VictoriaMetrics/vendor/github.com/ergochat/readline/terminal.go

package readline

import (
	"bufio"
	"bytes"
	"errors"
	"fmt"
	"io"
	"strconv"
	"sync"
	"sync/atomic"
	"time"

	"github.com/ergochat/readline/internal/ansi"
	"github.com/ergochat/readline/internal/platform"
)

const (
	// see waitForDSR
	dsrTimeout = 250 * time.Millisecond

	maxAnsiLen = 32

	// how many non-CPR reads to buffer while waiting for a CPR response
	maxCPRBufferLen = 128 * 1024
)

var (
	deadlineExceeded = errors.New("deadline exceeded")
	concurrentReads  = errors.New("concurrent read operations detected")
	invalidCPR       = errors.New("invalid CPR response")
)

/*
terminal manages terminal input. The design constraints here are somewhat complex:

1. Calls to (*Instance).Readline() must always be preemptible by (*Instance).Close.
   This could be handled at the Operation layer instead; however, it's cleaner
   to provide an API in terminal itself that can interrupt attempts to read.
2. In between calls to Readline(), or *after* a call to (*Instance).Close(),
   stdin must be available for code outside of this library to read from. The
   problem is that reads from stdin in Go are not preemptible (see, for example,
   https://github.com/golang/go/issues/24842 ). In the worst case, an
   interrupted read will leave (*terminal).ioloop() running, and it will
   consume one more user keystroke before it exits. However, it is a design goal
   to read as little as possible at a time.
3. We have to handle the DSR ("device status report") query and the
   CPR ("cursor position report") response:
   https://vt100.net/docs/vt510-rm/DSR-CPR.html
   This involves writing an ANSI escape sequence to stdout, then waiting
   for the terminal to asynchronously write an ANSI escape sequence to stdin.
   We have to pick this value out of the stream and process it without
   disrupting the handling of actual user input. Moreover, concurrent Close()
   while a CPR query is in flight should ensure (if possible) that the
   response is actually read; otherwise the response may be printed to the
   screen, disrupting the user experience.

Accordingly, the concurrency design is as follows:

1. ioloop() runs asynchronously. It operates in lockstep with the read methods:
   each synchronous receive from kickChan is matched with a synchronous send to
   outChan. It does blocking reads from stdin, reading as little as possible at
   a time, and passing the results back over outChan.
2. The read methods ("internal public API") GetRune() and GetCursorPosition()
   are not concurrency-safe and must be called in serial. They are backed by
   readFromStdin, which wakes ioloop() if necessary and waits for a response.
   If GetCursorPosition() reads non-CPR data, it will buffer it for GetRune()
   to read later.
3. Close() can be called asynchronously. It interrupts ioloop() (unless ioloop()
   is actually reading from stdin, in which case it interrupts it after the next
   keystroke), and also interrupts any in-progress GetRune() call. If
   GetCursorPosition() is in progress, it tries to wait until the CPR response
   has been received. It is idempotent and can be called multiple times.
*/

type terminal struct {
	cfg        atomic.Pointer[Config]
	dimensions atomic.Pointer[termDimensions]
	closeOnce  sync.Once
	closeErr   error
	outChan    chan readResult
	kickChan   chan struct{}
	stopChan   chan struct{}
	buffer     []rune // actual input that we saw while waiting for the CPR
	inFlight   bool   // tracks whether we initiated a read and then gave up waiting
	sleeping   int32

	// asynchronously receive DSR messages from the terminal,
	// ensuring at most one query is in flight at a time
	dsrLock sync.Mutex
	dsrDone chan struct{} // nil if there is no DSR query in flight
}

// termDimensions stores the terminal width and height (-1 means unknown)
type termDimensions struct {
	width  int
	height int
}

type cursorPosition struct {
	row int
	col int
}

// readResult represents the result of a single "read operation" from the
// perspective of terminal. it may be a pure no-op. the consumer needs to
// read again if it didn't get what it wanted
type readResult struct {
	r  rune
	ok bool // is `r` valid user input? if not, we may need to read again
	// other data that can be conveyed in a single read operation;
	// currently only the CPR:
	pos *cursorPosition
}

func newTerminal(cfg *Config) (*terminal, error) {
	if cfg.isInteractive {
		if ansiErr := ansi.EnableANSI(); ansiErr != nil {
			return nil, fmt.Errorf("Could not enable ANSI escapes: %w", ansiErr)
		}
	}
	t := &terminal{
		kickChan: make(chan struct{}),
		outChan:  make(chan readResult),
		stopChan: make(chan struct{}),
	}
	t.SetConfig(cfg)
	// Get and cache the current terminal size.
	t.OnSizeChange()

	go t.ioloop()
	return t, nil
}

// SleepToResume will sleep myself, and return only if I'm resumed.
func (t *terminal) SleepToResume() {
	if !atomic.CompareAndSwapInt32(&t.sleeping, 0, 1) {
		return
	}
	defer atomic.StoreInt32(&t.sleeping, 0)

	t.ExitRawMode()
	platform.SuspendProcess()
	t.EnterRawMode()
}

func (t *terminal) EnterRawMode() (err error) {
	return t.GetConfig().FuncMakeRaw()
}

func (t *terminal) ExitRawMode() (err error) {
	return t.GetConfig().FuncExitRaw()
}

func (t *terminal) Write(b []byte) (int, error) {
	return t.GetConfig().Stdout.Write(b)
}

