VictoriaMetrics/app/vmalert/rule/alerting.go

713 lines
21 KiB
Go
Raw Normal View History

package rule
import (
"context"
"fmt"
"hash/fnv"
"sort"
"strings"
"sync"
"time"
"github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/config"
"github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/datasource"
"github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/notifier"
"github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/templates"
"github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/utils"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/prompbmarshal"
)
// AlertingRule is basic alert entity
type AlertingRule struct {
Type config.Type
RuleID uint64
Name string
Expr string
For time.Duration
KeepFiringFor time.Duration
Labels map[string]string
Annotations map[string]string
GroupID uint64
GroupName string
File string
EvalInterval time.Duration
Debug bool
q datasource.Querier
alertsMu sync.RWMutex
// stores list of active alerts
alerts map[uint64]*notifier.Alert
// state stores recent state changes
// during evaluations
state *ruleState
app/vmalert: extend metrics set exported by `vmalert` #573 (#654) * app/vmalert: extend metrics set exported by `vmalert` #573 New metrics were added to improve observability: + vmalert_alerts_pending{alertname, group} - number of pending alerts per group per alert; + vmalert_alerts_acitve{alertname, group} - number of active alerts per group per alert; + vmalert_alerts_error{alertname, group} - is 1 if alertname ended up with error during prev execution, is 0 if no errors happened; + vmalert_recording_rules_error{recording, group} - is 1 if recording rule ended up with error during prev execution, is 0 if no errors happened; * vmalert_iteration_total{group, file} - now contains group and file name labels. This should improve control over specific groups; * vmalert_iteration_duration_seconds{group, file} - now contains group and file name labels. This should improve control over specific groups; Some collisions for alerts and recording rules are possible, because neither group name nor alert/recording rule name are unique for compatibility reasons. Commit contains list of TODOs for Unregistering metrics since groups and rules are ephemeral and could be removed without application restart. In order to unlock Unregistering feature corresponding PR was filed - https://github.com/VictoriaMetrics/metrics/pull/13 * app/vmalert: extend metrics set exported by `vmalert` #573 The changes are following: * add an ID label to rules metrics, since `name` collisions within one group is a common case - see the k8s example alerts; * supports metrics unregistering on rule updates. Consider the case when one rule was added or removed from the group, or the whole group was added or removed. The change depends on https://github.com/VictoriaMetrics/metrics/pull/16 where race condition for Unregister method was fixed.
2020-08-09 06:41:29 +00:00
metrics *alertingRuleMetrics
}
type alertingRuleMetrics struct {
errors *utils.Counter
pending *utils.Gauge
active *utils.Gauge
samples *utils.Gauge
seriesFetched *utils.Gauge
}
// NewAlertingRule creates a new AlertingRule
func NewAlertingRule(qb datasource.QuerierBuilder, group *Group, cfg config.Rule) *AlertingRule {
app/vmalert: extend metrics set exported by `vmalert` #573 (#654) * app/vmalert: extend metrics set exported by `vmalert` #573 New metrics were added to improve observability: + vmalert_alerts_pending{alertname, group} - number of pending alerts per group per alert; + vmalert_alerts_acitve{alertname, group} - number of active alerts per group per alert; + vmalert_alerts_error{alertname, group} - is 1 if alertname ended up with error during prev execution, is 0 if no errors happened; + vmalert_recording_rules_error{recording, group} - is 1 if recording rule ended up with error during prev execution, is 0 if no errors happened; * vmalert_iteration_total{group, file} - now contains group and file name labels. This should improve control over specific groups; * vmalert_iteration_duration_seconds{group, file} - now contains group and file name labels. This should improve control over specific groups; Some collisions for alerts and recording rules are possible, because neither group name nor alert/recording rule name are unique for compatibility reasons. Commit contains list of TODOs for Unregistering metrics since groups and rules are ephemeral and could be removed without application restart. In order to unlock Unregistering feature corresponding PR was filed - https://github.com/VictoriaMetrics/metrics/pull/13 * app/vmalert: extend metrics set exported by `vmalert` #573 The changes are following: * add an ID label to rules metrics, since `name` collisions within one group is a common case - see the k8s example alerts; * supports metrics unregistering on rule updates. Consider the case when one rule was added or removed from the group, or the whole group was added or removed. The change depends on https://github.com/VictoriaMetrics/metrics/pull/16 where race condition for Unregister method was fixed.
