diff --git a/go.mod b/go.mod index d3978d052..7f1bdb37c 100644 --- a/go.mod +++ b/go.mod @@ -29,7 +29,7 @@ require ( github.com/valyala/fastjson v1.6.4 github.com/valyala/fastrand v1.1.0 github.com/valyala/fasttemplate v1.2.2 - github.com/valyala/gozstd v1.18.0 + github.com/valyala/gozstd v1.19.0 github.com/valyala/histogram v1.2.0 github.com/valyala/quicktemplate v1.7.0 golang.org/x/net v0.8.0 diff --git a/go.sum b/go.sum index b88a42e69..b97d92f88 100644 --- a/go.sum +++ b/go.sum @@ -425,8 +425,8 @@ github.com/valyala/fastrand v1.1.0 h1:f+5HkLW4rsgzdNoleUOB69hyT9IlD2ZQh9GyDMfb5G github.com/valyala/fastrand v1.1.0/go.mod h1:HWqCzkrkg6QXT8V2EXWvXCoow7vLwOFN002oeRzjapQ= github.com/valyala/fasttemplate v1.2.2 h1:lxLXG0uE3Qnshl9QyaK6XJxMXlQZELvChBOCmQD0Loo= github.com/valyala/fasttemplate v1.2.2/go.mod h1:KHLXt3tVN2HBp8eijSv/kGJopbvo7S+qRAEEKiv+SiQ= -github.com/valyala/gozstd v1.18.0 h1:f4BskcUZBnDrEJ2F+lVbNCMGOFBoGHEw71RBkCNR4IM= -github.com/valyala/gozstd v1.18.0/go.mod h1:y5Ew47GLlP37EkTB+B4s7r6A5rdaeB7ftbl9zoYiIPQ= +github.com/valyala/gozstd v1.19.0 h1:BS0M7sH3dcuyw2SQBrTLprAdGuNxfiH0c4IAM8kX07c= +github.com/valyala/gozstd v1.19.0/go.mod h1:y5Ew47GLlP37EkTB+B4s7r6A5rdaeB7ftbl9zoYiIPQ= github.com/valyala/histogram v1.2.0 h1:wyYGAZZt3CpwUiIb9AU/Zbllg1llXyrtApRS815OLoQ= github.com/valyala/histogram v1.2.0/go.mod h1:Hb4kBwb4UxsaNbbbh+RRz8ZR6pdodR57tzWUS3BUzXY= github.com/valyala/quicktemplate v1.7.0 h1:LUPTJmlVcb46OOUY3IeD9DojFpAVbsG+5WFTcjMJzCM= diff --git a/vendor/github.com/valyala/gozstd/Makefile b/vendor/github.com/valyala/gozstd/Makefile index 2dcc40c7d..b7f1372d3 100644 --- a/vendor/github.com/valyala/gozstd/Makefile +++ b/vendor/github.com/valyala/gozstd/Makefile @@ -3,7 +3,7 @@ GOARCH ?= $(shell go env GOARCH) GOOS_GOARCH := $(GOOS)_$(GOARCH) GOOS_GOARCH_NATIVE := $(shell go env GOHOSTOS)_$(shell go env GOHOSTARCH) LIBZSTD_NAME := libzstd_$(GOOS_GOARCH).a -ZSTD_VERSION ?= v1.5.4 +ZSTD_VERSION ?= v1.5.5 MUSL_BUILDER_IMAGE=golang:1.20.1-alpine BUILDER_IMAGE := local/builder_musl:2.0.0-$(shell echo $(MUSL_BUILDER_IMAGE) | tr : _)-1 diff --git a/vendor/github.com/valyala/gozstd/libzstd_linux_amd64.a b/vendor/github.com/valyala/gozstd/libzstd_linux_amd64.a index 7379e5bd1..40446a8be 100644 Binary files a/vendor/github.com/valyala/gozstd/libzstd_linux_amd64.a and b/vendor/github.com/valyala/gozstd/libzstd_linux_amd64.a differ diff --git a/vendor/github.com/valyala/gozstd/libzstd_linux_arm.a b/vendor/github.com/valyala/gozstd/libzstd_linux_arm.a index ccc501a40..6ecca1de0 100644 Binary files a/vendor/github.com/valyala/gozstd/libzstd_linux_arm.a and b/vendor/github.com/valyala/gozstd/libzstd_linux_arm.a differ diff --git a/vendor/github.com/valyala/gozstd/libzstd_linux_arm64.a b/vendor/github.com/valyala/gozstd/libzstd_linux_arm64.a index fd95bd829..af70e8e1c 100644 Binary files a/vendor/github.com/valyala/gozstd/libzstd_linux_arm64.a and b/vendor/github.com/valyala/gozstd/libzstd_linux_arm64.a differ diff --git a/vendor/github.com/valyala/gozstd/libzstd_linux_musl_amd64.a b/vendor/github.com/valyala/gozstd/libzstd_linux_musl_amd64.a index 2d387d649..9efa3a11e 100644 Binary files a/vendor/github.com/valyala/gozstd/libzstd_linux_musl_amd64.a and b/vendor/github.com/valyala/gozstd/libzstd_linux_musl_amd64.a differ diff --git a/vendor/github.com/valyala/gozstd/libzstd_linux_musl_arm64.a b/vendor/github.com/valyala/gozstd/libzstd_linux_musl_arm64.a index f82862d04..efcbce913 100644 Binary files a/vendor/github.com/valyala/gozstd/libzstd_linux_musl_arm64.a and b/vendor/github.com/valyala/gozstd/libzstd_linux_musl_arm64.a differ diff --git a/vendor/github.com/valyala/gozstd/zstd.h b/vendor/github.com/valyala/gozstd/zstd.h index 95aac0737..e5c3f8b68 100644 --- a/vendor/github.com/valyala/gozstd/zstd.h +++ b/vendor/github.com/valyala/gozstd/zstd.h @@ -106,7 +106,7 @@ extern "C" { /*------ Version ------*/ #define ZSTD_VERSION_MAJOR 1 #define ZSTD_VERSION_MINOR 5 -#define ZSTD_VERSION_RELEASE 4 +#define ZSTD_VERSION_RELEASE 5 #define ZSTD_VERSION_NUMBER (ZSTD_VERSION_MAJOR *100*100 + ZSTD_VERSION_MINOR *100 + ZSTD_VERSION_RELEASE) /*! ZSTD_versionNumber() : @@ -148,7 +148,8 @@ ZSTDLIB_API const char* ZSTD_versionString(void); ***************************************/ /*! ZSTD_compress() : * Compresses `src` content as a single zstd compressed frame into already allocated `dst`. - * Hint : compression runs faster if `dstCapacity` >= `ZSTD_compressBound(srcSize)`. + * NOTE: Providing `dstCapacity >= ZSTD_compressBound(srcSize)` guarantees that zstd will have + * enough space to successfully compress the data. * @return : compressed size written into `dst` (<= `dstCapacity), * or an error code if it fails (which can be tested using ZSTD_isError()). */ ZSTDLIB_API size_t ZSTD_compress( void* dst, size_t dstCapacity, @@ -578,7 +579,8 @@ ZSTDLIB_API size_t ZSTD_CCtx_reset(ZSTD_CCtx* cctx, ZSTD_ResetDirective reset); * Should cctx hold data from a previously unfinished frame, everything about it is forgotten. * - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*() * - The function is always blocking, returns when compression is completed. - * Hint : compression runs faster if `dstCapacity` >= `ZSTD_compressBound(srcSize)`. + * NOTE: Providing `dstCapacity >= ZSTD_compressBound(srcSize)` guarantees that zstd will have + * enough space to successfully compress the data, though it is possible it fails for other reasons. * @return : compressed size written into `dst` (<= `dstCapacity), * or an error code if it fails (which can be tested using ZSTD_isError()). */ @@ -1018,9 +1020,11 @@ ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize); * Advanced dictionary and prefix API (Requires v1.4.0+) * * This API allows dictionaries to be used with ZSTD_compress2(), - * ZSTD_compressStream2(), and ZSTD_decompressDCtx(). Dictionaries are sticky, and - * only reset with the context is reset with ZSTD_reset_parameters or - * ZSTD_reset_session_and_parameters. Prefixes are single-use. + * ZSTD_compressStream2(), and ZSTD_decompressDCtx(). + * Dictionaries are sticky, they remain valid when same context is re-used, + * they only reset when the context is reset + * with ZSTD_reset_parameters or ZSTD_reset_session_and_parameters. + * In contrast, Prefixes are single-use. ******************************************************************************/ @@ -1041,7 +1045,11 @@ ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize); * Use experimental ZSTD_CCtx_loadDictionary_byReference() to reference content instead. * In such a case, dictionary buffer must outlive its users. * Note 4 : Use ZSTD_CCtx_loadDictionary_advanced() - * to precisely select how dictionary content must be interpreted. */ + * to precisely select how dictionary content must be interpreted. + * Note 5 : This method does not benefit from LDM (long distance mode). + * If you want to employ LDM on some large dictionary content, + * prefer employing ZSTD_CCtx_refPrefix() described below. + */ ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary(ZSTD_CCtx* cctx, const void* dict, size_t dictSize); /*! ZSTD_CCtx_refCDict() : Requires v1.4.0+ @@ -1064,6 +1072,7 @@ ZSTDLIB_API size_t ZSTD_CCtx_refCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); * Decompression will need same prefix to properly regenerate data. * Compressing with a prefix is similar in outcome as performing a diff and compressing it, * but performs much faster, especially during decompression (compression speed is tunable with compression level). + * This method is compatible with LDM (long distance mode). * @result : 0, or an error code (which can be tested with ZSTD_isError()). * Special: Adding any prefix (including NULL) invalidates any previous prefix or dictionary * Note 1 : Prefix buffer is referenced. It **must** outlive compression. @@ -1387,7 +1396,7 @@ typedef enum { } ZSTD_paramSwitch_e; /*************************************** -* Frame size functions +* Frame header and size functions ***************************************/ /*! ZSTD_findDecompressedSize() : @@ -1434,6 +1443,30 @@ ZSTDLIB_STATIC_API unsigned long long ZSTD_decompressBound(const void* src, size * or an error code (if srcSize is too small) */ ZSTDLIB_STATIC_API size_t ZSTD_frameHeaderSize(const void* src, size_t srcSize); +typedef enum { ZSTD_frame, ZSTD_skippableFrame } ZSTD_frameType_e; +typedef struct { + unsigned long long frameContentSize; /* if == ZSTD_CONTENTSIZE_UNKNOWN, it means this field is not available. 0 means "empty" */ + unsigned long long windowSize; /* can be very large, up to <= frameContentSize */ + unsigned blockSizeMax; + ZSTD_frameType_e frameType; /* if == ZSTD_skippableFrame, frameContentSize is the size of skippable content */ + unsigned headerSize; + unsigned dictID; + unsigned checksumFlag; + unsigned _reserved1; + unsigned _reserved2; +} ZSTD_frameHeader; + +/*! ZSTD_getFrameHeader() : + * decode Frame Header, or requires larger `srcSize`. + * @return : 0, `zfhPtr` is correctly filled, + * >0, `srcSize` is too small, value is wanted `srcSize` amount, + * or an error code, which can be tested using ZSTD_isError() */ +ZSTDLIB_STATIC_API size_t ZSTD_getFrameHeader(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize); /**< doesn't consume input */ +/*! ZSTD_getFrameHeader_advanced() : + * same as ZSTD_getFrameHeader(), + * with added capability to select a format (like ZSTD_f_zstd1_magicless) */ +ZSTDLIB_STATIC_API size_t ZSTD_getFrameHeader_advanced(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize, ZSTD_format_e format); + /*! ZSTD_decompressionMargin() : * Zstd supports in-place decompression, where the input and output buffers overlap. * In this case, the output buffer must be at least (Margin + Output_Size) bytes large, @@ -1803,12 +1836,26 @@ ZSTDLIB_STATIC_API size_t ZSTD_checkCParams(ZSTD_compressionParameters params); ZSTDLIB_STATIC_API ZSTD_compressionParameters ZSTD_adjustCParams(ZSTD_compressionParameters cPar, unsigned long long srcSize, size_t dictSize); /*! ZSTD_CCtx_setCParams() : - * Set all parameters provided within @cparams into the working @cctx. + * Set all parameters provided within @p cparams into the working @p cctx. * Note : if modifying parameters during compression (MT mode only), * note that changes to the .windowLog parameter will be ignored. - * @return 0 on success, or an error code (can be checked with ZSTD_isError()) */ + * @return 0 on success, or an error code (can be checked with ZSTD_isError()). + * On failure, no parameters are updated. + */ ZSTDLIB_STATIC_API