vmauth uses 'lib/httpserver' for serving HTTP requests. This server
unconditionally defines built-in routes (such as '/metrics',
'/health', etc). It makes impossible to proxy `HTTP` requests to backends with the same routes.
Since vmauth's httpserver matches built-in route and return local
response.
This commit adds new flag `httpInternalListenAddr` with
default empty value. Which removes internal API routes from public
router and exposes it at separate http server.
For example given configuration disables private routes at `0.0.0.0:8427` address and serves it at `0.0.0.0:8426`:
`./bin/vmauth --auth.config=config.yaml --httpListenAddr=:8427 --httpInternalListenAddr=127.0.0.1:8426`
Related issues:
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6468
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7345
Sync.Pool for readTrackingBody was added in order to reduce potential
load on garbage collector. But golang net/http standard library does not
allow to reuse request body, since it closes body asynchronously after
return. Related issue: https://github.com/golang/go/issues/51907
This commit removes sync.Pool in order to fix potential panic and data
race at requests processing.
Affected releases:
- all releases after v1.97.7
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/8051
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
### Describe Your Changes
optimize for
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6226
for user who set `*AuthKey` flag, they will receive new response in
body:
```go
// query arg not set
The provided authKey '' doesn't match -search.resetCacheAuthKey
// incorrect query arg
The provided authKey '5dxd71hsz==' doesn't match -search.resetCacheAuthKey
```
previously, they receive:
```
The provided authKey doesn't match -search.resetCacheAuthKey
```
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
Fixes error in `vmauth` when discovering ipv6 addresses.
`vmauth` attempts to [slice till
`:`](https://github.com/VictoriaMetrics/VictoriaMetrics/blob/master/app/vmauth/auth_config.go#L397)
in the discovered addresses without accounting for ipv6. This causes it
to fail in ipv6 only environments.
```sh
$ nslookup vmselect.ns.svc.cluster.local
...
Name: vmselect.ns.svc.cluster.local
Address: 2600:dead:beef:dead:beef::8
```
```sh
$ kubectl logs -f vmauth
...
error: dial tcp: lookup 2600: no such host
```
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: f41gh7 <nik@victoriametrics.com>
vmauth started to use request.Host after commit
f4776fec1b for`src_hosts` routing rules.
This commit adds http.Request.Host to the debugInfo output in order to
be consistent with routing logic.
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
This commit adds ability to launch vmauth without configuration file.
Which is possible use case for operator based installations.
Operator provides global resource `VMAuth` and allows to create
`VMUser` objects for it. Eventually operator creates configuration for
`VMAuth` based on user defined selectors for `VMUser`.
Since there is no direct relations between
those objects. And any object could be created in on-demand by
Kubernetes users. It's required to be able to start `vmauth` with empty
auth config file.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6467
Requests processed by built-in HTTP server has the [origin
form](https://datatracker.ietf.org/doc/html/rfc7230#section-5.3) rather
than the absolute form.
So in[Request.URL](https://pkg.go.dev/net/http#Request), fields other than
Path and RawQuery will be empty.
> // For server requests, the URL is parsed from the URI
> // supplied on the Request-Line as stored in RequestURI. For
> // most requests, fields other than Path and RawQuery will be
> // empty. (See RFC 7230, Section 5.3)
Using `request.Host` field instead to match `src_hosts` fixes issue and allows to route requests properly.
An addition It allows user to route requests with customized `Host` header.
Previously, there was no option to replace value of `X-Forwarded-For`
HTTP Header. It was only possible to completely remove it. It's not good
solution, since backend may require this information. But using direct
value of this header is insecure. And requires complex knowledge of
infrastruce at backend side (see spoofing X-Forwarded-For articles).
This commit adds new flag, that replaces content of `X-Forwarded-For`
HTTP Header value with current `RemoteAddress` of client that send
request.
It should be used if `vmauth` is directly attached to the internet.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6883
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Additional info from the dump can be used to debug rotuing rules.
https://pkg.go.dev/net/http/httputil#DumpRequest
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This commit makes vmauth respect the routing config for unauthorized
requests for requests that despite having Authorization header failed to
authorize successfully.
It covers the following use-cases:
- vmauth is used at load-balanacer and must forward requests as is. There is no any authorization configs.
- vmauth has authorization config, but it must forward requests with invalid credential tokens to some other backend.
related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7543
---------
Signed-off-by: Andrii <andriibeee@gmail.com>
The following user-level options must be unconditionally inherited by url_map, since this is what most users expect:
- retry_status_codes
- load_balancing_policy
- drop_src_path_prefix_parts
- discover_backend_ips
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7519
The fix at a0a154511a looks too complicated and fragile:
- It moves buMin initialization to the place, which is far from its usage.
- It embeds unclear logic on selecting the proper buMin if it is broken,
into unrelated loop.
The actual fix must be more clear:
$ git diff 95acca6b52 -- app/vmauth/
- if n := bu.concurrentRequests.Load(); n < minRequests {
+ if n := bu.concurrentRequests.Load(); n < minRequests || buMin.isBroken() {
This should simplify further maintenance of this code.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/7489
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3061
Previously, vmauth could have pick `buMin` as least loaded backend
without checking its status. In result, vmauth could have respond to the
user with an error even if there were healthy backends. That could
happen if healthy backends already had non-zero amount of concurrent
requests executing at the moment of least-loaded backend choosing logic.
