* app/{vmagent,vminsert}: adds /v1/metrics suffix for opentelemetry route path
it must fix compatibility with opentemetry-collector [spec](https://opentelemetry.io/docs/specs/otlp/\#otlphttp-request)
this suffix is hard-coded and cannot be changed with collector configuration
* Apply suggestions from code review
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Document the ability to read OpenTelemetry data from Amazon Firehose at docs/CHANGELOG.md
- Simplify parsing Firehose data. There is no need in trying to optimize the parsing with fastjson
and byte slice tricks, since OpenTelemetry protocol is really slooow because of over-engineering.
It is better to write clear code for better maintanability in the future.
- Move Firehose parser from /lib/protoparser/firehose to lib/protoparser/opentelemetry/firehose,
since it is used only by opentelemetry parser.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5893
This should smooth CPU and RAM usage spikes related to these periodic tasks,
by reducing the probability that multiple concurrent periodic tasks are performed at the same time.
- Add links to relevant docs into descriptions for every -kafka.* and -gcp.pubsub.* command-line flags.
- Wait until message processing goroutines are stopped before returning from gcppubsub.Stop().
- Prevent from multiple calls to Init() without Stop().
- Drop message if tenantID cannot be parsed properly.
- Take into account tenantID for all the supported message formats.
- Support gzip-compressed messages for graphite format.
- Use exponential backoff sleep when the message cannot be pushed to remote storage systems
because of disabled on-disk persistence - https://docs.victoriametrics.com/vmagent.html#disabling-on-disk-persistence
- Unblock from sleep as soon as Stop() is called. Previously the sleep could take up to 2 seconds after Stop() is called.
- Remove unused globalCtx and initContext from app/vmagent/remotewrite/gcppubsub
- Mention Google PubSub support at docs/enterprise.md
- Make Google PubSub docs more clear at docs/vmagent.md
This is a follow-up for commits 115245924a5f096c5a3383d6cc8e8b6fbd421984
and e6eab781ce42285a6a1750dc01eba6801dd35516 .
Updates https://github.com/VictoriaMetrics/VictoriaMetrics-enterprise/pull/717
Updates https://github.com/VictoriaMetrics/VictoriaMetrics-enterprise/pull/713
Co-authored-by: Andrew Chubatiuk <andrew.chubatiuk@motional.com>
Co-authored-by: Nikolay <https://github.com/f41gh7>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit 543f218fe9)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This is a follow-up for f60c08a7bd
Changes:
- Make sure all the urls related to NewRelic protocol start from /newrelic . Previously some urls were started from /api/v1/newrelic
- Remove /api/v1 part from NewRelic urls, since it has no sense
- Remove automatic transformation from CamelCase to snake_case for NewRelic labels and metric names,
since it may complicate the transition from NewRelic to VictoriaMetrics. Preserve all the metric names and label names,
so users could query metrics and labels by the same names which are used in NewRelic.
The automatic transformation from CamelCase to snake_case can be added later as a special action for relabeling rules if needed.
- Properly update per-tenant data ingestion stats at app/vmagent/newrelic/request_handler.go . Previously it was always zero.
- Fix NewRelic urls in vmagent when multitenant data ingestion is enabled. Previously they were mistakenly started from `/`.
- Document NewRelic data ingestion url at docs/Cluster-VictoriaMetrics.md
- Remove superflouos memory allocations at lib/protoparser/newrelic
- Improve tests at lib/protoparser/newrelic/*
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3520
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4712
* lib/promscrape: make concurrency control optional
Before, `-maxConcurrentInserts` was limiting all calls to `promscrape.Parse`
function: during ingestion and scraping. This behavior is incorrect.
Cmd-line flag `-maxConcurrentInserts` should have effect onl on ingestion.
Since both pipelines use the same `promscrape.Parse` function, we extend it
to make concurrency limiter optional. So caller can decide whether concurrency
should be limited or not.
This commit makes c53b5788b4
obsolete.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Revert "dashboards: move `Concurrent inserts` panel to Troubleshooting section"
This reverts commit c53b5788b4.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vminsert: properly close vmstorage connection
previously vmstorage may stuck in broken state until vminsert restarts
since vmstorage was marked as read-only and connection was broken to it.
checkReadonly function never marked connection as broken
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4870
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* app/vminsert: fixes readonly check
previously vminsert doesn't check readOnly state for vmstorage, since check was never performed for nil buffer
In this case every 30 second storage node loss readonly state and received some data.
It caused re-routing and possible slow down for ingestion
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4870
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Disallow parsing multitenant token at auth.NewToken().
Use auth.NewTokenPossibleMultitenant() at vminsert only. All the other callers should call auth.NewToken(),
since they do not support multitenant token.
This is a follow-up for f0c06b428e
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4910
- Document the change at docs/CHANGELOG.md
- Set the default value for -vmstorageUserTimeout to 3 seconds. This is much better
than the 0 value, which means that TCP connection to unreachable vmstorage could block
for up to 16 minutes.
- Document -vmstorageUserTimeout at docs/Cluster-VictoriaMetrics.md
`TCP_USER_TIMEOUT` (since Linux 2.6.37) specifies the maximum amount of
time that transmitted data may remain unacknowledged before TCP will
forcibly close the connection and return `ETIMEDOUT` to the application.
Setting a low TCP user timeout allows RPC connections quickly reroute
around unavailable storage nodes during network interruptions.
* lib/protoparser: adds opentelemetry parser
app/{vmagent,vminsert}: adds opentelemetry ingestion path
Adds ability to ingest data with opentelemetry protocol
protobuf and json encoding is supported
data converted into prometheus protobuf timeseries
each data type has own converter and it may produce multiple timeseries
from single datapoint (for summary and histogram).
only cumulative aggregationFamily is supported for sum(prometheus
counter) and histogram.
Apply suggestions from code review
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
updates deps
fixes tests
wip
wip
wip
wip
lib/protoparser/opentelemetry: moves to vtprotobuf generator
go mod vendor
lib/protoparse/opentelemetry: reduce memory allocations
* wip
- Remove support for JSON parsing, since it is too fragile and is rarely used in practice.
The most clients send OpenTelemetry metrics in protobuf.
The JSON parser can be added in the future if needed.
- Remove unused code from lib/protoparser/opentelemetry/pb and lib/protoparser/opentelemetry/proto
- Do not re-use protobuf message between ParseStream() calls, since there is high chance
of high fragmentation of the re-used message because of too complex nested structure of the message.
* wip
* wip
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This eliminates the need in .(*T) casting for results obtained from Load()
Leave atomic.Value for map, since atomic.Pointer[map[...]...] makes double pointer to map,
because map is already a pointer type.
VictoriaMetrics_ProjectID and VictoriaMetrics_AccountID labels.
It should help to migrate for new labels vm_account_id vm_project_id without service downtime
