VictoriaMetrics/app/vmalert/rule/group_test.go

818 lines
21 KiB
Go
Raw Normal View History

package rule
import (
"context"
"fmt"
"math"
"os"
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
"reflect"
"sort"
"testing"
"time"
"gopkg.in/yaml.v2"
"github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/config"
"github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/datasource"
"github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/notifier"
"github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/remotewrite"
"github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/templates"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/decimal"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/prompbmarshal"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promutils"
)
func init() {
// Disable rand sleep on group start during tests in order to speed up test execution.
// Rand sleep is needed only in prod code.
SkipRandSleepOnGroupStart = true
}
func TestMain(m *testing.M) {
if err := templates.Load([]string{}, true); err != nil {
fmt.Println("failed to load template for test")
os.Exit(1)
}
os.Exit(m.Run())
}
func TestUpdateWith(t *testing.T) {
f := func(currentRules, newRules []config.Rule) {
t.Helper()
g := &Group{
Name: "test",
}
qb := &datasource.FakeQuerier{}
for _, r := range currentRules {
r.ID = config.HashRule(r)
g.Rules = append(g.Rules, g.newRule(qb, r))
}
ng := &Group{
Name: "test",
}
for _, r := range newRules {
r.ID = config.HashRule(r)
ng.Rules = append(ng.Rules, ng.newRule(qb, r))
}
err := g.updateWith(ng)
if err != nil {
t.Fatalf("cannot update rule: %s", err)
}
if len(g.Rules) != len(newRules) {
t.Fatalf("expected to have %d rules; got: %d", len(g.Rules), len(newRules))
}
sort.Slice(g.Rules, func(i, j int) bool {
return g.Rules[i].ID() < g.Rules[j].ID()
})
sort.Slice(ng.Rules, func(i, j int) bool {
return ng.Rules[i].ID() < ng.Rules[j].ID()
})
for i, r := range g.Rules {
got, want := r, ng.Rules[i]
if got.ID() != want.ID() {
t.Fatalf("expected to have rule %q; got %q", want, got)
}
if err := CompareRules(t, got, want); err != nil {
t.Fatalf("comparison error: %s", err)
}
}
}
// new rule
f(nil, []config.Rule{
{Alert: "bar"},
})
// update alerting rule
f([]config.Rule{
{
Alert: "foo",
Expr: "up > 0",
For: promutils.NewDuration(time.Second),
Labels: map[string]string{
"bar": "baz",
},
Annotations: map[string]string{
"summary": "{{ $value|humanize }}",
"description": "{{$labels}}",
},
},
{
Alert: "bar",
Expr: "up > 0",
For: promutils.NewDuration(time.Second),
Labels: map[string]string{
"bar": "baz",
},
},
}, []config.Rule{
{
Alert: "foo",
Expr: "up > 10",
For: promutils.NewDuration(time.Second),
Labels: map[string]string{
"baz": "bar",
},
Annotations: map[string]string{
"summary": "none",
},
},
{
Alert: "bar",
Expr: "up > 0",
For: promutils.NewDuration(2 * time.Second),
KeepFiringFor: promutils.NewDuration(time.Minute),
Labels: map[string]string{
"bar": "baz",
},
},
})
// update recording rule
f([]config.Rule{{
Record: "foo",
Expr: "max(up)",
Labels: map[string]string{
"bar": "baz",
},
}}, []config.Rule{{
Record: "foo",
Expr: "min(up)",
Labels: map[string]string{
"baz": "bar",
},
}})
// empty rule
f([]config.Rule{{Alert: "foo"}, {Record: "bar"}}, nil)
// multiple rules
f([]config.Rule{
{Alert: "bar"},
{Alert: "baz"},
{Alert: "foo"},
}, []config.Rule{
{Alert: "baz"},
{Record: "foo"},
})
// replace rule
f([]config.Rule{{Alert: "foo1"}}, []config.Rule{{Alert: "foo2"}})
