* app/vmstorage: close vminsert connections gradually before stopping storage
Implements graceful shutdown approach suggested here - https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4922#issuecomment-1768146878
Test results for this can be found here - https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4922#issuecomment-1790640274
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmstorage: update graceful shutdown logic
- close connections from vminsert in determenistic order
- update flag description
- lower default timeout to 25 seconds. 25 seconds value was chosen because the lowest default value used in default configuration deployments is 30s(default value in Kubernetes and ansible-playbooks).
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/cluster: add information about re-routing enhancement during restart
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/changelog: add entry for new command-line flag
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* {app/vmstorage,lib/ingestserver}: address review feedback
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/cluster: add note to update workload scheduler timeout
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* wip
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This case is possible after the following steps:
1. vmagent tries to perform handshake with the -remoteWrite.url in order to determine whether
the remote storage supports zstd-compressed data.
2. The remote storage is unavailable during the handshake. In this case vmagent falls back to Snappy compression
for the data sent to the remote storage.
3. vmagent compresses the collected data into blocks with Snappy and puts these blocks to persistent queue on disk.
4. The remote storage becomes available.
5. vmagent restarts, performs the handshake with the remote storage and detects that it supports zstd-compressed data.
6. vmagent starts sending Snappy-compressed data from persistent queue to the remote storage,
while falsely advertizing it sends zstd-compressed data.
7. The remote storage receives Snappy-compressed data and fails unpacking it with zstd.
The solution is to just fall back to Snappy decompression if zstd decompression fails.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5301
We have failed test on master branch.
```
--- FAIL: TestFormatLogMessage (0.00s)
logger_test.go:24: unexpected result; got
"foo: abcde, \"foo bar baz\", xx"
want
"foo: a..e, \"f..z\", xx"
```
if failed because maxArgs maxLen <= 4 in the `LimitStringLen` in that case we always will return the income string
but in the test we limit the maxLen by value 4
```
f("foo: %s, %q, %s", []interface{}{"abcde", fmt.Errorf("foo bar baz"), "xx"}, 4, `foo: a..e, "f..z", xx`)
Previously entries which were accessed only 1 time weren't cached.
It has been appeared that some rarely executed heavy queries may read indexdb block twice
in a row instead of once. There is no need in caching such a block then.
This change should eliminate cache size spikes for indexdb/dataBlocks when such heavy queries are executed.
Expose -blockcache.missesBeforeCaching command-line flag, which can be used for fine-tuning
the number of cache misses needed before storing the block in the caching.
New labels `reason="wrong basic auth creds"` and `reason="wrong auth key"` were
added to metric `vm_http_request_errors_total` to help identify auth errors.
https://github.com/victoriaMetrics/victoriaMetrics/issues/4590
Co-authored-by: Rao, B V Chalapathi <b_v_chalapathi.rao@nokia.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit 0638bbe69c)
support `Strict-Transport-Security`, `Content-Security-Policy` and `X-Frame-Options`
HTTP headers in all VictoriaMetrics components.
The values for headers can be specified by users via the following flags:
`-http.header.hsts`, `-http.header.csp` and `-http.header.frameOptions`.
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit ad839aa492)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This allows substituting FATAL panics with recoverable runtime errors such as missing or invalid TLS CA file
and/or missing/invalid /var/run/secrets/kubernetes.io/serviceaccount/namespace file.
Now these errors are logged instead of PANIC'ing, so they can be fixed by updating the corresponding files
without the need to restart vmagent.
This is a follow-up for 90427abc65
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5243
Previously url watchers for pod, service and node objects could be mistakenly closed
when service discovery was set up only for endpoints and endpointslice roles,
since watchers for these roles may start start pod, service and node url watchers
with nil apiWatcher passed to groupWatcher.startWatchersForRole().
Now all the url watchers, which belong to a particular groupWatcher, are stopped at once
when this groupWatcher has no apiWatcher subscribers.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5216
The issue has been introduced in v1.93.5 when addressing https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4850
* do not print redundant error logs when failed to scrape consul or nomad target
prometheus performs the same because it uses consul lib which just drops the error(1806bcb38c/api/api.go (L1134))
- Make sure that invalid/missing TLS CA file or TLS client certificate files at vmagent startup
don't prevent from processing the corresponding scrape targets after the file becomes correct,
without the need to restart vmagent.
Previously scrape targets with invalid TLS CA file or TLS client certificate files
were permanently dropped after the first attempt to initialize them, and they didn't
appear until the next vmagent reload or the next change in other places of the loaded scrape configs.
- Make sure that TLS CA is properly re-loaded from file after it changes without the need to restart vmagent.
Previously the old TLS CA was used until vmagent restart.
- Properly handle errors during http request creation for the second attempt to send data to remote system
at vmagent and vmalert. Previously failed request creation could result in nil pointer dereferencing,
since the returned request is nil on error.
- Add more context to the logged error during AWS sigv4 request signing before sending the data to -remoteWrite.url at vmagent.
Previously it could miss details on the source of the request.
- Do not create a new HTTP client per second when generating OAuth2 token needed to put in Authorization header
of every http request issued by vmagent during service discovery or target scraping.
Re-use the HTTP client instead until the corresponding scrape config changes.
- Cache error at lib/promauth.Config.GetAuthHeader() in the same way as the auth header is cached,
e.g. the error is cached for a second now. This should reduce load on CPU and OAuth2 server
when auth header cannot be obtained because of temporary error.
- Share tls.Config.GetClientCertificate function among multiple scrape targets with the same tls_config.
Cache the loaded certificate and the error for one second. This should significantly reduce CPU load
when scraping big number of targets with the same tls_config.
- Allow loading TLS certificates from HTTP and HTTPs urls by specifying these urls at `tls_config->cert_file` and `tls_config->key_file`.
- Improve test coverage at lib/promauth
- Skip unreachable or invalid files specified at `scrape_config_files` during vmagent startup, since these files may become valid later.
Previously vmagent was exitting in this case.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959
* app/vmselect: limit the number of parallel workers by 32
The change should improve performance and memory usage during query processing
on machines with big number of CPU cores. The number of parallel workers for
query processing is controlled via `-search.maxWorkersPerQuery` command-line flag.