2020-08-09 06:41:29 +00:00
ar := &AlertingRule{
Type: group.Type,
RuleID: cfg.ID,
Name: cfg.Alert,
Expr: cfg.Expr,
For: cfg.For.Duration(),
KeepFiringFor: cfg.KeepFiringFor.Duration(),
Labels: cfg.Labels,
Annotations: cfg.Annotations,
GroupID: group.ID(),
GroupName: group.Name,
File: group.File,
EvalInterval: group.Interval,
Debug: cfg.Debug,
q: qb.BuildWithParams(datasource.QuerierParams{
DataSourceType: group.Type.String(),
EvaluationInterval: group.Interval,
QueryParams: group.Params,
Headers: group.Headers,
Debug: cfg.Debug,
}),
alerts: make(map[uint64]*notifier.Alert),
metrics: &alertingRuleMetrics{},
}
app/vmalert: extend metrics set exported by `vmalert` #573 (#654) * app/vmalert: extend metrics set exported by `vmalert` #573 New metrics were added to improve observability: + vmalert_alerts_pending{alertname, group} - number of pending alerts per group per alert; + vmalert_alerts_acitve{alertname, group} - number of active alerts per group per alert; + vmalert_alerts_error{alertname, group} - is 1 if alertname ended up with error during prev execution, is 0 if no errors happened; + vmalert_recording_rules_error{recording, group} - is 1 if recording rule ended up with error during prev execution, is 0 if no errors happened; * vmalert_iteration_total{group, file} - now contains group and file name labels. This should improve control over specific groups; * vmalert_iteration_duration_seconds{group, file} - now contains group and file name labels. This should improve control over specific groups; Some collisions for alerts and recording rules are possible, because neither group name nor alert/recording rule name are unique for compatibility reasons. Commit contains list of TODOs for Unregistering metrics since groups and rules are ephemeral and could be removed without application restart. In order to unlock Unregistering feature corresponding PR was filed - https://github.com/VictoriaMetrics/metrics/pull/13 * app/vmalert: extend metrics set exported by `vmalert` #573 The changes are following: * add an ID label to rules metrics, since `name` collisions within one group is a common case - see the k8s example alerts; * supports metrics unregistering on rule updates. Consider the case when one rule was added or removed from the group, or the whole group was added or removed. The change depends on https://github.com/VictoriaMetrics/metrics/pull/16 where race condition for Unregister method was fixed.
2020-08-09 06:41:29 +00:00
entrySize := *ruleUpdateEntriesLimit
if cfg.UpdateEntriesLimit != nil {
entrySize = *cfg.UpdateEntriesLimit
}
if entrySize < 1 {
entrySize = 1
}
ar.state = &ruleState{
entries: make([]StateEntry, entrySize),
}
labels := fmt.Sprintf(`alertname=%q, group=%q, file=%q, id="%d"`, ar.Name, group.Name, group.File, ar.ID())
ar.metrics.pending = utils.GetOrCreateGauge(fmt.Sprintf(`vmalert_alerts_pending{%s}`, labels),
app/vmalert: extend metrics set exported by `vmalert` #573 (#654) * app/vmalert: extend metrics set exported by `vmalert` #573 New metrics were added to improve observability: + vmalert_alerts_pending{alertname, group} - number of pending alerts per group per alert; + vmalert_alerts_acitve{alertname, group} - number of active alerts per group per alert; + vmalert_alerts_error{alertname, group} - is 1 if alertname ended up with error during prev execution, is 0 if no errors happened; + vmalert_recording_rules_error{recording, group} - is 1 if recording rule ended up with error during prev execution, is 0 if no errors happened; * vmalert_iteration_total{group, file} - now contains group and file name labels. This should improve control over specific groups; * vmalert_iteration_duration_seconds{group, file} - now contains group and file name labels. This should improve control over specific groups; Some collisions for alerts and recording rules are possible, because neither group name nor alert/recording rule name are unique for compatibility reasons. Commit contains list of TODOs for Unregistering metrics since groups and rules are ephemeral and could be removed without application restart. In order to unlock Unregistering feature corresponding PR was filed - https://github.com/VictoriaMetrics/metrics/pull/13 * app/vmalert: extend metrics set exported by `vmalert` #573 The changes are following: * add an ID label to rules metrics, since `name` collisions within one group is a common case - see the k8s example alerts; * supports metrics unregistering on rule updates. Consider the case when one rule was added or removed from the group, or the whole group was added or removed. The change depends on https://github.com/VictoriaMetrics/metrics/pull/16 where race condition for Unregister method was fixed.