// replace multiple rules
f([]config.Rule{
{Alert: "foo1"},
{Record: "foo2"},
{Alert: "foo3"},
}, []config.Rule{
{Alert: "foo3"},
{Alert: "foo4"},
{Record: "foo5"},
})
}
func TestUpdateDuringRandSleep(t *testing.T) {
// enable rand sleep to test group update during sleep
SkipRandSleepOnGroupStart = false
defer func() {
SkipRandSleepOnGroupStart = true
}()
rule := AlertingRule{
Name: "jobDown",
Expr: "up==0",
Labels: map[string]string{
"foo": "bar",
},
}
g := &Group{
Name: "test",
Rules: []Rule{
&rule,
},
// big interval ensures big enough randSleep during start process
Interval: 100 * time.Hour,
updateCh: make(chan *Group),
}
go g.Start(context.Background(), nil, nil, nil)
rule1 := AlertingRule{
Name: "jobDown",
Expr: "up{job=\"vmagent\"}==0",
Labels: map[string]string{
"foo": "bar",
},
}
g1 := &Group{
Rules: []Rule{
&rule1,
},
}
g.updateCh <- g1
time.Sleep(10 * time.Millisecond)
g.mu.RLock()
if g.Rules[0].(*AlertingRule).Expr != "up{job=\"vmagent\"}==0" {
t.Fatalf("expected to have updated rule expr")
}
g.mu.RUnlock()
rule2 := AlertingRule{
Name: "jobDown",
Expr: "up{job=\"vmagent\"}==0",
Labels: map[string]string{
"foo": "bar",
"baz": "qux",
},
}
g2 := &Group{
Rules: []Rule{
&rule2,
},
}
g.updateCh <- g2
time.Sleep(10 * time.Millisecond)
g.mu.RLock()
if len(g.Rules[0].(*AlertingRule).Labels) != 2 {
t.Fatalf("expected to have updated labels")
}
g.mu.RUnlock()
g.Close()
}
func TestGroupStart(t *testing.T) {
const (
rules = `
- name: groupTest
rules:
- alert: VMRows
for: 1ms
expr: vm_rows > 0
labels:
label: bar
host: "{{ $labels.instance }}"
annotations:
summary: "{{ $value }}"
`
)
var groups []config.Group
err := yaml.Unmarshal([]byte(rules), &groups)
if err != nil {
t.Fatalf("failed to parse rules: %s", err)
}
fs := &datasource.FakeQuerier{}
fn := &notifier.FakeNotifier{}
const evalInterval = time.Millisecond
g := NewGroup(groups[0], fs, evalInterval, map[string]string{"cluster": "east-1"})
const inst1, inst2, job = "foo", "bar", "baz"
m1 := metricWithLabels(t, "instance", inst1, "job", job)
m2 := metricWithLabels(t, "instance", inst2, "job", job)
r := g.Rules[0].(*AlertingRule)
alert1 := r.newAlert(m1, time.Now(), nil, nil)
alert1.State = notifier.StateFiring
// add annotations
alert1.Annotations["summary"] = "1"
// add external label
alert1.Labels["cluster"] = "east-1"
// add labels from response
alert1.Labels["job"] = job
alert1.Labels["instance"] = inst1
// add rule labels
alert1.Labels["label"] = "bar"
alert1.Labels["host"] = inst1
// add service labels
alert1.Labels[alertNameLabel] = alert1.Name
alert1.Labels[alertGroupNameLabel] = g.Name
alert1.ID = hash(alert1.Labels)
alert2 := r.newAlert(m2, time.Now(), nil, nil)
alert2.State = notifier.StateFiring
// add annotations
alert2.Annotations["summary"] = "1"
// add external label
alert2.Labels["cluster"] = "east-1"
// add labels from response
alert2.Labels["job"] = job
alert2.Labels["instance"] = inst2
// add rule labels
alert2.Labels["label"] = "bar"
alert2.Labels["host"] = inst2
// add service labels
alert2.Labels[alertNameLabel] = alert2.Name
alert2.Labels[alertGroupNameLabel] = g.Name
alert2.ID = hash(alert2.Labels)
finished := make(chan struct{})
fs.Add(m1)
fs.Add(m2)
go func() {
g.Start(context.Background(), func() []notifier.Notifier { return []notifier.Notifier{fn} }, nil, fs)
close(finished)
}()
waitForIterations := func(n int, interval time.Duration) {
t.Helper()
var cur uint64
prev := g.metrics.iterationTotal.Get()