By default, the number of workers is limited by the number of available CPU cores,
but not more than 32. The limit can be increased via `-search.maxWorkersPerQuery`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
- The `-search.maxWorkersPerQuery` command-line flag doesn't limit resource usage,
so move it from the `resource usage limits` to `troubleshooting` chapter at docs/Single-server-VictoriaMetrics.md
- Make more clear the description for the `-search.maxWorkersPerQuery` command-line flag
- Add the description of `-search.maxWorkersPerQuery` to docs/Cluster-VictoriaMetrics.md
- Limit the maximum value, which can be passed to `-search.maxWorkersPerQuery`, to GOMAXPROCS,
because bigger values may worsen query performance and increase CPU usage
- Improve the the description of the change at docs/CHANGELOG.md. Mark it as FEATURE instead of BUGFIX,
since it is closer to a feature than to a bugfix.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5087
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* fix inconsistent behaviors with prometheus when scraping
1. address https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959. skip job with wrong syntax in `scrape_configs` with error logs instead of exiting;
2. show error messages on vmagent /targets ui if there are wrong auth configs in `scrape_configs`, previously will print error logs and do scrape without auth header;
3. don't send requests if there are wrong auth configs in:
1. vmagent remoteWrite;
2. vmalert datasource/remoteRead/remoteWrite/notifier.
* add changelogs
* address review comments
* fix ut
* fixed error when creating a full backup using the `-origin` flag (#5144)
* Update docs/CHANGELOG.md
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This is a follow-up for f60c08a7bd
Changes:
- Make sure all the urls related to NewRelic protocol start from /newrelic . Previously some urls were started from /api/v1/newrelic
- Remove /api/v1 part from NewRelic urls, since it has no sense
- Remove automatic transformation from CamelCase to snake_case for NewRelic labels and metric names,
since it may complicate the transition from NewRelic to VictoriaMetrics. Preserve all the metric names and label names,
so users could query metrics and labels by the same names which are used in NewRelic.
The automatic transformation from CamelCase to snake_case can be added later as a special action for relabeling rules if needed.
- Properly update per-tenant data ingestion stats at app/vmagent/newrelic/request_handler.go . Previously it was always zero.
- Fix NewRelic urls in vmagent when multitenant data ingestion is enabled. Previously they were mistakenly started from `/`.
- Document NewRelic data ingestion url at docs/Cluster-VictoriaMetrics.md
- Remove superflouos memory allocations at lib/protoparser/newrelic
- Improve tests at lib/protoparser/newrelic/*
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3520
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4712
* lib/promscrape: make concurrency control optional
Before, `-maxConcurrentInserts` was limiting all calls to `promscrape.Parse`
function: during ingestion and scraping. This behavior is incorrect.
Cmd-line flag `-maxConcurrentInserts` should have effect onl on ingestion.
Since both pipelines use the same `promscrape.Parse` function, we extend it
to make concurrency limiter optional. So caller can decide whether concurrency
should be limited or not.
This commit makes c53b5788b4
obsolete.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Revert "dashboards: move `Concurrent inserts` panel to Troubleshooting section"
This reverts commit c53b5788b4.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Move uniqueFields from rows to blockStreamMerger struct.
This allows localizing all the references to uniqueFields inside blockStreamMerger.mustWriteBlock(),
which should improve readability and maintainability of the code.
- Remove logging of the event when blocks cannot be merged because they contain more than maxColumnsPerBlock,
since the provided logging didn't provide the solution for the issue with too many columns.
I couldn't figure out the proper solution, which could be helpful for end user,
so decided to remove the logging until we find the solution.
This commit also contains the following additional changes:
- It truncates field names longer than 128 chars during logs ingestion.
This should prevent from ingesting bogus field names.
This also should prevent from too big columnsHeader blocks,
which could negatively affect search query performance,
since columnsHeader is read on every scan of the corresponding data block.
- It limits the maximum length of const column value to 256.
Longer values are stored in an ordinary columns.
This helps limiting the size of columnsHeader blocks
and improving search query performance by avoiding
reading too long const columns on every scan of the corresponding data block.
- It deduplicates columns with identical names during data ingestion
and background merging. Previously it was possible to pass columns with duplicate names
to block.mustInitFromRows(), and they were stored as is in the block.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4762
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4969
* lib/promscrape: add metric `vm_promscrape_scrapes_skipped_total`
add metric `vm_promscrape_scrapes_skipped_total`to show whether vmagent skips the scrapes.
This could happen if vmagent is overloaded or target is responding too slow for configured `scrape_interval`.
The follow-up commit should add a corresponding alerting rule and panel to vmagent dashboard.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* deployment/docker: add `TooManyScrapeSkips` alerting rule for vmagent
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: add panels `Scrape duration 0.99 quantile` and `Skipped scrapes` to vmagent dashboard
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Compare the actual free disk space to the value provided via -storage.minFreeDiskSpaceBytes
directly inside the Storage.IsReadOnly(). This should work fast in most cases.
This simplifies the logic at lib/storage.
- Do not take into account -storage.minFreeDiskSpaceBytes during background merges, since
it results in uncontrolled growth of small parts when the free disk space approaches -storage.minFreeDiskSpaceBytes.
The background merge logic uses another mechanism for determining whether there is enough
disk space for the merge - it reserves the needed disk space before the merge
and releases it after the merge. This prevents from out of disk space errors during background merge.
- Properly handle corner cases for flushing in-memory data to disk when the storage
enters read-only mode. This is better than losing the in-memory data.
- Return back Storage.MustAddRows() instead of Storage.AddRows(),
since the only case when AddRows() can return error is when the storage is in read-only mode.
This case must be handled by the caller by calling Storage.IsReadOnly()
before adding rows to the storage.
This simplifies the code a bit, since the caller of Storage.MustAddRows() shouldn't handle
errors returned by Storage.AddRows().
- Properly store parsed logs to Storage if parts of the request contain invalid log lines.
Previously the parsed logs could be lost in this case.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4737
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4945
This should reduce tail latency during data ingestion.
This shouldn't slow down data ingestion in the worst case, since assisted merges are spread among
distinct addRows/addItems calls after this change.
* lib/logstorage: prevent from panic during background merge
Fixes panic during background merge when resulting block would contain more columns than maxColumnsPerBlock.
Buffered data will be flushed and replaced by the next block.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4762
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/logstorage: clarify field description and comment
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/logstorage: switch to read-only mode when running out of disk space
Added support of `--storage.minFreeDiskSpaceBytes` command-line flag to allow graceful handling of running out of disk space at `--storageDataPath`.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4737
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/logstorage: fix error handling logic during merge
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/logstorage: fix log level
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
It was added in order to limit number of goroutines performing assisted merges during ingestion.
