mirror of
https://github.com/VictoriaMetrics/VictoriaMetrics.git
synced 2024-11-21 14:44:00 +00:00
docs: update -help output after the commit 77be3e3a82
This commit is contained in:
Aliaksandr Valialkin
parent
77be3e3a82
commit
663a91bb82
12 changed files with 146 additions and 146 deletions
20
README.md
20
README.md
|
|
@ -1594,17 +1594,17 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
|
|||
-graphiteTrimTimestamp duration
|
||||
Trim timestamps for Graphite data to this duration. Minimum practical duration is 1s. Higher duration (i.e. 1m) may be used for reducing disk space usage for timestamp data (default 1s)
|
||||
-http.connTimeout duration
|
||||
Incoming http connections are closed after the configured timeout. This may help spreading incoming load among a cluster of services behind load balancer. Note that the real timeout may be bigger by up to 10% as a protection from Thundering herd problem (default 2m0s)
|
||||
Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
|
||||
-http.disableResponseCompression
|
||||
Disable compression of HTTP responses for saving CPU resources. By default compression is enabled to save network bandwidth
|
||||
Disable compression of HTTP responses to save CPU resources. By default compression is enabled to save network bandwidth
|
||||
-http.idleConnTimeout duration
|
||||
Timeout for incoming idle http connections (default 1m0s)
|
||||
-http.maxGracefulShutdownDuration duration
|
||||
The maximum duration for graceful shutdown of HTTP server. Highly loaded server may require increased value for graceful shutdown (default 7s)
|
||||
The maximum duration for a graceful shutdown of the HTTP server. A highly loaded server may require increased value for a graceful shutdown (default 7s)
|
||||
-http.pathPrefix string
|
||||
An optional prefix to add to all the paths handled by http server. For example, if '-http.pathPrefix=/foo/bar' is set, then all the http requests will be handled on '/foo/bar/*' paths. This may be useful for proxied requests. See https://www.robustperception.io/using-external-urls-and-proxies-with-prometheus
|
||||
-http.shutdownDelay duration
|
||||
Optional delay before http server shutdown. During this dealy the servier returns non-OK responses from /health page, so load balancers can route new requests to other servers
|
||||
Optional delay before http server shutdown. During this dealay, the servier returns non-OK responses from /health page, so load balancers can route new requests to other servers
|
||||
-httpAuth.password string
|
||||
Password for HTTP Basic Auth. The authentication is disabled if -httpAuth.username is empty
|
||||
-httpAuth.username string
|
||||
|
|
@ -1616,7 +1616,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
|
|||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 104857600)
|
||||
-influx.databaseNames array
|
||||
Comma-separated list of database names to return from /query and /influx/query API. This can be needed for accepting data from Telegraf plugins such as https://github.com/fangli/fluent-plugin-influxdb
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-influx.maxLineSize size
|
||||
The maximum size in bytes for a single Influx line during parsing
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 262144)
|
||||
|
|
@ -1637,7 +1637,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
|
|||
-loggerDisableTimestamps
|
||||
Whether to disable writing timestamps in logs
|
||||
-loggerErrorsPerSecondLimit int
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
|
||||
-loggerFormat string
|
||||
Format for logs. Possible values: default, json (default "default")
|
||||
-loggerLevel string
|
||||
|
|
@ -1647,7 +1647,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
|
|||
-loggerTimezone string
|
||||
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
|
||||
-loggerWarnsPerSecondLimit int
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
|
||||
-maxConcurrentInserts int
|
||||
The maximum number of concurrent inserts. Default value should work for most cases, since it minimizes the overhead for concurrent inserts. This option is tigthly coupled with -insert.maxQueueDuration (default 16)
|
||||
-maxInsertRequestSize size
|
||||
|
|
@ -1656,10 +1656,10 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
|
|||
-maxLabelsPerTimeseries int
|
||||
The maximum number of labels accepted per time series. Superfluous labels are dropped (default 30)
|
||||
-memory.allowedBytes size
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to non-zero value. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-memory.allowedPercent float
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage (default 60)
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||
-metricsAuthKey string
|
||||
Auth key for /metrics. It overrides httpAuth settings
|
||||
-opentsdbHTTPListenAddr string
|
||||
|
|
@ -1803,7 +1803,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
|
|||
-tls
|
||||
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
||||
-tlsCertFile string
|
||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs, since RSA certs are slow
|
||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower
|
||||
-tlsKeyFile string
|
||||
Path to file with TLS key. Used only if -tls is set
|
||||
-version
|
||||
|
|
|
|||
|
|
@ -505,17 +505,17 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
|
|||
-graphiteTrimTimestamp duration
|
||||
Trim timestamps for Graphite data to this duration. Minimum practical duration is 1s. Higher duration (i.e. 1m) may be used for reducing disk space usage for timestamp data (default 1s)
|
||||
-http.connTimeout duration
|
||||
Incoming http connections are closed after the configured timeout. This may help spreading incoming load among a cluster of services behind load balancer. Note that the real timeout may be bigger by up to 10% as a protection from Thundering herd problem (default 2m0s)
|
||||
Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
|
||||
-http.disableResponseCompression
|
||||
Disable compression of HTTP responses for saving CPU resources. By default compression is enabled to save network bandwidth
|
||||
Disable compression of HTTP responses to save CPU resources. By default compression is enabled to save network bandwidth
|
||||
-http.idleConnTimeout duration
|
||||
Timeout for incoming idle http connections (default 1m0s)
|
||||
-http.maxGracefulShutdownDuration duration
|
||||
The maximum duration for graceful shutdown of HTTP server. Highly loaded server may require increased value for graceful shutdown (default 7s)
|
||||
The maximum duration for a graceful shutdown of the HTTP server. A highly loaded server may require increased value for a graceful shutdown (default 7s)
|
||||
-http.pathPrefix string
|
||||
An optional prefix to add to all the paths handled by http server. For example, if '-http.pathPrefix=/foo/bar' is set, then all the http requests will be handled on '/foo/bar/*' paths. This may be useful for proxied requests. See https://www.robustperception.io/using-external-urls-and-proxies-with-prometheus
|
||||
-http.shutdownDelay duration
|
||||
Optional delay before http server shutdown. During this dealy the servier returns non-OK responses from /health page, so load balancers can route new requests to other servers
|
||||
Optional delay before http server shutdown. During this dealay, the servier returns non-OK responses from /health page, so load balancers can route new requests to other servers
|
||||
-httpAuth.password string
|
||||
Password for HTTP Basic Auth. The authentication is disabled if -httpAuth.username is empty
|
||||
-httpAuth.username string
|
||||
|
|
@ -527,7 +527,7 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
|
|||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 104857600)
|
||||
-influx.databaseNames array
|
||||
Comma-separated list of database names to return from /query and /influx/query API. This can be needed for accepting data from Telegraf plugins such as https://github.com/fangli/fluent-plugin-influxdb
