vendor: make vendor-update

go.mod

@@ -10,10 +10,11 @@ require (
 	github.com/VictoriaMetrics/fasthttp v1.0.7
 	github.com/VictoriaMetrics/metrics v1.12.3
 	github.com/VictoriaMetrics/metricsql v0.6.0
-	github.com/aws/aws-sdk-go v1.34.25
+	github.com/aws/aws-sdk-go v1.34.28
 	github.com/cespare/xxhash/v2 v2.1.1
-	github.com/golang/snappy v0.0.1
+	github.com/golang/snappy v0.0.2
 	github.com/klauspost/compress v1.11.0
+	github.com/stretchr/testify v1.5.1 // indirect
 	github.com/valyala/fastjson v1.6.1
 	github.com/valyala/fastrand v1.0.0
 	github.com/valyala/fasttemplate v1.2.1
@@ -21,10 +22,10 @@ require (
 	github.com/valyala/histogram v1.1.2
 	github.com/valyala/quicktemplate v1.6.3
 	golang.org/x/oauth2 v0.0.0-20200902213428-5d25da1a8d43
-	golang.org/x/sys v0.0.0-20200916084744-dbad9cb7cb7a
+	golang.org/x/sys v0.0.0-20200922070232-aee5d888a860
-	golang.org/x/tools v0.0.0-20200916195026-c9a70fc28ce3 // indirect
+	golang.org/x/tools v0.0.0-20200921210052-fa0125251cc4 // indirect
 	google.golang.org/api v0.32.0
-	google.golang.org/genproto v0.0.0-20200916143405-f6a2fa72f0c4 // indirect
+	google.golang.org/genproto v0.0.0-20200921165018-b9da36f5f452 // indirect
 	google.golang.org/grpc v1.32.0 // indirect
 	gopkg.in/yaml.v2 v2.3.0
 )

go.sum

@@ -65,8 +65,8 @@ github.com/VictoriaMetrics/metricsql v0.6.0/go.mod h1:ylO7YITho/Iw6P71oEaGyHbO94
 github.com/allegro/bigcache v1.2.1-0.20190218064605-e24eb225f156 h1:eMwmnE/GDgah4HI848JfFxHt+iPb26b4zyfspmqY0/8=
 github.com/allegro/bigcache v1.2.1-0.20190218064605-e24eb225f156/go.mod h1:Cb/ax3seSYIx7SuZdm2G2xzfwmv3TPSk2ucNfQESPXM=
 github.com/andybalholm/brotli v1.0.0/go.mod h1:loMXtMfwqflxFJPmdbJO0a3KNoPuLBgiu3qAvBg8x/Y=
-github.com/aws/aws-sdk-go v1.34.25 h1:yHNez503p+NuQ5QdMKjwEIkwTa2u+TeUAPAqCVdFu4I=
+github.com/aws/aws-sdk-go v1.34.28 h1:sscPpn/Ns3i0F4HPEWAVcwdIRaZZCuL7llJ2/60yPIk=
-github.com/aws/aws-sdk-go v1.34.25/go.mod h1:5zCpMtNQVjRREroY7sYe8lOMRSxkhG6MZveU8YkpAk0=
+github.com/aws/aws-sdk-go v1.34.28/go.mod h1:H7NKnBqNVzoTJpGfLrQkkD+ytBA93eiDYi/+8rV9s48=
 github.com/census-instrumentation/opencensus-proto v0.2.1/go.mod h1:f6KPmirojxKA12rnyqOA5BBL4O983OfeGPqjHWSTneU=
 github.com/cespare/xxhash/v2 v2.1.1 h1:6MnRN8NT7+YBpUIWxHtefFZOKTAPgGjpQSxqLNn0+qY=
 github.com/cespare/xxhash/v2 v2.1.1/go.mod h1:VGX0DQ3Q6kWi7AoAeZDth3/j3BFtOZR5XLFGgcrjCOs=
@@ -114,6 +114,8 @@ github.com/golang/protobuf v1.4.2 h1:+Z5KGCizgyZCbGh1KZqA0fcLLkwbsjIzS4aV2v7wJX0
 github.com/golang/protobuf v1.4.2/go.mod h1:oDoupMAO8OvCJWAcko0GGGIgR6R6ocIYbsSw735rRwI=
 github.com/golang/snappy v0.0.1 h1:Qgr9rKW7uDUkrbSmQeiDsGa8SjGyCOGtuasMWwvp2P4=
 github.com/golang/snappy v0.0.1/go.mod h1:/XxbfmMg8lxefKM7IXC3fBNl/7bRcc72aCRzEWrmP2Q=
+github.com/golang/snappy v0.0.2 h1:aeE13tS0IiQgFjYdoL8qN3K1N2bXXtI6Vi51/y7BpMw=
+github.com/golang/snappy v0.0.2/go.mod h1:/XxbfmMg8lxefKM7IXC3fBNl/7bRcc72aCRzEWrmP2Q=
 github.com/google/btree v0.0.0-20180813153112-4030bb1f1f0c/go.mod h1:lNA+9X1NB3Zf8V7Ke586lFgjr2dZNuvo3lPJSGZ5JPQ=
 github.com/google/btree v1.0.0/go.mod h1:lNA+9X1NB3Zf8V7Ke586lFgjr2dZNuvo3lPJSGZ5JPQ=
 github.com/google/go-cmp v0.2.0/go.mod h1:oXzfMopK8JAjlY9xF4vHSVASa0yLyX7SntLO5aqRK0M=
@@ -145,8 +147,10 @@ github.com/googleapis/gax-go/v2 v2.0.5/go.mod h1:DWXyrwAJ9X0FpwwEdw+IPEYBICEFu5m
 github.com/hashicorp/golang-lru v0.5.0/go.mod h1:/m3WP610KZHVQ1SGc6re/UDhFvYD7pJ4Ao+sR/qLZy8=
 github.com/hashicorp/golang-lru v0.5.1/go.mod h1:/m3WP610KZHVQ1SGc6re/UDhFvYD7pJ4Ao+sR/qLZy8=
 github.com/ianlancetaylor/demangle v0.0.0-20181102032728-5e5cf60278f6/go.mod h1:aSSvb/t6k1mPoxDqO4vJh6VOCGPwU4O0C2/Eqndh1Sc=
-github.com/jmespath/go-jmespath v0.3.0 h1:OS12ieG61fsCg5+qLJ+SsW9NicxNkg3b25OyT2yCeUc=
+github.com/jmespath/go-jmespath v0.4.0 h1:BEgLn5cpjn8UN1mAw4NjwDrS35OdebyEtFe+9YPoQUg=
-github.com/jmespath/go-jmespath v0.3.0/go.mod h1:9QtRXoHjLGCJ5IBSaohpXITPlowMeeYCZ7fLUTSywik=
+github.com/jmespath/go-jmespath v0.4.0/go.mod h1:T8mJZnbsbmF+m6zOOFylbeCJqk5+pHWvzYPziyZiYoo=
+github.com/jmespath/go-jmespath/internal/testify v1.5.1 h1:shLQSRRSCCPj3f2gpwzGwWFoC7ycTf1rcQZHOlsJ6N8=
+github.com/jmespath/go-jmespath/internal/testify v1.5.1/go.mod h1:L3OGu8Wl2/fWfCI6z80xFu9LTZmf1ZRjMHUOPmWr69U=
 github.com/jstemmer/go-junit-report v0.0.0-20190106144839-af01ea7f8024/go.mod h1:6v2b51hI/fHJwM22ozAgKL4VKDeJcHhJFhtBdhmNjmU=
 github.com/jstemmer/go-junit-report v0.9.1 h1:6QPYqodiu3GuPL+7mfx+NwDdp2eTkp9IfEUpgAwUN0o=
 github.com/jstemmer/go-junit-report v0.9.1/go.mod h1:Brl9GWCQeLvo8nXZwPNNblvFj/XSXhF0NWZEnDohbsk=
@@ -309,8 +313,8 @@ golang.org/x/sys v0.0.0-20200602225109-6fdc65e7d980/go.mod h1:h1NjWce9XRLGQEsW7w
 golang.org/x/sys v0.0.0-20200803210538-64077c9b5642/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
 golang.org/x/sys v0.0.0-20200828194041-157a740278f4/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
 golang.org/x/sys v0.0.0-20200905004654-be1d3432aa8f/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20200916084744-dbad9cb7cb7a h1:chkwkn8HYWVtTE5DCQNKYlkyptadXYY0+PuyaVdyMo4=
+golang.org/x/sys v0.0.0-20200922070232-aee5d888a860 h1:YEu4SMq7D0cmT7CBbXfcH0NZeuChAXwsHe/9XueUO6o=
-golang.org/x/sys v0.0.0-20200916084744-dbad9cb7cb7a/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
+golang.org/x/sys v0.0.0-20200922070232-aee5d888a860/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
 golang.org/x/text v0.0.0-20170915032832-14c0d48ead0c/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
 golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
 golang.org/x/text v0.3.1-0.20180807135948-17ff2d5776d2/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
@@ -365,8 +369,8 @@ golang.org/x/tools v0.0.0-20200827163409-021d7c6f1ec3/go.mod h1:njjCfa9FT2d7l9Bc
 golang.org/x/tools v0.0.0-20200828161849-5deb26317202/go.mod h1:njjCfa9FT2d7l9Bc6FUM5FLjQPp3cFF28FI3qnDFljA=
 golang.org/x/tools v0.0.0-20200904185747-39188db58858/go.mod h1:Cj7w3i3Rnn0Xh82ur9kSqwfTHTeVxaDqrfMjpcNT6bE=
 golang.org/x/tools v0.0.0-20200915173823-2db8f0ff891c/go.mod h1:z6u4i615ZeAfBE4XtMziQW1fSVJXACjjbWkB/mvPzlU=
-golang.org/x/tools v0.0.0-20200916195026-c9a70fc28ce3 h1:DywqrEscRX7O2phNjkT0L6lhHKGBoMLCNX+XcAe7t6s=
+golang.org/x/tools v0.0.0-20200921210052-fa0125251cc4 h1:v8Jgq9X6Es9K9otVr9jxENEJigepKMZgA9OmrIZDtFA=
-golang.org/x/tools v0.0.0-20200916195026-c9a70fc28ce3/go.mod h1:z6u4i615ZeAfBE4XtMziQW1fSVJXACjjbWkB/mvPzlU=
+golang.org/x/tools v0.0.0-20200921210052-fa0125251cc4/go.mod h1:z6u4i615ZeAfBE4XtMziQW1fSVJXACjjbWkB/mvPzlU=
 golang.org/x/xerrors v0.0.0-20190717185122-a985d3407aa7/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
 golang.org/x/xerrors v0.0.0-20191011141410-1b5146add898/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
 golang.org/x/xerrors v0.0.0-20191204190536-9bdfabe68543/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
@@ -435,8 +439,8 @@ google.golang.org/genproto v0.0.0-20200831141814-d751682dd103/go.mod h1:FWY/as6D
 google.golang.org/genproto v0.0.0-20200904004341-0bd0a958aa1d h1:92D1fum1bJLKSdr11OJ+54YeCMCGYIygTA7R/YZxH5M=
 google.golang.org/genproto v0.0.0-20200904004341-0bd0a958aa1d/go.mod h1:FWY/as6DDZQgahTzZj3fqbO1CbirC29ZNUFHwi0/+no=
 google.golang.org/genproto v0.0.0-20200914193844-75d14daec038/go.mod h1:FWY/as6DDZQgahTzZj3fqbO1CbirC29ZNUFHwi0/+no=
-google.golang.org/genproto v0.0.0-20200916143405-f6a2fa72f0c4 h1:0FQbRyP6f/LVRsofCaQD4BMMd5kRAXMo/WvispzB940=
+google.golang.org/genproto v0.0.0-20200921165018-b9da36f5f452 h1:2S8dcPkOK9QyAAKa46Cgl//VOCS6ZOsY+iwD3bb9Phg=
-google.golang.org/genproto v0.0.0-20200916143405-f6a2fa72f0c4/go.mod h1:FWY/as6DDZQgahTzZj3fqbO1CbirC29ZNUFHwi0/+no=
+google.golang.org/genproto v0.0.0-20200921165018-b9da36f5f452/go.mod h1:FWY/as6DDZQgahTzZj3fqbO1CbirC29ZNUFHwi0/+no=
 google.golang.org/grpc v1.19.0/go.mod h1:mqu4LbDTu4XGKhr4mRzUsmM4RtVoemTSY81AxZiDr8c=
 google.golang.org/grpc v1.20.1/go.mod h1:10oTOabMzJvdu6/UiuZezV6QK5dSlG84ov/aaiqXj38=
 google.golang.org/grpc v1.21.1/go.mod h1:oYelfM1adQP15Ek0mdvEgi9Df8B9CZIaU1084ijfRaM=
@@ -470,6 +474,7 @@ gopkg.in/check.v1 v1.0.0-20180628173108-788fd7840127 h1:qIbj1fsPNlZgppZ+VLlY7N33
 gopkg.in/check.v1 v1.0.0-20180628173108-788fd7840127/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
 gopkg.in/errgo.v2 v2.1.0/go.mod h1:hNsd1EY+bozCKY1Ytp96fpM3vjJbqLJn88ws8XvfDNI=
 gopkg.in/yaml.v2 v2.2.2/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
+gopkg.in/yaml.v2 v2.2.8/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
 gopkg.in/yaml.v2 v2.3.0 h1:clyUAQHOM3G0M3f5vQj7LuJrETvjVot3Z5el9nffUtU=
 gopkg.in/yaml.v2 v2.3.0/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
 honnef.co/go/tools v0.0.0-20190102054323-c2f93a96b099/go.mod h1:rf3lG4BRIbNafJWhAfAdb/ePZxsR/4RtNHQocxwk9r4=

