### Describe Your Changes
Added saving column settings in the URL for the table view. See #7662
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
This commit fixes incorrect behaviour when pressing `Enter` did not execute the query, and
`Shift+Enter` did not insert a new line.
- The issue occurred when autocomplete was disabled.
- This problem affected the query editor in both the VictoriaMetrics UI
and VictoriaLogs UI.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/8058
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/8072
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Also always initialize Query.timestamp with the timestamp from the lexer.
This should avoid potential problems with relative timestamps inside inner queries.
For example, the `_time:1h` filter in the following query is correctly executed
relative to the current timestamp:
foo:in(_time:1h | keep foo)
Sync.Pool for readTrackingBody was added in order to reduce potential
load on garbage collector. But golang net/http standard library does not
allow to reuse request body, since it closes body asynchronously after
return. Related issue: https://github.com/golang/go/issues/51907
This commit removes sync.Pool in order to fix potential panic and data
race at requests processing.
Affected releases:
- all releases after v1.97.7
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/8051
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
### Describe Your Changes
optimize for
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6226
for user who set `*AuthKey` flag, they will receive new response in
body:
```go
// query arg not set
The provided authKey '' doesn't match -search.resetCacheAuthKey
// incorrect query arg
The provided authKey '5dxd71hsz==' doesn't match -search.resetCacheAuthKey
```
previously, they receive:
```
The provided authKey doesn't match -search.resetCacheAuthKey
```
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
`doInternal` has adaptive staleness detection mechanism. It is
calculated using timestamp distance between samples in selected list of
samples. It is dynamic because VM can store signals from many sources
with different samples resolution. And while it works for most of cases,
there are edge cases for rollup functions that are comparing values
between windows: increase, increase_pure, delta.
The edge case 1.
There was a gap between series because of the missed scrape or two. In
this case staleness will trigger and increase-like functions will assume
the value they need to compare with is 0. In result, this could produce
spikes for a flappy data - see
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/894 This
problem was solved by introducing a `realPrevValue` field -
1f19c167a4.
It stores the closest real sample value on selected interval and is used
for comparison when samples start after the gap.
The edge case 2.
`realPrevValue` doesn't respect staleness interval. In result, even if
gap between samples is huge (hours), the increase-like functions will
not consider it as a new series that started from 0. See
https://github.com/VictoriaMetrics/VictoriaMetrics/pull/8002.
Covering both edge cases is tricky, because `realPrevValue` has to
respect and not respect the staleness interval in the same time. In
other words, it should be able to ignore periodic missing gaps, but
reset if the gap is too big. While "too big gap" can't be figured out
empirically, I suggest using `-search.maxStalenessInterval` for this
purpose. If `-search.maxStalenessInterval` is set to 0 (default), then
`realPrevValue` ignores staleness interval. If
`-search.maxStalenessInterval` is > 0, then `realPrevValue` respects it
as a staleness interval.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
New version has additional checks and reduced resource consumption, so
it doesn't timeout for our internal repos.
To make linter happy, I addressed "redefinition of the built-in
function" lint error.
----
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Previously columns with negative int64 values were stored either as float64 or string
depending on whether the negative int64 values are bigger or smaller than -2^53.
If the integer values are smaller than -2^53, then they are stored as string, since float64 cannot
hold such values without precision loss. Now such values are stored as int64.
This should improve compression ratio and query performance over columns with negative int64 values.
1. Do not copy every line from LineReader.buf to LineReader.Line - just refer the line at LineReader.buf.
2. Do not copy the next found line to the beginning of LineReader.buf - just track the next line start index with LineReader.bufOffset.
This reduces memory copying when many lines are read into LineReader.buf by a single read() syscall.
When vmselect process a rollup function it fetches all the raw samples
on requested `start-end` interval of the query. It then loops through
the raw samples, picks the range of the samples based on provided `step`
interval and invokes a rollup function for each of the picked ranges of
samples.
During this processing, vmselect always populates the `realPrevValue`
field with the closest previous raw sample value before the picked range
of samples. This `realPrevValue` is used by rollup functions like
increase_pure or delta to decide whether the counter change happened or
not. For example, we get the counter value == 1. If we've seen this
counter before and its value was also 1 - then no change happened. If we
didn't see it before, then this counter should have started with value=0
and we need to account for `1-0=1` change. All this is required to deal
with situations when scrapes are missing or `step` is too small.