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-influx.maxLineSize size
|
||||
The maximum size in bytes for a single Influx line during parsing
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 262144)
|
||||
|
|
@ -546,7 +546,7 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
|
|||
-loggerDisableTimestamps
|
||||
Whether to disable writing timestamps in logs
|
||||
-loggerErrorsPerSecondLimit int
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
|
||||
-loggerFormat string
|
||||
Format for logs. Possible values: default, json (default "default")
|
||||
-loggerLevel string
|
||||
|
|
@ -556,17 +556,17 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
|
|||
-loggerTimezone string
|
||||
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
|
||||
-loggerWarnsPerSecondLimit int
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
|
||||
-maxConcurrentInserts int
|
||||
The maximum number of concurrent inserts. Default value should work for most cases, since it minimizes the overhead for concurrent inserts. This option is tigthly coupled with -insert.maxQueueDuration (default 16)
|
||||
-maxInsertRequestSize size
|
||||
The maximum size in bytes of a single Prometheus remote_write API request
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 33554432)
|
||||
-memory.allowedBytes size
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to non-zero value. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-memory.allowedPercent float
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage (default 60)
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||
-metricsAuthKey string
|
||||
Auth key for /metrics. It overrides httpAuth settings
|
||||
-opentsdbHTTPListenAddr string
|
||||
|
|
@ -641,18 +641,18 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
|
|||
Whether to suppress scrape errors logging. The last error for each target is always available at '/targets' page even if scrape errors logging is suppressed
|
||||
-remoteWrite.basicAuth.password array
|
||||
Optional basic auth password to use for -remoteWrite.url. If multiple args are set, then they are applied independently for the corresponding -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.basicAuth.username array
|
||||
Optional basic auth username to use for -remoteWrite.url. If multiple args are set, then they are applied independently for the corresponding -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.bearerToken array
|
||||
Optional bearer auth token to use for -remoteWrite.url. If multiple args are set, then they are applied independently for the corresponding -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.flushInterval duration
|
||||
Interval for flushing the data to remote storage. This option takes effect only when less than 10K data points per second are pushed to -remoteWrite.url (default 1s)
|
||||
-remoteWrite.label array
|
||||
Optional label in the form 'name=value' to add to all the metrics before sending them to -remoteWrite.url. Pass multiple -remoteWrite.label flags in order to add multiple labels to metrics before sending them to remote storage
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.maxBlockSize size
|
||||
The maximum size in bytes of unpacked request to send to remote storage. It shouldn't exceed -maxInsertRequestSize from VictoriaMetrics
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 8388608)
|
||||
|
|
@ -661,7 +661,7 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
|
|||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-remoteWrite.proxyURL array
|
||||
Optional proxy URL for writing data to -remoteWrite.url. Supported proxies: http, https, socks5. Example: -remoteWrite.proxyURL=socks5://proxy:1234
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.queues int
|
||||
The number of concurrent queues to each -remoteWrite.url. Set more queues if default number of queues isn't enough for sending high volume of collected data to remote storage (default 4)
|
||||
-remoteWrite.rateLimit array
|
||||
|
|
@ -682,33 +682,33 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
|
|||
Supports array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.tlsCAFile array
|
||||
Optional path to TLS CA file to use for verifying connections to -remoteWrite.url. By default system CA is used. If multiple args are set, then they are applied independently for the corresponding -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.tlsCertFile array
|
||||
Optional path to client-side TLS certificate file to use when connecting to -remoteWrite.url. If multiple args are set, then they are applied independently for the corresponding -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.tlsInsecureSkipVerify array
|
||||
Whether to skip tls verification when connecting to -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.tlsKeyFile array
|
||||
Optional path to client-side TLS certificate key to use when connecting to -remoteWrite.url. If multiple args are set, then they are applied independently for the corresponding -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.tlsServerName array
|
||||
Optional TLS server name to use for connections to -remoteWrite.url. By default the server name from -remoteWrite.url is used. If multiple args are set, then they are applied independently for the corresponding -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.tmpDataPath string
|
||||
Path to directory where temporary data for remote write component is stored. See also -remoteWrite.maxDiskUsagePerURL (default "vmagent-remotewrite-data")
|
||||
-remoteWrite.url array
|
||||
Remote storage URL to write data to. It must support Prometheus remote_write API. It is recommended using VictoriaMetrics as remote storage. Example url: http://<victoriametrics-host>:8428/api/v1/write . Pass multiple -remoteWrite.url flags in order to write data concurrently to multiple remote storage systems
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.urlRelabelConfig array
|
||||
Optional path to relabel config for the corresponding -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-sortLabels
|
||||
Whether to sort labels for incoming samples before writing them to all the configured remote storage systems. This may be needed for reducing memory usage at remote storage when the order of labels in incoming samples is random. For example, if m{k1="v1",k2="v2"} may be sent as m{k2="v2",k1="v1"}Enabled sorting for labels can slow down ingestion performance a bit
|
||||
-tls
|
||||
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
||||
-tlsCertFile string
|
||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs, since RSA certs are slow
|
||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower
|
||||
-tlsKeyFile string
|
||||
Path to file with TLS key. Used only if -tls is set
|
||||
-version
|
||||
|
|
|
|||
|
|
@ -201,19 +201,19 @@ to set `-datasource.appendTypePrefix` flag to `true`, so vmalert can adjust URL
|
|||
The shortlist of configuration flags is the following:
|
||||
```
|
||||
-datasource.appendTypePrefix
|
||||
Whether to add type prefix to -datasource.url based on the query type. Set to true if sending different query types to VMSelect URL.
|
||||
Whether to add type prefix to -datasource.url based on the query type. Set to true if sending different query types to the VMSelect URL.
|
||||
-datasource.basicAuth.password string
|
||||
Optional basic auth password for -datasource.url
|
||||
-datasource.basicAuth.username string
|
||||
Optional basic auth username for -datasource.url
|
||||
-datasource.lookback duration
|
||||
Lookback defines how far to look into past when evaluating queries. For example, if datasource.lookback=5m then param "time" with value now()-5m will be added to every query.
|
||||
Lookback defines how far into the past to look when evaluating queries. For example, if the datasource.lookback=5m then param "time" with value now()-5m will be added to every query.
