Fix parsing of IPv6 addresses after discovery. Previously, it could lead
to target being discovered and discarded afterwards.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/8374
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit 99de272b72)
### Describe Your Changes
#8342
fix negative rate result when the lookbehind window is longer than
`-search.maxLookback` or `-search.maxStalenessInterval` and data
contains gap.
This issue was introduced since
[v1.110.0](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/8072).
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
This change would help to track slow queries via alerts or dashboards.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit ba2bf9e73a)
Previously, if indexDB search failed for some reason during search at previous indexDB (aka extDB), VictoriaMetrics stored empty search result at cache. It could cause incorrect search results at subsequent requests.
This commit checks search error and stores request results only on success.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/8345
### Describe Your Changes
Previously, `timestamp` variable was shared by goroutines and modified
during `writeBlock`, verified in
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/8312.
This pull request create new variable within each goroutine to avoid
race condition.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
- [ ] Test on sandbox.
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
These filters can be used for selecting logs where one field value is less than another field value.
These filter complement `<=` and `<` filters for constant literals.
(cherry picked from commit 30974e7f3f)
TooHighQueryLoad should trigger when vmsingle or vmselect can't start
processing read queries for last 15min.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 8f87427c81)
The version tooltips were incorrectly set to `#tip` instead of `#`,
so ` make docs-update-version` didn't catch them.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 3828c01540)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The new version of github.com/VictoriaMetrics/metricsql handles $__interval and $__rate_interval
inside rollup functions in more correct way - it drops square brakets, so VictoriaMetrics
could automatically detect the needed lookbehind window depending on the time distance between real samples.
For example, rate(m[$__rate_interval]) is parsed and processed as rate(m) now.
- `contains_any` selects logs with fields containing at least one word/phrase from the provided list.
The provided list can be generated by a subquery.
- `contains_all` selects logs with fields containing all the words and phrases from the provided list.
The provided list can be generated by a subquery.
### Describe Your Changes
- Fixed 404 links to anomaly score dashboard `.json` file on Github.
- Fixed broken markdown on QuickStart page.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
> (currently in DRAFT) This dashboard and the docs may look differently
after recent review and the feedback received.
As requested by our customers, this PR introduces `anomaly score`-based
dashboard for `vmanomaly` to improve the visual experience and ease the
drill down debugging process for respective anomaly detection setups.
Accompanying guide (under `default` preset mode) is provided as well.
- [For additional
benefits](https://docs.victoriametrics.com/victoriametrics-datasource/#motivation),
the dashboard is based on [VictoriaMetrics
datasource](https://docs.victoriametrics.com/victoriametrics-datasource/)
rather than on `Prometheus` datasource
- Tested locally and on our https://play.victoriametrics.com/
`anomaly_score` data (tenant ID 0)
- To check the guide, build the docs locally (`vmdocs`, `make run
local`) and follow to the
http://localhost:1313/anomaly-detection/presets/#default section
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Previously if rule group parameters were changed, alerting rules related metrics could be deleted due to bug at `utils/metrics` package.
This commit introduces `metrics.Set` per rule group. It holds group and alerting rules metrics. It properly unregister alerting rules metrics and addresses issue.
In addition:
- expose group metrics only once group is started - this helps to avoid
exposing metrics for groups which are created during YAML unmarshaling
and only used to update existing group.
- properly close rules which are discarded after updating existing rules
so that metrics are also correctly closed.
- detect file renames and properly recreate groups "moved" between files.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/8229
Examples:
- `top 5 x, y` is equivalent to `top 5 by (x, y)`
- `uniq foo, bar` is equivalent to `uniq by (foo, bar)`
- `unroll foo, bar` is equivalent to `unroll (foo, bar)`
Examples:
_time:>=2025-02-24Z selects logs with timestamps bigger or equal to 2025-02-24 UTC
_time:>1d selects logs with timestamps older than one day comparing to the current time
This simplifies writing queries with _time filters.
See https://docs.victoriametrics.com/victorialogs/logsql/#time-filter
It looks like the version deployed works differently than in local, and
some paths are not taken correctly. This commit fixes that by adding
absolute paths to the 2 images included in this section.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
It looks like when using html image insertion, the path is changed. This
commit fixes that by redirecting to the previous dir in path.
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
This guide was outdated. the intention of these changes is to:
* Ease maintainability
* Ease user experience
* Encourage the user to quickly set up the product
Some images are removed because they were obsolete or to improve
readability
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
apply proper syntax for code blocks
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Legend settings have been added to **Graph Settings**.
#### **New Features:**
1. **Table View** – Toggle to display the legend in a table format.
2. **Hide Common Values** – Option to hide fields with identical values
across all series.
3. **Hide Min/Medium/Max** – Ability to hide min, median, and max values
from the legend.
4. **Custom Label Format** – Set a custom format for series labels
(applies only to the legend).
5. **Group by Label** – Group legend entries based on a selected label.
Related Issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/8031
Currently, vmalert uses a fixed 10-second client timeout for notifiers,
which can prevent large sets of alerts from being sent successfully.
This introduces `-notifier.sendTimeout` flag to vmalert to control the
client timeout duration for the notifiers.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/8287
Inside PARAM-VALUE, the characters '"' (ABNF %d34), '\' (ABNF %d92),
and ']' (ABNF %d93) MUST be escaped. This is necessary to avoid
parsing errors. Escaping ']' would not strictly be necessary but is
REQUIRED by this specification to avoid syslog application
implementation errors. Each of these three characters MUST be
escaped as '\"', '\\', and '\]' respectively. The backslash is used
for control character escaping for consistency with its use for
escaping in other parts of the syslog message as well as in traditional syslog.