It turned out that blocking ingestion goroutines lower ingestion performance and limits overall ingestion around 40k items per seconds because of lock contention.
Removing parts merge sync.Cond allows to remove lock contention at write path and significantly improves write performance.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4775
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
lib/promscrape/discovery/kubernetes: supress context.Cancelled error in logs
It is possible that context.Cancelled will appear after k8s watcher was closed due to reload(see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4850).
Logging an error misinforms user and looks like vmagent discovery will stop working even though this does not affect discovery.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit 8d99c12a7d)
* lib/backup: fix issue with inconsistent copying of appliedRetention.txt
appliedRetention.txt can be modified in place, so it should be always copied just the same as parts.json
Updates: https://github.com/victoriaMetrics/victoriaMetrics/issues/5005
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs: add changelog entry for appliedRetention.txt copying fix
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage/partition: add check to ensure parts exist on disk
If part exists in parts.json but is missing on disk there will be a misleading error similar to "unexpected number of substrings in the part name".
This change forces verification of part existence and throws a correct error in case it is missing on disk.
Such issue can be result of https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5005 or disk corruption.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage/partition: use filepath.Join instead of string concatenation
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage/partition: add action points for error message
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* all: add a check for missing part in lib/mergeset and lib/logstorage
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Move the bugfix description to the correct place in docs/CHANGELOG.md
- Prevent from logging of 'context canceled' errors after the url watcher is stopped,
since these errors are expected and may confuse users.
- Remove unused urlWatcher.refCount field.
- Remove unused urlWatcher.close() method.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4850
* lib/promscrape/discovery/kubernetes: fix leaking api watcher
goroutine which was polling k8s API had no execution control. This leaded to leaking goroutines during config reload.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4850
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape/discovery/kubernetes: use reference counting for urlWatcher cleanup
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape/discovery/kubernetes: remove waitgroup sync for goroutines polling API server
This is unnecessary since context will is cancelled and new requests will not be sent. Also, using waitgroup will increase time required to perform reload which might result in missed scrapes.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape/discovery/kubernetes: clarify comment
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Apply suggestions from code review
* lib/promscrape/discovery/kubernetes: address review feedback
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
* lib/backup: force copying of parts.json
Copying of parts.json is required because `part.key()` comparison can create same key value for files with different contents. This will result in inconsistent backup being created or restored.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5005
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/backup: ensure parts.json is only copied once
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
This should prevent from emitting too long lines when too long args are passed to logger.* functions.
For example, too long MetricsQL queries or too long data samples.
* Introduce flagutil.Duration
To avoid conversion bugs
* Fix tests
* Clarify documentation re. month=31 days
* Add fasttime.UnixTime() to obtain time.Time
The goal is to refactor out the last usage of `.Msecs`.
* Use fasttime for time.Now()
* wip
- Remove fasttime.UnixTime(), since it doesn't improve code readability and maintainability
- Run `make docs-sync` for syncing changes from README.md to docs/ folder
- Make lib/flagutil.Duration.Msec private
- Rename msecsPerMonth const to msecsPer31Days in order to be consistent with retention31Days
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/vmselectapi: do not send empty label names for labelNames request
it breaks cluster communication, since vmselect incorrectly reads request buffer, leaving unread data on it
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4932
* typo fix
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Disallow parsing multitenant token at auth.NewToken().
Use auth.NewTokenPossibleMultitenant() at vminsert only. All the other callers should call auth.NewToken(),
since they do not support multitenant token.
This is a follow-up for f0c06b428e
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4910
- Document the change at docs/CHANGELOG.md
- Set the default value for -vmstorageUserTimeout to 3 seconds. This is much better
than the 0 value, which means that TCP connection to unreachable vmstorage could block
for up to 16 minutes.
- Document -vmstorageUserTimeout at docs/Cluster-VictoriaMetrics.md
`TCP_USER_TIMEOUT` (since Linux 2.6.37) specifies the maximum amount of
time that transmitted data may remain unacknowledged before TCP will
forcibly close the connection and return `ETIMEDOUT` to the application.
Setting a low TCP user timeout allows RPC connections quickly reroute
around unavailable storage nodes during network interruptions.
`-promscrape.cluster.membersCount` by default should be `1`, like every
single vmagent is a cluster of one member on its own.
The change additionally validates that user can't set `-promscrape.cluster.membersCount`
to value lower than `1`.
eabcfc9bcd
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The previous code could result in the following data race:
1. The s.ptwHot partition is marked to be deleted
2. ptw.decRef() is called on it
3. ptw.pt is set to nil
4. s.ptwHot.pt is accessed from concurrent goroutine, which leads to panic.
The change clears s.ptwHot under s.partitionsLock in order to prevent from the data race.
This is a follow-up for 8d50032dd6
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4895
Initially, stream parse mode was reading data from response and parsing it on flight. This was causing longer delay to read the whole response and required increasing timeout value to allow data processing while reading. So that 908e35affd increased timeout value to fix this.
But after 74c00a8762 response in stream parse mode is saved into memory and then parsed eliminating necessity of having timeout value higher that for usual scrape.
Updates: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4847
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit 6e8611f301)
Opentelemetry format allows histograms with non-counter buckets. In this case it makes no sense to add buckets into database
and save only counter with _count suffix.
It could be used as gauge.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4814
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/promrelabel: fix relabeling if clause being applied to labels outside of current context
Relabeling is applied to each metric row separately, but in order to lower amount of memory allocations it is reusing labels.
Functions which are working on current metric row labels are supposed to use only current metric labels by using provided offset, but if clause matcher was using the whole labels set instead of local metrics.
This leaded to invalid relabeling results such as one described here: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4806
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/CHANGELOG.md: document the bugfix
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1998
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4806
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* app/vmbackupmanager/storage: fix path join for windows
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4704
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/backup: fixes for windows support
- close dir before running os.RemoveAll. Windows FS does not allow to delete directory before all handles will be closed.
- add path "normalization" for local FS to use the same format of paths for both *unix and Windows
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4704
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Revert "vmalert: unittest support stale datapoint (#4696)"
This reverts commit 0b44df7ec8.