size_t ZSTD_CCtx_setCParams(ZSTD_CCtx* cctx, ZSTD_compressionParameters cparams); +/*! ZSTD_CCtx_setFParams() : + * Set all parameters provided within @p fparams into the working @p cctx. + * @return 0 on success, or an error code (can be checked with ZSTD_isError()). + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_setFParams(ZSTD_CCtx* cctx, ZSTD_frameParameters fparams); + +/*! ZSTD_CCtx_setParams() : + * Set all parameters provided within @p params into the working @p cctx. + * @return 0 on success, or an error code (can be checked with ZSTD_isError()). + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_setParams(ZSTD_CCtx* cctx, ZSTD_parameters params); + /*! ZSTD_compress_advanced() : * Note : this function is now DEPRECATED. * It can be replaced by ZSTD_compress2(), in combination with ZSTD_CCtx_setParameter() and other parameter setters. @@ -2134,7 +2181,7 @@ ZSTDLIB_STATIC_API size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const vo * This parameter can be used to set an upper bound on the blocksize * that overrides the default ZSTD_BLOCKSIZE_MAX. It cannot be used to set upper * bounds greater than ZSTD_BLOCKSIZE_MAX or bounds lower than 1KB (will make - * compressBound() innacurate). Only currently meant to be used for testing. + * compressBound() inaccurate). Only currently meant to be used for testing. * */ #define ZSTD_c_maxBlockSize ZSTD_c_experimentalParam18 @@ -2452,12 +2499,9 @@ size_t ZSTD_initCStream_usingDict(ZSTD_CStream* zcs, int compressionLevel); /*! ZSTD_initCStream_advanced() : - * This function is DEPRECATED, and is approximately equivalent to: + * This function is DEPRECATED, and is equivalent to: * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); - * // Pseudocode: Set each zstd parameter and leave the rest as-is. - * for ((param, value) : params) { - * ZSTD_CCtx_setParameter(zcs, param, value); - * } + * ZSTD_CCtx_setParams(zcs, params); * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); * ZSTD_CCtx_loadDictionary(zcs, dict, dictSize); * @@ -2486,12 +2530,9 @@ ZSTDLIB_STATIC_API size_t ZSTD_initCStream_usingCDict(ZSTD_CStream* zcs, const ZSTD_CDict* cdict); /*! ZSTD_initCStream_usingCDict_advanced() : - * This function is DEPRECATED, and is approximately equivalent to: + * This function is DEPRECATED, and is equivalent to: * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); - * // Pseudocode: Set each zstd frame parameter and leave the rest as-is. - * for ((fParam, value) : fParams) { - * ZSTD_CCtx_setParameter(zcs, fParam, value); - * } + * ZSTD_CCtx_setFParams(zcs, fParams); * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); * ZSTD_CCtx_refCDict(zcs, cdict); * @@ -2598,214 +2639,6 @@ ZSTD_DEPRECATED("use ZSTD_DCtx_reset, see zstd.h for detailed instructions") ZSTDLIB_STATIC_API size_t ZSTD_resetDStream(ZSTD_DStream* zds); -/********************************************************************* -* Buffer-less and synchronous inner streaming functions -* -* This is an advanced API, giving full control over buffer management, for users which need direct control over memory. -* But it's also a complex one, with several restrictions, documented below. -* Prefer normal streaming API for an easier experience. -********************************************************************* */ - -/** - Buffer-less streaming compression (synchronous mode) - - A ZSTD_CCtx object is required to track streaming operations. - Use ZSTD_createCCtx() / ZSTD_freeCCtx() to manage resource. - ZSTD_CCtx object can be re-used multiple times within successive compression operations. - - Start by initializing a context. - Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary compression. - - Then, consume your input using ZSTD_compressContinue(). - There are some important considerations to keep in mind when using this advanced function : - - ZSTD_compressContinue() has no internal buffer. It uses externally provided buffers only. - - Interface is synchronous : input is consumed entirely and produces 1+ compressed blocks. - - Caller must ensure there is enough space in `dst` to store compressed data under worst case scenario. - Worst case evaluation is provided by ZSTD_compressBound(). - ZSTD_compressContinue() doesn't guarantee recover after a failed compression. - - ZSTD_compressContinue() presumes prior input ***is still accessible and unmodified*** (up to maximum distance size, see WindowLog). - It remembers all previous contiguous blocks, plus one separated memory segment (which can itself consists of multiple contiguous blocks) - - ZSTD_compressContinue() detects that prior input has been overwritten when `src` buffer overlaps. - In which case, it will "discard" the relevant memory section from its history. - - Finish a frame with ZSTD_compressEnd(), which will write the last block(s) and optional checksum. - It's possible to use srcSize==0, in which case, it will write a final empty block to end the frame. - Without last block mark, frames are considered unfinished (hence corrupted) by compliant decoders. - - `ZSTD_CCtx` object can be re-used (ZSTD_compressBegin()) to compress again. -*/ - -/*===== Buffer-less streaming compression functions =====*/ -ZSTDLIB_STATIC_API size_t ZSTD_compressBegin(ZSTD_CCtx* cctx, int