docs: follow-up after aec4b5db81 (#4638)

Signed-off-by: hagen1778 <roman@victoriametrics.com>

README.md

@@ -2253,9 +2253,9 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -dryRun
      Whether to check config files without running VictoriaMetrics. The following config files are checked: -promscrape.config, -relabelConfig and -streamAggr.config. Unknown config entries aren't allowed in -promscrape.config by default. This can be changed with -promscrape.config.strictParse=false command-line flag
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -2320,7 +2320,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -influxTrimTimestamp duration
      Trim timestamps for InfluxDB line protocol data to this duration. Minimum practical duration is 1ms. Higher duration (i.e. 1s) may be used for reducing disk space usage for timestamp data (default 1ms)
   -inmemoryDataFlushInterval duration
-     The interval for guaranteed saving of in-memory data to disk. The saved data survives unclean shutdown such as OOM crash, hardware reset, SIGKILL, etc. Bigger intervals may help increasing lifetime of flash storage with limited write cycles (e.g. Raspberry PI). Smaller intervals increase disk IO load. Minimum supported value is 1s (default 5s)
+     The interval for guaranteed saving of in-memory data to disk. The saved data survives unclean shutdowns such as OOM crash, hardware reset, SIGKILL, etc. Bigger intervals may help increase the lifetime of flash storage with limited write cycles (e.g. Raspberry PI). Smaller intervals increase disk IO load. Minimum supported value is 1s (default 5s)
   -insert.maxQueueDuration duration
      The maximum duration to wait in the queue when -maxConcurrentInserts concurrent insert requests are executed (default 1m0s)
   -internStringCacheExpireDuration duration
@@ -2328,7 +2328,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -logNewSeries
      Whether to log new series. This option is for debug purposes only. It can lead to performance issues when big number of new series are ingested into VictoriaMetrics
   -loggerDisableTimestamps
@@ -2348,7 +2348,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -loggerWarnsPerSecondLimit int
      Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
   -maxConcurrentInserts int
-     The maximum number of concurrent insert requests. Default value should work for most cases, since it minimizes the memory usage. The default value can be increased when clients send data over slow networks. See also -insert.maxQueueDuration (default 8)
+     The maximum number of concurrent insert requests. The default value should work for most cases, since it minimizes memory usage. The default value can be increased when clients send data over slow networks. See also -insert.maxQueueDuration (default 8)
   -maxInsertRequestSize size
      The maximum size in bytes of a single Prometheus remote_write API request
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 33554432)
@@ -2357,10 +2357,10 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -maxLabelsPerTimeseries int
      The maximum number of labels accepted per time series. Superfluous labels are dropped. In this case the vm_metrics_with_dropped_labels_total metric at /metrics page is incremented (default 30)
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -opentsdbHTTPListenAddr string

app/victoria-metrics/main.go

@@ -36,8 +36,8 @@ var (
 		"-promscrape.config, -relabelConfig and -streamAggr.config. Unknown config entries aren't allowed in -promscrape.config by default. "+
 		"This can be changed with -promscrape.config.strictParse=false command-line flag")
 	inmemoryDataFlushInterval = flag.Duration("inmemoryDataFlushInterval", 5*time.Second, "The interval for guaranteed saving of in-memory data to disk. "+
-		"The saved data survives unclean shutdown such as OOM crash, hardware reset, SIGKILL, etc. "+
-		"Bigger intervals may help increasing lifetime of flash storage with limited write cycles (e.g. Raspberry PI). "+
+		"The saved data survives unclean shutdowns such as OOM crash, hardware reset, SIGKILL, etc. "+
+		"Bigger intervals may help increase the lifetime of flash storage with limited write cycles (e.g. Raspberry PI). "+
 		"Smaller intervals increase disk IO load. Minimum supported value is 1s")
 )
 

app/vlselect/logsql/logsql.go

@@ -12,8 +12,8 @@ import (
 
 var (
 	maxSortBufferSize = flagutil.NewBytes("select.maxSortBufferSize", 1024*1024, "Query results from /select/logsql/query are automatically sorted by _time "+
-		"if their summary size doesn't exceed this value; otherwise query results are streamed in the response without sorting; "+
-		"too big value for this flag may result in high memory usage, since the sorting is performed in memory")
+		"if their summary size doesn't exceed this value; otherwise, query results are streamed in the response without sorting; "+
+		"too big value for this flag may result in high memory usage since the sorting is performed in memory")
 )
 