* Revert "docs: specify min version and limitations for vmalert's unit tests"
This reverts commit a24541bd
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Revert "vmalert: init unit test (#4596)"
This reverts commit da60a68d
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docs: mention unittest revert in changelog
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 9f1b9b86cc)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/protoparser: adds opentelemetry parser
app/{vmagent,vminsert}: adds opentelemetry ingestion path
Adds ability to ingest data with opentelemetry protocol
protobuf and json encoding is supported
data converted into prometheus protobuf timeseries
each data type has own converter and it may produce multiple timeseries
from single datapoint (for summary and histogram).
only cumulative aggregationFamily is supported for sum(prometheus
counter) and histogram.
Apply suggestions from code review
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
updates deps
fixes tests
wip
wip
wip
wip
lib/protoparser/opentelemetry: moves to vtprotobuf generator
go mod vendor
lib/protoparse/opentelemetry: reduce memory allocations
* wip
- Remove support for JSON parsing, since it is too fragile and is rarely used in practice.
The most clients send OpenTelemetry metrics in protobuf.
The JSON parser can be added in the future if needed.
- Remove unused code from lib/protoparser/opentelemetry/pb and lib/protoparser/opentelemetry/proto
- Do not re-use protobuf message between ParseStream() calls, since there is high chance
of high fragmentation of the re-used message because of too complex nested structure of the message.
* wip
* wip
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Use a byte slice instead of a map for tracking indexes for matching series.
This improves performance, since access by slice index is faster than access by map key.
- Re-use the byte slice for tracking indexes for matching series.
This removes unnecessary memory allocations and improves stream aggregation performance a bit.
- Add an ability to return to the previous behvaiour by specifying -remoteWrite.streamAggr.dropInput command-line flag.
In this case all the input samples are dropped when stream aggregation is enabled.
- Backport the new stream aggregation behaviour from vmagent to single-node VictoriaMetrics when -streamAggr.config
option is set.
- Improve docs regarding this change at docs/CHANGELOG.md
- Document the new behavior at docs/stream-aggregation.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4243
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4575
* {lib/streamaggr,vmagent/remotewrite}: breaking change for keepInput flag
Changes default behaviour of keepInput flag to write series which did not match any aggregators to the remote write.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4243
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Update app/vmagent/remotewrite/remotewrite.go
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Previously all the incoming samples were de-duplicated, even if their series doesn't
match aggregation rule filters. This could result in increased CPU usage.
Now the de-duplication isn't applied to samples for series, which do not match
aggregation rule filters. Such samples are just ignored.
* lib/storage: pre-create timeseries before indexDB rotation
during an hour before indexDB rotation start creating records at the next indexDB
it must improve performance during switch for the next indexDB and remove ingestion issues.
Since there is no need for creation new index records for timeseries already ingested into current indexDB
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4563
* lib/storage: further work on indexdb rotation optimization
- Document the change at docs/CHAGNELOG.md
- Move back various caches from indexDB to Storage. This makes the change less intrusive.
The dateMetricIDCache now takes into account indexDB generation, so it stores (date, metricID)
entries for both the current and the next indexDB.
- Consolidate the code responsible for idbNext pre-filling into prefillNextIndexDB() function.
This improves code readability and maintainability a bit.
- Rewrite and simplify the code responsible for calculating the next retention timestamp.
Add various tests for corner cases of this code.
- Remove indexdb pre-filling from RegisterMetricNames() function, since this function is rarely called.
It is OK to add indexdb entries on demand in this function. This simplifies the code.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401
* docs/CHANGELOG.md: refer to https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4563
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Round staleness_interval durations to the upper number of seconds.
This should prevent from under-calculations for fractional staleness intervals.
- Rename stalenessInterval field at *AggrState structs into stalenessSecs, since it holds seconds.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4667
- Improve docs
- Hide `debug relabeling` column when -promscrape.dropOriginalLabels command-line flag is set
- Inline the code from the added template functions, since the code is harder to follow
with the template functions, especially when these functions have misleading names.
Also, these functions are used only in one place, e.g. they do not reduce the amounts of code.
- Hide `click to show original labels` title at `labels` column when original labels aren't available.
- Show the reason on whey original labels aren't available at /service-discovery page.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4597
- Parse protobuf if Content-Type isn't set to `application/json` - this behavior is documented at https://grafana.com/docs/loki/latest/api/#push-log-entries-to-loki
- Properly handle gzip'ped JSON requests. The `gzip` header must be read from `Content-Encoding` instead of `Content-Type` header
- Properly flush all the parsed logs with the explicit call to vlstorage.MustAddRows() at the end of query handler
- Check JSON field types more strictly.
- Allow parsing Loki timestamp as floating-point number. Such a timestamp can be generated by some clients,
which store timestamps in float64 instead of int64.
- Optimize parsing of Loki labels in Prometheus text exposition format.
- Simplify tests.
- Remove lib/slicesutil, since there are no more users for it.
- Update docs with missing info and fix various typos. For example, it should be enough to have `instance` and `job` labels
as stream fields in most Loki setups.
- Allow empty of missing timestamps in the ingested logs.
The current timestamp at VictoriaLogs side is then used for the ingested logs.
This simplifies debugging and testing of the provided HTTP-based data ingestion APIs.
The remaining MAJOR issue, which needs to be addressed: victoria-logs binary size increased from 13MB to 22MB
after adding support for Loki data ingestion protocol at https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4482 .
This is because of shitty protobuf dependencies. They must be replaced with another protobuf implementation
similar to the one used at lib/prompb or lib/prompbmarshal .
* app/vmagent: fix creating target id if `--promscrape.dropOriginalLabels` flag was used
* app/vmagent: hide links if OriginalLabels was dropped
* app/vmagent: update CHANGELOG.md and added information to the docs
* app/vmagent: fix comments
* app/vlinsert: add support of loki push protocol
- implemented loki push protocol for both Protobuf and JSON formats
- added examples in documentation
- added example docker-compose
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vlinsert: move protobuf metric into its own file
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* deployment/docker/victorialogs/promtail: update reference to docker image
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* deployment/docker/victorialogs/promtail: make volume name unique
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vlinsert/loki: add license reference
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* deployment/docker/victorialogs/promtail: fix volume name
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/VictoriaLogs/data-ingestion: add stream fields for loki JSON ingestion example
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vlinsert/loki: move entities to places where those are used
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vlinsert/loki: refactor to use common components
- use CommonParameters from insertutils
- stop ingestion after first error similar to elasticsearch and jsonline
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vlinsert/loki: address review feedback
- add missing logstorage.PutLogRows calls
- refactor tenant ID parsing to use common function
- reduce number of allocations for parsing by reusing logfields slices
- add tests and benchmarks for requests processing funcs
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
This eliminates the need in .(*T) casting for results obtained from Load()
Leave atomic.Value for map, since atomic.Pointer[map[...]...] makes double pointer to map,
because map is already a pointer type.
