VictoriaMetrics/lib/promscrape/scraper.go

461 lines
17 KiB
Go
Raw Normal View History

package promscrape
import (
"context"
"flag"
"fmt"
"io"
"sync"
"sync/atomic"
"time"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/auth"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/fasttime"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/procutil"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/prompbmarshal"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape/discovery/azure"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape/discovery/consul"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape/discovery/consulagent"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape/discovery/digitalocean"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape/discovery/dns"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape/discovery/docker"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape/discovery/dockerswarm"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape/discovery/ec2"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape/discovery/eureka"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape/discovery/gce"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape/discovery/hetzner"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape/discovery/http"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape/discovery/kubernetes"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape/discovery/kuma"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape/discovery/nomad"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape/discovery/openstack"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape/discovery/yandexcloud"
"github.com/VictoriaMetrics/VictoriaMetrics/lib/promutils"
"github.com/VictoriaMetrics/metrics"
)
var (
lib/promauth: follow-up for e16d3f5639d67ff970975d342aaa276e339e9b0c - Make sure that invalid/missing TLS CA file or TLS client certificate files at vmagent startup don't prevent from processing the corresponding scrape targets after the file becomes correct, without the need to restart vmagent. Previously scrape targets with invalid TLS CA file or TLS client certificate files were permanently dropped after the first attempt to initialize them, and they didn't appear until the next vmagent reload or the next change in other places of the loaded scrape configs. - Make sure that TLS CA is properly re-loaded from file after it changes without the need to restart vmagent. Previously the old TLS CA was used until vmagent restart. - Properly handle errors during http request creation for the second attempt to send data to remote system at vmagent and vmalert. Previously failed request creation could result in nil pointer dereferencing, since the returned request is nil on error. - Add more context to the logged error during AWS sigv4 request signing before sending the data to -remoteWrite.url at vmagent. Previously it could miss details on the source of the request. - Do not create a new HTTP client per second when generating OAuth2 token needed to put in Authorization header of every http request issued by vmagent during service discovery or target scraping. Re-use the HTTP client instead until the corresponding scrape config changes. - Cache error at lib/promauth.Config.GetAuthHeader() in the same way as the auth header is cached, e.g. the error is cached for a second now. This should reduce load on CPU and OAuth2 server when auth header cannot be obtained because of temporary error. - Share tls.Config.GetClientCertificate function among multiple scrape targets with the same tls_config. Cache the loaded certificate and the error for one second. This should significantly reduce CPU load when scraping big number of targets with the same tls_config. - Allow loading TLS certificates from HTTP and HTTPs urls by specifying these urls at `tls_config->cert_file` and `tls_config->key_file`. - Improve test coverage at lib/promauth - Skip unreachable or invalid files specified at `scrape_config_files` during vmagent startup, since these files may become valid later. Previously vmagent was exitting in this case. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959
2023-10-25 21:19:33 +00:00
configCheckInterval = flag.Duration("promscrape.configCheckInterval", 0, "Interval for checking for changes in -promscrape.config file. "+
"By default, the checking is disabled. See how to reload -promscrape.config file at https://docs.victoriametrics.com/vmagent.html#configuration-update")
suppressDuplicateScrapeTargetErrors = flag.Bool("promscrape.suppressDuplicateScrapeTargetErrors", false, "Whether to suppress 'duplicate scrape target' errors; "+
"see https://docs.victoriametrics.com/vmagent.html#troubleshooting for details")
promscrapeConfigFile = flag.String("promscrape.config", "", "Optional path to Prometheus config file with 'scrape_configs' section containing targets to scrape. "+
"The path can point to local file and to http url. "+
"See https://docs.victoriametrics.com/#how-to-scrape-prometheus-exporters-such-as-node-exporter for details")
fileSDCheckInterval = flag.Duration("promscrape.fileSDCheckInterval", time.Minute, "Interval for checking for changes in 'file_sd_config'. "+
"See https://docs.victoriametrics.com/sd_configs.html#file_sd_configs for details")
)
// CheckConfig checks -promscrape.config for errors and unsupported options.
func CheckConfig() error {
if *promscrapeConfigFile == "" {
return nil
}
lib/promauth: follow-up for e16d3f5639d67ff970975d342aaa276e339e9b0c - Make sure that invalid/missing TLS CA file or TLS client certificate files at vmagent startup don't prevent from processing the corresponding scrape targets after the file becomes correct, without the need to restart vmagent. Previously scrape targets with invalid TLS CA file or TLS client certificate files were permanently dropped after the first attempt to initialize them, and they didn't appear until the next vmagent reload or the next change in other places of the loaded scrape configs. - Make sure that TLS CA is properly re-loaded from file after it changes without the need to restart vmagent. Previously the old TLS CA was used until vmagent restart. - Properly handle errors during http request creation for the second attempt to send data to remote system at vmagent and vmalert. Previously failed request creation could result in nil pointer dereferencing, since the returned request is nil on error. - Add more context to the logged error during AWS sigv4 request signing before sending the data to -remoteWrite.url at vmagent. Previously it could miss details on the source of the request. - Do not create a new HTTP client per second when generating OAuth2 token needed to put in Authorization header of every http request issued by vmagent during service discovery or target scraping. Re-use the HTTP client instead until the corresponding scrape config changes. - Cache error at lib/promauth.Config.GetAuthHeader() in the same way as the auth header is cached, e.g. the error is cached for a second now. This should reduce load on CPU and OAuth2 server when auth header cannot be obtained because of temporary error. - Share tls.Config.GetClientCertificate function among multiple scrape targets with the same tls_config. Cache the loaded certificate and the error for one second. This should significantly reduce CPU load when scraping big number of targets with the same tls_config. - Allow loading TLS certificates from HTTP and HTTPs urls by specifying these urls at `tls_config->cert_file` and `tls_config->key_file`. - Improve test coverage at lib/promauth - Skip unreachable or invalid files specified at `scrape_config_files` during vmagent startup, since these files may become valid later. Previously vmagent was exitting in this case. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959
2023-10-25 21:19:33 +00:00
_, err := loadConfig(*promscrapeConfigFile)
return err
}
// Init initializes Prometheus scraper with config from the `-promscrape.config`.