2020-08-09 06:41:29 +00:00
func() float64 {
ar.alertsMu.RLock()
defer ar.alertsMu.RUnlock()
app/vmalert: extend metrics set exported by `vmalert` #573 (#654) * app/vmalert: extend metrics set exported by `vmalert` #573 New metrics were added to improve observability: + vmalert_alerts_pending{alertname, group} - number of pending alerts per group per alert; + vmalert_alerts_acitve{alertname, group} - number of active alerts per group per alert; + vmalert_alerts_error{alertname, group} - is 1 if alertname ended up with error during prev execution, is 0 if no errors happened; + vmalert_recording_rules_error{recording, group} - is 1 if recording rule ended up with error during prev execution, is 0 if no errors happened; * vmalert_iteration_total{group, file} - now contains group and file name labels. This should improve control over specific groups; * vmalert_iteration_duration_seconds{group, file} - now contains group and file name labels. This should improve control over specific groups; Some collisions for alerts and recording rules are possible, because neither group name nor alert/recording rule name are unique for compatibility reasons. Commit contains list of TODOs for Unregistering metrics since groups and rules are ephemeral and could be removed without application restart. In order to unlock Unregistering feature corresponding PR was filed - https://github.com/VictoriaMetrics/metrics/pull/13 * app/vmalert: extend metrics set exported by `vmalert` #573 The changes are following: * add an ID label to rules metrics, since `name` collisions within one group is a common case - see the k8s example alerts; * supports metrics unregistering on rule updates. Consider the case when one rule was added or removed from the group, or the whole group was added or removed. The change depends on https://github.com/VictoriaMetrics/metrics/pull/16 where race condition for Unregister method was fixed.
2020-08-09 06:41:29 +00:00
var num int
for _, a := range ar.alerts {
if a.State == notifier.StatePending {
num++
}
}
return float64(num)
})
ar.metrics.active = utils.GetOrCreateGauge(fmt.Sprintf(`vmalert_alerts_firing{%s}`, labels),
app/vmalert: extend metrics set exported by `vmalert` #573 (#654) * app/vmalert: extend metrics set exported by `vmalert` #573 New metrics were added to improve observability: + vmalert_alerts_pending{alertname, group} - number of pending alerts per group per alert; + vmalert_alerts_acitve{alertname, group} - number of active alerts per group per alert; + vmalert_alerts_error{alertname, group} - is 1 if alertname ended up with error during prev execution, is 0 if no errors happened; + vmalert_recording_rules_error{recording, group} - is 1 if recording rule ended up with error during prev execution, is 0 if no errors happened; * vmalert_iteration_total{group, file} - now contains group and file name labels. This should improve control over specific groups; * vmalert_iteration_duration_seconds{group, file} - now contains group and file name labels. This should improve control over specific groups; Some collisions for alerts and recording rules are possible, because neither group name nor alert/recording rule name are unique for compatibility reasons. Commit contains list of TODOs for Unregistering metrics since groups and rules are ephemeral and could be removed without application restart. In order to unlock Unregistering feature corresponding PR was filed - https://github.com/VictoriaMetrics/metrics/pull/13 * app/vmalert: extend metrics set exported by `vmalert` #573 The changes are following: * add an ID label to rules metrics, since `name` collisions within one group is a common case - see the k8s example alerts; * supports metrics unregistering on rule updates. Consider the case when one rule was added or removed from the group, or the whole group was added or removed. The change depends on https://github.com/VictoriaMetrics/metrics/pull/16 where race condition for Unregister method was fixed.
2020-08-09 06:41:29 +00:00
func() float64 {
ar.alertsMu.RLock()
defer ar.alertsMu.RUnlock()
app/vmalert: extend metrics set exported by `vmalert` #573 (#654) * app/vmalert: extend metrics set exported by `vmalert` #573 New metrics were added to improve observability: + vmalert_alerts_pending{alertname, group} - number of pending alerts per group per alert; + vmalert_alerts_acitve{alertname, group} - number of active alerts per group per alert; + vmalert_alerts_error{alertname, group} - is 1 if alertname ended up with error during prev execution, is 0 if no errors happened; + vmalert_recording_rules_error{recording, group} - is 1 if recording rule ended up with error during prev execution, is 0 if no errors happened; * vmalert_iteration_total{group, file} - now contains group and file name labels. This should improve control over specific groups; * vmalert_iteration_duration_seconds{group, file} - now contains group and file name labels. This should improve control over specific groups; Some collisions for alerts and recording rules are possible, because neither group name nor alert/recording rule name are unique for compatibility reasons. Commit contains list of TODOs for Unregistering metrics since groups and rules are ephemeral and could be removed without application restart. In order to unlock Unregistering feature corresponding PR was filed - https://github.com/VictoriaMetrics/metrics/pull/13 * app/vmalert: extend metrics set exported by `vmalert` #573 The changes are following: * add an ID label to rules metrics, since `name` collisions within one group is a common case - see the k8s example alerts; * supports metrics unregistering on rule updates. Consider the case when one rule was added or removed from the group, or the whole group was added or removed. The change depends on https://github.com/VictoriaMetrics/metrics/pull/16 where race condition for Unregister method was fixed.
