Merge branch 'public-single-node' into pmm-6401-read-prometheus-data-files

2024-12-01 14:47:38 +00:00 · 2022-07-21 20:23:41 +03:00 · 2022-07-21 20:23:41 +03:00 · 274145af2d
commit 274145af2d
parent ffe9bd248c c444f7e2b9
69 changed files with 1404 additions and 223 deletions
--- a/2
+++ b/2
@ -389,7 +389,7 @@ golangci-lint: install-golangci-lint
 	golangci-lint run --exclude '(SA4003|SA1019|SA5011):' -D errcheck -D structcheck --timeout 2m

 install-golangci-lint:
-	which golangci-lint || curl -sSfL https://raw.githubusercontent.com/golangci/golangci-lint/master/install.sh | sh -s -- -b $(shell go env GOPATH)/bin v1.46.2
+	which golangci-lint || curl -sSfL https://raw.githubusercontent.com/golangci/golangci-lint/master/install.sh | sh -s -- -b $(shell go env GOPATH)/bin v1.47.1

 install-wwhrd:
 	which wwhrd || GO111MODULE=off go get github.com/frapposelli/wwhrd
--- a/README.md
+++ b/README.md
@ -248,7 +248,7 @@ It is also safe downgrading to older versions unless [release notes](https://git

 The following steps must be performed during the upgrade / downgrade procedure:

-* Send `SIGINT` signal to VictoriaMetrics process in order to gracefully stop it.
+* Send `SIGINT` signal to VictoriaMetrics process in order to gracefully stop it. See [how to send signals to processes](https://stackoverflow.com/questions/33239959/send-signal-to-process-from-command-line).
 * Wait until the process stops. This can take a few seconds.
 * Start the upgraded VictoriaMetrics.

@ -411,7 +411,7 @@ and stream plain InfluxDB line protocol data to the configured TCP and/or UDP ad
 VictoriaMetrics performs the following transformations to the ingested InfluxDB data:

 * [db query arg](https://docs.influxdata.com/influxdb/v1.7/tools/api/#write-http-endpoint) is mapped into `db` label value
-  unless `db` tag exists in the InfluxDB line. The `db` label name can be overriden via `-influxDBLabel` command-line flag.
+  unless `db` tag exists in the InfluxDB line. The `db` label name can be overridden via `-influxDBLabel` command-line flag.
 * Field names are mapped to time series names prefixed with `{measurement}{separator}` value, where `{separator}` equals to `_` by default. It can be changed with `-influxMeasurementFieldSeparator` command-line flag. See also `-influxSkipSingleField` command-line flag. If `{measurement}` is empty or if `-influxSkipMeasurement` command-line flag is set, then time series names correspond to field names.
 * Field values are mapped to time series values.
 * Tags are mapped to Prometheus labels as-is.
@ -704,7 +704,7 @@ VictoriaMetrics supports the following handlers from [Graphite Metrics API](http
 VictoriaMetrics accepts the following additional query args at `/metrics/find` and `/metrics/expand`:

 * `label` - for selecting arbitrary label values. By default `label=__name__`, i.e. metric names are selected.
-* `delimiter` - for using different delimiters in metric name hierachy. For example, `/metrics/find?delimiter=_&query=node_*` would return all the metric name prefixes
+* `delimiter` - for using different delimiters in metric name hierarchy. For example, `/metrics/find?delimiter=_&query=node_*` would return all the metric name prefixes
    that start with `node_`. By default `delimiter=.`.

 ### Graphite Tags API usage
@ -823,6 +823,7 @@ Send a request to `http://<victoriametrics-addr>:8428/api/v1/admin/tsdb/delete_s
 where `<timeseries_selector_for_delete>` may contain any [time series selector](https://prometheus.io/docs/prometheus/latest/querying/basics/#time-series-selectors)
 for metrics to delete. After that all the time series matching the given selector are deleted. Storage space for
 the deleted time series isn't freed instantly - it is freed during subsequent [background merges of data files](https://medium.com/@valyala/how-victoriametrics-makes-instant-snapshots-for-multi-terabyte-time-series-data-e1f3fb0e0282).
+
 Note that background merges may never occur for data from previous months, so storage space won't be freed for historical data.
 In this case [forced merge](#forced-merge) may help freeing up storage space.

@ -845,6 +846,8 @@ Using the delete API is not recommended in the following cases, since it brings
 * Reducing disk space usage by deleting unneeded time series. This doesn't work as expected, since the deleted
  time series occupy disk space until the next merge operation, which can never occur when deleting too old data.
  [Forced merge](#forced-merge) may be used for freeing up disk space occupied by old data.
+  Note that VictoriaMetrics doesn't delete entries from inverted index (aka `indexdb`) for the deleted time series.
+  Inverted index is cleaned up once per the configured [retention](#retention).

 It's better to use the `-retentionPeriod` command-line flag for efficient pruning of old data.

@ -1136,7 +1139,7 @@ Extra labels may be added to all the imported metrics by passing `extra_label=na
 For example, `/api/v1/import/prometheus?extra_label=foo=bar` would add `{foo="bar"}` label to all the imported metrics.

 If timestamp is missing in `<metric> <value> <timestamp>` Prometheus exposition format line, then the current timestamp is used during data ingestion.
-It can be overriden by passing unix timestamp in *milliseconds* via `timestamp` query arg. For example, `/api/v1/import/prometheus?timestamp=1594370496905`.
+It can be overridden by passing unix timestamp in *milliseconds* via `timestamp` query arg. For example, `/api/v1/import/prometheus?timestamp=1594370496905`.

 VictoriaMetrics accepts arbitrary number of lines in a single request to `/api/v1/import/prometheus`, i.e. it supports data streaming.

@ -1629,6 +1632,20 @@ See also more advanced [cardinality limiter in vmagent](https://docs.victoriamet

 See also [troubleshooting docs](https://docs.victoriametrics.com/Troubleshooting.html).

+## Push metrics
+
+All the VictoriaMetrics apps support pushing their metrics exposed at `/metrics` page to remote storage in Prometheus text exposition format. This can be done by specifying the following command-line flags:
+
+* `-pushmetrics.url` - the url to push metrics to. For example, `-pushmetrics.url=http://victoria-metrics:8428/api/v1/import/prometheus` instructs to push internal metrics to `/api/v1/import/prometheus` endpoint according to [these docs](#how-to-import-data-in-prometheus-exposition-format). The `-pushmetrics.url` can be specified multiple times. In this case metrics are pushed to all the specified urls. The url can contain basic auth params in the form http://user:pass@hostname/api/v1/import/prometheus .
+* `-pushmetrics.interval` - the interval between pushes. By default it is set to 10 seconds.
+* `-pushmetrics.extraLabel` - label to add to all the metrics before sending them to `-pushmetrics.url`. The label must be specified in the format `label="value"`. It is OK to specify multiple `-pushmetrics.extraLabel` command-line flags. In this case all the specified labels are added to all the metrics sending them to `-pushmetrics.url`.
+
+For example, the following command instructs VictoriaMetrics to push metrics from `/metrics` page to `https://maas.victoriametrics.com/api/v1/import/prometheus` with `user:pass` [Basic auth](https://en.wikipedia.org/wiki/Basic_access_authentication). The `instance="foobar"` and `job="vm"` labels are added to all the metrics before sending them to the remote storage:
+
+```console
+/path/to/victoria-metrics -pushmetrics.url=https://user:pass@maas.victoriametrics.com/api/v1/import/prometheus -pushmetrics.extraLabel='instance="foobar",job="vm"'
+```
+
 ## Cache removal

 VictoriaMetrics uses various internal caches. These caches are stored to `<-storageDataPath>/cache` directory during graceful shutdown (e.g. when VictoriaMetrics is stopped by sending `SIGINT` signal). The caches are read on the next VictoriaMetrics startup. Sometimes it is needed to remove such caches on the next startup. This can be performed by placing `reset_cache_on_startup` file inside the `<-storageDataPath>/cache` directory before the restart of VictoriaMetrics. See [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1447) for details.
@ -1745,7 +1762,7 @@ For accessing vmalert's UI through single-node VictoriaMetrics configure `-vmale

 Note, that vendors (including VictoriaMetrics) are often biased when doing such tests. E.g. they try highlighting
 the best parts of their product, while highlighting the worst parts of competing products.
-So we encourage users and all independent third parties to conduct their becnhmarks for various products
+So we encourage users and all independent third parties to conduct their benchmarks for various products
 they are evaluating in production and publish the results.

 As a reference, please see [benchmarks](https://docs.victoriametrics.com/Articles.html#benchmarks) conducted by
@ -2083,6 +2100,14 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
     Whether to suppress scrape errors logging. The last error for each target is always available at '/targets' page even if scrape errors logging is suppressed. See also -promscrape.suppressScrapeErrorsDelay
  -promscrape.suppressScrapeErrorsDelay duration
     The delay for suppressing repeated scrape errors logging per each scrape targets. This may be used for reducing the number of log lines related to scrape errors. See also -promscrape.suppressScrapeErrors
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -relabelConfig string
     Optional path to a file with relabeling rules, which are applied to all the ingested metrics. The path can point either to local file or to http url. See https://docs.victoriametrics.com/#relabeling for details. The config is reloaded on SIGHUP signal
  -relabelDebug
@ -2101,7 +2126,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
  -search.graphiteMaxPointsPerSeries int
     The maximum number of points per series Graphite render API can return (default 1000000)
  -search.graphiteStorageStep duration
-     The interval between datapoints stored in the database. It is used at Graphite Render API handler for normalizing the interval between datapoints in case it isn't normalized. It can be overriden by sending 'storage_step' query arg to /render API or by sending the desired interval via 'Storage-Step' http header during querying /render API (default 10s)
+     The interval between datapoints stored in the database. It is used at Graphite Render API handler for normalizing the interval between datapoints in case it isn't normalized. It can be overridden by sending 'storage_step' query arg to /render API or by sending the desired interval via 'Storage-Step' http header during querying /render API (default 10s)
  -search.latencyOffset duration
     The time when data points become visible in query results after the collection. Too small value can result in incomplete last points for query results (default 30s)
  -search.logSlowQueryDuration duration
--- a/app/victoria-metrics/main.go
+++ b/app/victoria-metrics/main.go
@ -19,6 +19,7 @@ import (
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/procutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/pushmetrics"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/storage"
 )

@ -43,6 +44,7 @@ func main() {
 	flag.CommandLine.SetOutput(os.Stdout)
 	flag.Usage = usage
 	envflag.Parse()
+	pushmetrics.Init()
 	buildinfo.Init()
 	logger.Init()

--- a/app/victoria-metrics/self_scraper.go
+++ b/app/victoria-metrics/self_scraper.go
@ -6,8 +6,8 @@ import (
 	"time"

 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vmstorage"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/appmetrics"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/bytesutil"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/prompb"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/protoparser/prometheus"
@ -60,7 +60,7 @@ func selfScraper(scrapeInterval time.Duration) {
 			currentTimestamp = currentTime.UnixNano() / 1e6
 		}
 		bb.Reset()
-		httpserver.WritePrometheusMetrics(&bb)
+		appmetrics.WritePrometheusMetrics(&bb)
 		s := bytesutil.ToUnsafeString(bb.B)
 		rows.Reset()
 		rows.Unmarshal(s)
--- a/app/vmagent/README.md
+++ b/app/vmagent/README.md
@ -122,7 +122,7 @@ Please see [these docs](#relabeling) for details.

 ### Splitting data streams among multiple systems

-`vmagent` supports splitting the collected data between muliple destinations with the help of `-remoteWrite.urlRelabelConfig`,
+`vmagent` supports splitting the collected data between multiple destinations with the help of `-remoteWrite.urlRelabelConfig`,
 which is applied independently for each configured `-remoteWrite.url` destination. For example, it is possible to replicate or split
 data among long-term remote storage, short-term remote storage and a real-time analytical system [built on top of Kafka](https://github.com/Telefonica/prometheus-kafka-adapter).
 Note that each destination can receive it's own subset of the collected data due to per-destination relabeling via `-remoteWrite.urlRelabelConfig`.
@ -136,7 +136,7 @@ Also, Basic Auth can be enabled for the incoming `remote_write` requests with `-

 ### remote_write for clustered version

-While `vmagent` can accept data in several supported protocols (OpenTSDB, Influx, Prometheus, Graphite) and scrape data from various targets, writes are always peformed in Promethes remote_write protocol. Therefore for the [clustered version](https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html), `-remoteWrite.url` the command-line flag should be configured as `<schema>://<vminsert-host>:8480/insert/<accountID>/prometheus/api/v1/write` according to [these docs](https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#url-format). There is also support for multitenant writes. See [these docs](#multitenancy).
+While `vmagent` can accept data in several supported protocols (OpenTSDB, Influx, Prometheus, Graphite) and scrape data from various targets, writes are always performed in Promethes remote_write protocol. Therefore for the [clustered version](https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html), `-remoteWrite.url` the command-line flag should be configured as `<schema>://<vminsert-host>:8480/insert/<accountID>/prometheus/api/v1/write` according to [these docs](https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#url-format). There is also support for multitenant writes. See [these docs](#multitenancy).

 ## Multitenancy

@ -332,7 +332,7 @@ The following articles contain useful information about Prometheus relabeling:

 VictoriaMetrics provides the following additional relabeling actions on top of standard actions from the [Prometheus relabeling](https://prometheus.io/docs/prometheus/latest/configuration/configuration/#relabel_config):

-* `replace_all` replaces all of the occurences of `regex` in the values of `source_labels` with the `replacement` and stores the results in the `target_label`. For example, the following relabeling config replaces all the occurences of `-` char in metric names with `_` char (e.g. `foo-bar-baz` metric name is transformed into `foo_bar_baz`):
+* `replace_all` replaces all of the occurrences of `regex` in the values of `source_labels` with the `replacement` and stores the results in the `target_label`. For example, the following relabeling config replaces all the occurrences of `-` char in metric names with `_` char (e.g. `foo-bar-baz` metric name is transformed into `foo_bar_baz`):

  ```yaml
  - action: replace_all
@ -342,7 +342,7 @@ VictoriaMetrics provides the following additional relabeling actions on top of s
    replacement: "_"
  ```

-* `labelmap_all` replaces all of the occurences of `regex` in all the label names with the `replacement`. For example, the following relabeling config replaces all the occurences of `-` char in all the label names with `_` char (e.g. `foo-bar-baz` label name is transformed into `foo_bar_baz`):
+* `labelmap_all` replaces all of the occurrences of `regex` in all the label names with the `replacement`. For example, the following relabeling config replaces all the occurrences of `-` char in all the label names with `_` char (e.g. `foo-bar-baz` label name is transformed into `foo_bar_baz`):

  ```yaml
  - action: labelmap_all
@ -1079,6 +1079,14 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
     Whether to suppress scrape errors logging. The last error for each target is always available at '/targets' page even if scrape errors logging is suppressed. See also -promscrape.suppressScrapeErrorsDelay
  -promscrape.suppressScrapeErrorsDelay duration
     The delay for suppressing repeated scrape errors logging per each scrape targets. This may be used for reducing the number of log lines related to scrape errors. See also -promscrape.suppressScrapeErrors
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -remoteWrite.aws.accessKey array
     Optional AWS AccessKey to use for the corresponding -remoteWrite.url if -remoteWrite.aws.useSigv4 is set
     Supports an array of values separated by comma or specified via multiple flags.
--- a/app/vmagent/main.go
+++ b/app/vmagent/main.go
@ -37,6 +37,7 @@ import (
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/procutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/protoparser/common"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/pushmetrics"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/writeconcurrencylimiter"
 	"github.com/VictoriaMetrics/metrics"
 )
@ -76,6 +77,7 @@ func main() {
 	flag.CommandLine.SetOutput(os.Stdout)
 	flag.Usage = usage
 	envflag.Parse()
+	pushmetrics.Init()
 	remotewrite.InitSecretFlags()
 	buildinfo.Init()
 	logger.Init()
--- a/app/vmagent/remotewrite/client.go
+++ b/app/vmagent/remotewrite/client.go
@ -154,6 +154,9 @@ func (c *client) init(argIdx, concurrency int, sanitizedURL string) {
 	c.packetsDropped = metrics.GetOrCreateCounter(fmt.Sprintf(`vmagent_remotewrite_packets_dropped_total{url=%q}`, c.sanitizedURL))
 	c.retriesCount = metrics.GetOrCreateCounter(fmt.Sprintf(`vmagent_remotewrite_retries_count_total{url=%q}`, c.sanitizedURL))
 	c.sendDuration = metrics.GetOrCreateFloatCounter(fmt.Sprintf(`vmagent_remotewrite_send_duration_seconds_total{url=%q}`, c.sanitizedURL))
+	metrics.GetOrCreateGauge(fmt.Sprintf(`vmagent_remotewrite_queues{url=%q}`, c.sanitizedURL), func() float64 {
+		return float64(*queues)
+	})
 	for i := 0; i < concurrency; i++ {
 		c.wg.Add(1)
 		go func() {
--- a/app/vmalert/README.md
+++ b/app/vmalert/README.md
@ -787,6 +787,14 @@ The shortlist of configuration flags is the following:
     The maximum duration for waiting to perform API requests if more than -promscrape.discovery.concurrency requests are simultaneously performed (default 1m0s)
  -promscrape.dnsSDCheckInterval duration
     Interval for checking for changes in dns. This works only if dns_sd_configs is configured in '-promscrape.config' file. See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#dns_sd_config for details (default 30s)
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -remoteRead.basicAuth.password string
     Optional basic auth password for -remoteRead.url
  -remoteRead.basicAuth.passwordFile string
--- a/app/vmalert/group_test.go
+++ b/app/vmalert/group_test.go
@ -148,7 +148,7 @@ func TestUpdateWith(t *testing.T) {
 					t.Fatalf("expected to have rule %q; got %q", want, got)
 				}
 				if err := compareRules(t, got, want); err != nil {
-					t.Fatalf("comparsion error: %s", err)
+					t.Fatalf("comparison error: %s", err)
 				}
 			}
 		})
--- a/app/vmalert/helpers_test.go
+++ b/app/vmalert/helpers_test.go
@ -164,7 +164,7 @@ func compareGroups(t *testing.T, a, b *Group) {
 			t.Fatalf("expected to have rule %q; got %q", want.ID(), got.ID())
 		}
 		if err := compareRules(t, want, got); err != nil {
-			t.Fatalf("comparsion error: %s", err)
+			t.Fatalf("comparison error: %s", err)
 		}
 	}
 }
--- a/app/vmalert/main.go
+++ b/app/vmalert/main.go
@ -23,6 +23,7 @@ import (
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/procutil"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/pushmetrics"
 	"github.com/VictoriaMetrics/metrics"
 )

@ -79,6 +80,7 @@ func main() {
 	flag.CommandLine.SetOutput(os.Stdout)
 	flag.Usage = usage
 	envflag.Parse()
+	pushmetrics.Init()
 	buildinfo.Init()
 	logger.Init()
 	err := templates.Load(*ruleTemplatesPath, true)
--- a/app/vmalert/main_test.go
+++ b/app/vmalert/main_test.go
@ -47,7 +47,7 @@ func TestGetAlertURLGenerator(t *testing.T) {
 	}
 	_, err = getAlertURLGenerator(nil, "foo?{{invalid}}", true)
 	if err == nil {
-		t.Errorf("expected tempalte validation error got nil")
+		t.Errorf("expected template validation error got nil")
 	}
 	fn, err = getAlertURLGenerator(u, "foo?query={{$value}}", true)
 	if err != nil {
--- a/app/vmalert/manager_test.go
+++ b/app/vmalert/manager_test.go
@ -30,7 +30,7 @@ func TestManagerEmptyRulesDir(t *testing.T) {
 	m := &manager{groups: make(map[uint64]*Group)}
 	cfg := loadCfg(t, []string{"foo/bar"}, true, true)
 	if err := m.update(context.Background(), cfg, false); err != nil {
-		t.Fatalf("expected to load succesfully with empty rules dir; got err instead: %v", err)
+		t.Fatalf("expected to load successfully with empty rules dir; got err instead: %v", err)
 	}
 }

--- a/app/vmalert/templates/template_test.go
+++ b/app/vmalert/templates/template_test.go
@ -185,7 +185,7 @@ func TestTemplates_Load(t *testing.T) {
 			}
 			if tc.expErr != "" && err == nil {
 				t.Error("%+w", err)
-				t.Error("expected error that didn't happend")
+				t.Error("expected error that didn't happened")
 			}
 			if err != nil && !strings.Contains(err.Error(), tc.expErr) {
 				t.Error("%+w", err)
--- a/app/vmauth/README.md
+++ b/app/vmauth/README.md
@ -36,7 +36,8 @@ Each `url_prefix` in the [-auth.config](#auth-config) may contain either a singl

