced merges may require additional CPU, disk IO and storage space resources. It is unnecessary to run forced merge under normal conditions,
since VictoriaMetrics automatically performs [optimal merges in background](https://medium.com/@valyala/how-victoriametrics-makes-instant-snapshots-for-multi-terabyte-time-series-data-e1f3fb0e0282)
Send a request to `http://<victoriametrics-addr>:8428/api/v1/export/native?match[]=<timeseries_selector_for_export>`,
where `<timeseries_selector_for_export>` may contain any [time series selector](https://prometheus.io/docs/prometheus/latest/querying/basics/#time-series-selectors)
for metrics to export. Use `{__name__=~".*"}` selector for fetching all the time series.
On large databases you may experience problems with limit on unique timeseries (default value is 300000). In this case you need to adjust `-search.maxUniqueTimeseries` parameter:
where `<timeseries_selector_for_export>` may contain any [time series selector](https://prometheus.io/docs/prometheus/latest/querying/basics/#time-series-selectors)
for metrics to export. Use `{__name__!=""}` selector for fetching all the time series.
The response would contain all the data for the selected time series in [JSON streaming format](https://en.wikipedia.org/wiki/JSON_streaming#Line-delimited_JSON).
Send a request to `http://<victoriametrics-addr>:8428/api/v1/export/csv?format=<format>&match=<timeseries_selector_for_export>`,
where:
*`<format>` must contain comma-delimited label names for the exported CSV. The following special label names are supported:
*`__name__` - metric name
*`__value__` - sample value
*`__timestamp__:<ts_format>` - sample timestamp. `<ts_format>` can have the following values:
*`unix_s` - unix seconds
*`unix_ms` - unix milliseconds
*`unix_ns` - unix nanoseconds
*`rfc3339` - [RFC3339](https://www.ietf.org/rfc/rfc3339.txt) time
*`custom:<layout>` - custom layout for time that is supported by [time.Format](https://golang.org/pkg/time/#Time.Format) function from Go.
*`<timeseries_selector_for_export>` may contain any [time series selector](https://prometheus.io/docs/prometheus/latest/querying/basics/#time-series-selectors)
for metrics to export.
Optional `start` and `end` args may be added to the request in order to limit the time frame for the exported data. These args may contain either
unix timestamp in seconds or [RFC3339](https://www.ietf.org/rfc/rfc3339.txt) values.
The exported CSV data can be imported to VictoriaMetrics via [/api/v1/import/csv](#how-to-import-csv-data).
* [Prometheus remote_write API](https://prometheus.io/docs/prometheus/latest/configuration/configuration/#remote_write). See [these docs](#prometheus-setup) for details.
*`/api/v1/import/native` for importing data obtained from [/api/v1/export/native](#how-to-export-data-in-native-format).
See [these docs](#how-to-import-data-in-native-format) for details.
*`/api/v1/import/csv` for importing arbitrary CSV data. See [these docs](#how-to-import-csv-data) for details.
*`/api/v1/import/prometheus` for importing data in Prometheus exposition format. See [these docs](#how-to-import-data-in-prometheus-exposition-format) for details.
The specification of VictoriaMetrics' native format may yet change and is not formally documented yet. So currently we do not recommend that external clients attempt to pack their own metrics in native format file.
If you have a native format file obtained via [/api/v1/export/native](#how-to-export-data-in-native-format) however this is the most efficient protocol for importing data in.
Arbitrary CSV data can be imported via `/api/v1/import/csv`. The CSV data is imported according to the provided `format` query arg.
The `format` query arg must contain comma-separated list of parsing rules for CSV fields. Each rule consists of three parts delimited by a colon:
```
<column_pos>:<type>:<context>
```
*`<column_pos>` is the position of the CSV column (field). Column numbering starts from 1. The order of parsing rules may be arbitrary.
*`<type>` describes the column type. Supported types are:
*`metric` - the corresponding CSV column at `<column_pos>` contains metric value, which must be integer or floating-point number.