2020-08-09 06:41:29 +00:00
var num int
for _, a := range ar.alerts {
if a.State == notifier.StateFiring {
num++
}
}
return float64(num)
})
ar.metrics.errors = utils.GetOrCreateCounter(fmt.Sprintf(`vmalert_alerting_rules_errors_total{%s}`, labels))
ar.metrics.samples = utils.GetOrCreateGauge(fmt.Sprintf(`vmalert_alerting_rules_last_evaluation_samples{%s}`, labels),
func() float64 {
e := ar.state.getLast()
return float64(e.Samples)
})
ar.metrics.seriesFetched = utils.GetOrCreateGauge(fmt.Sprintf(`vmalert_alerting_rules_last_evaluation_series_fetched{%s}`, labels),
func() float64 {
e := ar.state.getLast()
if e.SeriesFetched == nil {
// means seriesFetched is unsupported
return -1
}
seriesFetched := float64(*e.SeriesFetched)
if seriesFetched == 0 && e.Samples > 0 {
// `alert: 0.95` will fetch no series
// but will get one time series in response.
seriesFetched = float64(e.Samples)
}
return seriesFetched
})
app/vmalert: extend metrics set exported by `vmalert` #573 (#654) * app/vmalert: extend metrics set exported by `vmalert` #573 New metrics were added to improve observability: + vmalert_alerts_pending{alertname, group} - number of pending alerts per group per alert; + vmalert_alerts_acitve{alertname, group} - number of active alerts per group per alert; + vmalert_alerts_error{alertname, group} - is 1 if alertname ended up with error during prev execution, is 0 if no errors happened; + vmalert_recording_rules_error{recording, group} - is 1 if recording rule ended up with error during prev execution, is 0 if no errors happened; * vmalert_iteration_total{group, file} - now contains group and file name labels. This should improve control over specific groups; * vmalert_iteration_duration_seconds{group, file} - now contains group and file name labels. This should improve control over specific groups; Some collisions for alerts and recording rules are possible, because neither group name nor alert/recording rule name are unique for compatibility reasons. Commit contains list of TODOs for Unregistering metrics since groups and rules are ephemeral and could be removed without application restart. In order to unlock Unregistering feature corresponding PR was filed - https://github.com/VictoriaMetrics/metrics/pull/13 * app/vmalert: extend metrics set exported by `vmalert` #573 The changes are following: * add an ID label to rules metrics, since `name` collisions within one group is a common case - see the k8s example alerts; * supports metrics unregistering on rule updates. Consider the case when one rule was added or removed from the group, or the whole group was added or removed. The change depends on https://github.com/VictoriaMetrics/metrics/pull/16 where race condition for Unregister method was fixed.
2020-08-09 06:41:29 +00:00
return ar
}
// close unregisters rule metrics
func (ar *AlertingRule) close() {
ar.metrics.active.Unregister()
ar.metrics.pending.Unregister()
ar.metrics.errors.Unregister()
ar.metrics.samples.Unregister()
ar.metrics.seriesFetched.Unregister()
}
// String implements Stringer interface
func (ar *AlertingRule) String() string {
return ar.Name
}
// ID returns unique Rule ID
// within the parent Group.
func (ar *AlertingRule) ID() uint64 {
return ar.RuleID
}
// GetAlerts returns active alerts of rule
func (ar *AlertingRule) GetAlerts() []*notifier.Alert {
ar.alertsMu.RLock()
defer ar.alertsMu.RUnlock()
var alerts []*notifier.Alert
for _, a := range ar.alerts {
alerts = append(alerts, a)
}
return alerts
}
// GetAlert returns alert if id exists
func (ar *AlertingRule) GetAlert(id uint64) *notifier.Alert {
ar.alertsMu.RLock()
defer ar.alertsMu.RUnlock()
if ar.alerts == nil {
return nil
}
return ar.alerts[id]
}
func (ar *AlertingRule) logDebugf(at time.Time, a *notifier.Alert, format string, args ...any) {
if !ar.Debug {
return
}
prefix := fmt.Sprintf("DEBUG rule %q:%q (%d) at %v: ",
ar.GroupName, ar.Name, ar.RuleID, at.Format(time.RFC3339))
if a != nil {
labelKeys := make([]string, len(a.Labels))
var i int
for k := range a.Labels {
labelKeys[i] = k
i++
}
sort.Strings(labelKeys)
labels := make([]string, len(labelKeys))
for i, l := range labelKeys {
labels[i] = fmt.Sprintf("%s=%q", l, a.Labels[l])
}
labelsStr := strings.Join(labels, ",")
prefix += fmt.Sprintf("alert %d {%s} ", a.ID, labelsStr)
}
msg := fmt.Sprintf(format, args...)
logger.Infof("%s", prefix+msg)
}
// updateWith copies all significant fields.