 // ProcessQueryRequest handles /select/logsql/query request

app/vlstorage/main.go

@@ -22,8 +22,8 @@ var (
 	storageDataPath = flag.String("storageDataPath", "victoria-logs-data", "Path to directory with the VictoriaLogs data; "+
 		"see https://docs.victoriametrics.com/VictoriaLogs/#storage")
 	inmemoryDataFlushInterval = flag.Duration("inmemoryDataFlushInterval", 5*time.Second, "The interval for guaranteed saving of in-memory data to disk. "+
-		"The saved data survives unclean shutdown such as OOM crash, hardware reset, SIGKILL, etc. "+
-		"Bigger intervals may help increasing lifetime of flash storage with limited write cycles (e.g. Raspberry PI). "+
+		"The saved data survives unclean shutdowns such as OOM crash, hardware reset, SIGKILL, etc. "+
+		"Bigger intervals may help increase the lifetime of flash storage with limited write cycles (e.g. Raspberry PI). "+
 		"Smaller intervals increase disk IO load. Minimum supported value is 1s")
 	logNewStreams = flag.Bool("logNewStreams", false, "Whether to log creation of new streams; this can be useful for debugging of high cardinality issues with log streams; "+
 		"see https://docs.victoriametrics.com/VictoriaLogs/keyConcepts.html#stream-fields ; see also -logIngestedRows")

app/vmagent/README.md

@@ -1196,9 +1196,9 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
   -dryRun
      Whether to check config files without running vmagent. The following files are checked: -promscrape.config, -remoteWrite.relabelConfig, -remoteWrite.urlRelabelConfig, -remoteWrite.streamAggr.config . Unknown config entries aren't allowed in -promscrape.config by default. This can be changed by passing -promscrape.config.strictParse=false command-line flag
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -1263,7 +1263,7 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -kafka.consumer.topic array
      Kafka topic names for data consumption. This flag is available only in VictoriaMetrics enterprise. See https://docs.victoriametrics.com/enterprise.html
      Supports an array of values separated by comma or specified via multiple flags.
@@ -1310,15 +1310,15 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
   -loggerWarnsPerSecondLimit int
      Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
   -maxConcurrentInserts int
-     The maximum number of concurrent insert requests. Default value should work for most cases, since it minimizes the memory usage. The default value can be increased when clients send data over slow networks. See also -insert.maxQueueDuration (default 8)
+     The maximum number of concurrent insert requests. The default value should work for most cases, since it minimizes memory usage. The default value can be increased when clients send data over slow networks. See also -insert.maxQueueDuration (default 8)
   -maxInsertRequestSize size
      The maximum size in bytes of a single Prometheus remote_write API request
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 33554432)
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -opentsdbHTTPListenAddr string

app/vmalert/README.md

@@ -967,9 +967,9 @@ The shortlist of configuration flags is the following:
   -dryRun
      Whether to check only config files without running vmalert. The rules file are validated. The -rule flag must be specified.
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -1012,7 +1012,7 @@ The shortlist of configuration flags is the following:
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -loggerDisableTimestamps
      Whether to disable writing timestamps in logs
   -loggerErrorsPerSecondLimit int
@@ -1030,10 +1030,10 @@ The shortlist of configuration flags is the following:
   -loggerWarnsPerSecondLimit int
      Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -notifier.basicAuth.password array