//
// Scraped data is passed to pushData.
app/vmagent: follow-up for 090cb2c9de8d533eaba45a3ebbdb0d2503e97e00 - Add Try* prefix to functions, which return bool result in order to improve readability and reduce the probability of missing check for the result returned from these functions. - Call the adjustSampleValues() only once on input samples. Previously it was called on every attempt to flush data to peristent queue. - Properly restore the initial state of WriteRequest passed to tryPushWriteRequest() before returning from this function after unsuccessful push to persistent queue. Previously a part of WriteRequest samples may be lost in such case. - Add -remoteWrite.dropSamplesOnOverload command-line flag, which can be used for dropping incoming samples instead of returning 429 Too Many Requests error to the client when -remoteWrite.disableOnDiskQueue is set and the remote storage cannot keep up with the data ingestion rate. - Add vmagent_remotewrite_samples_dropped_total metric, which counts the number of dropped samples. - Add vmagent_remotewrite_push_failures_total metric, which counts the number of unsuccessful attempts to push data to persistent queue when -remoteWrite.disableOnDiskQueue is set. - Remove vmagent_remotewrite_aggregation_metrics_dropped_total and vm_promscrape_push_samples_dropped_total metrics, because they are replaced with vmagent_remotewrite_samples_dropped_total metric. - Update 'Disabling on-disk persistence' docs at docs/vmagent.md - Update stale comments in the code Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5088 Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2110
2023-11-25 09:31:30 +00:00
func Init(pushData func(at *auth.Token, wr *prompbmarshal.WriteRequest)) {
mustInitClusterMemberID()
globalStopChan = make(chan struct{})
scraperWG.Add(1)
go func() {
defer scraperWG.Done()
app/vmagent: follow-up for 090cb2c9de8d533eaba45a3ebbdb0d2503e97e00 - Add Try* prefix to functions, which return bool result in order to improve readability and reduce the probability of missing check for the result returned from these functions. - Call the adjustSampleValues() only once on input samples. Previously it was called on every attempt to flush data to peristent queue. - Properly restore the initial state of WriteRequest passed to tryPushWriteRequest() before returning from this function after unsuccessful push to persistent queue. Previously a part of WriteRequest samples may be lost in such case. - Add -remoteWrite.dropSamplesOnOverload command-line flag, which can be used for dropping incoming samples instead of returning 429 Too Many Requests error to the client when -remoteWrite.disableOnDiskQueue is set and the remote storage cannot keep up with the data ingestion rate. - Add vmagent_remotewrite_samples_dropped_total metric, which counts the number of dropped samples. - Add vmagent_remotewrite_push_failures_total metric, which counts the number of unsuccessful attempts to push data to persistent queue when -remoteWrite.disableOnDiskQueue is set. - Remove vmagent_remotewrite_aggregation_metrics_dropped_total and vm_promscrape_push_samples_dropped_total metrics, because they are replaced with vmagent_remotewrite_samples_dropped_total metric. - Update 'Disabling on-disk persistence' docs at docs/vmagent.md - Update stale comments in the code Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5088 Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2110
2023-11-25 09:31:30 +00:00
runScraper(*promscrapeConfigFile, pushData, globalStopChan)
}()
}
// Stop stops Prometheus scraper.
func Stop() {
close(globalStopChan)
scraperWG.Wait()
}
var (
globalStopChan chan struct{}
scraperWG sync.WaitGroup
// PendingScrapeConfigs - zero value means, that
// all scrapeConfigs are inited and ready for work.
PendingScrapeConfigs int32
// configData contains -promscrape.config data
configData atomic.Pointer[[]byte]
)
// WriteConfigData writes -promscrape.config contents to w
func WriteConfigData(w io.Writer) {
p := configData.Load()
if p == nil {
// Nothing to write to w
return
}
_, _ = w.Write(*p)
}
func runScraper(configFile string, pushData func(at *auth.Token, wr *prompbmarshal.WriteRequest), globalStopCh <-chan struct{}) {
if configFile == "" {
// Nothing to scrape.
return
}
metrics.RegisterSet(configMetricsSet)
// Register SIGHUP handler for config reload before loadConfig.
// This guarantees that the config will be re-read if the signal arrives just after loadConfig.
