`vmbackup` creates VictoriaMetrics data backups from [instant snapshots](https://docs.victoriametrics.com/Single-server-VictoriaMetrics.html#how-to-work-with-snapshots).
`vmbackup` supports incremental and full backups. Incremental backups are created automatically if the destination path already contains data from the previous backup.
Full backups can be sped up with `-origin` pointing to an already existing backup on the same remote storage. In this case `vmbackup` makes server-side copy for the shared
* Any S3-compatible storage such as [MinIO](https://github.com/minio/minio), [Ceph](https://docs.ceph.com/en/pacific/radosgw/s3/) or [Swift](https://platform.swiftstack.com/docs/admin/middleware/s3_middleware.html). See [these docs](#advanced-usage) for details.
* Local filesystem. Example: `fs://</absolute/path/to/backup>`. Note that `vmbackup` prevents from storing the backup into the directory pointed by `-storageDataPath` command-line flag, since this directory should be managed solely by VictoriaMetrics or `vmstorage`.
*`</path/to/victoria-metrics-data>` - path to VictoriaMetrics data pointed by `-storageDataPath` command-line flag in single-node VictoriaMetrics or in cluster `vmstorage`.
There is no need to stop VictoriaMetrics for creating backups since they are performed from immutable [instant snapshots](https://docs.victoriametrics.com/Single-server-VictoriaMetrics.html#how-to-work-with-snapshots).
*`http://victoriametrics:8428/snapshot/create` is the url for creating snapshots according to [these docs](https://docs.victoriametrics.com/Single-server-VictoriaMetrics.html#how-to-work-with-snapshots). `vmbackup` creates a snapshot by querying the provided `-snapshot.createURL`, then performs the backup and then automatically removes the created snapshot.
This approach saves network bandwidth costs on hourly backups (since they are incremental) and allows recovering data from either the last hour (`latest` backup)
1. Create a snapshot by querying the provided `-snapshot.createURL`
2. Collect information about files in the created snapshot, in the `-dst` and in the `-origin`.
3. Determine which files in `-dst` are missing in the created snapshot, and delete them. These are usually small files, which are already merged into bigger files in the snapshot.
4. Determine which files in the created snapshot are missing in `-dst`. These are usually small new files and bigger merged files.
5. Determine which files from step 3 exist in the `-origin`, and perform server-side copy of these files from `-origin` to `-dst`.
* If the backup is slow, then try setting higher value for `-concurrency` flag. This will increase the number of concurrent workers that upload data to backup storage.
- For AWS S3 compatible storages set env variable `AWS_ACCESS_KEY_ID` and `AWS_SECRET_ACCESS_KEY`.
Also you can set env variable `AWS_SHARED_CREDENTIALS_FILE` with path to credentials file.
- For GCE cloud storage set env variable `GOOGLE_APPLICATION_CREDENTIALS` with path to credentials file.
- For Azure storage either set env variables `AZURE_STORAGE_ACCOUNT_NAME` and `AZURE_STORAGE_ACCOUNT_KEY`, or `AZURE_STORAGE_ACCOUNT_CONNECTION_STRING`.
Profile name for S3 configs. If no set, the value of the environment variable will be loaded (AWS_PROFILE or AWS_DEFAULT_PROFILE), or if both not set, DefaultSharedConfigProfile is used
Path to file with GCS or S3 credentials. Credentials are loaded from default locations if not set.
See https://cloud.google.com/iam/docs/creating-managing-service-account-keys and https://docs.aws.amazon.com/general/latest/gr/aws-security-credentials.html
Where to put the backup on the remote storage. Example: gs://bucket/path/to/backup, s3://bucket/path/to/backup, azblob://container/path/to/backup or fs:///path/to/local/backup/dir
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
By specifying this flag, you confirm that you have an enterprise license and accept the EULA https://victoriametrics.com/assets/VM_EULA.pdf . This flag is available only in VictoriaMetrics enterprise. See https://docs.victoriametrics.com/enterprise.html
Whether to use pread() instead of mmap() for reading data files. By default, mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
The maximum duration for a graceful shutdown of the HTTP server. A highly loaded server may require increased value for a graceful shutdown (default 7s)
An optional prefix to add to all the paths handled by http server. For example, if '-http.pathPrefix=/foo/bar' is set, then all the http requests will be handled on '/foo/bar/*' paths. This may be useful for proxied requests. See https://www.robustperception.io/using-external-urls-and-proxies-with-prometheus
Optional delay before http server shutdown. During this delay, the server returns non-OK responses from /health page, so load balancers can route new requests to other servers
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabel='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default, metrics exposed at /metrics page aren't pushed to any remote storage
VictoriaMetrics create snapshot url. When this is given a snapshot will automatically be created during backup. Example: http://victoriametrics:8428/snapshot/create . There is no need in setting -snapshotName if -snapshot.createURL is set
VictoriaMetrics delete snapshot url. Optional. Will be generated from -snapshot.createURL if not provided. All created snapshots will be automatically deleted. Example: http://victoriametrics:8428/snapshot/delete
Name for the snapshot to backup. See https://docs.victoriametrics.com/Single-server-VictoriaMetrics.html#how-to-work-with-snapshots. There is no need in setting -snapshotName if -snapshot.createURL is set
Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
-tlsCipherSuites array
Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
Supports an array of values separated by comma or specified via multiple flags.
by setting it via `<ROOT_IMAGE>` environment variable. For example, the following command builds the image on top of [scratch](https://hub.docker.com/_/scratch) image:
