mirror of
https://github.com/VictoriaMetrics/VictoriaMetrics.git
synced 2024-12-01 14:47:38 +00:00
Merge branch 'public-single-node' into pmm-6401-read-prometheus-data-files
This commit is contained in:
commit
af37ec8020
8 changed files with 326 additions and 234 deletions
|
@ -187,6 +187,10 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
|
||||||
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
|
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
|
||||||
-envflag.prefix string
|
-envflag.prefix string
|
||||||
Prefix for environment variables if -envflag.enable is set
|
Prefix for environment variables if -envflag.enable is set
|
||||||
|
-eula
|
||||||
|
By specifying this flag, you confirm that you have an enterprise license and accept the EULA https://victoriametrics.com/assets/VM_EULA.pdf
|
||||||
|
-flagsAuthKey string
|
||||||
|
Auth key for /flags endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-fs.disableMmap
|
-fs.disableMmap
|
||||||
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
||||||
-http.connTimeout duration
|
-http.connTimeout duration
|
||||||
|
@ -230,11 +234,11 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
|
||||||
-memory.allowedPercent float
|
-memory.allowedPercent float
|
||||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||||
-metricsAuthKey string
|
-metricsAuthKey string
|
||||||
Auth key for /metrics. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-origin string
|
-origin string
|
||||||
Optional origin directory on the remote storage with old backup for server-side copying when performing full backup. This speeds up full backups
|
Optional origin directory on the remote storage with old backup for server-side copying when performing full backup. This speeds up full backups
|
||||||
-pprofAuthKey string
|
-pprofAuthKey string
|
||||||
Auth key for /debug/pprof. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-s3ForcePathStyle
|
-s3ForcePathStyle
|
||||||
Prefixing endpoint with bucket name when set false, true by default. (default true)
|
Prefixing endpoint with bucket name when set false, true by default. (default true)
|
||||||
-snapshot.createURL string
|
-snapshot.createURL string
|
||||||
|
@ -246,11 +250,14 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
|
||||||
-storageDataPath string
|
-storageDataPath string
|
||||||
Path to VictoriaMetrics data. Must match -storageDataPath from VictoriaMetrics or vmstorage (default "victoria-metrics-data")
|
Path to VictoriaMetrics data. Must match -storageDataPath from VictoriaMetrics or vmstorage (default "victoria-metrics-data")
|
||||||
-tls
|
-tls
|
||||||
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
||||||
-tlsCertFile string
|
-tlsCertFile string
|
||||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower
|
Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
|
||||||
|
-tlsCipherSuites array
|
||||||
|
Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
|
||||||
|
Supports an array of values separated by comma or specified via multiple flags.
|
||||||
-tlsKeyFile string
|
-tlsKeyFile string
|
||||||
Path to file with TLS key. Used only if -tls is set
|
Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
|
||||||
-version
|
-version
|
||||||
Show VictoriaMetrics version
|
Show VictoriaMetrics version
|
||||||
```
|
```
|
||||||
|
|
|
@ -183,6 +183,8 @@ vmbackupmanager performs regular backups according to the provided configs.
|
||||||
Prefix for environment variables if -envflag.enable is set
|
Prefix for environment variables if -envflag.enable is set
|
||||||
-eula
|
-eula
|
||||||
By specifying this flag, you confirm that you have an enterprise license and accept the EULA https://victoriametrics.com/assets/VM_EULA.pdf
|
By specifying this flag, you confirm that you have an enterprise license and accept the EULA https://victoriametrics.com/assets/VM_EULA.pdf
|
||||||
|
-flagsAuthKey string
|
||||||
|
Auth key for /flags endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-fs.disableMmap
|
-fs.disableMmap
|
||||||
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
||||||
-http.connTimeout duration
|
-http.connTimeout duration
|
||||||
|
@ -233,9 +235,9 @@ vmbackupmanager performs regular backups according to the provided configs.
|
||||||
-memory.allowedPercent float
|
-memory.allowedPercent float
|
||||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||||
-metricsAuthKey string
|
-metricsAuthKey string
|
||||||
Auth key for /metrics. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-pprofAuthKey string
|
-pprofAuthKey string
|
||||||
Auth key for /debug/pprof. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-runOnStart
|
-runOnStart
|
||||||
Upload backups immediately after start of the service. Otherwise the backup starts on new hour
|
Upload backups immediately after start of the service. Otherwise the backup starts on new hour
|
||||||
-s3ForcePathStyle
|
-s3ForcePathStyle
|
||||||
|
|
|
@ -182,14 +182,36 @@ The shortlist of configuration flags include the following:
|
||||||
Whether to add type prefix to -datasource.url based on the query type. Set to true if sending different query types to the vmselect URL.
|
Whether to add type prefix to -datasource.url based on the query type. Set to true if sending different query types to the vmselect URL.
|
||||||
-datasource.basicAuth.password string
|
-datasource.basicAuth.password string
|
||||||
Optional basic auth password for -datasource.url
|
Optional basic auth password for -datasource.url
|
||||||
|
-datasource.basicAuth.passwordFile string
|
||||||
|
Optional path to basic auth password to use for -datasource.url
|
||||||
-datasource.basicAuth.username string
|
-datasource.basicAuth.username string
|
||||||
Optional basic auth username for -datasource.url
|
Optional basic auth username for -datasource.url
|
||||||
|
-datasource.bearerToken string
|
||||||
|
Optional bearer auth token to use for -datasource.url.
|
||||||
|
-datasource.bearerTokenFile string
|
||||||
|
Optional path to bearer token file to use for -datasource.url.
|
||||||
|
-datasource.disableKeepAlive
|
||||||
|
Whether to disable long-lived connections to the datasource. If true, disables HTTP keep-alives and will only use the connection to the server for a single HTTP request.
|
||||||
-datasource.lookback duration
|
-datasource.lookback duration
|
||||||
Lookback defines how far into the past to look when evaluating queries. For example, if the datasource.lookback=5m then param "time" with value now()-5m will be added to every query.
|
Lookback defines how far into the past to look when evaluating queries. For example, if the datasource.lookback=5m then param "time" with value now()-5m will be added to every query.
|
||||||
-datasource.maxIdleConnections int
|
-datasource.maxIdleConnections int
|
||||||
Defines the number of idle (keep-alive connections) to each configured datasource. Consider setting this value equal to the value: groups_total * group.concurrency. Too low a value may result in a high number of sockets in TIME_WAIT state. (default 100)
|
Defines the number of idle (keep-alive connections) to each configured datasource. Consider setting this value equal to the value: groups_total * group.concurrency. Too low a value may result in a high number of sockets in TIME_WAIT state. (default 100)
|
||||||
|
-datasource.oauth2.clientID string
|
||||||
|
Optional OAuth2 clientID to use for -datasource.url.
|
||||||
|
-datasource.oauth2.clientSecret string
|
||||||
|
Optional OAuth2 clientSecret to use for -datasource.url.
|
||||||
|
-datasource.oauth2.clientSecretFile string
|
||||||
|
Optional OAuth2 clientSecretFile to use for -datasource.url.
|
||||||
|
-datasource.oauth2.scopes string
|
||||||
|
Optional OAuth2 scopes to use for -datasource.url. Scopes must be delimited by ';'
|
||||||
|
-datasource.oauth2.tokenUrl string
|
||||||
|
Optional OAuth2 tokenURL to use for -datasource.url.
|
||||||
-datasource.queryStep duration
|
-datasource.queryStep duration
|
||||||
queryStep defines how far a value can fallback to when evaluating queries. For example, if datasource.queryStep=15s then param "step" with value "15s" will be added to every query.
|
queryStep defines how far a value can fallback to when evaluating queries. For example, if datasource.queryStep=15s then param "step" with value "15s" will be added to every query.If queryStep isn't specified, rule's evaluationInterval will be used instead.
|
||||||
|
-datasource.queryTimeAlignment
|
||||||
|
Whether to align "time" parameter with evaluation interval.Alignment supposed to produce deterministic results despite of number of vmalert replicas or time they were started. See more details here https://github.com/VictoriaMetrics/VictoriaMetrics/pull/1257 (default true)
|
||||||
|
-datasource.roundDigits int
|
||||||
|
Adds "round_digits" GET param to datasource requests. In VM "round_digits" limits the number of digits after the decimal point in response values.