vendor/github.com/aws/aws-sdk-go/aws/endpoints/defaults.go

@@ -349,6 +349,7 @@ var awsPartition = partition{
 				Protocols: []string{"https"},
 			},
 			Endpoints: endpoints{
+				"af-south-1":     endpoint{},
 				"ap-east-1":      endpoint{},
 				"ap-northeast-1": endpoint{},
 				"ap-northeast-2": endpoint{},
@@ -358,6 +359,7 @@ var awsPartition = partition{
 				"ca-central-1":   endpoint{},
 				"eu-central-1":   endpoint{},
 				"eu-north-1":     endpoint{},
+				"eu-south-1":     endpoint{},
 				"eu-west-1":      endpoint{},
 				"eu-west-2":      endpoint{},
 				"eu-west-3":      endpoint{},
@@ -1250,6 +1252,7 @@ var awsPartition = partition{
 				"ca-central-1":   endpoint{},
 				"eu-central-1":   endpoint{},
 				"eu-north-1":     endpoint{},
+				"eu-south-1":     endpoint{},
 				"eu-west-1":      endpoint{},
 				"eu-west-2":      endpoint{},
 				"eu-west-3":      endpoint{},
@@ -2196,6 +2199,7 @@ var awsPartition = partition{
 				"sa-east-1":  endpoint{},
 				"us-east-1":  endpoint{},
 				"us-east-2":  endpoint{},
+				"us-west-1":  endpoint{},
 				"us-west-2":  endpoint{},
 			},
 		},
@@ -4703,6 +4707,12 @@ var awsPartition = partition{
 				"eu-central-1":   endpoint{},
 				"eu-west-1":      endpoint{},
 				"eu-west-2":      endpoint{},
+				"rekognition-fips.ca-central-1": endpoint{
+					Hostname: "rekognition-fips.ca-central-1.amazonaws.com",
+					CredentialScope: credentialScope{
+						Region: "ca-central-1",
+					},
+				},
 				"rekognition-fips.us-east-1": endpoint{
 					Hostname: "rekognition-fips.us-east-1.amazonaws.com",
 					CredentialScope: credentialScope{
@@ -5556,6 +5566,12 @@ var awsPartition = partition{
 						Region: "ap-northeast-2",
 					},
 				},
+				"fips-ap-northeast-3": endpoint{
+					Hostname: "snowball-fips.ap-northeast-3.amazonaws.com",
+					CredentialScope: credentialScope{
+						Region: "ap-northeast-3",
+					},
+				},
 				"fips-ap-south-1": endpoint{
 					Hostname: "snowball-fips.ap-south-1.amazonaws.com",
 					CredentialScope: credentialScope{
@@ -8170,7 +8186,12 @@ var awsusgovPartition = partition{
 		"health": service{
 
 			Endpoints: endpoints{
-				"us-gov-west-1": endpoint{},
+				"fips-us-gov-west-1": endpoint{
+					Hostname: "health-fips.us-gov-west-1.amazonaws.com",
+					CredentialScope: credentialScope{
+						Region: "us-gov-west-1",
+					},
+				},
 			},
 		},
 		"iam": service{

vendor/github.com/aws/aws-sdk-go/aws/version.go

@@ -5,4 +5,4 @@ package aws
 const SDKName = "aws-sdk-go"
 
 // SDKVersion is the version of this SDK
-const SDKVersion = "1.34.25"
+const SDKVersion = "1.34.28"

vendor/github.com/golang/snappy/AUTHORS

@@ -8,8 +8,10 @@
 
 # Please keep the list sorted.
 
+Amazon.com, Inc
 Damian Gryski <dgryski@gmail.com>
 Google Inc.
 Jan Mercl <0xjnml@gmail.com>
+Klaus Post <klauspost@gmail.com>
 Rodolfo Carvalho <rhcarvalho@gmail.com>
 Sebastien Binet <seb.binet@gmail.com>

vendor/github.com/golang/snappy/CONTRIBUTORS

@@ -28,7 +28,9 @@
 
 Damian Gryski <dgryski@gmail.com>
 Jan Mercl <0xjnml@gmail.com>
+Jonathan Swinney <jswinney@amazon.com>
 Kai Backman <kaib@golang.org>
+Klaus Post <klauspost@gmail.com>
 Marc-Antoine Ruel <maruel@chromium.org>
 Nigel Tao <nigeltao@golang.org>
 Rob Pike <r@golang.org>

vendor/github.com/golang/snappy/decode.go

@@ -52,6 +52,8 @@ const (
 // Otherwise, a newly allocated slice will be returned.
 //
 // The dst and src must not overlap. It is valid to pass a nil dst.
+//
+// Decode handles the Snappy block format, not the Snappy stream format.
 func Decode(dst, src []byte) ([]byte, error) {
 	dLen, s, err := decodedLen(src)
 	if err != nil {
@@ -83,6 +85,8 @@ func NewReader(r io.Reader) *Reader {
 }
 
 // Reader is an io.Reader that can read Snappy-compressed bytes.
+//
+// Reader handles the Snappy stream format, not the Snappy block format.
 type Reader struct {
 	r       io.Reader
 	err     error