|
||||
-datasource.maxIdleConnections int
|
||||
Defines the number of idle (keep-alive connections) to configured datasource.Consider to set this value equal to the value: groups_total * group.concurrency. Too low value may result into high number of sockets in TIME_WAIT state. (default 100)
|
||||
Defines the number of idle (keep-alive connections) to each configured datasource. Consider setting this value equal to the value: groups_total * group.concurrency. Too low a value may result in a high number of sockets in TIME_WAIT state. (default 100)
|
||||
-datasource.queryStep duration
|
||||
queryStep defines how far a value can fallback to when evaluating queries. For example, if datasource.queryStep=15s then param "step" with value "15s" will be added to every query.
|
||||
-datasource.tlsCAFile string
|
||||
Optional path to TLS CA file to use for verifying connections to -datasource.url. By default system CA is used
|
||||
Optional path to TLS CA file to use for verifying connections to -datasource.url. By default, system CA is used
|
||||
-datasource.tlsCertFile string
|
||||
Optional path to client-side TLS certificate file to use when connecting to -datasource.url
|
||||
-datasource.tlsInsecureSkipVerify
|
||||
|
|
@ -221,13 +221,13 @@ The shortlist of configuration flags is the following:
|
|||
-datasource.tlsKeyFile string
|
||||
Optional path to client-side TLS certificate key to use when connecting to -datasource.url
|
||||
-datasource.tlsServerName string
|
||||
Optional TLS server name to use for connections to -datasource.url. By default the server name from -datasource.url is used
|
||||
Optional TLS server name to use for connections to -datasource.url. By default, the server name from -datasource.url is used
|
||||
-datasource.url string
|
||||
Victoria Metrics or VMSelect url. Required parameter. E.g. http://127.0.0.1:8428
|
||||
-dryRun -rule
|
||||
Whether to check only config files without running vmalert. The rules file are validated. The -rule flag must be specified.
|
||||
-enableTCP6
|
||||
Whether to enable IPv6 for listening and dialing. By default only IPv4 TCP is used
|
||||
Whether to enable IPv6 for listening and dialing. By default only IPv4 TCP and UDP is used
|
||||
-envflag.enable
|
||||
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set
|
||||
-envflag.prefix string
|
||||
|
|
@ -239,23 +239,23 @@ The shortlist of configuration flags is the following:
|
|||
eg. 'explore?orgId=1&left=[\"now-1h\",\"now\",\"VictoriaMetrics\",{\"expr\": \"{{$expr|quotesEscape|crlfEscape|queryEscape}}\"},{\"mode\":\"Metrics\"},{\"ui\":[true,true,true,\"none\"]}]'.If empty '/api/v1/:groupID/alertID/status' is used
|
||||
-external.label array
|
||||
Optional label in the form 'name=value' to add to all generated recording rules and alerts. Pass multiple -label flags in order to add multiple label sets.
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-external.url string
|
||||
External URL is used as alert's source for sent alerts to the notifier
|
||||
-fs.disableMmap
|
||||
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
||||
-http.connTimeout duration
|
||||
Incoming http connections are closed after the configured timeout. This may help spreading incoming load among a cluster of services behind load balancer. Note that the real timeout may be bigger by up to 10% as a protection from Thundering herd problem (default 2m0s)
|
||||
Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
|
||||
-http.disableResponseCompression
|
||||
Disable compression of HTTP responses for saving CPU resources. By default compression is enabled to save network bandwidth
|
||||
Disable compression of HTTP responses to save CPU resources. By default compression is enabled to save network bandwidth
|
||||
-http.idleConnTimeout duration
|
||||
Timeout for incoming idle http connections (default 1m0s)
|
||||
-http.maxGracefulShutdownDuration duration
|
||||
The maximum duration for graceful shutdown of HTTP server. Highly loaded server may require increased value for graceful shutdown (default 7s)
|
||||
The maximum duration for a graceful shutdown of the HTTP server. A highly loaded server may require increased value for a graceful shutdown (default 7s)
|
||||
-http.pathPrefix string
|
||||
An optional prefix to add to all the paths handled by http server. For example, if '-http.pathPrefix=/foo/bar' is set, then all the http requests will be handled on '/foo/bar/*' paths. This may be useful for proxied requests. See https://www.robustperception.io/using-external-urls-and-proxies-with-prometheus
|
||||
-http.shutdownDelay duration
|
||||
Optional delay before http server shutdown. During this dealy the servier returns non-OK responses from /health page, so load balancers can route new requests to other servers
|
||||
Optional delay before http server shutdown. During this dealay, the servier returns non-OK responses from /health page, so load balancers can route new requests to other servers
|
||||
-httpAuth.password string
|
||||
Password for HTTP Basic Auth. The authentication is disabled if -httpAuth.username is empty
|
||||
-httpAuth.username string
|
||||
|
|
@ -265,7 +265,7 @@ The shortlist of configuration flags is the following:
|
|||
-loggerDisableTimestamps
|
||||
Whether to disable writing timestamps in logs
|
||||
-loggerErrorsPerSecondLimit int
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
|
||||
-loggerFormat string
|
||||
Format for logs. Possible values: default, json (default "default")
|
||||
-loggerLevel string
|
||||
|
|
@ -275,38 +275,38 @@ The shortlist of configuration flags is the following:
|
|||
-loggerTimezone string
|
||||
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
|
||||
-loggerWarnsPerSecondLimit int
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
|
||||
-memory.allowedBytes size
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to non-zero value. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-memory.allowedPercent float
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage (default 60)
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||
-metricsAuthKey string
|
||||
Auth key for /metrics. It overrides httpAuth settings
|
||||
-notifier.basicAuth.password array
|
||||
Optional basic auth password for -notifier.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-notifier.basicAuth.username array
|
||||
Optional basic auth username for -notifier.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-notifier.tlsCAFile array
|
||||
Optional path to TLS CA file to use for verifying connections to -notifier.url. By default system CA is used
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-notifier.tlsCertFile array
|
||||
Optional path to client-side TLS certificate file to use when connecting to -notifier.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-notifier.tlsInsecureSkipVerify array
|
||||
Whether to skip tls verification when connecting to -notifier.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
-notifier.tlsKeyFile array
|
||||
Optional path to client-side TLS certificate key to use when connecting to -notifier.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-notifier.tlsServerName array
|
||||
Optional TLS server name to use for connections to -notifier.url. By default the server name from -notifier.url is used
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-notifier.url array
|
||||
Prometheus alertmanager URL. Required parameter. e.g. http://127.0.0.1:9093
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-pprofAuthKey string
|
||||
Auth key for /debug/pprof. It overrides httpAuth settings
|
||||
-remoteRead.basicAuth.password string
|
||||
|
|
@ -359,7 +359,7 @@ The shortlist of configuration flags is the following:
|
|||
-rule="dir/*.yaml" -rule="/*.yaml". Relative path to all .yaml files in "dir" folder,
|
||||
absolute path to all .yaml files in root.
|
||||
Rule files may contain %{ENV_VAR} placeholders, which are substituted by the corresponding env vars.