|
||||||
-datasource.tlsCAFile string
|
-datasource.tlsCAFile string
|
||||||
Optional path to TLS CA file to use for verifying connections to -datasource.url. By default, system CA is used
|
Optional path to TLS CA file to use for verifying connections to -datasource.url. By default, system CA is used
|
||||||
-datasource.tlsCertFile string
|
-datasource.tlsCertFile string
|
||||||
|
@ -201,7 +223,7 @@ The shortlist of configuration flags include the following:
|
||||||
-datasource.tlsServerName string
|
-datasource.tlsServerName string
|
||||||
Optional TLS server name to use for connections to -datasource.url. By default, the server name from -datasource.url is used
|
Optional TLS server name to use for connections to -datasource.url. By default, the server name from -datasource.url is used
|
||||||
-datasource.url string
|
-datasource.url string
|
||||||
VictoriaMetrics or vmselect url. Required parameter. E.g. http://127.0.0.1:8428
|
VictoriaMetrics or vmselect url. Required parameter. E.g. http://127.0.0.1:8428 . See also -remoteRead.disablePathAppend
|
||||||
-enable.auth
|
-enable.auth
|
||||||
enables auth with jwt token
|
enables auth with jwt token
|
||||||
-enable.rateLimit
|
-enable.rateLimit
|
||||||
|
@ -209,13 +231,15 @@ The shortlist of configuration flags include the following:
|
||||||
-enableTCP6
|
-enableTCP6
|
||||||
Whether to enable IPv6 for listening and dialing. By default only IPv4 TCP and UDP is used
|
Whether to enable IPv6 for listening and dialing. By default only IPv4 TCP and UDP is used
|
||||||
-envflag.enable
|
-envflag.enable
|
||||||
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set
|
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
|
||||||
-envflag.prefix string
|
-envflag.prefix string
|
||||||
Prefix for environment variables if -envflag.enable is set
|
Prefix for environment variables if -envflag.enable is set
|
||||||
-eula
|
-eula
|
||||||
By specifying this flag, you confirm that you have an enterprise license and accept the EULA https://victoriametrics.com/legal/eula/
|
By specifying this flag, you confirm that you have an enterprise license and accept the EULA https://victoriametrics.com/assets/VM_EULA.pdf
|
||||||
|
-flagsAuthKey string
|
||||||
|
Auth key for /flags endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-fs.disableMmap
|
-fs.disableMmap
|
||||||
Whether to use pread() instead of mmap() for reading data files. By default, mmap() is used for 64-bit arches and pread() is used for 32-bit arches as they cannot read data files larger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
||||||
-http.connTimeout duration
|
-http.connTimeout duration
|
||||||
Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
|
Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
|
||||||
-http.disableResponseCompression
|
-http.disableResponseCompression
|
||||||
|
@ -254,11 +278,13 @@ The shortlist of configuration flags include the following:
|
||||||
-memory.allowedPercent float
|
-memory.allowedPercent float
|
||||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||||
-metricsAuthKey string
|
-metricsAuthKey string
|
||||||
Auth key for /metrics. It overrides httpAuth settings
|
Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-pprofAuthKey string
|
-pprofAuthKey string
|
||||||
Auth key for /debug/pprof. It overrides httpAuth settings
|
Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-ratelimit.config string
|
-ratelimit.config string
|
||||||
path for configuration file
|
path for configuration file. Accepts url address
|
||||||
|
-ratelimit.configCheckInterval duration
|
||||||
|
interval for config file re-read. Zero value disables config re-reading. By default, refreshing is disabled, send SIGHUP for config refresh.
|
||||||
-ratelimit.extraLabels array
|
-ratelimit.extraLabels array
|
||||||
additional labels, that will be applied to fetchdata from datasource
|
additional labels, that will be applied to fetchdata from datasource
|
||||||
Supports an array of values separated by comma or specified via multiple flags.
|
Supports an array of values separated by comma or specified via multiple flags.