// alerts state isn't copied since
// it should be updated in next 2 Execs
func (ar *AlertingRule) updateWith(r Rule) error {
nr, ok := r.(*AlertingRule)
if !ok {
return fmt.Errorf("BUG: attempt to update alerting rule with wrong type %#v", r)
}
ar.Expr = nr.Expr
ar.For = nr.For
ar.KeepFiringFor = nr.KeepFiringFor
ar.Labels = nr.Labels
ar.Annotations = nr.Annotations
ar.EvalInterval = nr.EvalInterval
ar.Debug = nr.Debug
ar.q = nr.q
ar.state = nr.state
return nil
}
type labelSet struct {
// origin labels extracted from received time series
// plus extra labels (group labels, service labels like alertNameLabel).
// in case of conflicts, origin labels from time series preferred.
// used for templating annotations
origin map[string]string
// processed labels includes origin labels
// plus extra labels (group labels, service labels like alertNameLabel).
// in case of key conflicts, origin labels are renamed with prefix `exported_` and extra labels are preferred.
// see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5161
// used as labels attached to notifier.Alert and ALERTS series written to remote storage.
processed map[string]string
}
// add adds a value v with key k to origin and processed label sets.
// On k conflicts in processed set, the passed v is preferred.
// On k conflicts in origin set, the original value is preferred and copied
// to processed with `exported_%k` key. The copy happens only if passed v isn't equal to origin[k] value.
func (ls *labelSet) add(k, v string) {
ls.processed[k] = v
ov, ok := ls.origin[k]
if !ok {
ls.origin[k] = v
return
}
if ov != v {
// copy value only if v and ov are different
key := fmt.Sprintf("exported_%s", k)
ls.processed[key] = ov
}
}
// toLabels converts labels from given Metric
// to labelSet which contains original and processed labels.
func (ar *AlertingRule) toLabels(m datasource.Metric, qFn templates.QueryFn) (*labelSet, error) {
ls := &labelSet{
origin: make(map[string]string),
processed: make(map[string]string),
}
for _, l := range m.Labels {
ls.origin[l.Name] = l.Value
// drop __name__ to be consistent with Prometheus alerting
if l.Name == "__name__" {
continue
}
ls.processed[l.Name] = l.Value
}
extraLabels, err := notifier.ExecTemplate(qFn, ar.Labels, notifier.AlertTplData{
Labels: ls.origin,
Value: m.Values[0],
Expr: ar.Expr,
})
if err != nil {
return nil, fmt.Errorf("failed to expand labels: %w", err)
}
for k, v := range extraLabels {
ls.add(k, v)
}
// set additional labels to identify group and rule name
if ar.Name != "" {
ls.add(alertNameLabel, ar.Name)
}
if !*disableAlertGroupLabel && ar.GroupName != "" {
ls.add(alertGroupNameLabel, ar.GroupName)
}
return ls, nil
}
// execRange executes alerting rule on the given time range similarly to exec.
// When making consecutive calls make sure to respect time linearity for start and end params,
// as this function modifies AlertingRule alerts state.
// It is not thread safe.
// It returns ALERT and ALERT_FOR_STATE time series as a result.
func (ar *AlertingRule) execRange(ctx context.Context, start, end time.Time) ([]prompbmarshal.TimeSeries, error) {
res, err := ar.q.QueryRange(ctx, ar.Expr, start, end)
if err != nil {
return nil, err
}
var result []prompbmarshal.TimeSeries
holdAlertState := make(map[uint64]*notifier.Alert)
qFn := func(_ string) ([]datasource.Metric, error) {
return nil, fmt.Errorf("`query` template isn't supported in replay mode")
}
for _, s := range res.Data {
ls, as, err := ar.expandTemplates(s, qFn, time.Time{})
if err != nil {
return nil, fmt.Errorf("failed to expand templates: %s", err)
}
alertID := hash(ls.processed)
a := ar.newAlert(s, time.Time{}, ls.processed, as) // initial alert
prevT := time.Time{}
for i := range s.Values {
at := time.Unix(s.Timestamps[i], 0)
// try to restore alert's state on the first iteration
if at.Equal(start) {
if _, ok := ar.alerts[alertID]; ok {
a = ar.alerts[alertID]
prevT = at
}
}
if at.Sub(prevT) > ar.EvalInterval {
// reset to Pending if there are gaps > EvalInterval between DPs
a.State = notifier.StatePending
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
a.ActiveAt = at
a.Start = time.Time{}
} else if at.Sub(a.ActiveAt) >= ar.For && a.State != notifier.StateFiring {
a.State = notifier.StateFiring
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
a.Start = at
}
prevT = at
if ar.For == 0 {
// rules with `for: 0` are always firing when they have Value
a.State = notifier.StateFiring
}
result = append(result, ar.alertToTimeSeries(a, s.Timestamps[i])...)