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-rule.validateExpressions
|
||||
Whether to validate rules expressions via MetricsQL engine (default true)
|
||||
-rule.validateTemplates
|
||||
|
|
@ -367,7 +367,7 @@ The shortlist of configuration flags is the following:
|
|||
-tls
|
||||
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
||||
-tlsCertFile string
|
||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs, since RSA certs are slow
|
||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower
|
||||
-tlsKeyFile string
|
||||
Path to file with TLS key. Used only if -tls is set
|
||||
-version
|
||||
|
|
|
|||
|
|
@ -174,7 +174,7 @@ See the docs at https://victoriametrics.github.io/vmauth.html .
|
|||
-auth.config string
|
||||
Path to auth config. See https://victoriametrics.github.io/vmauth.html for details on the format of this auth config
|
||||
-enableTCP6
|
||||
Whether to enable IPv6 for listening and dialing. By default only IPv4 TCP is used
|
||||
Whether to enable IPv6 for listening and dialing. By default only IPv4 TCP and UDP is used
|
||||
-envflag.enable
|
||||
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set
|
||||
-envflag.prefix string
|
||||
|
|
@ -182,17 +182,17 @@ See the docs at https://victoriametrics.github.io/vmauth.html .
|
|||
-fs.disableMmap
|
||||
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
||||
-http.connTimeout duration
|
||||
Incoming http connections are closed after the configured timeout. This may help spreading incoming load among a cluster of services behind load balancer. Note that the real timeout may be bigger by up to 10% as a protection from Thundering herd problem (default 2m0s)
|
||||
Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
|
||||
-http.disableResponseCompression
|
||||
Disable compression of HTTP responses for saving CPU resources. By default compression is enabled to save network bandwidth
|
||||
Disable compression of HTTP responses to save CPU resources. By default compression is enabled to save network bandwidth
|
||||
-http.idleConnTimeout duration
|
||||
Timeout for incoming idle http connections (default 1m0s)
|
||||
-http.maxGracefulShutdownDuration duration
|
||||
The maximum duration for graceful shutdown of HTTP server. Highly loaded server may require increased value for graceful shutdown (default 7s)
|
||||
The maximum duration for a graceful shutdown of the HTTP server. A highly loaded server may require increased value for a graceful shutdown (default 7s)
|
||||
-http.pathPrefix string
|
||||
An optional prefix to add to all the paths handled by http server. For example, if '-http.pathPrefix=/foo/bar' is set, then all the http requests will be handled on '/foo/bar/*' paths. This may be useful for proxied requests. See https://www.robustperception.io/using-external-urls-and-proxies-with-prometheus
|
||||
-http.shutdownDelay duration
|
||||
Optional delay before http server shutdown. During this dealy the servier returns non-OK responses from /health page, so load balancers can route new requests to other servers
|
||||
Optional delay before http server shutdown. During this dealay, the servier returns non-OK responses from /health page, so load balancers can route new requests to other servers
|
||||
-httpAuth.password string
|
||||
Password for HTTP Basic Auth. The authentication is disabled if -httpAuth.username is empty
|
||||
-httpAuth.username string
|
||||
|
|
@ -202,7 +202,7 @@ See the docs at https://victoriametrics.github.io/vmauth.html .
|
|||
-loggerDisableTimestamps
|
||||
Whether to disable writing timestamps in logs
|
||||
-loggerErrorsPerSecondLimit int
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
|
||||
-loggerFormat string
|
||||
Format for logs. Possible values: default, json (default "default")
|
||||
-loggerLevel string
|
||||
|
|
@ -212,12 +212,12 @@ See the docs at https://victoriametrics.github.io/vmauth.html .
|
|||
-loggerTimezone string
|
||||
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
|
||||
-loggerWarnsPerSecondLimit int
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
|
||||
-memory.allowedBytes size
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to non-zero value. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-memory.allowedPercent float
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage (default 60)
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||
-metricsAuthKey string
|
||||
Auth key for /metrics. It overrides httpAuth settings
|
||||
-pprofAuthKey string
|
||||
|
|
@ -225,7 +225,7 @@ See the docs at https://victoriametrics.github.io/vmauth.html .
|
|||
-tls
|
||||
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
||||
-tlsCertFile string
|
||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs, since RSA certs are slow
|
||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower
|
||||
-tlsKeyFile string
|
||||
Path to file with TLS key. Used only if -tls is set
|
||||
-version
|
||||
|
|
|
|||
|
|
@ -194,7 +194,7 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
|
|||
-loggerDisableTimestamps
|
||||
Whether to disable writing timestamps in logs
|
||||
-loggerErrorsPerSecondLimit int
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
|
||||
-loggerFormat string
|
||||
Format for logs. Possible values: default, json (default "default")
|
||||
-loggerLevel string
|
||||
|
|
@ -204,15 +204,15 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
|
|||
-loggerTimezone string
|
||||
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
|
||||
-loggerWarnsPerSecondLimit int
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
|
||||
-maxBytesPerSecond size
|
||||
The maximum upload speed. There is no limit if it is set to 0
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-memory.allowedBytes size
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to non-zero value. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-memory.allowedPercent float
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage (default 60)
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||
-origin string
|
||||
Optional origin directory on the remote storage with old backup for server-side copying when performing full backup. This speeds up full backups
|
||||
-snapshot.createURL string
|
||||
|
|
|
|||
|
|
@ -94,7 +94,7 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
|
|||
-loggerDisableTimestamps
|
||||
Whether to disable writing timestamps in logs
|
||||
-loggerErrorsPerSecondLimit int
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
|
||||
-loggerFormat string
|
||||
Format for logs. Possible values: default, json (default "default")
|
||||
-loggerLevel string
|
||||
|
|
@ -104,15 +104,15 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
|
|||
-loggerTimezone string
|
||||
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
|
||||
-loggerWarnsPerSecondLimit int
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
|
||||
-maxBytesPerSecond size
|
||||
The maximum download speed. There is no limit if it is set to 0
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-memory.allowedBytes size
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to non-zero value. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-memory.allowedPercent float
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage (default 60)
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||
-skipBackupCompleteCheck
|
||||
Whether to skip checking for 'backup complete' file in -src. This may be useful for restoring from old backups, which were created without 'backup complete' file
|
||||
-src string
|
||||
|
|
|
|||
|
|
@ -1598,17 +1598,17 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
|
|||
-graphiteTrimTimestamp duration
|
||||
Trim timestamps for Graphite data to this duration. Minimum practical duration is 1s. Higher duration (i.e. 1m) may be used for reducing disk space usage for timestamp data (default 1s)
|
||||
-http.connTimeout duration
|
||||