|
||||||
|
@ -266,17 +292,21 @@ The shortlist of configuration flags include the following:
|
||||||
(default 5s)
|
(default 5s)
|
||||||
-read.url string
|
-read.url string
|
||||||
read access url address, example: http://vmselect:8481
|
read access url address, example: http://vmselect:8481
|
||||||
|
-remoteRead.disablePathAppend
|
||||||
|
Whether to disable automatic appending of '/api/v1/query' path to the configured -datasource.url and -remoteRead.url
|
||||||
-tls
|
-tls
|
||||||
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
||||||
-tlsCertFile string
|
-tlsCertFile string
|
||||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower
|
Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
|
||||||
|
-tlsCipherSuites array
|
||||||
|
Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
|
||||||
|
Supports an array of values separated by comma or specified via multiple flags.
|
||||||
-tlsKeyFile string
|
-tlsKeyFile string
|
||||||
Path to file with TLS key. Used only if -tls is set
|
Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
|
||||||
-version
|
-version
|
||||||
Show VictoriaMetrics version
|
Show VictoriaMetrics version
|
||||||
-write.url string
|
-write.url string
|
||||||
write access url address, example: http://vminsert:8480
|
write access url address, example: http://vminsert:8480
|
||||||
|
|
||||||
```
|
```
|
||||||
|
|
||||||
## TroubleShooting
|
## TroubleShooting
|
||||||
|
|
|
@ -91,6 +91,10 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
|
||||||
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
|
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
|
||||||
-envflag.prefix string
|
-envflag.prefix string
|
||||||
Prefix for environment variables if -envflag.enable is set
|
Prefix for environment variables if -envflag.enable is set
|
||||||
|
-eula
|
||||||
|
By specifying this flag, you confirm that you have an enterprise license and accept the EULA https://victoriametrics.com/assets/VM_EULA.pdf
|
||||||
|
-flagsAuthKey string
|
||||||
|
Auth key for /flags endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-fs.disableMmap
|
-fs.disableMmap
|
||||||
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
||||||
-http.connTimeout duration
|
-http.connTimeout duration
|
||||||
|
@ -134,9 +138,9 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
|
||||||
-memory.allowedPercent float
|
-memory.allowedPercent float
|
||||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||||
-metricsAuthKey string
|
-metricsAuthKey string
|
||||||
Auth key for /metrics. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-pprofAuthKey string
|
-pprofAuthKey string
|
||||||
Auth key for /debug/pprof. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-s3ForcePathStyle
|
-s3ForcePathStyle
|
||||||
Prefixing endpoint with bucket name when set false, true by default. (default true)
|
Prefixing endpoint with bucket name when set false, true by default. (default true)
|
||||||
-skipBackupCompleteCheck
|
-skipBackupCompleteCheck
|
||||||
|
@ -146,11 +150,14 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
|
||||||
-storageDataPath string
|
-storageDataPath string
|
||||||
Destination path where backup must be restored. VictoriaMetrics must be stopped when restoring from backup. -storageDataPath dir can be non-empty. In this case the contents of -storageDataPath dir is synchronized with -src contents, i.e. it works like 'rsync --delete' (default "victoria-metrics-data")
|
Destination path where backup must be restored. VictoriaMetrics must be stopped when restoring from backup. -storageDataPath dir can be non-empty. In this case the contents of -storageDataPath dir is synchronized with -src contents, i.e. it works like 'rsync --delete' (default "victoria-metrics-data")
|
||||||
-tls
|
-tls
|
||||||
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
||||||
-tlsCertFile string
|
-tlsCertFile string
|
||||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower
|
Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
|
||||||
|
-tlsCipherSuites array
|
||||||
|
Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
|
||||||
|
Supports an array of values separated by comma or specified via multiple flags.