 ```yml
 # Arbitrary number of usernames may be put here.
-# Username and bearer_token values must be unique.
+# It is possible to set multiple identical usernames with different passwords.
+# Such usernames can be differentiated by `name` option.

 users:
  # Requests with the 'Authorization: Bearer XXXX' and 'Authorization: Token XXXX'
@ -287,6 +288,14 @@ See the docs at https://docs.victoriametrics.com/vmauth.html .
     Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
  -pprofAuthKey string
     Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -reloadAuthKey string
     Auth key for /-/reload http endpoint. It must be passed as authKey=...
  -tls
--- a/app/vmauth/auth_config.go
+++ b/app/vmauth/auth_config.go
@ -260,8 +260,6 @@ func parseAuthConfig(data []byte) (map[string]*UserInfo, error) {
 		return nil, fmt.Errorf("`users` section cannot be empty in AuthConfig")
 	}
 	byAuthToken := make(map[string]*UserInfo, len(uis))
-	byUsername := make(map[string]bool, len(uis))
-	byBearerToken := make(map[string]bool, len(uis))
 	for i := range uis {
 		ui := &uis[i]
 		if ui.BearerToken == "" && ui.Username == "" {
@ -270,12 +268,6 @@ func parseAuthConfig(data []byte) (map[string]*UserInfo, error) {
 		if ui.BearerToken != "" && ui.Username != "" {
 			return nil, fmt.Errorf("bearer_token=%q and username=%q cannot be set simultaneously", ui.BearerToken, ui.Username)
 		}
-		if byBearerToken[ui.BearerToken] {
-			return nil, fmt.Errorf("duplicate bearer_token found; bearer_token: %q", ui.BearerToken)
-		}
-		if byUsername[ui.Username] {
-			return nil, fmt.Errorf("duplicate username found; username: %q", ui.Username)
-		}
 		at1, at2 := getAuthTokens(ui.BearerToken, ui.Username, ui.Password)
 		if byAuthToken[at1] != nil {
 			return nil, fmt.Errorf("duplicate auth token found for bearer_token=%q, username=%q: %q", ui.BearerToken, ui.Username, at1)
@ -311,7 +303,6 @@ func parseAuthConfig(data []byte) (map[string]*UserInfo, error) {
 				return nil, fmt.Errorf("password shouldn't be set for bearer_token %q", ui.BearerToken)
 			}
 			ui.requests = metrics.GetOrCreateCounter(fmt.Sprintf(`vmauth_user_requests_total{username=%q}`, name))
-			byBearerToken[ui.BearerToken] = true
 		}
 		if ui.Username != "" {
 			name := ui.Username
@ -319,7 +310,6 @@ func parseAuthConfig(data []byte) (map[string]*UserInfo, error) {
 				name = ui.Name
 			}
 			ui.requests = metrics.GetOrCreateCounter(fmt.Sprintf(`vmauth_user_requests_total{username=%q}`, name))
-			byUsername[ui.Username] = true
 		}
 		byAuthToken[at1] = ui
 		byAuthToken[at2] = ui
--- a/app/vmauth/auth_config_test.go
+++ b/app/vmauth/auth_config_test.go
@ -110,6 +110,18 @@ users:
 - username: foo
  url_prefix: https://sss.sss
 `)
+	// Duplicate users
+	f(`
+users:
+- username: foo
+  password: bar
+  url_prefix: http://foo.bar
+- username: bar
+  url_prefix: http://xxx.yyy
+- username: foo
+  password: bar
+  url_prefix: https://sss.sss
+`)

 	// Duplicate bearer_tokens
 	f(`
@ -317,6 +329,28 @@ users:
 			},
 		},
 	})
+	// Multiple users with the same name
+	f(`
+users:
+- username: foo-same
+  password: baz
+  url_prefix: http://foo
+- username: foo-same
+  password: bar
+  url_prefix: https://bar/x///
+`, map[string]*UserInfo{
+		getAuthToken("", "foo-same", "baz"): {
+			Username:  "foo-same",
+			Password:  "baz",
+			URLPrefix: mustParseURL("http://foo"),
+		},
+		getAuthToken("", "foo-same", "bar"): {
+			Username:  "foo-same",
+			Password:  "bar",
+			URLPrefix: mustParseURL("https://bar/x"),
+		},
+	})
+
 }

 func getSrcPaths(paths []string) []*SrcPath {
--- a/app/vmauth/example_config.yml
+++ b/app/vmauth/example_config.yml
@ -1,5 +1,6 @@
 # Arbitrary number of usernames may be put here.
-# Username and bearer_token values must be unique.
+# It is possible to set multiple identical usernames with different passwords.
+# Such usernames can be differentiated by `name` option.

 users:
  # Requests with the 'Authorization: Bearer XXXX' and 'Authorization: Token XXXX'
--- a/app/vmauth/main.go
+++ b/app/vmauth/main.go
@ -17,6 +17,7 @@ import (
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/procutil"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/pushmetrics"
 	"github.com/VictoriaMetrics/metrics"
 )

@ -33,6 +34,7 @@ func main() {
 	flag.CommandLine.SetOutput(os.Stdout)
 	flag.Usage = usage
 	envflag.Parse()
+	pushmetrics.Init()
 	buildinfo.Init()
 	logger.Init()
 	logger.Infof("starting vmauth at %q...", *httpListenAddr)
--- a/app/vmbackup/README.md
+++ b/app/vmbackup/README.md
@ -239,6 +239,14 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
     Optional origin directory on the remote storage with old backup for server-side copying when performing full backup. This speeds up full backups
  -pprofAuthKey string
     Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -s3ForcePathStyle
     Prefixing endpoint with bucket name when set false, true by default. (default true)
  -snapshot.createURL string
--- a/app/vmbackup/main.go
+++ b/app/vmbackup/main.go
@ -17,6 +17,7 @@ import (
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/flagutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/pushmetrics"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/snapshot"
 )

@ -41,6 +42,7 @@ func main() {
 	flag.CommandLine.SetOutput(os.Stdout)
 	flag.Usage = usage
 	envflag.Parse()
+	pushmetrics.Init()
 	buildinfo.Init()
 	logger.Init()

--- a/app/vmbackupmanager/README.md
+++ b/app/vmbackupmanager/README.md
@ -238,6 +238,14 @@ vmbackupmanager performs regular backups according to the provided configs.
     Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
  -pprofAuthKey string
     Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -runOnStart
     Upload backups immediately after start of the service. Otherwise the backup starts on new hour
  -s3ForcePathStyle
--- a/app/vmgateway/README.md
+++ b/app/vmgateway/README.md
@ -281,6 +281,14 @@ The shortlist of configuration flags include the following:
     Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
  -pprofAuthKey string
     Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -ratelimit.config string
     path for configuration file. Accepts url address
  -ratelimit.configCheckInterval duration
--- a/app/vmrestore/README.md
+++ b/app/vmrestore/README.md
@ -141,6 +141,14 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
     Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
  -pprofAuthKey string
     Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -s3ForcePathStyle
     Prefixing endpoint with bucket name when set false, true by default. (default true)
  -skipBackupCompleteCheck
--- a/app/vmrestore/main.go
+++ b/app/vmrestore/main.go
@ -14,6 +14,7 @@ import (
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/flagutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/pushmetrics"
 )

 var (
@ -33,6 +34,7 @@ func main() {
 	flag.CommandLine.SetOutput(os.Stdout)
 	flag.Usage = usage
 	envflag.Parse()
+	pushmetrics.Init()
 	buildinfo.Init()
 	logger.Init()

--- a/app/vmselect/promql/binary_op.go
+++ b/app/vmselect/promql/binary_op.go
@ -36,9 +36,9 @@ var binaryOpFuncs = map[string]binaryOpFunc{
 	"unless": binaryOpUnless,

 	// New ops
-	"if":      newBinaryOpArithFunc(binaryop.If),
-	"ifnot":   newBinaryOpArithFunc(binaryop.Ifnot),
-	"default": newBinaryOpArithFunc(binaryop.Default),
+	"if":      binaryOpIf,
+	"ifnot":   binaryOpIfnot,
+	"default": binaryOpDefault,
 }

 func getBinaryOpFunc(op string) binaryOpFunc {
@ -86,17 +86,6 @@ func newBinaryOpFunc(bf func(left, right float64, isBool bool) float64) binaryOp
 		right := bfa.right
 		op := bfa.be.Op
 		switch true {
-		case op == "ifnot":
-			left = removeEmptySeries(left)
-			// Do not remove empty series on the right side,
-			// so the left-side series could be matched against them.
-		case op == "default":
-			// Do not remove empty series on the left and the right side,
-			// since this may lead to missing result:
-			// - if empty time series are removed on the left side,
-			// then they won't be substituted by time series from the right side.
-			// - if empty time series are removed on the right side,
-			// then this may result in missing time series from the left side.
 		case metricsql.IsBinaryOpCmp(op):
 			// Do not remove empty series for comparison operations,
 			// since this may lead to missing result.
@ -136,7 +125,7 @@ func newBinaryOpFunc(bf func(left, right float64, isBool bool) float64) binaryOp

 func adjustBinaryOpTags(be *metricsql.BinaryOpExpr, left, right []*timeseries) ([]*timeseries, []*timeseries, []*timeseries, error) {
 	if len(be.GroupModifier.Op) == 0 && len(be.JoinModifier.Op) == 0 {
-		if isScalar(left) && be.Op != "default" && be.Op != "if" && be.Op != "ifnot" {
+		if isScalar(left) {
 			// Fast path: `scalar op vector`
 			rvsLeft := make([]*timeseries, len(right))
 			tsLeft := left[0]
@ -324,14 +313,23 @@ func resetMetricGroupIfRequired(be *metricsql.BinaryOpExpr, ts *timeseries) {
 		// Do not reset MetricGroup for non-boolean `compare` binary ops like Prometheus does.
 		return
 	}
-	switch be.Op {
-	case "default", "if", "ifnot":
-		// Do not reset MetricGroup for these ops.
-		return
-	}
 	ts.MetricName.ResetMetricGroup()
 }

+func binaryOpIf(bfa *binaryOpFuncArg) ([]*timeseries, error) {
+	mLeft, mRight := createTimeseriesMapByTagSet(bfa.be, bfa.left, bfa.right)
+	var rvs []*timeseries
+	for k, tssLeft := range mLeft {
+		tssRight := seriesByKey(mRight, k)
+		if tssRight == nil {
+			continue
+		}
+		tssLeft = addRightNaNsToLeft(tssLeft, tssRight)
+		rvs = append(rvs, tssLeft...)
+	}
+	return rvs, nil
+}
+
 func binaryOpAnd(bfa *binaryOpFuncArg) ([]*timeseries, error) {
 	mLeft, mRight := createTimeseriesMapByTagSet(bfa.be, bfa.left, bfa.right)
 	var rvs []*timeseries
@ -340,7 +338,13 @@ func binaryOpAnd(bfa *binaryOpFuncArg) ([]*timeseries, error) {
 		if tssLeft == nil {
 			continue
 		}
-		// Add gaps to tssLeft if there are gaps at tssRight.
+		tssLeft = addRightNaNsToLeft(tssLeft, tssRight)
+		rvs = append(rvs, tssLeft...)
+	}
+	return rvs, nil
+}
+
+func addRightNaNsToLeft(tssLeft, tssRight []*timeseries) []*timeseries {
 	for _, tsLeft := range tssLeft {
 		valuesLeft := tsLeft.Values
 		for i := range valuesLeft {
@ -356,8 +360,25 @@ func binaryOpAnd(bfa *binaryOpFuncArg) ([]*timeseries, error) {
 			}
 		}
 	}
-		tssLeft = removeEmptySeries(tssLeft)
+	return removeEmptySeries(tssLeft)
+}
+
+func binaryOpDefault(bfa *binaryOpFuncArg) ([]*timeseries, error) {
+	mLeft, mRight := createTimeseriesMapByTagSet(bfa.be, bfa.left, bfa.right)
+	var rvs []*timeseries
+	if len(mLeft) == 0 {
+		for _, tss := range mRight {
+			rvs = append(rvs, tss...)
+		}
+		return rvs, nil
+	}
+	for k, tssLeft := range mLeft {
 		rvs = append(rvs, tssLeft...)
+		tssRight := seriesByKey(mRight, k)
+		if tssRight == nil {
+			continue
+		}
+		fillLeftNaNsWithRightValues(tssLeft, tssRight)
 	}
 	return rvs, nil
 }
@ -374,6 +395,12 @@ func binaryOpOr(bfa *binaryOpFuncArg) ([]*timeseries, error) {
 			rvs = append(rvs, tssRight...)
 			continue
 		}
+		fillLeftNaNsWithRightValues(tssLeft, tssRight)
+	}
+	return rvs, nil
+}
+
+func fillLeftNaNsWithRightValues(tssLeft, tssRight []*timeseries) {
 	// Fill gaps in tssLeft with values from tssRight as Prometheus does.
 	// See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/552
 	for _, tsLeft := range tssLeft {
@ -392,6 +419,19 @@ func binaryOpOr(bfa *binaryOpFuncArg) ([]*timeseries, error) {
 		}
 	}
 }
+
+func binaryOpIfnot(bfa *binaryOpFuncArg) ([]*timeseries, error) {
+	mLeft, mRight := createTimeseriesMapByTagSet(bfa.be, bfa.left, bfa.right)
+	var rvs []*timeseries
+	for k, tssLeft := range mLeft {
+		tssRight := seriesByKey(mRight, k)
+		if tssRight == nil {
+			rvs = append(rvs, tssLeft...)
+			continue
+		}
+		tssLeft = addLeftNaNsIfNoRightNaNs(tssLeft, tssRight)
+		rvs = append(rvs, tssLeft...)
+	}
 	return rvs, nil
 }

@ -404,7 +444,13 @@ func binaryOpUnless(bfa *binaryOpFuncArg) ([]*timeseries, error) {
 			rvs = append(rvs, tssLeft...)
 			continue
 		}
-		// Add gaps to tssLeft if the are no gaps at tssRight.
+		tssLeft = addLeftNaNsIfNoRightNaNs(tssLeft, tssRight)
+		rvs = append(rvs, tssLeft...)
+	}
+	return rvs, nil
+}
+
+func addLeftNaNsIfNoRightNaNs(tssLeft, tssRight []*timeseries) []*timeseries {
 	for _, tsLeft := range tssLeft {
 		valuesLeft := tsLeft.Values
 		for i := range valuesLeft {
@ -416,10 +462,24 @@ func binaryOpUnless(bfa *binaryOpFuncArg) ([]*timeseries, error) {
 			}
 		}
 	}
-		tssLeft = removeEmptySeries(tssLeft)
-		rvs = append(rvs, tssLeft...)
+	return removeEmptySeries(tssLeft)
 }
-	return rvs, nil
+
+func seriesByKey(m map[string][]*timeseries, key string) []*timeseries {
+	tss := m[key]
+	if tss != nil {
+		return tss
+	}
+	if len(m) != 1 {
+		return nil
+	}
+	for _, tss := range m {
+		if isScalar(tss) {
+			return tss
+		}
+		return nil
+	}
+	return nil
 }

 func createTimeseriesMapByTagSet(be *metricsql.BinaryOpExpr, left, right []*timeseries) (map[string][]*timeseries, map[string][]*timeseries) {
--- a/app/vmselect/promql/eval.go
+++ b/app/vmselect/promql/eval.go
@ -382,7 +382,64 @@ func evalBinaryOp(qt *querytracer.Tracer, ec *EvalConfig, be *metricsql.BinaryOp
 	return rv, nil
 }

+func canPushdownCommonFilters(be *metricsql.BinaryOpExpr) bool {
+	switch strings.ToLower(be.Op) {
+	case "or", "default":
+		return false
+	}
+	if isAggrFuncWithoutGrouping(be.Left) || isAggrFuncWithoutGrouping(be.Right) {
+		return false
+	}
+	return true
+}
+
+func isAggrFuncWithoutGrouping(e metricsql.Expr) bool {
+	afe, ok := e.(*metricsql.AggrFuncExpr)
+	if !ok {
+		return false
+	}
+	return len(afe.Modifier.Args) == 0
+}
+
 func execBinaryOpArgs(qt *querytracer.Tracer, ec *EvalConfig, exprFirst, exprSecond metricsql.Expr, be *metricsql.BinaryOpExpr) ([]*timeseries, []*timeseries, error) {
+	if !canPushdownCommonFilters(be) {
+		// Execute exprFirst and exprSecond in parallel, since it is impossible to pushdown common filters
+		// from exprFirst to exprSecond.
+		// See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2886
+		qt = qt.NewChild("execute left and right sides of %q in parallel", be.Op)
+		defer qt.Done()
+		var wg sync.WaitGroup
+
+		var tssFirst []*timeseries
+		var errFirst error
+		qtFirst := qt.NewChild("expr1")
+		wg.Add(1)
+		go func() {
+			defer wg.Done()
+			tssFirst, errFirst = evalExpr(qtFirst, ec, exprFirst)
+			qtFirst.Done()
+		}()
+
+		var tssSecond []*timeseries
+		var errSecond error
+		qtSecond := qt.NewChild("expr2")
+		wg.Add(1)
+		go func() {
+			defer wg.Done()
+			tssSecond, errSecond = evalExpr(qtSecond, ec, exprSecond)
+			qtSecond.Done()
+		}()
+
+		wg.Wait()
+		if errFirst != nil {
+			return nil, nil, errFirst
+		}
+		if errSecond != nil {
+			return nil, nil, errFirst
+		}
+		return tssFirst, tssSecond, nil
+	}
+
 	// Execute binary operation in the following way:
 	//
 	// 1) execute the exprFirst
@ -410,15 +467,9 @@ func execBinaryOpArgs(qt *querytracer.Tracer, ec *EvalConfig, exprFirst, exprSec
 	if err != nil {
 		return nil, nil, err
 	}
-	switch strings.ToLower(be.Op) {
-	case "or":
-		// Do not pushdown common label filters from tssFirst for `or` operation, since this can filter out the needed time series from tssSecond.
-		// See https://prometheus.io/docs/prometheus/latest/querying/operators/#logical-set-binary-operators for details.
-	default:
 	lfs := getCommonLabelFilters(tssFirst)
 	lfs = metricsql.TrimFiltersByGroupModifier(lfs, be)
 	exprSecond = metricsql.PushdownBinaryOpFilters(exprSecond, lfs)
-	}
 	tssSecond, err := evalExpr(qt, ec, exprSecond)
 	if err != nil {
 		return nil, nil, err
--- a/app/vmselect/promql/exec_test.go
+++ b/app/vmselect/promql/exec_test.go
@ -2803,7 +2803,12 @@ func TestExecSuccess(t *testing.T) {
 	t.Run(`scalar default vector1`, func(t *testing.T) {
 		t.Parallel()
 		q := `time() > 1400 default label_set(123, "foo", "bar")`
-		resultExpected := []netstorage.Result{}
+		r := netstorage.Result{
+			MetricName: metricNameExpected,
+			Values:     []float64{nan, nan, nan, 1600, 1800, 2000},
+			Timestamps: timestampsExpected,
+		}
+		resultExpected := []netstorage.Result{r}
 		f(q, resultExpected)
 	})
 	t.Run(`scalar default vector2`, func(t *testing.T) {
@ -6092,7 +6097,18 @@ func TestExecSuccess(t *testing.T) {
 	t.Run(`ifnot-no-matching-timeseries`, func(t *testing.T) {
 		t.Parallel()
 		q := `label_set(time(), "foo", "bar") ifnot label_set(time() > 1400, "x", "y")`
-		resultExpected := []netstorage.Result{}
+		r := netstorage.Result{
+			MetricName: metricNameExpected,
+			Values:     []float64{1000, 1200, 1400, 1600, 1800, 2000},
+			Timestamps: timestampsExpected,
+		}
+		r.MetricName.Tags = []storage.Tag{
+			{
+				Key:   []byte("foo"),
+				Value: []byte("bar"),
+			},
+		}
+		resultExpected := []netstorage.Result{r}
 		f(q, resultExpected)
 	})
 	t.Run(`quantile(-2)`, func(t *testing.T) {
--- a/app/vmselect/promql/transform.go
+++ b/app/vmselect/promql/transform.go
@ -2183,17 +2183,13 @@ func transformTimezoneOffset(tfa *transformFuncArg) ([]*timeseries, error) {
 		return nil, fmt.Errorf("cannot load timezone %q: %w", tzString, err)
 	}