Incoming http connections are closed after the configured timeout. This may help spreading incoming load among a cluster of services behind load balancer. Note that the real timeout may be bigger by up to 10% as a protection from Thundering herd problem (default 2m0s)
|
||||
Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
|
||||
-http.disableResponseCompression
|
||||
Disable compression of HTTP responses for saving CPU resources. By default compression is enabled to save network bandwidth
|
||||
Disable compression of HTTP responses to save CPU resources. By default compression is enabled to save network bandwidth
|
||||
-http.idleConnTimeout duration
|
||||
Timeout for incoming idle http connections (default 1m0s)
|
||||
-http.maxGracefulShutdownDuration duration
|
||||
The maximum duration for graceful shutdown of HTTP server. Highly loaded server may require increased value for graceful shutdown (default 7s)
|
||||
The maximum duration for a graceful shutdown of the HTTP server. A highly loaded server may require increased value for a graceful shutdown (default 7s)
|
||||
-http.pathPrefix string
|
||||
An optional prefix to add to all the paths handled by http server. For example, if '-http.pathPrefix=/foo/bar' is set, then all the http requests will be handled on '/foo/bar/*' paths. This may be useful for proxied requests. See https://www.robustperception.io/using-external-urls-and-proxies-with-prometheus
|
||||
-http.shutdownDelay duration
|
||||
Optional delay before http server shutdown. During this dealy the servier returns non-OK responses from /health page, so load balancers can route new requests to other servers
|
||||
Optional delay before http server shutdown. During this dealay, the servier returns non-OK responses from /health page, so load balancers can route new requests to other servers
|
||||
-httpAuth.password string
|
||||
Password for HTTP Basic Auth. The authentication is disabled if -httpAuth.username is empty
|
||||
-httpAuth.username string
|
||||
|
|
@ -1620,7 +1620,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
|
|||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 104857600)
|
||||
-influx.databaseNames array
|
||||
Comma-separated list of database names to return from /query and /influx/query API. This can be needed for accepting data from Telegraf plugins such as https://github.com/fangli/fluent-plugin-influxdb
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-influx.maxLineSize size
|
||||
The maximum size in bytes for a single Influx line during parsing
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 262144)
|
||||
|
|
@ -1641,7 +1641,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
|
|||
-loggerDisableTimestamps
|
||||
Whether to disable writing timestamps in logs
|
||||
-loggerErrorsPerSecondLimit int
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
|
||||
-loggerFormat string
|
||||
Format for logs. Possible values: default, json (default "default")
|
||||
-loggerLevel string
|
||||
|
|
@ -1651,7 +1651,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
|
|||
-loggerTimezone string
|
||||
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
|
||||
-loggerWarnsPerSecondLimit int
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
|
||||
-maxConcurrentInserts int
|
||||
The maximum number of concurrent inserts. Default value should work for most cases, since it minimizes the overhead for concurrent inserts. This option is tigthly coupled with -insert.maxQueueDuration (default 16)
|
||||
-maxInsertRequestSize size
|
||||
|
|
@ -1660,10 +1660,10 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
|
|||
-maxLabelsPerTimeseries int
|
||||
The maximum number of labels accepted per time series. Superfluous labels are dropped (default 30)
|
||||
-memory.allowedBytes size
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to non-zero value. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-memory.allowedPercent float
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage (default 60)
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||
-metricsAuthKey string
|
||||
Auth key for /metrics. It overrides httpAuth settings
|
||||
-opentsdbHTTPListenAddr string
|
||||
|
|
@ -1807,7 +1807,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
|
|||
-tls
|
||||
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
||||
-tlsCertFile string
|
||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs, since RSA certs are slow
|
||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower
|
||||
-tlsKeyFile string
|
||||
Path to file with TLS key. Used only if -tls is set
|
||||
-version
|
||||
|
|
|
|||
|
|
@ -509,17 +509,17 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
|
|||
-graphiteTrimTimestamp duration
|
||||
Trim timestamps for Graphite data to this duration. Minimum practical duration is 1s. Higher duration (i.e. 1m) may be used for reducing disk space usage for timestamp data (default 1s)
|
||||
-http.connTimeout duration
|
||||
Incoming http connections are closed after the configured timeout. This may help spreading incoming load among a cluster of services behind load balancer. Note that the real timeout may be bigger by up to 10% as a protection from Thundering herd problem (default 2m0s)
|
||||
Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
|
||||
-http.disableResponseCompression
|
||||
Disable compression of HTTP responses for saving CPU resources. By default compression is enabled to save network bandwidth
|
||||
Disable compression of HTTP responses to save CPU resources. By default compression is enabled to save network bandwidth
|
||||
-http.idleConnTimeout duration
|
||||
Timeout for incoming idle http connections (default 1m0s)
|
||||
-http.maxGracefulShutdownDuration duration
|
||||
The maximum duration for graceful shutdown of HTTP server. Highly loaded server may require increased value for graceful shutdown (default 7s)
|
||||
The maximum duration for a graceful shutdown of the HTTP server. A highly loaded server may require increased value for a graceful shutdown (default 7s)
|
||||
-http.pathPrefix string
|
||||
An optional prefix to add to all the paths handled by http server. For example, if '-http.pathPrefix=/foo/bar' is set, then all the http requests will be handled on '/foo/bar/*' paths. This may be useful for proxied requests. See https://www.robustperception.io/using-external-urls-and-proxies-with-prometheus
|
||||
-http.shutdownDelay duration
|
||||
Optional delay before http server shutdown. During this dealy the servier returns non-OK responses from /health page, so load balancers can route new requests to other servers
|
||||
Optional delay before http server shutdown. During this dealay, the servier returns non-OK responses from /health page, so load balancers can route new requests to other servers
|
||||
-httpAuth.password string
|
||||
Password for HTTP Basic Auth. The authentication is disabled if -httpAuth.username is empty
|
||||
-httpAuth.username string
|
||||
|
|
@ -531,7 +531,7 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
|
|||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 104857600)
|
||||
-influx.databaseNames array
|
||||
Comma-separated list of database names to return from /query and /influx/query API. This can be needed for accepting data from Telegraf plugins such as https://github.com/fangli/fluent-plugin-influxdb
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-influx.maxLineSize size
|
||||
The maximum size in bytes for a single Influx line during parsing
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 262144)
|
||||
|
|
@ -550,7 +550,7 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
|
|||
-loggerDisableTimestamps
|
||||
Whether to disable writing timestamps in logs
|
||||
-loggerErrorsPerSecondLimit int
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
|
||||
-loggerFormat string
|
||||
Format for logs. Possible values: default, json (default "default")
|
||||
-loggerLevel string
|
||||
|
|
@ -560,17 +560,17 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
|
|||
-loggerTimezone string
|
||||