compressionLevel); -ZSTDLIB_STATIC_API size_t ZSTD_compressBegin_usingDict(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, int compressionLevel); -ZSTDLIB_STATIC_API size_t ZSTD_compressBegin_usingCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); /**< note: fails if cdict==NULL */ - -ZSTD_DEPRECATED("This function will likely be removed in a future release. It is misleading and has very limited utility.") -ZSTDLIB_STATIC_API -size_t ZSTD_copyCCtx(ZSTD_CCtx* cctx, const ZSTD_CCtx* preparedCCtx, unsigned long long pledgedSrcSize); /**< note: if pledgedSrcSize is not known, use ZSTD_CONTENTSIZE_UNKNOWN */ - -ZSTDLIB_STATIC_API size_t ZSTD_compressContinue(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); -ZSTDLIB_STATIC_API size_t ZSTD_compressEnd(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); - -/* The ZSTD_compressBegin_advanced() and ZSTD_compressBegin_usingCDict_advanced() are now DEPRECATED and will generate a compiler warning */ -ZSTD_DEPRECATED("use advanced API to access custom parameters") -ZSTDLIB_STATIC_API -size_t ZSTD_compressBegin_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_parameters params, unsigned long long pledgedSrcSize); /**< pledgedSrcSize : If srcSize is not known at init time, use ZSTD_CONTENTSIZE_UNKNOWN */ -ZSTD_DEPRECATED("use advanced API to access custom parameters") -ZSTDLIB_STATIC_API -size_t ZSTD_compressBegin_usingCDict_advanced(ZSTD_CCtx* const cctx, const ZSTD_CDict* const cdict, ZSTD_frameParameters const fParams, unsigned long long const pledgedSrcSize); /* compression parameters are already set within cdict. pledgedSrcSize must be correct. If srcSize is not known, use macro ZSTD_CONTENTSIZE_UNKNOWN */ -/** - Buffer-less streaming decompression (synchronous mode) - - A ZSTD_DCtx object is required to track streaming operations. - Use ZSTD_createDCtx() / ZSTD_freeDCtx() to manage it. - A ZSTD_DCtx object can be re-used multiple times. - - First typical operation is to retrieve frame parameters, using ZSTD_getFrameHeader(). - Frame header is extracted from the beginning of compressed frame, so providing only the frame's beginning is enough. - Data fragment must be large enough to ensure successful decoding. - `ZSTD_frameHeaderSize_max` bytes is guaranteed to always be large enough. - result : 0 : successful decoding, the `ZSTD_frameHeader` structure is correctly filled. - >0 : `srcSize` is too small, please provide at least result bytes on next attempt. - errorCode, which can be tested using ZSTD_isError(). - - It fills a ZSTD_frameHeader structure with important information to correctly decode the frame, - such as the dictionary ID, content size, or maximum back-reference distance (`windowSize`). - Note that these values could be wrong, either because of data corruption, or because a 3rd party deliberately spoofs false information. - As a consequence, check that values remain within valid application range. - For example, do not allocate memory blindly, check that `windowSize` is within expectation. - Each application can set its own limits, depending on local restrictions. - For extended interoperability, it is recommended to support `windowSize` of at least 8 MB. - - ZSTD_decompressContinue() needs previous data blocks during decompression, up to `windowSize` bytes. - ZSTD_decompressContinue() is very sensitive to contiguity, - if 2 blocks don't follow each other, make sure that either the compressor breaks contiguity at the same place, - or that previous contiguous segment is large enough to properly handle maximum back-reference distance. - There are multiple ways to guarantee this condition. - - The most memory efficient way is to use a round buffer of sufficient size. - Sufficient size is determined by invoking ZSTD_decodingBufferSize_min(), - which can return an error code if required value is too large for current system (in 32-bits mode). - In a round buffer methodology, ZSTD_decompressContinue() decompresses each block next to previous one, - up to the moment there is not enough room left in the buffer to guarantee decoding another full block, - which maximum size is provided in `ZSTD_frameHeader` structure, field `blockSizeMax`. - At which point, decoding can resume from the beginning of the buffer. - Note that already decoded data stored in the buffer should be flushed before being overwritten. - - There are alternatives possible, for example using two or more buffers of size `windowSize` each, though they consume more memory. - - Finally, if you control the compression process, you can also ignore all buffer size rules, - as long as the encoder and decoder progress in "lock-step", - aka use exactly the same buffer sizes, break contiguity at the same place, etc. - - Once buffers are setup, start decompression, with ZSTD_decompressBegin(). - If decompression requires a dictionary, use ZSTD_decompressBegin_usingDict() or ZSTD_decompressBegin_usingDDict(). - - Then use ZSTD_nextSrcSizeToDecompress() and ZSTD_decompressContinue() alternatively. - ZSTD_nextSrcSizeToDecompress() tells how many bytes to provide as 'srcSize' to ZSTD_decompressContinue(). - ZSTD_decompressContinue() requires this _exact_ amount of bytes, or it will fail. - - result of ZSTD_decompressContinue() is