app/vmauth/README.md

@@ -344,9 +344,9 @@ See the docs at https://docs.victoriametrics.com/vmauth.html .
   -configCheckInterval duration
      interval for config file re-read. Zero value disables config re-reading. By default, refreshing is disabled, send SIGHUP for config refresh.
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -380,7 +380,7 @@ See the docs at https://docs.victoriametrics.com/vmauth.html .
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -logInvalidAuthTokens
      Whether to log requests with invalid auth tokens. Such requests are always counted at vmauth_http_request_errors_total{reason="invalid_auth_token"} metric, which is exposed at /metrics page
   -loggerDisableTimestamps
@@ -406,10 +406,10 @@ See the docs at https://docs.victoriametrics.com/vmauth.html .
   -maxIdleConnsPerBackend int
      The maximum number of idle connections vmauth can open per each backend host. See also -maxConcurrentRequests (default 100)
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -pprofAuthKey string

app/vmbackup/README.md

@@ -190,9 +190,9 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
      Where to put the backup on the remote storage. Example: gs://bucket/path/to/backup, s3://bucket/path/to/backup, azblob://container/path/to/backup or fs:///path/to/local/backup/dir
      -dst can point to the previous backup. In this case incremental backup is performed, i.e. only changed data is uploaded
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -224,7 +224,7 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -loggerDisableTimestamps
      Whether to disable writing timestamps in logs
   -loggerErrorsPerSecondLimit int
@@ -245,10 +245,10 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
      The maximum upload speed. There is no limit if it is set to 0
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -origin string

app/vmbackupmanager/README.md

@@ -423,9 +423,9 @@ command-line flags:
   -dst string
      The root folder of Victoria Metrics backups. Example: gs://bucket/path/to/backup/dir, s3://bucket/path/to/backup/dir or fs:///path/to/local/backup/dir
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -457,7 +457,7 @@ command-line flags:
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -keepLastDaily int
      Keep last N daily backups. If 0 is specified next retention cycle removes all backups for given time period. (default -1)
   -keepLastHourly int
@@ -485,10 +485,10 @@ command-line flags:
   -maxBytesPerSecond int
      The maximum upload speed. There is no limit if it is set to 0
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -pprofAuthKey string

app/vmgateway/README.md

@@ -332,9 +332,9 @@ The shortlist of configuration flags include the following:
   -enable.rateLimit
      enables rate limiter
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -368,7 +368,7 @@ The shortlist of configuration flags include the following:
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -loggerDisableTimestamps
      Whether to disable writing timestamps in logs
   -loggerErrorsPerSecondLimit int
@@ -386,10 +386,10 @@ The shortlist of configuration flags include the following:
   -loggerWarnsPerSecondLimit int
      Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -pprofAuthKey string

app/vmrestore/README.md

@@ -94,9 +94,9 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
   -customS3Endpoint string
      Custom S3 endpoint for use with S3-compatible storages (e.g. MinIO). S3 is used if not set
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -128,7 +128,7 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -loggerDisableTimestamps
      Whether to disable writing timestamps in logs
   -loggerErrorsPerSecondLimit int
@@ -149,10 +149,10 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
      The maximum download speed. There is no limit if it is set to 0
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -pprofAuthKey string