vendor/github.com/golang/snappy/decode_arm64.s

@@ -0,0 +1,503 @@
+// Copyright 2020 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build !appengine
+// +build gc
+// +build !noasm
+
+#include "textflag.h"
+
+// The asm code generally follows the pure Go code in decode_other.go, except
+// where marked with a "!!!".
+
+// func decode(dst, src []byte) int
+//
+// All local variables fit into registers. The non-zero stack size is only to
+// spill registers and push args when issuing a CALL. The register allocation:
+//	- R2	scratch
+//	- R3	scratch
+//	- R4	length or x
+//	- R5	offset
+//	- R6	&src[s]
+//	- R7	&dst[d]
+//	+ R8	dst_base
+//	+ R9	dst_len
+//	+ R10	dst_base + dst_len
+//	+ R11	src_base
+//	+ R12	src_len
+//	+ R13	src_base + src_len
+//	- R14	used by doCopy
+//	- R15	used by doCopy
+//
+// The registers R8-R13 (marked with a "+") are set at the start of the
+// function, and after a CALL returns, and are not otherwise modified.
+//
+// The d variable is implicitly R7 - R8,  and len(dst)-d is R10 - R7.
+// The s variable is implicitly R6 - R11, and len(src)-s is R13 - R6.
+TEXT ·decode(SB), NOSPLIT, $56-56
+	// Initialize R6, R7 and R8-R13.
+	MOVD dst_base+0(FP), R8
+	MOVD dst_len+8(FP), R9
+	MOVD R8, R7
+	MOVD R8, R10
+	ADD  R9, R10, R10
+	MOVD src_base+24(FP), R11
+	MOVD src_len+32(FP), R12
+	MOVD R11, R6
+	MOVD R11, R13
+	ADD  R12, R13, R13
+
+loop:
+	// for s < len(src)
+	CMP R13, R6
+	BEQ end
+
+	// R4 = uint32(src[s])
+	//
+	// switch src[s] & 0x03
+	MOVBU (R6), R4
+	MOVW  R4, R3
+	ANDW  $3, R3
+	MOVW  $1, R1
+	CMPW  R1, R3
+	BGE   tagCopy
+
+	// ----------------------------------------
+	// The code below handles literal tags.
+
+	// case tagLiteral:
+	// x := uint32(src[s] >> 2)
+	// switch
+	MOVW $60, R1
+	ADD  R4>>2, ZR, R4
+	CMPW R4, R1
+	BLS  tagLit60Plus
+
+	// case x < 60:
+	// s++
+	ADD $1, R6, R6
+
+doLit:
+	// This is the end of the inner "switch", when we have a literal tag.
+	//
+	// We assume that R4 == x and x fits in a uint32, where x is the variable
+	// used in the pure Go decode_other.go code.
+
+	// length = int(x) + 1
+	//
+	// Unlike the pure Go code, we don't need to check if length <= 0 because
+	// R4 can hold 64 bits, so the increment cannot overflow.
+	ADD $1, R4, R4
+
+	// Prepare to check if copying length bytes will run past the end of dst or
+	// src.
+	//
+	// R2 = len(dst) - d
+	// R3 = len(src) - s
+	MOVD R10, R2
+	SUB  R7, R2, R2
+	MOVD R13, R3
+	SUB  R6, R3, R3
+
+	// !!! Try a faster technique for short (16 or fewer bytes) copies.
+	//
+	// if length > 16 || len(dst)-d < 16 || len(src)-s < 16 {
+	//   goto callMemmove // Fall back on calling runtime·memmove.
+	// }
+	//
+	// The C++ snappy code calls this TryFastAppend. It also checks len(src)-s
+	// against 21 instead of 16, because it cannot assume that all of its input
+	// is contiguous in memory and so it needs to leave enough source bytes to
+	// read the next tag without refilling buffers, but Go's Decode assumes
+	// contiguousness (the src argument is a []byte).
+	MOVD $16, R1
+	CMP  R1, R4
+	BGT  callMemmove
+	CMP  R1, R2
+	BLT  callMemmove
+	CMP  R1, R3
+	BLT  callMemmove
+
+	// !!! Implement the copy from src to dst as a 16-byte load and store.
+	// (Decode's documentation says that dst and src must not overlap.)
+	//
+	// This always copies 16 bytes, instead of only length bytes, but that's
+	// OK. If the input is a valid Snappy encoding then subsequent iterations
+	// will fix up the overrun. Otherwise, Decode returns a nil []byte (and a
+	// non-nil error), so the overrun will be ignored.
+	//
+	// Note that on arm64, it is legal and cheap to issue unaligned 8-byte or
+	// 16-byte loads and stores. This technique probably wouldn't be as
+	// effective on architectures that are fussier about alignment.
+
+	VLD1 0(R6), [V0.B16]
+	VST1 [V0.B16], 0(R7)
+
+	// d += length
+	// s += length
+	ADD R4, R7, R7
+	ADD R4, R6, R6
+	B   loop
+
+callMemmove:
+	// if length > len(dst)-d || length > len(src)-s { etc }
+	CMP R2, R4
+	BGT errCorrupt
+	CMP R3, R4
+	BGT errCorrupt
+
+	// copy(dst[d:], src[s:s+length])
+	//
+	// This means calling runtime·memmove(&dst[d], &src[s], length), so we push
+	// R7, R6 and R4 as arguments. Coincidentally, we also need to spill those
+	// three registers to the stack, to save local variables across the CALL.
+	MOVD R7, 8(RSP)
+	MOVD R6, 16(RSP)
+	MOVD R4, 24(RSP)
+	MOVD R7, 32(RSP)
+	MOVD R6, 40(RSP)
+	MOVD R4, 48(RSP)
+	CALL runtime·memmove(SB)
+
+	// Restore local variables: unspill registers from the stack and
+	// re-calculate R8-R13.
+	MOVD 32(RSP), R7
+	MOVD 40(RSP), R6
+	MOVD 48(RSP), R4
+	MOVD dst_base+0(FP), R8
+	MOVD dst_len+8(FP), R9
+	MOVD R8, R10
+	ADD  R9, R10, R10
+	MOVD src_base+24(FP), R11
+	MOVD src_len+32(FP), R12
+	MOVD R11, R13
+	ADD  R12, R13, R13
+
+	// d += length
+	// s += length
+	ADD R4, R7, R7
+	ADD R4, R6, R6
+	B   loop
+
+tagLit60Plus:
+	// !!! This fragment does the
+	//
+	// s += x - 58; if uint(s) > uint(len(src)) { etc }
+	//
+	// checks. In the asm version, we code it once instead of once per switch case.
+	ADD  R4, R6, R6
+	SUB  $58, R6, R6
+	MOVD R6, R3
+	SUB  R11, R3, R3
+	CMP  R12, R3
+	BGT  errCorrupt
+
+	// case x == 60:
+	MOVW $61, R1
+	CMPW R1, R4
+	BEQ  tagLit61
+	BGT  tagLit62Plus
+
+	// x = uint32(src[s-1])
+	MOVBU -1(R6), R4
+	B     doLit
+
+tagLit61:
+	// case x == 61:
+	// x = uint32(src[s-2]) | uint32(src[s-1])<<8
+	MOVHU -2(R6), R4
+	B     doLit
+
+tagLit62Plus:
+	MOVW $62, R1
+	CMPW R1, R4
+	BHI  tagLit63
+
+	// case x == 62:
+	// x = uint32(src[s-3]) | uint32(src[s-2])<<8 | uint32(src[s-1])<<16
+	MOVHU -3(R6), R4
+	MOVBU -1(R6), R3
+	ORR   R3<<16, R4
+	B     doLit
+
+tagLit63:
+	// case x == 63:
+	// x = uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24
+	MOVWU -4(R6), R4
+	B     doLit
+
+	// The code above handles literal tags.
+	// ----------------------------------------
+	// The code below handles copy tags.
+
+tagCopy4:
+	// case tagCopy4:
+	// s += 5
+	ADD $5, R6, R6
+
+	// if uint(s) > uint(len(src)) { etc }
+	MOVD R6, R3
+	SUB  R11, R3, R3
+	CMP  R12, R3
+	BGT  errCorrupt
+
+	// length = 1 + int(src[s-5])>>2
+	MOVD $1, R1
+	ADD  R4>>2, R1, R4
+
+	// offset = int(uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24)
+	MOVWU -4(R6), R5
+	B     doCopy
+
+tagCopy2:
+	// case tagCopy2:
+	// s += 3
+	ADD $3, R6, R6
+
+	// if uint(s) > uint(len(src)) { etc }
+	MOVD R6, R3
+	SUB  R11, R3, R3
+	CMP  R12, R3
+	BGT  errCorrupt
+
+	// length = 1 + int(src[s-3])>>2
+	MOVD $1, R1
+	ADD  R4>>2, R1, R4
+
+	// offset = int(uint32(src[s-2]) | uint32(src[s-1])<<8)
+	MOVHU -2(R6), R5
+	B     doCopy
+
+tagCopy:
+	// We have a copy tag. We assume that:
+	//	- R3 == src[s] & 0x03
+	//	- R4 == src[s]
+	MOVD $2, R1
+	CMP  R1, R3
+	BEQ  tagCopy2
+	BGT  tagCopy4
+
+	// case tagCopy1:
+	// s += 2
+	ADD $2, R6, R6
+
+	// if uint(s) > uint(len(src)) { etc }
+	MOVD R6, R3
+	SUB  R11, R3, R3
+	CMP  R12, R3
+	BGT  errCorrupt
+
+	// offset = int(uint32(src[s-2])&0xe0<<3 | uint32(src[s-1]))
+	MOVD  R4, R5
+	AND   $0xe0, R5
+	MOVBU -1(R6), R3
+	ORR   R5<<3, R3, R5
+
+	// length = 4 + int(src[s-2])>>2&0x7
+	MOVD $7, R1
+	AND  R4>>2, R1, R4
+	ADD  $4, R4, R4
+
+doCopy:
+	// This is the end of the outer "switch", when we have a copy tag.
+	//
+	// We assume that:
+	//	- R4 == length && R4 > 0
+	//	- R5 == offset
+
+	// if offset <= 0 { etc }
+	MOVD $0, R1
+	CMP  R1, R5
+	BLE  errCorrupt
+
+	// if d < offset { etc }
+	MOVD R7, R3
+	SUB  R8, R3, R3
+	CMP  R5, R3
+	BLT  errCorrupt
+
+	// if length > len(dst)-d { etc }
+	MOVD R10, R3
+	SUB  R7, R3, R3
+	CMP  R3, R4
+	BGT  errCorrupt
+
+	// forwardCopy(dst[d:d+length], dst[d-offset:]); d += length
+	//
+	// Set:
+	//	- R14 = len(dst)-d
+	//	- R15 = &dst[d-offset]
+	MOVD R10, R14
+	SUB  R7, R14, R14
+	MOVD R7, R15
+	SUB  R5, R15, R15
+
+	// !!! Try a faster technique for short (16 or fewer bytes) forward copies.
+	//
+	// First, try using two 8-byte load/stores, similar to the doLit technique
+	// above. Even if dst[d:d+length] and dst[d-offset:] can overlap, this is
+	// still OK if offset >= 8. Note that this has to be two 8-byte load/stores
+	// and not one 16-byte load/store, and the first store has to be before the
+	// second load, due to the overlap if offset is in the range [8, 16).
+	//
+	// if length > 16 || offset < 8 || len(dst)-d < 16 {
+	//   goto slowForwardCopy
+	// }
+	// copy 16 bytes
+	// d += length
+	MOVD $16, R1
+	MOVD $8, R0
+	CMP  R1, R4
+	BGT  slowForwardCopy
+	CMP  R0, R5
+	BLT  slowForwardCopy
+	CMP  R1, R14
+	BLT  slowForwardCopy
+	MOVD 0(R15), R2
+	MOVD R2, 0(R7)
+	MOVD 8(R15), R3
+	MOVD R3, 8(R7)
+	ADD  R4, R7, R7
+	B    loop
+
+slowForwardCopy:
+	// !!! If the forward copy is longer than 16 bytes, or if offset < 8, we
+	// can still try 8-byte load stores, provided we can overrun up to 10 extra
+	// bytes. As above, the overrun will be fixed up by subsequent iterations
+	// of the outermost loop.
+	//
+	// The C++ snappy code calls this technique IncrementalCopyFastPath. Its
+	// commentary says:
+	//
+	// ----
+	//
+	// The main part of this loop is a simple copy of eight bytes at a time
+	// until we've copied (at least) the requested amount of bytes.  However,
+	// if d and d-offset are less than eight bytes apart (indicating a
+	// repeating pattern of length < 8), we first need to expand the pattern in
+	// order to get the correct results. For instance, if the buffer looks like
+	// this, with the eight-byte <d-offset> and <d> patterns marked as
+	// intervals:
+	//
+	//    abxxxxxxxxxxxx
+	//    [------]           d-offset
+	//      [------]         d
+	//
+	// a single eight-byte copy from <d-offset> to <d> will repeat the pattern
+	// once, after which we can move <d> two bytes without moving <d-offset>:
+	//
+	//    ababxxxxxxxxxx
+	//    [------]           d-offset
+	//        [------]       d
+	//
+	// and repeat the exercise until the two no longer overlap.
+	//
+	// This allows us to do very well in the special case of one single byte
+	// repeated many times, without taking a big hit for more general cases.
+	//
+	// The worst case of extra writing past the end of the match occurs when
+	// offset == 1 and length == 1; the last copy will read from byte positions
+	// [0..7] and write to [4..11], whereas it was only supposed to write to
+	// position 1. Thus, ten excess bytes.
+	//
+	// ----
+	//
+	// That "10 byte overrun" worst case is confirmed by Go's
+	// TestSlowForwardCopyOverrun, which also tests the fixUpSlowForwardCopy
+	// and finishSlowForwardCopy algorithm.
+	//
+	// if length > len(dst)-d-10 {
+	//   goto verySlowForwardCopy
+	// }
+	SUB $10, R14, R14
+	CMP R14, R4
+	BGT verySlowForwardCopy
+
+makeOffsetAtLeast8:
+	// !!! As above, expand the pattern so that offset >= 8 and we can use
+	// 8-byte load/stores.
+	//
+	// for offset < 8 {
+	//   copy 8 bytes from dst[d-offset:] to dst[d:]
+	//   length -= offset
+	//   d      += offset
+	//   offset += offset
+	//   // The two previous lines together means that d-offset, and therefore
+	//   // R15, is unchanged.
+	// }
+	MOVD $8, R1
+	CMP  R1, R5
+	BGE  fixUpSlowForwardCopy
+	MOVD (R15), R3
+	MOVD R3, (R7)
+	SUB  R5, R4, R4
+	ADD  R5, R7, R7
+	ADD  R5, R5, R5
+	B    makeOffsetAtLeast8
+
+fixUpSlowForwardCopy:
+	// !!! Add length (which might be negative now) to d (implied by R7 being
+	// &dst[d]) so that d ends up at the right place when we jump back to the
+	// top of the loop. Before we do that, though, we save R7 to R2 so that, if
+	// length is positive, copying the remaining length bytes will write to the
+	// right place.
+	MOVD R7, R2
+	ADD  R4, R7, R7
+
+finishSlowForwardCopy:
+	// !!! Repeat 8-byte load/stores until length <= 0. Ending with a negative
+	// length means that we overrun, but as above, that will be fixed up by
+	// subsequent iterations of the outermost loop.
+	MOVD $0, R1
+	CMP  R1, R4
+	BLE  loop
+	MOVD (R15), R3
+	MOVD R3, (R2)
+	ADD  $8, R15, R15
+	ADD  $8, R2, R2
+	SUB  $8, R4, R4
+	B    finishSlowForwardCopy
+
+verySlowForwardCopy:
+	// verySlowForwardCopy is a simple implementation of forward copy. In C
+	// parlance, this is a do/while loop instead of a while loop, since we know
+	// that length > 0. In Go syntax:
+	//
+	// for {
+	//   dst[d] = dst[d - offset]
+	//   d++
+	//   length--
+	//   if length == 0 {
+	//     break
+	//   }
+	// }
+	MOVB (R15), R3
+	MOVB R3, (R7)
+	ADD  $1, R15, R15
+	ADD  $1, R7, R7
+	SUB  $1, R4, R4
+	MOVD $0, R1
+	CMP  R1, R4
+	BNE  verySlowForwardCopy
+	B    loop
+
+	// The code above handles copy tags.
+	// ----------------------------------------
+
+end:
+	// This is the end of the "for s < len(src)".
+	//
+	// if d != len(dst) { etc }
+	CMP R10, R7
+	BNE errCorrupt
+
+	// return 0
+	MOVD $0, ret+48(FP)
+	RET
+
+errCorrupt:
+	// return decodeErrCodeCorrupt
+	MOVD $1, R2
+	MOVD R2, ret+48(FP)
+	RET

