The system links are absolute, e.g. they start from `/`, so there are high chances
they won't work as expected when requested via proxy such as vmselect with -vmalert.proxyURL
command-line flag.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/3424
http.Request was used as a part of state struct
for generating the curl command when viewing the rule's
state changes.
It appears, that holding a referencing is far more expensive
than generating the curl command immediately.
On the test with 40k rules, this change reduces memory
and CPU usage by 50%.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Document the change at docs/CHANGELOG.md
- Run `make docs-sync` for copying app/vmgateway/README.md to docs/vmgateway.md
in order to propagate docs' changes to https://docs.victoriametrics.com/vmgateway.html
* vmalert: correctly return error for RW failures
By mistake, in 0989649ad0 the error
for remote write failures weren't return to user.
This change fixes it.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The main purpose of this command-line flag is to increase the lifetime of low-end flash storage
with the limited number of write operations it can perform. Such flash storage is usually
installed on Raspberry PI or similar appliances.
For example, `-inmemoryDataFlushInterval=1h` reduces the frequency of disk write operations
to up to once per hour if the ingested one-hour worth of data fits the limit for in-memory data.
The in-memory data is searchable in the same way as the data stored on disk.
VictoriaMetrics automatically flushes the in-memory data to disk on graceful shutdown via SIGINT signal.
The in-memory data is lost on unclean shutdown (hardware power loss, OOM crash, SIGKILL).
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3337
Method `metrics()` now pre-allocates slices for labels
and results from query responses. This reduces the number
of allocations on the hot path for instant requests.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The recent change in modifying default value
of `datasource.queryStep` flag resulted in situation
where replay mode was always running queries with
step=`datasource.queryStep`. When it should always
use rule's evaluation interval.
The fix is related not to replay mode only, but
for all Range requests. Now step param is set
individually for each mode.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmalert: add `remoteWrite.sendTimeout` command-line flag to configure timeout for sending data to `remoteWrite.url`
* vmalert: remove WriteTimeout from clients Cfg
No need to have it as a part of configuration struct:
* the client isn't used by other packages;
* there are no internal tests to check the WriteTimeout.
* vmalert: remove DisablePathAppend from clients Cfg
No need to have it as a part of configuration struct:
* the client isn't used by other packages;
* there are no internal tests to check the DisablePathAppend.
Co-authored-by: hagen1778 <roman@victoriametrics.com>
- Return meta-labels for the discovered targets via promutils.Labels
instead of map[string]string. This improves the speed of generating
meta-labels for discovered targets by up to 5x.
- Remove memory allocations in hot paths during ScrapeWork generation.
The ScrapeWork contains scrape settings for a single discovered target.
This improves the service discovery speed by up to 2x.
* flag reference update
there is no flag `-datasource.disablePathAppend` and datasource actually checking for `-remoteRead.disablePathAppend`
* update source for doc as well
* fix: reset the value of the switches trace and cache
* fix: add cursor text for inputs
* fix: solve the Infinite loop of useFetchQuery.ts
* fix: change condition for show/hide autocomplete
* fix: add limit error length for input
The default list of alerting rules contains the basic
rules for checking vmalert's health state and is recommended
to use for monitoring vmalert deployments.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The change disables initing the `-version` flag in new
`urfave/cli/v2` update. The `-version` flag conflicts
with the identical flag from `lib/buildinfo` and causes panic.
See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/3299
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* feat: apply serverURL on down Enter
* fix: change method of set time range
* fix: remove prevent run fetch without changes
* fix: prevent reset timerange when autorefresh
Previously the `quotesEscape` function was escaping only double quotes.
This wasn't enough, since the input string could contain other special chars,
which must be escaped when put inside JSON string. For example, carriage return and line feed chars (\n\r),
backslash char, etc. This led to the following issues, which were improperly fixed:
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/890 - this issue
was "fixed" by introducing the `crlfEscape` function, which led to unnecessary
complications in user templates, while not fixing various corner cases
such as backslash chars in the input string.
See 1de15ad490
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3139 - this issue
was "fixed" by urlencoding the whole string passed to -external.alert.source
command-line flag. This led to invalid urls, which couldn't be parsed by Grafana.
See 00c838353d
and 4bd0244599
This commit properly encodes the input string passed to `quotesEscape`, so it can be safely embedded inside JSON strings.
This commit deprecates crlfEscape template function and adds the following new template functions:
- strvalue and stripDomain - these functions are supported by Prometheus, so they were added
for compatibility purposes.
- jsonEscape and htmlEscape for converting the input string to valid quoted JSON string
and for html-escaping the input string, so it could be safely embedded as a plaintext
into html.
This commit also documents all supported template functions at https://docs.victoriametrics.com/vmalert.html#template-functions
The deprecated crlfEscape function isn't documented on purpose, since its usefulness is negative in general case.
This reverts commit 00c838353d.
Reason for revert: it incorrectly fixes the issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3139 .
Now `-external.alert.source=explore?orgId=1&left=...` is converted to the following invalid url, which cannot be handled by Grafana:
https://grafana.example.com/explore%3ForgId%3D1%26left%3D...
The next commit will contain the correct fix of the issue - the `quotesEscape` function must
properly escape the string, so it could be embedded into JSON string. This function must
properly escape \n\r chars too. In this case the `crlfEscape` function becomes unnecessary.
Actually, the next commit makes the `crlfEscape` function deprecated.
The searchTSIDs function was searching for metricIDs matching the the given tag filters
and then was locating the corresponding TSID entries for the found metricIDs.