docs/Cluster-VictoriaMetrics.md

@@ -845,9 +845,9 @@ Below is the output for `/path/to/vminsert -help`:
   -dropSamplesOnOverload
      Whether to drop incoming samples if the destination vmstorage node is overloaded and/or unavailable. This prioritizes cluster availability over consistency, e.g. the cluster continues accepting all the ingested samples, but some of them may be dropped if vmstorage nodes are temporarily unavailable and/or overloaded
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -912,7 +912,7 @@ Below is the output for `/path/to/vminsert -help`:
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -loggerDisableTimestamps
      Whether to disable writing timestamps in logs
   -loggerErrorsPerSecondLimit int
@@ -930,7 +930,7 @@ Below is the output for `/path/to/vminsert -help`:
   -loggerWarnsPerSecondLimit int
      Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
   -maxConcurrentInserts int
-     The maximum number of concurrent insert requests. Default value should work for most cases, since it minimizes the memory usage. The default value can be increased when clients send data over slow networks. See also -insert.maxQueueDuration (default 8)
+     The maximum number of concurrent insert requests. The default value should work for most cases, since it minimizes memory usage. The default value can be increased when clients send data over slow networks. See also -insert.maxQueueDuration (default 8)
   -maxInsertRequestSize size
      The maximum size in bytes of a single Prometheus remote_write API request
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 33554432)
@@ -939,10 +939,10 @@ Below is the output for `/path/to/vminsert -help`:
   -maxLabelsPerTimeseries int
      The maximum number of labels accepted per time series. Superfluous labels are dropped. In this case the vm_metrics_with_dropped_labels_total metric at /metrics page is incremented (default 30)
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -opentsdbHTTPListenAddr string
@@ -1060,9 +1060,9 @@ Below is the output for `/path/to/vmselect -help`:
      Comma-separated downsampling periods in the format 'offset:period'. For example, '30d:10m' instructs to leave a single sample per 10 minutes for samples older than 30 days. When setting multiple downsampling periods, it is necessary for the periods to be multiples of each other. See https://docs.victoriametrics.com/#downsampling for details. This flag is available only in VictoriaMetrics enterprise. See https://docs.victoriametrics.com/enterprise.html
      Supports an array of values separated by comma or specified via multiple flags.
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -1096,7 +1096,7 @@ Below is the output for `/path/to/vmselect -help`:
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -loggerDisableTimestamps
      Whether to disable writing timestamps in logs
   -loggerErrorsPerSecondLimit int
@@ -1114,10 +1114,10 @@ Below is the output for `/path/to/vmselect -help`:
   -loggerWarnsPerSecondLimit int
      Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -pprofAuthKey string
@@ -1280,9 +1280,9 @@ Below is the output for `/path/to/vmstorage -help`:
      Comma-separated downsampling periods in the format 'offset:period'. For example, '30d:10m' instructs to leave a single sample per 10 minutes for samples older than 30 days. When setting multiple downsampling periods, it is necessary for the periods to be multiples of each other. See https://docs.victoriametrics.com/#downsampling for details. This flag is available only in VictoriaMetrics enterprise. See https://docs.victoriametrics.com/enterprise.html
      Supports an array of values separated by comma or specified via multiple flags.
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -1324,7 +1324,7 @@ Below is the output for `/path/to/vmstorage -help`:
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -logNewSeries
      Whether to log new series. This option is for debug purposes only. It can lead to performance issues when big number of new series are ingested into VictoriaMetrics
   -loggerDisableTimestamps
@@ -1344,12 +1344,12 @@ Below is the output for `/path/to/vmstorage -help`:
   -loggerWarnsPerSecondLimit int
      Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
   -maxConcurrentInserts int
-     The maximum number of concurrent insert requests. Default value should work for most cases, since it minimizes the memory usage. The default value can be increased when clients send data over slow networks. See also -insert.maxQueueDuration (default 8)
+     The maximum number of concurrent insert requests. The default value should work for most cases, since it minimizes memory usage. The default value can be increased when clients send data over slow networks. See also -insert.maxQueueDuration (default 8)
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -pprofAuthKey string

