app/vmagent: add remoteWrite.retryMinInterval and remoteWrite.retryMaxTime flags (#6289)

## Describe Your Changes

Add RemoteWrite Retry Controls

This PR introduces two new flags to the remote write functionality:
- remoteWrite.retryMinInterval
- remoteWrite.retryMaxTime
 
These flags provide finer control over the retry behavior for
remoteWrite operations, allowing users to customize the minimum interval
between retries and the maximum duration for retry attempts.

Fixes #5486.

## Checklist

- [x] The following checks are mandatory:

My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).

---------

Signed-off-by: Yury Akudovich <ya@matterlabs.dev>
Co-authored-by: hagen1778 <roman@victoriametrics.com>

app/vmagent/remotewrite/client.go

@@ -35,6 +35,8 @@ var (
 		"By default, the rate limit is disabled. It can be useful for limiting load on remote storage when big amounts of buffered data "+
 		"is sent after temporary unavailability of the remote storage. See also -maxIngestionRate")
 	sendTimeout      = flagutil.NewArrayDuration("remoteWrite.sendTimeout", time.Minute, "Timeout for sending a single block of data to the corresponding -remoteWrite.url")
+	retryMinInterval = flagutil.NewArrayDuration("remoteWrite.retryMinInterval", time.Second, "The minimum delay between retry attempts to send a block of data to the corresponding -remoteWrite.url. Every next retry attempt will double the delay to prevent hammering of remote database. See also -remoteWrite.retryMaxInterval")
+	retryMaxTime     = flagutil.NewArrayDuration("remoteWrite.retryMaxTime", time.Minute, "The max time spent on retry attempts to send a block of data to the corresponding -remoteWrite.url. Change this value if it is expected for -remoteWrite.url to be unreachable for more than -remoteWrite.retryMaxTime. See also -remoteWrite.retryMinInterval")
 	proxyURL         = flagutil.NewArrayString("remoteWrite.proxyURL", "Optional proxy URL for writing data to the corresponding -remoteWrite.url. "+
 		"Supported proxies: http, https, socks5. Example: -remoteWrite.proxyURL=socks5://proxy:1234")
 
@@ -90,6 +92,9 @@ type client struct {
 	fq *persistentqueue.FastQueue
 	hc *http.Client
 
+	retryMinInterval time.Duration
+	retryMaxTime     time.Duration
+
 	sendBlock func(block []byte) bool
 	authCfg   *promauth.Config
 	awsCfg    *awsapi.Config
@@ -149,6 +154,8 @@ func newHTTPClient(argIdx int, remoteWriteURL, sanitizedURL string, fq *persiste
 		awsCfg:           awsCfg,
 		fq:               fq,
 		hc:               hc,
+		retryMinInterval: retryMinInterval.GetOptionalArg(argIdx),
+		retryMaxTime:     retryMaxTime.GetOptionalArg(argIdx),
 		stopCh:           make(chan struct{}),
 	}
 	c.sendBlock = c.sendBlockHTTP
@@ -396,11 +403,11 @@ func (c *client) newRequest(url string, body []byte) (*http.Request, error) {
 // sendBlockHTTP sends the given block to c.remoteWriteURL.
 //
 // The function returns false only if c.stopCh is closed.
-// Otherwise it tries sending the block to remote storage indefinitely.
+// Otherwise, it tries sending the block to remote storage indefinitely.
 func (c *client) sendBlockHTTP(block []byte) bool {
 	c.rl.Register(len(block))
-	maxRetryDuration := timeutil.AddJitterToDuration(time.Minute)
-	retryDuration := timeutil.AddJitterToDuration(time.Second)
+	maxRetryDuration := timeutil.AddJitterToDuration(c.retryMaxTime)
+	retryDuration := timeutil.AddJitterToDuration(c.retryMinInterval)
 	retriesCount := 0
 
 again:

docs/changelog/CHANGELOG.md

@@ -28,6 +28,7 @@ The value of `instance` label for those scrape targets will be changed from `<ad
 * FEATURE: [vmagent](https://docs.victoriametrics.com/vmagent/): allow overriding the `sample_limit` option at [scrape_configs](https://docs.victoriametrics.com/sd_configs/#scrape_configs) when a label `__sample_limit__` is specified for target. See [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6665). Thanks to @zoglam for the [pull request](https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6666).
 * FEATURE: [vmagent](https://docs.victoriametrics.com/vmagent/): reduce memory usage when scraping targets with big response body. See [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6759).
 * FEATURE: [vmagent](https://docs.victoriametrics.com/vmagent/) and [Single-node VictoriaMetrics](https://docs.victoriametrics.com/): stop adding default port 80/443 for scrape URLs without a port. See [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6792).
+* FEATURE: [vmagent](https://docs.victoriametrics.com/vmagent.html): add flags `-remoteWrite.retryMinInterval` and `-remoteWrite.retryMaxTime` for adjusting remote-write requests retry policy. See [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5486). Thanks to @yorik for the [pull request](https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6289).
 * FEATURE: [vmalert](https://docs.victoriametrics.com/vmalert/): add command-line flag `-notifier.headers` to allow configuring additional headers for all requests sent to the corresponding `-notifier.url`.
 * FEATURE: [vmalert-tool](https://docs.victoriametrics.com/vmalert-tool/): add `-external.label` and `-external.url` command-line flags, in the same way as these flags are supported by vmalert. See [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6735).
 * FEATURE: [vmbackup](https://docs.victoriametrics.com/vmbackup/), [vmrestore](https://docs.victoriametrics.com/vmrestore/), [vmbackupmanager](https://docs.victoriametrics.com/vmbackupmanager/): use exponential backoff for retries when uploading or downloading data from S3. This should reduce the number of failed uploads and downloads when S3 is temporarily unavailable. See [this issue](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6732).

docs/vmagent.md

@@ -2168,6 +2168,14 @@ See the docs at https://docs.victoriametrics.com/vmagent/ .
      Empty values are set to default value.
   -remoteWrite.relabelConfig string
      Optional path to file with relabeling configs, which are applied to all the metrics before sending them to -remoteWrite.url. See also -remoteWrite.urlRelabelConfig. The path can point either to local file or to http url. See https://docs.victoriametrics.com/vmagent/#relabeling
+  -remoteWrite.retryMaxTime array
+     The max time spent on retry attempts to send a block of data to the corresponding -remoteWrite.url. Change this value if it is expected for -remoteWrite.url to be unreachable for more than -remoteWrite.retryMaxTime. See also -remoteWrite.retryMinInterval (default 1m0s)
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to default value.
+  -remoteWrite.retryMinInterval array
+     The minimum delay between retry attempts to send a block of data to the corresponding -remoteWrite.url. Every next retry attempt will double the delay to prevent hammering of remote database. See also -remoteWrite.retryMaxInterval (default 1s)
+     Supports array of values separated by comma or specified via multiple flags.
+     Empty values are set to default value.
   -remoteWrite.roundDigits array
      Round metric values to this number of decimal digits after the point before writing them to remote storage. Examples: -remoteWrite.roundDigits=2 would round 1.236 to 1.24, while -remoteWrite.roundDigits=-1 would round 126.78 to 130. By default, digits rounding is disabled. Set it to 100 for disabling it for a particular remote storage. This option may be used for improving data compression for the stored metrics (default 100)
      Supports array of values separated by comma or specified via multiple flags.