for i := 0; ; i++ {
if i > 40 {
t.Fatalf("group wasn't able to perform %d evaluations during %d eval intervals", n, i)
}
cur = g.metrics.iterationTotal.Get()
if int(cur-prev) >= n {
return
}
time.Sleep(interval)
}
}
// wait for multiple evaluation iterations
waitForIterations(4, evalInterval)
gotAlerts := fn.GetAlerts()
expectedAlerts := []notifier.Alert{*alert1, *alert2}
compareAlerts(t, expectedAlerts, gotAlerts)
gotAlertsNum := fn.GetCounter()
if gotAlertsNum < len(expectedAlerts)*2 {
t.Fatalf("expected to receive at least %d alerts; got %d instead",
len(expectedAlerts)*2, gotAlertsNum)
}
// reset previous data
fs.Reset()
// and set only one datapoint for response
fs.Add(m1)
// wait for multiple evaluation iterations
waitForIterations(4, evalInterval)
gotAlerts = fn.GetAlerts()
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
alert2.State = notifier.StateInactive
expectedAlerts = []notifier.Alert{*alert1, *alert2}
compareAlerts(t, expectedAlerts, gotAlerts)
g.Close()
<-finished
}
func TestGetResolveDuration(t *testing.T) {
f := func(groupInterval, maxDuration, resendDelay, resultExpected time.Duration) {
t.Helper()
result := getResolveDuration(groupInterval, resendDelay, maxDuration)
if result != resultExpected {
t.Fatalf("unexpected result; got %s; want %s", result, resultExpected)
}
}
f(0, 0, 0, 0)
f(time.Minute, 0, 0, 4*time.Minute)
f(time.Minute, 0, 2*time.Minute, 8*time.Minute)
f(time.Minute, 4*time.Minute, 4*time.Minute, 4*time.Minute)
f(2*time.Minute, time.Minute, 2*time.Minute, time.Minute)
f(time.Minute, 2*time.Minute, 1*time.Minute, 2*time.Minute)
f(2*time.Minute, 0, 1*time.Minute, 8*time.Minute)
}
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
func TestGetStaleSeries(t *testing.T) {
ts := time.Now()
e := &executor{
previouslySentSeriesToRW: make(map[uint64]map[string][]prompbmarshal.Label),
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
}
f := func(r Rule, labels, expLabels [][]prompbmarshal.Label) {
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
t.Helper()
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
var tss []prompbmarshal.TimeSeries
for _, l := range labels {
tss = append(tss, newTimeSeriesPB([]float64{1}, []int64{ts.Unix()}, l))
}
staleS := e.getStaleSeries(r, tss, ts)
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
if staleS == nil && expLabels == nil {
return
}
if len(staleS) != len(expLabels) {
t.Fatalf("expected to get %d stale series, got %d",
len(expLabels), len(staleS))
}
for i, exp := range expLabels {
got := staleS[i]
if !reflect.DeepEqual(exp, got.Labels) {
t.Fatalf("expected to get labels: \n%v;\ngot instead: \n%v",
exp, got.Labels)
}
if len(got.Samples) != 1 {
t.Fatalf("expected to have 1 sample; got %d", len(got.Samples))
}
if !decimal.IsStaleNaN(got.Samples[0].Value) {
t.Fatalf("expected sample value to be %v; got %v", decimal.StaleNaN, got.Samples[0].Value)
}
}
}
// warn: keep in mind, that executor holds the state, so sequence of f calls matters
// single series
f(&AlertingRule{RuleID: 1},
[][]prompbmarshal.Label{toPromLabels(t, "__name__", "job:foo", "job", "foo")},
nil)
f(&AlertingRule{RuleID: 1},
[][]prompbmarshal.Label{toPromLabels(t, "__name__", "job:foo", "job", "foo")},
nil)
f(&AlertingRule{RuleID: 1},
nil,
[][]prompbmarshal.Label{toPromLabels(t, "__name__", "job:foo", "job", "foo")})
f(&AlertingRule{RuleID: 1},
nil,
nil)
// multiple series
f(&AlertingRule{RuleID: 1},
[][]prompbmarshal.Label{