// See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1240
sighupCh := procutil.NewSighupChan()
lib/promauth: follow-up for e16d3f5639d67ff970975d342aaa276e339e9b0c - Make sure that invalid/missing TLS CA file or TLS client certificate files at vmagent startup don't prevent from processing the corresponding scrape targets after the file becomes correct, without the need to restart vmagent. Previously scrape targets with invalid TLS CA file or TLS client certificate files were permanently dropped after the first attempt to initialize them, and they didn't appear until the next vmagent reload or the next change in other places of the loaded scrape configs. - Make sure that TLS CA is properly re-loaded from file after it changes without the need to restart vmagent. Previously the old TLS CA was used until vmagent restart. - Properly handle errors during http request creation for the second attempt to send data to remote system at vmagent and vmalert. Previously failed request creation could result in nil pointer dereferencing, since the returned request is nil on error. - Add more context to the logged error during AWS sigv4 request signing before sending the data to -remoteWrite.url at vmagent. Previously it could miss details on the source of the request. - Do not create a new HTTP client per second when generating OAuth2 token needed to put in Authorization header of every http request issued by vmagent during service discovery or target scraping. Re-use the HTTP client instead until the corresponding scrape config changes. - Cache error at lib/promauth.Config.GetAuthHeader() in the same way as the auth header is cached, e.g. the error is cached for a second now. This should reduce load on CPU and OAuth2 server when auth header cannot be obtained because of temporary error. - Share tls.Config.GetClientCertificate function among multiple scrape targets with the same tls_config. Cache the loaded certificate and the error for one second. This should significantly reduce CPU load when scraping big number of targets with the same tls_config. - Allow loading TLS certificates from HTTP and HTTPs urls by specifying these urls at `tls_config->cert_file` and `tls_config->key_file`. - Improve test coverage at lib/promauth - Skip unreachable or invalid files specified at `scrape_config_files` during vmagent startup, since these files may become valid later. Previously vmagent was exitting in this case. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959
2023-10-25 21:19:33 +00:00
logger.Infof("reading scrape configs from %q", configFile)
cfg, err := loadConfig(configFile)
if err != nil {
logger.Fatalf("cannot read %q: %s", configFile, err)
}
marshaledData := cfg.marshal()
configData.Store(&marshaledData)
cfg.mustStart()
configSuccess.Set(1)
configTimestamp.Set(fasttime.UnixTimestamp())
scs := newScrapeConfigs(pushData, globalStopCh)
scs.add("azure_sd_configs", *azure.SDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getAzureSDScrapeWork(swsPrev) })
scs.add("consul_sd_configs", *consul.SDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getConsulSDScrapeWork(swsPrev) })
scs.add("consulagent_sd_configs", *consulagent.SDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getConsulAgentSDScrapeWork(swsPrev) })
scs.add("digitalocean_sd_configs", *digitalocean.SDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getDigitalOceanDScrapeWork(swsPrev) })
scs.add("dns_sd_configs", *dns.SDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getDNSSDScrapeWork(swsPrev) })
scs.add("docker_sd_configs", *docker.SDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getDockerSDScrapeWork(swsPrev) })
scs.add("dockerswarm_sd_configs", *dockerswarm.SDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getDockerSwarmSDScrapeWork(swsPrev) })
scs.add("ec2_sd_configs", *ec2.SDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getEC2SDScrapeWork(swsPrev) })
scs.add("eureka_sd_configs", *eureka.SDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getEurekaSDScrapeWork(swsPrev) })
scs.add("file_sd_configs", *fileSDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getFileSDScrapeWork(swsPrev) })
scs.add("gce_sd_configs", *gce.SDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getGCESDScrapeWork(swsPrev) })
scs.add("hetzner_sd_configs", *hetzner.SDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getHetznerSDScrapeWork(swsPrev) })
scs.add("http_sd_configs", *http.SDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getHTTPDScrapeWork(swsPrev) })
scs.add("kubernetes_sd_configs", *kubernetes.SDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getKubernetesSDScrapeWork(swsPrev) })
scs.add("kuma_sd_configs", *kuma.SDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getKumaSDScrapeWork(swsPrev) })
scs.add("nomad_sd_configs", *nomad.SDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getNomadSDScrapeWork(swsPrev) })
scs.add("openstack_sd_configs", *openstack.SDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getOpenStackSDScrapeWork(swsPrev) })
scs.add("yandexcloud_sd_configs", *yandexcloud.SDCheckInterval, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getYandexCloudSDScrapeWork(swsPrev) })
scs.add("static_configs", 0, func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork { return cfg.getStaticScrapeWork() })
var tickerCh <-chan time.Time
if *configCheckInterval > 0 {
ticker := time.NewTicker(*configCheckInterval)
tickerCh = ticker.C
defer ticker.Stop()
}
for {
scs.updateConfig(cfg)
waitForChans:
select {
case <-sighupCh:
logger.Infof("SIGHUP received; reloading Prometheus configs from %q", configFile)