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
|
||||
-loggerWarnsPerSecondLimit int
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
|
||||
-maxConcurrentInserts int
|
||||
The maximum number of concurrent inserts. Default value should work for most cases, since it minimizes the overhead for concurrent inserts. This option is tigthly coupled with -insert.maxQueueDuration (default 16)
|
||||
-maxInsertRequestSize size
|
||||
The maximum size in bytes of a single Prometheus remote_write API request
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 33554432)
|
||||
-memory.allowedBytes size
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to non-zero value. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-memory.allowedPercent float
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage (default 60)
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||
-metricsAuthKey string
|
||||
Auth key for /metrics. It overrides httpAuth settings
|
||||
-opentsdbHTTPListenAddr string
|
||||
|
|
@ -645,18 +645,18 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
|
|||
Whether to suppress scrape errors logging. The last error for each target is always available at '/targets' page even if scrape errors logging is suppressed
|
||||
-remoteWrite.basicAuth.password array
|
||||
Optional basic auth password to use for -remoteWrite.url. If multiple args are set, then they are applied independently for the corresponding -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.basicAuth.username array
|
||||
Optional basic auth username to use for -remoteWrite.url. If multiple args are set, then they are applied independently for the corresponding -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.bearerToken array
|
||||
Optional bearer auth token to use for -remoteWrite.url. If multiple args are set, then they are applied independently for the corresponding -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.flushInterval duration
|
||||
Interval for flushing the data to remote storage. This option takes effect only when less than 10K data points per second are pushed to -remoteWrite.url (default 1s)
|
||||
-remoteWrite.label array
|
||||
Optional label in the form 'name=value' to add to all the metrics before sending them to -remoteWrite.url. Pass multiple -remoteWrite.label flags in order to add multiple labels to metrics before sending them to remote storage
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.maxBlockSize size
|
||||
The maximum size in bytes of unpacked request to send to remote storage. It shouldn't exceed -maxInsertRequestSize from VictoriaMetrics
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 8388608)
|
||||
|
|
@ -665,7 +665,7 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
|
|||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-remoteWrite.proxyURL array
|
||||
Optional proxy URL for writing data to -remoteWrite.url. Supported proxies: http, https, socks5. Example: -remoteWrite.proxyURL=socks5://proxy:1234
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.queues int
|
||||
The number of concurrent queues to each -remoteWrite.url. Set more queues if default number of queues isn't enough for sending high volume of collected data to remote storage (default 4)
|
||||
-remoteWrite.rateLimit array
|
||||
|
|
@ -686,33 +686,33 @@ See the docs at https://victoriametrics.github.io/vmagent.html .
|
|||
Supports array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.tlsCAFile array
|
||||
Optional path to TLS CA file to use for verifying connections to -remoteWrite.url. By default system CA is used. If multiple args are set, then they are applied independently for the corresponding -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.tlsCertFile array
|
||||
Optional path to client-side TLS certificate file to use when connecting to -remoteWrite.url. If multiple args are set, then they are applied independently for the corresponding -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.tlsInsecureSkipVerify array
|
||||
Whether to skip tls verification when connecting to -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.tlsKeyFile array
|
||||
Optional path to client-side TLS certificate key to use when connecting to -remoteWrite.url. If multiple args are set, then they are applied independently for the corresponding -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.tlsServerName array
|
||||
Optional TLS server name to use for connections to -remoteWrite.url. By default the server name from -remoteWrite.url is used. If multiple args are set, then they are applied independently for the corresponding -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.tmpDataPath string
|
||||
Path to directory where temporary data for remote write component is stored. See also -remoteWrite.maxDiskUsagePerURL (default "vmagent-remotewrite-data")
|
||||
-remoteWrite.url array
|
||||
Remote storage URL to write data to. It must support Prometheus remote_write API. It is recommended using VictoriaMetrics as remote storage. Example url: http://<victoriametrics-host>:8428/api/v1/write . Pass multiple -remoteWrite.url flags in order to write data concurrently to multiple remote storage systems
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-remoteWrite.urlRelabelConfig array
|
||||
Optional path to relabel config for the corresponding -remoteWrite.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-sortLabels
|
||||
Whether to sort labels for incoming samples before writing them to all the configured remote storage systems. This may be needed for reducing memory usage at remote storage when the order of labels in incoming samples is random. For example, if m{k1="v1",k2="v2"} may be sent as m{k2="v2",k1="v1"}Enabled sorting for labels can slow down ingestion performance a bit
|
||||
-tls
|
||||
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
||||
-tlsCertFile string
|
||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs, since RSA certs are slow
|
||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower
|
||||
-tlsKeyFile string
|
||||
Path to file with TLS key. Used only if -tls is set
|
||||
-version
|
||||
|
|
|
|||
|
|
@ -205,19 +205,19 @@ to set `-datasource.appendTypePrefix` flag to `true`, so vmalert can adjust URL
|
|||
The shortlist of configuration flags is the following:
|
||||
```
|
||||
-datasource.appendTypePrefix
|
||||
Whether to add type prefix to -datasource.url based on the query type. Set to true if sending different query types to VMSelect URL.
|
||||
Whether to add type prefix to -datasource.url based on the query type. Set to true if sending different query types to the VMSelect URL.
|
||||
-datasource.basicAuth.password string
|
||||
Optional basic auth password for -datasource.url
|
||||
-datasource.basicAuth.username string
|
||||
Optional basic auth username for -datasource.url
|
||||
-datasource.lookback duration
|
||||
Lookback defines how far to look into past when evaluating queries. For example, if datasource.lookback=5m then param "time" with value now()-5m will be added to every query.
|
||||
Lookback defines how far into the past to look when evaluating queries. For example, if the datasource.lookback=5m then param "time" with value now()-5m will be added to every query.
|
||||
-datasource.maxIdleConnections int
|
||||
Defines the number of idle (keep-alive connections) to configured datasource.Consider to set this value equal to the value: groups_total * group.concurrency. Too low value may result into high number of sockets in TIME_WAIT state. (default 100)
|
||||
Defines the number of idle (keep-alive connections) to each configured datasource. Consider setting this value equal to the value: groups_total * group.concurrency. Too low a value may result in a high number of sockets in TIME_WAIT state. (default 100)
|
||||
-datasource.queryStep duration
|
||||
queryStep defines how far a value can fallback to when evaluating queries. For example, if datasource.queryStep=15s then param "step" with value "15s" will be added to every query.