vendor/github.com/golang/snappy/decode_asm.go

@@ -5,6 +5,7 @@
 // +build !appengine
 // +build gc
 // +build !noasm
+// +build amd64 arm64
 
 package snappy
 

vendor/github.com/golang/snappy/decode_other.go

@@ -2,7 +2,7 @@
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.
 
-// +build !amd64 appengine !gc noasm
+// +build !amd64,!arm64 appengine !gc noasm
 
 package snappy
 
@@ -85,14 +85,28 @@ func decode(dst, src []byte) int {
 		if offset <= 0 || d < offset || length > len(dst)-d {
 			return decodeErrCodeCorrupt
 		}
-		// Copy from an earlier sub-slice of dst to a later sub-slice. Unlike
+		// Copy from an earlier sub-slice of dst to a later sub-slice.
-		// the built-in copy function, this byte-by-byte copy always runs
+		// If no overlap, use the built-in copy:
+		if offset >= length {
+			copy(dst[d:d+length], dst[d-offset:])
+			d += length
+			continue
+		}
+
+		// Unlike the built-in copy function, this byte-by-byte copy always runs
 		// forwards, even if the slices overlap. Conceptually, this is:
 		//
 		// d += forwardCopy(dst[d:d+length], dst[d-offset:])
-		for end := d + length; d != end; d++ {
+		//
-			dst[d] = dst[d-offset]
+		// We align the slices into a and b and show the compiler they are the same size.
+		// This allows the loop to run without bounds checks.
+		a := dst[d : d+length]
+		b := dst[d-offset:]
+		b = b[:len(a)]
+		for i := range a {
+			a[i] = b[i]
 		}
+		d += length
 	}
 	if d != len(dst) {
 		return decodeErrCodeCorrupt

vendor/github.com/golang/snappy/encode.go

@@ -15,6 +15,8 @@ import (
 // Otherwise, a newly allocated slice will be returned.
 //
 // The dst and src must not overlap. It is valid to pass a nil dst.
+//
+// Encode handles the Snappy block format, not the Snappy stream format.
 func Encode(dst, src []byte) []byte {
 	if n := MaxEncodedLen(len(src)); n < 0 {
 		panic(ErrTooLarge)
@@ -139,6 +141,8 @@ func NewBufferedWriter(w io.Writer) *Writer {
 }
 
 // Writer is an io.Writer that can write Snappy-compressed bytes.
+//
+// Writer handles the Snappy stream format, not the Snappy block format.
 type Writer struct {
 	w   io.Writer
 	err error