The metric name is read from the `<context>`. CSV line must have at least a single metric field. Multiple metric fields per CSV line is OK.
*`label` - the corresponding CSV column at `<column_pos>` contains label value. The label name is read from the `<context>`.
CSV line may have arbitrary number of label fields. All these labels are attached to all the configured metrics.
*`time` - the corresponding CSV column at `<column_pos>` contains metric time. CSV line may contain either one or zero columns with time.
If CSV line has no time, then the current time is used. The time is applied to all the configured metrics.
The format of the time is configured via `<context>`. Supported time formats are:
*`unix_s` - unix timestamp in seconds.
*`unix_ms` - unix timestamp in milliseconds.
*`unix_ns` - unix timestamp in nanoseconds. Note that VictoriaMetrics rounds the timestamp to milliseconds.
*`rfc3339` - timestamp in [RFC3339](https://tools.ietf.org/html/rfc3339) format, i.e. `2006-01-02T15:04:05Z`.
*`custom:<layout>` - custom layout for the timestamp. The `<layout>` may contain arbitrary time layout according to [time.Parse rules in Go](https://golang.org/pkg/time/#Parse).
Each request to `/api/v1/import/csv` may contain arbitrary number of CSV lines.
Example for importing CSV data via `/api/v1/import/csv`:
VictoriaMetrics accepts data in [Prometheus exposition format](https://github.com/prometheus/docs/blob/master/content/docs/instrumenting/exposition_formats.md#text-based-format)
Extra labels may be added to all the imported metrics by passing `extra_label=name=value` query args.
For example, `/api/v1/import/prometheus?extra_label=foo=bar` would add `{foo="bar"}` label to all the imported metrics.
If timestamp is missing in `<metric> <value> <timestamp>` Prometheus exposition format line, then the current timestamp is used during data ingestion.
It can be overriden by passing unix timestamp in *milliseconds* via `timestamp` query arg. For example, `/api/v1/import/prometheus?timestamp=1594370496905`.
VictoriaMetrics accepts arbitrary number of lines in a single request to `/api/v1/import/prometheus`, i.e. it supports data streaming.
Note that it could be required to flush response cache after importing historical data. See [these docs](#backfilling) for detail.
VictoriaMetrics also may scrape Prometheus targets - see [these docs](#how-to-scrape-prometheus-exporters-such-as-node-exporter).
*`replace_all`: replaces all the occurences of `regex` in the values of `source_labels` with the `replacement` and stores the result in the `target_label`.
*`labelmap_all`: replaces all the occurences of `regex` in all the label names with the `replacement`.
*`keep_if_equal`: keeps the entry if all label values from `source_labels` are equal.
*`drop_if_equal`: drops the entry if all the label values from `source_labels` are equal.
at `http://<victoriametrics-addr>:8428/federate?match[]=<timeseries_selector_for_federation>`.
Optional `start` and `end` args may be added to the request in order to scrape the last point for each selected time series on the `[start ... end]` interval.
`start` and `end` may contain either unix timestamp in seconds or [RFC3339](https://www.ietf.org/rfc/rfc3339.txt) values. By default, the last point
on the interval `[now - max_lookback ... now]` is scraped for each time series. The default value for `max_lookback` is `5m` (5 minutes), but it can be overridden.
For instance, `/federate?match[]=up&max_lookback=1h` would return last points on the `[now - 1h ... now]` interval. This may be useful for time series federation
VictoriaMetrics stores various caches in RAM. Memory size for these caches may be limited with `-memory.allowedPercent` or `-memory.allowedBytes` flags.
* CPU cores: a CPU core per 300K inserted data points per second. So, ~4 CPU cores are required for processing
the insert stream of 1M data points per second. The ingestion rate may be lower for high cardinality data or for time series with high number of labels.