* feat: add page to display a list of active queries (#4598)
* app/vmagent: code formatting
* fix: remove console
---------
Co-authored-by: dmitryk-dk <kozlovdmitriyy@gmail.com>
The following syntax is supported: _time:filter offset off
For example:
- _time:5m offset 1h - 5-minute duration one hour before the current time
- _time:2023 offset 2w - 2023 year with the 2 weeks offset in the past
- Sort MetricName tags only once before the benchmark loop.
- Obtain indexSearch per each benchmark loop in order to give a chance for background merge
for the recently created parts
Previously all the newly ingested time series were registered in global `MetricName -> TSID` index.
This index was used during data ingestion for locating the TSID (internal series id)
for the given canonical metric name (the canonical metric name consists of metric name plus all its labels sorted by label names).
The `MetricName -> TSID` index is stored on disk in order to make sure that the data
isn't lost on VictoriaMetrics restart or unclean shutdown.
The lookup in this index is relatively slow, since VictoriaMetrics needs to read the corresponding
data block from disk, unpack it, put the unpacked block into `indexdb/dataBlocks` cache,
and then search for the given `MetricName -> TSID` entry there. So VictoriaMetrics
uses in-memory cache for speeding up the lookup for active time series.
This cache is named `storage/tsid`. If this cache capacity is enough for all the currently ingested
active time series, then VictoriaMetrics works fast, since it doesn't need to read the data from disk.
VictoriaMetrics starts reading data from `MetricName -> TSID` on-disk index in the following cases:
- If `storage/tsid` cache capacity isn't enough for active time series.
Then just increase available memory for VictoriaMetrics or reduce the number of active time series
ingested into VictoriaMetrics.
- If new time series is ingested into VictoriaMetrics. In this case it cannot find
the needed entry in the `storage/tsid` cache, so it needs to consult on-disk `MetricName -> TSID` index,
since it doesn't know that the index has no the corresponding entry too.
This is a typical event under high churn rate, when old time series are constantly substituted
with new time series.
Reading the data from `MetricName -> TSID` index is slow, so inserts, which lead to reading this index,
are counted as slow inserts, and they can be monitored via `vm_slow_row_inserts_total` metric exposed by VictoriaMetrics.
Prior to this commit the `MetricName -> TSID` index was global, e.g. it contained entries sorted by `MetricName`
for all the time series ever ingested into VictoriaMetrics during the configured -retentionPeriod.
This index can become very large under high churn rate and long retention. VictoriaMetrics
caches data from this index in `indexdb/dataBlocks` in-memory cache for speeding up index lookups.
The `indexdb/dataBlocks` cache may occupy significant share of available memory for storing
recently accessed blocks at `MetricName -> TSID` index when searching for newly ingested time series.
This commit switches from global `MetricName -> TSID` index to per-day index. This allows significantly
reducing the amounts of data, which needs to be cached in `indexdb/dataBlocks`, since now VictoriaMetrics
consults only the index for the current day when new time series is ingested into it.
The downside of this change is increased indexdb size on disk for workloads without high churn rate,
e.g. with static time series, which do no change over time, since now VictoriaMetrics needs to store
identical `MetricName -> TSID` entries for static time series for every day.
This change removes an optimization for reducing CPU and disk IO spikes at indexdb rotation,
since it didn't work correctly - see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401 .
At the same time the change fixes the issue, which could result in lost access to time series,
which stop receving new samples during the first hour after indexdb rotation - see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698
The issue with the increased CPU and disk IO usage during indexdb rotation will be addressed
in a separate commit according to https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401#issuecomment-1553488685
This is a follow-up for 1f28b46ae9
The number of parts in the snapshot partition may be zero if concurrent goroutine just
started creating new partition, but didn't put data into it yet when the current
goroutine made a snapshot.
* docs: make `httpAuth.*` flags description less ambiguous
Currently, it may confuse users whether `httpAuth.*` flags are used by HTTP client or server configuration(see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4586 for example).
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs: fix a typo
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* fix removing storage data dir before restoring from backup
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fix review comment
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fix review comment
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fixes after merge with `enterprise-single-node` branch
Signed-off-by: Alexander Marshalov <_@marshalov.org>
---------
Signed-off-by: Alexander Marshalov <_@marshalov.org>
The validation was needed for covering corner cases when storage is tested with data from 1970.
This resulted into unexpected search results, as year was parsed incorrectly from the given timestamp.
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* lib/storage: creates parts.json on start-up if it not exists.
It fixes migrations from versions below v1.90.0.
Previously parts.json was created only after successful merge.
But if merge was interruped for some reason (OOM or shutdown), parts.json wasn't created and partitions left after interruped merge weren't properly deleted.
Since VM cannot check if it must be removed or not.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4336
* Apply suggestions from code review
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* Update lib/storage/partition.go
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
This is a followup for https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4418 to also handle "connection reset by peer" errors in connection handling logic.
This error can be triggered just the same as described in original PR: when query was closed on vmselect side and connection has been interrupted.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
This error may be wrapped in another error, and should normally be tested using
`errors.Is(err, net.ErrClosed)`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This error may be wrapped in another error, and should normally be tested using
`errors.Is(err, net.ErrClosed)`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit dfe53a36fc)
The "broken pipe" error is emitted when the connection has been interrupted abruptly.
It could happen due to unexpected network glitch or because connection was
interrupted by remote client. In both cases, remote client will notice
connection breach and handle it on its own. No need in logging this error
on both: server and client side.
This change should reduce the amount of log noise on vmstorage side. In the same time,
it is not expected to lose any information, since important logs should be still
emitted by the vmselect.