lib/promauth: follow-up for e16d3f5639d67ff970975d342aaa276e339e9b0c - Make sure that invalid/missing TLS CA file or TLS client certificate files at vmagent startup don't prevent from processing the corresponding scrape targets after the file becomes correct, without the need to restart vmagent. Previously scrape targets with invalid TLS CA file or TLS client certificate files were permanently dropped after the first attempt to initialize them, and they didn't appear until the next vmagent reload or the next change in other places of the loaded scrape configs. - Make sure that TLS CA is properly re-loaded from file after it changes without the need to restart vmagent. Previously the old TLS CA was used until vmagent restart. - Properly handle errors during http request creation for the second attempt to send data to remote system at vmagent and vmalert. Previously failed request creation could result in nil pointer dereferencing, since the returned request is nil on error. - Add more context to the logged error during AWS sigv4 request signing before sending the data to -remoteWrite.url at vmagent. Previously it could miss details on the source of the request. - Do not create a new HTTP client per second when generating OAuth2 token needed to put in Authorization header of every http request issued by vmagent during service discovery or target scraping. Re-use the HTTP client instead until the corresponding scrape config changes. - Cache error at lib/promauth.Config.GetAuthHeader() in the same way as the auth header is cached, e.g. the error is cached for a second now. This should reduce load on CPU and OAuth2 server when auth header cannot be obtained because of temporary error. - Share tls.Config.GetClientCertificate function among multiple scrape targets with the same tls_config. Cache the loaded certificate and the error for one second. This should significantly reduce CPU load when scraping big number of targets with the same tls_config. - Allow loading TLS certificates from HTTP and HTTPs urls by specifying these urls at `tls_config->cert_file` and `tls_config->key_file`. - Improve test coverage at lib/promauth - Skip unreachable or invalid files specified at `scrape_config_files` during vmagent startup, since these files may become valid later. Previously vmagent was exitting in this case. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959
2023-10-25 21:19:33 +00:00
cfgNew, err := loadConfig(configFile)
if err != nil {
configReloadErrors.Inc()
configSuccess.Set(0)
logger.Errorf("cannot read %q on SIGHUP: %s; continuing with the previous config", configFile, err)
goto waitForChans
}
lib/promauth: follow-up for e16d3f5639d67ff970975d342aaa276e339e9b0c - Make sure that invalid/missing TLS CA file or TLS client certificate files at vmagent startup don't prevent from processing the corresponding scrape targets after the file becomes correct, without the need to restart vmagent. Previously scrape targets with invalid TLS CA file or TLS client certificate files were permanently dropped after the first attempt to initialize them, and they didn't appear until the next vmagent reload or the next change in other places of the loaded scrape configs. - Make sure that TLS CA is properly re-loaded from file after it changes without the need to restart vmagent. Previously the old TLS CA was used until vmagent restart. - Properly handle errors during http request creation for the second attempt to send data to remote system at vmagent and vmalert. Previously failed request creation could result in nil pointer dereferencing, since the returned request is nil on error. - Add more context to the logged error during AWS sigv4 request signing before sending the data to -remoteWrite.url at vmagent. Previously it could miss details on the source of the request. - Do not create a new HTTP client per second when generating OAuth2 token needed to put in Authorization header of every http request issued by vmagent during service discovery or target scraping. Re-use the HTTP client instead until the corresponding scrape config changes. - Cache error at lib/promauth.Config.GetAuthHeader() in the same way as the auth header is cached, e.g. the error is cached for a second now. This should reduce load on CPU and OAuth2 server when auth header cannot be obtained because of temporary error. - Share tls.Config.GetClientCertificate function among multiple scrape targets with the same tls_config. Cache the loaded certificate and the error for one second. This should significantly reduce CPU load when scraping big number of targets with the same tls_config. - Allow loading TLS certificates from HTTP and HTTPs urls by specifying these urls at `tls_config->cert_file` and `tls_config->key_file`. - Improve test coverage at lib/promauth - Skip unreachable or invalid files specified at `scrape_config_files` during vmagent startup, since these files may become valid later. Previously vmagent was exitting in this case. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959
2023-10-25 21:19:33 +00:00
configSuccess.Set(1)
if !cfgNew.mustRestart(cfg) {
logger.Infof("nothing changed in %q", configFile)
goto waitForChans
}
cfg = cfgNew
lib/promauth: follow-up for e16d3f5639d67ff970975d342aaa276e339e9b0c - Make sure that invalid/missing TLS CA file or TLS client certificate files at vmagent startup don't prevent from processing the corresponding scrape targets after the file becomes correct, without the need to restart vmagent. Previously scrape targets with invalid TLS CA file or TLS client certificate files were permanently dropped after the first attempt to initialize them, and they didn't appear until the next vmagent reload or the next change in other places of the loaded scrape configs. - Make sure that TLS CA is properly re-loaded from file after it changes without the need to restart vmagent. Previously the old TLS CA was used until vmagent restart. - Properly handle errors during http request creation for the second attempt to send data to remote system at vmagent and vmalert. Previously failed request creation could result in nil pointer dereferencing, since the returned request is nil on error. - Add more context to the logged error during AWS sigv4 request signing before sending the data to -remoteWrite.url at vmagent. Previously it could miss details on the source of the request. - Do not create a new HTTP client per second when generating OAuth2 token needed to put in Authorization header of every http request issued by vmagent during service discovery or target scraping. Re-use the HTTP client instead until the corresponding scrape config changes. - Cache error at lib/promauth.Config.GetAuthHeader() in the same way as the auth header is cached, e.g. the error is cached for a second now. This should reduce load on CPU and OAuth2 server when auth header cannot be obtained because of temporary error. - Share tls.Config.GetClientCertificate function among multiple scrape targets with the same tls_config. Cache the loaded certificate and the error for one second. This should significantly reduce CPU load when scraping big number of targets with the same tls_config. - Allow loading TLS certificates from HTTP and HTTPs urls by specifying these urls at `tls_config->cert_file` and `tls_config->key_file`. - Improve test coverage at lib/promauth - Skip unreachable or invalid files specified at `scrape_config_files` during vmagent startup, since these files may become valid later. Previously vmagent was exitting in this case. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959