See [this article](https://medium.com/@valyala/insert-benchmarks-with-inch-influxdb-vs-victoriametrics-e31a41ae2893) for details.
If you see lower numbers per CPU core, then it is likely active time series info doesn't fit caches,
so you need more RAM for lowering CPU usage.
* Storage space: less than a byte per data point on average. So, ~260GB is required for storing a month-long insert stream
of 100K data points per second.
The actual storage size heavily depends on data randomness (entropy). Higher randomness means higher storage size requirements.
on the same time series if they fall within the same discrete 60s bucket. The earliest data point will be kept. In the case of equal timestamps, an arbitrary data point will be kept.
The de-duplication reduces disk space usage if multiple identically configured [vmagent](https://victoriametrics.github.io/vmagent.html) or Prometheus instances in HA pair
write data to the same VictoriaMetrics instance. These vmagent or Prometheus instances must have identical
VictoriaMetrics supports retention smaller than 1 month. For example, `-retentionPeriod=5d` would set data retention for 5 days.
Older data is eventually deleted during [background merge](https://medium.com/@valyala/how-victoriametrics-makes-instant-snapshots-for-multi-terabyte-time-series-data-e1f3fb0e0282).
The same scheme could be implemented for multiple tenants in [VictoriaMetrics cluster](https://victoriametrics.github.io/Cluster-VictoriaMetrics.html).
* VictoriaMetrics has good compression for on-disk data. See [this article](https://medium.com/@valyala/victoriametrics-achieving-better-compression-for-time-series-data-than-gorilla-317bc1f95932)
Single-node VictoriaMetrics doesn't support multi-tenancy. Use [cluster version](https://github.com/VictoriaMetrics/VictoriaMetrics/tree/cluster) instead.
Though single-node VictoriaMetrics cannot scale to multiple nodes, it is optimized for resource usage - storage size / bandwidth / IOPS, RAM, CPU.
This means that a single-node VictoriaMetrics may scale vertically and substitute a moderately sized cluster built with competing solutions
such as Thanos, Uber M3, InfluxDB or TimescaleDB. See [vertical scalability benchmarks](https://medium.com/@valyala/measuring-vertical-scalability-for-time-series-databases-in-google-cloud-92550d78d8ae).
So try single-node VictoriaMetrics at first and then [switch to cluster version](https://github.com/VictoriaMetrics/VictoriaMetrics/tree/cluster) if you still need
horizontally scalable long-term remote storage for really large Prometheus deployments.
[Contact us](mailto:info@victoriametrics.com) for paid support.
Additionally, alerting can be set up with the following tools:
* With Prometheus - see [the corresponding docs](https://prometheus.io/docs/alerting/overview/).
* With Promxy - see [the corresponding docs](https://github.com/jacksontj/promxy/blob/master/README.md#how-do-i-use-alertingrecording-rules-in-promxy).
* With Grafana - see [the corresponding docs](https://grafana.com/docs/alerting/rules/).
The only option is increasing the limit on [the number of open files in the OS](https://medium.com/@muhammadtriwibowo/set-permanently-ulimit-n-open-files-in-ubuntu-4d61064429a),
so Prometheus instances could establish more connections to VictoriaMetrics.
* The recommended filesystem is `ext4`, the recommended persistent storage is [persistent HDD-based disk on GCP](https://cloud.google.com/compute/docs/disks/#pdspecs),
since it is protected from hardware failures via internal replication and it can be [resized on the fly](https://cloud.google.com/compute/docs/disks/add-persistent-disk#resize_pd).
There are officials Grafana dashboards for [single-node VictoriaMetrics](https://grafana.com/dashboards/10229) and [clustered VictoriaMetrics](https://grafana.com/grafana/dashboards/11176).
See the example of alerting rules for VM components [here](https://github.com/VictoriaMetrics/VictoriaMetrics/blob/master/deployment/docker/alerts.yml).