|
||||
-datasource.tlsCAFile string
|
||||
Optional path to TLS CA file to use for verifying connections to -datasource.url. By default system CA is used
|
||||
Optional path to TLS CA file to use for verifying connections to -datasource.url. By default, system CA is used
|
||||
-datasource.tlsCertFile string
|
||||
Optional path to client-side TLS certificate file to use when connecting to -datasource.url
|
||||
-datasource.tlsInsecureSkipVerify
|
||||
|
|
@ -225,13 +225,13 @@ The shortlist of configuration flags is the following:
|
|||
-datasource.tlsKeyFile string
|
||||
Optional path to client-side TLS certificate key to use when connecting to -datasource.url
|
||||
-datasource.tlsServerName string
|
||||
Optional TLS server name to use for connections to -datasource.url. By default the server name from -datasource.url is used
|
||||
Optional TLS server name to use for connections to -datasource.url. By default, the server name from -datasource.url is used
|
||||
-datasource.url string
|
||||
Victoria Metrics or VMSelect url. Required parameter. E.g. http://127.0.0.1:8428
|
||||
-dryRun -rule
|
||||
Whether to check only config files without running vmalert. The rules file are validated. The -rule flag must be specified.
|
||||
-enableTCP6
|
||||
Whether to enable IPv6 for listening and dialing. By default only IPv4 TCP is used
|
||||
Whether to enable IPv6 for listening and dialing. By default only IPv4 TCP and UDP is used
|
||||
-envflag.enable
|
||||
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set
|
||||
-envflag.prefix string
|
||||
|
|
@ -243,23 +243,23 @@ The shortlist of configuration flags is the following:
|
|||
eg. 'explore?orgId=1&left=[\"now-1h\",\"now\",\"VictoriaMetrics\",{\"expr\": \"{{$expr|quotesEscape|crlfEscape|queryEscape}}\"},{\"mode\":\"Metrics\"},{\"ui\":[true,true,true,\"none\"]}]'.If empty '/api/v1/:groupID/alertID/status' is used
|
||||
-external.label array
|
||||
Optional label in the form 'name=value' to add to all generated recording rules and alerts. Pass multiple -label flags in order to add multiple label sets.
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-external.url string
|
||||
External URL is used as alert's source for sent alerts to the notifier
|
||||
-fs.disableMmap
|
||||
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
||||
-http.connTimeout duration
|
||||
Incoming http connections are closed after the configured timeout. This may help spreading incoming load among a cluster of services behind load balancer. Note that the real timeout may be bigger by up to 10% as a protection from Thundering herd problem (default 2m0s)
|
||||
Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
|
||||
-http.disableResponseCompression
|
||||
Disable compression of HTTP responses for saving CPU resources. By default compression is enabled to save network bandwidth
|
||||
Disable compression of HTTP responses to save CPU resources. By default compression is enabled to save network bandwidth
|
||||
-http.idleConnTimeout duration
|
||||
Timeout for incoming idle http connections (default 1m0s)
|
||||
-http.maxGracefulShutdownDuration duration
|
||||
The maximum duration for graceful shutdown of HTTP server. Highly loaded server may require increased value for graceful shutdown (default 7s)
|
||||
The maximum duration for a graceful shutdown of the HTTP server. A highly loaded server may require increased value for a graceful shutdown (default 7s)
|
||||
-http.pathPrefix string
|
||||
An optional prefix to add to all the paths handled by http server. For example, if '-http.pathPrefix=/foo/bar' is set, then all the http requests will be handled on '/foo/bar/*' paths. This may be useful for proxied requests. See https://www.robustperception.io/using-external-urls-and-proxies-with-prometheus
|
||||
-http.shutdownDelay duration
|
||||
Optional delay before http server shutdown. During this dealy the servier returns non-OK responses from /health page, so load balancers can route new requests to other servers
|
||||
Optional delay before http server shutdown. During this dealay, the servier returns non-OK responses from /health page, so load balancers can route new requests to other servers
|
||||
-httpAuth.password string
|
||||
Password for HTTP Basic Auth. The authentication is disabled if -httpAuth.username is empty
|
||||
-httpAuth.username string
|
||||
|
|
@ -269,7 +269,7 @@ The shortlist of configuration flags is the following:
|
|||
-loggerDisableTimestamps
|
||||
Whether to disable writing timestamps in logs
|
||||
-loggerErrorsPerSecondLimit int
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
|
||||
-loggerFormat string
|
||||
Format for logs. Possible values: default, json (default "default")
|
||||
-loggerLevel string
|
||||
|
|
@ -279,38 +279,38 @@ The shortlist of configuration flags is the following:
|
|||
-loggerTimezone string
|
||||
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
|
||||
-loggerWarnsPerSecondLimit int
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
|
||||
-memory.allowedBytes size
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to non-zero value. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-memory.allowedPercent float
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage (default 60)
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||
-metricsAuthKey string
|
||||
Auth key for /metrics. It overrides httpAuth settings
|
||||
-notifier.basicAuth.password array
|
||||
Optional basic auth password for -notifier.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-notifier.basicAuth.username array
|
||||
Optional basic auth username for -notifier.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-notifier.tlsCAFile array
|
||||
Optional path to TLS CA file to use for verifying connections to -notifier.url. By default system CA is used
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-notifier.tlsCertFile array
|
||||
Optional path to client-side TLS certificate file to use when connecting to -notifier.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-notifier.tlsInsecureSkipVerify array
|
||||
Whether to skip tls verification when connecting to -notifier.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
-notifier.tlsKeyFile array
|
||||
Optional path to client-side TLS certificate key to use when connecting to -notifier.url
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-notifier.tlsServerName array
|
||||
Optional TLS server name to use for connections to -notifier.url. By default the server name from -notifier.url is used
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-notifier.url array
|
||||
Prometheus alertmanager URL. Required parameter. e.g. http://127.0.0.1:9093
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-pprofAuthKey string
|
||||
Auth key for /debug/pprof. It overrides httpAuth settings
|
||||
-remoteRead.basicAuth.password string
|
||||
|
|
@ -363,7 +363,7 @@ The shortlist of configuration flags is the following:
|
|||
-rule="dir/*.yaml" -rule="/*.yaml". Relative path to all .yaml files in "dir" folder,
|
||||
absolute path to all .yaml files in root.
|
||||
Rule files may contain %{ENV_VAR} placeholders, which are substituted by the corresponding env vars.
|
||||
Supports array of values separated by comma or specified via multiple flags.
|
||||
Supports an array of values separated by comma or specified via multiple flags.