To conduct an experiment for testing this change see the following instructions:
1. Setup vmcluster with at least 2 storage nodes, 1 vminsert and 1 vmselect
2. Run vmselect with complexity limit checked on the client side: `-search.maxSamplesPerQuery=1`
3. Ingest some data and query it back: `count({__name__!=""})`
4. Observe the logs on vmselect and vmstorage side
Before the change, vmselect will log message about complexity limits exceeded. When this happens,
vmselect closes network connections to vmstorage nodes signalizing that it doesn't expect any data back.
Both vmstorage processes will try to push data to the connection and will fail with "broken pipe" error,
means that vmselect closed the connection.
After the change, vmstorages should remain silent. And vmselect will continue emittin the error message
about complexity limits exceeded.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This reverts the following commits:
- e0e16a2d36
- 2ce02a7fe6
The reason for revert: the updated logic breaks assumptions made
when fixing https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698 .
For example, if a time series stop receiving new samples during the first
day after the indexdb rotation, there are chances that the time series
won't be registered in the new indexdb. This is OK until the next indexdb
rotation, since the time series is registered in the previous indexdb,
so it can be found during queries. But the time series will become invisible
for search after the next indexdb rotation, while its data is still there.
There is also incompletely solved issue with the increased CPU and disk IO resource
usage just after the indexdb rotation. There was an attempt to fix it, but it didn't fix
it in full, while introducing the issue mentioned above. See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401
TODO: to find out the solution, which simultaneously solves the following issues:
- increased memory usage for setups high churn rate and long retention (e.g. what the reverted commit does)
- increased CPU and disk IO usage during indexdb rotation ( https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401 )
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698
- Document the change at docs/CHANGELOG.md
- Clarify comments for non-trivial code touched by the commit
- Improve the logic behind maybeCreateIndexes():
- Correctly create per-day indexes if the indexdb rotation is performed during
the first hour or the last hour of the day by UTC.
Previously there was a possibility of missing index entries on that day.
- Increase the duration for creating new indexes in the current indexdb for up to 22 hours
after indexdb rotation. This should reduce the increased resource usage
after indexdb rotation.
It is safe to postpone index creation for the current day until the last hour
of the current day after indexdb rotation by UTC, since the corresponding (date, ...)
entries exist in the previous indexdb.
- Search for TSID by (date, MetricName) in both the current and the previous indexdb.
Previously the search was performed only in the current indexdb. This could lead
to excess creation of per-day indexes for the current day just after indexdb rotation.
- Search for (date, metricID) entries in both the current and the previous indexdb.
Previously the search was performed only in the current indexdb. This could lead
to excess creation of per-day indexes for the current day just after indexdb rotation.
The new index substitutes global MetricName=>TSID index
used for locating TSIDs on ingestion path.
For installations with high ingestion and churn rate, global
MetricName=>TSID index can grow enormously making
index lookups too expensive. This also results into bigger
than expected cache growth for indexdb blocks.
New per-day index supposed to be much smaller and more efficient.
This should improve ingestion speed and reliability during
re-routings in cluster.
The negative outcome could be occupied disk size, since
per-day index is more expensive comparing to global index.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/storage: follow-up after a50d63c376
- ensure retentionMsecs is rounded to day
- remove localTimeOffset in test as localOffset is ignored when using `UnixMilli`
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage: restore retention timezone offset effect on retention deadline
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
previously during sync for mutable and immutable cache parts, link for hotEntry with current date may be not properly updated
it corrupts cache for backfilling metrics and increased cpu load
When using `retentionTimezoneOffset` and having local timezone being more than 4 hours different from UTC indexdb retention calculation could return negative value. This caused indexdb rotation to get in loop.
Fix calculation of offset to use `retentionTimezoneOffset` value properly and add test to cover all legit timezone configs.
See:
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4207
- https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4206
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
Windows doesn't allow to remove dir with opened files. Usually it's a case for snapshots, hard cannot be removed if file is openned.
With this change, dir will be renamed and properly deleted at the next process start.
It's recommended to restart vmstorage/vmsingle for snapshots deletion completion periodically.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70
* lib/promscrape/discovery/kubernetes: add common labels to all ports discovered from endpoints
Sets
`__meta_kubernetes_endpoints_name` and `__meta_kubernetes_namespace` labels to all ports of pod.
Prometheus sets those labels to all ports in pod (0ab9553611/discovery/kubernetes/endpoints.go (L267C15-L269)) even if port is not matching any service.
See: #4154
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape/discovery/kubernetes: fix test for updated discovery logic
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
This reverts commit 9e99f2f5b3.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4068
Reason for revert: this breaks valid use cases:
- If timestamps aren't specified in the incoming samples on purpose. For example, if stream aggregation is used
as StatsD replacement. StatsD protocol has no timestamp concept for incoming samples.
See https://github.com/b/statsd_spec
- If all the samples must be aggregated, even if they contain stale timestamps.
for example, if the stream aggregation produces some counter of some events,
it may be better to count all the events even if they were delayed before
being ingested into VictoriaMetrics.
Is is also unclear how to determine whether the sample becomes stale.
For example, if the aggregation interval equals to 1h, and the previous
aggregation cycle just finished 10 minutes ago, what to do with the newly
incoming sample with the timestamp 30 minutes older than the current time?
The answer highly depends on the context, so it is unsafe to uncoditionally
use a single logic for dropping the old samples here.
* lib/streamaggr: discard samples with timestamps not matching aggregation interval
Samples with timestamps lower than `now - aggregation_interval` are likely to be written via backfilling and should not be used for calculation of aggregation.
See #4068
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/streamaggr: make log message more descriptive, fix imports
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape: adds filter for consul_sd_configs:
it allows advanced filtering for consul service discovery requests
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4183
* typo fix
* removes deprecation mentions since it's not relevant
* Update docs/CHANGELOG.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* app/vmagent,lib/persistentqueue: show warning message if `--remoteWrite.maxDiskUsagePerURL` flag lower than 500MB
* app/vmagent,lib/persistentqueue: linter fix
* app/vmagent,lib/persistentqueue: fix comment
* lib/httpserver: introduce `-http.maxConcurrentRequests` command-line flag
Introduce `-http.maxConcurrentRequests` command-line flag to protect
VM components from resource exhaustion during unexpected spikes of HTTP requests.
By default, the new flag's value is set to 0 which means no limits are applied.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/httpserver: mention http.maxConcurrentRequests in docs
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This handler will instruct search engines that indexing is not allowed for the content exposed to the internet. This should help to address issues like #4128 when instances are exposed to the internet without authentication.