* It is recommended to have at least 50% of spare resources for CPU, disk IO and RAM, so VictoriaMetrics could handle short spikes in the workload without performance issues.
* VictoriaMetrics requires free disk space for [merging data files to bigger ones](https://medium.com/@valyala/how-victoriametrics-makes-instant-snapshots-for-multi-terabyte-time-series-data-e1f3fb0e0282).
It may slow down when there is no enough free space left. So make sure `-storageDataPath` directory
has at least 20% of free space. The remaining amount of free space
can be [monitored](#monitoring) via `vm_free_disk_space_bytes` metric. The total size of data
stored on the disk can be monitored via sum of `vm_data_size_bytes` metrics.
See also `vm_merge_need_free_disk_space` metrics, which are set to values higher than 0
if background merge cannot be initiated due to free disk space shortage. The value shows the number of per-month partitions,
which would start background merge if they had more free disk space.
Storage-level replication may be offloaded to durable persistent storage such as [Google Cloud disks](https://cloud.google.com/compute/docs/disks#pdspecs).
We also provide `vmbackupmanager` tool for paid enterprise subscribers - see [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/466) for details.
* [Prometheus Oauth proxy](https://gitlab.com/optima_public/prometheus_oauth_proxy) - see [this article](https://medium.com/@richard.holly/powerful-saas-solution-for-detection-metrics-c67b9208d362) for details.
Pass `-help` to VictoriaMetrics in order to see the list of supported command-line flags with their description:
```
-bigMergeConcurrency int
The maximum number of CPU cores to use for big merges. Default value is used if set to 0
-csvTrimTimestamp duration
Trim timestamps when importing csv data to this duration. Minimum practical duration is 1ms. Higher duration (i.e. 1s) may be used for reducing disk space usage for timestamp data (default 1ms)
-dedup.minScrapeInterval duration
Remove superflouos samples from time series if they are located closer to each other than this duration. This may be useful for reducing overhead when multiple identically configured Prometheus instances write data to the same VictoriaMetrics. Deduplication is disabled if the -dedup.minScrapeInterval is 0
-deleteAuthKey string
authKey for metrics' deletion via /api/v1/admin/tsdb/delete_series and /tags/delSeries
-denyQueriesOutsideRetention
Whether to deny queries outside of the configured -retentionPeriod. When set, then /api/v1/query_range would return '503 Service Unavailable' error for queries with 'from' value outside -retentionPeriod. This may be useful when multiple data sources with distinct retentions are hidden behind query-tee
-dryRun
Whether to check only -promscrape.config and then exit. Unknown config entries are allowed in -promscrape.config by default. This can be changed with -promscrape.config.strictParse
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set
-envflag.prefix string
Prefix for environment variables if -envflag.enable is set
-finalMergeDelay duration
The delay before starting final merge for per-month partition after no new data is ingested into it. Final merge may require additional disk IO and CPU resources. Final merge may increase query speed and reduce disk space usage in some cases. Zero value disables final merge
-forceFlushAuthKey string
authKey, which must be passed in query string to /internal/force_flush pages
-forceMergeAuthKey string
authKey, which must be passed in query string to /internal/force_merge pages
-fs.disableMmap
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
-graphiteListenAddr string
TCP and UDP address to listen for Graphite plaintext data. Usually :2003 must be set. Doesn't work if empty
-graphiteTrimTimestamp duration
Trim timestamps for Graphite data to this duration. Minimum practical duration is 1s. Higher duration (i.e. 1m) may be used for reducing disk space usage for timestamp data (default 1s)
-http.connTimeout duration
Incoming http connections are closed after the configured timeout. This may help spreading incoming load among a cluster of services behind load balancer. Note that the real timeout may be bigger by up to 10% as a protection from Thundering herd problem (default 2m0s)
-http.disableResponseCompression
Disable compression of HTTP responses for saving CPU resources. By default compression is enabled to save network bandwidth
-http.idleConnTimeout duration
Timeout for incoming idle http connections (default 1m0s)