2023-10-25 21:19:33 +00:00
marshaledData = cfg.marshal()
configData.Store(&marshaledData)
lib/promauth: follow-up for e16d3f5639d67ff970975d342aaa276e339e9b0c - Make sure that invalid/missing TLS CA file or TLS client certificate files at vmagent startup don't prevent from processing the corresponding scrape targets after the file becomes correct, without the need to restart vmagent. Previously scrape targets with invalid TLS CA file or TLS client certificate files were permanently dropped after the first attempt to initialize them, and they didn't appear until the next vmagent reload or the next change in other places of the loaded scrape configs. - Make sure that TLS CA is properly re-loaded from file after it changes without the need to restart vmagent. Previously the old TLS CA was used until vmagent restart. - Properly handle errors during http request creation for the second attempt to send data to remote system at vmagent and vmalert. Previously failed request creation could result in nil pointer dereferencing, since the returned request is nil on error. - Add more context to the logged error during AWS sigv4 request signing before sending the data to -remoteWrite.url at vmagent. Previously it could miss details on the source of the request. - Do not create a new HTTP client per second when generating OAuth2 token needed to put in Authorization header of every http request issued by vmagent during service discovery or target scraping. Re-use the HTTP client instead until the corresponding scrape config changes. - Cache error at lib/promauth.Config.GetAuthHeader() in the same way as the auth header is cached, e.g. the error is cached for a second now. This should reduce load on CPU and OAuth2 server when auth header cannot be obtained because of temporary error. - Share tls.Config.GetClientCertificate function among multiple scrape targets with the same tls_config. Cache the loaded certificate and the error for one second. This should significantly reduce CPU load when scraping big number of targets with the same tls_config. - Allow loading TLS certificates from HTTP and HTTPs urls by specifying these urls at `tls_config->cert_file` and `tls_config->key_file`. - Improve test coverage at lib/promauth - Skip unreachable or invalid files specified at `scrape_config_files` during vmagent startup, since these files may become valid later. Previously vmagent was exitting in this case. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959
2023-10-25 21:19:33 +00:00
configReloads.Inc()
configTimestamp.Set(fasttime.UnixTimestamp())
case <-tickerCh:
lib/promauth: follow-up for e16d3f5639d67ff970975d342aaa276e339e9b0c - Make sure that invalid/missing TLS CA file or TLS client certificate files at vmagent startup don't prevent from processing the corresponding scrape targets after the file becomes correct, without the need to restart vmagent. Previously scrape targets with invalid TLS CA file or TLS client certificate files were permanently dropped after the first attempt to initialize them, and they didn't appear until the next vmagent reload or the next change in other places of the loaded scrape configs. - Make sure that TLS CA is properly re-loaded from file after it changes without the need to restart vmagent. Previously the old TLS CA was used until vmagent restart. - Properly handle errors during http request creation for the second attempt to send data to remote system at vmagent and vmalert. Previously failed request creation could result in nil pointer dereferencing, since the returned request is nil on error. - Add more context to the logged error during AWS sigv4 request signing before sending the data to -remoteWrite.url at vmagent. Previously it could miss details on the source of the request. - Do not create a new HTTP client per second when generating OAuth2 token needed to put in Authorization header of every http request issued by vmagent during service discovery or target scraping. Re-use the HTTP client instead until the corresponding scrape config changes. - Cache error at lib/promauth.Config.GetAuthHeader() in the same way as the auth header is cached, e.g. the error is cached for a second now. This should reduce load on CPU and OAuth2 server when auth header cannot be obtained because of temporary error. - Share tls.Config.GetClientCertificate function among multiple scrape targets with the same tls_config. Cache the loaded certificate and the error for one second. This should significantly reduce CPU load when scraping big number of targets with the same tls_config. - Allow loading TLS certificates from HTTP and HTTPs urls by specifying these urls at `tls_config->cert_file` and `tls_config->key_file`. - Improve test coverage at lib/promauth - Skip unreachable or invalid files specified at `scrape_config_files` during vmagent startup, since these files may become valid later. Previously vmagent was exitting in this case. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959
2023-10-25 21:19:33 +00:00
cfgNew, err := loadConfig(configFile)
if err != nil {
configReloadErrors.Inc()
configSuccess.Set(0)
logger.Errorf("cannot read %q: %s; continuing with the previous config", configFile, err)
goto waitForChans
}