|
||||
-rule.validateExpressions
|
||||
Whether to validate rules expressions via MetricsQL engine (default true)
|
||||
-rule.validateTemplates
|
||||
|
|
@ -371,7 +371,7 @@ The shortlist of configuration flags is the following:
|
|||
-tls
|
||||
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
||||
-tlsCertFile string
|
||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs, since RSA certs are slow
|
||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower
|
||||
-tlsKeyFile string
|
||||
Path to file with TLS key. Used only if -tls is set
|
||||
-version
|
||||
|
|
|
|||
|
|
@ -178,7 +178,7 @@ See the docs at https://victoriametrics.github.io/vmauth.html .
|
|||
-auth.config string
|
||||
Path to auth config. See https://victoriametrics.github.io/vmauth.html for details on the format of this auth config
|
||||
-enableTCP6
|
||||
Whether to enable IPv6 for listening and dialing. By default only IPv4 TCP is used
|
||||
Whether to enable IPv6 for listening and dialing. By default only IPv4 TCP and UDP is used
|
||||
-envflag.enable
|
||||
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set
|
||||
-envflag.prefix string
|
||||
|
|
@ -186,17 +186,17 @@ See the docs at https://victoriametrics.github.io/vmauth.html .
|
|||
-fs.disableMmap
|
||||
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
||||
-http.connTimeout duration
|
||||
Incoming http connections are closed after the configured timeout. This may help spreading incoming load among a cluster of services behind load balancer. Note that the real timeout may be bigger by up to 10% as a protection from Thundering herd problem (default 2m0s)
|
||||
Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
|
||||
-http.disableResponseCompression
|
||||
Disable compression of HTTP responses for saving CPU resources. By default compression is enabled to save network bandwidth
|
||||
Disable compression of HTTP responses to save CPU resources. By default compression is enabled to save network bandwidth
|
||||
-http.idleConnTimeout duration
|
||||
Timeout for incoming idle http connections (default 1m0s)
|
||||
-http.maxGracefulShutdownDuration duration
|
||||
The maximum duration for graceful shutdown of HTTP server. Highly loaded server may require increased value for graceful shutdown (default 7s)
|
||||
The maximum duration for a graceful shutdown of the HTTP server. A highly loaded server may require increased value for a graceful shutdown (default 7s)
|
||||
-http.pathPrefix string
|
||||
An optional prefix to add to all the paths handled by http server. For example, if '-http.pathPrefix=/foo/bar' is set, then all the http requests will be handled on '/foo/bar/*' paths. This may be useful for proxied requests. See https://www.robustperception.io/using-external-urls-and-proxies-with-prometheus
|
||||
-http.shutdownDelay duration
|
||||
Optional delay before http server shutdown. During this dealy the servier returns non-OK responses from /health page, so load balancers can route new requests to other servers
|
||||
Optional delay before http server shutdown. During this dealay, the servier returns non-OK responses from /health page, so load balancers can route new requests to other servers
|
||||
-httpAuth.password string
|
||||
Password for HTTP Basic Auth. The authentication is disabled if -httpAuth.username is empty
|
||||
-httpAuth.username string
|
||||
|
|
@ -206,7 +206,7 @@ See the docs at https://victoriametrics.github.io/vmauth.html .
|
|||
-loggerDisableTimestamps
|
||||
Whether to disable writing timestamps in logs
|
||||
-loggerErrorsPerSecondLimit int
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
|
||||
-loggerFormat string
|
||||
Format for logs. Possible values: default, json (default "default")
|
||||
-loggerLevel string
|
||||
|
|
@ -216,12 +216,12 @@ See the docs at https://victoriametrics.github.io/vmauth.html .
|
|||
-loggerTimezone string
|
||||
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
|
||||
-loggerWarnsPerSecondLimit int
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
|
||||
-memory.allowedBytes size
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to non-zero value. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-memory.allowedPercent float
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage (default 60)
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||
-metricsAuthKey string
|
||||
Auth key for /metrics. It overrides httpAuth settings
|
||||
-pprofAuthKey string
|
||||
|
|
@ -229,7 +229,7 @@ See the docs at https://victoriametrics.github.io/vmauth.html .
|
|||
-tls
|
||||
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
||||
-tlsCertFile string
|
||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs, since RSA certs are slow
|
||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower
|
||||
-tlsKeyFile string
|
||||
Path to file with TLS key. Used only if -tls is set
|
||||
-version
|
||||
|
|
|
|||
|
|
@ -198,7 +198,7 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
|
|||
-loggerDisableTimestamps
|
||||
Whether to disable writing timestamps in logs
|
||||
-loggerErrorsPerSecondLimit int
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
|
||||
-loggerFormat string
|
||||
Format for logs. Possible values: default, json (default "default")
|
||||
-loggerLevel string
|
||||
|
|
@ -208,15 +208,15 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
|
|||
-loggerTimezone string
|
||||
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
|
||||
-loggerWarnsPerSecondLimit int
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
|
||||
-maxBytesPerSecond size
|
||||
The maximum upload speed. There is no limit if it is set to 0
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-memory.allowedBytes size
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to non-zero value. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-memory.allowedPercent float
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage (default 60)
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||
-origin string
|
||||
Optional origin directory on the remote storage with old backup for server-side copying when performing full backup. This speeds up full backups
|
||||
-snapshot.createURL string
|
||||
|
|
|
|||
|
|
@ -98,7 +98,7 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
|
|||
-loggerDisableTimestamps
|
||||
Whether to disable writing timestamps in logs
|
||||
-loggerErrorsPerSecondLimit int
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, then the remaining errors are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
|
||||
-loggerFormat string
|
||||
Format for logs. Possible values: default, json (default "default")
|
||||
-loggerLevel string
|
||||
|
|
@ -108,15 +108,15 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
|
|||
-loggerTimezone string
|
||||
Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
|
||||
-loggerWarnsPerSecondLimit int
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero value disables the rate limit
|
||||
Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
|
||||
-maxBytesPerSecond size
|
||||
The maximum download speed. There is no limit if it is set to 0
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-memory.allowedBytes size
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to non-zero value. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage
|
||||
Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
|
||||
Supports the following optional suffixes for size values: KB, MB, GB, KiB, MiB, GiB (default 0)
|
||||
-memory.allowedPercent float
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low value may increase cache miss rate, which usually results in higher CPU and disk IO usage. Too high value may evict too much data from OS page cache, which will result in higher disk IO usage (default 60)
|
||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||
-skipBackupCompleteCheck
|
||||
Whether to skip checking for 'backup complete' file in -src. This may be useful for restoring from old backups, which were created without 'backup complete' file
|
||||
-src string
|
||||
|
|
|
|||
Loading…
Reference in a new issue