The TSID entries aren't needed when searching for time series names (aka MetricName),
so this commit removes the uneeded TSID search from the implementation of /api/v1/series API.
This improves perfromance of /api/v1/series calls.
This commit also improves performance a bit for /api/v1/query and /api/v1/query_range calls,
since now these calls cache small metricIDs instead of big TSID entries
in the indexdb/tagFilters cache (now this cache is named indexdb/tagFiltersToMetricIDs)
without the need to compress the saved entries in order to save cache space.
This commit also removes concurrency limiter during searching for matching time series,
which was introduced in 8f16388428, since the concurrency
for all the read queries is already limited with -search.maxConcurrentRequests command-line flag.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/648
The message about dropped data still remains at `error` level.
The change supposed to make log message more clear about how
serious it is.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* feat: add maximum display series by tabs
* feat: add warning on PredefinedPanels.tsx
* docs/CHANGELOG.md: vmui limit number of plotted series
* docs/CHANGELOG.md: vmui limit number of plotted series
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
The default value of `-datasource.queryStep` has changed, so we update
the troubleshooting docs accordingly.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Due to auto-refactoring, the filed `state` was automatically
renamed to `ruleState` when the entity with the same name
was renamed in other file. Reverting the change.
https://github.com/VictoriaMetrics/helm-charts/issues/391
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
vmalert: prevent duplicating label `alertname` for notifications
The issue has no impact on alerting procedure. But still needs to be fixed
for clarity.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3053
Signed-off-by: lihaowei <haoweili35@gmail.com>
Sort labels explicitly after calling the ParsedConfigs.Apply() when needed.
This reduces CPU usage when performing metric-level relabeling, where labels' sorting isn't needed.
* Optimize fast path for /api/v1/import when importing numeric values
* Move the docs about the change from features to bugfixes at docs/CHANGELOG.md
* Update tests at lib/protoparser/vmimport
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3161
* app/vmselect: properly work when export import json from `api/v1/{export, import}` API
* app/vmselect: update convert function
* app/vmselect: export null if `math.IsNaN(v)`
* app/vmselect: get float from json
* lib/protoparser: add test
* docs: add change log
* lib/protoparser: make export import api compatible
* Document the addition of Azure blob storage support in vmbackup / vmrestore
* List the supported storage system types at docs/vmrestore.md
* Mention about azblob storage system support at -src and -dst command-line flags
for vmbackup / vmrestore tools.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1029
* Use vm_account_id and vm_project_id labels to be consistent with https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#multitenancy-via-labels
* Document the feature that vmalert now exposes vm_account_id and vm_project_id
labels if -clusterMode is set.
* Use literal strings instead of string constants for vm_account_id and vm_project_id.
This improves code readability.
The change is supposed to provide additional flexibility for generating alert's
source link based on label values.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Incorrect 301 redirects can be cached by user agents such as web browsers.
This can complicate recovery procedure after the incorrect redirect is fixed,
e.g. web browser cache must be reset.
The related issue - https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1752
* app/vminsert: allows parsing tenant id from labels
it should help mitigate issues with vmagent's multiTenant mode, which works incorrectly at heavy load
and it cannot handle more then 100 different tenants.
This functional hidden with flag and do not change vminsert default behaviour
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2970
* Update docs/Cluster-VictoriaMetrics.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* wip
* app/vminsert/netstorage: clean remaining labels in order to free up GC
* docs/Cluster-VictoriaMetrics.md: typo fix
* wip
* wip
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Allow configuring authorization params per list of targets
in vmalert's notifier config for `static_configs`.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2690
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Previously empty series (e.g. series with all NaN samples) were passed to aggregate functions.
Such series must be ingored by all the aggregate functions.
So it is better from consistency PoV filtering out empty series before applying aggregate functions.
* app/vmselect: ignore empty series for `limit_offset`
VictoriaMetrics doesn't return empty series (with all NaN values) to
the user. But such series are filtered after transform functions.
It means `limit_offset` will account for empty series as well.
For example, let's consider following data set:
```
time series:
foo{label="1"} NaN, NaN, NaN, NaN // empty series
foo{label="2"} 1, 2, 3, 4
foo{label="3"} 4, 3, 2, 1
```
When user requests all series for metric `foo` the empty series
will be filtered out:
```
/query=foo:
foo{label="v2"} 1, 2, 3, 4
foo{label="v3"} 4, 3, 2, 1
```
But `limit_offset(1, 1, foo)` is applied to original series, not filtered yet.
So it will return `foo{label="v2"}` (skips the first in list)
```
/query=limit_offset(1, 1, foo):
foo{label="v2"} 1, 2, 3, 4
```
Expected result would be to apply `limit_offset` to already filtered list,
so in result we receive `foo{label="v3"}`:
```
/query=limit_offset(1, 1, foo):
foo{label="v3"} 4, 3, 2, 1
```
The change does exactly that - filters empty series before applying `limit_offset`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmselect: ignore empty series for `limit_offset`
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
According to Ruler specification, only labels returned within time series
should be available for use in annotations.
For long time, vmalert didn't respect this rule. And in PR
https://github.com/VictoriaMetrics/VictoriaMetrics/pull/2403
this was fixed for the sake of compatibility. However, this resulted
into users confusion, as they expected all configured and extra labels
to be available - https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3013
This fix allows to use extra labels in Annotations. But in the case of conflicts
the original labels (extracted from time series) are preferred.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