-http.maxGracefulShutdownDuration duration
The maximum duration for graceful shutdown of HTTP server. Highly loaded server may require increased value for graceful shutdown (default 7s)
-http.pathPrefix string
An optional prefix to add to all the paths handled by http server. For example, if '-http.pathPrefix=/foo/bar' is set, then all the http requests will be handled on '/foo/bar/*' paths. This may be useful for proxied requests. See https://www.robustperception.io/using-external-urls-and-proxies-with-prometheus
-http.shutdownDelay duration
Optional delay before http server shutdown. During this dealy the servier returns non-OK responses from /health page, so load balancers can route new requests to other servers
-httpAuth.password string
Password for HTTP Basic Auth. The authentication is disabled if -httpAuth.username is empty
-httpAuth.username string
Username for HTTP Basic Auth. The authentication is disabled if empty. See also -httpAuth.password
-httpListenAddr string
TCP address to listen for http connections (default ":8428")
-import.maxLineLen size
The maximum length in bytes of a single line accepted by /api/v1/import; the line length can be limited with 'max_rows_per_line' query arg passed to /api/v1/export
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 104857600)
-influx.databaseNames array
Comma-separated list of database names to return from /query and /influx/query API. This can be needed for accepting data from Telegraf plugins such as https://github.com/fangli/fluent-plugin-influxdb
Supports array of values separated by comma or specified via multiple flags.
-influx.maxLineSize size
The maximum size in bytes for a single Influx line during parsing
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 262144)
-influxListenAddr string
TCP and UDP address to listen for Influx line protocol data. Usually :8189 must be set. Doesn't work if empty. This flag isn't needed when ingesting data over HTTP - just send it to http://<victoriametrics>:8428/write
-influxMeasurementFieldSeparator string
Separator for '{measurement}{separator}{field_name}' metric name when inserted via Influx line protocol (default "_")
-influxSkipMeasurement
Uses '{field_name}' as a metric name while ignoring '{measurement}' and '-influxMeasurementFieldSeparator'
-influxSkipSingleField
Uses '{measurement}' instead of '{measurement}{separator}{field_name}' for metic name if Influx line contains only a single field
-influxTrimTimestamp duration
Trim timestamps for Influx line protocol data to this duration. Minimum practical duration is 1ms. Higher duration (i.e. 1s) may be used for reducing disk space usage for timestamp data (default 1ms)
-insert.maxQueueDuration duration
The maximum duration for waiting in the queue for insert requests due to -maxConcurrentInserts (default 1m0s)
Whether to log new series. This option is for debug purposes only. It can lead to performance issues when big number of new series are ingested into VictoriaMetrics
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
-loggerFormat string
Format for logs. Possible values: default, json (default "default")
-loggerLevel string
Minimum level of errors to log. Possible values: INFO, WARN, ERROR, FATAL, PANIC (default "INFO")
-loggerOutput string
Output for the logs. Supported values: stderr, stdout (default "stderr")
-loggerTimezone string
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
-loggerWarnsPerSecondLimit int
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
-maxConcurrentInserts int
The maximum number of concurrent inserts. Default value should work for most cases, since it minimizes the overhead for concurrent inserts. This option is tigthly coupled with -insert.maxQueueDuration (default 16)
-maxInsertRequestSize size
The maximum size in bytes of a single Prometheus remote_write API request
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 33554432)
-maxLabelsPerTimeseries int
The maximum number of labels accepted per time series. Superfluous labels are dropped (default 30)
-memory.allowedBytes size
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to non-zero value. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
-memory.allowedPercent float
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage (default 60)
-metricsAuthKey string
Auth key for /metrics. It overrides httpAuth settings
-opentsdbHTTPListenAddr string
TCP address to listen for OpentTSDB HTTP put requests. Usually :4242 must be set. Doesn't work if empty
-opentsdbListenAddr string