However, vmselect doesn't check how "old" is the `realPrevValue`. In
other words, it doesn't respect the staleness interval when picking it.
In result, depending on the `start` and `end` params, vmselect can use
`realPrevValue` which is a couple of hours old and is unlikely to be a
temporary scrape fail. In result, some increases can be incorrectly
ingnored by vmselect.
This change makes sure that vmselect doesn't populate `realPrevValue`
with samples that are older than staleness interval.
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ x ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
-------------------
To reproduce, create a dataset with one metric `foo` which has samples
with value=1 on interval of couple of hours and resolution 15s, and a
gap for an hour in the middle:
<img width="769" alt="image"
src="https://github.com/user-attachments/assets/a39b2740-b741-45f8-ad18-093b7c57c3b3"
/>
Then run `increase(foo[1m])` expression on this time range (disable
cache):
<img width="1472" alt="image"
src="https://github.com/user-attachments/assets/463cece1-f359-4c75-a96c-60092a31cab2"
/>
In result, there will be one increase on the beginning of the series.
And no increase after the gap. Then change the time range so it starts
in the middle of the gap:
<img width="1505" alt="image"
src="https://github.com/user-attachments/assets/f4a460c3-9fd1-4ec7-ab47-15e716ec1019"
/>
Now, there is an increase>0 because the `realPrevValue` wasn't
populated. This is wrong, because it hides the increase of the series.
With the fix, the original increase query on full time range should show
2 increases:
<img width="1492" alt="image"
src="https://github.com/user-attachments/assets/aa9d8a6b-7b22-41f6-9eb9-83b3113a6982"
/>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Hint allows to choose type of cache to be used for index search:
- in-memory parts are storing recently ingested samples and should use
main cache. This improves ingestion speed and cache hit ration for
queries accessing recently ingested samples.
- merges of file parts is performed in background, using a separate
cache allows avoiding pollution of the main cache with irrelevant
entries.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7182
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
This commit makes configurable interval for checking if final dedup
process for the historical data should be started. It allows to spread
resource utilisation for multiple vmstorage/vmsingle instances in time.
Since final dedup may add additional preasure on disk, backup systems
and make cluster less stable. Storage unconditionally adds 25% jitter to
the provided value, it should simplify configuration management at
Kubernetes ecosystem. Because Kubernetes application pods must have the
same configuration.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7880
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
commitL c7fc0d0d2f enabled skipping alerts
in case there is no labels present for an alert. This made clause which
was adding a comma for the JSON list incorrect as it is not possible to
determine if the next alert will be skipped or not.
This fix renders all alert labels in advance allowing properly format
JSON payload for Alertmanager notification.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7985
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
### Describe Your Changes
Fixes error in `vmauth` when discovering ipv6 addresses.
`vmauth` attempts to [slice till
`:`](https://github.com/VictoriaMetrics/VictoriaMetrics/blob/master/app/vmauth/auth_config.go#L397)
in the discovered addresses without accounting for ipv6. This causes it
to fail in ipv6 only environments.
```sh
$ nslookup vmselect.ns.svc.cluster.local
...
Name: vmselect.ns.svc.cluster.local
Address: 2600:dead:beef:dead:beef::8
```
```sh
$ kubectl logs -f vmauth
...
error: dial tcp: lookup 2600: no such host
```
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: f41gh7 <nik@victoriametrics.com>
### Describe Your Changes
This pull request adds support for autocomplete in LogsQL queries. The
new feature provides suggestions for field names, field values, and pipe
names as you type.
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
### Describe Your Changes
Binary operations like `exprFirst op exprSecond` in VictoriaMetrics are
performed in the following way:
1. Execute exprFirst.
2. Extract **common label filters** from the result of step 1.
3. Apply these common label filters to `exprSecond` and execute it, in
order to retrieve less time series from vmstorage nodes.
In step 2, only labels with less than `100` (hard-coded) value could be
used as **common label filter** (e.g. `{common_lb=~"v1|v2|...|v100"}`.
In our scenarios, a label, take `instance` label as an example, could
has thousands of candidate values. Regarding bring more pressure to
vmstorage node, it's still beneficial if labels with more than 100
values could be used as filter in `exprSecond`, with enough vmstorage
resources. After adjusting the value from `100` to `10000`, our query
round-trip time drops significantly from 5s to 2s.