Callers of OpenStorage() log the returned error and exit.
The error logging and exit can be performed inside MustOpenStorage()
alongside with printing the stack trace for better debuggability.
This simplifies the code at caller side.
Use fs.MustReadDir() instead of os.ReadDir() across the code in order to reduce the code verbosity.
The fs.MustReadDir() logs the error with the directory name and the call stack on error
before exit. This information should be enough for debugging the cause of the error.
Callers of CreateFlockFile log the returned err and exit.
It is better to log the error inside the MustCreateFlockFile together with the path
to the specified directory and the call stack. This simplifies
the code at the callers' side while leaving the debuggability at the same level.
Callers of InitFromFilePart log the error and exit.
It is better to log the error with the path to the part and the call stack
directly inside the MustInitFromFilePart() function.
This simplifies the code at callers' side while leaving the same level of debuggability.
Callers of this function log the returned error and exit.
It is better logging the error together with the path to the filename
and call stack directly inside the function. This simplifies
the code at callers' side without reducing the level of debuggability
Callers of this function log the returned error and exit.
Let's log the error with the path to the filename and call stack
inside the function. This simplifies the code at callers' side
without reducing the level of debuggability.
- Add 'BUG:' prefix to error messages related to programming errors aka bugs.
- Consistently log the path to the file in all the messages in order to improve debuggability.
Callers of ReadFullData() log the error and then exit.
So let's log the error with the path to the filename and the call stack
inside MustReadData(). This simplifies the code at callers' side,
while leaving the debuggability at the same level.
Callers of these functions log the returned error and then exit.
Let's log the error with the call stack inside the function itself.
This simplifies the code at callers' side, while leaving the same
level of debuggability in case of errors.
Callers of this function log the returned error and then exit.
Let's log the error with the call stack inside the function itself.
This simplifies the code at callers' side, while leaving the same
level of debuggability in case of errors.
Callers of this function log the returned error and then exit.
Let's log the error with the call stack inside the function itself.
This simplifies the code at callers' side, while leaving the same
level of debuggability in case of errors.
Callers of this function log the returned error and exit.
So let's just log the error with the given filepath and the call stack
inside the function itself and then exit. This simplifies the code
at callers' place while leaves the same level of debuggability in case of errors.
Callers of these functions log the returned error and then exit. The returned error already contains the path
to directory, which was failed to be created. So let's just log the error together with the call stack
inside these functions. This leaves the debuggability of the returned error at the same level
while allows simplifying the code at callers' side.
While at it, properly use MustMkdirFailIfExist instead of MustMkdirIfNotExist inside inmemoryPart.MustStoreToDisk().
It is expected that the inmemoryPart.MustStoreToDick() must fail if there is already a directory under the given path.
When WriteFileAndSync fails, then the caller eventually logs the error message
and exits. The error message returned by WriteFileAndSync already contains the path
to the file, which couldn't be created. This information alongside the call stack
is enough for debugging the issue. So just use log.Panicf("FATAL: ...") inside MustWriteAndSync().
This simplifies error handling at caller side a bit.
This is a follow-up after 42bba64aa7
Previously the part directory listing was fsync'ed implicitly inside partHeader.WriteMetadata()
by calling fs.WriteFileAtomically(). Now it must be fsync'ed explicitly.
There is no need in fsync'ing the parent directory, since it is fsync'ed by the caller
when updating parts.json file.
Previously the created part directory listing was fsynced implicitly
when storing metadata.json file in it.
Also remove superflouous fsync for part directory listing,
which was called at blockStreamWriter.MustClose().
After that the metadata.json file is created, so an additional fsync
for the directory contents is needed.
Improperly configured -bigMergeConcurrency command-line flag usually leads to uncontrolled
growth of unmerged parts, which, in turn, increases CPU usage and query durations.
So it is better deprecating this flag. In rare cases -smallMergeConcurrency command-line flag
can be used instead for controlling the concurrency of background merges.
This makes it easier to understand exact point in time which is included in this backup.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
The logic employed for re-using the previously loaded scrape target was broken initially.
The commit cc0427897c tried to fix it, but the new logic
became too complex and fragile. So it is better to just remove this logic,
since the targets from temporarily broken file should be eventually loaded on next
attempts every -promscrape.fileSDCheckInterval
This also allows removing fragile hacks around __vm_filepath label.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3989
* lib/promscrape: fix the problem with scrape work duplicates when file_sd_config can't be read
* lib/promscrape: clarified comment
* lib/promscrape: made better approach to handle a problem with growing []*ScrapeWork on each error when loading config
* lib/promscrape: added CHANGELOG.md
* Update docs/CHANGELOG.md
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/storage: check for free disk space before opening tables
We check for free disk space before call to `openTable`,
so `Storage` can be set to ReadOnly before mergeWorkers start.
Before the change, there was a chance that merges will start
even if Storage has to start in ReadOnly mode because of
`-storage.minFreeDiskSpaceBytes` limit.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4023
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/storage: chore
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Update lib/storage/storage.go
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Make sure that the last successfully loaded config is used on hot-reload failure
- Properly cleanup resources occupied by already initialized aggregators
when the current aggregator fails to be initialized
- Expose distinct vmagent_streamaggr_config_reload* metrics per each -remoteWrite.streamAggr.config
This should simplify monitoring and debugging failed reloads
- Remove race condition at app/vminsert/common.MustStopStreamAggr when calling sa.MustStop() while sa
could be in use at realoadSaConfig()
- Remove lib/streamaggr.aggregator.hasState global variable, since it may negatively impact scalability
on system with big number of CPU cores at hasState.Store(true) call inside aggregator.Push().
- Remove fine-grained aggregator reload - reload all the aggregators on config change instead.
This simplifies the code a bit. The fine-grained aggregator reload may be returned back
if there will be demand from real users for it.
- Check -relabelConfig and -streamAggr.config files when single-node VictoriaMetrics runs with -dryRun flag
- Return back accidentally removed changelog for v1.87.4 at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3639
Verifying status code helps to avoid misleading errors caused by attempt to parse unsuccessful response.
Related issue: #4034
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
- Compare directory names instead of paths to directory when determining which persistent queues must be deleted
This is less error-prone solution, since paths to the same directory can differ, which could lead
to accidental directory removal for the existing -remoteWrite.url
- Log the `removed %d dangling queues` message when at least a single queue has been removed
- Consistently use filepath.Join() for creating paths to persistent queues.