TCP and UDP address to listen for OpentTSDB metrics. Telnet put messages and HTTP /api/put messages are simultaneously served on TCP port. Usually :4242 must be set. Doesn't work if empty
-opentsdbTrimTimestamp duration
Trim timestamps for OpenTSDB 'telnet put' data to this duration. Minimum practical duration is 1s. Higher duration (i.e. 1m) may be used for reducing disk space usage for timestamp data (default 1s)
-opentsdbhttp.maxInsertRequestSize size
The maximum size of OpenTSDB HTTP put request
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 33554432)
-opentsdbhttpTrimTimestamp duration
Trim timestamps for OpenTSDB HTTP data to this duration. Minimum practical duration is 1ms. Higher duration (i.e. 1s) may be used for reducing disk space usage for timestamp data (default 1ms)
-pprofAuthKey string
Auth key for /debug/pprof. It overrides httpAuth settings
-precisionBits int
The number of precision bits to store per each value. Lower precision bits improves data compression at the cost of precision loss (default 64)
-promscrape.cluster.memberNum int
The number of number in the cluster of scrapers. It must be an unique value in the range 0 ... promscrape.cluster.membersCount-1 across scrapers in the cluster
-promscrape.cluster.membersCount int
The number of members in a cluster of scrapers. Each member must have an unique -promscrape.cluster.memberNum in the range 0 ... promscrape.cluster.membersCount-1 . Each member then scrapes roughly 1/N of all the targets. By default cluster scraping is disabled, i.e. a single scraper scrapes all the targets
-promscrape.cluster.replicationFactor int
The number of members in the cluster, which scrape the same targets. If the replication factor is greater than 2, then the deduplication must be enabled at remote storage side. See https://victoriametrics.github.io/#deduplication (default 1)
-promscrape.config string
Optional path to Prometheus config file with 'scrape_configs' section containing targets to scrape. See https://victoriametrics.github.io/#how-to-scrape-prometheus-exporters-such-as-node-exporter for details
-promscrape.config.dryRun
Checks -promscrape.config file for errors and unsupported fields and then exits. Returns non-zero exit code on parsing errors and emits these errors to stderr. See also -promscrape.config.strictParse command-line flag. Pass -loggerLevel=ERROR if you don't need to see info messages in the output.
-promscrape.config.strictParse
Whether to allow only supported fields in -promscrape.config . By default unsupported fields are silently skipped
-promscrape.configCheckInterval duration
Interval for checking for changes in '-promscrape.config' file. By default the checking is disabled. Send SIGHUP signal in order to force config check for changes
-promscrape.consulSDCheckInterval duration
Interval for checking for changes in Consul. This works only if consul_sd_configs is configured in '-promscrape.config' file. See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#consul_sd_config for details (default 30s)
-promscrape.disableCompression
Whether to disable sending 'Accept-Encoding: gzip' request headers to all the scrape targets. This may reduce CPU usage on scrape targets at the cost of higher network bandwidth utilization. It is possible to set 'disable_compression: true' individually per each 'scrape_config' section in '-promscrape.config' for fine grained control
-promscrape.disableKeepAlive
Whether to disable HTTP keep-alive connections when scraping all the targets. This may be useful when targets has no support for HTTP keep-alive connection. It is possible to set 'disable_keepalive: true' individually per each 'scrape_config' section in '-promscrape.config' for fine grained control. Note that disabling HTTP keep-alive may increase load on both vmagent and scrape targets
-promscrape.discovery.concurrency int
The maximum number of concurrent requests to Prometheus autodiscovery API (Consul, Kubernetes, etc.) (default 100)
-promscrape.discovery.concurrentWaitTime duration
The maximum duration for waiting to perform API requests if more than -promscrape.discovery.concurrency requests are simultaneously performed (default 1m0s)
-promscrape.dnsSDCheckInterval duration
Interval for checking for changes in dns. This works only if dns_sd_configs is configured in '-promscrape.config' file. See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#dns_sd_config for details (default 30s)
-promscrape.dockerswarmSDCheckInterval duration
Interval for checking for changes in dockerswarm. This works only if dockerswarm_sd_configs is configured in '-promscrape.config' file. See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#dockerswarm_sd_config for details (default 30s)