This pull request change the hard-coded value into a configurable flag.
### Describe Your Changes
Parse cache is a pretty simple implementation of cache. It's just a
standard map with mutex.
Map with mutex overall has poor performance, plus when the cache
overflow occurs, the whole cache locks until 1k elements have been
deleted (now it's 10% of 10000 max elements in the cache). To avoid this
bottleneck and improve performance of cache on systems with many CPU
cores but keep it rather simple, we can implement cache with per bucket
locks like it's done in fastcache. The logic and API remain the same. So
now each bucket will have a map with approximately 78 elements (with 128
buckets), and overflow will occur now for each bucket, and only 7
elements need to be deleted.
Because exec_test.go has about 10k lines of code, it's better to move
the cache into a separate file to add tests and benchmarks for it,
because now it does not have them.
```
goos: windows
goarch: amd64
pkg: github.com/VictoriaMetrics/VictoriaMetrics/app/vmselect/promql
cpu: 11th Gen Intel(R) Core(TM) i9-11900K @ 3.50GHz
Current cache implementation performance on 8 cores:
BenchmarkCachePutNoOverFlow-8 1932 618372 ns/op 253 B/op 0 allocs/op
BenchmarkCacheGetNoOverflow-8 6547 211527 ns/op 0 B/op 0 allocs/op
BenchmarkCachePutGetNoOverflow-8 1873 621718 ns/op 261 B/op 0 allocs/op
BenchmarkCachePutOverflow-8 2262 464328 ns/op 32 B/op 0 allocs/op
BenchmarkCachePutGetOverflow-8 1764 655866 ns/op 38 B/op 0 allocs/op
New cache implementation performance on 8 cores:
BenchmarkCachePutNoOverFlow-8 10408 111412 ns/op 0 B/op 0 allocs/op
BenchmarkCacheGetNoOverflow-8 22407 52809 ns/op 0 B/op 0 allocs/op
BenchmarkCachePutGetNoOverflow-8 6583 168088 ns/op 0 B/op 0 allocs/op
BenchmarkCachePutOverflow-8 9822 117212 ns/op 2 B/op 0 allocs/op
BenchmarkCachePutGetOverflow-8 6481 175952 ns/op 3 B/op 0 allocs/op
Current cache implementation performance on 16 cores:
BenchmarkCachePutNoOverFlow-16 2331 475307 ns/op 218 B/op 0 allocs/op
BenchmarkCacheGetNoOverflow-16 6069 196905 ns/op 0 B/op 0 allocs/op
BenchmarkCachePutGetNoOverflow-16 1870 644236 ns/op 262 B/op 0 allocs/op
BenchmarkCachePutOverflow-16 2296 509279 ns/op 34 B/op 0 allocs/op
BenchmarkCachePutGetOverflow-16 1726 671510 ns/op 45 B/op 0 allocs/op
New cache implementation performance on 16 cores:
BenchmarkCachePutNoOverFlow-16 13549 82413 ns/op 0 B/op 0 allocs/op
BenchmarkCacheGetNoOverflow-16 30274 38997 ns/op 0 B/op 0 allocs/op
BenchmarkCachePutGetNoOverflow-16 8512 126239 ns/op 0 B/op 0 allocs/op
BenchmarkCachePutOverflow-16 13884 88124 ns/op 1 B/op 0 allocs/op
BenchmarkCachePutGetOverflow-16 7903 131299 ns/op 3 B/op 0 allocs/op
```
From the benchmarks above, we can see that the new implementation is ~5
times faster than the old one.
---------
Co-authored-by: f41gh7 <nik@victoriametrics.com>
Previously, since labels slice is reused for both `ALERTS` and
`ALERTS_FOR_STATE`, metrics might have incorrect labels and affect the
restore process. Tested the fix under `TestAlertingRule_Exec:
"for-pending=>empty"`.
The bug is introduced in
282f13cf11.
Affected versions: v1.106.1, v1.107...v1.108.x
related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7796
### Describe Your Changes
Previously, vmctl expect that tag must exist for each measurement, but
it's actually not necessary.
f16a58f14c/app/vmctl/influx/influx.go (L183-L186)
This pull request fix it by removing the check. For influx series
`measurement1_value1{}`, it will be represented as:
```go
Series{
Measurement: "measurement1",
Field: "value1",
LabelPairs: []LabelPair{},
EmptyTags: []string{},
}
```
and searched by the following query:
```sql
select "value1" from "measurement1"
```
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7921
Commit 71bb9fc0d0 introduced a regression.