lib/promauth: follow-up for e16d3f5639d67ff970975d342aaa276e339e9b0c - Make sure that invalid/missing TLS CA file or TLS client certificate files at vmagent startup don't prevent from processing the corresponding scrape targets after the file becomes correct, without the need to restart vmagent. Previously scrape targets with invalid TLS CA file or TLS client certificate files were permanently dropped after the first attempt to initialize them, and they didn't appear until the next vmagent reload or the next change in other places of the loaded scrape configs. - Make sure that TLS CA is properly re-loaded from file after it changes without the need to restart vmagent. Previously the old TLS CA was used until vmagent restart. - Properly handle errors during http request creation for the second attempt to send data to remote system at vmagent and vmalert. Previously failed request creation could result in nil pointer dereferencing, since the returned request is nil on error. - Add more context to the logged error during AWS sigv4 request signing before sending the data to -remoteWrite.url at vmagent. Previously it could miss details on the source of the request. - Do not create a new HTTP client per second when generating OAuth2 token needed to put in Authorization header of every http request issued by vmagent during service discovery or target scraping. Re-use the HTTP client instead until the corresponding scrape config changes. - Cache error at lib/promauth.Config.GetAuthHeader() in the same way as the auth header is cached, e.g. the error is cached for a second now. This should reduce load on CPU and OAuth2 server when auth header cannot be obtained because of temporary error. - Share tls.Config.GetClientCertificate function among multiple scrape targets with the same tls_config. Cache the loaded certificate and the error for one second. This should significantly reduce CPU load when scraping big number of targets with the same tls_config. - Allow loading TLS certificates from HTTP and HTTPs urls by specifying these urls at `tls_config->cert_file` and `tls_config->key_file`. - Improve test coverage at lib/promauth - Skip unreachable or invalid files specified at `scrape_config_files` during vmagent startup, since these files may become valid later. Previously vmagent was exitting in this case. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959
2023-10-25 21:19:33 +00:00
configSuccess.Set(1)
if !cfgNew.mustRestart(cfg) {
goto waitForChans
}
cfg = cfgNew
lib/promauth: follow-up for e16d3f5639d67ff970975d342aaa276e339e9b0c - Make sure that invalid/missing TLS CA file or TLS client certificate files at vmagent startup don't prevent from processing the corresponding scrape targets after the file becomes correct, without the need to restart vmagent. Previously scrape targets with invalid TLS CA file or TLS client certificate files were permanently dropped after the first attempt to initialize them, and they didn't appear until the next vmagent reload or the next change in other places of the loaded scrape configs. - Make sure that TLS CA is properly re-loaded from file after it changes without the need to restart vmagent. Previously the old TLS CA was used until vmagent restart. - Properly handle errors during http request creation for the second attempt to send data to remote system at vmagent and vmalert. Previously failed request creation could result in nil pointer dereferencing, since the returned request is nil on error. - Add more context to the logged error during AWS sigv4 request signing before sending the data to -remoteWrite.url at vmagent. Previously it could miss details on the source of the request. - Do not create a new HTTP client per second when generating OAuth2 token needed to put in Authorization header of every http request issued by vmagent during service discovery or target scraping. Re-use the HTTP client instead until the corresponding scrape config changes. - Cache error at lib/promauth.Config.GetAuthHeader() in the same way as the auth header is cached, e.g. the error is cached for a second now. This should reduce load on CPU and OAuth2 server when auth header cannot be obtained because of temporary error. - Share tls.Config.GetClientCertificate function among multiple scrape targets with the same tls_config. Cache the loaded certificate and the error for one second. This should significantly reduce CPU load when scraping big number of targets with the same tls_config. - Allow loading TLS certificates from HTTP and HTTPs urls by specifying these urls at `tls_config->cert_file` and `tls_config->key_file`. - Improve test coverage at lib/promauth - Skip unreachable or invalid files specified at `scrape_config_files` during vmagent startup, since these files may become valid later. Previously vmagent was exitting in this case. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959
2023-10-25 21:19:33 +00:00
marshaledData = cfg.marshal()
configData.Store(&marshaledData)
lib/promauth: follow-up for e16d3f5639d67ff970975d342aaa276e339e9b0c - Make sure that invalid/missing TLS CA file or TLS client certificate files at vmagent startup don't prevent from processing the corresponding scrape targets after the file becomes correct, without the need to restart vmagent. Previously scrape targets with invalid TLS CA file or TLS client certificate files were permanently dropped after the first attempt to initialize them, and they didn't appear until the next vmagent reload or the next change in other places of the loaded scrape configs. - Make sure that TLS CA is properly re-loaded from file after it changes without the need to restart vmagent. Previously the old TLS CA was used until vmagent restart. - Properly handle errors during http request creation for the second attempt to send data to remote system at vmagent and vmalert. Previously failed request creation could result in nil pointer dereferencing, since the returned request is nil on error. - Add more context to the logged error during AWS sigv4 request signing before sending the data to -remoteWrite.url at vmagent. Previously it could miss details on the source of the request. - Do not create a new HTTP client per second when generating OAuth2 token needed to put in Authorization header of every http request issued by vmagent during service discovery or target scraping. Re-use the HTTP client instead until the corresponding scrape config changes. - Cache error at lib/promauth.Config.GetAuthHeader() in the same way as the auth header is cached, e.g. the error is cached for a second now. This should reduce load on CPU and OAuth2 server when auth header cannot be obtained because of temporary error. - Share tls.Config.GetClientCertificate function among multiple scrape targets with the same tls_config. Cache the loaded certificate and the error for one second. This should significantly reduce CPU load when scraping big number of targets with the same tls_config. - Allow loading TLS certificates from HTTP and HTTPs urls by specifying these urls at `tls_config->cert_file` and `tls_config->key_file`. - Improve test coverage at lib/promauth - Skip unreachable or invalid files specified at `scrape_config_files` during vmagent startup, since these files may become valid later. Previously vmagent was exitting in this case. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959