|
||||||
-tlsKeyFile string
|
-tlsKeyFile string
|
||||||
Path to file with TLS key. Used only if -tls is set
|
Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
|
||||||
-version
|
-version
|
||||||
Show VictoriaMetrics version
|
Show VictoriaMetrics version
|
||||||
```
|
```
|
||||||
|
|
|
@ -191,6 +191,10 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
|
||||||
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
|
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
|
||||||
-envflag.prefix string
|
-envflag.prefix string
|
||||||
Prefix for environment variables if -envflag.enable is set
|
Prefix for environment variables if -envflag.enable is set
|
||||||
|
-eula
|
||||||
|
By specifying this flag, you confirm that you have an enterprise license and accept the EULA https://victoriametrics.com/assets/VM_EULA.pdf
|
||||||
|
-flagsAuthKey string
|
||||||
|
Auth key for /flags endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-fs.disableMmap
|
-fs.disableMmap
|
||||||
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
||||||
-http.connTimeout duration
|
-http.connTimeout duration
|
||||||
|
@ -234,11 +238,11 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
|
||||||
-memory.allowedPercent float
|
-memory.allowedPercent float
|
||||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||||
-metricsAuthKey string
|
-metricsAuthKey string
|
||||||
Auth key for /metrics. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-origin string
|
-origin string
|
||||||
Optional origin directory on the remote storage with old backup for server-side copying when performing full backup. This speeds up full backups
|
Optional origin directory on the remote storage with old backup for server-side copying when performing full backup. This speeds up full backups
|
||||||
-pprofAuthKey string
|
-pprofAuthKey string
|
||||||
Auth key for /debug/pprof. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-s3ForcePathStyle
|
-s3ForcePathStyle
|
||||||
Prefixing endpoint with bucket name when set false, true by default. (default true)
|
Prefixing endpoint with bucket name when set false, true by default. (default true)
|
||||||
-snapshot.createURL string
|
-snapshot.createURL string
|
||||||
|
@ -250,11 +254,14 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
|
||||||
-storageDataPath string
|
-storageDataPath string
|
||||||
Path to VictoriaMetrics data. Must match -storageDataPath from VictoriaMetrics or vmstorage (default "victoria-metrics-data")
|
Path to VictoriaMetrics data. Must match -storageDataPath from VictoriaMetrics or vmstorage (default "victoria-metrics-data")
|
||||||
-tls
|
-tls
|
||||||
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
||||||
-tlsCertFile string
|
-tlsCertFile string
|
||||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower
|
Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
|
||||||
|
-tlsCipherSuites array
|
||||||
|
Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
|
||||||
|
Supports an array of values separated by comma or specified via multiple flags.
|
||||||
-tlsKeyFile string
|
-tlsKeyFile string
|
||||||
Path to file with TLS key. Used only if -tls is set
|
Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
|
||||||
-version
|
-version
|
||||||
Show VictoriaMetrics version
|
Show VictoriaMetrics version
|
||||||
```
|
```
|
||||||
|
|
|
@ -187,6 +187,8 @@ vmbackupmanager performs regular backups according to the provided configs.
|
||||||
Prefix for environment variables if -envflag.enable is set
|
Prefix for environment variables if -envflag.enable is set
|
||||||
-eula
|
-eula
|
||||||
By specifying this flag, you confirm that you have an enterprise license and accept the EULA https://victoriametrics.com/assets/VM_EULA.pdf
|
By specifying this flag, you confirm that you have an enterprise license and accept the EULA https://victoriametrics.com/assets/VM_EULA.pdf
|
||||||
|
-flagsAuthKey string
|
||||||
|
Auth key for /flags endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-fs.disableMmap
|
-fs.disableMmap
|
||||||
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
||||||
-http.connTimeout duration
|
-http.connTimeout duration
|
||||||
|
@ -237,9 +239,9 @@ vmbackupmanager performs regular backups according to the provided configs.
|
||||||
-memory.allowedPercent float
|
-memory.allowedPercent float
|
||||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||||
-metricsAuthKey string
|
-metricsAuthKey string
|
||||||
Auth key for /metrics. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-pprofAuthKey string
|
-pprofAuthKey string
|
||||||
Auth key for /debug/pprof. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-runOnStart
|
-runOnStart
|
||||||
Upload backups immediately after start of the service. Otherwise the backup starts on new hour
|
Upload backups immediately after start of the service. Otherwise the backup starts on new hour
|
||||||
-s3ForcePathStyle
|
-s3ForcePathStyle
|
||||||
|
|
|
@ -186,14 +186,36 @@ The shortlist of configuration flags include the following:
|
||||||
Whether to add type prefix to -datasource.url based on the query type. Set to true if sending different query types to the vmselect URL.