docs/README.md

@@ -2256,9 +2256,9 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -dryRun
      Whether to check config files without running VictoriaMetrics. The following config files are checked: -promscrape.config, -relabelConfig and -streamAggr.config. Unknown config entries aren't allowed in -promscrape.config by default. This can be changed with -promscrape.config.strictParse=false command-line flag
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -2323,7 +2323,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -influxTrimTimestamp duration
      Trim timestamps for InfluxDB line protocol data to this duration. Minimum practical duration is 1ms. Higher duration (i.e. 1s) may be used for reducing disk space usage for timestamp data (default 1ms)
   -inmemoryDataFlushInterval duration
-     The interval for guaranteed saving of in-memory data to disk. The saved data survives unclean shutdown such as OOM crash, hardware reset, SIGKILL, etc. Bigger intervals may help increasing lifetime of flash storage with limited write cycles (e.g. Raspberry PI). Smaller intervals increase disk IO load. Minimum supported value is 1s (default 5s)
+     The interval for guaranteed saving of in-memory data to disk. The saved data survives unclean shutdowns such as OOM crash, hardware reset, SIGKILL, etc. Bigger intervals may help increase the lifetime of flash storage with limited write cycles (e.g. Raspberry PI). Smaller intervals increase disk IO load. Minimum supported value is 1s (default 5s)
   -insert.maxQueueDuration duration
      The maximum duration to wait in the queue when -maxConcurrentInserts concurrent insert requests are executed (default 1m0s)
   -internStringCacheExpireDuration duration
@@ -2331,7 +2331,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -logNewSeries
      Whether to log new series. This option is for debug purposes only. It can lead to performance issues when big number of new series are ingested into VictoriaMetrics
   -loggerDisableTimestamps
@@ -2351,7 +2351,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -loggerWarnsPerSecondLimit int
      Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
   -maxConcurrentInserts int
-     The maximum number of concurrent insert requests. Default value should work for most cases, since it minimizes the memory usage. The default value can be increased when clients send data over slow networks. See also -insert.maxQueueDuration (default 8)
+     The maximum number of concurrent insert requests. The default value should work for most cases, since it minimizes memory usage. The default value can be increased when clients send data over slow networks. See also -insert.maxQueueDuration (default 8)
   -maxInsertRequestSize size
      The maximum size in bytes of a single Prometheus remote_write API request
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 33554432)
@@ -2360,10 +2360,10 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -maxLabelsPerTimeseries int
      The maximum number of labels accepted per time series. Superfluous labels are dropped. In this case the vm_metrics_with_dropped_labels_total metric at /metrics page is incremented (default 30)
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -opentsdbHTTPListenAddr string

docs/Single-server-VictoriaMetrics.md

@@ -2264,9 +2264,9 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -dryRun
      Whether to check config files without running VictoriaMetrics. The following config files are checked: -promscrape.config, -relabelConfig and -streamAggr.config. Unknown config entries aren't allowed in -promscrape.config by default. This can be changed with -promscrape.config.strictParse=false command-line flag
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -2331,7 +2331,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -influxTrimTimestamp duration
      Trim timestamps for InfluxDB line protocol data to this duration. Minimum practical duration is 1ms. Higher duration (i.e. 1s) may be used for reducing disk space usage for timestamp data (default 1ms)
   -inmemoryDataFlushInterval duration
-     The interval for guaranteed saving of in-memory data to disk. The saved data survives unclean shutdown such as OOM crash, hardware reset, SIGKILL, etc. Bigger intervals may help increasing lifetime of flash storage with limited write cycles (e.g. Raspberry PI). Smaller intervals increase disk IO load. Minimum supported value is 1s (default 5s)
+     The interval for guaranteed saving of in-memory data to disk. The saved data survives unclean shutdowns such as OOM crash, hardware reset, SIGKILL, etc. Bigger intervals may help increase the lifetime of flash storage with limited write cycles (e.g. Raspberry PI). Smaller intervals increase disk IO load. Minimum supported value is 1s (default 5s)
   -insert.maxQueueDuration duration
      The maximum duration to wait in the queue when -maxConcurrentInserts concurrent insert requests are executed (default 1m0s)
   -internStringCacheExpireDuration duration
@@ -2339,7 +2339,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -logNewSeries
      Whether to log new series. This option is for debug purposes only. It can lead to performance issues when big number of new series are ingested into VictoriaMetrics
   -loggerDisableTimestamps
@@ -2359,7 +2359,7 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -loggerWarnsPerSecondLimit int
      Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
   -maxConcurrentInserts int
-     The maximum number of concurrent insert requests. Default value should work for most cases, since it minimizes the memory usage. The default value can be increased when clients send data over slow networks. See also -insert.maxQueueDuration (default 8)
+     The maximum number of concurrent insert requests. The default value should work for most cases, since it minimizes memory usage. The default value can be increased when clients send data over slow networks. See also -insert.maxQueueDuration (default 8)
   -maxInsertRequestSize size
      The maximum size in bytes of a single Prometheus remote_write API request
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 33554432)
@@ -2368,10 +2368,10 @@ Pass `-help` to VictoriaMetrics in order to see the list of supported command-li
   -maxLabelsPerTimeseries int
      The maximum number of labels accepted per time series. Superfluous labels are dropped. In this case the vm_metrics_with_dropped_labels_total metric at /metrics page is incremented (default 30)
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -opentsdbHTTPListenAddr string