If labels are empty and relabeling is not configured, influx ingestion hanlder
performed an earlier exit due to TryPrepareLabels call.
Due micro-optimisations for this procotol, this check was not valid.
Since it didn't take in account metircName, which added later and skip metrics line.
This commit removes `TryPrepareLabel` function call from this path and inline it instead.
It properly track empty labels path.
Adds initial tests implementation for data ingestion protocols.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7933
Signed-off-by: f41gh7 <nik@victoriametrics.com>
fixes https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7761
### Describe Your Changes
- datadog /api/v2/logs api supports message field in json format, which
is not documented and is used by serverless extension. This PR allows
message field to be both string and object type. Also added support of
not documented timestamp field
- added `-datadog.streamFields` and `-datadog.ignoreFields` flags to
configure default stream fields for datadog logs, where there's no
alternative option to pass extra headers and query args
- added ingest `max` and `min` values of data, which are ingested using
`datadogsketches` API, which is also actively used by serverless
extensions
- use default `.` separator instead of `_` for sketches metric names
until metrics are not sanitized
Historically some of VictoriaMetrics components were optimized for the low rate of memory allocations.
These are: vmagent, single-node VictoriaMetrics and vmstorage. These components benefit from the low
GOGC value, since this allow reducing their memory usage in steady state on typical workloads.
Other VictoriaMetrics components aren't optimized for the reduced rate of memory allocations.
This results in the increased CPU usage spent on garbage collection (GC) in these components,
since it must be triggered at higher rate. See https://tip.golang.org/doc/gc-guide#GOGC for details.
These components do not use too much memory, so it is OK increasing the GOGC for these components
from 30 to 100 - this won't affect the most users.
Keep GOGC to 30 only for vmagent, single-node VictoriaMetrics and vmstorage components.
See 077193d87c and 54b9e1d3cb .
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7902
vmauth started to use request.Host after commit
f4776fec1b for`src_hosts` routing rules.
This commit adds http.Request.Host to the debugInfo output in order to
be consistent with routing logic.
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Regression was introduced at 564e6ea024
after implementing:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6928
ctx.Labels array could be incorrectly updated and changes to it after
relabeling rules can be lost.
E.g. ctx.Labels passed to WriteDataPoint function as slice copy, but
results of relabeling only changed an actual slice at ctx.Labels.
This commit replaces implicit relabeling call with explicit
`TryPrepareLabels` function.
It also reduces code diffs with cluster version and adds integration tests
related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7865
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
While at at, allow passing an array of string values per each JSON entry at extra_filters and extra_stream_filters.
For example, `extra_filters={"foo":["bar","baz"]}` is converted into `foo:in("bar", "baz")` extra filter,
while `extra_stream_fitlers={"foo":["bar","baz"]}` is converted into `{foo=~"bar|baz"}` extra filter.
This should simplify creating faceted search when multiple values per a single log field must be selected.
This is needed for https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7365#issuecomment-2447964259
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5542
Such log fields do not give any useful information during logs' exploration.
They just clutter the output of the `facets` pipe. So it is better to drop such fields by default.
If these fields are needed, then `keep_const_fields` option can be added to `facets` pipe.
### Describe Your Changes
This PR fixes#5796. See the points 6 and 7 in `Steps to reproduce`:
> Now let's set time to only 5ms past the timestamp of the first point,
since even 199ms worked for the second point. Surprise, the point isn't
returned 💥:
>
> ```curl -s $VMQURL -d 'query=series1' -d 'time=1707123456705' -d
'step=1ms' | grep 10 # nothing!```
>
> But, 4ms works: 🤨🤔
>
> ```curl -s $VMQURL -d 'query=series1' -d 'time=1707123456704' -d
'step=1ms' | grep 10 # found```
This happens so because the actual step becomes 5ms due to jitter being
applied. THe fix is to do not apply jitter if scrape interval was not
detected (the case when vmstorage returns only one result). In this case
the scrape interval is set to `5m+step`.
An integration test has been added to check the steps to reproduce and
then to confirm that fix works. Note that the cluster tests are
currently disabled because the fix is not in cluster branch yet.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Artem Fetishev <rtm@victoriametrics.com>