Related RFC:
https://datatracker.ietf.org/doc/html/rfc5424#section-6.3.3
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/8282
This commit properly validate retention flag value input for the enterprise debug UI.
API properly checks:
- presence of global retention configuration
- validate that retention is at least 1 day, same as vmstorage enforcement
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/8343
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Use `rate_sum` instead of `total` output for the following reasons:
* `rate_sum` is far less sensitive for data delays than `total`, since
it represents the speed of change instead of absolute values.
* `rate_sum` remove need in using `rate` function for calculating final
results on query time.
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* make QuickStart first, similarly to vlogs docs
* push release guide to bottom, as it is not for users
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
Based on feedback at:
e4240e61c6 (r1961497609)
Thanks to @vrutkovs for the feedback.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit eccef5f6ec)
### Describe Your Changes
By default, stream aggregation and deduplication stores a single state
per each aggregation output result.
The data for each aggregator is flushed independently once per
aggregation interval. But there's no guarantee that
incoming samples with timestamps close to the aggregation interval's end
will get into it. For example, when aggregating
with `interval: 1m` a data sample with timestamp 1739473078 (18:57:59)
can fall into aggregation round `18:58:00` or `18:59:00`.
It depends on network lag, load, clock synchronization, etc. In most
scenarios it doesn't impact aggregation or
deduplication results, which are consistent within margin of error. But
for metrics represented as a collection of series,
like
[histograms](https://docs.victoriametrics.com/keyconcepts/#histogram),
such inaccuracy leads to invalid aggregation results.
For this case, streaming aggregation and deduplication support mode with
aggregation windows for current and previous state. With this mode,
flush doesn't happen immediately but is shifted by a calculated samples
lag that improves correctness for delayed data.
Enabling of this mode has increased resource usage: memory usage is
expected to double as aggregation will store two states
instead of one. However, this significantly improves accuracy of
calculations. Aggregation windows can be enabled via
the following settings:
- `-streamAggr.enableWindows` at [single-node
VictoriaMetrics](https://docs.victoriametrics.com/single-server-victoriametrics/)
and [vmagent](https://docs.victoriametrics.com/vmagent/). At
[vmagent](https://docs.victoriametrics.com/vmagent/)
`-remoteWrite.streamAggr.enableWindows` flag can be specified
individually per each `-remoteWrite.url`.
If one of these flags is set, then all aggregators will be using fixed
windows. In conjunction with `-remoteWrite.streamAggr.dedupInterval` or
`-streamAggr.dedupInterval` fixed aggregation windows are enabled on
deduplicator as well.
- `enable_windows` option in [aggregation
config](https://docs.victoriametrics.com/stream-aggregation/#stream-aggregation-config).
It allows enabling aggregation windows for a specific aggregator.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit c8fc903669)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
This PR introduces several enhancements and optimizations for the Group
view:
1. **Disable hover effect:**
Add the option to disable the hover effect. This can help reduce CPU
load when viewing a large number of logs.
2. **Limit entries per Group:**
Add the ability to limit the number of records displayed per group. When
a limit is set, groups are rendered sequentially – the next group starts
only after the current group has finished. By default, there is no
limit.
3. **Display group info:**
Include the group number in the title along with the total count of
groups to improve clarity and navigation.
4. **Performance improvement:**
In addition to the features above, separate optimizations reduce CPU
load during hover interactions by approximately 5-10%.
Related issue: #8135
<details>
<summary>Demo UI</summary>
<img
src="https://github.com/user-attachments/assets/9c89066e-28af-4df2-b368-2380412b3c3f"/>
<img
src="https://github.com/user-attachments/assets/a2338c8d-558c-437c-969e-f825043eb35b"/>
</details>
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
(cherry picked from commit b2a99d7c6f)
There is little sense in keeping too big buffers - they just waste RAM and do not reduce
the load on GC too much. So it is better dropping such buffers at Reset instead of keeping them around.
(cherry picked from commit b58e2ab214)
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit 616fed47a0)
This should improve query performance for logs with hundreds of fields (aka wide events).
Previously there was a high chance that the data for multiple log fields is stored in the same file.
This could result in query performance slowdown and/or increased disk read IO,
since the operating system could read unnecessary data for the fields, which aren't used in the query.
Now log fields are guaranteed to be stored in separate files until the number of fields exceeds 256.
After that multiple log fields start sharing files.
(cherry picked from commit 9bb5ba5d2f)
In this first step, content is moved from cloud docs root to a new
folder: get started. This one will allocate: overview, key features and
benefits, quickstart and guides and best practices.
### Changes Description
- In order to reuse content, the overview and README sections are
merged.
- A dummy Get started section is created, but needs further work.
- Next steps will also include reworking the quick start section and
creating the 2 new docs
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 95a42717b6)
Add missing sudo's to binary install snippets
### Describe Your Changes
Some of the commands the need to be done as root are missing invocation
via sudo. This commit adds missing sudo invocations.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 13fa70a03a)
### Describe Your Changes
exclude operator and helm charts docs sync as these repos will be synced
with vmdocs directly
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 5bdbafb9b6)
Commit 68791f9ccc introduced regression.
It performed basicAuth check before built-in routes. It made impossible
to bypass basic authorization with `authKey` param.
This commit fixeds that issue and removes unneeded check. It also adds
integration tests for this case.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7345
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
This commit changes journald ingestion validation regex:
from `^[A-Z_][A-Z0-9_]+` to `^[A-Z_][A-Z0-9_]*`.
It's needed to properly support entities with single-character
names.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/8314
### Describe Your Changes
Just an extremely nit-picky grammatical fix.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
This eliminates a class of potential bugs with incorrect stats calculations when an additional filter
is applied to the blockResult before passing it to the stats function, and this filter removes
all the rows from blockResult.