vendor/github.com/golang/snappy/encode_arm64.s

@@ -0,0 +1,729 @@
+// Copyright 2020 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build !appengine
+// +build gc
+// +build !noasm
+
+#include "textflag.h"
+
+// The asm code generally follows the pure Go code in encode_other.go, except
+// where marked with a "!!!".
+
+// ----------------------------------------------------------------------------
+
+// func emitLiteral(dst, lit []byte) int
+//
+// All local variables fit into registers. The register allocation:
+//	- R3	len(lit)
+//	- R4	n
+//	- R6	return value
+//	- R8	&dst[i]
+//	- R10	&lit[0]
+//
+// The 32 bytes of stack space is to call runtime·memmove.
+//
+// The unusual register allocation of local variables, such as R10 for the
+// source pointer, matches the allocation used at the call site in encodeBlock,
+// which makes it easier to manually inline this function.
+TEXT ·emitLiteral(SB), NOSPLIT, $32-56
+	MOVD dst_base+0(FP), R8
+	MOVD lit_base+24(FP), R10
+	MOVD lit_len+32(FP), R3
+	MOVD R3, R6
+	MOVW R3, R4
+	SUBW $1, R4, R4
+
+	MOVW $60, R2
+	CMPW R2, R4
+	BLT  oneByte
+	MOVW $256, R2
+	CMPW R2, R4
+	BLT  twoBytes
+
+threeBytes:
+	MOVD $0xf4, R2
+	MOVB R2, 0(R8)
+	MOVW R4, 1(R8)
+	ADD  $3, R8, R8
+	ADD  $3, R6, R6
+	B    memmove
+
+twoBytes:
+	MOVD $0xf0, R2
+	MOVB R2, 0(R8)
+	MOVB R4, 1(R8)
+	ADD  $2, R8, R8
+	ADD  $2, R6, R6
+	B    memmove
+
+oneByte:
+	LSLW $2, R4, R4
+	MOVB R4, 0(R8)
+	ADD  $1, R8, R8
+	ADD  $1, R6, R6
+
+memmove:
+	MOVD R6, ret+48(FP)
+
+	// copy(dst[i:], lit)
+	//
+	// This means calling runtime·memmove(&dst[i], &lit[0], len(lit)), so we push
+	// R8, R10 and R3 as arguments.
+	MOVD R8, 8(RSP)
+	MOVD R10, 16(RSP)
+	MOVD R3, 24(RSP)
+	CALL runtime·memmove(SB)
+	RET
+
+// ----------------------------------------------------------------------------
+
+// func emitCopy(dst []byte, offset, length int) int
+//
+// All local variables fit into registers. The register allocation:
+//	- R3	length
+//	- R7	&dst[0]
+//	- R8	&dst[i]
+//	- R11	offset
+//
+// The unusual register allocation of local variables, such as R11 for the
+// offset, matches the allocation used at the call site in encodeBlock, which
+// makes it easier to manually inline this function.
+TEXT ·emitCopy(SB), NOSPLIT, $0-48
+	MOVD dst_base+0(FP), R8
+	MOVD R8, R7
+	MOVD offset+24(FP), R11
+	MOVD length+32(FP), R3
+
+loop0:
+	// for length >= 68 { etc }
+	MOVW $68, R2
+	CMPW R2, R3
+	BLT  step1
+
+	// Emit a length 64 copy, encoded as 3 bytes.
+	MOVD $0xfe, R2
+	MOVB R2, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+	SUB  $64, R3, R3
+	B    loop0
+
+step1:
+	// if length > 64 { etc }
+	MOVD $64, R2
+	CMP  R2, R3
+	BLE  step2
+
+	// Emit a length 60 copy, encoded as 3 bytes.
+	MOVD $0xee, R2
+	MOVB R2, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+	SUB  $60, R3, R3
+
+step2:
+	// if length >= 12 || offset >= 2048 { goto step3 }
+	MOVD $12, R2
+	CMP  R2, R3
+	BGE  step3
+	MOVW $2048, R2
+	CMPW R2, R11
+	BGE  step3
+
+	// Emit the remaining copy, encoded as 2 bytes.
+	MOVB R11, 1(R8)
+	LSRW $3, R11, R11
+	AND  $0xe0, R11, R11
+	SUB  $4, R3, R3
+	LSLW $2, R3
+	AND  $0xff, R3, R3
+	ORRW R3, R11, R11
+	ORRW $1, R11, R11
+	MOVB R11, 0(R8)
+	ADD  $2, R8, R8
+
+	// Return the number of bytes written.
+	SUB  R7, R8, R8
+	MOVD R8, ret+40(FP)
+	RET
+
+step3:
+	// Emit the remaining copy, encoded as 3 bytes.
+	SUB  $1, R3, R3
+	AND  $0xff, R3, R3
+	LSLW $2, R3, R3
+	ORRW $2, R3, R3
+	MOVB R3, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+
+	// Return the number of bytes written.
+	SUB  R7, R8, R8
+	MOVD R8, ret+40(FP)
+	RET
+
+// ----------------------------------------------------------------------------
+
+// func extendMatch(src []byte, i, j int) int
+//
+// All local variables fit into registers. The register allocation:
+//	- R6	&src[0]
+//	- R7	&src[j]
+//	- R13	&src[len(src) - 8]
+//	- R14	&src[len(src)]
+//	- R15	&src[i]
+//
+// The unusual register allocation of local variables, such as R15 for a source
+// pointer, matches the allocation used at the call site in encodeBlock, which
+// makes it easier to manually inline this function.
+TEXT ·extendMatch(SB), NOSPLIT, $0-48
+	MOVD src_base+0(FP), R6
+	MOVD src_len+8(FP), R14
+	MOVD i+24(FP), R15
+	MOVD j+32(FP), R7
+	ADD  R6, R14, R14
+	ADD  R6, R15, R15
+	ADD  R6, R7, R7
+	MOVD R14, R13
+	SUB  $8, R13, R13
+
+cmp8:
+	// As long as we are 8 or more bytes before the end of src, we can load and
+	// compare 8 bytes at a time. If those 8 bytes are equal, repeat.
+	CMP  R13, R7
+	BHI  cmp1
+	MOVD (R15), R3
+	MOVD (R7), R4
+	CMP  R4, R3
+	BNE  bsf
+	ADD  $8, R15, R15
+	ADD  $8, R7, R7
+	B    cmp8
+
+bsf:
+	// If those 8 bytes were not equal, XOR the two 8 byte values, and return
+	// the index of the first byte that differs.
+	// RBIT reverses the bit order, then CLZ counts the leading zeros, the
+	// combination of which finds the least significant bit which is set.
+	// The arm64 architecture is little-endian, and the shift by 3 converts
+	// a bit index to a byte index.
+	EOR  R3, R4, R4
+	RBIT R4, R4
+	CLZ  R4, R4
+	ADD  R4>>3, R7, R7
+
+	// Convert from &src[ret] to ret.
+	SUB  R6, R7, R7
+	MOVD R7, ret+40(FP)
+	RET
+
+cmp1:
+	// In src's tail, compare 1 byte at a time.
+	CMP  R7, R14
+	BLS  extendMatchEnd
+	MOVB (R15), R3
+	MOVB (R7), R4
+	CMP  R4, R3
+	BNE  extendMatchEnd
+	ADD  $1, R15, R15
+	ADD  $1, R7, R7
+	B    cmp1
+
+extendMatchEnd:
+	// Convert from &src[ret] to ret.
+	SUB  R6, R7, R7
+	MOVD R7, ret+40(FP)
+	RET
+
+// ----------------------------------------------------------------------------
+
+// func encodeBlock(dst, src []byte) (d int)
+//
+// All local variables fit into registers, other than "var table". The register
+// allocation:
+//	- R3	.	.
+//	- R4	.	.
+//	- R5	64	shift
+//	- R6	72	&src[0], tableSize
+//	- R7	80	&src[s]
+//	- R8	88	&dst[d]
+//	- R9	96	sLimit
+//	- R10	.	&src[nextEmit]
+//	- R11	104	prevHash, currHash, nextHash, offset
+//	- R12	112	&src[base], skip
+//	- R13	.	&src[nextS], &src[len(src) - 8]
+//	- R14	.	len(src), bytesBetweenHashLookups, &src[len(src)], x
+//	- R15	120	candidate
+//	- R16	.	hash constant, 0x1e35a7bd
+//	- R17	.	&table
+//	- .  	128	table
+//
+// The second column (64, 72, etc) is the stack offset to spill the registers
+// when calling other functions. We could pack this slightly tighter, but it's
+// simpler to have a dedicated spill map independent of the function called.
+//
+// "var table [maxTableSize]uint16" takes up 32768 bytes of stack space. An
+// extra 64 bytes, to call other functions, and an extra 64 bytes, to spill
+// local variables (registers) during calls gives 32768 + 64 + 64 = 32896.
+TEXT ·encodeBlock(SB), 0, $32896-56
+	MOVD dst_base+0(FP), R8
+	MOVD src_base+24(FP), R7
+	MOVD src_len+32(FP), R14
+
+	// shift, tableSize := uint32(32-8), 1<<8
+	MOVD  $24, R5
+	MOVD  $256, R6
+	MOVW  $0xa7bd, R16
+	MOVKW $(0x1e35<<16), R16
+
+calcShift:
+	// for ; tableSize < maxTableSize && tableSize < len(src); tableSize *= 2 {
+	//	shift--
+	// }
+	MOVD $16384, R2
+	CMP  R2, R6
+	BGE  varTable
+	CMP  R14, R6
+	BGE  varTable
+	SUB  $1, R5, R5
+	LSL  $1, R6, R6
+	B    calcShift
+
+varTable:
+	// var table [maxTableSize]uint16
+	//
+	// In the asm code, unlike the Go code, we can zero-initialize only the
+	// first tableSize elements. Each uint16 element is 2 bytes and each VST1
+	// writes 64 bytes, so we can do only tableSize/32 writes instead of the
+	// 2048 writes that would zero-initialize all of table's 32768 bytes.
+	// This clear could overrun the first tableSize elements, but it won't
+	// overrun the allocated stack size.
+	ADD  $128, RSP, R17
+	MOVD R17, R4
+
+	// !!! R6 = &src[tableSize]
+	ADD R6<<1, R17, R6
+
+	// zero the SIMD registers
+	VEOR V0.B16, V0.B16, V0.B16
+	VEOR V1.B16, V1.B16, V1.B16
+	VEOR V2.B16, V2.B16, V2.B16
+	VEOR V3.B16, V3.B16, V3.B16
+
+memclr:
+	VST1.P [V0.B16, V1.B16, V2.B16, V3.B16], 64(R4)
+	CMP    R4, R6
+	BHI    memclr
+
+	// !!! R6 = &src[0]
+	MOVD R7, R6
+
+	// sLimit := len(src) - inputMargin
+	MOVD R14, R9
+	SUB  $15, R9, R9
+
+	// !!! Pre-emptively spill R5, R6 and R9 to the stack. Their values don't
+	// change for the rest of the function.
+	MOVD R5, 64(RSP)
+	MOVD R6, 72(RSP)
+	MOVD R9, 96(RSP)
+
+	// nextEmit := 0
+	MOVD R6, R10
+
+	// s := 1
+	ADD $1, R7, R7
+
+	// nextHash := hash(load32(src, s), shift)
+	MOVW 0(R7), R11
+	MULW R16, R11, R11
+	LSRW R5, R11, R11
+
+outer:
+	// for { etc }
+
+	// skip := 32
+	MOVD $32, R12
+
+	// nextS := s
+	MOVD R7, R13
+
+	// candidate := 0
+	MOVD $0, R15
+
+inner0:
+	// for { etc }
+
+	// s := nextS
+	MOVD R13, R7
+
+	// bytesBetweenHashLookups := skip >> 5
+	MOVD R12, R14
+	LSR  $5, R14, R14
+
+	// nextS = s + bytesBetweenHashLookups
+	ADD R14, R13, R13
+
+	// skip += bytesBetweenHashLookups
+	ADD R14, R12, R12
+
+	// if nextS > sLimit { goto emitRemainder }
+	MOVD R13, R3
+	SUB  R6, R3, R3
+	CMP  R9, R3
+	BHI  emitRemainder
+
+	// candidate = int(table[nextHash])
+	MOVHU 0(R17)(R11<<1), R15
+
+	// table[nextHash] = uint16(s)
+	MOVD R7, R3
+	SUB  R6, R3, R3
+
+	MOVH R3, 0(R17)(R11<<1)
+
+	// nextHash = hash(load32(src, nextS), shift)
+	MOVW 0(R13), R11
+	MULW R16, R11
+	LSRW R5, R11, R11
+
+	// if load32(src, s) != load32(src, candidate) { continue } break
+	MOVW 0(R7), R3
+	MOVW (R6)(R15*1), R4
+	CMPW R4, R3
+	BNE  inner0
+
+fourByteMatch:
+	// As per the encode_other.go code:
+	//
+	// A 4-byte match has been found. We'll later see etc.
+
+	// !!! Jump to a fast path for short (<= 16 byte) literals. See the comment
+	// on inputMargin in encode.go.
+	MOVD R7, R3
+	SUB  R10, R3, R3
+	MOVD $16, R2
+	CMP  R2, R3
+	BLE  emitLiteralFastPath
+
+	// ----------------------------------------
+	// Begin inline of the emitLiteral call.
+	//
+	// d += emitLiteral(dst[d:], src[nextEmit:s])
+
+	MOVW R3, R4
+	SUBW $1, R4, R4
+
+	MOVW $60, R2
+	CMPW R2, R4
+	BLT  inlineEmitLiteralOneByte
+	MOVW $256, R2
+	CMPW R2, R4
+	BLT  inlineEmitLiteralTwoBytes
+
+inlineEmitLiteralThreeBytes:
+	MOVD $0xf4, R1
+	MOVB R1, 0(R8)
+	MOVW R4, 1(R8)
+	ADD  $3, R8, R8
+	B    inlineEmitLiteralMemmove
+
+inlineEmitLiteralTwoBytes:
+	MOVD $0xf0, R1
+	MOVB R1, 0(R8)
+	MOVB R4, 1(R8)
+	ADD  $2, R8, R8
+	B    inlineEmitLiteralMemmove
+
+inlineEmitLiteralOneByte:
+	LSLW $2, R4, R4
+	MOVB R4, 0(R8)
+	ADD  $1, R8, R8
+
+inlineEmitLiteralMemmove:
+	// Spill local variables (registers) onto the stack; call; unspill.
+	//
+	// copy(dst[i:], lit)
+	//
+	// This means calling runtime·memmove(&dst[i], &lit[0], len(lit)), so we push
+	// R8, R10 and R3 as arguments.
+	MOVD R8, 8(RSP)
+	MOVD R10, 16(RSP)
+	MOVD R3, 24(RSP)
+
+	// Finish the "d +=" part of "d += emitLiteral(etc)".
+	ADD  R3, R8, R8
+	MOVD R7, 80(RSP)
+	MOVD R8, 88(RSP)
+	MOVD R15, 120(RSP)
+	CALL runtime·memmove(SB)
+	MOVD 64(RSP), R5
+	MOVD 72(RSP), R6
+	MOVD 80(RSP), R7
+	MOVD 88(RSP), R8
+	MOVD 96(RSP), R9
+	MOVD 120(RSP), R15
+	B    inner1
+
+inlineEmitLiteralEnd:
+	// End inline of the emitLiteral call.
+	// ----------------------------------------
+
+emitLiteralFastPath:
+	// !!! Emit the 1-byte encoding "uint8(len(lit)-1)<<2".
+	MOVB R3, R4
+	SUBW $1, R4, R4
+	AND  $0xff, R4, R4
+	LSLW $2, R4, R4
+	MOVB R4, (R8)
+	ADD  $1, R8, R8
+
+	// !!! Implement the copy from lit to dst as a 16-byte load and store.
+	// (Encode's documentation says that dst and src must not overlap.)
+	//
+	// This always copies 16 bytes, instead of only len(lit) bytes, but that's
+	// OK. Subsequent iterations will fix up the overrun.
+	//
+	// Note that on arm64, it is legal and cheap to issue unaligned 8-byte or
+	// 16-byte loads and stores. This technique probably wouldn't be as
+	// effective on architectures that are fussier about alignment.
+	VLD1 0(R10), [V0.B16]
+	VST1 [V0.B16], 0(R8)
+	ADD  R3, R8, R8
+
+inner1:
+	// for { etc }
+
+	// base := s
+	MOVD R7, R12
+
+	// !!! offset := base - candidate
+	MOVD R12, R11
+	SUB  R15, R11, R11
+	SUB  R6, R11, R11
+
+	// ----------------------------------------
+	// Begin inline of the extendMatch call.
+	//
+	// s = extendMatch(src, candidate+4, s+4)
+
+	// !!! R14 = &src[len(src)]
+	MOVD src_len+32(FP), R14
+	ADD  R6, R14, R14
+
+	// !!! R13 = &src[len(src) - 8]
+	MOVD R14, R13
+	SUB  $8, R13, R13
+
+	// !!! R15 = &src[candidate + 4]
+	ADD $4, R15, R15
+	ADD R6, R15, R15
+
+	// !!! s += 4
+	ADD $4, R7, R7
+
+inlineExtendMatchCmp8:
+	// As long as we are 8 or more bytes before the end of src, we can load and
+	// compare 8 bytes at a time. If those 8 bytes are equal, repeat.
+	CMP  R13, R7
+	BHI  inlineExtendMatchCmp1
+	MOVD (R15), R3
+	MOVD (R7), R4
+	CMP  R4, R3
+	BNE  inlineExtendMatchBSF
+	ADD  $8, R15, R15
+	ADD  $8, R7, R7
+	B    inlineExtendMatchCmp8
+
+inlineExtendMatchBSF:
+	// If those 8 bytes were not equal, XOR the two 8 byte values, and return
+	// the index of the first byte that differs.
+	// RBIT reverses the bit order, then CLZ counts the leading zeros, the
+	// combination of which finds the least significant bit which is set.
+	// The arm64 architecture is little-endian, and the shift by 3 converts
+	// a bit index to a byte index.
+	EOR  R3, R4, R4
+	RBIT R4, R4
+	CLZ  R4, R4
+	ADD  R4>>3, R7, R7
+	B    inlineExtendMatchEnd
+
+inlineExtendMatchCmp1:
+	// In src's tail, compare 1 byte at a time.
+	CMP  R7, R14
+	BLS  inlineExtendMatchEnd
+	MOVB (R15), R3
+	MOVB (R7), R4
+	CMP  R4, R3
+	BNE  inlineExtendMatchEnd
+	ADD  $1, R15, R15
+	ADD  $1, R7, R7
+	B    inlineExtendMatchCmp1
+
+inlineExtendMatchEnd:
+	// End inline of the extendMatch call.
+	// ----------------------------------------
+
+	// ----------------------------------------
+	// Begin inline of the emitCopy call.
+	//
+	// d += emitCopy(dst[d:], base-candidate, s-base)
+
+	// !!! length := s - base
+	MOVD R7, R3
+	SUB  R12, R3, R3
+
+inlineEmitCopyLoop0:
+	// for length >= 68 { etc }
+	MOVW $68, R2
+	CMPW R2, R3
+	BLT  inlineEmitCopyStep1
+
+	// Emit a length 64 copy, encoded as 3 bytes.
+	MOVD $0xfe, R1
+	MOVB R1, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+	SUBW $64, R3, R3
+	B    inlineEmitCopyLoop0
+
+inlineEmitCopyStep1:
+	// if length > 64 { etc }
+	MOVW $64, R2
+	CMPW R2, R3
+	BLE  inlineEmitCopyStep2
+
+	// Emit a length 60 copy, encoded as 3 bytes.
+	MOVD $0xee, R1
+	MOVB R1, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+	SUBW $60, R3, R3
+
+inlineEmitCopyStep2:
+	// if length >= 12 || offset >= 2048 { goto inlineEmitCopyStep3 }
+	MOVW $12, R2
+	CMPW R2, R3
+	BGE  inlineEmitCopyStep3
+	MOVW $2048, R2
+	CMPW R2, R11
+	BGE  inlineEmitCopyStep3
+
+	// Emit the remaining copy, encoded as 2 bytes.
+	MOVB R11, 1(R8)
+	LSRW $8, R11, R11
+	LSLW $5, R11, R11
+	SUBW $4, R3, R3
+	AND  $0xff, R3, R3
+	LSLW $2, R3, R3
+	ORRW R3, R11, R11
+	ORRW $1, R11, R11
+	MOVB R11, 0(R8)
+	ADD  $2, R8, R8
+	B    inlineEmitCopyEnd
+
+inlineEmitCopyStep3:
+	// Emit the remaining copy, encoded as 3 bytes.
+	SUBW $1, R3, R3
+	LSLW $2, R3, R3
+	ORRW $2, R3, R3
+	MOVB R3, 0(R8)
+	MOVW R11, 1(R8)
+	ADD  $3, R8, R8
+
+inlineEmitCopyEnd:
+	// End inline of the emitCopy call.
+	// ----------------------------------------
+
+	// nextEmit = s
+	MOVD R7, R10
+
+	// if s >= sLimit { goto emitRemainder }
+	MOVD R7, R3
+	SUB  R6, R3, R3
+	CMP  R3, R9
+	BLS  emitRemainder
+
+	// As per the encode_other.go code:
+	//
+	// We could immediately etc.
+
+	// x := load64(src, s-1)
+	MOVD -1(R7), R14
+
+	// prevHash := hash(uint32(x>>0), shift)
+	MOVW R14, R11
+	MULW R16, R11, R11
+	LSRW R5, R11, R11
+
+	// table[prevHash] = uint16(s-1)
+	MOVD R7, R3
+	SUB  R6, R3, R3
+	SUB  $1, R3, R3
+
+	MOVHU R3, 0(R17)(R11<<1)
+
+	// currHash := hash(uint32(x>>8), shift)
+	LSR  $8, R14, R14
+	MOVW R14, R11
+	MULW R16, R11, R11
+	LSRW R5, R11, R11
+
+	// candidate = int(table[currHash])
+	MOVHU 0(R17)(R11<<1), R15
+
+	// table[currHash] = uint16(s)
+	ADD   $1, R3, R3
+	MOVHU R3, 0(R17)(R11<<1)
+
+	// if uint32(x>>8) == load32(src, candidate) { continue }
+	MOVW (R6)(R15*1), R4
+	CMPW R4, R14
+	BEQ  inner1
+
+	// nextHash = hash(uint32(x>>16), shift)
+	LSR  $8, R14, R14
+	MOVW R14, R11
+	MULW R16, R11, R11
+	LSRW R5, R11, R11
+
+	// s++
+	ADD $1, R7, R7
+
+	// break out of the inner1 for loop, i.e. continue the outer loop.
+	B outer
+
+emitRemainder:
+	// if nextEmit < len(src) { etc }
+	MOVD src_len+32(FP), R3
+	ADD  R6, R3, R3
+	CMP  R3, R10
+	BEQ  encodeBlockEnd
+
+	// d += emitLiteral(dst[d:], src[nextEmit:])
+	//
+	// Push args.
+	MOVD R8, 8(RSP)
+	MOVD $0, 16(RSP)  // Unnecessary, as the callee ignores it, but conservative.
+	MOVD $0, 24(RSP)  // Unnecessary, as the callee ignores it, but conservative.
+	MOVD R10, 32(RSP)
+	SUB  R10, R3, R3
+	MOVD R3, 40(RSP)
+	MOVD R3, 48(RSP)  // Unnecessary, as the callee ignores it, but conservative.
+
+	// Spill local variables (registers) onto the stack; call; unspill.
+	MOVD R8, 88(RSP)
+	CALL ·emitLiteral(SB)
+	MOVD 88(RSP), R8
+
+	// Finish the "d +=" part of "d += emitLiteral(etc)".
+	MOVD 56(RSP), R1
+	ADD  R1, R8, R8
+
+encodeBlockEnd:
+	MOVD dst_base+0(FP), R3
+	SUB  R3, R8, R8
+	MOVD R8, d+48(FP)
+	RET

