This commit makes configurable interval for checking if final dedup
process for the historical data should be started. It allows to spread
resource utilisation for multiple vmstorage/vmsingle instances in time.
Since final dedup may add additional preasure on disk, backup systems
and make cluster less stable. Storage unconditionally adds 25% jitter to
the provided value, it should simplify configuration management at
Kubernetes ecosystem. Because Kubernetes application pods must have the
same configuration.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7880
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Historically some of VictoriaMetrics components were optimized for the low rate of memory allocations.
These are: vmagent, single-node VictoriaMetrics and vmstorage. These components benefit from the low
GOGC value, since this allow reducing their memory usage in steady state on typical workloads.
Other VictoriaMetrics components aren't optimized for the reduced rate of memory allocations.
This results in the increased CPU usage spent on garbage collection (GC) in these components,
since it must be triggered at higher rate. See https://tip.golang.org/doc/gc-guide#GOGC for details.
These components do not use too much memory, so it is OK increasing the GOGC for these components
from 30 to 100 - this won't affect the most users.
Keep GOGC to 30 only for vmagent, single-node VictoriaMetrics and vmstorage components.
See 077193d87c and 54b9e1d3cb .
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7902
Previously, time series with labels exceeding the configured limits were truncated and written to storage, potentially causing data inconsistency. This could lead to collisions between time series and make it difficult to identify the source due to truncated labels.
This commit changes the behavior:
* Such time series are now rejected outright.
* Rejected time series are logged to stdout, and corresponding counters are incremented.
* removes `vm_too_long_label_values_total`, `vm_too_long_label_names_total`, `vm_metrics_with_dropped_labels_total` metrics.
* adds new values `[too_many_labels,too_long_label_name,too_long_label_value]` to `reason` label of the `vm_rows_ignored_total` metric name
related issues:
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6928
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7661
### Describe Your Changes
doing similar changes for both vmagent and vminsert (like one in
https://github.com/VictoriaMetrics/VictoriaMetrics/pull/7399) ends up
with almost same implementations for each of packages instead of having
this shared code in one place. one of the reasons is the same Timeseries
and Labels structure from different prompb and prompbmarshal packages.
My proposal is to use structures from prompb package only to
marshal/unmarshal sent/received data, but for internal transformations
use only structures from prompbmarshal package
Another example, where it already can help to simplify code is streaming
aggregation pipeline for vmsingle (now it first marshals
prompb.Timeseries to storage.MetricRow and then if streaming aggregation
or deduplication is enabled it unmarshals all the series back but to
prompbmarshal.Timeseries)
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
This commit fixes flaky test TestWriteRead/read/graphite/subquery-aggregation in app/victoria-metrics/main_test.go
The test fails when the test execution falls on the first second of a minute,
for example 6:59:00. In all other cases (such as 6:59:01) the test passes.
The test fails because of the way VictoriaMetrics implements sub-queries: it
aligns the time range to the step. The test config does not account for this.
Assuming that the implementation is correct, the fix is to adjust the test
config so that the data is inserted at intervals other than 1m.
Signed-off-by: Artem Fetishev <rtm@victoriametrics.com>
Recent versions of `docker build` started generating the InvalidDefaultArgInFrom warning if Dockerfile contains
an ARG without default value. While this warning doesn't affect building Docker packages via `make package-*` commands,
it is better suppressing the warning, so it doesn't clutter `make package-*` output with the noise,
which can hide real issues in the future.
Consistently using t.Fatal* simplifies the test code and makes it less fragile, since it is common error
to forget to make proper cleanup after t.Error* call. Also t.Error* calls do not provide any practical
benefits when some tests fail. They just clutter test output with additional noise information,
which do not help in fixing failing tests most of the time.
While at it, improve errors generated at app/victoria-metrics tests, so they contain more useful information
when debugging failed tests.
This is a follow-up for a9525da8a4
'any' type is supported starting from Go1.18. Let's consistently use it
instead of 'interface{}' type across the code base, since `any` is easier to read than 'interface{}'.