-	var ts timeseries
-	ts.denyReuse = true
-	timestamps := tfa.ec.getSharedTimestamps()
-	values := make([]float64, len(timestamps))
-	for i, v := range timestamps {
-		_, offset := time.Unix(v/1000, 0).In(loc).Zone()
-		values[i] = float64(offset)
+	tss := evalNumber(tfa.ec, nan)
+	ts := tss[0]
+	for i, timestamp := range ts.Timestamps {
+		_, offset := time.Unix(timestamp/1000, 0).In(loc).Zone()
+		ts.Values[i] = float64(offset)
 	}
-	ts.Values = values
-	ts.Timestamps = timestamps
-	return []*timeseries{&ts}, nil
+	return tss, nil
 }

 func transformTime(tfa *transformFuncArg) ([]*timeseries, error) {
--- a/app/vmui/Dockerfile-web
+++ b/app/vmui/Dockerfile-web
@ -6,7 +6,7 @@ COPY web/ /build/
 RUN GOOS=linux GOARCH=amd64 CGO_ENABLED=0 go build -o web-amd64 github.com/VictoriMetrics/vmui/ && \
    GOOS=windows GOARCH=amd64 CGO_ENABLED=0 go build -o web-windows github.com/VictoriMetrics/vmui/

-FROM alpine:3.16.0
+FROM alpine:3.16.1
 USER root

 COPY --from=build-web-stage /build/web-amd64 /app/web
--- a/dashboards/vmagent.json
+++ b/dashboards/vmagent.json
@ -6,7 +6,7 @@
      "type": "grafana",
      "id": "grafana",
      "name": "Grafana",
-      "version": "8.5.3"
+      "version": "8.4.4"
    },
    {
      "type": "panel",
@ -61,12 +61,12 @@
      }
    ]
  },
-  "description": "Overview for VictoriaMetrics vmagent v1.73.0 or higher",
+  "description": "Overview for VictoriaMetrics vmagent v1.80.0 or higher",
  "editable": true,
  "fiscalYearStartMonth": 0,
  "graphTooltip": 1,
  "id": null,
-  "iteration": 1656943336787,
+  "iteration": 1657810604530,
  "links": [
    {
      "icon": "doc",
@ -154,7 +154,7 @@
        "text": {},
        "textMode": "auto"
      },
-      "pluginVersion": "8.5.3",
+      "pluginVersion": "8.4.4",
      "targets": [
        {
          "expr": "sum(vm_promscrape_targets{job=~\"$job\", instance=~\"$instance\", status=\"up\"})",
@ -218,7 +218,7 @@
        "text": {},
        "textMode": "auto"
      },
-      "pluginVersion": "8.5.3",
+      "pluginVersion": "8.4.4",
      "targets": [
        {
          "expr": "sum(vm_promscrape_targets{job=~\"$job\", instance=~\"$instance\", status=\"down\"})",
@ -285,7 +285,7 @@
        "text": {},
        "textMode": "auto"
      },
-      "pluginVersion": "8.5.3",
+      "pluginVersion": "8.4.4",
      "targets": [
        {
          "expr": "sum(increase(vm_log_messages_total{job=~\"$job\", instance=~\"$instance\", level!=\"info\"}[30m]))",
@ -344,7 +344,7 @@
        "text": {},
        "textMode": "auto"
      },
-      "pluginVersion": "8.5.3",
+      "pluginVersion": "8.4.4",
      "targets": [
        {
          "expr": "sum(vm_persistentqueue_bytes_pending{job=~\"$job\", instance=~\"$instance\"})",
@ -490,7 +490,7 @@
        "alertThreshold": true
      },
      "percentage": false,
-      "pluginVersion": "8.5.3",
+      "pluginVersion": "8.4.4",
      "pointradius": 2,
      "points": false,
      "renderer": "flot",
@ -589,7 +589,7 @@
        "alertThreshold": true
      },
      "percentage": false,
-      "pluginVersion": "8.5.3",
+      "pluginVersion": "8.4.4",
      "pointradius": 2,
      "points": false,
      "renderer": "flot",
@ -702,7 +702,7 @@
        "alertThreshold": true
      },
      "percentage": false,
-      "pluginVersion": "8.5.3",
+      "pluginVersion": "8.4.4",
      "pointradius": 2,
      "points": false,
      "renderer": "flot",
@ -805,7 +805,7 @@
        "alertThreshold": true
      },
      "percentage": false,
-      "pluginVersion": "8.5.3",
+      "pluginVersion": "8.4.4",
      "pointradius": 2,
      "points": false,
      "renderer": "flot",
@ -946,7 +946,7 @@
        "alertThreshold": true
      },
      "percentage": false,
-      "pluginVersion": "8.5.3",
+      "pluginVersion": "8.4.4",
      "pointradius": 2,
      "points": false,
      "renderer": "flot",
@ -1039,7 +1039,7 @@
        "alertThreshold": true
      },
      "percentage": false,
-      "pluginVersion": "8.5.3",
+      "pluginVersion": "8.4.4",
      "pointradius": 2,
      "points": false,
      "renderer": "flot",
@ -1138,7 +1138,7 @@
        "alertThreshold": true
      },
      "percentage": false,
-      "pluginVersion": "8.5.3",
+      "pluginVersion": "8.4.4",
      "pointradius": 2,
      "points": false,
      "renderer": "flot",
@ -1237,7 +1237,7 @@
        "alertThreshold": true
      },
      "percentage": false,
-      "pluginVersion": "8.5.3",
+      "pluginVersion": "8.4.4",
      "pointradius": 2,
      "points": false,
      "renderer": "flot",
@ -1344,7 +1344,7 @@
        "alertThreshold": true
      },
      "percentage": false,
-      "pluginVersion": "8.5.3",
+      "pluginVersion": "8.4.4",
      "pointradius": 2,
      "points": false,
      "renderer": "flot",
@ -2457,7 +2457,7 @@
            "h": 8,
            "w": 12,
            "x": 0,
-            "y": 4
+            "y": 43
          },
          "hiddenSeries": false,
          "id": 60,
@ -2480,7 +2480,7 @@
            "alertThreshold": true
          },
          "percentage": false,
-          "pluginVersion": "8.5.3",
+          "pluginVersion": "8.4.4",
          "pointradius": 2,
          "points": false,
          "renderer": "flot",
@ -2555,7 +2555,7 @@
            "h": 8,
            "w": 12,
            "x": 12,
-            "y": 4
+            "y": 43
          },
          "hiddenSeries": false,
          "id": 66,
@ -2578,7 +2578,7 @@
            "alertThreshold": true
          },
          "percentage": false,
-          "pluginVersion": "8.5.3",
+          "pluginVersion": "8.4.4",
          "pointradius": 2,
          "points": false,
          "renderer": "flot",
@ -2652,7 +2652,7 @@
            "h": 8,
            "w": 12,
            "x": 0,
-            "y": 12
+            "y": 51
          },
          "hiddenSeries": false,
          "id": 61,
@ -2675,7 +2675,7 @@
            "alertThreshold": true
          },
          "percentage": false,
-          "pluginVersion": "8.5.3",
+          "pluginVersion": "8.4.4",
          "pointradius": 2,
          "points": false,
          "renderer": "flot",
@ -2748,7 +2748,7 @@
            "h": 8,
            "w": 12,
            "x": 12,
-            "y": 12
+            "y": 51
          },
          "hiddenSeries": false,
          "id": 65,
@ -2771,7 +2771,7 @@
            "alertThreshold": true
          },
          "percentage": false,
-          "pluginVersion": "8.5.3",
+          "pluginVersion": "8.4.4",
          "pointradius": 2,
          "points": false,
          "renderer": "flot",
@ -2837,7 +2837,7 @@
            "h": 8,
            "w": 12,
            "x": 0,
-            "y": 20
+            "y": 59
          },
          "heatmap": {},
          "hideZeroBuckets": false,
@ -2881,9 +2881,10 @@
          "dashLength": 10,
          "dashes": false,
          "datasource": {
+            "type": "prometheus",
            "uid": "$ds"
          },
-          "description": "Shows saturation of every connection to remote storage. If the threshold of 0.9sec is reached, then the connection is saturated by more than 90% and vmagent won't be able to keep up. This usually means that `-remoteWrite.queues` command-line flag must be increased in order to increase the number of connections per each remote storage.\n",
+          "description": "Shows saturation of every connection to remote storage. If the threshold of 90% is reached, then the connection is saturated (busy or slow) by more than 90%, so vmagent won't be able to keep up and can start buffering data. \n\nThis usually means that `-remoteWrite.queues` command-line flag must be increased in order to increase the number of connections per each remote storage.\n",
          "fieldConfig": {
            "defaults": {
              "links": []
@ -2896,7 +2897,7 @@
            "h": 8,
            "w": 12,
            "x": 12,
-            "y": 20
+            "y": 59
          },
          "hiddenSeries": false,
          "id": 84,
@ -2919,7 +2920,7 @@
            "alertThreshold": true
          },
          "percentage": false,
-          "pluginVersion": "8.5.3",
+          "pluginVersion": "8.4.4",
          "pointradius": 2,
          "points": false,
          "renderer": "flot",
@ -2930,7 +2931,7 @@
          "targets": [
            {
              "exemplar": true,
-              "expr": "sum(rate(vmagent_remotewrite_send_duration_seconds_total{job=~\"$job\", instance=~\"$instance\", url=~\"$url\"}[$__rate_interval])) by (instance, url)",
+              "expr": "sum(rate(vmagent_remotewrite_send_duration_seconds_total{job=~\"$job\", instance=~\"$instance\", url=~\"$url\"}[$__rate_interval])) by (instance, url)\n/\nmax(vmagent_remotewrite_queues{job=~\"$job\", instance=~\"$instance\", url=~\"$url\"}) by(instance, url)",
              "interval": "",
              "legendFormat": "",
              "refId": "A"
@ -2943,7 +2944,7 @@
              "fill": true,
              "line": true,
              "op": "gt",
-              "value": 0.9,
+              "value": 90,
              "yaxis": "left"
            }
          ],
@ -2963,7 +2964,7 @@
          "yaxes": [
            {
              "$$hashKey": "object:662",
-              "format": "s",
+              "format": "percentunit",
              "logBase": 1,
              "min": "0",
              "show": true
@ -2997,7 +2998,7 @@
            "h": 8,
            "w": 12,
            "x": 0,
-            "y": 28
+            "y": 67
          },
          "heatmap": {},
          "hideZeroBuckets": false,
@ -3053,7 +3054,7 @@
            "h": 8,
            "w": 12,
            "x": 12,
-            "y": 28
+            "y": 67
          },
          "heatmap": {},
          "hideZeroBuckets": false,
@ -3104,7 +3105,7 @@
            "h": 8,
            "w": 12,
            "x": 0,
-            "y": 36
+            "y": 75
          },
          "hiddenSeries": false,
          "id": 88,
@ -3124,7 +3125,7 @@
            "alertThreshold": true
          },
          "percentage": false,
-          "pluginVersion": "8.5.3",
+          "pluginVersion": "8.4.4",
          "pointradius": 2,
          "points": false,
          "renderer": "flot",
@ -3207,7 +3208,7 @@
            "h": 8,
            "w": 12,
            "x": 12,
-            "y": 36
+            "y": 75
          },
          "hiddenSeries": false,
          "id": 90,
@ -3227,7 +3228,7 @@
            "alertThreshold": true
          },
          "percentage": false,
-          "pluginVersion": "8.5.3",
+          "pluginVersion": "8.4.4",
          "pointradius": 2,
          "points": false,
          "renderer": "flot",
@ -4567,7 +4568,7 @@
    }
  ],
  "refresh": "",
-  "schemaVersion": 36,
+  "schemaVersion": 35,
  "style": "dark",
  "tags": [
    "vmagent",
@ -4577,7 +4578,9 @@
    "list": [
      {
        "current": {
-          "selected": false
+          "selected": true,
+          "text": "VM",
+          "value": "VM"
        },
        "hide": 0,
        "includeAll": false,
--- a/deployment/docker/Makefile
+++ b/deployment/docker/Makefile
@ -2,8 +2,8 @@

 DOCKER_NAMESPACE := victoriametrics

-ROOT_IMAGE ?= alpine:3.16.0
-CERTS_IMAGE := alpine:3.16.0
+ROOT_IMAGE ?= alpine:3.16.1
+CERTS_IMAGE := alpine:3.16.1
 GO_BUILDER_IMAGE := golang:1.18.4-alpine
 BUILDER_IMAGE := local/builder:2.0.0-$(shell echo $(GO_BUILDER_IMAGE) | tr :/ __)-1
 BASE_IMAGE := local/base:1.1.3-$(shell echo $(ROOT_IMAGE) | tr :/ __)-$(shell echo $(CERTS_IMAGE) | tr :/ __)
--- a/deployment/docker/alerts.yml
+++ b/deployment/docker/alerts.yml
@ -270,7 +270,9 @@ groups:
            Ensure that destination is up and reachable."

      - alert: RemoteWriteConnectionIsSaturated
-        expr: rate(vmagent_remotewrite_send_duration_seconds_total[5m]) > 0.9
+        expr: |
+          sum(rate(vmagent_remotewrite_send_duration_seconds_total[5m])) by(job, instance, url) 
+          > 0.9 * max(vmagent_remotewrite_queues) by(job, instance, url)
        for: 15m
        labels:
          severity: warning
--- a/deployment/docker/docker-compose.yml
+++ b/deployment/docker/docker-compose.yml
@ -40,7 +40,7 @@ services:
    restart: always
  grafana:
    container_name: grafana
-    image: grafana/grafana:9.0.2
+    image: grafana/grafana:9.0.3
    depends_on:
      - "victoriametrics"
    ports:
--- a/docs/Articles.md
+++ b/docs/Articles.md
@ -9,6 +9,7 @@ See also [case studies](https://docs.victoriametrics.com/CaseStudies.html).
 ## Third-party articles and slides about VictoriaMetrics

 * [Optimizing the Storage of Large Volumes of Metrics for a Long Time in VictoriaMetrics](https://percona.community/blog/2022/06/02/long-time-keeping-metrics-victoriametrics/)
+* [How do We Keep Metrics for a Long Time in VictoriaMetrics](https://www.youtube.com/watch?v=SGZjY7xgDwE)
 * [Announcing Asserts](https://www.asserts.ai/blog/announcing-asserts/)
 * [Choosing a Time Series Database for High Cardinality Aggregations](https://abiosgaming.com/press/high-cardinality-aggregations/)
 * [Scaling to trillions of metric data points](https://engineering.razorpay.com/scaling-to-trillions-of-metric-data-points-f569a5b654f2)
--- a/docs/CHANGELOG.md
+++ b/docs/CHANGELOG.md
@ -15,6 +15,15 @@ The following tip changes can be tested by building VictoriaMetrics components f

 ## tip

+* FEATURE: [MetricsQL](https://docs.victoriametrics.com/MetricsQL.html): execute left and right sides of certain operations in parallel. For example, `q1 or q2`, `aggr_func(q1) <op> q2`, `q1 <op> aggr_func(q1)`. This may improve query performance if VictoriaMetrics has enough free resources for parallel processing of both sides of the operation. See [this feature request](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2886).
+* FEATURE: [vmauth](https://docs.victoriametrics.com/vmagent.html): allow duplicate username records with different passwords at configuration file. It should allow password rotation without username change.
+* FEATURE: add ability to push internal metrics (e.g. metrics exposed at `/metrics` page) to the configured remote storage from all the VictoriaMetrics components. See [these docs](https://docs.victoriametrics.com/#push-metrics).
+
+* BUGFIX: [vmagent](https://docs.victoriametrics.com/vmagent.html): restart all the scrape jobs during [config reload](https://docs.victoriametrics.com/vmagent.html#configuration-update) after `global` section is changed inside `-promscrape.config`. See [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2884).
+* BUGFIX: [vmagent](https://docs.victoriametrics.com/vmagent.html): properly assume role with AWS ECS credentials. See [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2875). Thanks to @transacid for [the fix](https://github.com/VictoriaMetrics/VictoriaMetrics/pull/2876).
+* BUGFIX: [MetricsQL](https://docs.victoriametrics.com/MetricsQL.html): return series from `q1` if `q2` doesn't return matching time series in the query `q1 ifnot q2`. Previously series from `q1` weren't returned in this case.
+
+
 ## [v1.79.0](https://github.com/VictoriaMetrics/VictoriaMetrics/releases/tag/v1.79.0)

 Released at 14-07-2022
@ -27,6 +36,8 @@ Released at 14-07-2022

 **Update note 4:** this release removes support of deprecated in [1.70.0](https://github.com/VictoriaMetrics/VictoriaMetrics/releases/tag/v1.70.0) param `extra_filter_labels` from [vmalert's](https://docs.victoriametrics.com/vmalert.html) groups definition. This deprecated param was replaced with [params](https://docs.victoriametrics.com/vmalert.html#url-params).