the number of bytes regenerated within 'dst' (necessarily <= dstCapacity). - It can be zero : it just means ZSTD_decompressContinue() has decoded some metadata item. - It can also be an error code, which can be tested with ZSTD_isError(). - - A frame is fully decoded when ZSTD_nextSrcSizeToDecompress() returns zero. - Context can then be reset to start a new decompression. - - Note : it's possible to know if next input to present is a header or a block, using ZSTD_nextInputType(). - This information is not required to properly decode a frame. - - == Special case : skippable frames == - - Skippable frames allow integration of user-defined data into a flow of concatenated frames. - Skippable frames will be ignored (skipped) by decompressor. - The format of skippable frames is as follows : - a) Skippable frame ID - 4 Bytes, Little endian format, any value from 0x184D2A50 to 0x184D2A5F - b) Frame Size - 4 Bytes, Little endian format, unsigned 32-bits - c) Frame Content - any content (User Data) of length equal to Frame Size - For skippable frames ZSTD_getFrameHeader() returns zfhPtr->frameType==ZSTD_skippableFrame. - For skippable frames ZSTD_decompressContinue() always returns 0 : it only skips the content. -*/ - -/*===== Buffer-less streaming decompression functions =====*/ -typedef enum { ZSTD_frame, ZSTD_skippableFrame } ZSTD_frameType_e; -typedef struct { - unsigned long long frameContentSize; /* if == ZSTD_CONTENTSIZE_UNKNOWN, it means this field is not available. 0 means "empty" */ - unsigned long long windowSize; /* can be very large, up to <= frameContentSize */ - unsigned blockSizeMax; - ZSTD_frameType_e frameType; /* if == ZSTD_skippableFrame, frameContentSize is the size of skippable content */ - unsigned headerSize; - unsigned dictID; - unsigned checksumFlag; - unsigned _reserved1; - unsigned _reserved2; -} ZSTD_frameHeader; - -/*! ZSTD_getFrameHeader() : - * decode Frame Header, or requires larger `srcSize`. - * @return : 0, `zfhPtr` is correctly filled, - * >0, `srcSize` is too small, value is wanted `srcSize` amount, - * or an error code, which can be tested using ZSTD_isError() */ -ZSTDLIB_STATIC_API size_t ZSTD_getFrameHeader(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize); /**< doesn't consume input */ -/*! ZSTD_getFrameHeader_advanced() : - * same as ZSTD_getFrameHeader(), - * with added capability to select a format (like ZSTD_f_zstd1_magicless) */ -ZSTDLIB_STATIC_API size_t ZSTD_getFrameHeader_advanced(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize, ZSTD_format_e format); -ZSTDLIB_STATIC_API size_t ZSTD_decodingBufferSize_min(unsigned long long windowSize, unsigned long long frameContentSize); /**< when frame content size is not known, pass in frameContentSize == ZSTD_CONTENTSIZE_UNKNOWN */ - -ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin(ZSTD_DCtx* dctx); -ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin_usingDict(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); -ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin_usingDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict); - -ZSTDLIB_STATIC_API size_t ZSTD_nextSrcSizeToDecompress(ZSTD_DCtx* dctx); -ZSTDLIB_STATIC_API size_t ZSTD_decompressContinue(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); - -/* misc */ -ZSTD_DEPRECATED("This function will likely be removed in the next minor release. It is misleading and has very limited utility.") -ZSTDLIB_STATIC_API void ZSTD_copyDCtx(ZSTD_DCtx* dctx, const ZSTD_DCtx* preparedDCtx); -typedef enum { ZSTDnit_frameHeader, ZSTDnit_blockHeader, ZSTDnit_block, ZSTDnit_lastBlock, ZSTDnit_checksum, ZSTDnit_skippableFrame } ZSTD_nextInputType_e; -ZSTDLIB_STATIC_API ZSTD_nextInputType_e ZSTD_nextInputType(ZSTD_DCtx* dctx); - - - - -/* ============================ */ -/** Block level API */ -/* ============================ */ - -/*! - Block functions produce and decode raw zstd blocks, without frame metadata. - Frame metadata cost is typically ~12 bytes, which can be non-negligible for very small blocks (< 100 bytes). - But users will have to take in charge needed metadata to regenerate data, such as compressed and content sizes. - - A few rules to respect : - - Compressing and decompressing require a context structure - + Use ZSTD_createCCtx() and ZSTD_createDCtx() - - It is necessary to init context before starting - + compression : any ZSTD_compressBegin*() variant, including with dictionary - + decompression : any ZSTD_decompressBegin*() variant, including with dictionary - - Block size is limited, it must be <= ZSTD_getBlockSize() <= ZSTD_BLOCKSIZE_MAX == 128 KB - + If input is larger than a block size, it's necessary to split input data into multiple blocks - + For inputs larger than a single block, consider using regular ZSTD_compress() instead. - Frame metadata is not that costly, and quickly becomes negligible as source size grows larger than a block. - - When a block is considered not compressible enough, ZSTD_compressBlock() result will be 0 (zero) ! - ===> In which case, nothing is produced into `dst` ! - + User __must__ test for such outcome and deal directly with uncompressed data - + A block cannot be declared incompressible if ZSTD_compressBlock() return value was != 0. - Doing so