// getOffset sends a DSR query to get the current offset, then blocks
// until the query returns.
func (t *terminal) GetCursorPosition(deadline chan struct{}) (cursorPosition, error) {
	// ensure there is no in-flight query, set up a waiter
	ok := func() (ok bool) {
		t.dsrLock.Lock()
		defer t.dsrLock.Unlock()
		if t.dsrDone == nil {
			t.dsrDone = make(chan struct{})
			ok = true
		}
		return
	}()

	if !ok {
		return cursorPosition{-1, -1}, concurrentReads
	}

	defer func() {
		t.dsrLock.Lock()
		defer t.dsrLock.Unlock()
		close(t.dsrDone)
		t.dsrDone = nil
	}()

	// send the DSR Cursor Position Report request to terminal stdout:
	// https://vt100.net/docs/vt510-rm/DSR-CPR.html
	_, err := t.Write([]byte("\x1b[6n"))
	if err != nil {
		return cursorPosition{-1, -1}, err
	}

	for {
		result, err := t.readFromStdin(deadline)
		if err != nil {
			return cursorPosition{-1, -1}, err
		}
		if result.ok {
			// non-CPR input, save it to be read later:
			t.buffer = append(t.buffer, result.r)
			if len(t.buffer) > maxCPRBufferLen {
				panic("did not receive DSR CPR response")
			}
		}
		if result.pos != nil {
			return *result.pos, nil
		}
	}
}

// waitForDSR waits for any in-flight DSR query to complete. this prevents
// garbage from being written to the terminal when Close() interrupts an
// in-flight query.
func (t *terminal) waitForDSR() {
	t.dsrLock.Lock()
	dsrDone := t.dsrDone
	t.dsrLock.Unlock()
	if dsrDone != nil {
		// tradeoffs: if the timeout is too high, we risk slowing down Close();
		// if it's too low, we risk writing the CPR to the terminal, which is bad UX,
		// but neither of these outcomes is catastrophic
		timer := time.NewTimer(dsrTimeout)
		select {
		case <-dsrDone:
		case <-timer.C:
		}
		timer.Stop()
	}
}

func (t *terminal) GetRune(deadline chan struct{}) (rune, error) {
	if len(t.buffer) > 0 {
		result := t.buffer[0]
		t.buffer = t.buffer[1:]
		return result, nil
	}
	return t.getRuneFromStdin(deadline)
}

func (t *terminal) getRuneFromStdin(deadline chan struct{}) (rune, error) {
	for {
		result, err := t.readFromStdin(deadline)
		if err != nil {
			return 0, err
		} else if result.ok {
			return result.r, nil
		} // else: CPR or something else we didn't understand, read again
	}
}

func (t *terminal) readFromStdin(deadline chan struct{}) (result readResult, err error) {
	// we may have sent a kick previously and given up on the response;
	// if so, don't kick again (we will try again to read the pending response)
	if !t.inFlight {
		select {
		case t.kickChan <- struct{}{}:
			t.inFlight = true
		case <-t.stopChan:
			return result, io.EOF
		case <-deadline:
			return result, deadlineExceeded
		}
	}

	select {
	case result = <-t.outChan:
		t.inFlight = false
		return result, nil
	case <-t.stopChan:
		return result, io.EOF
	case <-deadline:
		return result, deadlineExceeded
	}
}

func (t *terminal) ioloop() {
	// ensure close if we get an error from stdio
	defer t.Close()

	buf := bufio.NewReader(t.GetConfig().Stdin)
	var ansiBuf bytes.Buffer

	for {
		select {
		case <-t.kickChan:
		case <-t.stopChan:
			return
		}

		r, _, err := buf.ReadRune()
		if err != nil {
			return
		}

		var result readResult
		if r == '\x1b' {
			// we're starting an ANSI escape sequence:
			// keep reading until we reach the end of the sequence
			result, err = t.consumeANSIEscape(buf, &ansiBuf)
			if err != nil {
				return
			}
		} else {
			result = readResult{r: r, ok: true}
		}