-promscrape.dropOriginalLabels
Whether to drop original labels for scrape targets at /targets and /api/v1/targets pages. This may be needed for reducing memory usage when original labels for big number of scrape targets occupy big amounts of memory. Note that this reduces debuggability for improper per-target relabeling configs
-promscrape.ec2SDCheckInterval duration
Interval for checking for changes in ec2. This works only if ec2_sd_configs is configured in '-promscrape.config' file. See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#ec2_sd_config for details (default 1m0s)
-promscrape.eurekaSDCheckInterval duration
Interval for checking for changes in eureka. This works only if eureka_sd_configs is configured in '-promscrape.config' file. See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#eureka_sd_config for details (default 30s)
-promscrape.fileSDCheckInterval duration
Interval for checking for changes in 'file_sd_config'. See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#file_sd_config for details (default 30s)
-promscrape.gceSDCheckInterval duration
Interval for checking for changes in gce. This works only if gce_sd_configs is configured in '-promscrape.config' file. See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#gce_sd_config for details (default 1m0s)
-promscrape.kubernetes.apiServerTimeout duration
How frequently to reload the full state from Kuberntes API server (default 30m0s)
-promscrape.kubernetesSDCheckInterval duration
Interval for checking for changes in Kubernetes API server. This works only if kubernetes_sd_configs is configured in '-promscrape.config' file. See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#kubernetes_sd_config for details (default 30s)
The maximum number of droppedTargets to show at /api/v1/targets page. Increase this value if your setup drops more scrape targets during relabeling and you need investigating labels for all the dropped targets. Note that the increased number of tracked dropped targets may result in increased memory usage (default 1000)
The maximum size of scrape response in bytes to process from Prometheus targets. Bigger responses are rejected
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 16777216)
-promscrape.openstackSDCheckInterval duration
Interval for checking for changes in openstack API server. This works only if openstack_sd_configs is configured in '-promscrape.config' file. See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#openstack_sd_config for details (default 30s)
-promscrape.streamParse
Whether to enable stream parsing for metrics obtained from scrape targets. This may be useful for reducing memory usage when millions of metrics are exposed per each scrape target. It is posible to set 'stream_parse: true' individually per each 'scrape_config' section in '-promscrape.config' for fine grained control
-promscrape.suppressDuplicateScrapeTargetErrors
Whether to suppress 'duplicate scrape target' errors; see https://victoriametrics.github.io/vmagent.html#troubleshooting for details
-promscrape.suppressScrapeErrors
Whether to suppress scrape errors logging. The last error for each target is always available at '/targets' page even if scrape errors logging is suppressed
-relabelConfig string
Optional path to a file with relabeling rules, which are applied to all the ingested metrics. See https://victoriametrics.github.io/#relabeling for details
-retentionPeriod value
Data with timestamps outside the retentionPeriod is automatically deleted
The following optional suffixes are supported: h (hour), d (day), w (week), y (year). If suffix isn't set, then the duration is counted in months (default 1)
-search.cacheTimestampOffset duration
The maximum duration since the current time for response data, which is always queried from the original raw data, without using the response cache. Increase this value if you see gaps in responses due to time synchronization issues between VictoriaMetrics and data sources (default 5m0s)
-search.disableCache
Whether to disable response caching. This may be useful during data backfilling
-search.latencyOffset duration
The time when data points become visible in query results after the collection. Too small value can result in incomplete last points for query results (default 30s)
-search.logSlowQueryDuration duration
Log queries with execution time exceeding this value. Zero disables slow query logging (default 5s)
-search.maxConcurrentRequests int