vendor/github.com/golang/snappy/encode_asm.go

@@ -5,6 +5,7 @@
 // +build !appengine
 // +build gc
 // +build !noasm
+// +build amd64 arm64
 
 package snappy
 

vendor/github.com/golang/snappy/encode_other.go

@@ -2,7 +2,7 @@
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.
 
-// +build !amd64 appengine !gc noasm
+// +build !amd64,!arm64 appengine !gc noasm
 
 package snappy
 

vendor/github.com/jmespath/go-jmespath/.travis.yml

@@ -12,6 +12,17 @@ go:
   - 1.11.x
   - 1.12.x
   - 1.13.x
+  - 1.14.x
+  - 1.15.x
+  - tip
 
-install: go get -v -t ./...
+allow_failures:
-script: make test
+  - go: tip
+
+script: make build
+
+matrix:
+  include:
+    - language: go
+      go: 1.15.x
+      script: make test

vendor/github.com/jmespath/go-jmespath/Makefile

@@ -1,6 +1,8 @@
 
 CMD = jpgo
 
+SRC_PKGS=./ ./cmd/... ./fuzz/...
+
 help:
 	@echo "Please use \`make <target>' where <target> is one of"
 	@echo "  test                    to run all the tests"
@@ -9,21 +11,22 @@ help:
 
 
 generate:
-	go generate ./...
+	go generate ${SRC_PKGS}
 
 build:
 	rm -f $(CMD)
-	go build ./...
+	go build ${SRC_PKGS}
 	rm -f cmd/$(CMD)/$(CMD) && cd cmd/$(CMD)/ && go build ./...
 	mv cmd/$(CMD)/$(CMD) .
 