docs/VictoriaLogs/README.md

@@ -135,9 +135,9 @@ Pass `-help` to VictoriaLogs in order to see the list of supported command-line
   -cacheExpireDuration duration
     	Items are removed from in-memory caches after they aren't accessed for this duration. Lower values may reduce memory usage at the cost of higher CPU usage. See also -prevCacheRemovalPercent (default 30m0s)
   -enableTCP6
-    	Whether to enable IPv6 for listening and dialling. By default, only IPv4 TCP and UDP are used
+    	Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-    	Whether to enable reading flags from environment variables in additionally to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+    	Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
     	Prefix for environment variables if -envflag.enable is set
   -flagsAuthKey string
@@ -146,7 +146,7 @@ Pass `-help` to VictoriaLogs in order to see the list of supported command-line
     	Whether to use pread() instead of mmap() for reading data files. By default, mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
   -futureRetention value
     	Log entries with timestamps bigger than now+futureRetention are rejected during data ingestion; see https://docs.victoriametrics.com/VictoriaLogs/#retention
-    	The following optional suffixes are supported: h (hour), d (day), w (week), y (year). If the suffix isn't set, then the duration is counted in months (default 2d)
+    	The following optional suffixes are supported: h (hour), d (day), w (week), y (year). If suffix isn't set, then the duration is counted in months (default 2d)
   -gogc int
     	GOGC to use. See https://tip.golang.org/doc/gc-guide (default 100)
   -http.connTimeout duration
@@ -170,7 +170,7 @@ Pass `-help` to VictoriaLogs in order to see the list of supported command-line
   -httpListenAddr.useProxyProtocol
     	Whether to use proxy protocol for connections accepted at -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
   -inmemoryDataFlushInterval duration
-    	The interval for guaranteed saving of in-memory data to disk. The saved data survives unclean shutdowns such as OOM crashes, hardware reset, SIGKILL, etc. Bigger intervals may help increase the lifetime of flash storage with limited write cycles (e.g. Raspberry PI). Smaller intervals increase disk IO load. Minimum supported value is 1s (default 5s)
+    	The interval for guaranteed saving of in-memory data to disk. The saved data survives unclean shutdowns such as OOM crash, hardware reset, SIGKILL, etc. Bigger intervals may help increase the lifetime of flash storage with limited write cycles (e.g. Raspberry PI). Smaller intervals increase disk IO load. Minimum supported value is 1s (default 5s)
   -insert.maxLineSizeBytes size
     	The maximum size of a single line, which can be read by /insert/* handlers
     	Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 262144)
@@ -205,7 +205,7 @@ Pass `-help` to VictoriaLogs in order to see the list of supported command-line
   -maxConcurrentInserts int
     	The maximum number of concurrent insert requests. The default value should work for most cases, since it minimizes memory usage. The default value can be increased when clients send data over slow networks. See also -insert.maxQueueDuration (default 12)
   -memory.allowedBytes size
-    	Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+    	Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
     	Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
     	Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
@@ -225,7 +225,7 @@ Pass `-help` to VictoriaLogs in order to see the list of supported command-line
     	Supports an array of values separated by comma or specified via multiple flags.
   -retentionPeriod value
     	Log entries with timestamps older than now-retentionPeriod are automatically deleted; log entries with timestamps outside the retention are also rejected during data ingestion; the minimum supported retention is 1d (one day); see https://docs.victoriametrics.com/VictoriaLogs/#retention
-    	The following optional suffixes are supported: h (hour), d (day), w (week), y (year). If the suffix isn't set, then the duration is counted in months (default 7d)
+    	The following optional suffixes are supported: h (hour), d (day), w (week), y (year). If suffix isn't set, then the duration is counted in months (default 7d)
   -search.maxConcurrentRequests int
     	The maximum number of concurrent search requests. It shouldn't be high, since a single request can saturate all the CPU cores, while many concurrently executed requests may require high amounts of memory. See also -search.maxQueueDuration (default 6)
   -search.maxQueryDuration duration