|
Whether to add type prefix to -datasource.url based on the query type. Set to true if sending different query types to the vmselect URL.
|
||||||
-datasource.basicAuth.password string
|
-datasource.basicAuth.password string
|
||||||
Optional basic auth password for -datasource.url
|
Optional basic auth password for -datasource.url
|
||||||
|
-datasource.basicAuth.passwordFile string
|
||||||
|
Optional path to basic auth password to use for -datasource.url
|
||||||
-datasource.basicAuth.username string
|
-datasource.basicAuth.username string
|
||||||
Optional basic auth username for -datasource.url
|
Optional basic auth username for -datasource.url
|
||||||
|
-datasource.bearerToken string
|
||||||
|
Optional bearer auth token to use for -datasource.url.
|
||||||
|
-datasource.bearerTokenFile string
|
||||||
|
Optional path to bearer token file to use for -datasource.url.
|
||||||
|
-datasource.disableKeepAlive
|
||||||
|
Whether to disable long-lived connections to the datasource. If true, disables HTTP keep-alives and will only use the connection to the server for a single HTTP request.
|
||||||
-datasource.lookback duration
|
-datasource.lookback duration
|
||||||
Lookback defines how far into the past to look when evaluating queries. For example, if the datasource.lookback=5m then param "time" with value now()-5m will be added to every query.
|
Lookback defines how far into the past to look when evaluating queries. For example, if the datasource.lookback=5m then param "time" with value now()-5m will be added to every query.
|
||||||
-datasource.maxIdleConnections int
|
-datasource.maxIdleConnections int
|
||||||
Defines the number of idle (keep-alive connections) to each configured datasource. Consider setting this value equal to the value: groups_total * group.concurrency. Too low a value may result in a high number of sockets in TIME_WAIT state. (default 100)
|
Defines the number of idle (keep-alive connections) to each configured datasource. Consider setting this value equal to the value: groups_total * group.concurrency. Too low a value may result in a high number of sockets in TIME_WAIT state. (default 100)
|
||||||
|
-datasource.oauth2.clientID string
|
||||||
|
Optional OAuth2 clientID to use for -datasource.url.
|
||||||
|
-datasource.oauth2.clientSecret string
|
||||||
|
Optional OAuth2 clientSecret to use for -datasource.url.
|
||||||
|
-datasource.oauth2.clientSecretFile string
|
||||||
|
Optional OAuth2 clientSecretFile to use for -datasource.url.
|
||||||
|
-datasource.oauth2.scopes string
|
||||||
|
Optional OAuth2 scopes to use for -datasource.url. Scopes must be delimited by ';'
|
||||||
|
-datasource.oauth2.tokenUrl string
|
||||||
|
Optional OAuth2 tokenURL to use for -datasource.url.
|
||||||
-datasource.queryStep duration
|
-datasource.queryStep duration
|
||||||
queryStep defines how far a value can fallback to when evaluating queries. For example, if datasource.queryStep=15s then param "step" with value "15s" will be added to every query.
|
queryStep defines how far a value can fallback to when evaluating queries. For example, if datasource.queryStep=15s then param "step" with value "15s" will be added to every query.If queryStep isn't specified, rule's evaluationInterval will be used instead.
|
||||||
|
-datasource.queryTimeAlignment
|
||||||
|
Whether to align "time" parameter with evaluation interval.Alignment supposed to produce deterministic results despite of number of vmalert replicas or time they were started. See more details here https://github.com/VictoriaMetrics/VictoriaMetrics/pull/1257 (default true)
|
||||||
|
-datasource.roundDigits int
|
||||||
|
Adds "round_digits" GET param to datasource requests. In VM "round_digits" limits the number of digits after the decimal point in response values.