-test:
+test: test-internal-testify
-	go test -v ./...
+	echo "making tests ${SRC_PKGS}"
+	go test -v ${SRC_PKGS}
 
 check:
-	go vet ./...
+	go vet ${SRC_PKGS}
-	@echo "golint ./..."
+	@echo "golint ${SRC_PKGS}"
-	@lint=`golint ./...`; \
+	@lint=`golint ${SRC_PKGS}`; \
 	lint=`echo "$$lint" | grep -v "astnodetype_string.go" | grep -v "toktype_string.go"`; \
 	echo "$$lint"; \
 	if [ "$$lint" != "" ]; then exit 1; fi
@@ -42,3 +45,7 @@ bench:
 
 pprof-cpu:
 	go tool pprof ./go-jmespath.test ./cpu.out
+
+test-internal-testify:
+	cd internal/testify && go test ./...
+

vendor/github.com/jmespath/go-jmespath/go.mod

@@ -2,4 +2,4 @@ module github.com/jmespath/go-jmespath
 
 go 1.14
 
-require github.com/stretchr/testify v1.5.1
+require github.com/jmespath/go-jmespath/internal/testify v1.5.1

vendor/github.com/jmespath/go-jmespath/go.sum

@@ -1,11 +1,11 @@
 github.com/davecgh/go-spew v1.1.0 h1:ZDRjVQ15GmhC3fiQ8ni8+OwkZQO4DARzQgrnXU1Liz8=
 github.com/davecgh/go-spew v1.1.0/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
+github.com/jmespath/go-jmespath/internal/testify v1.5.1 h1:shLQSRRSCCPj3f2gpwzGwWFoC7ycTf1rcQZHOlsJ6N8=
+github.com/jmespath/go-jmespath/internal/testify v1.5.1/go.mod h1:L3OGu8Wl2/fWfCI6z80xFu9LTZmf1ZRjMHUOPmWr69U=
 github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM=
 github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
 github.com/stretchr/objx v0.1.0/go.mod h1:HFkY916IF+rwdDfMAkV7OtwuqBVzrE8GR6GFx+wExME=
-github.com/stretchr/testify v1.5.1 h1:nOGnQDM7FYENwehXlg/kFVnos3rEvtKTjRvOWSzb6H4=
-github.com/stretchr/testify v1.5.1/go.mod h1:5W2xD1RspED5o8YsWQXVCued0rvSQ+mT+I5cxcmMvtA=
 gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405 h1:yhCVgyC4o1eVCa2tZl7eS0r+SDo693bJlVdllGtEeKM=
 gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
-gopkg.in/yaml.v2 v2.2.2 h1:ZCJp+EgiOT7lHqUV2J862kp8Qj64Jo6az82+3Td9dZw=
+gopkg.in/yaml.v2 v2.2.8 h1:obN1ZagJSUGI0Ek/LBmuj4SNLPfIny3KsKFopxRdj10=
-gopkg.in/yaml.v2 v2.2.2/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
+gopkg.in/yaml.v2 v2.2.8/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=

vendor/golang.org/x/sys/unix/fcntl_darwin.go

@@ -16,3 +16,9 @@ func FcntlFlock(fd uintptr, cmd int, lk *Flock_t) error {
 	_, err := fcntl(int(fd), cmd, int(uintptr(unsafe.Pointer(lk))))
 	return err
 }
+
+// FcntlFstore performs a fcntl syscall for the F_PREALLOCATE command.
+func FcntlFstore(fd uintptr, cmd int, fstore *Fstore_t) error {
+	_, err := fcntl(int(fd), cmd, int(uintptr(unsafe.Pointer(fstore))))
+	return err
+}

vendor/golang.org/x/sys/unix/mkerrors.sh

@@ -58,6 +58,7 @@ includes_Darwin='
 #define _DARWIN_USE_64_BIT_INODE
 #include <stdint.h>
 #include <sys/attr.h>
+#include <sys/clonefile.h>
 #include <sys/types.h>
 #include <sys/event.h>
 #include <sys/ptrace.h>
@@ -516,6 +517,7 @@ ccflags="$@"
 		$2 ~ /^CP_/ ||
 		$2 ~ /^CPUSTATES$/ ||
 		$2 ~ /^ALG_/ ||
+		$2 ~ /^FI(CLONE|DEDUPERANGE)/ ||
 		$2 ~ /^FS_(POLICY_FLAGS|KEY_DESC|ENCRYPTION_MODE|[A-Z0-9_]+_KEY_SIZE)/ ||
 		$2 ~ /^FS_IOC_.*(ENCRYPTION|VERITY|[GS]ETFLAGS)/ ||
 		$2 ~ /^FS_VERITY_/ ||

vendor/golang.org/x/sys/unix/syscall_illumos.go

@@ -56,7 +56,7 @@ func Pwritev(fd int, iovs [][]byte, off int64) (n int, err error) {
 	return n, err
 }
 
-//sys	accept4(s int, rsa *RawSockaddrAny, addrlen *_Socklen, flags int) (fd int, err error)
+//sys	accept4(s int, rsa *RawSockaddrAny, addrlen *_Socklen, flags int) (fd int, err error) = libsocket.accept4
 
 func Accept4(fd int, flags int) (nfd int, sa Sockaddr, err error) {
 	var rsa RawSockaddrAny

vendor/golang.org/x/sys/unix/syscall_linux.go

@@ -112,6 +112,31 @@ func IoctlGetRTCWkAlrm(fd int) (*RTCWkAlrm, error) {
 	return &value, err
 }
 
+// IoctlFileClone performs an FICLONERANGE ioctl operation to clone the range of
+// data conveyed in value to the file associated with the file descriptor
+// destFd. See the ioctl_ficlonerange(2) man page for details.
+func IoctlFileCloneRange(destFd int, value *FileCloneRange) error {
+	err := ioctl(destFd, FICLONERANGE, uintptr(unsafe.Pointer(value)))
+	runtime.KeepAlive(value)
+	return err
+}
+
+// IoctlFileClone performs an FICLONE ioctl operation to clone the entire file
+// associated with the file description srcFd to the file associated with the
+// file descriptor destFd. See the ioctl_ficlone(2) man page for details.
+func IoctlFileClone(destFd, srcFd int) error {
+	return ioctl(destFd, FICLONE, uintptr(srcFd))
+}
+
+// IoctlFileClone performs an FIDEDUPERANGE ioctl operation to share the range of
+// data conveyed in value with the file associated with the file descriptor
+// destFd. See the ioctl_fideduperange(2) man page for details.
+func IoctlFileDedupeRange(destFd int, value *FileDedupeRange) error {
+	err := ioctl(destFd, FIDEDUPERANGE, uintptr(unsafe.Pointer(value)))
+	runtime.KeepAlive(value)
+	return err
+}
+
 //sys	Linkat(olddirfd int, oldpath string, newdirfd int, newpath string, flags int) (err error)
 
 func Link(oldpath string, newpath string) (err error) {

vendor/golang.org/x/sys/unix/zerrors_darwin_386.go

@@ -232,6 +232,8 @@ const (
 	CLOCK_THREAD_CPUTIME_ID           = 0x10
 	CLOCK_UPTIME_RAW                  = 0x8
 	CLOCK_UPTIME_RAW_APPROX           = 0x9
+	CLONE_NOFOLLOW                    = 0x1
+	CLONE_NOOWNERCOPY                 = 0x2
 	CR0                               = 0x0
 	CR1                               = 0x1000
 	CR2                               = 0x2000

vendor/golang.org/x/sys/unix/zerrors_darwin_amd64.go

@@ -232,6 +232,8 @@ const (
 	CLOCK_THREAD_CPUTIME_ID           = 0x10
 	CLOCK_UPTIME_RAW                  = 0x8
 	CLOCK_UPTIME_RAW_APPROX           = 0x9
+	CLONE_NOFOLLOW                    = 0x1
+	CLONE_NOOWNERCOPY                 = 0x2
 	CR0                               = 0x0
 	CR1                               = 0x1000
 	CR2                               = 0x2000

vendor/golang.org/x/sys/unix/zerrors_darwin_arm.go

@@ -232,6 +232,8 @@ const (
 	CLOCK_THREAD_CPUTIME_ID           = 0x10
 	CLOCK_UPTIME_RAW                  = 0x8
 	CLOCK_UPTIME_RAW_APPROX           = 0x9
+	CLONE_NOFOLLOW                    = 0x1
+	CLONE_NOOWNERCOPY                 = 0x2
 	CR0                               = 0x0
 	CR1                               = 0x1000
 	CR2                               = 0x2000

vendor/golang.org/x/sys/unix/zerrors_darwin_arm64.go

@@ -232,6 +232,8 @@ const (
 	CLOCK_THREAD_CPUTIME_ID           = 0x10
 	CLOCK_UPTIME_RAW                  = 0x8
 	CLOCK_UPTIME_RAW_APPROX           = 0x9
+	CLONE_NOFOLLOW                    = 0x1
+	CLONE_NOOWNERCOPY                 = 0x2
 	CR0                               = 0x0
 	CR1                               = 0x1000
 	CR2                               = 0x2000

vendor/golang.org/x/sys/unix/zerrors_linux.go

@@ -686,6 +686,7 @@ const (
 	FD_CLOEXEC                                  = 0x1
 	FD_SETSIZE                                  = 0x400
 	FF0                                         = 0x0
+	FIDEDUPERANGE                               = 0xc0189436
 	FSCRYPT_KEY_DESCRIPTOR_SIZE                 = 0x8
 	FSCRYPT_KEY_DESC_PREFIX                     = "fscrypt:"
 	FSCRYPT_KEY_DESC_PREFIX_SIZE                = 0x8

vendor/golang.org/x/sys/unix/zerrors_linux_386.go

@@ -71,6 +71,8 @@ const (
 	EXTPROC                          = 0x10000
 	FF1                              = 0x8000
 	FFDLY                            = 0x8000
+	FICLONE                          = 0x40049409
+	FICLONERANGE                     = 0x4020940d
 	FLUSHO                           = 0x1000
 	FP_XSTATE_MAGIC2                 = 0x46505845
 	FS_IOC_ENABLE_VERITY             = 0x40806685

vendor/golang.org/x/sys/unix/zerrors_linux_amd64.go

@@ -71,6 +71,8 @@ const (
 	EXTPROC                          = 0x10000
 	FF1                              = 0x8000
 	FFDLY                            = 0x8000
+	FICLONE                          = 0x40049409
+	FICLONERANGE                     = 0x4020940d
 	FLUSHO                           = 0x1000
 	FP_XSTATE_MAGIC2                 = 0x46505845
 	FS_IOC_ENABLE_VERITY             = 0x40806685

vendor/golang.org/x/sys/unix/zerrors_linux_arm.go

@@ -71,6 +71,8 @@ const (
 	EXTPROC                          = 0x10000
 	FF1                              = 0x8000
 	FFDLY                            = 0x8000
+	FICLONE                          = 0x40049409
+	FICLONERANGE                     = 0x4020940d
 	FLUSHO                           = 0x1000
 	FS_IOC_ENABLE_VERITY             = 0x40806685
 	FS_IOC_GETFLAGS                  = 0x80046601

vendor/golang.org/x/sys/unix/zerrors_linux_arm64.go

@@ -73,6 +73,8 @@ const (
 	EXTRA_MAGIC                      = 0x45585401
 	FF1                              = 0x8000
 	FFDLY                            = 0x8000
+	FICLONE                          = 0x40049409
+	FICLONERANGE                     = 0x4020940d
 	FLUSHO                           = 0x1000
 	FPSIMD_MAGIC                     = 0x46508001
 	FS_IOC_ENABLE_VERITY             = 0x40806685