+**Update note 5:** this release changes naming for published linux binaries at [releases](https://github.com/VictoriaMetrics/VictoriaMetrics/releases). Now names for binaries for all the supported platforms match the following template - `$(APP_NAME)-$(GOOS)-$(GOARCH)-$(VERSION).tar.gz`. For example, `victoria-metrics-linux-amd64-v1.79.0.tar.gz`. Previously linux binaries didn't have `$(GOOS)` part, e.g. they had the name `victoria-metrics-amd64-v1.79.0.tar.gz`. Please update automation scripts for upgrading VictoriaMetrics releases according to this change.
+
 * FEATURE: [vmagent](https://docs.victoriametrics.com/vmagent.html): add [azure_sd_configs](https://prometheus.io/docs/prometheus/latest/configuration/configuration/#azure_sd_config) service discovery mechanism. It allows discovering Virtual Machines at [Azure Cloud](https://azure.microsoft.com/en-us/). See [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1364).
 * FEATURE: [vmalert](https://docs.victoriametrics.com/vmalert.html): deprecate alert's status link `/api/v1/<groupID>/<alertID>/status` in favour of `api/v1/alert?group_id=<group_id>&alert_id=<alert_id>"`. The old alert's status link is still supported, but will be removed in future releases. See [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2825).
 * FEATURE: [cluster version of VictoriaMetrics](https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html): add support for querying lower-level `vmselect` nodes from upper-level `vmselect` nodes. This makes possible to build multi-level cluster setups for global querying view and HA purposes without the need to use [Promxy](https://github.com/jacksontj/promxy). See [these docs](https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#multi-level-cluster-setup) and [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2778).
--- a/docs/Cluster-VictoriaMetrics.md
+++ b/docs/Cluster-VictoriaMetrics.md
@ -648,6 +648,14 @@ Below is the output for `/path/to/vminsert -help`:
     Trim timestamps for OpenTSDB HTTP data to this duration. Minimum practical duration is 1ms. Higher duration (i.e. 1s) may be used for reducing disk space usage for timestamp data (default 1ms)
  -pprofAuthKey string
     Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -relabelConfig string
     Optional path to a file with relabeling rules, which are applied to all the ingested metrics. The path can point either to local file or to http url. See https://docs.victoriametrics.com/#relabeling for details. The config is reloaded on SIGHUP signal
  -relabelDebug
@ -778,6 +786,14 @@ Below is the output for `/path/to/vmselect -help`:
     Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
  -pprofAuthKey string
     Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -replicationFactor int
     How many copies of every time series is available on vmstorage nodes. See -replicationFactor command-line flag for vminsert nodes (default 1)
  -search.cacheTimestampOffset duration
@ -789,7 +805,7 @@ Below is the output for `/path/to/vmselect -help`:
  -search.graphiteMaxPointsPerSeries int
     The maximum number of points per series Graphite render API can return (default 1000000)
  -search.graphiteStorageStep duration
-     The interval between datapoints stored in the database. It is used at Graphite Render API handler for normalizing the interval between datapoints in case it isn't normalized. It can be overriden by sending 'storage_step' query arg to /render API or by sending the desired interval via 'Storage-Step' http header during querying /render API (default 10s)
+     The interval between datapoints stored in the database. It is used at Graphite Render API handler for normalizing the interval between datapoints in case it isn't normalized. It can be overridden by sending 'storage_step' query arg to /render API or by sending the desired interval via 'Storage-Step' http header during querying /render API (default 10s)
  -search.latencyOffset duration
     The time when data points become visible in query results after the collection. Too small value can result in incomplete last points for query results (default 30s)
  -search.logSlowQueryDuration duration
@ -962,6 +978,14 @@ Below is the output for `/path/to/vmstorage -help`:
     Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
  -precisionBits int
     The number of precision bits to store per each value. Lower precision bits improves data compression at the cost of precision loss (default 64)
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -retentionPeriod value
     Data with timestamps outside the retentionPeriod is automatically deleted
     The following optional suffixes are supported: h (hour), d (day), w (week), y (year). If suffix isn't set, then the duration is counted in months (default 1)
--- a/docs/FAQ.md
+++ b/docs/FAQ.md
@ -255,9 +255,9 @@ Memory usage for VictoriaMetrics components can be tuned according to the follow
 * [Troubleshooting for vmagent](https://docs.victoriametrics.com/vmagent.html#troubleshooting)
 * [Troubleshooting for single-node VictoriaMetrics](https://docs.victoriametrics.com/#troubleshooting)

-## How can I run VictoriaMetrics on FreeBSD?
+## How can I run VictoriaMetrics on FreeBSD/OpenBSD?

-VictoriaMetrics is included in FreeBSD ports, so just install it from there. See [this link](https://www.freebsd.org/cgi/ports.cgi?query=victoria&stype=all).
+VictoriaMetrics is included in [OpenBSD](https://github.com/openbsd/ports/blob/c1bfea520bbb30d6e5f8d0f09115ace341f820d6/infrastructure/db/user.list#L383) and [FreeBSD](https://www.freebsd.org/cgi/ports.cgi?query=victoria&stype=all) ports so just install it from there or use pre-built binaries from [releases page](https://github.com/VictoriaMetrics/VictoriaMetrics/releases).

 ## Does VictoriaMetrics support the Graphite query language?

--- a/docs/MetricsQL.md
+++ b/docs/MetricsQL.md
@ -782,7 +782,7 @@ sum by (__name__) (

 #### label_transform

-`label_transform(q, "label", "regexp", "replacement")` substitutes all the `regexp` occurences by the given `replacement` in the given `label`.
+`label_transform(q, "label", "regexp", "replacement")` substitutes all the `regexp` occurrences by the given `replacement` in the given `label`.

 #### label_uppercase

--- a/docs/README.md
+++ b/docs/README.md
@ -248,7 +248,7 @@ It is also safe downgrading to older versions unless [release notes](https://git

 The following steps must be performed during the upgrade / downgrade procedure:

-* Send `SIGINT` signal to VictoriaMetrics process in order to gracefully stop it.
+* Send `SIGINT` signal to VictoriaMetrics process in order to gracefully stop it. See [how to send signals to processes](https://stackoverflow.com/questions/33239959/send-signal-to-process-from-command-line).
 * Wait until the process stops. This can take a few seconds.
 * Start the upgraded VictoriaMetrics.

@ -411,7 +411,7 @@ and stream plain InfluxDB line protocol data to the configured TCP and/or UDP ad
 VictoriaMetrics performs the following transformations to the ingested InfluxDB data:

 * [db query arg](https://docs.influxdata.com/influxdb/v1.7/tools/api/#write-http-endpoint) is mapped into `db` label value
-  unless `db` tag exists in the InfluxDB line. The `db` label name can be overriden via `-influxDBLabel` command-line flag.
+  unless `db` tag exists in the InfluxDB line. The `db` label name can be overridden via `-influxDBLabel` command-line flag.
 * Field names are mapped to time series names prefixed with `{measurement}{separator}` value, where `{separator}` equals to `_` by default. It can be changed with `-influxMeasurementFieldSeparator` command-line flag. See also `-influxSkipSingleField` command-line flag. If `{measurement}` is empty or if `-influxSkipMeasurement` command-line flag is set, then time series names correspond to field names.
 * Field values are mapped to time series values.
 * Tags are mapped to Prometheus labels as-is.
@ -704,7 +704,7 @@ VictoriaMetrics supports the following handlers from [Graphite Metrics API](http
 VictoriaMetrics accepts the following additional query args at `/metrics/find` and `/metrics/expand`:

 * `label` - for selecting arbitrary label values. By default `label=__name__`, i.e. metric names are selected.
-* `delimiter` - for using different delimiters in metric name hierachy. For example, `/metrics/find?delimiter=_&query=node_*` would return all the metric name prefixes
+* `delimiter` - for using different delimiters in metric name hierarchy. For example, `/metrics/find?delimiter=_&query=node_*` would return all the metric name prefixes
    that start with `node_`. By default `delimiter=.`.

 ### Graphite Tags API usage
@ -823,6 +823,7 @@ Send a request to `http://<victoriametrics-addr>:8428/api/v1/admin/tsdb/delete_s
 where `<timeseries_selector_for_delete>` may contain any [time series selector](https://prometheus.io/docs/prometheus/latest/querying/basics/#time-series-selectors)
 for metrics to delete. After that all the time series matching the given selector are deleted. Storage space for
 the deleted time series isn't freed instantly - it is freed during subsequent [background merges of data files](https://medium.com/@valyala/how-victoriametrics-makes-instant-snapshots-for-multi-terabyte-time-series-data-e1f3fb0e0282).
+
 Note that background merges may never occur for data from previous months, so storage space won't be freed for historical data.
 In this case [forced merge](#forced-merge) may help freeing up storage space.

@ -845,6 +846,8 @@ Using the delete API is not recommended in the following cases, since it brings
 * Reducing disk space usage by deleting unneeded time series. This doesn't work as expected, since the deleted
  time series occupy disk space until the next merge operation, which can never occur when deleting too old data.
  [Forced merge](#forced-merge) may be used for freeing up disk space occupied by old data.
+  Note that VictoriaMetrics doesn't delete entries from inverted index (aka `indexdb`) for the deleted time series.
+  Inverted index is cleaned up once per the configured [retention](#retention).

 It's better to use the `-retentionPeriod` command-line flag for efficient pruning of old data.

@ -1136,7 +1139,7 @@ Extra labels may be added to all the imported metrics by passing `extra_label=na
 For example, `/api/v1/import/prometheus?extra_label=foo=bar` would add `{foo="bar"}` label to all the imported metrics.

 If timestamp is missing in `<metric> <value> <timestamp>` Prometheus exposition format line, then the current timestamp is used during data ingestion.
-It can be overriden by passing unix timestamp in *milliseconds* via `timestamp` query arg. For example, `/api/v1/import/prometheus?timestamp=1594370496905`.
+It can be overridden by passing unix timestamp in *milliseconds* via `timestamp` query arg. For example, `/api/v1/import/prometheus?timestamp=1594370496905`.

 VictoriaMetrics accepts arbitrary number of lines in a single request to `/api/v1/import/prometheus`, i.e. it supports data streaming.

@ -1629,6 +1632,20 @@ See also more advanced [cardinality limiter in vmagent](https://docs.victoriamet

 See also [troubleshooting docs](https://docs.victoriametrics.com/Troubleshooting.html).

+## Push metrics
+
+All the VictoriaMetrics apps support pushing their metrics exposed at `/metrics` page to remote storage in Prometheus text exposition format. This can be done by specifying the following command-line flags:
+
+* `-pushmetrics.url` - the url to push metrics to. For example, `-pushmetrics.url=http://victoria-metrics:8428/api/v1/import/prometheus` instructs to push internal metrics to `/api/v1/import/prometheus` endpoint according to [these docs](#how-to-import-data-in-prometheus-exposition-format). The `-pushmetrics.url` can be specified multiple times. In this case metrics are pushed to all the specified urls. The url can contain basic auth params in the form http://user:pass@hostname/api/v1/import/prometheus .
+* `-pushmetrics.interval` - the interval between pushes. By default it is set to 10 seconds.
+* `-pushmetrics.extraLabel` - label to add to all the metrics before sending them to `-pushmetrics.url`. The label must be specified in the format `label="value"`. It is OK to specify multiple `-pushmetrics.extraLabel` command-line flags. In this case all the specified labels are added to all the metrics sending them to `-pushmetrics.url`.
+
+For example, the following command instructs VictoriaMetrics to push metrics from `/metrics` page to `https://maas.victoriametrics.com/api/v1/import/prometheus` with `user:pass` [Basic auth](https://en.wikipedia.org/wiki/Basic_access_authentication). The `instance="foobar"` and `job="vm"` labels are added to all the metrics before sending them to the remote storage:
+
+```console
+/path/to/victoria-metrics -pushmetrics.url=https://user:pass@maas.victoriametrics.com/api/v1/import/prometheus -pushmetrics.extraLabel='instance="foobar",job="vm"'
+```
+
 ## Cache removal

 VictoriaMetrics uses various internal caches. These caches are stored to `<-storageDataPath>/cache` directory during graceful shutdown (e.g. when VictoriaMetrics is stopped by sending `SIGINT` signal). The caches are read on the next VictoriaMetrics startup. Sometimes it is needed to remove such caches on the next startup. This can be performed by placing `reset_cache_on_startup` file inside the `<-storageDataPath>/cache` directory before the restart of VictoriaMetrics. See [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1447) for details.
@ -1745,7 +1762,7 @@ For accessing vmalert's UI through single-node VictoriaMetrics configure `-vmale

 Note, that vendors (including VictoriaMetrics) are often biased when doing such tests. E.g. they try highlighting
 the best parts of their product, while highlighting the worst parts of competing products.
-So we encourage users and all independent third parties to conduct their becnhmarks for various products
+So we encourage users and all independent third parties to conduct their benchmarks for various products
 they are evaluating in production and publish the results.

 As a reference, please see [benchmarks](https://docs.victoriametrics.com/Articles.html#benchmarks) conducted by
@ -2083,6 +2100,14 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
     Whether to suppress scrape errors logging. The last error for each target is always available at '/targets' page even if scrape errors logging is suppressed. See also -promscrape.suppressScrapeErrorsDelay
  -promscrape.suppressScrapeErrorsDelay duration
     The delay for suppressing repeated scrape errors logging per each scrape targets. This may be used for reducing the number of log lines related to scrape errors. See also -promscrape.suppressScrapeErrors
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -relabelConfig string
     Optional path to a file with relabeling rules, which are applied to all the ingested metrics. The path can point either to local file or to http url. See https://docs.victoriametrics.com/#relabeling for details. The config is reloaded on SIGHUP signal
  -relabelDebug
@ -2101,7 +2126,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
  -search.graphiteMaxPointsPerSeries int
     The maximum number of points per series Graphite render API can return (default 1000000)
  -search.graphiteStorageStep duration
-     The interval between datapoints stored in the database. It is used at Graphite Render API handler for normalizing the interval between datapoints in case it isn't normalized. It can be overriden by sending 'storage_step' query arg to /render API or by sending the desired interval via 'Storage-Step' http header during querying /render API (default 10s)
+     The interval between datapoints stored in the database. It is used at Graphite Render API handler for normalizing the interval between datapoints in case it isn't normalized. It can be overridden by sending 'storage_step' query arg to /render API or by sending the desired interval via 'Storage-Step' http header during querying /render API (default 10s)
  -search.latencyOffset duration
     The time when data points become visible in query results after the collection. Too small value can result in incomplete last points for query results (default 30s)
  -search.logSlowQueryDuration duration
--- a/docs/Single-server-VictoriaMetrics.md
+++ b/docs/Single-server-VictoriaMetrics.md
@ -252,7 +252,7 @@ It is also safe downgrading to older versions unless [release notes](https://git

 The following steps must be performed during the upgrade / downgrade procedure:

-* Send `SIGINT` signal to VictoriaMetrics process in order to gracefully stop it.
+* Send `SIGINT` signal to VictoriaMetrics process in order to gracefully stop it. See [how to send signals to processes](https://stackoverflow.com/questions/33239959/send-signal-to-process-from-command-line).
 * Wait until the process stops. This can take a few seconds.
 * Start the upgraded VictoriaMetrics.

@ -415,7 +415,7 @@ and stream plain InfluxDB line protocol data to the configured TCP and/or UDP ad
 VictoriaMetrics performs the following transformations to the ingested InfluxDB data:

 * [db query arg](https://docs.influxdata.com/influxdb/v1.7/tools/api/#write-http-endpoint) is mapped into `db` label value
-  unless `db` tag exists in the InfluxDB line. The `db` label name can be overriden via `-influxDBLabel` command-line flag.
+  unless `db` tag exists in the InfluxDB line. The `db` label name can be overridden via `-influxDBLabel` command-line flag.
 * Field names are mapped to time series names prefixed with `{measurement}{separator}` value, where `{separator}` equals to `_` by default. It can be changed with `-influxMeasurementFieldSeparator` command-line flag. See also `-influxSkipSingleField` command-line flag. If `{measurement}` is empty or if `-influxSkipMeasurement` command-line flag is set, then time series names correspond to field names.
 * Field values are mapped to time series values.
 * Tags are mapped to Prometheus labels as-is.
@ -708,7 +708,7 @@ VictoriaMetrics supports the following handlers from [Graphite Metrics API](http
 VictoriaMetrics accepts the following additional query args at `/metrics/find` and `/metrics/expand`:

 * `label` - for selecting arbitrary label values. By default `label=__name__`, i.e. metric names are selected.
-* `delimiter` - for using different delimiters in metric name hierachy. For example, `/metrics/find?delimiter=_&query=node_*` would return all the metric name prefixes
+* `delimiter` - for using different delimiters in metric name hierarchy. For example, `/metrics/find?delimiter=_&query=node_*` would return all the metric name prefixes
    that start with `node_`. By default `delimiter=.`.

 ### Graphite Tags API usage
@ -827,6 +827,7 @@ Send a request to `http://<victoriametrics-addr>:8428/api/v1/admin/tsdb/delete_s
 where `<timeseries_selector_for_delete>` may contain any [time series selector](https://prometheus.io/docs/prometheus/latest/querying/basics/#time-series-selectors)
 for metrics to delete. After that all the time series matching the given selector are deleted. Storage space for
 the deleted time series isn't freed instantly - it is freed during subsequent [background merges of data files](https://medium.com/@valyala/how-victoriametrics-makes-instant-snapshots-for-multi-terabyte-time-series-data-e1f3fb0e0282).
+
 Note that background merges may never occur for data from previous months, so storage space won't be freed for historical data.
 In this case [forced merge](#forced-merge) may help freeing up storage space.

@ -849,6 +850,8 @@ Using the delete API is not recommended in the following cases, since it brings
 * Reducing disk space usage by deleting unneeded time series. This doesn't work as expected, since the deleted
  time series occupy disk space until the next merge operation, which can never occur when deleting too old data.
  [Forced merge](#forced-merge) may be used for freeing up disk space occupied by old data.
+  Note that VictoriaMetrics doesn't delete entries from inverted index (aka `indexdb`) for the deleted time series.
+  Inverted index is cleaned up once per the configured [retention](#retention).

 It's better to use the `-retentionPeriod` command-line flag for efficient pruning of old data.

@ -1140,7 +1143,7 @@ Extra labels may be added to all the imported metrics by passing `extra_label=na
 For example, `/api/v1/import/prometheus?extra_label=foo=bar` would add `{foo="bar"}` label to all the imported metrics.

 If timestamp is missing in `<metric> <value> <timestamp>` Prometheus exposition format line, then the current timestamp is used during data ingestion.
-It can be overriden by passing unix timestamp in *milliseconds* via `timestamp` query arg. For example, `/api/v1/import/prometheus?timestamp=1594370496905`.
+It can be overridden by passing unix timestamp in *milliseconds* via `timestamp` query arg. For example, `/api/v1/import/prometheus?timestamp=1594370496905`.

 VictoriaMetrics accepts arbitrary number of lines in a single request to `/api/v1/import/prometheus`, i.e. it supports data streaming.

@ -1633,6 +1636,20 @@ See also more advanced [cardinality limiter in vmagent](https://docs.victoriamet

 See also [troubleshooting docs](https://docs.victoriametrics.com/Troubleshooting.html).

+## Push metrics
+
+All the VictoriaMetrics apps support pushing their metrics exposed at `/metrics` page to remote storage in Prometheus text exposition format. This can be done by specifying the following command-line flags:
+
+* `-pushmetrics.url` - the url to push metrics to. For example, `-pushmetrics.url=http://victoria-metrics:8428/api/v1/import/prometheus` instructs to push internal metrics to `/api/v1/import/prometheus` endpoint according to [these docs](#how-to-import-data-in-prometheus-exposition-format). The `-pushmetrics.url` can be specified multiple times. In this case metrics are pushed to all the specified urls. The url can contain basic auth params in the form http://user:pass@hostname/api/v1/import/prometheus .
+* `-pushmetrics.interval` - the interval between pushes. By default it is set to 10 seconds.
+* `-pushmetrics.extraLabel` - label to add to all the metrics before sending them to `-pushmetrics.url`. The label must be specified in the format `label="value"`. It is OK to specify multiple `-pushmetrics.extraLabel` command-line flags. In this case all the specified labels are added to all the metrics sending them to `-pushmetrics.url`.
+
+For example, the following command instructs VictoriaMetrics to push metrics from `/metrics` page to `https://maas.victoriametrics.com/api/v1/import/prometheus` with `user:pass` [Basic auth](https://en.wikipedia.org/wiki/Basic_access_authentication). The `instance="foobar"` and `job="vm"` labels are added to all the metrics before sending them to the remote storage:
+
+```console
+/path/to/victoria-metrics -pushmetrics.url=https://user:pass@maas.victoriametrics.com/api/v1/import/prometheus -pushmetrics.extraLabel='instance="foobar",job="vm"'
+```
+
 ## Cache removal

 VictoriaMetrics uses various internal caches. These caches are stored to `<-storageDataPath>/cache` directory during graceful shutdown (e.g. when VictoriaMetrics is stopped by sending `SIGINT` signal). The caches are read on the next VictoriaMetrics startup. Sometimes it is needed to remove such caches on the next startup. This can be performed by placing `reset_cache_on_startup` file inside the `<-storageDataPath>/cache` directory before the restart of VictoriaMetrics. See [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1447) for details.
@ -1749,7 +1766,7 @@ For accessing vmalert's UI through single-node VictoriaMetrics configure `-vmale

 Note, that vendors (including VictoriaMetrics) are often biased when doing such tests. E.g. they try highlighting
 the best parts of their product, while highlighting the worst parts of competing products.
-So we encourage users and all independent third parties to conduct their becnhmarks for various products
+So we encourage users and all independent third parties to conduct their benchmarks for various products
 they are evaluating in production and publish the results.