toPromLabels(t, "__name__", "job:foo", "job", "foo"),
toPromLabels(t, "__name__", "job:foo", "job", "bar"),
},
nil)
f(&AlertingRule{RuleID: 1},
[][]prompbmarshal.Label{toPromLabels(t, "__name__", "job:foo", "job", "bar")},
[][]prompbmarshal.Label{toPromLabels(t, "__name__", "job:foo", "job", "foo")})
f(&AlertingRule{RuleID: 1},
[][]prompbmarshal.Label{toPromLabels(t, "__name__", "job:foo", "job", "bar")},
nil)
f(&AlertingRule{RuleID: 1},
nil,
[][]prompbmarshal.Label{toPromLabels(t, "__name__", "job:foo", "job", "bar")})
// multiple rules and series
f(&AlertingRule{RuleID: 1},
[][]prompbmarshal.Label{
toPromLabels(t, "__name__", "job:foo", "job", "foo"),
toPromLabels(t, "__name__", "job:foo", "job", "bar"),
},
nil)
f(&AlertingRule{RuleID: 2},
[][]prompbmarshal.Label{
toPromLabels(t, "__name__", "job:foo", "job", "foo"),
toPromLabels(t, "__name__", "job:foo", "job", "bar"),
},
nil)
f(&AlertingRule{RuleID: 1},
[][]prompbmarshal.Label{toPromLabels(t, "__name__", "job:foo", "job", "bar")},
[][]prompbmarshal.Label{toPromLabels(t, "__name__", "job:foo", "job", "foo")})
f(&AlertingRule{RuleID: 1},
[][]prompbmarshal.Label{toPromLabels(t, "__name__", "job:foo", "job", "bar")},
nil)
}
func TestPurgeStaleSeries(t *testing.T) {
ts := time.Now()
labels := toPromLabels(t, "__name__", "job:foo", "job", "foo")
tss := []prompbmarshal.TimeSeries{newTimeSeriesPB([]float64{1}, []int64{ts.Unix()}, labels)}
f := func(curRules, newRules, expStaleRules []Rule) {
t.Helper()
e := &executor{
previouslySentSeriesToRW: make(map[uint64]map[string][]prompbmarshal.Label),
}
// seed executor with series for
// current rules
for _, rule := range curRules {
e.getStaleSeries(rule, tss, ts)
}
e.purgeStaleSeries(newRules)
if len(e.previouslySentSeriesToRW) != len(expStaleRules) {
t.Fatalf("expected to get %d stale series, got %d",
len(expStaleRules), len(e.previouslySentSeriesToRW))
}
for _, exp := range expStaleRules {
if _, ok := e.previouslySentSeriesToRW[exp.ID()]; !ok {
t.Fatalf("expected to have rule %d; got nil instead", exp.ID())
}
}
}
f(nil, nil, nil)
f(
nil,
[]Rule{&AlertingRule{RuleID: 1}},
nil,
)
f(
[]Rule{&AlertingRule{RuleID: 1}},
nil,
nil,
)
f(
[]Rule{&AlertingRule{RuleID: 1}},
[]Rule{&AlertingRule{RuleID: 2}},
nil,
)
f(
[]Rule{&AlertingRule{RuleID: 1}, &AlertingRule{RuleID: 2}},
[]Rule{&AlertingRule{RuleID: 2}},
[]Rule{&AlertingRule{RuleID: 2}},
)
f(
[]Rule{&AlertingRule{RuleID: 1}, &AlertingRule{RuleID: 2}},
[]Rule{&AlertingRule{RuleID: 1}, &AlertingRule{RuleID: 2}},
[]Rule{&AlertingRule{RuleID: 1}, &AlertingRule{RuleID: 2}},
)
}
func TestFaultyNotifier(t *testing.T) {
fq := &datasource.FakeQuerier{}
fq.Add(metricWithValueAndLabels(t, 1, "__name__", "foo", "job", "bar"))
r := newTestAlertingRule("instant", 0)
r.q = fq
fn := &notifier.FakeNotifier{}
e := &executor{
Notifiers: func() []notifier.Notifier {
return []notifier.Notifier{
&notifier.FaultyNotifier{},
fn,
}
},
}
delay := 5 * time.Second
ctx, cancel := context.WithTimeout(context.Background(), delay)
defer cancel()
go func() {
_ = e.exec(ctx, r, time.Now(), 0, 10)
}()
tn := time.Now()
deadline := tn.Add(delay / 2)
for {
if fn.GetCounter() > 0 {
return
}
if tn.After(deadline) {
break
}
tn = time.Now()
time.Sleep(time.Millisecond * 100)
}
t.Fatalf("alive notifier didn't receive notification by %v", deadline)
}
func TestFaultyRW(t *testing.T) {
fq := &datasource.FakeQuerier{}
fq.Add(metricWithValueAndLabels(t, 1, "__name__", "foo", "job", "bar"))
r := &RecordingRule{