docs/vmagent.md

@@ -1207,9 +1207,9 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
   -dryRun
      Whether to check config files without running vmagent. The following files are checked: -promscrape.config, -remoteWrite.relabelConfig, -remoteWrite.urlRelabelConfig, -remoteWrite.streamAggr.config . Unknown config entries aren't allowed in -promscrape.config by default. This can be changed by passing -promscrape.config.strictParse=false command-line flag
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -1274,7 +1274,7 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -kafka.consumer.topic array
      Kafka topic names for data consumption. This flag is available only in VictoriaMetrics enterprise. See https://docs.victoriametrics.com/enterprise.html
      Supports an array of values separated by comma or specified via multiple flags.
@@ -1321,15 +1321,15 @@ See the docs at https://docs.victoriametrics.com/vmagent.html .
   -loggerWarnsPerSecondLimit int
      Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
   -maxConcurrentInserts int
-     The maximum number of concurrent insert requests. Default value should work for most cases, since it minimizes the memory usage. The default value can be increased when clients send data over slow networks. See also -insert.maxQueueDuration (default 8)
+     The maximum number of concurrent insert requests. The default value should work for most cases, since it minimizes memory usage. The default value can be increased when clients send data over slow networks. See also -insert.maxQueueDuration (default 8)
   -maxInsertRequestSize size
      The maximum size in bytes of a single Prometheus remote_write API request
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 33554432)
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -opentsdbHTTPListenAddr string

docs/vmalert.md

@@ -978,9 +978,9 @@ The shortlist of configuration flags is the following:
   -dryRun
      Whether to check only config files without running vmalert. The rules file are validated. The -rule flag must be specified.
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -1023,7 +1023,7 @@ The shortlist of configuration flags is the following:
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -loggerDisableTimestamps
      Whether to disable writing timestamps in logs
   -loggerErrorsPerSecondLimit int
@@ -1041,10 +1041,10 @@ The shortlist of configuration flags is the following:
   -loggerWarnsPerSecondLimit int
      Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -notifier.basicAuth.password array

docs/vmauth.md

@@ -355,9 +355,9 @@ See the docs at https://docs.victoriametrics.com/vmauth.html .
   -configCheckInterval duration
      interval for config file re-read. Zero value disables config re-reading. By default, refreshing is disabled, send SIGHUP for config refresh.
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -391,7 +391,7 @@ See the docs at https://docs.victoriametrics.com/vmauth.html .
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -logInvalidAuthTokens
      Whether to log requests with invalid auth tokens. Such requests are always counted at vmauth_http_request_errors_total{reason="invalid_auth_token"} metric, which is exposed at /metrics page
   -loggerDisableTimestamps
@@ -417,10 +417,10 @@ See the docs at https://docs.victoriametrics.com/vmauth.html .
   -maxIdleConnsPerBackend int
      The maximum number of idle connections vmauth can open per each backend host. See also -maxConcurrentRequests (default 100)
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -pprofAuthKey string

docs/vmbackup.md

@@ -201,9 +201,9 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
      Where to put the backup on the remote storage. Example: gs://bucket/path/to/backup, s3://bucket/path/to/backup, azblob://container/path/to/backup or fs:///path/to/local/backup/dir
      -dst can point to the previous backup. In this case incremental backup is performed, i.e. only changed data is uploaded
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -235,7 +235,7 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -loggerDisableTimestamps
      Whether to disable writing timestamps in logs
   -loggerErrorsPerSecondLimit int
@@ -256,10 +256,10 @@ See [this article](https://medium.com/@valyala/speeding-up-backups-for-big-time-
      The maximum upload speed. There is no limit if it is set to 0
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -origin string

docs/vmbackupmanager.md

@@ -434,9 +434,9 @@ command-line flags:
   -dst string
      The root folder of Victoria Metrics backups. Example: gs://bucket/path/to/backup/dir, s3://bucket/path/to/backup/dir or fs:///path/to/local/backup/dir
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -468,7 +468,7 @@ command-line flags:
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -keepLastDaily int
      Keep last N daily backups. If 0 is specified next retention cycle removes all backups for given time period. (default -1)
   -keepLastHourly int
@@ -496,10 +496,10 @@ command-line flags:
   -maxBytesPerSecond int
      The maximum upload speed. There is no limit if it is set to 0
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -pprofAuthKey string