 As a reference, please see [benchmarks](https://docs.victoriametrics.com/Articles.html#benchmarks) conducted by
@ -2087,6 +2104,14 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
     Whether to suppress scrape errors logging. The last error for each target is always available at '/targets' page even if scrape errors logging is suppressed. See also -promscrape.suppressScrapeErrorsDelay
  -promscrape.suppressScrapeErrorsDelay duration
     The delay for suppressing repeated scrape errors logging per each scrape targets. This may be used for reducing the number of log lines related to scrape errors. See also -promscrape.suppressScrapeErrors
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -relabelConfig string
     Optional path to a file with relabeling rules, which are applied to all the ingested metrics. The path can point either to local file or to http url. See https://docs.victoriametrics.com/#relabeling for details. The config is reloaded on SIGHUP signal
  -relabelDebug
@ -2105,7 +2130,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
  -search.graphiteMaxPointsPerSeries int
     The maximum number of points per series Graphite render API can return (default 1000000)
  -search.graphiteStorageStep duration
-     The interval between datapoints stored in the database. It is used at Graphite Render API handler for normalizing the interval between datapoints in case it isn't normalized. It can be overriden by sending 'storage_step' query arg to /render API or by sending the desired interval via 'Storage-Step' http header during querying /render API (default 10s)
+     The interval between datapoints stored in the database. It is used at Graphite Render API handler for normalizing the interval between datapoints in case it isn't normalized. It can be overridden by sending 'storage_step' query arg to /render API or by sending the desired interval via 'Storage-Step' http header during querying /render API (default 10s)
  -search.latencyOffset duration
     The time when data points become visible in query results after the collection. Too small value can result in incomplete last points for query results (default 30s)
  -search.logSlowQueryDuration duration
--- a/docs/Troubleshooting.md
+++ b/docs/Troubleshooting.md
@ -50,6 +50,9 @@ If you see unexpected or unreliable query results from VictoriaMetrics, then try
   instead of raw samples stored in VictoriaMetrics. See [these docs](https://prometheus.io/docs/prometheus/latest/querying/basics/#staleness)
   for details.

+   If you migrate from InfluxDB, then pass `-search.setLookbackToStep` command-line flag to single-node VictoriaMetrics
+   or to `vmselect` in VictoriaMetrics cluster. See also [how to migrate from InfluxDB to VictoriaMetrics](https://docs.victoriametrics.com/guides/migrate-from-influx.html).
+
 3. Sometimes response caching may lead to unexpected results when samples with older timestamps
   are ingested into VictoriaMetrics (aka [backfilling](https://docs.victoriametrics.com/#backfilling)).
   Try disabling response cache and see whether this helps. This can be done in the following ways:
@ -151,7 +154,7 @@ There are the following most commons reasons for slow data ingestion in Victoria

   - If the percentage of free CPU is close to 0, then VictoriaMetrics
     may experience arbitrary long delays during data ingestion when it cannot keep up
-     with the data ingestion rate.
+     with slightly increased data ingestion rate.

   - If the percentage of free memory reaches 0, then the Operating System where VictoriaMetrics components run,
     may have no enough memory for [page cache](https://en.wikipedia.org/wiki/Page_cache).
@ -165,8 +168,8 @@ There are the following most commons reasons for slow data ingestion in Victoria
     which, in turn, slows down both data ingestion and querying. See [these docs](https://docs.victoriametrics.com/#storage) for details.

 4. If you run cluster version of VictoriaMetrics, then make sure `vminsert` and `vmstorage` components
-   are located in the same network with short network latency between them.
-   `vminsert` packs incoming data into in-memory packets and sends them to `vmstorage` on-by-one.
+   are located in the same network with small network latency between them.
+   `vminsert` packs incoming data into batch packets and sends them to `vmstorage` on-by-one.
   It waits until `vmstorage` returns back `ack` response before sending the next packet.
   If the network latency between `vminsert` and `vmstorage` is high (for example, if they run in different datacenters),
   then this may become limiting factor for data ingestion speed.
@ -196,11 +199,11 @@ There are the following solutions exist for slow queries:

 - Adding more CPU and memory to VictoriaMetrics, so it may perform the slow query faster.
  If you use cluster version of VictoriaMetrics, then migration of `vmselect` nodes to machines
-  with more CPU and RAM should help improving speed for slow queries. Remember that query performance
-  is always limited by resources of one vmselect which processes the query. For example, if 2vCPU on vmselect
-  isn't enough to process query fast enough, then prefer vertical scaling to horizontal for vmselects.
-  If on [ffficial Grafana dashboard for cluster version of VictoriaMetrics](https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#monitoring)
-  panel `Concurrent selects` is close to the limit, then prefer horizontal scaling for vmselects.
+  with more CPU and RAM should help improving speed for slow queries. Query performance
+  is always limited by resources of one vmselect which processes the query. For example, if 2vCPU cores on `vmselect`
+  isn't enough to process query fast enough, then migrating `vmselect` to a machine with 4vCPU cores should increase heavy query performance by up to 2x.
+  If the line on `Concurrent select` graph form the [official Grafana dashboard for VictoriaMetrics](https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#monitoring)
+  is close to the limit, then prefer adding more `vmselect` nodes to the cluster.
  Sometimes adding more `vmstorage` nodes also can help improving the speed for slow queries.

 - Rewriting slow queries, so they become faster. Unfortunately it is hard determining
@ -211,6 +214,21 @@ There are the following solutions exist for slow queries:
  which explains how to determine and optimize slow queries.

  In practice many slow queries are generated because of improper use of [subqueries](https://docs.victoriametrics.com/MetricsQL.html#subqueries).
+  It is recommended avoiding subqueries if you don't understand clearly how they work.
+  It is easy to create a subquery without knowing about it.
+  For example, `rate(sum(some_metric))` is implicitly transformed into the following subquery
+  according to [implicit conversion rules for MetricsQL queries](https://docs.victoriametrics.com/MetricsQL.html#implicit-query-conversions):
+
+  ```metricsql
+  rate(
+    sum(
+      default_rollup(some_metric[1i])
+    )[1i:1i]
+  )
+  ```
+
+  It is likely this query won't return the expected results. Instead, `sum(rate(some_metric))` must be used instead.
+  See [this article](https://www.robustperception.io/rate-then-sum-never-sum-then-rate/) for more details.


 ## Out of memory errors
--- a/docs/vmagent.md
+++ b/docs/vmagent.md
@ -126,7 +126,7 @@ Please see [these docs](#relabeling) for details.

 ### Splitting data streams among multiple systems

-`vmagent` supports splitting the collected data between muliple destinations with the help of `-remoteWrite.urlRelabelConfig`,
+`vmagent` supports splitting the collected data between multiple destinations with the help of `-remoteWrite.urlRelabelConfig`,
 which is applied independently for each configured `-remoteWrite.url` destination. For example, it is possible to replicate or split
 data among long-term remote storage, short-term remote storage and a real-time analytical system [built on top of Kafka](https://github.com/Telefonica/prometheus-kafka-adapter).
 Note that each destination can receive it's own subset of the collected data due to per-destination relabeling via `-remoteWrite.urlRelabelConfig`.
@ -140,7 +140,7 @@ Also, Basic Auth can be enabled for the incoming `remote_write` requests with `-

 ### remote_write for clustered version

-While `vmagent` can accept data in several supported protocols (OpenTSDB, Influx, Prometheus, Graphite) and scrape data from various targets, writes are always peformed in Promethes remote_write protocol. Therefore for the [clustered version](https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html), `-remoteWrite.url` the command-line flag should be configured as `<schema>://<vminsert-host>:8480/insert/<accountID>/prometheus/api/v1/write` according to [these docs](https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#url-format). There is also support for multitenant writes. See [these docs](#multitenancy).
+While `vmagent` can accept data in several supported protocols (OpenTSDB, Influx, Prometheus, Graphite) and scrape data from various targets, writes are always performed in Promethes remote_write protocol. Therefore for the [clustered version](https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html), `-remoteWrite.url` the command-line flag should be configured as `<schema>://<vminsert-host>:8480/insert/<accountID>/prometheus/api/v1/write` according to [these docs](https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#url-format). There is also support for multitenant writes. See [these docs](#multitenancy).

 ## Multitenancy

@ -336,7 +336,7 @@ The following articles contain useful information about Prometheus relabeling:

 VictoriaMetrics provides the following additional relabeling actions on top of standard actions from the [Prometheus relabeling](https://prometheus.io/docs/prometheus/latest/configuration/configuration/#relabel_config):

-* `replace_all` replaces all of the occurences of `regex` in the values of `source_labels` with the `replacement` and stores the results in the `target_label`. For example, the following relabeling config replaces all the occurences of `-` char in metric names with `_` char (e.g. `foo-bar-baz` metric name is transformed into `foo_bar_baz`):
+* `replace_all` replaces all of the occurrences of `regex` in the values of `source_labels` with the `replacement` and stores the results in the `target_label`. For example, the following relabeling config replaces all the occurrences of `-` char in metric names with `_` char (e.g. `foo-bar-baz` metric name is transformed into `foo_bar_baz`):

  ```yaml
  - action: replace_all
@ -346,7 +346,7 @@ VictoriaMetrics provides the following additional relabeling actions on top of s
    replacement: "_"
  ```

-* `labelmap_all` replaces all of the occurences of `regex` in all the label names with the `replacement`. For example, the following relabeling config replaces all the occurences of `-` char in all the label names with `_` char (e.g. `foo-bar-baz` label name is transformed into `foo_bar_baz`):
+* `labelmap_all` replaces all of the occurrences of `regex` in all the label names with the `replacement`. For example, the following relabeling config replaces all the occurrences of `-` char in all the label names with `_` char (e.g. `foo-bar-baz` label name is transformed into `foo_bar_baz`):

  ```yaml
  - action: labelmap_all
@ -1083,6 +1083,14 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
     Whether to suppress scrape errors logging. The last error for each target is always available at '/targets' page even if scrape errors logging is suppressed. See also -promscrape.suppressScrapeErrorsDelay
  -promscrape.suppressScrapeErrorsDelay duration
     The delay for suppressing repeated scrape errors logging per each scrape targets. This may be used for reducing the number of log lines related to scrape errors. See also -promscrape.suppressScrapeErrors
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -remoteWrite.aws.accessKey array
     Optional AWS AccessKey to use for the corresponding -remoteWrite.url if -remoteWrite.aws.useSigv4 is set
     Supports an array of values separated by comma or specified via multiple flags.
--- a/docs/vmalert.md
+++ b/docs/vmalert.md
@ -791,6 +791,14 @@ The shortlist of configuration flags is the following:
     The maximum duration for waiting to perform API requests if more than -promscrape.discovery.concurrency requests are simultaneously performed (default 1m0s)
  -promscrape.dnsSDCheckInterval duration
     Interval for checking for changes in dns. This works only if dns_sd_configs is configured in '-promscrape.config' file. See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#dns_sd_config for details (default 30s)
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -remoteRead.basicAuth.password string
     Optional basic auth password for -remoteRead.url
  -remoteRead.basicAuth.passwordFile string
--- a/docs/vmauth.md
+++ b/docs/vmauth.md
@ -40,7 +40,8 @@ Each `url_prefix` in the [-auth.config](#auth-config) may contain either a singl

 ```yml
 # Arbitrary number of usernames may be put here.
-# Username and bearer_token values must be unique.
+# It is possible to set multiple identical usernames with different passwords.
+# Such usernames can be differentiated by `name` option.

 users:
  # Requests with the 'Authorization: Bearer XXXX' and 'Authorization: Token XXXX'
@ -291,6 +292,14 @@ See the docs at https://docs.victoriametrics.com/vmauth.html .
     Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
  -pprofAuthKey string
     Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -reloadAuthKey string
     Auth key for /-/reload http endpoint. It must be passed as authKey=...
  -tls
--- a/docs/vmbackup.md
+++ b/docs/vmbackup.md
@ -243,6 +243,14 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
     Optional origin directory on the remote storage with old backup for server-side copying when performing full backup. This speeds up full backups
  -pprofAuthKey string
     Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -s3ForcePathStyle
     Prefixing endpoint with bucket name when set false, true by default. (default true)
  -snapshot.createURL string
--- a/docs/vmbackupmanager.md
+++ b/docs/vmbackupmanager.md
@ -242,6 +242,14 @@ vmbackupmanager performs regular backups according to the provided configs.
     Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
  -pprofAuthKey string
     Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -runOnStart
     Upload backups immediately after start of the service. Otherwise the backup starts on new hour
  -s3ForcePathStyle
--- a/docs/vmgateway.md
+++ b/docs/vmgateway.md
@ -285,6 +285,14 @@ The shortlist of configuration flags include the following:
     Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
  -pprofAuthKey string
     Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -ratelimit.config string
     path for configuration file. Accepts url address
  -ratelimit.configCheckInterval duration
--- a/docs/vmrestore.md
+++ b/docs/vmrestore.md
@ -145,6 +145,14 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
     Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
  -pprofAuthKey string
     Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
+  -pushmetrics.extraLabels array
+     Optional labels to add to metrics pushed to -pushmetrics.url . For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url
+     Supports an array of values separated by comma or specified via multiple flags.
+  -pushmetrics.interval duration
+     Interval for pushing metrics to -pushmetrics.url (default 10s)
+  -pushmetrics.url array
+     Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . By default metrics exposed at /metrics page aren't pushed to any remote storage
+     Supports an array of values separated by comma or specified via multiple flags.
  -s3ForcePathStyle
     Prefixing endpoint with bucket name when set false, true by default. (default true)
  -skipBackupCompleteCheck
--- a/go.mod
+++ b/go.mod
@ -9,9 +9,9 @@ require (
 	// Do not use the original github.com/valyala/fasthttp because of issues
 	// like https://github.com/valyala/fasthttp/commit/996610f021ff45fdc98c2ce7884d5fa4e7f9199b
 	github.com/VictoriaMetrics/fasthttp v1.1.0
-	github.com/VictoriaMetrics/metrics v1.18.1
+	github.com/VictoriaMetrics/metrics v1.19.3
 	github.com/VictoriaMetrics/metricsql v0.44.1
-	github.com/aws/aws-sdk-go v1.44.53
+	github.com/aws/aws-sdk-go v1.44.56
 	github.com/cespare/xxhash/v2 v2.1.2
 	github.com/cpuguy83/go-md2man/v2 v2.0.2 // indirect