Name: "test",
q: fq,
state: &ruleState{entries: make([]StateEntry, 10)},
}
e := &executor{
Rw: &remotewrite.Client{},
previouslySentSeriesToRW: make(map[uint64]map[string][]prompbmarshal.Label),
}
err := e.exec(context.Background(), r, time.Now(), 0, 10)
if err == nil {
t.Fatalf("expected to get an error from faulty RW client, got nil instead")
}
}
func TestCloseWithEvalInterruption(t *testing.T) {
const (
rules = `
- name: groupTest
rules:
- alert: VMRows
for: 1ms
expr: vm_rows > 0
labels:
label: bar
host: "{{ $labels.instance }}"
annotations:
summary: "{{ $value }}"
`
)
var groups []config.Group
err := yaml.Unmarshal([]byte(rules), &groups)
if err != nil {
t.Fatalf("failed to parse rules: %s", err)
}
const delay = time.Second * 2
fq := &datasource.FakeQuerierWithDelay{Delay: delay}
const evalInterval = time.Millisecond
g := NewGroup(groups[0], fq, evalInterval, nil)
go g.Start(context.Background(), nil, nil, nil)
time.Sleep(evalInterval * 20)
go func() {
g.Close()
}()
deadline := time.Tick(delay / 2)
select {
case <-deadline:
t.Fatalf("deadline for close exceeded")
case <-g.finishedCh:
}
}
func TestGroupStartDelay(t *testing.T) {
g := &Group{}
// interval of 5min and key generate a static delay of 30s
g.Interval = time.Minute * 5
key := uint64(math.MaxUint64 / 10)
f := func(atS, expS string) {
t.Helper()
at, err := time.Parse(time.RFC3339Nano, atS)
if err != nil {
t.Fatal(err)
}
expTS, err := time.Parse(time.RFC3339Nano, expS)
if err != nil {
t.Fatal(err)
}
delay := delayBeforeStart(at, key, g.Interval, g.EvalOffset)
gotStart := at.Add(delay)
if expTS != gotStart {
t.Fatalf("expected to get %v; got %v instead", expTS, gotStart)
}
}
// test group without offset
f("2023-01-01T00:00:00.000+00:00", "2023-01-01T00:00:30.000+00:00")
f("2023-01-01T00:00:00.999+00:00", "2023-01-01T00:00:30.000+00:00")
f("2023-01-01T00:00:29.000+00:00", "2023-01-01T00:00:30.000+00:00")
f("2023-01-01T00:00:31.000+00:00", "2023-01-01T00:05:30.000+00:00")
// test group with offset smaller than above fixed randSleep,
// this way randSleep will always be enough
offset := 20 * time.Second
g.EvalOffset = &offset
f("2023-01-01T00:00:00.000+00:00", "2023-01-01T00:00:30.000+00:00")
f("2023-01-01T00:00:29.000+00:00", "2023-01-01T00:00:30.000+00:00")
f("2023-01-01T00:00:31.000+00:00", "2023-01-01T00:05:30.000+00:00")
// test group with offset bigger than above fixed randSleep,
// this way offset will be added to delay
offset = 3 * time.Minute
g.EvalOffset = &offset
f("2023-01-01T00:00:00.000+00:00", "2023-01-01T00:03:30.000+00:00")
f("2023-01-01T00:00:29.000+00:00", "2023-01-01T00:03:30.000+00:00")
f("2023-01-01T00:01:00.000+00:00", "2023-01-01T00:08:30.000+00:00")
f("2023-01-01T00:03:30.000+00:00", "2023-01-01T00:08:30.000+00:00")
f("2023-01-01T00:07:30.000+00:00", "2023-01-01T00:13:30.000+00:00")
offset = 10 * time.Minute
g.EvalOffset = &offset
// interval of 1h and key generate a static delay of 6m
g.Interval = time.Hour
f("2023-01-01T00:00:00.000+00:00", "2023-01-01T00:16:00.000+00:00")
f("2023-01-01T00:05:00.000+00:00", "2023-01-01T00:16:00.000+00:00")
f("2023-01-01T00:30:00.000+00:00", "2023-01-01T01:16:00.000+00:00")
}
func TestGetPrometheusReqTimestamp(t *testing.T) {
f := func(g *Group, tsOrigin, tsExpected string) {
t.Helper()
originT, _ := time.Parse(time.RFC3339, tsOrigin)
expT, _ := time.Parse(time.RFC3339, tsExpected)
gotTS := g.adjustReqTimestamp(originT)
if !gotTS.Equal(expT) {