### Describe Your Changes
Added makefile rule for `GOARCH=loong64` to support building all
VictoriaMetrics components on the `loongarch64` platform.
### Checklist
The following checks are **mandatory**:
* [X] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: qiangxuhui <qiangxuhui@loongson.cn>
* app/vmselect: adds milliseconds to the csv export response for rfc3339
* milliseconds is a standard prescion for VictoriaMetrics query request responses
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5837
* app/victoria-metrics: adds tests for csv export/import
follow-up after 3541a8d0cf96dd4f8563624c4aab6816615d0756
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
Instead, log a sample of these long items once per 5 seconds into error log,
so users could notice and fix the issue with too long labels or too many labels.
Previously this panic could occur in production when ingesting samples with too long labels.
Properly determine time range search for instant queries with too big look-behind window like `foo[100y]`.
Previously, such queries could return empty responses even if `foo` is present in database.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5553
Signed-off-by: hagen1778 <roman@victoriametrics.com>
app/victoriametrics: update the test suite
* simplify /query and /query_range test cases configuration and tests
* support instant queries with lookbehind window like `query=foo[5m]`
* support instant queries selecting scalar value like `query=42`
* add query_range test for prometheus
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Make sure that the last successfully loaded config is used on hot-reload failure
- Properly cleanup resources occupied by already initialized aggregators
when the current aggregator fails to be initialized
- Expose distinct vmagent_streamaggr_config_reload* metrics per each -remoteWrite.streamAggr.config
This should simplify monitoring and debugging failed reloads
- Remove race condition at app/vminsert/common.MustStopStreamAggr when calling sa.MustStop() while sa
could be in use at realoadSaConfig()
- Remove lib/streamaggr.aggregator.hasState global variable, since it may negatively impact scalability
on system with big number of CPU cores at hasState.Store(true) call inside aggregator.Push().
- Remove fine-grained aggregator reload - reload all the aggregators on config change instead.
This simplifies the code a bit. The fine-grained aggregator reload may be returned back
if there will be demand from real users for it.
- Check -relabelConfig and -streamAggr.config files when single-node VictoriaMetrics runs with -dryRun flag
- Return back accidentally removed changelog for v1.87.4 at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3639
This commit changes background merge algorithm, so it becomes compatible with Windows file semantics.
The previous algorithm for background merge:
1. Merge source parts into a destination part inside tmp directory.
2. Create a file in txn directory with instructions on how to atomically
swap source parts with the destination part.
3. Perform instructions from the file.
4. Delete the file with instructions.
This algorithm guarantees that either source parts or destination part
is visible in the partition after unclean shutdown at any step above,
since the remaining files with instructions is replayed on the next restart,
after that the remaining contents of the tmp directory is deleted.
Unfortunately this algorithm doesn't work under Windows because
it disallows removing and moving files, which are in use.
So the new algorithm for background merge has been implemented:
1. Merge source parts into a destination part inside the partition directory itself.
E.g. now the partition directory may contain both complete and incomplete parts.
2. Atomically update the parts.json file with the new list of parts after the merge,
e.g. remove the source parts from the list and add the destination part to the list
before storing it to parts.json file.
3. Remove the source parts from disk when they are no longer used.
This algorithm guarantees that either source parts or destination part
is visible in the partition after unclean shutdown at any step above,
since incomplete partitions from step 1 or old source parts from step 3 are removed
on the next startup by inspecting parts.json file.
This algorithm should work under Windows, since it doesn't remove or move files in use.
This algorithm has also the following benefits:
- It should work better for NFS.
- It fits object storage semantics.
The new algorithm changes data storage format, so it is impossible to downgrade
to the previous versions of VictoriaMetrics after upgrading to this algorithm.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3236
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3821
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70
- Sync the description for -httpListenAddr.useProxyProtocol command-line flag at vmagent and vmauth,
so it is consistent with the description at vmauth and victoria-metrics
- Add a sample of panic text to docs/CHANGELOG.md, so it could be googled
- Mention the -httpListenAddr.useProxyProtocol command-line flag in the description for the bugfix
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3335