would mess up with statistics history, leading to potential data corruption. - + ZSTD_decompressBlock() _doesn't accept uncompressed data as input_ !! - + In case of multiple successive blocks, should some of them be uncompressed, - decoder must be informed of their existence in order to follow proper history. - Use ZSTD_insertBlock() for such a case. -*/ - -/*===== Raw zstd block functions =====*/ -ZSTDLIB_STATIC_API size_t ZSTD_getBlockSize (const ZSTD_CCtx* cctx); -ZSTDLIB_STATIC_API size_t ZSTD_compressBlock (ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); -ZSTDLIB_STATIC_API size_t ZSTD_decompressBlock(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); -ZSTDLIB_STATIC_API size_t ZSTD_insertBlock (ZSTD_DCtx* dctx, const void* blockStart, size_t blockSize); /**< insert uncompressed block into `dctx` history. Useful for multi-blocks decompression. */ - - /* ********************* BLOCK-LEVEL SEQUENCE PRODUCER API ********************* * * *** OVERVIEW *** @@ -2967,6 +2800,219 @@ ZSTD_registerSequenceProducer( ZSTD_sequenceProducer_F* sequenceProducer ); + +/********************************************************************* +* Buffer-less and synchronous inner streaming functions (DEPRECATED) +* +* This API is deprecated, and will be removed in a future version. +* It allows streaming (de)compression with user allocated buffers. +* However, it is hard to use, and not as well tested as the rest of +* our API. +* +* Please use the normal streaming API instead: ZSTD_compressStream2, +* and ZSTD_decompressStream. +* If there is functionality that you need, but it doesn't provide, +* please open an issue on our GitHub. +********************************************************************* */ + +/** + Buffer-less streaming compression (synchronous mode) + + A ZSTD_CCtx object is required to track streaming operations. + Use ZSTD_createCCtx() / ZSTD_freeCCtx() to manage resource. + ZSTD_CCtx object can be re-used multiple times within successive compression operations. + + Start by initializing a context. + Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary compression. + + Then, consume your input using ZSTD_compressContinue(). + There are some important considerations to keep in mind when using this advanced function : + - ZSTD_compressContinue() has no internal buffer. It uses externally provided buffers only. + - Interface is synchronous : input is consumed entirely and produces 1+ compressed blocks. + - Caller must ensure there is enough space in `dst` to store compressed data under worst case scenario. + Worst case evaluation is provided by ZSTD_compressBound(). + ZSTD_compressContinue() doesn't guarantee recover after a failed compression. + - ZSTD_compressContinue() presumes prior input ***is still accessible and unmodified*** (up to maximum distance size, see WindowLog). + It remembers all previous contiguous blocks, plus one separated memory segment (which can itself consists of multiple contiguous blocks) + - ZSTD_compressContinue() detects that prior input has been overwritten when `src` buffer overlaps. + In which case, it will "discard" the relevant memory section from its history. + + Finish a frame with ZSTD_compressEnd(), which will write the last block(s) and optional checksum. + It's possible to use srcSize==0, in which case, it will write a final empty block to end the frame. + Without last block mark, frames are considered unfinished (hence corrupted) by compliant decoders. + + `ZSTD_CCtx` object can be re-used (ZSTD_compressBegin()) to compress again. +*/ + +/*===== Buffer-less streaming compression functions =====*/ +ZSTD_DEPRECATED("The buffer-less API is deprecated in favor of the normal streaming API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressBegin(ZSTD_CCtx* cctx, int compressionLevel); +ZSTD_DEPRECATED("The buffer-less API is deprecated in favor of the normal streaming API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressBegin_usingDict(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, int compressionLevel); +ZSTD_DEPRECATED("The buffer-less API is deprecated in favor of the normal streaming API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressBegin_usingCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); /**< note: fails if cdict==NULL */ + +ZSTD_DEPRECATED("This function will likely be removed in a future release. It is misleading and has very limited utility.") +ZSTDLIB_STATIC_API +size_t ZSTD_copyCCtx(ZSTD_CCtx* cctx, const ZSTD_CCtx* preparedCCtx, unsigned long long pledgedSrcSize); /**< note: if pledgedSrcSize is not known, use ZSTD_CONTENTSIZE_UNKNOWN */ + +ZSTD_DEPRECATED("The buffer-less API is deprecated in favor of the normal streaming API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressContinue(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); +ZSTD_DEPRECATED("The buffer-less API is deprecated in favor of the normal streaming API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressEnd(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); + +/* The ZSTD_compressBegin_advanced() and ZSTD_compressBegin_usingCDict_advanced() are now DEPRECATED and will generate a compiler warning */ +ZSTD_DEPRECATED("use advanced API to access custom parameters") +ZSTDLIB_STATIC_API +size_t ZSTD_compressBegin_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_parameters params, unsigned long long pledgedSrcSize); /**< pledgedSrcSize : If srcSize is not known at init time, use ZSTD_CONTENTSIZE_UNKNOWN */ +ZSTD_DEPRECATED("use advanced API to access custom parameters") +ZSTDLIB_STATIC_API +size_t ZSTD_compressBegin_usingCDict_advanced(ZSTD_CCtx* const cctx, const ZSTD_CDict* const cdict, ZSTD_frameParameters const fParams, unsigned long long const pledgedSrcSize); /* compression parameters are already set within cdict. pledgedSrcSize must be correct. If srcSize is not known, use macro ZSTD_CONTENTSIZE_UNKNOWN */ +/** + Buffer-less streaming decompression (synchronous mode) + + A ZSTD_DCtx object is required to track streaming operations. + Use ZSTD_createDCtx() / ZSTD_freeDCtx() to manage it. + A ZSTD_DCtx object can be re-used multiple times. + + First typical operation is to retrieve frame parameters, using ZSTD_getFrameHeader(). + Frame header is extracted from the beginning of compressed frame, so providing only the frame's beginning is enough. + Data fragment must be large enough to ensure successful decoding. + `ZSTD_frameHeaderSize_max` bytes is guaranteed to always be large enough. + result : 0 : successful decoding, the `ZSTD_frameHeader` structure is correctly filled. + >0 : `srcSize` is too small, please provide at least result bytes on next attempt. + errorCode, which can be tested using ZSTD_isError(). + + It fills a ZSTD_frameHeader structure with important information to correctly decode the frame, + such as the dictionary ID, content size, or maximum back-reference distance (`windowSize`). + Note that these values could be wrong, either because of data corruption, or because a 3rd party deliberately spoofs false information. + As a consequence, check that values remain within valid application range. + For example, do not allocate memory blindly, check that `windowSize` is within expectation. + Each application can set its own limits, depending on local restrictions. + For extended interoperability, it is recommended to support `windowSize` of at least 8 MB. + + ZSTD_decompressContinue() needs previous data blocks during decompression, up to `windowSize` bytes. + ZSTD_decompressContinue() is very sensitive to contiguity, + if 2 blocks don't follow each other, make sure that either the compressor breaks contiguity at the same place, + or that previous contiguous segment is large enough to properly handle maximum back-reference distance. + There are multiple ways to guarantee this condition. + + The most memory efficient way is to use a round buffer of sufficient size. + Sufficient size is determined by invoking ZSTD_decodingBufferSize_min(), + which can return an error code if required value is too large for current system (in 32-bits mode). + In a round buffer methodology, ZSTD_decompressContinue() decompresses each block next to previous one, + up to the moment there is not enough room left in the buffer to guarantee decoding another full block, + which maximum size is provided in `ZSTD_frameHeader` structure, field `blockSizeMax`. + At which point, decoding can resume from the beginning of the buffer. + Note that already decoded data stored in the buffer should be flushed before being overwritten. + + There are alternatives possible, for example using two or more buffers of size `windowSize` each, though they consume more memory. + + Finally, if you control the compression process, you can also ignore all buffer size rules, + as long as the encoder and decoder progress in "lock-step", + aka use exactly the same buffer sizes, break contiguity at the same place, etc. + + Once buffers are setup, start decompression, with ZSTD_decompressBegin(). + If decompression requires a dictionary, use ZSTD_decompressBegin_usingDict() or ZSTD_decompressBegin_usingDDict(). + + Then use ZSTD_nextSrcSizeToDecompress() and ZSTD_decompressContinue() alternatively. + ZSTD_nextSrcSizeToDecompress() tells how many bytes to provide as 'srcSize' to ZSTD_decompressContinue(). + ZSTD_decompressContinue() requires this _exact_ amount of bytes, or it will fail. + + result of ZSTD_decompressContinue() is the number of bytes regenerated within 'dst' (necessarily <= dstCapacity). + It can be zero : it just means ZSTD_decompressContinue() has decoded some metadata item. + It can also be an error code, which can be tested with ZSTD_isError(). + + A frame is fully decoded when ZSTD_nextSrcSizeToDecompress() returns zero. + Context can then be reset to start a new decompression. + + Note : it's possible to know if next input to present is a header or a block, using ZSTD_nextInputType(). + This information is not required to properly decode a frame. + + == Special case : skippable frames == + + Skippable frames allow integration of user-defined data into a flow of concatenated frames. + Skippable frames will be ignored (skipped) by decompressor. + The format of skippable frames is as follows : + a) Skippable frame ID - 4 Bytes, Little endian format, any value from 0x184D2A50 to 0x184D2A5F + b) Frame Size - 4 Bytes, Little endian format, unsigned 32-bits + c) Frame Content - any content (User Data) of length equal to Frame Size + For skippable frames