vendor/golang.org/x/sys/unix/zerrors_linux_mips.go

@@ -71,6 +71,8 @@ const (
 	EXTPROC                          = 0x10000
 	FF1                              = 0x8000
 	FFDLY                            = 0x8000
+	FICLONE                          = 0x80049409
+	FICLONERANGE                     = 0x8020940d
 	FLUSHO                           = 0x2000
 	FS_IOC_ENABLE_VERITY             = 0x80806685
 	FS_IOC_GETFLAGS                  = 0x40046601

vendor/golang.org/x/sys/unix/zerrors_linux_mips64.go

@@ -71,6 +71,8 @@ const (
 	EXTPROC                          = 0x10000
 	FF1                              = 0x8000
 	FFDLY                            = 0x8000
+	FICLONE                          = 0x80049409
+	FICLONERANGE                     = 0x8020940d
 	FLUSHO                           = 0x2000
 	FS_IOC_ENABLE_VERITY             = 0x80806685
 	FS_IOC_GETFLAGS                  = 0x40086601

vendor/golang.org/x/sys/unix/zerrors_linux_mips64le.go

@@ -71,6 +71,8 @@ const (
 	EXTPROC                          = 0x10000
 	FF1                              = 0x8000
 	FFDLY                            = 0x8000
+	FICLONE                          = 0x80049409
+	FICLONERANGE                     = 0x8020940d
 	FLUSHO                           = 0x2000
 	FS_IOC_ENABLE_VERITY             = 0x80806685
 	FS_IOC_GETFLAGS                  = 0x40086601

vendor/golang.org/x/sys/unix/zerrors_linux_mipsle.go

@@ -71,6 +71,8 @@ const (
 	EXTPROC                          = 0x10000
 	FF1                              = 0x8000
 	FFDLY                            = 0x8000
+	FICLONE                          = 0x80049409
+	FICLONERANGE                     = 0x8020940d
 	FLUSHO                           = 0x2000
 	FS_IOC_ENABLE_VERITY             = 0x80806685
 	FS_IOC_GETFLAGS                  = 0x40046601

vendor/golang.org/x/sys/unix/zerrors_linux_ppc64.go

@@ -71,6 +71,8 @@ const (
 	EXTPROC                          = 0x10000000
 	FF1                              = 0x4000
 	FFDLY                            = 0x4000
+	FICLONE                          = 0x80049409
+	FICLONERANGE                     = 0x8020940d
 	FLUSHO                           = 0x800000
 	FS_IOC_ENABLE_VERITY             = 0x80806685
 	FS_IOC_GETFLAGS                  = 0x40086601

vendor/golang.org/x/sys/unix/zerrors_linux_ppc64le.go

@@ -71,6 +71,8 @@ const (
 	EXTPROC                          = 0x10000000
 	FF1                              = 0x4000
 	FFDLY                            = 0x4000
+	FICLONE                          = 0x80049409
+	FICLONERANGE                     = 0x8020940d
 	FLUSHO                           = 0x800000
 	FS_IOC_ENABLE_VERITY             = 0x80806685
 	FS_IOC_GETFLAGS                  = 0x40086601

vendor/golang.org/x/sys/unix/zerrors_linux_riscv64.go

@@ -71,6 +71,8 @@ const (
 	EXTPROC                          = 0x10000
 	FF1                              = 0x8000
 	FFDLY                            = 0x8000
+	FICLONE                          = 0x40049409
+	FICLONERANGE                     = 0x4020940d
 	FLUSHO                           = 0x1000
 	FS_IOC_ENABLE_VERITY             = 0x40806685
 	FS_IOC_GETFLAGS                  = 0x80086601

vendor/golang.org/x/sys/unix/zerrors_linux_s390x.go

@@ -71,6 +71,8 @@ const (
 	EXTPROC                          = 0x10000
 	FF1                              = 0x8000
 	FFDLY                            = 0x8000
+	FICLONE                          = 0x40049409
+	FICLONERANGE                     = 0x4020940d
 	FLUSHO                           = 0x1000
 	FS_IOC_ENABLE_VERITY             = 0x40806685
 	FS_IOC_GETFLAGS                  = 0x80086601

vendor/golang.org/x/sys/unix/zerrors_linux_sparc64.go

@@ -75,6 +75,8 @@ const (
 	EXTPROC                          = 0x10000
 	FF1                              = 0x8000
 	FFDLY                            = 0x8000
+	FICLONE                          = 0x80049409
+	FICLONERANGE                     = 0x8020940d
 	FLUSHO                           = 0x1000
 	FS_IOC_ENABLE_VERITY             = 0x80806685
 	FS_IOC_GETFLAGS                  = 0x40086601

vendor/golang.org/x/sys/unix/zsyscall_illumos_amd64.go

@@ -13,7 +13,7 @@ import (
 //go:cgo_import_dynamic libc_preadv preadv "libc.so"
 //go:cgo_import_dynamic libc_writev writev "libc.so"
 //go:cgo_import_dynamic libc_pwritev pwritev "libc.so"
-//go:cgo_import_dynamic libc_accept4 accept4 "libc.so"
+//go:cgo_import_dynamic libc_accept4 accept4 "libsocket.so"
 //go:cgo_import_dynamic libc_pipe2 pipe2 "libc.so"
 
 //go:linkname procreadv libc_readv

vendor/golang.org/x/sys/unix/ztypes_linux.go

@@ -76,6 +76,21 @@ type Fsid struct {
 	Val [2]int32
 }
 
+type FileCloneRange struct {
+	Src_fd      int64
+	Src_offset  uint64
+	Src_length  uint64
+	Dest_offset uint64
+}
+
+type FileDedupeRange struct {
+	Src_offset uint64
+	Src_length uint64
+	Dest_count uint16
+	Reserved1  uint16
+	Reserved2  uint32
+}
+
 type FscryptPolicy struct {
 	Version                   uint8
 	Contents_encryption_mode  uint8

vendor/golang.org/x/tools/go/internal/gcimporter/gcimporter.go

@@ -491,7 +491,7 @@ func (p *parser) parseMapType(parent *types.Package) types.Type {
 //
 // For unqualified and anonymous names, the returned package is the parent
 // package unless parent == nil, in which case the returned package is the
-// package being imported. (The parent package is not nil if the the name
+// package being imported. (The parent package is not nil if the name
 // is an unqualified struct field or interface method name belonging to a
 // type declared in another package.)
 //

vendor/golang.org/x/tools/internal/imports/fix.go

@@ -827,7 +827,11 @@ func (e *ProcessEnv) goEnv() (map[string]string, error) {
 }
 
 func (e *ProcessEnv) matchFile(dir, name string) (bool, error) {
-	return build.Default.MatchFile(dir, name)
+	bctx, err := e.buildContext()
+	if err != nil {
+		return false, err
+	}
+	return bctx.MatchFile(dir, name)
 }
 
 // CopyConfig copies the env's configuration into a new env.
@@ -920,15 +924,21 @@ func (e *ProcessEnv) buildContext() (*build.Context, error) {
 	// Populate it only if present.
 	rc := reflect.ValueOf(&ctx).Elem()
 	dir := rc.FieldByName("Dir")
-	if !dir.IsValid() {
-		// Working drafts of Go 1.14 named the field "WorkingDir" instead.
-		// TODO(bcmills): Remove this case after the Go 1.14 beta has been released.
-		dir = rc.FieldByName("WorkingDir")
-	}
 	if dir.IsValid() && dir.Kind() == reflect.String {
 		dir.SetString(e.WorkingDir)
 	}
 
+	// Since Go 1.11, go/build.Context.Import may invoke 'go list' depending on
+	// the value in GO111MODULE in the process's environment. We always want to
+	// run in GOPATH mode when calling Import, so we need to prevent this from
+	// happening. In Go 1.16, GO111MODULE defaults to "on", so this problem comes
+	// up more frequently.
+	//
+	// HACK: setting any of the Context I/O hooks prevents Import from invoking
+	// 'go list', regardless of GO111MODULE. This is undocumented, but it's
+	// unlikely to change before GOPATH support is removed.
+	ctx.ReadDir = ioutil.ReadDir
+
 	return &ctx, nil
 }
 

vendor/modules.txt

@@ -19,7 +19,7 @@ github.com/VictoriaMetrics/metrics
 # github.com/VictoriaMetrics/metricsql v0.6.0
 github.com/VictoriaMetrics/metricsql
 github.com/VictoriaMetrics/metricsql/binaryop
-# github.com/aws/aws-sdk-go v1.34.25
+# github.com/aws/aws-sdk-go v1.34.28
 github.com/aws/aws-sdk-go/aws
 github.com/aws/aws-sdk-go/aws/arn
 github.com/aws/aws-sdk-go/aws/awserr
@@ -77,11 +77,11 @@ github.com/golang/protobuf/ptypes
 github.com/golang/protobuf/ptypes/any
 github.com/golang/protobuf/ptypes/duration
 github.com/golang/protobuf/ptypes/timestamp
-# github.com/golang/snappy v0.0.1
+# github.com/golang/snappy v0.0.2
 github.com/golang/snappy
 # github.com/googleapis/gax-go/v2 v2.0.5
 github.com/googleapis/gax-go/v2
-# github.com/jmespath/go-jmespath v0.3.0
+# github.com/jmespath/go-jmespath v0.4.0
 github.com/jmespath/go-jmespath
 # github.com/jstemmer/go-junit-report v0.9.1
 github.com/jstemmer/go-junit-report
@@ -149,7 +149,7 @@ golang.org/x/oauth2/google
 golang.org/x/oauth2/internal
 golang.org/x/oauth2/jws
 golang.org/x/oauth2/jwt
-# golang.org/x/sys v0.0.0-20200916084744-dbad9cb7cb7a
+# golang.org/x/sys v0.0.0-20200922070232-aee5d888a860
 golang.org/x/sys/internal/unsafeheader
 golang.org/x/sys/unix
 # golang.org/x/text v0.3.3
@@ -157,7 +157,7 @@ golang.org/x/text/secure/bidirule
 golang.org/x/text/transform
 golang.org/x/text/unicode/bidi
 golang.org/x/text/unicode/norm
-# golang.org/x/tools v0.0.0-20200916195026-c9a70fc28ce3
+# golang.org/x/tools v0.0.0-20200921210052-fa0125251cc4
 golang.org/x/tools/cmd/goimports
 golang.org/x/tools/go/ast/astutil
 golang.org/x/tools/go/gcexportdata
@@ -198,7 +198,7 @@ google.golang.org/appengine/internal/modules
 google.golang.org/appengine/internal/remote_api
 google.golang.org/appengine/internal/urlfetch
 google.golang.org/appengine/urlfetch
-# google.golang.org/genproto v0.0.0-20200916143405-f6a2fa72f0c4
+# google.golang.org/genproto v0.0.0-20200921165018-b9da36f5f452
 google.golang.org/genproto/googleapis/api/annotations
 google.golang.org/genproto/googleapis/iam/v1
 google.golang.org/genproto/googleapis/rpc/code