Steps to reproduce:
1. Setup vmauth with two backends: healthy and non-healthy
2. Execute a bunch of concurrent requests against vmauth (i.e. Grafana
dash reload)
3. Observe that some requests will fail with message that all backends
are unavailable
Addresses https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3061
---
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Recent versions of `docker build` started generating the InvalidDefaultArgInFrom warning if Dockerfile contains
an ARG without default value. While this warning doesn't affect building Docker packages via `make package-*` commands,
it is better suppressing the warning, so it doesn't clutter `make package-*` output with the noise,
which can hide real issues in the future.
### Describe Your Changes
Change response code to 502 to align it with behaviour of other existing
reverse proxies. Currently, the following reverse proxies will return
502 in case an upstream is not available: nginx, traefik, caddy, apache.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
- Rename overrideHostHeader() function to hasEmptyHostHeader()
- Rename overrideHostHeader field at UserInfo to useBackendHostHeader
This should simplify the future maintenance of the code
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6525
This reverts commit 4d66e042e3.
Reasons for revert:
- The commit makes unrelated invalid changes to docs/CHANGELOG.md
- The changes at app/vmauth/main.go are too complex. It is better splitting them into two parts:
- pooling readTrackingBody struct for reducing pressure on GC
- avoiding to use readTrackingBody when -maxRequestBodySizeToRetry command-line flag is set to 0
Let's make this in the follow-up commits!
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6445
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6533
- Move the test for SRV discovery into a separate function. This allows verifying round-robin discovery across SRV records.
- Restore the original netutil.Resolver after the test finishes, so it doesn't interfere with other tests.
- Move the description of the bugfix into the correct place at docs/CHANGELOG.md - it should be placed under v1.102.0-rc2
instead of v1.102.0-rc1.
- Remove unneeded code in URLPrefix.sanitizeAndInitialize(), since it is expected this function is called only once
for finishing URLPrefix initializiation. In this case URLPrefix.nextDiscoveryDeadline and URLPrefix.n are equal to 0
according to https://pkg.go.dev/sync/atomic#Uint64
- Properly fix the bug at URLPrefix.discoverBackendAddrsIfNeeded() - it is expected that hostToAddrs map uses
the original hostname keys, including 'srv+' prefix, so it shouldn't be removed when looping over up.busOriginal.
Instead, the 'srv+' prefix must be removed from the hostname only locally before passing the hostname to netutil.Resolver.LookupSRV.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6401
- Rename GetStatDialFunc to NewStatDialFunc, since it returns new function with every call
- NewStatDialFunc isn't related to http in any way, so it must be moved from lib/httputils to lib/netutil
- Simplify the implementation of NewStatDialFunc by removing sync.Map from there.
- Use netutil.NewStatDialFunc at app/vmauth and lib/promscrape/discoveryutils
- Use gauge instead of counter type for *_conns metric
This is a follow-up for d7b5062917
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6299
'any' type is supported starting from Go1.18. Let's consistently use it
instead of 'interface{}' type across the code base, since `any` is easier to read than 'interface{}'.
### Describe Your Changes
Fixes#6453
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
This change fixes the following panic:
```
2024-06-04T11:16:52.899Z warn app/vmauth/auth_config.go:353 cannot discover backend SRV records for http://srv+localhost:8080: lookup localhost on 10.100.10.4:53: server misbehaving; use it literally
panic: runtime error: integer divide by zero
goroutine 9 [running]:
github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver.handlerWrapper.func1()
/Users/lhhdz/wd/projects/go/VictoriaMetrics/lib/httpserver/httpserver.go:291 +0x58
panic({0x103115100?, 0x10338d700?})
/Users/lhhdz/go/pkg/mod/golang.org/toolchain@v0.0.1-go1.22.3.darwin-arm64/src/runtime/panic.go:770 +0x124
main.getLeastLoadedBackendURL({0x0?, 0x22?, 0x1400014757b?}, 0x1400013c120?)
/Users/lhhdz/wd/projects/go/VictoriaMetrics/app/vmauth/auth_config.go:473 +0x210
main.(*URLPrefix).getBackendURL(0x140000aa080)
/Users/lhhdz/wd/projects/go/VictoriaMetrics/app/vmauth/auth_config.go:312 +0xb8
```
---------
Co-authored-by: Haley Wang <haley@victoriametrics.com>
* adds idleConnTimeout flag, which must reduce probability of `broken
pipe` and `connection reset` errors.
* one-time retry trivial network requests for the same backend
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
it's needed to remove Summary metric type from the global state of
metrics package. metrics package tracks each bucket of summary and
periodically swaps old buckets with new.
Simple set unregister is not enough to release memory used by Set
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6247
### Describe Your Changes
Added makefile rule for `GOARCH=loong64` to support building all
VictoriaMetrics components on the `loongarch64` platform.
### Checklist
The following checks are **mandatory**:
* [X] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: qiangxuhui <qiangxuhui@loongson.cn>