|
||||||
-datasource.tlsCAFile string
|
-datasource.tlsCAFile string
|
||||||
Optional path to TLS CA file to use for verifying connections to -datasource.url. By default, system CA is used
|
Optional path to TLS CA file to use for verifying connections to -datasource.url. By default, system CA is used
|
||||||
-datasource.tlsCertFile string
|
-datasource.tlsCertFile string
|
||||||
|
@ -205,7 +227,7 @@ The shortlist of configuration flags include the following:
|
||||||
-datasource.tlsServerName string
|
-datasource.tlsServerName string
|
||||||
Optional TLS server name to use for connections to -datasource.url. By default, the server name from -datasource.url is used
|
Optional TLS server name to use for connections to -datasource.url. By default, the server name from -datasource.url is used
|
||||||
-datasource.url string
|
-datasource.url string
|
||||||
VictoriaMetrics or vmselect url. Required parameter. E.g. http://127.0.0.1:8428
|
VictoriaMetrics or vmselect url. Required parameter. E.g. http://127.0.0.1:8428 . See also -remoteRead.disablePathAppend
|
||||||
-enable.auth
|
-enable.auth
|
||||||
enables auth with jwt token
|
enables auth with jwt token
|
||||||
-enable.rateLimit
|
-enable.rateLimit
|
||||||
|
@ -213,13 +235,15 @@ The shortlist of configuration flags include the following:
|
||||||
-enableTCP6
|
-enableTCP6
|
||||||
Whether to enable IPv6 for listening and dialing. By default only IPv4 TCP and UDP is used
|
Whether to enable IPv6 for listening and dialing. By default only IPv4 TCP and UDP is used
|
||||||
-envflag.enable
|
-envflag.enable
|
||||||
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set
|
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
|
||||||
-envflag.prefix string
|
-envflag.prefix string
|
||||||
Prefix for environment variables if -envflag.enable is set
|
Prefix for environment variables if -envflag.enable is set
|
||||||
-eula
|
-eula
|
||||||
By specifying this flag, you confirm that you have an enterprise license and accept the EULA https://victoriametrics.com/legal/eula/
|
By specifying this flag, you confirm that you have an enterprise license and accept the EULA https://victoriametrics.com/assets/VM_EULA.pdf
|
||||||
|
-flagsAuthKey string
|
||||||
|
Auth key for /flags endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-fs.disableMmap
|
-fs.disableMmap
|
||||||
Whether to use pread() instead of mmap() for reading data files. By default, mmap() is used for 64-bit arches and pread() is used for 32-bit arches as they cannot read data files larger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
||||||
-http.connTimeout duration
|
-http.connTimeout duration
|
||||||
Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
|
Incoming http connections are closed after the configured timeout. This may help to spread the incoming load among a cluster of services behind a load balancer. Please note that the real timeout may be bigger by up to 10% as a protection against the thundering herd problem (default 2m0s)
|
||||||
-http.disableResponseCompression
|
-http.disableResponseCompression
|
||||||
|
@ -258,11 +282,13 @@ The shortlist of configuration flags include the following:
|
||||||
-memory.allowedPercent float
|
-memory.allowedPercent float
|
||||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||||
-metricsAuthKey string
|
-metricsAuthKey string
|
||||||
Auth key for /metrics. It overrides httpAuth settings
|
Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-pprofAuthKey string
|
-pprofAuthKey string
|
||||||
Auth key for /debug/pprof. It overrides httpAuth settings
|
Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-ratelimit.config string
|
-ratelimit.config string
|
||||||
path for configuration file
|
path for configuration file. Accepts url address
|
||||||
|
-ratelimit.configCheckInterval duration
|
||||||
|
interval for config file re-read. Zero value disables config re-reading. By default, refreshing is disabled, send SIGHUP for config refresh.
|
||||||
-ratelimit.extraLabels array
|
-ratelimit.extraLabels array
|
||||||
additional labels, that will be applied to fetchdata from datasource
|
additional labels, that will be applied to fetchdata from datasource
|
||||||
Supports an array of values separated by comma or specified via multiple flags.
|
Supports an array of values separated by comma or specified via multiple flags.