2023-10-25 21:19:33 +00:00
configReloads.Inc()
configTimestamp.Set(fasttime.UnixTimestamp())
case <-globalStopCh:
cfg.mustStop()
logger.Infof("stopping Prometheus scrapers")
startTime := time.Now()
scs.stop()
logger.Infof("stopped Prometheus scrapers in %.3f seconds", time.Since(startTime).Seconds())
return
}
}
}
var (
configMetricsSet = metrics.NewSet()
configReloads = configMetricsSet.NewCounter(`vm_promscrape_config_reloads_total`)
configReloadErrors = configMetricsSet.NewCounter(`vm_promscrape_config_reloads_errors_total`)
configSuccess = configMetricsSet.NewGauge(`vm_promscrape_config_last_reload_successful`, nil)
configTimestamp = configMetricsSet.NewCounter(`vm_promscrape_config_last_reload_success_timestamp_seconds`)
)
type scrapeConfigs struct {
pushData func(at *auth.Token, wr *prompbmarshal.WriteRequest)
wg sync.WaitGroup
stopCh chan struct{}
globalStopCh <-chan struct{}
scfgs []*scrapeConfig
}
func newScrapeConfigs(pushData func(at *auth.Token, wr *prompbmarshal.WriteRequest), globalStopCh <-chan struct{}) *scrapeConfigs {
return &scrapeConfigs{
pushData: pushData,
stopCh: make(chan struct{}),
globalStopCh: globalStopCh,
}
}
func (scs *scrapeConfigs) add(name string, checkInterval time.Duration, getScrapeWork func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork) {
atomic.AddInt32(&PendingScrapeConfigs, 1)
scfg := &scrapeConfig{
name: name,
pushData: scs.pushData,
getScrapeWork: getScrapeWork,
checkInterval: checkInterval,
cfgCh: make(chan *Config, 1),
stopCh: scs.stopCh,
discoveryDuration: metrics.GetOrCreateHistogram(fmt.Sprintf("vm_promscrape_service_discovery_duration_seconds{type=%q}", name)),
}
scs.wg.Add(1)
go func() {
defer scs.wg.Done()
scfg.run(scs.globalStopCh)
}()
scs.scfgs = append(scs.scfgs, scfg)
}
func (scs *scrapeConfigs) updateConfig(cfg *Config) {
for _, scfg := range scs.scfgs {
scfg.cfgCh <- cfg
}
}
func (scs *scrapeConfigs) stop() {
close(scs.stopCh)
scs.wg.Wait()
scs.scfgs = nil
}
type scrapeConfig struct {
name string
pushData func(at *auth.Token, wr *prompbmarshal.WriteRequest)
getScrapeWork func(cfg *Config, swsPrev []*ScrapeWork) []*ScrapeWork
checkInterval time.Duration
cfgCh chan *Config
stopCh <-chan struct{}
discoveryDuration *metrics.Histogram
}
func (scfg *scrapeConfig) run(globalStopCh <-chan struct{}) {
sg := newScraperGroup(scfg.name, scfg.pushData, globalStopCh)
defer sg.stop()
var tickerCh <-chan time.Time
if scfg.checkInterval > 0 {
ticker := time.NewTicker(scfg.checkInterval)
defer ticker.Stop()
tickerCh = ticker.C
}
cfg := <-scfg.cfgCh
var swsPrev []*ScrapeWork
updateScrapeWork := func(cfg *Config) {
startTime := time.Now()
sws := scfg.getScrapeWork(cfg, swsPrev)
sg.update(sws)
swsPrev = sws
if sg.scrapersStarted.Get() > 0 {
// update duration only if at least one scraper has started
// otherwise this SD is considered as inactive
scfg.discoveryDuration.UpdateDuration(startTime)
}
}
updateScrapeWork(cfg)
atomic.AddInt32(&PendingScrapeConfigs, -1)
for {
select {
case <-scfg.stopCh:
return
case cfg = <-scfg.cfgCh:
case <-tickerCh:
}
updateScrapeWork(cfg)
}
}
type scraperGroup struct {
name string
wg sync.WaitGroup
mLock sync.Mutex
m map[string]*scraper
pushData func(at *auth.Token, wr *prompbmarshal.WriteRequest)
changesCount *metrics.Counter
activeScrapers *metrics.Counter
scrapersStarted *metrics.Counter
scrapersStopped *metrics.Counter
globalStopCh <-chan struct{}
}
func newScraperGroup(name string, pushData func(at *auth.Token, wr *prompbmarshal.WriteRequest), globalStopCh <-chan struct{}) *scraperGroup {
sg := &scraperGroup{
name: name,
m: make(map[string]*scraper),
pushData: pushData,
changesCount: metrics.NewCounter(fmt.Sprintf(`vm_promscrape_config_changes_total{type=%q}`, name)),
activeScrapers: metrics.NewCounter(fmt.Sprintf(`vm_promscrape_active_scrapers{type=%q}`, name)),
scrapersStarted: metrics.NewCounter(fmt.Sprintf(`vm_promscrape_scrapers_started_total{type=%q}`, name)),
scrapersStopped: metrics.NewCounter(fmt.Sprintf(`vm_promscrape_scrapers_stopped_total{type=%q}`, name)),
globalStopCh: globalStopCh,
}
metrics.NewGauge(fmt.Sprintf(`vm_promscrape_targets{type=%q, status="up"}`, name), func() float64 {
return float64(tsmGlobal.StatusByGroup(sg.name, true))
})
metrics.NewGauge(fmt.Sprintf(`vm_promscrape_targets{type=%q, status="down"}`, name), func() float64 {
return float64(tsmGlobal.StatusByGroup(sg.name, false))
})
return sg
}
func (sg *scraperGroup) stop() {
sg.mLock.Lock()
for _, sc := range sg.m {
sc.cancel()
}
sg.m = nil
sg.mLock.Unlock()
sg.wg.Wait()
}
func (sg *scraperGroup) update(sws []*ScrapeWork) {
sg.mLock.Lock()
defer sg.mLock.Unlock()
additionsCount := 0
deletionsCount := 0
swsMap := make(map[string]*promutils.Labels, len(sws))
var swsToStart []*ScrapeWork
for _, sw := range sws {
key := sw.key()
originalLabels, ok := swsMap[key]
if ok {
if !*suppressDuplicateScrapeTargetErrors {
logger.Errorf("skipping duplicate scrape target with identical labels; endpoint=%s, labels=%s; "+
"make sure service discovery and relabeling is set up properly; "+
"see also https://docs.victoriametrics.com/vmagent.html#troubleshooting; "+
"original labels for target1: %s; original labels for target2: %s",
sw.ScrapeURL, sw.Labels.String(), originalLabels.String(), sw.OriginalLabels.String())
}
droppedTargetsMap.Register(sw.OriginalLabels, sw.RelabelConfigs, targetDropReasonDuplicate, nil)
continue
}
swsMap[key] = sw.OriginalLabels
if sg.m[key] != nil {
// The scraper for the given key already exists.
continue
}
swsToStart = append(swsToStart, sw)
}
// Stop deleted scrapers before starting new scrapers in order to prevent
// series overlap when old scrape target is substituted by new scrape target.
var stoppedChs []<-chan struct{}
for key, sc := range sg.m {
if _, ok := swsMap[key]; !ok {
sc.cancel()
stoppedChs = append(stoppedChs, sc.stoppedCh)
delete(sg.m, key)
deletionsCount++
}
}
// Wait until all the deleted scrapers are stopped before starting new scrapers.
for _, ch := range stoppedChs {
<-ch
}
// Start new scrapers only after the deleted scrapers are stopped.