The maximum number of concurrent search requests. It shouldn't be high, since a single request can saturate all the CPU cores. See also -search.maxQueueDuration (default 8)
-search.maxExportDuration duration
The maximum duration for /api/v1/export call (default 720h0m0s)
-search.maxLookback duration
Synonim to -search.lookback-delta from Prometheus. The value is dynamically detected from interval between time series datapoints if not set. It can be overridden on per-query basis via max_lookback arg. See also '-search.maxStalenessInterval' flag, which has the same meaining due to historical reasons
The maximum points per a single timeseries returned from /api/v1/query_range. This option doesn't limit the number of scanned raw samples in the database. The main purpose of this option is to limit the number of per-series points returned to graphing UI such as Grafana. There is no sense in setting this limit to values bigger than the horizontal resolution of the graph (default 30000)
The maximum duration for query execution (default 30s)
-search.maxQueryLen size
The maximum search query length in bytes
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 16384)
-search.maxQueueDuration duration
The maximum time the request waits for execution when -search.maxConcurrentRequests limit is reached; see also -search.maxQueryDuration (default 10s)
-search.maxStalenessInterval duration
The maximum interval for staleness calculations. By default it is automatically calculated from the median interval between samples. This flag could be useful for tuning Prometheus data model closer to Influx-style data model. See https://prometheus.io/docs/prometheus/latest/querying/basics/#staleness for details. See also '-search.maxLookback' flag, which has the same meaning due to historical reasons
-search.maxStepForPointsAdjustment duration
The maximum step when /api/v1/query_range handler adjusts points with timestamps closer than -search.latencyOffset to the current time. The adjustment is needed because such points may contain incomplete data (default 1m0s)
-search.maxTagKeys int
The maximum number of tag keys returned from /api/v1/labels (default 100000)
-search.maxTagValueSuffixesPerSearch int
The maximum number of tag value suffixes returned from /metrics/find (default 100000)
-search.maxTagValues int
The maximum number of tag values returned from /api/v1/label/<label_name>/values (default 100000)
-search.maxUniqueTimeseries int
The maximum number of unique time series each search can scan (default 300000)
-search.minStalenessInterval duration
The minimum interval for staleness calculations. This flag could be useful for removing gaps on graphs generated from time series with irregular intervals between samples. See also '-search.maxStalenessInterval'
-search.queryStats.lastQueriesCount int
Query stats for /api/v1/status/top_queries is tracked on this number of last queries. Zero value disables query stats tracking (default 20000)
The minimum duration for queries to track in query stats at /api/v1/status/top_queries. Queries with lower duration are ignored in query stats
-search.resetCacheAuthKey string
Optional authKey for resetting rollup cache via /internal/resetRollupResultCache call
-search.treatDotsAsIsInRegexps
Whether to treat dots as is in regexp label filters used in queries. For example, foo{bar=~"a.b.c"} will be automatically converted to foo{bar=~"a\\.b\\.c"}, i.e. all the dots in regexp filters will be automatically escaped in order to match only dot char instead of matching any char. Dots in ".+", ".*" and ".{n}" regexps aren't escaped. This option is DEPRECATED in favor of {__graphite__="a.*.c"} syntax for selecting metrics matching the given Graphite metrics filter
-selfScrapeInstance string
Value for 'instance' label, which is added to self-scraped metrics (default "self")
-selfScrapeInterval duration
Interval for self-scraping own metrics at /metrics page
-selfScrapeJob string
Value for 'job' label, which is added to self-scraped metrics (default "victoria-metrics")
-smallMergeConcurrency int
The maximum number of CPU cores to use for small merges. Default value is used if set to 0
-snapshotAuthKey string
authKey, which must be passed in query string to /snapshot* pages
-storageDataPath string
Path to storage data (default "victoria-metrics-data")
-tls
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
-tlsCertFile string
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs, since RSA certs are slow
-tlsKeyFile string
Path to file with TLS key. Used only if -tls is set