|
||||||
|
@ -270,17 +296,21 @@ The shortlist of configuration flags include the following:
|
||||||
(default 5s)
|
(default 5s)
|
||||||
-read.url string
|
-read.url string
|
||||||
read access url address, example: http://vmselect:8481
|
read access url address, example: http://vmselect:8481
|
||||||
|
-remoteRead.disablePathAppend
|
||||||
|
Whether to disable automatic appending of '/api/v1/query' path to the configured -datasource.url and -remoteRead.url
|
||||||
-tls
|
-tls
|
||||||
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
||||||
-tlsCertFile string
|
-tlsCertFile string
|
||||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower
|
Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
|
||||||
|
-tlsCipherSuites array
|
||||||
|
Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
|
||||||
|
Supports an array of values separated by comma or specified via multiple flags.
|
||||||
-tlsKeyFile string
|
-tlsKeyFile string
|
||||||
Path to file with TLS key. Used only if -tls is set
|
Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
|
||||||
-version
|
-version
|
||||||
Show VictoriaMetrics version
|
Show VictoriaMetrics version
|
||||||
-write.url string
|
-write.url string
|
||||||
write access url address, example: http://vminsert:8480
|
write access url address, example: http://vminsert:8480
|
||||||
|
|
||||||
```
|
```
|
||||||
|
|
||||||
## TroubleShooting
|
## TroubleShooting
|
||||||
|
|
|
@ -95,6 +95,10 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
|
||||||
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
|
Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
|
||||||
-envflag.prefix string
|
-envflag.prefix string
|
||||||
Prefix for environment variables if -envflag.enable is set
|
Prefix for environment variables if -envflag.enable is set
|
||||||
|
-eula
|
||||||
|
By specifying this flag, you confirm that you have an enterprise license and accept the EULA https://victoriametrics.com/assets/VM_EULA.pdf
|
||||||
|
-flagsAuthKey string
|
||||||
|
Auth key for /flags endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-fs.disableMmap
|
-fs.disableMmap
|
||||||
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
Whether to use pread() instead of mmap() for reading data files. By default mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
|
||||||
-http.connTimeout duration
|
-http.connTimeout duration
|
||||||
|
@ -138,9 +142,9 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
|
||||||
-memory.allowedPercent float
|
-memory.allowedPercent float
|
||||||
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
|
||||||
-metricsAuthKey string
|
-metricsAuthKey string
|
||||||
Auth key for /metrics. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-pprofAuthKey string
|
-pprofAuthKey string
|
||||||
Auth key for /debug/pprof. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides httpAuth.* settings
|
||||||
-s3ForcePathStyle
|
-s3ForcePathStyle
|
||||||
Prefixing endpoint with bucket name when set false, true by default. (default true)
|
Prefixing endpoint with bucket name when set false, true by default. (default true)
|
||||||
-skipBackupCompleteCheck
|
-skipBackupCompleteCheck
|
||||||
|
@ -150,11 +154,14 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
|
||||||
-storageDataPath string
|
-storageDataPath string
|
||||||
Destination path where backup must be restored. VictoriaMetrics must be stopped when restoring from backup. -storageDataPath dir can be non-empty. In this case the contents of -storageDataPath dir is synchronized with -src contents, i.e. it works like 'rsync --delete' (default "victoria-metrics-data")
|
Destination path where backup must be restored. VictoriaMetrics must be stopped when restoring from backup. -storageDataPath dir can be non-empty. In this case the contents of -storageDataPath dir is synchronized with -src contents, i.e. it works like 'rsync --delete' (default "victoria-metrics-data")
|
||||||
-tls
|
-tls
|
||||||
Whether to enable TLS (aka HTTPS) for incoming requests. -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
Whether to enable TLS for incoming HTTP requests at -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set
|
||||||
-tlsCertFile string
|
-tlsCertFile string
|
||||||
Path to file with TLS certificate. Used only if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower
|
Path to file with TLS certificate if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated
|
||||||
|
-tlsCipherSuites array
|
||||||
|
Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
|
||||||
|
Supports an array of values separated by comma or specified via multiple flags.
|
||||||
-tlsKeyFile string
|
-tlsKeyFile string
|
||||||
Path to file with TLS key. Used only if -tls is set
|
Path to file with TLS key if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated
|
||||||
-version
|
-version
|
||||||
Show VictoriaMetrics version
|
Show VictoriaMetrics version
|
||||||
```
|
```
|
||||||
|
|
Loading…
Reference in a new issue