		select {
		case t.outChan <- result:
		case <-t.stopChan:
			return
		}
	}
}

func (t *terminal) consumeANSIEscape(buf *bufio.Reader, ansiBuf *bytes.Buffer) (result readResult, err error) {
	ansiBuf.Reset()
	initial, _, err := buf.ReadRune()
	if err != nil {
		return
	}
	// we already read one \x1b. this can indicate either the start of an ANSI
	// escape sequence, or a keychord with Alt (e.g. Alt+f produces `\x1bf` in
	// a typical xterm).
	switch initial {
	case 'f':
		// Alt-f in xterm, or Option+RightArrow in iTerm2 with "Natural text editing"
		return readResult{r: MetaForward, ok: true}, nil // Alt-f
	case 'b':
		// Alt-b in xterm, or Option+LeftArrow in iTerm2 with "Natural text editing"
		return readResult{r: MetaBackward, ok: true}, nil // Alt-b
	case '[', 'O':
		// this is a real ANSI escape sequence, read the rest of the sequence below:
	case '\x1b':
		// Alt plus a real ANSI escape sequence. Handle this specially since
		// right now the only cases we want to handle are the arrow keys:
		return consumeAltSequence(buf)
	default:
		return // invalid, ignore
	}

	// data consists of ; and 0-9 , anything else terminates the sequence
	var type_ rune
	for {
		r, _, err := buf.ReadRune()
		if err != nil {
			return result, err
		}
		if r == ';' || ('0' <= r && r <= '9') {
			ansiBuf.WriteRune(r)
		} else {
			type_ = r
			break
		}
	}

	var r rune
	switch type_ {
	case 'R':
		if initial == '[' {
			// DSR CPR response; if we can't parse it, just ignore it
			// (do not return an error here because that would stop ioloop())
			if cpos, err := parseCPRResponse(ansiBuf.Bytes()); err == nil {
				return readResult{r: 0, ok: false, pos: &cpos}, nil
			}
		}
	case 'D':
		if altModifierEnabled(ansiBuf.Bytes()) {
			r = MetaBackward
		} else {
			r = CharBackward
		}
	case 'C':
		if altModifierEnabled(ansiBuf.Bytes()) {
			r = MetaForward
		} else {
			r = CharForward
		}
	case 'A':
		r = CharPrev
	case 'B':
		r = CharNext
	case 'H':
		r = CharLineStart
	case 'F':
		r = CharLineEnd
	case '~':
		if initial == '[' {
			switch string(ansiBuf.Bytes()) {
			case "3":
				r = MetaDeleteKey // this is the key typically labeled "Delete"
			case "1", "7":
				r = CharLineStart // "Home" key
			case "4", "8":
				r = CharLineEnd // "End" key
			}
		}
	case 'Z':
		if initial == '[' {
			r = MetaShiftTab
		}
	}

	if r != 0 {
		return readResult{r: r, ok: true}, nil
	}
	return // default: no interpretable rune value
}

func consumeAltSequence(buf *bufio.Reader) (result readResult, err error) {
	initial, _, err := buf.ReadRune()
	if err != nil {
		return
	}
	if initial != '[' {
		return
	}
	second, _, err := buf.ReadRune()
	if err != nil {
		return
	}
	switch second {
	case 'D':
		return readResult{r: MetaBackward, ok: true}, nil
	case 'C':
		return readResult{r: MetaForward, ok: true}, nil
	default:
		return
	}
}

func altModifierEnabled(payload []byte) bool {
	// https://www.xfree86.org/current/ctlseqs.html ; modifier keycodes
	// go after the semicolon, e.g. Alt-LeftArrow is `\x1b[1;3D` in VTE
	// terminals, where 3 indicates Alt
	if semicolonIdx := bytes.IndexByte(payload, ';'); semicolonIdx != -1 {
		if string(payload[semicolonIdx+1:]) == "3" {
			return true
		}
	}
	return false
}

func parseCPRResponse(payload []byte) (cursorPosition, error) {
	if semicolonIdx := bytes.IndexByte(payload, ';'); semicolonIdx != -1 {
		if row, err := strconv.Atoi(string(payload[:semicolonIdx])); err == nil {
			if col, err := strconv.Atoi(string(payload[semicolonIdx+1:])); err == nil {
				return cursorPosition{row: row, col: col}, nil
			}
		}
	}
	return cursorPosition{-1, -1}, invalidCPR
}

func (t *terminal) Bell() {
	t.Write([]byte{CharBell})
}

func (t *terminal) Close() error {
	t.closeOnce.Do(func() {
		t.waitForDSR()
		close(t.stopChan)
		// don't close outChan; outChan results should always be valid.
		// instead we always select on both outChan and stopChan
		t.closeErr = t.ExitRawMode()
	})
	return t.closeErr
}

func (t *terminal) SetConfig(c *Config) error {
	t.cfg.Store(c)
	return nil
}

func (t *terminal) GetConfig() *Config {
	return t.cfg.Load()
}

// OnSizeChange gets the current terminal size and caches it
func (t *terminal) OnSizeChange() {
	cfg := t.GetConfig()
	width, height := cfg.FuncGetSize()
	t.dimensions.Store(&termDimensions{
		width:  width,
		height: height,
	})
}

// GetWidthHeight returns the cached width, height values from the terminal
func (t *terminal) GetWidthHeight() (width, height int) {
	dimensions := t.dimensions.Load()
	return dimensions.width, dimensions.height
}