// save alert's state on last iteration, so it can be used on the next execRange call
if at.Equal(end) {
holdAlertState[alertID] = a
}
}
}
ar.alerts = holdAlertState
return result, nil
}
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
// resolvedRetention is the duration for which a resolved alert instance
// is kept in memory state and consequently repeatedly sent to the AlertManager.
const resolvedRetention = 15 * time.Minute
// exec executes AlertingRule expression via the given Querier.
// Based on the Querier results AlertingRule maintains notifier.Alerts
func (ar *AlertingRule) exec(ctx context.Context, ts time.Time, limit int) ([]prompbmarshal.TimeSeries, error) {
start := time.Now()
res, req, err := ar.q.Query(ctx, ar.Expr, ts)
curState := StateEntry{
Time: start,
At: ts,
Duration: time.Since(start),
Samples: len(res.Data),
SeriesFetched: res.SeriesFetched,
Err: err,
Curl: requestToCurl(req),
}
defer func() {
ar.state.add(curState)
if curState.Err != nil {
ar.metrics.errors.Inc()
}
}()
if err != nil {
return nil, fmt.Errorf("failed to execute query %q: %w", ar.Expr, err)
}
ar.logDebugf(ts, nil, "query returned %d samples (elapsed: %s)", curState.Samples, curState.Duration)
qFn := func(query string) ([]datasource.Metric, error) {
res, _, err := ar.q.Query(ctx, query, ts)
return res.Data, err
}
// template labels and annotations before updating ar.alerts,
// since they could use `query` function which takes a while to execute,
// see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6079.
expandedLabels := make([]*labelSet, len(res.Data))
expandedAnnotations := make([]map[string]string, len(res.Data))
for i, m := range res.Data {
ls, as, err := ar.expandTemplates(m, qFn, ts)
if err != nil {
curState.Err = fmt.Errorf("failed to expand templates: %w", err)
return nil, curState.Err
}
expandedLabels[i] = ls
expandedAnnotations[i] = as
}
ar.alertsMu.Lock()
defer ar.alertsMu.Unlock()
for h, a := range ar.alerts {
// cleanup inactive alerts from previous Exec
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
if a.State == notifier.StateInactive && ts.Sub(a.ResolvedAt) > resolvedRetention {
ar.logDebugf(ts, a, "deleted as inactive")
delete(ar.alerts, h)
}
}
updated := make(map[uint64]struct{})
// update list of active alerts
for i, m := range res.Data {
labels, annotations := expandedLabels[i], expandedAnnotations[i]
alertID := hash(labels.processed)
if _, ok := updated[alertID]; ok {
// duplicate may be caused the removal of `__name__` label
curState.Err = fmt.Errorf("labels %v: %w", labels.processed, errDuplicate)
return nil, curState.Err
}
updated[alertID] = struct{}{}
if a, ok := ar.alerts[alertID]; ok {
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
if a.State == notifier.StateInactive {
// alert could be in inactive state for resolvedRetention
// so when we again receive metrics for it - we switch it
// back to notifier.StatePending
a.State = notifier.StatePending
a.ActiveAt = ts
ar.logDebugf(ts, a, "INACTIVE => PENDING")
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
}
a.Value = m.Values[0]
a.Annotations = annotations
if err != nil {
return nil, err
}
a.KeepFiringSince = time.Time{}
continue
}
a := ar.newAlert(m, ts, labels.processed, annotations)
a.ID = alertID
a.State = notifier.StatePending
ar.alerts[alertID] = a
ar.logDebugf(ts, a, "created in state PENDING")
}
var numActivePending int
for h, a := range ar.alerts {
// if alert wasn't updated in this iteration
// means it is resolved already
if _, ok := updated[h]; !ok {
if a.State == notifier.StatePending {
// alert was in Pending state - it is not
// active anymore
delete(ar.alerts, h)
ar.logDebugf(ts, a, "PENDING => DELETED: is absent in current evaluation round")
continue
}
// check if alert should keep StateFiring if rule has
// `keep_firing_for` field
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
if a.State == notifier.StateFiring {
if ar.KeepFiringFor > 0 {
if a.KeepFiringSince.IsZero() {
a.KeepFiringSince = ts
}
}
// alerts with ar.KeepFiringFor>0 may remain FIRING
// even if their expression isn't true anymore
if ts.Sub(a.KeepFiringSince) >= ar.KeepFiringFor {
a.State = notifier.StateInactive
a.ResolvedAt = ts
ar.logDebugf(ts, a, "FIRING => INACTIVE: is absent in current evaluation round")
continue
}
ar.logDebugf(ts, a, "KEEP_FIRING: will keep firing for %fs since %v", ar.KeepFiringFor.Seconds(), a.KeepFiringSince)