for _, sw := range swsToStart {
sc, err := newScraper(sw, sg.name, sg.pushData)
if err != nil {
lib/promauth: follow-up for e16d3f5639d67ff970975d342aaa276e339e9b0c - Make sure that invalid/missing TLS CA file or TLS client certificate files at vmagent startup don't prevent from processing the corresponding scrape targets after the file becomes correct, without the need to restart vmagent. Previously scrape targets with invalid TLS CA file or TLS client certificate files were permanently dropped after the first attempt to initialize them, and they didn't appear until the next vmagent reload or the next change in other places of the loaded scrape configs. - Make sure that TLS CA is properly re-loaded from file after it changes without the need to restart vmagent. Previously the old TLS CA was used until vmagent restart. - Properly handle errors during http request creation for the second attempt to send data to remote system at vmagent and vmalert. Previously failed request creation could result in nil pointer dereferencing, since the returned request is nil on error. - Add more context to the logged error during AWS sigv4 request signing before sending the data to -remoteWrite.url at vmagent. Previously it could miss details on the source of the request. - Do not create a new HTTP client per second when generating OAuth2 token needed to put in Authorization header of every http request issued by vmagent during service discovery or target scraping. Re-use the HTTP client instead until the corresponding scrape config changes. - Cache error at lib/promauth.Config.GetAuthHeader() in the same way as the auth header is cached, e.g. the error is cached for a second now. This should reduce load on CPU and OAuth2 server when auth header cannot be obtained because of temporary error. - Share tls.Config.GetClientCertificate function among multiple scrape targets with the same tls_config. Cache the loaded certificate and the error for one second. This should significantly reduce CPU load when scraping big number of targets with the same tls_config. - Allow loading TLS certificates from HTTP and HTTPs urls by specifying these urls at `tls_config->cert_file` and `tls_config->key_file`. - Improve test coverage at lib/promauth - Skip unreachable or invalid files specified at `scrape_config_files` during vmagent startup, since these files may become valid later. Previously vmagent was exitting in this case. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959
2023-10-25 21:19:33 +00:00
logger.Errorf("skipping scraper for url=%s, job=%s because of error: %s", sw.ScrapeURL, sg.name, err)
continue
}
sg.activeScrapers.Inc()
sg.scrapersStarted.Inc()
sg.wg.Add(1)
tsmGlobal.Register(&sc.sw)
go func() {
defer func() {
sg.wg.Done()
close(sc.stoppedCh)
}()
sc.sw.run(sc.ctx.Done(), sg.globalStopCh)
tsmGlobal.Unregister(&sc.sw)
sg.activeScrapers.Dec()
sg.scrapersStopped.Inc()
}()
key := sw.key()
sg.m[key] = sc
additionsCount++
}
if additionsCount > 0 || deletionsCount > 0 {
sg.changesCount.Add(additionsCount + deletionsCount)
logger.Infof("%s: added targets: %d, removed targets: %d; total targets: %d", sg.name, additionsCount, deletionsCount, len(sg.m))
}
}
type scraper struct {
sw scrapeWork
ctx context.Context
cancel context.CancelFunc
// stoppedCh is unblocked when the given scraper is stopped.
stoppedCh chan struct{}
}
func newScraper(sw *ScrapeWork, group string, pushData func(at *auth.Token, wr *prompbmarshal.WriteRequest)) (*scraper, error) {
ctx, cancel := context.WithCancel(context.Background())
sc := &scraper{
ctx: ctx,
cancel: cancel,
stoppedCh: make(chan struct{}),
}
c, err := newClient(ctx, sw)
if err != nil {
lib/promauth: follow-up for e16d3f5639d67ff970975d342aaa276e339e9b0c - Make sure that invalid/missing TLS CA file or TLS client certificate files at vmagent startup don't prevent from processing the corresponding scrape targets after the file becomes correct, without the need to restart vmagent. Previously scrape targets with invalid TLS CA file or TLS client certificate files were permanently dropped after the first attempt to initialize them, and they didn't appear until the next vmagent reload or the next change in other places of the loaded scrape configs. - Make sure that TLS CA is properly re-loaded from file after it changes without the need to restart vmagent. Previously the old TLS CA was used until vmagent restart. - Properly handle errors during http request creation for the second attempt to send data to remote system at vmagent and vmalert. Previously failed request creation could result in nil pointer dereferencing, since the returned request is nil on error. - Add more context to the logged error during AWS sigv4 request signing before sending the data to -remoteWrite.url at vmagent. Previously it could miss details on the source of the request. - Do not create a new HTTP client per second when generating OAuth2 token needed to put in Authorization header of every http request issued by vmagent during service discovery or target scraping. Re-use the HTTP client instead until the corresponding scrape config changes. - Cache error at lib/promauth.Config.GetAuthHeader() in the same way as the auth header is cached, e.g. the error is cached for a second now. This should reduce load on CPU and OAuth2 server when auth header cannot be obtained because of temporary error. - Share tls.Config.GetClientCertificate function among multiple scrape targets with the same tls_config. Cache the loaded certificate and the error for one second. This should significantly reduce CPU load when scraping big number of targets with the same tls_config. - Allow loading TLS certificates from HTTP and HTTPs urls by specifying these urls at `tls_config->cert_file` and `tls_config->key_file`. - Improve test coverage at lib/promauth - Skip unreachable or invalid files specified at `scrape_config_files` during vmagent startup, since these files may become valid later. Previously vmagent was exitting in this case. Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959
2023-10-25 21:19:33 +00:00
return nil, err
}
sc.sw.Config = sw
sc.sw.ScrapeGroup = group
sc.sw.ReadData = c.ReadData
sc.sw.PushData = pushData
return sc, nil
}