t.Fatalf("get wrong prometheus request timestamp: %s; want %s", gotTS, expT)
}
}
offset := 30 * time.Minute
evalDelay := 1 * time.Minute
disableAlign := false
// with query align + default evalDelay
f(&Group{
Interval: time.Hour,
}, "2023-08-28T11:11:00+00:00", "2023-08-28T11:00:00+00:00")
// without query align + default evalDelay
f(&Group{
Interval: time.Hour,
evalAlignment: &disableAlign,
}, "2023-08-28T11:11:00+00:00", "2023-08-28T11:10:30+00:00")
// with eval_offset, find previous offset point + default evalDelay
f(&Group{
EvalOffset: &offset,
Interval: time.Hour,
}, "2023-08-28T11:11:00+00:00", "2023-08-28T10:30:00+00:00")
// with eval_offset + default evalDelay
f(&Group{
EvalOffset: &offset,
Interval: time.Hour,
}, "2023-08-28T11:41:00+00:00", "2023-08-28T11:30:00+00:00")
// 1h interval with eval_delay
f(&Group{
EvalDelay: &evalDelay,
Interval: time.Hour,
}, "2023-08-28T11:41:00+00:00", "2023-08-28T11:00:00+00:00")
// 1m interval with eval_delay
f(&Group{
EvalDelay: &evalDelay,
Interval: time.Minute,
}, "2023-08-28T11:41:13+00:00", "2023-08-28T11:40:00+00:00")
// disable alignment with eval_delay
f(&Group{
EvalDelay: &evalDelay,
Interval: time.Hour,
evalAlignment: &disableAlign,
}, "2023-08-28T11:41:00+00:00", "2023-08-28T11:40:00+00:00")
}
func TestRangeIterator(t *testing.T) {
f := func(ri rangeIterator, resultExpected [][2]time.Time) {
t.Helper()
var j int
for ri.next() {
if len(resultExpected) < j+1 {
t.Fatalf("unexpected result for iterator on step %d: %v - %v", j, ri.s, ri.e)
}
s, e := ri.s, ri.e
expS, expE := resultExpected[j][0], resultExpected[j][1]
if s != expS {
t.Fatalf("expected to get start=%v; got %v", expS, s)
}
if e != expE {
t.Fatalf("expected to get end=%v; got %v", expE, e)
}
j++
}
}
f(rangeIterator{
start: parseTime(t, "2021-01-01T12:00:00.000Z"),
end: parseTime(t, "2021-01-01T12:30:00.000Z"),
step: 5 * time.Minute,
}, [][2]time.Time{
{parseTime(t, "2021-01-01T12:00:00.000Z"), parseTime(t, "2021-01-01T12:05:00.000Z")},
{parseTime(t, "2021-01-01T12:05:00.000Z"), parseTime(t, "2021-01-01T12:10:00.000Z")},
{parseTime(t, "2021-01-01T12:10:00.000Z"), parseTime(t, "2021-01-01T12:15:00.000Z")},
{parseTime(t, "2021-01-01T12:15:00.000Z"), parseTime(t, "2021-01-01T12:20:00.000Z")},
{parseTime(t, "2021-01-01T12:20:00.000Z"), parseTime(t, "2021-01-01T12:25:00.000Z")},
{parseTime(t, "2021-01-01T12:25:00.000Z"), parseTime(t, "2021-01-01T12:30:00.000Z")},
})
f(rangeIterator{
start: parseTime(t, "2021-01-01T12:00:00.000Z"),
end: parseTime(t, "2021-01-01T12:30:00.000Z"),
step: 45 * time.Minute,
}, [][2]time.Time{
{parseTime(t, "2021-01-01T12:00:00.000Z"), parseTime(t, "2021-01-01T12:30:00.000Z")},
{parseTime(t, "2021-01-01T12:30:00.000Z"), parseTime(t, "2021-01-01T12:30:00.000Z")},
})
f(rangeIterator{
start: parseTime(t, "2021-01-01T12:00:12.000Z"),
end: parseTime(t, "2021-01-01T12:00:17.000Z"),
step: time.Second,
}, [][2]time.Time{
{parseTime(t, "2021-01-01T12:00:12.000Z"), parseTime(t, "2021-01-01T12:00:13.000Z")},
{parseTime(t, "2021-01-01T12:00:13.000Z"), parseTime(t, "2021-01-01T12:00:14.000Z")},
{parseTime(t, "2021-01-01T12:00:14.000Z"), parseTime(t, "2021-01-01T12:00:15.000Z")},
{parseTime(t, "2021-01-01T12:00:15.000Z"), parseTime(t, "2021-01-01T12:00:16.000Z")},
{parseTime(t, "2021-01-01T12:00:16.000Z"), parseTime(t, "2021-01-01T12:00:17.000Z")},
})
}
func parseTime(t *testing.T, s string) time.Time {
t.Helper()
tt, err := time.Parse("2006-01-02T15:04:05.000Z", s)
if err != nil {
t.Fatal(err)
}
return tt
}