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
}
}
numActivePending++
if a.State == notifier.StatePending && ts.Sub(a.ActiveAt) >= ar.For {
a.State = notifier.StateFiring
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
a.Start = ts
alertsFired.Inc()
ar.logDebugf(ts, a, "PENDING => FIRING: %s since becoming active at %v", ts.Sub(a.ActiveAt), a.ActiveAt)
}
}
if limit > 0 && numActivePending > limit {
ar.alerts = map[uint64]*notifier.Alert{}
curState.Err = fmt.Errorf("exec exceeded limit of %d with %d alerts", limit, numActivePending)
return nil, curState.Err
}
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
return ar.toTimeSeries(ts.Unix()), nil
}
func (ar *AlertingRule) expandTemplates(m datasource.Metric, qFn templates.QueryFn, ts time.Time) (*labelSet, map[string]string, error) {
ls, err := ar.toLabels(m, qFn)
if err != nil {
return nil, nil, fmt.Errorf("failed to expand labels: %w", err)
}
tplData := notifier.AlertTplData{
Value: m.Values[0],
Labels: ls.origin,
Expr: ar.Expr,
AlertID: hash(ls.processed),
GroupID: ar.GroupID,
ActiveAt: ts,
For: ar.For,
}
as, err := notifier.ExecTemplate(qFn, ar.Annotations, tplData)
if err != nil {
return nil, nil, fmt.Errorf("failed to template annotations: %w", err)
}
return ls, as, nil
}
func (ar *AlertingRule) toTimeSeries(timestamp int64) []prompbmarshal.TimeSeries {
var tss []prompbmarshal.TimeSeries
for _, a := range ar.alerts {
if a.State == notifier.StateInactive {
continue
}
ts := ar.alertToTimeSeries(a, timestamp)
tss = append(tss, ts...)
}
return tss
}
// TODO: consider hashing algorithm in VM
func hash(labels map[string]string) uint64 {
hash := fnv.New64a()
keys := make([]string, 0, len(labels))
for k := range labels {
keys = append(keys, k)
}
sort.Strings(keys)
for _, k := range keys {
// drop __name__ to be consistent with Prometheus alerting
if k == "__name__" {
continue
}
name, value := k, labels[k]
hash.Write([]byte(name))
hash.Write([]byte(value))
hash.Write([]byte("\xff"))
}
return hash.Sum64()
}
func (ar *AlertingRule) newAlert(m datasource.Metric, start time.Time, labels, annotations map[string]string) *notifier.Alert {
as := make(map[string]string)
if annotations != nil {
as = annotations
}
ls := make(map[string]string)
if labels != nil {
ls = labels
}
return &notifier.Alert{
GroupID: ar.GroupID,
Name: ar.Name,
Expr: ar.Expr,
For: ar.For,
ActiveAt: start,
Value: m.Values[0],
Labels: ls,
Annotations: as,
}
}
const (
// alertMetricName is the metric name for time series reflecting the alert state.
alertMetricName = "ALERTS"
// alertForStateMetricName is the metric name for time series reflecting the moment of time when alert became active.
alertForStateMetricName = "ALERTS_FOR_STATE"
// alertNameLabel is the label name indicating the name of an alert.
alertNameLabel = "alertname"
// alertStateLabel is the label name indicating the state of an alert.
alertStateLabel = "alertstate"
// alertGroupNameLabel defines the label name attached for generated time series.
// attaching this label may be disabled via `-disableAlertgroupLabel` flag.
alertGroupNameLabel = "alertgroup"
)
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
// alertToTimeSeries converts the given alert with the given timestamp to time series
func (ar *AlertingRule) alertToTimeSeries(a *notifier.Alert, timestamp int64) []prompbmarshal.TimeSeries {
return []prompbmarshal.TimeSeries{
alertToTimeSeries(a, timestamp),
alertForToTimeSeries(a, timestamp),
}
}
func alertToTimeSeries(a *notifier.Alert, timestamp int64) prompbmarshal.TimeSeries {
labels := make(map[string]string)
for k, v := range a.Labels {
labels[k] = v
}
labels["__name__"] = alertMetricName
labels[alertStateLabel] = a.State.String()
return newTimeSeries([]float64{1}, []int64{timestamp}, labels)
}
// alertForToTimeSeries returns a timeseries that represents
// state of active alerts, where value is time when alert become active
func alertForToTimeSeries(a *notifier.Alert, timestamp int64) prompbmarshal.TimeSeries {
labels := make(map[string]string)
for k, v := range a.Labels {
labels[k] = v
}
labels["__name__"] = alertForStateMetricName
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
return newTimeSeries([]float64{float64(a.ActiveAt.Unix())}, []int64{timestamp}, labels)
}
// restore restores the value of ActiveAt field for active alerts,
// based on previously written time series `alertForStateMetricName`.