ZSTD_getFrameHeader() returns zfhPtr->frameType==ZSTD_skippableFrame. + For skippable frames ZSTD_decompressContinue() always returns 0 : it only skips the content. +*/ + +/*===== Buffer-less streaming decompression functions =====*/ + +ZSTDLIB_STATIC_API size_t ZSTD_decodingBufferSize_min(unsigned long long windowSize, unsigned long long frameContentSize); /**< when frame content size is not known, pass in frameContentSize == ZSTD_CONTENTSIZE_UNKNOWN */ + +ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin(ZSTD_DCtx* dctx); +ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin_usingDict(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); +ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin_usingDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict); + +ZSTDLIB_STATIC_API size_t ZSTD_nextSrcSizeToDecompress(ZSTD_DCtx* dctx); +ZSTDLIB_STATIC_API size_t ZSTD_decompressContinue(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); + +/* misc */ +ZSTD_DEPRECATED("This function will likely be removed in the next minor release. It is misleading and has very limited utility.") +ZSTDLIB_STATIC_API void ZSTD_copyDCtx(ZSTD_DCtx* dctx, const ZSTD_DCtx* preparedDCtx); +typedef enum { ZSTDnit_frameHeader, ZSTDnit_blockHeader, ZSTDnit_block, ZSTDnit_lastBlock, ZSTDnit_checksum, ZSTDnit_skippableFrame } ZSTD_nextInputType_e; +ZSTDLIB_STATIC_API ZSTD_nextInputType_e ZSTD_nextInputType(ZSTD_DCtx* dctx); + + + + +/* ========================================= */ +/** Block level API (DEPRECATED) */ +/* ========================================= */ + +/*! + + This API is deprecated in favor of the regular compression API. + You can get the frame header down to 2 bytes by setting: + - ZSTD_c_format = ZSTD_f_zstd1_magicless + - ZSTD_c_contentSizeFlag = 0 + - ZSTD_c_checksumFlag = 0 + - ZSTD_c_dictIDFlag = 0 + + This API is not as well tested as our normal API, so we recommend not using it. + We will be removing it in a future version. If the normal API doesn't provide + the functionality you need, please open a GitHub issue. + + Block functions produce and decode raw zstd blocks, without frame metadata. + Frame metadata cost is typically ~12 bytes, which can be non-negligible for very small blocks (< 100 bytes). + But users will have to take in charge needed metadata to regenerate data, such as compressed and content sizes. + + A few rules to respect : + - Compressing and decompressing require a context structure + + Use ZSTD_createCCtx() and ZSTD_createDCtx() + - It is necessary to init context before starting + + compression : any ZSTD_compressBegin*() variant, including with dictionary + + decompression : any ZSTD_decompressBegin*() variant, including with dictionary + - Block size is limited, it must be <= ZSTD_getBlockSize() <= ZSTD_BLOCKSIZE_MAX == 128 KB + + If input is larger than a block size, it's necessary to split input data into multiple blocks + + For inputs larger than a single block, consider using regular ZSTD_compress() instead. + Frame metadata is not that costly, and quickly becomes negligible as source size grows larger than a block. + - When a block is considered not compressible enough, ZSTD_compressBlock() result will be 0 (zero) ! + ===> In which case, nothing is produced into `dst` ! + + User __must__ test for such outcome and deal directly with uncompressed data + + A block cannot be declared incompressible if ZSTD_compressBlock() return value was != 0. + Doing so would mess up with statistics history, leading to potential data corruption. + + ZSTD_decompressBlock() _doesn't accept uncompressed data as input_ !! + + In case of multiple successive blocks, should some of them be uncompressed, + decoder must be informed of their existence in order to follow proper history. + Use ZSTD_insertBlock() for such a case. +*/ + +/*===== Raw zstd block functions =====*/ +ZSTD_DEPRECATED("The block API is deprecated in favor of the normal compression API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_getBlockSize (const ZSTD_CCtx* cctx); +ZSTD_DEPRECATED("The block API is deprecated in favor of the normal compression API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressBlock (ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); +ZSTD_DEPRECATED("The block API is deprecated in favor of the normal compression API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_decompressBlock(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); +ZSTD_DEPRECATED("The block API is deprecated in favor of the normal compression API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_insertBlock (ZSTD_DCtx* dctx, const void* blockStart, size_t blockSize); /**< insert uncompressed block into `dctx` history. Useful for multi-blocks decompression. */ + #endif /* ZSTD_H_ZSTD_STATIC_LINKING_ONLY */ #if defined (__cplusplus) diff --git a/vendor/modules.txt b/vendor/modules.txt index 9adaff4b8..681e0c3ad 100644 --- a/vendor/modules.txt +++ b/vendor/modules.txt @@ -461,7 +461,7 @@ github.com/valyala/fastrand # github.com/valyala/fasttemplate v1.2.2 ## explicit; go 1.12 github.com/valyala/fasttemplate -# github.com/valyala/gozstd v1.18.0 +# github.com/valyala/gozstd v1.19.0 ## explicit; go 1.12 github.com/valyala/gozstd # github.com/valyala/histogram v1.2.0