@ -37,7 +37,7 @@ require (
 	github.com/valyala/quicktemplate v1.7.0
 	golang.org/x/net v0.0.0-20220708220712-1185a9018129
 	golang.org/x/oauth2 v0.0.0-20220630143837-2104d58473e0
-	golang.org/x/sys v0.0.0-20220712014510-0a85c31ab51e
+	golang.org/x/sys v0.0.0-20220715151400-c0bba94af5f8
 	google.golang.org/api v0.87.0
 	gopkg.in/yaml.v2 v2.4.0
 )
@ -76,7 +76,7 @@ require (
 	golang.org/x/text v0.3.7 // indirect
 	golang.org/x/xerrors v0.0.0-20220609144429-65e65417b02f // indirect
 	google.golang.org/appengine v1.6.7 // indirect
-	google.golang.org/genproto v0.0.0-20220712132514-bdd2acd4974d // indirect
+	google.golang.org/genproto v0.0.0-20220715211116-798f69b842b9 // indirect
 	google.golang.org/grpc v1.48.0 // indirect
 	google.golang.org/protobuf v1.28.0 // indirect
 )
--- a/go.sum
+++ b/go.sum
@ -107,8 +107,9 @@ github.com/VictoriaMetrics/fastcache v1.10.0 h1:5hDJnLsKLpnUEToub7ETuRu8RCkb40wo
 github.com/VictoriaMetrics/fastcache v1.10.0/go.mod h1:tjiYeEfYXCqacuvYw/7UoDIeJaNxq6132xHICNP77w8=
 github.com/VictoriaMetrics/fasthttp v1.1.0 h1:3crd4YWHsMwu60GUXRH6OstowiFvqrwS4a/ueoLdLL0=
 github.com/VictoriaMetrics/fasthttp v1.1.0/go.mod h1:/7DMcogqd+aaD3G3Hg5kFgoFwlR2uydjiWvoLp5ZTqQ=
-github.com/VictoriaMetrics/metrics v1.18.1 h1:OZ0+kTTto8oPfHnVAnTOoyl0XlRhRkoQrD2n2cOuRw0=
 github.com/VictoriaMetrics/metrics v1.18.1/go.mod h1:ArjwVz7WpgpegX/JpB0zpNF2h2232kErkEnzH1sxMmA=
+github.com/VictoriaMetrics/metrics v1.19.3 h1:cr7yyS6fHSzjvwCAYsJbvh8qaRfFzilkcqgHgO97e6Y=
+github.com/VictoriaMetrics/metrics v1.19.3/go.mod h1:ArjwVz7WpgpegX/JpB0zpNF2h2232kErkEnzH1sxMmA=
 github.com/VictoriaMetrics/metricsql v0.44.1 h1:qGoRt0g84uMUscVjS7P3uDZKmjJubWKaIx9v0iHKgck=
 github.com/VictoriaMetrics/metricsql v0.44.1/go.mod h1:6pP1ZeLVJHqJrHlF6Ij3gmpQIznSsgktEcZgsAWYel0=
 github.com/VividCortex/ewma v1.2.0 h1:f58SaIzcDXrSy3kWaHNvuJgJ3Nmz59Zji6XoJR/q1ow=
@ -146,8 +147,8 @@ github.com/aws/aws-lambda-go v1.13.3/go.mod h1:4UKl9IzQMoD+QF79YdCuzCwp8VbmG4VAQ
 github.com/aws/aws-sdk-go v1.27.0/go.mod h1:KmX6BPdI08NWTb3/sm4ZGu5ShLoqVDhKgpiN924inxo=
 github.com/aws/aws-sdk-go v1.34.28/go.mod h1:H7NKnBqNVzoTJpGfLrQkkD+ytBA93eiDYi/+8rV9s48=
 github.com/aws/aws-sdk-go v1.35.31/go.mod h1:hcU610XS61/+aQV88ixoOzUoG7v3b31pl2zKMmprdro=
-github.com/aws/aws-sdk-go v1.44.53 h1:2MErE8gRyBLuE1fuH2Sqlj1xoN3S6/jXb0aO/A1jGfk=
-github.com/aws/aws-sdk-go v1.44.53/go.mod h1:y4AeaBuwd2Lk+GepC1E9v0qOiTws0MIWAX4oIKwKHZo=
+github.com/aws/aws-sdk-go v1.44.56 h1:bT+lExwagH7djxb6InKUVkEKGPAj5aAPnV85/m1fKro=
+github.com/aws/aws-sdk-go v1.44.56/go.mod h1:y4AeaBuwd2Lk+GepC1E9v0qOiTws0MIWAX4oIKwKHZo=
 github.com/aws/aws-sdk-go-v2 v0.18.0/go.mod h1:JWVYvqSMppoMJC0x5wdwiImzgXTI9FuZwxzkQq9wy+g=
 github.com/beorn7/perks v0.0.0-20180321164747-3a771d992973/go.mod h1:Dwedo/Wpr24TaqPxmxbtue+5NUziq4I4S80YR8gNf3Q=
 github.com/beorn7/perks v1.0.0/go.mod h1:KWe93zE9D1o94FZ5RNwFwVgaQK1VOXiVxmqh+CedLV8=
@ -1137,8 +1138,8 @@ golang.org/x/sys v0.0.0-20220520151302-bc2c85ada10a/go.mod h1:oPkhp1MJrh7nUepCBc
 golang.org/x/sys v0.0.0-20220610221304-9f5ed59c137d/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
 golang.org/x/sys v0.0.0-20220615213510-4f61da869c0c/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
 golang.org/x/sys v0.0.0-20220624220833-87e55d714810/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
-golang.org/x/sys v0.0.0-20220712014510-0a85c31ab51e h1:NHvCuwuS43lGnYhten69ZWqi2QOj/CiDNcKbVqwVoew=
-golang.org/x/sys v0.0.0-20220712014510-0a85c31ab51e/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
+golang.org/x/sys v0.0.0-20220715151400-c0bba94af5f8 h1:0A+M6Uqn+Eje4kHMK80dtF3JCXC4ykBgQG4Fe06QRhQ=
+golang.org/x/sys v0.0.0-20220715151400-c0bba94af5f8/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
 golang.org/x/term v0.0.0-20201126162022-7de9c90e9dd1/go.mod h1:bj7SfCRtBDWHUb9snDiAeCFNEtKQo2Wmx5Cou7ajbmo=
 golang.org/x/term v0.0.0-20210927222741-03fcf44c2211/go.mod h1:jbD1KX2456YbFQfuXm/mYQcufACuNUgVhRMnK/tPxf8=
 golang.org/x/text v0.0.0-20170915032832-14c0d48ead0c/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
@ -1381,8 +1382,8 @@ google.golang.org/genproto v0.0.0-20220616135557-88e70c0c3a90/go.mod h1:KEWEmljW
 google.golang.org/genproto v0.0.0-20220617124728-180714bec0ad/go.mod h1:KEWEmljWE5zPzLBa/oHl6DaEt9LmfH6WtH1OHIvleBA=
 google.golang.org/genproto v0.0.0-20220624142145-8cd45d7dbd1f/go.mod h1:KEWEmljWE5zPzLBa/oHl6DaEt9LmfH6WtH1OHIvleBA=
 google.golang.org/genproto v0.0.0-20220628213854-d9e0b6570c03/go.mod h1:KEWEmljWE5zPzLBa/oHl6DaEt9LmfH6WtH1OHIvleBA=
-google.golang.org/genproto v0.0.0-20220712132514-bdd2acd4974d h1:YbuF5+kdiC516xIP60RvlHeFbY9sRDR73QsAGHpkeVw=
-google.golang.org/genproto v0.0.0-20220712132514-bdd2acd4974d/go.mod h1:KEWEmljWE5zPzLBa/oHl6DaEt9LmfH6WtH1OHIvleBA=
+google.golang.org/genproto v0.0.0-20220715211116-798f69b842b9 h1:1aEQRgZ4Gks2SRAkLzIPpIszRazwVfjSFe1cKc+e0Jg=
+google.golang.org/genproto v0.0.0-20220715211116-798f69b842b9/go.mod h1:GkXuJDJ6aQ7lnJcRF+SJVgFdQhypqgl3LB1C9vabdRE=
 google.golang.org/grpc v1.17.0/go.mod h1:6QZJwpn2B+Zp71q/5VxRsJ6NXXVCE5NRUHRo+f3cWCs=
 google.golang.org/grpc v1.19.0/go.mod h1:mqu4LbDTu4XGKhr4mRzUsmM4RtVoemTSY81AxZiDr8c=
 google.golang.org/grpc v1.20.0/go.mod h1:chYK+tFQF0nDUGJgXMSgLCQk3phJEuONr2DCgLDdAQM=
--- a/lib/appmetrics/appmetrics.go
+++ b/lib/appmetrics/appmetrics.go
@ -1,4 +1,4 @@
-package httpserver
+package appmetrics

 import (
 	"flag"
--- a/lib/awsapi/config.go
+++ b/lib/awsapi/config.go
@ -204,7 +204,11 @@ func (cfg *Config) getAPICredentials() (*credentials, error) {
 	}
 	if ecsMetaURI := os.Getenv("AWS_CONTAINER_CREDENTIALS_RELATIVE_URI"); len(ecsMetaURI) > 0 {
 		path := "http://169.254.170.2" + ecsMetaURI
-		return getECSRoleCredentialsByPath(cfg.client, path)
+		ac, err := getECSRoleCredentialsByPath(cfg.client, path)
+		if err != nil {
+			return nil, fmt.Errorf("cannot obtain ECS role credentials: %w", err)
+		}
+		acNew = ac
 	}

 	// we need instance credentials if dont have access keys
--- a/lib/httpserver/httpserver.go
+++ b/lib/httpserver/httpserver.go
@ -20,6 +20,7 @@ import (
 	"sync/atomic"
 	"time"

+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/appmetrics"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/fasttime"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/flagutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
@ -281,7 +282,7 @@ func handlerWrapper(s *server, w http.ResponseWriter, r *http.Request, rh Reques
 		}
 		startTime := time.Now()
 		w.Header().Set("Content-Type", "text/plain; charset=utf-8")
-		WritePrometheusMetrics(w)
+		appmetrics.WritePrometheusMetrics(w)
 		metricsHandlerDuration.UpdateDuration(startTime)
 		return
 	case "/flags":
--- a/lib/mergeset/encoding.go
+++ b/lib/mergeset/encoding.go
@ -56,7 +56,7 @@ func (ib *inmemoryBlock) Less(i, j int) bool {
 	a.Start += cpLen
 	b.Start += cpLen
 	data := ib.data
-	return string(items[i].Bytes(data)) < string(items[j].Bytes(data))
+	return string(a.Bytes(data)) < string(b.Bytes(data))
 }

 func (ib *inmemoryBlock) Swap(i, j int) {
--- a/lib/promrelabel/relabel.go
+++ b/lib/promrelabel/relabel.go
@ -297,7 +297,7 @@ func (prc *parsedRelabelConfig) apply(labels []prompbmarshal.Label, labelsOffset
 		}
 		return labels
 	case "labelmap_all":
-		// Replace all the occurences of `regex` at label names with `replacement`
+		// Replace all the occurrences of `regex` at label names with `replacement`
 		for i := range src {
 			label := &src[i]
 			label.Name, _ = prc.replaceStringSubmatches(label.Name, prc.Replacement, prc.hasCaptureGroupInReplacement)
--- a/lib/promscrape/config.go
+++ b/lib/promscrape/config.go
@ -130,6 +130,10 @@ func (cfg *Config) mustRestart(prevCfg *Config) {
 		prevScrapeCfgByName[scPrev.JobName] = scPrev
 	}

+	// Restart all the scrape jobs on Global config change.
+	// See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2884
+	needGlobalRestart := !areEqualGlobalConfigs(&cfg.Global, &prevCfg.Global)
+
 	// Loop over the the new jobs, start new ones and restart updated ones.
 	var started, stopped, restarted int
 	currentJobNames := make(map[string]struct{}, len(cfg.ScrapeConfigs))
@ -142,7 +146,7 @@ func (cfg *Config) mustRestart(prevCfg *Config) {
 			started++
 			continue
 		}
-		if areEqualScrapeConfigs(scPrev, sc) {
+		if !needGlobalRestart && areEqualScrapeConfigs(scPrev, sc) {
 			// The scrape config didn't change, so no need to restart it.
 			// Use the reference to the previous job, so it could be stopped properly later.
 			cfg.ScrapeConfigs[i] = scPrev
@ -165,6 +169,12 @@ func (cfg *Config) mustRestart(prevCfg *Config) {
 	logger.Infof("restarted service discovery routines in %.3f seconds, stopped=%d, started=%d, restarted=%d", time.Since(startTime).Seconds(), stopped, started, restarted)
 }

+func areEqualGlobalConfigs(a, b *GlobalConfig) bool {
+	sa := a.marshalJSON()
+	sb := b.marshalJSON()
+	return string(sa) == string(sb)
+}
+
 func areEqualScrapeConfigs(a, b *ScrapeConfig) bool {
 	sa := a.marshalJSON()
 	sb := b.marshalJSON()
@ -183,6 +193,14 @@ func (sc *ScrapeConfig) marshalJSON() []byte {
 	return data
 }

+func (gc *GlobalConfig) marshalJSON() []byte {
+	data, err := json.Marshal(gc)
+	if err != nil {
+		logger.Panicf("BUG: cannot marshal GlobalConfig: %s", err)
+	}
+	return data
+}
+
 func (cfg *Config) mustStop() {
 	startTime := time.Now()
 	logger.Infof("stopping service discovery routines...")
--- a/lib/pushmetrics/pushmetrics.go
+++ b/lib/pushmetrics/pushmetrics.go
@ -0,0 +1,32 @@
+package pushmetrics
+
+import (
+	"flag"
+	"strings"
+	"time"
+
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/appmetrics"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/flagutil"
+	"github.com/VictoriaMetrics/metrics"
+)
+
+var (
+	pushURL = flagutil.NewArray("pushmetrics.url", "Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/#push-metrics . "+
+		"By default metrics exposed at /metrics page aren't pushed to any remote storage")
+	pushInterval    = flag.Duration("pushmetrics.interval", 10*time.Second, "Interval for pushing metrics to -pushmetrics.url")
+	pushExtraLabels = flagutil.NewArray("pushmetrics.extraLabels", "Optional labels to add to metrics pushed to -pushmetrics.url . "+
+		`For example, -pushmetrics.extraLabels='instance="foo"' adds instance="foo" label to all the metrics pushed to -pushmetrics.url`)
+)
+
+func init() {
+	// The -pushmetrics.url flag can contain basic auth creds, so it mustn't be visible when exposing the flags.
+	flagutil.RegisterSecretFlag("pushmetrics.url")
+}
+
+// Init must be called after flag.Parse.
+func Init() {
+	extraLabels := strings.Join(*pushExtraLabels, ",")
+	for _, pu := range *pushURL {
+		metrics.InitPushExt(pu, *pushInterval, extraLabels, appmetrics.WritePrometheusMetrics)
+	}
+}
--- a/vendor/github.com/VictoriaMetrics/metrics/README.md
+++ b/vendor/github.com/VictoriaMetrics/metrics/README.md
@ -16,6 +16,9 @@
 * Allows exporting distinct metric sets via distinct endpoints. See [Set](http://godoc.org/github.com/VictoriaMetrics/metrics#Set).
 * Supports [easy-to-use histograms](http://godoc.org/github.com/VictoriaMetrics/metrics#Histogram), which just work without any tuning.
  Read more about VictoriaMetrics histograms at [this article](https://medium.com/@valyala/improving-histogram-usability-for-prometheus-and-grafana-bc7e5df0e350).
+* Can push metrics to VictoriaMetrics or to any other remote storage, which accepts metrics
+  in [Prometheus text exposition format](https://github.com/prometheus/docs/blob/main/content/docs/instrumenting/exposition_formats.md#text-based-format).
+  See [these docs](http://godoc.org/github.com/VictoriaMetrics/metrics#InitPush).


 ### Limitations
@ -28,8 +31,8 @@
 ```go
 import "github.com/VictoriaMetrics/metrics"

-// Register various time series.
-// Time series name may contain labels in Prometheus format - see below.
+// Register various metrics.
+// Metric name may contain labels in Prometheus format - see below.
 var (
 	// Register counter without labels.
 	requestsTotal = metrics.NewCounter("requests_total")
@ -64,6 +67,10 @@ func requestHandler() {
 http.HandleFunc("/metrics", func(w http.ResponseWriter, req *http.Request) {
 	metrics.WritePrometheus(w, true)
 })
+
+// ... or push registered metrics every 10 seconds to http://victoria-metrics:8428/api/v1/import/prometheus
+// with the added `instance="foobar"` label to all the pushed metrics.
+metrics.InitPush("http://victoria-metrics:8428/api/v1/import/prometheus", 10*time.Second, `instance="foobar"`, true)
 ```

 See [docs](http://godoc.org/github.com/VictoriaMetrics/metrics) for more info.
@ -86,8 +93,8 @@ Because the `github.com/prometheus/client_golang` is too complex and is hard to
 #### Why the `metrics.WritePrometheus` doesn't expose documentation for each metric?

 Because this documentation is ignored by Prometheus. The documentation is for users.
-Just give meaningful names to the exported metrics or add comments in the source code
-or in other suitable place explaining each metric exposed from your application.
+Just give [meaningful names to the exported metrics](https://prometheus.io/docs/practices/naming/#metric-names)
+or add comments in the source code or in other suitable place explaining each metric exposed from your application.


 #### How to implement [CounterVec](https://godoc.org/github.com/prometheus/client_golang/prometheus#CounterVec) in `metrics`?
--- a/vendor/github.com/VictoriaMetrics/metrics/metrics.go
+++ b/vendor/github.com/VictoriaMetrics/metrics/metrics.go
@ -110,3 +110,8 @@ func WriteFDMetrics(w io.Writer) {
 func UnregisterMetric(name string) bool {
 	return defaultSet.UnregisterMetric(name)
 }
+
+// ListMetricNames returns a list of all the metric names from default set.
+func ListMetricNames() []string {
+	return defaultSet.ListMetricNames()
+}
--- a/vendor/github.com/VictoriaMetrics/metrics/process_metrics_linux.go
+++ b/vendor/github.com/VictoriaMetrics/metrics/process_metrics_linux.go
@ -45,13 +45,13 @@ func writeProcessMetrics(w io.Writer) {
 	statFilepath := "/proc/self/stat"
 	data, err := ioutil.ReadFile(statFilepath)
 	if err != nil {
-		log.Printf("ERROR: cannot open %s: %s", statFilepath, err)
+		log.Printf("ERROR: metrics: cannot open %s: %s", statFilepath, err)
 		return
 	}
 	// Search for the end of command.
 	n := bytes.LastIndex(data, []byte(") "))
 	if n < 0 {
-		log.Printf("ERROR: cannot find command in parentheses in %q read from %s", data, statFilepath)
+		log.Printf("ERROR: metrics: cannot find command in parentheses in %q read from %s", data, statFilepath)
 		return
 	}
 	data = data[n+2:]
@ -62,7 +62,7 @@ func writeProcessMetrics(w io.Writer) {
 		&p.State, &p.Ppid, &p.Pgrp, &p.Session, &p.TtyNr, &p.Tpgid, &p.Flags, &p.Minflt, &p.Cminflt, &p.Majflt, &p.Cmajflt,
 		&p.Utime, &p.Stime, &p.Cutime, &p.Cstime, &p.Priority, &p.Nice, &p.NumThreads, &p.ItrealValue, &p.Starttime, &p.Vsize, &p.Rss)
 	if err != nil {
-		log.Printf("ERROR: cannot parse %q read from %s: %s", data, statFilepath, err)
+		log.Printf("ERROR: metrics: cannot parse %q read from %s: %s", data, statFilepath, err)
 		return
 	}

@ -89,17 +89,17 @@ func writeIOMetrics(w io.Writer) {
 	ioFilepath := "/proc/self/io"
 	data, err := ioutil.ReadFile(ioFilepath)
 	if err != nil {
-		log.Printf("ERROR: cannot open %q: %s", ioFilepath, err)
+		log.Printf("ERROR: metrics: cannot open %q: %s", ioFilepath, err)
 	}
 	getInt := func(s string) int64 {
 		n := strings.IndexByte(s, ' ')
 		if n < 0 {
-			log.Printf("ERROR: cannot find whitespace in %q at %q", s, ioFilepath)
+			log.Printf("ERROR: metrics: cannot find whitespace in %q at %q", s, ioFilepath)
 			return 0
 		}
 		v, err := strconv.ParseInt(s[n+1:], 10, 64)
 		if err != nil {
-			log.Printf("ERROR: cannot parse %q at %q: %s", s, ioFilepath, err)
+			log.Printf("ERROR: metrics: cannot parse %q at %q: %s", s, ioFilepath, err)
 			return 0
 		}
 		return v
@ -137,12 +137,12 @@ var startTimeSeconds = time.Now().Unix()
 func writeFDMetrics(w io.Writer) {
 	totalOpenFDs, err := getOpenFDsCount("/proc/self/fd")
 	if err != nil {
-		log.Printf("ERROR: cannot determine open file descriptors count: %s", err)
+		log.Printf("ERROR: metrics: cannot determine open file descriptors count: %s", err)
 		return
 	}
 	maxOpenFDs, err := getMaxFilesLimit("/proc/self/limits")
 	if err != nil {
-		log.Printf("ERROR: cannot determine the limit on open file descritors: %s", err)
+		log.Printf("ERROR: metrics: cannot determine the limit on open file descritors: %s", err)
 		return
 	}
 	fmt.Fprintf(w, "process_max_fds %d\n", maxOpenFDs)
@ -211,7 +211,7 @@ type memStats struct {
 func writeProcessMemMetrics(w io.Writer) {
 	ms, err := getMemStats("/proc/self/status")
 	if err != nil {
-		log.Printf("ERROR: cannot determine memory status: %s", err)
+		log.Printf("ERROR: metrics: cannot determine memory status: %s", err)
 		return
 	}
 	fmt.Fprintf(w, "process_virtual_memory_peak_bytes %d\n", ms.vmPeak)
--- a/vendor/github.com/VictoriaMetrics/metrics/process_metrics_other.go
+++ b/vendor/github.com/VictoriaMetrics/metrics/process_metrics_other.go
@ -1,3 +1,4 @@
+//go:build !linux
 // +build !linux