docs/vmgateway.md

@@ -343,9 +343,9 @@ The shortlist of configuration flags include the following:
   -enable.rateLimit
      enables rate limiter
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -379,7 +379,7 @@ The shortlist of configuration flags include the following:
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -loggerDisableTimestamps
      Whether to disable writing timestamps in logs
   -loggerErrorsPerSecondLimit int
@@ -397,10 +397,10 @@ The shortlist of configuration flags include the following:
   -loggerWarnsPerSecondLimit int
      Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -pprofAuthKey string

docs/vmrestore.md

@@ -105,9 +105,9 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
   -customS3Endpoint string
      Custom S3 endpoint for use with S3-compatible storages (e.g. MinIO). S3 is used if not set
   -enableTCP6
-     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used
+     Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
   -envflag.enable
-     Whether to enable reading flags from environment variables additionally to command line. Command line flag values have priority over values from environment vars. Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
+     Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details
   -envflag.prefix string
      Prefix for environment variables if -envflag.enable is set
   -eula
@@ -139,7 +139,7 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
   -internStringDisableCache
      Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
   -internStringMaxLen int
-     The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
+     The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
   -loggerDisableTimestamps
      Whether to disable writing timestamps in logs
   -loggerErrorsPerSecondLimit int
@@ -160,10 +160,10 @@ i.e. the end result would be similar to [rsync --delete](https://askubuntu.com/q
      The maximum download speed. There is no limit if it is set to 0
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedBytes size
-     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage
+     Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage
      Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
   -memory.allowedPercent float
-     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage (default 60)
+     Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
   -metricsAuthKey string
      Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings
   -pprofAuthKey string

lib/bytesutil/internstring.go

@@ -11,7 +11,7 @@ import (
 )
 
 var (
-	internStringMaxLen = flag.Int("internStringMaxLen", 500, "The maximum length for strings to intern. Lower limit may save memory at the cost of higher CPU usage. "+
+	internStringMaxLen = flag.Int("internStringMaxLen", 500, "The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. "+
 		"See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration")
 	disableCache = flag.Bool("internStringDisableCache", false, "Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. "+
 		"See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen")

lib/envflag/envflag.go

@@ -10,9 +10,9 @@ import (
 )
 
 var (
-	enable = flag.Bool("envflag.enable", false, "Whether to enable reading flags from environment variables additionally to command line. "+
+	enable = flag.Bool("envflag.enable", false, "Whether to enable reading flags from environment variables in addition to the command line. "+
 		"Command line flag values have priority over values from environment vars. "+
-		"Flags are read only from command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details")
+		"Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/#environment-variables for more details")
 	prefix = flag.String("envflag.prefix", "", "Prefix for environment variables if -envflag.enable is set")
 )
 

lib/memory/memory.go

@@ -11,8 +11,8 @@ import (
 )
 
 var (
-	allowedPercent = flag.Float64("memory.allowedPercent", 60, `Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache which will result in higher disk IO usage`)
-	allowedBytes   = flagutil.NewBytes("memory.allowedBytes", 0, `Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from OS page cache resulting in higher disk IO usage`)
+	allowedPercent = flag.Float64("memory.allowedPercent", 60, `Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage`)
+	allowedBytes   = flagutil.NewBytes("memory.allowedBytes", 0, `Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage`)
 )
 
 var _ = metrics.NewGauge("process_memory_limit_bytes", func() float64 {

lib/netutil/tcplistener.go

@@ -13,7 +13,7 @@ import (
 	"github.com/VictoriaMetrics/metrics"
 )
 
-var enableTCP6 = flag.Bool("enableTCP6", false, "Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP is used")
+var enableTCP6 = flag.Bool("enableTCP6", false, "Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used")
 
 // NewTCPListener returns new TCP listener for the given addr and optional tlsConfig.
 //