By default, vmalert will make multiple retry attempts with exponential delay.
The total time spent during retry attempts shouldn't exceed `-remoteWrite.retryMaxTime` (default is 30s).
When retry time is exceeded vmalert drops the data dedicated for `-remoteWrite.url`.
Before, vmalert dropped data after 5 retry attempts with 1s delay between attempts (not configurable).
See `-remoteWrite.retryMinInterval` and `-remoteWrite.retryMaxTime` cmd-line flags.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
vmalert: retry all errors except 4XX status codes
Retry all errors except 4XX status codes while pushing via remote-write
to the remote storage. Previously, errors like broken connection could
prevent vmalert from retrying the request.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmalert: add `remoteWrite.sendTimeout` command-line flag to configure timeout for sending data to `remoteWrite.url`
* vmalert: remove WriteTimeout from clients Cfg
No need to have it as a part of configuration struct:
* the client isn't used by other packages;
* there are no internal tests to check the WriteTimeout.
* vmalert: remove DisablePathAppend from clients Cfg
No need to have it as a part of configuration struct:
* the client isn't used by other packages;
* there are no internal tests to check the DisablePathAppend.
Co-authored-by: hagen1778 <roman@victoriametrics.com>
The message about dropped data still remains at `error` level.
The change supposed to make log message more clear about how
serious it is.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
ioutil.ReadAll is deprecated since Go1.16 - see https://tip.golang.org/doc/go1.16#ioutil
VictoriaMetrics requires at least Go1.18, so it is OK to switch from ioutil.ReadAll to io.ReadAll.
This is a follow-up for 02ca2342ab
* vmalert: split alert's `Start` field into `ActiveAt` and `Start`
The `ActiveAt` field identifies when alert becomes active for rules
with `for > 0`. Previously, this value was stored in field `Start`.
The field `Start` now identifies the moment alert became `FIRING`.
The split is needed in order to distinguish these two moments
in the API responses for alerts.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: support specific moment of time for rules evaluation
The Querier interface was extended to accept a new argument
used as a timestamp at which evaluation should be made.
It is needed to align rules execution time within the group.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: mark disappeared series as stale
Series generated by alerting rules, which were sent to remote write
now will be marked as stale if they will disappear on the next
evaluation. This would make ALERTS and ALERTS_FOR_TIME series
more precise.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: evaluate rules at fixed timestamp
Before, time at which rules were evaluated was calculated
right before rule execution. The change makes sure
that timestamp is calculated only once per evalution round
and all rules are using the same timestamp.
It also updates the logic of resending of already resolved
alert notification.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: allow overridin `alertname` label value if it is present in response
Previously, `alertname` was always equal to the Alerting Rule name. Now,
its value can be overriden if series in response containt the different value
for this label.
The change is needed for improving compatibility with Prometheus.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: align rules evaluation in time
Now, evaluation timestamp for rules evaluates as if
there was no delay in rules evaluation. It means, that
rules will be evaluated at fixed timestamps+group_interval.
This way provides more consistent evaluation results and
improves compatibility with Prometheus,
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add metric for missed iterations
New metric `vmalert_iteration_missed_total` will show
whether rules evaluation round was missed.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: reduce delay before the initial rule evaluation in group
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: rollback alertname override
According to the spec:
```
The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label.
```
https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: throw err immediately on dedup detection
```
The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts
or add samples to samples receiver if there is more than one alert with the same labels
```
https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: cleanup
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: use strings builder to reduce allocs
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: allow to disable automatically added path to remote write address via disablePathAppend flag
* docs: update docs to include remoteWrite.disablePathAppend
* app/vmalert: add retries to remotewrite
Remotewrite pkg now does limited number of retries if write request failed.
This suppose to make vmalert state persisting more reliable.
New metrics were added to remotewrite in order to track rows/bytes sent/dropped.
defaultFlushInterval was increased from 1s to 5s for sanity reasons.
* fix
* wip
* wip
* wip
* fix bits alignment bug for 32-bit systems
* fix mistakenly dropped field
* Fix Auto metrics relabeled errors
* Finalize auto-genenated Labels
* Fix Test Errors
* fix error logs when queue is full
Co-authored-by: xinyulong <xinyulong@kuaishou.com>
app/vmalert: add support for TLS configuration
Add support for TLS optional configuration in a similar fashion to what
is currently supported in other vmutils such as vmagent. TLS
configuration options are distinct for datasource, remoteRead,
remoteWrite as well as notifier.
* vmalert: Add recording rules support.
Recording rules support required additional service refactoring since
it wasn't planned to support them from the very beginning. The list
of changes is following:
* new entity RecordingRule was added for writing results of MetricsQL
expressions into remote storage;
* interface Rule now unites both recording and alerting rules;
* configuration parser was moved to separate package and now performs
more strict validation;
* new endpoint for listing all groups and rules in json format was added;
* evaluation interval may be set to every particular group;
* vmalert: uncomment tests
* vmalert: rm outdated TODO
* vmalert: fix typos in README
* feat: add remoteWrite.maxQueueSize to reduce queue full
* rename remote(write|read) flags to remote(Write|Read) for the sake of consistency
Co-authored-by: xiaobeibei <xiaobeibei@bigo.sg>
* app/vmalert: initial remote-write support for alerts state persistence.
If `remotewrite.url` flag is set, vmalert will send alerts state via remote-write protocol to remote storage. The sending is asynchronous to avoid blocking calls in rules evaluation loop.
* app/vmalert: merge with master
* app/vmalert: write both `instant` and `for` alerts timeseries states in remote storage.