 package metrics
--- a/vendor/github.com/VictoriaMetrics/metrics/push.go
+++ b/vendor/github.com/VictoriaMetrics/metrics/push.go
@ -0,0 +1,184 @@
+package metrics
+
+import (
+	"bytes"
+	"fmt"
+	"io"
+	"io/ioutil"
+	"log"
+	"net/http"
+	"net/url"
+	"time"
+)
+
+// InitPushProcessMetrics sets up periodic push for 'process_*' metrics to the given pushURL with the given interval.
+//
+// extraLabels may contain comma-separated list of `label="value"` labels, which will be added
+// to all the metrics before pushing them to pushURL.
+//
+// The metrics are pushed to pushURL in Prometheus text exposition format.
+// See https://github.com/prometheus/docs/blob/main/content/docs/instrumenting/exposition_formats.md#text-based-format
+//
+// It is recommended pushing metrics to /api/v1/import/prometheus endpoint according to
+// https://docs.victoriametrics.com/#how-to-import-data-in-prometheus-exposition-format
+//
+// It is OK calling InitPushProcessMetrics multiple times with different pushURL -
+// in this case metrics are pushed to all the provided pushURL urls.
+func InitPushProcessMetrics(pushURL string, interval time.Duration, extraLabels string) error {
+	writeMetrics := func(w io.Writer) {
+		WriteProcessMetrics(w)
+	}
+	return InitPushExt(pushURL, interval, extraLabels, writeMetrics)
+}
+
+// InitPush sets up periodic push for globally registered metrics to the given pushURL with the given interval.
+//
+// extraLabels may contain comma-separated list of `label="value"` labels, which will be added
+// to all the metrics before pushing them to pushURL.
+//
+// If pushProcessMetrics is set to true, then 'process_*' metrics are also pushed to pushURL.
+//
+// The metrics are pushed to pushURL in Prometheus text exposition format.
+// See https://github.com/prometheus/docs/blob/main/content/docs/instrumenting/exposition_formats.md#text-based-format
+//
+// It is recommended pushing metrics to /api/v1/import/prometheus endpoint according to
+// https://docs.victoriametrics.com/#how-to-import-data-in-prometheus-exposition-format
+//
+// It is OK calling InitPush multiple times with different pushURL -
+// in this case metrics are pushed to all the provided pushURL urls.
+func InitPush(pushURL string, interval time.Duration, extraLabels string, pushProcessMetrics bool) error {
+	writeMetrics := func(w io.Writer) {
+		WritePrometheus(w, pushProcessMetrics)
+	}
+	return InitPushExt(pushURL, interval, extraLabels, writeMetrics)
+}
+
+// InitPush sets up periodic push for metrics from s to the given pushURL with the given interval.
+//
+// extraLabels may contain comma-separated list of `label="value"` labels, which will be added
+// to all the metrics before pushing them to pushURL.
+//
+/// The metrics are pushed to pushURL in Prometheus text exposition format.
+// See https://github.com/prometheus/docs/blob/main/content/docs/instrumenting/exposition_formats.md#text-based-format
+//
+// It is recommended pushing metrics to /api/v1/import/prometheus endpoint according to
+// https://docs.victoriametrics.com/#how-to-import-data-in-prometheus-exposition-format
+//
+// It is OK calling InitPush multiple times with different pushURL -
+// in this case metrics are pushed to all the provided pushURL urls.
+func (s *Set) InitPush(pushURL string, interval time.Duration, extraLabels string) error {
+	writeMetrics := func(w io.Writer) {
+		s.WritePrometheus(w)
+	}
+	return InitPushExt(pushURL, interval, extraLabels, writeMetrics)
+}
+
+// InitPushExt sets up periodic push for metrics obtained by calling writeMetrics with the given interval.
+//
+// extraLabels may contain comma-separated list of `label="value"` labels, which will be added
+// to all the metrics before pushing them to pushURL.
+//
+// The writeMetrics callback must write metrics to w in Prometheus text exposition format without timestamps and trailing comments.
+// See https://github.com/prometheus/docs/blob/main/content/docs/instrumenting/exposition_formats.md#text-based-format
+//
+// It is recommended pushing metrics to /api/v1/import/prometheus endpoint according to
+// https://docs.victoriametrics.com/#how-to-import-data-in-prometheus-exposition-format
+//
+// It is OK calling InitPushExt multiple times with different pushURL -
+// in this case metrics are pushed to all the provided pushURL urls.
+func InitPushExt(pushURL string, interval time.Duration, extraLabels string, writeMetrics func(w io.Writer)) error {
+	if interval <= 0 {
+		return fmt.Errorf("interval must be positive; got %s", interval)
+	}
+	if err := validateTags(extraLabels); err != nil {
+		return fmt.Errorf("invalid extraLabels=%q: %w", extraLabels, err)
+	}
+	pu, err := url.Parse(pushURL)
+	if err != nil {
+		return fmt.Errorf("cannot parse pushURL=%q: %w", pushURL, err)
+	}
+	if pu.Scheme != "http" && pu.Scheme != "https" {
+		return fmt.Errorf("unsupported scheme in pushURL=%q; expecting 'http' or 'https'", pushURL)
+	}
+	if pu.Host == "" {
+		return fmt.Errorf("missing host in pushURL=%q", pushURL)
+	}
+	pushURLRedacted := pu.Redacted()
+	c := &http.Client{
+		Timeout: interval,
+	}
+	go func() {
+		ticker := time.NewTicker(interval)
+		var bb bytes.Buffer
+		var tmpBuf []byte
+		for range ticker.C {
+			bb.Reset()
+			writeMetrics(&bb)
+			if len(extraLabels) > 0 {
+				tmpBuf = addExtraLabels(tmpBuf[:0], bb.Bytes(), extraLabels)
+				bb.Reset()
+				bb.Write(tmpBuf)
+			}
+			resp, err := c.Post(pushURL, "text/plain", &bb)
+			if err != nil {
+				log.Printf("ERROR: metrics.push: cannot push metrics to %q: %s", pushURLRedacted, err)
+				continue
+			}
+			if resp.StatusCode/100 != 2 {
+				body, _ := ioutil.ReadAll(resp.Body)
+				_ = resp.Body.Close()
+				log.Printf("ERROR: metrics.push: unexpected status code in response from %q: %d; expecting 2xx; response body: %q",
+					pushURLRedacted, resp.StatusCode, body)
+				continue
+			}
+			_ = resp.Body.Close()
+		}
+	}()
+	return nil
+}
+
+func addExtraLabels(dst, src []byte, extraLabels string) []byte {
+	for len(src) > 0 {
+		var line []byte
+		n := bytes.IndexByte(src, '\n')
+		if n >= 0 {
+			line = src[:n]
+			src = src[n+1:]
+		} else {
+			line = src
+			src = nil
+		}
+		line = bytes.TrimSpace(line)
+		if len(line) == 0 {
+			// Skip empy lines
+			continue
+		}
+		if bytes.HasPrefix(line, bashBytes) {
+			// Copy comments as is
+			dst = append(dst, line...)
+			dst = append(dst, '\n')
+			continue
+		}
+		n = bytes.IndexByte(line, '{')
+		if n >= 0 {
+			dst = append(dst, line[:n+1]...)
+			dst = append(dst, extraLabels...)
+			dst = append(dst, ',')
+			dst = append(dst, line[n+1:]...)
+		} else {
+			n = bytes.LastIndexByte(line, ' ')
+			if n < 0 {
+				panic(fmt.Errorf("BUG: missing whitespace between metric name and metric value in Prometheus text exposition line %q", line))
+			}
+			dst = append(dst, line[:n]...)
+			dst = append(dst, '{')
+			dst = append(dst, extraLabels...)
+			dst = append(dst, '}')
+			dst = append(dst, line[n:]...)
+		}
+		dst = append(dst, '\n')
+	}
+	return dst
+}
+
+var bashBytes = []byte("#")
--- a/vendor/github.com/aws/aws-sdk-go/aws/endpoints/defaults.go
+++ b/vendor/github.com/aws/aws-sdk-go/aws/endpoints/defaults.go
@ -6191,6 +6191,87 @@ var awsPartition = partition{
 				}: endpoint{},
 			},
 		},
+		"devops-guru": service{
+			Defaults: endpointDefaults{
+				defaultKey{}: endpoint{
+					Protocols: []string{"https"},
+				},
+			},
+			Endpoints: serviceEndpoints{
+				endpointKey{
+					Region: "ap-northeast-1",
+				}: endpoint{},
+				endpointKey{
+					Region: "ap-southeast-1",
+				}: endpoint{},
+				endpointKey{
+					Region: "ap-southeast-2",
+				}: endpoint{},
+				endpointKey{
+					Region: "eu-central-1",
+				}: endpoint{},
+				endpointKey{
+					Region: "eu-north-1",
+				}: endpoint{},
+				endpointKey{
+					Region: "eu-west-1",
+				}: endpoint{},
+				endpointKey{
+					Region: "fips-us-east-1",
+				}: endpoint{
+					Hostname: "devops-guru-fips.us-east-1.amazonaws.com",
+					CredentialScope: credentialScope{
+						Region: "us-east-1",
+					},
+					Deprecated: boxedTrue,
+				},
+				endpointKey{
+					Region: "fips-us-east-2",
+				}: endpoint{
+					Hostname: "devops-guru-fips.us-east-2.amazonaws.com",
+					CredentialScope: credentialScope{
+						Region: "us-east-2",
+					},
+					Deprecated: boxedTrue,
+				},
+				endpointKey{
+					Region: "fips-us-west-2",
+				}: endpoint{
+					Hostname: "devops-guru-fips.us-west-2.amazonaws.com",
+					CredentialScope: credentialScope{
+						Region: "us-west-2",
+					},
+					Deprecated: boxedTrue,
+				},
+				endpointKey{
+					Region: "us-east-1",
+				}: endpoint{},
+				endpointKey{
+					Region:  "us-east-1",
+					Variant: fipsVariant,
+				}: endpoint{
+					Hostname: "devops-guru-fips.us-east-1.amazonaws.com",
+				},
+				endpointKey{
+					Region: "us-east-2",
+				}: endpoint{},
+				endpointKey{
+					Region:  "us-east-2",
+					Variant: fipsVariant,
+				}: endpoint{
+					Hostname: "devops-guru-fips.us-east-2.amazonaws.com",
+				},
+				endpointKey{
+					Region: "us-west-2",
+				}: endpoint{},
+				endpointKey{
+					Region:  "us-west-2",
+					Variant: fipsVariant,
+				}: endpoint{
+					Hostname: "devops-guru-fips.us-west-2.amazonaws.com",
+				},
+			},
+		},
 		"directconnect": service{
 			Endpoints: serviceEndpoints{
 				endpointKey{
@ -21058,6 +21139,67 @@ var awsPartition = partition{
 				}: endpoint{},
 			},
 		},
+		"sso": service{
+			Endpoints: serviceEndpoints{
+				endpointKey{
+					Region: "ap-east-1",
+				}: endpoint{},
+				endpointKey{
+					Region: "ap-northeast-1",
+				}: endpoint{},
+				endpointKey{
+					Region: "ap-northeast-2",
+				}: endpoint{},
+				endpointKey{
+					Region: "ap-northeast-3",
+				}: endpoint{},
+				endpointKey{
+					Region: "ap-south-1",
+				}: endpoint{},
+				endpointKey{
+					Region: "ap-southeast-1",
+				}: endpoint{},
+				endpointKey{
+					Region: "ap-southeast-2",
+				}: endpoint{},
+				endpointKey{
+					Region: "ca-central-1",
+				}: endpoint{},
+				endpointKey{
+					Region: "eu-central-1",
+				}: endpoint{},
+				endpointKey{
+					Region: "eu-north-1",
+				}: endpoint{},
+				endpointKey{
+					Region: "eu-south-1",
+				}: endpoint{},
+				endpointKey{
+					Region: "eu-west-1",
+				}: endpoint{},
+				endpointKey{
+					Region: "eu-west-2",
+				}: endpoint{},
+				endpointKey{
+					Region: "eu-west-3",
+				}: endpoint{},
+				endpointKey{
+					Region: "me-south-1",
+				}: endpoint{},
+				endpointKey{
+					Region: "sa-east-1",
+				}: endpoint{},
+				endpointKey{
+					Region: "us-east-1",
+				}: endpoint{},
+				endpointKey{
+					Region: "us-east-2",
+				}: endpoint{},
+				endpointKey{
+					Region: "us-west-2",
+				}: endpoint{},
+			},
+		},
 		"states": service{
 			Endpoints: serviceEndpoints{
 				endpointKey{
@ -30192,6 +30334,26 @@ var awsusgovPartition = partition{
 				},
 			},
 		},
+		"sso": service{
+			Endpoints: serviceEndpoints{
+				endpointKey{
+					Region: "us-gov-east-1",
+				}: endpoint{
+					Hostname: "sso.us-gov-east-1.amazonaws.com",
+					CredentialScope: credentialScope{
+						Region: "us-gov-east-1",
+					},
+				},
+				endpointKey{
+					Region: "us-gov-west-1",
+				}: endpoint{
+					Hostname: "sso.us-gov-west-1.amazonaws.com",
+					CredentialScope: credentialScope{
+						Region: "us-gov-west-1",
+					},
+				},
+			},
+		},
 		"states": service{
 			Endpoints: serviceEndpoints{
 				endpointKey{
--- a/vendor/github.com/aws/aws-sdk-go/aws/version.go
+++ b/vendor/github.com/aws/aws-sdk-go/aws/version.go
@ -5,4 +5,4 @@ package aws
 const SDKName = "aws-sdk-go"