// Only rules with For > 0 can be restored.
func (ar *AlertingRule) restore(ctx context.Context, q datasource.Querier, ts time.Time, lookback time.Duration) error {
if ar.For < 1 {
return nil
}
if len(ar.alerts) < 1 {
return nil
}
nameStr := fmt.Sprintf("%s=%q", alertNameLabel, ar.Name)
if !*disableAlertGroupLabel {
nameStr = fmt.Sprintf("%s=%q,%s=%q", alertGroupNameLabel, ar.GroupName, alertNameLabel, ar.Name)
}
var labelsFilter string
for k, v := range ar.Labels {
labelsFilter += fmt.Sprintf(",%s=%q", k, v)
}
expr := fmt.Sprintf("last_over_time(%s{%s%s}[%ds])",
alertForStateMetricName, nameStr, labelsFilter, int(lookback.Seconds()))
res, _, err := q.Query(ctx, expr, ts)
if err != nil {
return fmt.Errorf("failed to execute restore query %q: %w ", expr, err)
}
if len(res.Data) < 1 {
ar.logDebugf(ts, nil, "no response was received from restore query")
return nil
}
ar.alertsMu.Lock()
defer ar.alertsMu.Unlock()
for _, series := range res.Data {
series.DelLabel("__name__")
labelSet := make(map[string]string, len(series.Labels))
for _, v := range series.Labels {
labelSet[v.Name] = v.Value
}
id := hash(labelSet)
a, ok := ar.alerts[id]
if !ok {
continue
}
if a.Restored || a.State != notifier.StatePending {
continue
}
a.ActiveAt = time.Unix(int64(series.Values[0]), 0)
a.Restored = true
logger.Infof("alert %q (%d) restored to state at %v", a.Name, a.ID, a.ActiveAt)
}
return nil
}
// alertsToSend walks through the current alerts of AlertingRule
// and returns only those which should be sent to notifier.
// Isn't concurrent safe.
func (ar *AlertingRule) alertsToSend(resolveDuration, resendDelay time.Duration) []notifier.Alert {
currentTime := time.Now()
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
needsSending := func(a *notifier.Alert) bool {
if a.State == notifier.StatePending {
return false
}
if a.State == notifier.StateFiring && a.End.Before(a.LastSent) {
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
return true
}
if a.State == notifier.StateInactive && a.ResolvedAt.After(a.LastSent) {
return true
}
return a.LastSent.Add(resendDelay).Before(currentTime)
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
}
var alerts []notifier.Alert
for _, a := range ar.alerts {
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
if !needsSending(a) {
continue
}
a.End = currentTime.Add(resolveDuration)
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
if a.State == notifier.StateInactive {
a.End = a.ResolvedAt
}
a.LastSent = currentTime
Vmalert compliance 2 (#2340) * vmalert: split alert's `Start` field into `ActiveAt` and `Start` The `ActiveAt` field identifies when alert becomes active for rules with `for > 0`. Previously, this value was stored in field `Start`. The field `Start` now identifies the moment alert became `FIRING`. The split is needed in order to distinguish these two moments in the API responses for alerts. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: support specific moment of time for rules evaluation The Querier interface was extended to accept a new argument used as a timestamp at which evaluation should be made. It is needed to align rules execution time within the group. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: mark disappeared series as stale Series generated by alerting rules, which were sent to remote write now will be marked as stale if they will disappear on the next evaluation. This would make ALERTS and ALERTS_FOR_TIME series more precise. Signed-off-by: hagen1778 <roman@victoriametrics.com> * wip Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: evaluate rules at fixed timestamp Before, time at which rules were evaluated was calculated right before rule execution. The change makes sure that timestamp is calculated only once per evalution round and all rules are using the same timestamp. It also updates the logic of resending of already resolved alert notification. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: allow overridin `alertname` label value if it is present in response Previously, `alertname` was always equal to the Alerting Rule name. Now, its value can be overriden if series in response containt the different value for this label. The change is needed for improving compatibility with Prometheus. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: align rules evaluation in time Now, evaluation timestamp for rules evaluates as if there was no delay in rules evaluation. It means, that rules will be evaluated at fixed timestamps+group_interval. This way provides more consistent evaluation results and improves compatibility with Prometheus, Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: add metric for missed iterations New metric `vmalert_iteration_missed_total` will show whether rules evaluation round was missed. Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: reduce delay before the initial rule evaluation in group Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: rollback alertname override According to the spec: ``` The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label. ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: throw err immediately on dedup detection ``` The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts or add samples to samples receiver if there is more than one alert with the same labels ``` https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4 Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: cleanup Signed-off-by: hagen1778 <roman@victoriametrics.com> * vmalert: use strings builder to reduce allocs Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-03-29 13:09:07 +00:00
alerts = append(alerts, *a)
}
return alerts
}