 // SDKVersion is the version of this SDK
-const SDKVersion = "1.44.53"
+const SDKVersion = "1.44.56"
--- a/vendor/golang.org/x/sys/unix/mkerrors.sh
+++ b/vendor/golang.org/x/sys/unix/mkerrors.sh
@ -203,6 +203,7 @@ struct ltchars {
 #include <sys/timerfd.h>
 #include <sys/uio.h>
 #include <sys/xattr.h>
+#include <linux/audit.h>
 #include <linux/bpf.h>
 #include <linux/can.h>
 #include <linux/can/error.h>
@ -554,6 +555,7 @@ ccflags="$@"
 		$2 ~ /^CLONE_[A-Z_]+/ ||
 		$2 !~ /^(BPF_TIMEVAL|BPF_FIB_LOOKUP_[A-Z]+)$/ &&
 		$2 ~ /^(BPF|DLT)_/ ||
+		$2 ~ /^AUDIT_/ ||
 		$2 ~ /^(CLOCK|TIMER)_/ ||
 		$2 ~ /^CAN_/ ||
 		$2 ~ /^CAP_/ ||
@ -576,7 +578,6 @@ ccflags="$@"
 		$2 ~ /^SEEK_/ ||
 		$2 ~ /^SPLICE_/ ||
 		$2 ~ /^SYNC_FILE_RANGE_/ ||
-		$2 !~ /^AUDIT_RECORD_MAGIC/ &&
 		$2 !~ /IOC_MAGIC/ &&
 		$2 ~ /^[A-Z][A-Z0-9_]+_MAGIC2?$/ ||
 		$2 ~ /^(VM|VMADDR)_/ ||
--- a/vendor/golang.org/x/sys/unix/zerrors_linux.go
+++ b/vendor/golang.org/x/sys/unix/zerrors_linux.go
@ -140,6 +140,306 @@ const (
 	ARPHRD_VOID                                 = 0xffff
 	ARPHRD_VSOCKMON                             = 0x33a
 	ARPHRD_X25                                  = 0x10f
+	AUDIT_ADD                                   = 0x3eb
+	AUDIT_ADD_RULE                              = 0x3f3
+	AUDIT_ALWAYS                                = 0x2
+	AUDIT_ANOM_ABEND                            = 0x6a5
+	AUDIT_ANOM_CREAT                            = 0x6a7
+	AUDIT_ANOM_LINK                             = 0x6a6
+	AUDIT_ANOM_PROMISCUOUS                      = 0x6a4
+	AUDIT_ARCH                                  = 0xb
+	AUDIT_ARCH_AARCH64                          = 0xc00000b7
+	AUDIT_ARCH_ALPHA                            = 0xc0009026
+	AUDIT_ARCH_ARCOMPACT                        = 0x4000005d
+	AUDIT_ARCH_ARCOMPACTBE                      = 0x5d
+	AUDIT_ARCH_ARCV2                            = 0x400000c3
+	AUDIT_ARCH_ARCV2BE                          = 0xc3
+	AUDIT_ARCH_ARM                              = 0x40000028
+	AUDIT_ARCH_ARMEB                            = 0x28
+	AUDIT_ARCH_C6X                              = 0x4000008c
+	AUDIT_ARCH_C6XBE                            = 0x8c
+	AUDIT_ARCH_CRIS                             = 0x4000004c
+	AUDIT_ARCH_CSKY                             = 0x400000fc
+	AUDIT_ARCH_FRV                              = 0x5441
+	AUDIT_ARCH_H8300                            = 0x2e
+	AUDIT_ARCH_HEXAGON                          = 0xa4
+	AUDIT_ARCH_I386                             = 0x40000003
+	AUDIT_ARCH_IA64                             = 0xc0000032
+	AUDIT_ARCH_LOONGARCH32                      = 0x40000102
+	AUDIT_ARCH_LOONGARCH64                      = 0xc0000102
+	AUDIT_ARCH_M32R                             = 0x58
+	AUDIT_ARCH_M68K                             = 0x4
+	AUDIT_ARCH_MICROBLAZE                       = 0xbd
+	AUDIT_ARCH_MIPS                             = 0x8
+	AUDIT_ARCH_MIPS64                           = 0x80000008
+	AUDIT_ARCH_MIPS64N32                        = 0xa0000008
+	AUDIT_ARCH_MIPSEL                           = 0x40000008
+	AUDIT_ARCH_MIPSEL64                         = 0xc0000008
+	AUDIT_ARCH_MIPSEL64N32                      = 0xe0000008
+	AUDIT_ARCH_NDS32                            = 0x400000a7
+	AUDIT_ARCH_NDS32BE                          = 0xa7
+	AUDIT_ARCH_NIOS2                            = 0x40000071
+	AUDIT_ARCH_OPENRISC                         = 0x5c
+	AUDIT_ARCH_PARISC                           = 0xf
+	AUDIT_ARCH_PARISC64                         = 0x8000000f
+	AUDIT_ARCH_PPC                              = 0x14
+	AUDIT_ARCH_PPC64                            = 0x80000015
+	AUDIT_ARCH_PPC64LE                          = 0xc0000015
+	AUDIT_ARCH_RISCV32                          = 0x400000f3
+	AUDIT_ARCH_RISCV64                          = 0xc00000f3
+	AUDIT_ARCH_S390                             = 0x16
+	AUDIT_ARCH_S390X                            = 0x80000016
+	AUDIT_ARCH_SH                               = 0x2a
+	AUDIT_ARCH_SH64                             = 0x8000002a
+	AUDIT_ARCH_SHEL                             = 0x4000002a
+	AUDIT_ARCH_SHEL64                           = 0xc000002a
+	AUDIT_ARCH_SPARC                            = 0x2
+	AUDIT_ARCH_SPARC64                          = 0x8000002b
+	AUDIT_ARCH_TILEGX                           = 0xc00000bf
+	AUDIT_ARCH_TILEGX32                         = 0x400000bf
+	AUDIT_ARCH_TILEPRO                          = 0x400000bc
+	AUDIT_ARCH_UNICORE                          = 0x4000006e
+	AUDIT_ARCH_X86_64                           = 0xc000003e
+	AUDIT_ARCH_XTENSA                           = 0x5e
+	AUDIT_ARG0                                  = 0xc8
+	AUDIT_ARG1                                  = 0xc9
+	AUDIT_ARG2                                  = 0xca
+	AUDIT_ARG3                                  = 0xcb
+	AUDIT_AVC                                   = 0x578
+	AUDIT_AVC_PATH                              = 0x57a
+	AUDIT_BITMASK_SIZE                          = 0x40
+	AUDIT_BIT_MASK                              = 0x8000000
+	AUDIT_BIT_TEST                              = 0x48000000
+	AUDIT_BPF                                   = 0x536
+	AUDIT_BPRM_FCAPS                            = 0x529
+	AUDIT_CAPSET                                = 0x52a
+	AUDIT_CLASS_CHATTR                          = 0x2
+	AUDIT_CLASS_CHATTR_32                       = 0x3
+	AUDIT_CLASS_DIR_WRITE                       = 0x0
+	AUDIT_CLASS_DIR_WRITE_32                    = 0x1
+	AUDIT_CLASS_READ                            = 0x4
+	AUDIT_CLASS_READ_32                         = 0x5
+	AUDIT_CLASS_SIGNAL                          = 0x8
+	AUDIT_CLASS_SIGNAL_32                       = 0x9
+	AUDIT_CLASS_WRITE                           = 0x6
+	AUDIT_CLASS_WRITE_32                        = 0x7
+	AUDIT_COMPARE_AUID_TO_EUID                  = 0x10
+	AUDIT_COMPARE_AUID_TO_FSUID                 = 0xe
+	AUDIT_COMPARE_AUID_TO_OBJ_UID               = 0x5
+	AUDIT_COMPARE_AUID_TO_SUID                  = 0xf
+	AUDIT_COMPARE_EGID_TO_FSGID                 = 0x17
+	AUDIT_COMPARE_EGID_TO_OBJ_GID               = 0x4
+	AUDIT_COMPARE_EGID_TO_SGID                  = 0x18
+	AUDIT_COMPARE_EUID_TO_FSUID                 = 0x12
+	AUDIT_COMPARE_EUID_TO_OBJ_UID               = 0x3
+	AUDIT_COMPARE_EUID_TO_SUID                  = 0x11
+	AUDIT_COMPARE_FSGID_TO_OBJ_GID              = 0x9
+	AUDIT_COMPARE_FSUID_TO_OBJ_UID              = 0x8
+	AUDIT_COMPARE_GID_TO_EGID                   = 0x14
+	AUDIT_COMPARE_GID_TO_FSGID                  = 0x15
+	AUDIT_COMPARE_GID_TO_OBJ_GID                = 0x2
+	AUDIT_COMPARE_GID_TO_SGID                   = 0x16
+	AUDIT_COMPARE_SGID_TO_FSGID                 = 0x19
+	AUDIT_COMPARE_SGID_TO_OBJ_GID               = 0x7
+	AUDIT_COMPARE_SUID_TO_FSUID                 = 0x13
+	AUDIT_COMPARE_SUID_TO_OBJ_UID               = 0x6
+	AUDIT_COMPARE_UID_TO_AUID                   = 0xa
+	AUDIT_COMPARE_UID_TO_EUID                   = 0xb
+	AUDIT_COMPARE_UID_TO_FSUID                  = 0xc
+	AUDIT_COMPARE_UID_TO_OBJ_UID                = 0x1
+	AUDIT_COMPARE_UID_TO_SUID                   = 0xd
+	AUDIT_CONFIG_CHANGE                         = 0x519
+	AUDIT_CWD                                   = 0x51b
+	AUDIT_DAEMON_ABORT                          = 0x4b2
+	AUDIT_DAEMON_CONFIG                         = 0x4b3
+	AUDIT_DAEMON_END                            = 0x4b1
+	AUDIT_DAEMON_START                          = 0x4b0
+	AUDIT_DEL                                   = 0x3ec
+	AUDIT_DEL_RULE                              = 0x3f4
+	AUDIT_DEVMAJOR                              = 0x64
+	AUDIT_DEVMINOR                              = 0x65
+	AUDIT_DIR                                   = 0x6b
+	AUDIT_DM_CTRL                               = 0x53a
+	AUDIT_DM_EVENT                              = 0x53b
+	AUDIT_EGID                                  = 0x6
+	AUDIT_EOE                                   = 0x528
+	AUDIT_EQUAL                                 = 0x40000000
+	AUDIT_EUID                                  = 0x2
+	AUDIT_EVENT_LISTENER                        = 0x537
+	AUDIT_EXE                                   = 0x70
+	AUDIT_EXECVE                                = 0x51d
+	AUDIT_EXIT                                  = 0x67
+	AUDIT_FAIL_PANIC                            = 0x2
+	AUDIT_FAIL_PRINTK                           = 0x1
+	AUDIT_FAIL_SILENT                           = 0x0
+	AUDIT_FANOTIFY                              = 0x533
+	AUDIT_FD_PAIR                               = 0x525
+	AUDIT_FEATURE_BITMAP_ALL                    = 0x7f
+	AUDIT_FEATURE_BITMAP_BACKLOG_LIMIT          = 0x1
+	AUDIT_FEATURE_BITMAP_BACKLOG_WAIT_TIME      = 0x2
+	AUDIT_FEATURE_BITMAP_EXCLUDE_EXTEND         = 0x8
+	AUDIT_FEATURE_BITMAP_EXECUTABLE_PATH        = 0x4
+	AUDIT_FEATURE_BITMAP_FILTER_FS              = 0x40
+	AUDIT_FEATURE_BITMAP_LOST_RESET             = 0x20
+	AUDIT_FEATURE_BITMAP_SESSIONID_FILTER       = 0x10
+	AUDIT_FEATURE_CHANGE                        = 0x530
+	AUDIT_FEATURE_LOGINUID_IMMUTABLE            = 0x1
+	AUDIT_FEATURE_ONLY_UNSET_LOGINUID           = 0x0
+	AUDIT_FEATURE_VERSION                       = 0x1
+	AUDIT_FIELD_COMPARE                         = 0x6f
+	AUDIT_FILETYPE                              = 0x6c
+	AUDIT_FILTERKEY                             = 0xd2
+	AUDIT_FILTER_ENTRY                          = 0x2
+	AUDIT_FILTER_EXCLUDE                        = 0x5
+	AUDIT_FILTER_EXIT                           = 0x4
+	AUDIT_FILTER_FS                             = 0x6
+	AUDIT_FILTER_PREPEND                        = 0x10
+	AUDIT_FILTER_TASK                           = 0x1
+	AUDIT_FILTER_TYPE                           = 0x5
+	AUDIT_FILTER_URING_EXIT                     = 0x7
+	AUDIT_FILTER_USER                           = 0x0
+	AUDIT_FILTER_WATCH                          = 0x3
+	AUDIT_FIRST_KERN_ANOM_MSG                   = 0x6a4
+	AUDIT_FIRST_USER_MSG                        = 0x44c
+	AUDIT_FIRST_USER_MSG2                       = 0x834
+	AUDIT_FSGID                                 = 0x8
+	AUDIT_FSTYPE                                = 0x1a
+	AUDIT_FSUID                                 = 0x4
+	AUDIT_GET                                   = 0x3e8
+	AUDIT_GET_FEATURE                           = 0x3fb
+	AUDIT_GID                                   = 0x5
+	AUDIT_GREATER_THAN                          = 0x20000000
+	AUDIT_GREATER_THAN_OR_EQUAL                 = 0x60000000
+	AUDIT_INODE                                 = 0x66
+	AUDIT_INTEGRITY_DATA                        = 0x708
+	AUDIT_INTEGRITY_EVM_XATTR                   = 0x70e
+	AUDIT_INTEGRITY_HASH                        = 0x70b
+	AUDIT_INTEGRITY_METADATA                    = 0x709
+	AUDIT_INTEGRITY_PCR                         = 0x70c
+	AUDIT_INTEGRITY_POLICY_RULE                 = 0x70f
+	AUDIT_INTEGRITY_RULE                        = 0x70d
+	AUDIT_INTEGRITY_STATUS                      = 0x70a
+	AUDIT_IPC                                   = 0x517
+	AUDIT_IPC_SET_PERM                          = 0x51f
+	AUDIT_KERNEL                                = 0x7d0
+	AUDIT_KERNEL_OTHER                          = 0x524
+	AUDIT_KERN_MODULE                           = 0x532
+	AUDIT_LAST_FEATURE                          = 0x1
+	AUDIT_LAST_KERN_ANOM_MSG                    = 0x707
+	AUDIT_LAST_USER_MSG                         = 0x4af
+	AUDIT_LAST_USER_MSG2                        = 0xbb7
+	AUDIT_LESS_THAN                             = 0x10000000
+	AUDIT_LESS_THAN_OR_EQUAL                    = 0x50000000
+	AUDIT_LIST                                  = 0x3ea
+	AUDIT_LIST_RULES                            = 0x3f5
+	AUDIT_LOGIN                                 = 0x3ee
+	AUDIT_LOGINUID                              = 0x9
+	AUDIT_LOGINUID_SET                          = 0x18
+	AUDIT_MAC_CALIPSO_ADD                       = 0x58a
+	AUDIT_MAC_CALIPSO_DEL                       = 0x58b
+	AUDIT_MAC_CIPSOV4_ADD                       = 0x57f
+	AUDIT_MAC_CIPSOV4_DEL                       = 0x580
+	AUDIT_MAC_CONFIG_CHANGE                     = 0x57d
+	AUDIT_MAC_IPSEC_ADDSA                       = 0x583
+	AUDIT_MAC_IPSEC_ADDSPD                      = 0x585
+	AUDIT_MAC_IPSEC_DELSA                       = 0x584
+	AUDIT_MAC_IPSEC_DELSPD                      = 0x586
+	AUDIT_MAC_IPSEC_EVENT                       = 0x587
+	AUDIT_MAC_MAP_ADD                           = 0x581
+	AUDIT_MAC_MAP_DEL                           = 0x582
+	AUDIT_MAC_POLICY_LOAD                       = 0x57b
+	AUDIT_MAC_STATUS                            = 0x57c
+	AUDIT_MAC_UNLBL_ALLOW                       = 0x57e
+	AUDIT_MAC_UNLBL_STCADD                      = 0x588
+	AUDIT_MAC_UNLBL_STCDEL                      = 0x589
+	AUDIT_MAKE_EQUIV                            = 0x3f7
+	AUDIT_MAX_FIELDS                            = 0x40
+	AUDIT_MAX_FIELD_COMPARE                     = 0x19
+	AUDIT_MAX_KEY_LEN                           = 0x100
+	AUDIT_MESSAGE_TEXT_MAX                      = 0x2170
+	AUDIT_MMAP                                  = 0x52b
+	AUDIT_MQ_GETSETATTR                         = 0x523
+	AUDIT_MQ_NOTIFY                             = 0x522
+	AUDIT_MQ_OPEN                               = 0x520
+	AUDIT_MQ_SENDRECV                           = 0x521
+	AUDIT_MSGTYPE                               = 0xc
+	AUDIT_NEGATE                                = 0x80000000
+	AUDIT_NETFILTER_CFG                         = 0x52d
+	AUDIT_NETFILTER_PKT                         = 0x52c
+	AUDIT_NEVER                                 = 0x0
+	AUDIT_NLGRP_MAX                             = 0x1
+	AUDIT_NOT_EQUAL                             = 0x30000000
+	AUDIT_NR_FILTERS                            = 0x8
+	AUDIT_OBJ_GID                               = 0x6e
+	AUDIT_OBJ_LEV_HIGH                          = 0x17
+	AUDIT_OBJ_LEV_LOW                           = 0x16
+	AUDIT_OBJ_PID                               = 0x526
+	AUDIT_OBJ_ROLE                              = 0x14
+	AUDIT_OBJ_TYPE                              = 0x15
+	AUDIT_OBJ_UID                               = 0x6d
+	AUDIT_OBJ_USER                              = 0x13
+	AUDIT_OPENAT2                               = 0x539
+	AUDIT_OPERATORS                             = 0x78000000
+	AUDIT_PATH                                  = 0x516
+	AUDIT_PERM                                  = 0x6a
+	AUDIT_PERM_ATTR                             = 0x8
+	AUDIT_PERM_EXEC                             = 0x1
+	AUDIT_PERM_READ                             = 0x4
+	AUDIT_PERM_WRITE                            = 0x2
+	AUDIT_PERS                                  = 0xa
+	AUDIT_PID                                   = 0x0
+	AUDIT_POSSIBLE                              = 0x1
+	AUDIT_PPID                                  = 0x12
+	AUDIT_PROCTITLE                             = 0x52f
+	AUDIT_REPLACE                               = 0x531
+	AUDIT_SADDR_FAM                             = 0x71
+	AUDIT_SECCOMP                               = 0x52e
+	AUDIT_SELINUX_ERR                           = 0x579
+	AUDIT_SESSIONID                             = 0x19
+	AUDIT_SET                                   = 0x3e9
+	AUDIT_SET_FEATURE                           = 0x3fa
+	AUDIT_SGID                                  = 0x7
+	AUDIT_SID_UNSET                             = 0xffffffff
+	AUDIT_SIGNAL_INFO                           = 0x3f2
+	AUDIT_SOCKADDR                              = 0x51a
+	AUDIT_SOCKETCALL                            = 0x518
+	AUDIT_STATUS_BACKLOG_LIMIT                  = 0x10
+	AUDIT_STATUS_BACKLOG_WAIT_TIME              = 0x20
+	AUDIT_STATUS_BACKLOG_WAIT_TIME_ACTUAL       = 0x80
+	AUDIT_STATUS_ENABLED                        = 0x1
+	AUDIT_STATUS_FAILURE                        = 0x2
+	AUDIT_STATUS_LOST                           = 0x40
+	AUDIT_STATUS_PID                            = 0x4
+	AUDIT_STATUS_RATE_LIMIT                     = 0x8
+	AUDIT_SUBJ_CLR                              = 0x11
+	AUDIT_SUBJ_ROLE                             = 0xe
+	AUDIT_SUBJ_SEN                              = 0x10
+	AUDIT_SUBJ_TYPE                             = 0xf
+	AUDIT_SUBJ_USER                             = 0xd
+	AUDIT_SUCCESS                               = 0x68
+	AUDIT_SUID                                  = 0x3
+	AUDIT_SYSCALL                               = 0x514
+	AUDIT_SYSCALL_CLASSES                       = 0x10
+	AUDIT_TIME_ADJNTPVAL                        = 0x535
+	AUDIT_TIME_INJOFFSET                        = 0x534
+	AUDIT_TRIM                                  = 0x3f6
+	AUDIT_TTY                                   = 0x527
+	AUDIT_TTY_GET                               = 0x3f8
+	AUDIT_TTY_SET                               = 0x3f9
+	AUDIT_UID                                   = 0x1
+	AUDIT_UID_UNSET                             = 0xffffffff
+	AUDIT_UNUSED_BITS                           = 0x7fffc00
+	AUDIT_URINGOP                               = 0x538
+	AUDIT_USER                                  = 0x3ed
+	AUDIT_USER_AVC                              = 0x453
+	AUDIT_USER_TTY                              = 0x464
+	AUDIT_VERSION_BACKLOG_LIMIT                 = 0x1
+	AUDIT_VERSION_BACKLOG_WAIT_TIME             = 0x2
+	AUDIT_VERSION_LATEST                        = 0x7f
+	AUDIT_WATCH                                 = 0x69
+	AUDIT_WATCH_INS                             = 0x3ef
+	AUDIT_WATCH_LIST                            = 0x3f1
+	AUDIT_WATCH_REM                             = 0x3f0
 	AUTOFS_SUPER_MAGIC                          = 0x187
 	B0                                          = 0x0
 	B110                                        = 0x3
@ -538,6 +838,55 @@ const (
 	EFD_SEMAPHORE                               = 0x1
 	EFIVARFS_MAGIC                              = 0xde5e81e4
 	EFS_SUPER_MAGIC                             = 0x414a53
+	EM_386                                      = 0x3
+	EM_486                                      = 0x6
+	EM_68K                                      = 0x4
+	EM_860                                      = 0x7
+	EM_88K                                      = 0x5
+	EM_AARCH64                                  = 0xb7
+	EM_ALPHA                                    = 0x9026
+	EM_ALTERA_NIOS2                             = 0x71
+	EM_ARCOMPACT                                = 0x5d
+	EM_ARCV2                                    = 0xc3
+	EM_ARM                                      = 0x28
+	EM_BLACKFIN                                 = 0x6a
+	EM_BPF                                      = 0xf7
+	EM_CRIS                                     = 0x4c
+	EM_CSKY                                     = 0xfc
+	EM_CYGNUS_M32R                              = 0x9041
+	EM_CYGNUS_MN10300                           = 0xbeef
+	EM_FRV                                      = 0x5441
+	EM_H8_300                                   = 0x2e
+	EM_HEXAGON                                  = 0xa4
+	EM_IA_64                                    = 0x32
+	EM_LOONGARCH                                = 0x102
+	EM_M32                                      = 0x1
+	EM_M32R                                     = 0x58
+	EM_MICROBLAZE                               = 0xbd
+	EM_MIPS                                     = 0x8
+	EM_MIPS_RS3_LE                              = 0xa
+	EM_MIPS_RS4_BE                              = 0xa
+	EM_MN10300                                  = 0x59
+	EM_NDS32                                    = 0xa7
+	EM_NONE                                     = 0x0
+	EM_OPENRISC                                 = 0x5c
+	EM_PARISC                                   = 0xf
+	EM_PPC                                      = 0x14
+	EM_PPC64                                    = 0x15
+	EM_RISCV                                    = 0xf3
+	EM_S390                                     = 0x16
+	EM_S390_OLD                                 = 0xa390
+	EM_SH                                       = 0x2a
+	EM_SPARC                                    = 0x2
+	EM_SPARC32PLUS                              = 0x12
+	EM_SPARCV9                                  = 0x2b
+	EM_SPU                                      = 0x17
+	EM_TILEGX                                   = 0xbf
+	EM_TILEPRO                                  = 0xbc
+	EM_TI_C6000                                 = 0x8c
+	EM_UNICORE                                  = 0x6e
+	EM_X86_64                                   = 0x3e
+	EM_XTENSA                                   = 0x5e
 	ENCODING_DEFAULT                            = 0x0
 	ENCODING_FM_MARK                            = 0x3
 	ENCODING_FM_SPACE                           = 0x4
--- a/vendor/golang.org/x/sys/unix/ztypes_linux.go
+++ b/vendor/golang.org/x/sys/unix/ztypes_linux.go
@ -5594,3 +5594,8 @@ const (
 	FR_ACT_UNREACHABLE     = 0x7
 	FR_ACT_PROHIBIT        = 0x8
 )
+
+const (
+	AUDIT_NLGRP_NONE    = 0x0
+	AUDIT_NLGRP_READLOG = 0x1
+)
--- a/vendor/modules.txt
+++ b/vendor/modules.txt
@ -24,7 +24,7 @@ github.com/VictoriaMetrics/fastcache
 github.com/VictoriaMetrics/fasthttp
 github.com/VictoriaMetrics/fasthttp/fasthttputil
 github.com/VictoriaMetrics/fasthttp/stackless
-# github.com/VictoriaMetrics/metrics v1.18.1
+# github.com/VictoriaMetrics/metrics v1.19.3
 ## explicit; go 1.12
 github.com/VictoriaMetrics/metrics
 # github.com/VictoriaMetrics/metricsql v0.44.1
@ -34,7 +34,7 @@ github.com/VictoriaMetrics/metricsql/binaryop
 # github.com/VividCortex/ewma v1.2.0
 ## explicit; go 1.12
 github.com/VividCortex/ewma
-# github.com/aws/aws-sdk-go v1.44.53
+# github.com/aws/aws-sdk-go v1.44.56
 ## explicit; go 1.11
 github.com/aws/aws-sdk-go/aws
 github.com/aws/aws-sdk-go/aws/arn
@ -306,7 +306,7 @@ golang.org/x/oauth2/jwt
 # golang.org/x/sync v0.0.0-20220601150217-0de741cfad7f
 ## explicit
 golang.org/x/sync/errgroup
-# golang.org/x/sys v0.0.0-20220712014510-0a85c31ab51e
+# golang.org/x/sys v0.0.0-20220715151400-c0bba94af5f8
 ## explicit; go 1.17
 golang.org/x/sys/internal/unsafeheader
 golang.org/x/sys/unix
@ -354,8 +354,8 @@ google.golang.org/appengine/internal/socket
 google.golang.org/appengine/internal/urlfetch
 google.golang.org/appengine/socket
 google.golang.org/appengine/urlfetch
-# google.golang.org/genproto v0.0.0-20220712132514-bdd2acd4974d
-## explicit; go 1.15
+# google.golang.org/genproto v0.0.0-20220715211116-798f69b842b9
+## explicit; go 1.17
 google.golang.org/genproto/googleapis/api/annotations
 google.golang.org/genproto/googleapis/iam/v1
 google.golang.org/genproto/googleapis/rpc/code