This is needed for Windows support (see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70 )
- Clarify the description of the change at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4014
- Use windows.FlushFileBuffers() instead of windows.Fsync() at streamTracker.adviseDontNeed()
for consistency with implementations for other architectures.
- Use filepath.Base() instead of filepath.Split(), since the dir part isn't used.
This simplifies the code a bit.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70
This is a follow-up for 43b24164ef
* lib/fs: adds memory map for windows
it should improve performance for file reading
* lib/storage: replace '/' with os specific separator
it must fix an errors for windows
* lib/fs: mention windows fsync support
* lib/filestream: adds fdatasync for windows writes
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70
* allowed using dashes and dots in environment variables names for templating config files with envtemplate (#3999)
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* Apply suggestions from code review
---------
Signed-off-by: Alexander Marshalov <_@marshalov.org>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/netutil: log only parsing errors for proxy-protocol
Previosly every error was logged. With configured TCP health checks at load-balancer or kubernetes, vmauth spams a lot of false positive error message into logs
* Update docs/CHANGELOG.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* Update lib/netutil/tcplistener.go
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
This commit changes background merge algorithm, so it becomes compatible with Windows file semantics.
The previous algorithm for background merge:
1. Merge source parts into a destination part inside tmp directory.
2. Create a file in txn directory with instructions on how to atomically
swap source parts with the destination part.
3. Perform instructions from the file.
4. Delete the file with instructions.
This algorithm guarantees that either source parts or destination part
is visible in the partition after unclean shutdown at any step above,
since the remaining files with instructions is replayed on the next restart,
after that the remaining contents of the tmp directory is deleted.
Unfortunately this algorithm doesn't work under Windows because
it disallows removing and moving files, which are in use.
So the new algorithm for background merge has been implemented:
1. Merge source parts into a destination part inside the partition directory itself.
E.g. now the partition directory may contain both complete and incomplete parts.
2. Atomically update the parts.json file with the new list of parts after the merge,
e.g. remove the source parts from the list and add the destination part to the list
before storing it to parts.json file.
3. Remove the source parts from disk when they are no longer used.
This algorithm guarantees that either source parts or destination part
is visible in the partition after unclean shutdown at any step above,
since incomplete partitions from step 1 or old source parts from step 3 are removed
on the next startup by inspecting parts.json file.
This algorithm should work under Windows, since it doesn't remove or move files in use.
This algorithm has also the following benefits:
- It should work better for NFS.
- It fits object storage semantics.
The new algorithm changes data storage format, so it is impossible to downgrade
to the previous versions of VictoriaMetrics after upgrading to this algorithm.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3236
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3821
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70
lib{mergset,storage}: prevent possible race condition with logging stats for merges
Previously partwrapper could be release by background process and reference for part may be invalid
during logging stats. It will lead to panic at vmstorage
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3897
- Use flag.Duration instead of flagutil.Duration for -snapshotCreateTimeout,
since the flagutil.Duration is intended mostly for big durations, e.g. days, months and years,
while the -snapshotCreateTimeout is usually smaller than one hour.
- Add links to https://docs.victoriametrics.com/#how-to-work-with-snapshots in docs/CHANGELOG.md,
so readers could easily find the corresponding docs when reading the changelog.
- Properly remove all the created directories on unsuccessful attempt to create
snapshot in Storage.CreateSnapshot().
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3551
* lib/{fs,mergeset,storage}: skip `.must-remove.` dirs when creating snapshot (#3858)
* lib/{mergeset,storage}: add timeout configuration for snapshots creation, remove incomplete snapshots from storage
* docs: fix formatting
* app/vmstorage: add metrics to track status of snapshots
* app/vmstorage: use `vm_http_requests_total` metric for snapshot endpoints metrics, rename new flag to make name more clear
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmstorage: update flag name in docs
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmstorage: reflect new metrics names change in docs
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/promscrape: set `vm_promscrape_config_last_reload_successful` to 1 if there was no promscrape config provided
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape: register `vm_promscrape_config_*` metrics only in case promscrape config is used
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Return immediately on context cancel during the backoff sleep.
This should help with https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3747
- Add a comment describing why the second attempt to obtain the response from remote side
is perfromed immediately after the first attempt.
- Remove fasthttp dependency from lib/promscrape/discoveryutils
- Set context deadline before calling doRequestWithPossibleRetry().
This simplifies the doRequestWithPossibleRetry() a bit.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3293
* fix: do not use exponential backoff for first retry of scrape request (#3293)
* lib/promscrape: refactor `doRequestWithPossibleRetry` backoff to simplify logic
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Update lib/promscrape/client.go
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* lib/promscrape: refactor `doRequestWithPossibleRetry` to make it more straightforward
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* Modify API version when running in Container App
* Handle expires on from token response
Response from IMDS does not always contain expires in value which is
currently used to get the token expiry time. An example resources that
doesn't provide it are Container Apps and App Service.
Signed-off-by: Mattias Ängehov <mattias.angehov@castoredc.com>
* Fix client id parameter for user assigned identity
* Apply suggestions from code review
---------
Signed-off-by: Mattias Ängehov <mattias.angehov@castoredc.com>
Co-authored-by: Aliaksandr Valialkin <valyala@gmail.com>
- Do not generate __meta_server label, since it is unavailable in Prometheus.
- Add a link to https://docs.victoriametrics.com/sd_configs.html#kuma_sd_configs to docs/CHANGELOG.md,
so users could click it and read the docs without the need to search the corresponding docs.
- Remove kumaTarget struct, since it is easier generating labels for discovered targets
directly from the response returned by Kuma. This simplifies the code.
- Store the generated labels for discovered targets inside atomic.Value. This allows reading them
from concurrent goroutines without the need to use mutex.
- Use synchronouse requests to Kuma instead of long polling, since there is a little sense
in the long polling when the Kuma server may return 304 Not Modified response every -promscrape.kumaSDCheckInterval.
- Remove -promscrape.kuma.waitTime command-line flag, since it is no longer needed when long polling isn't used.
- Set default value for -promscrape.kumaSDCheckInterval to 30s in order to be consistent with Prometheus.
- Remove unnecessary indirections for string literals, which are used only once, in order to improve code readability.
- Remove unused fields from discoveryRequest and discoveryResponse.
- Update tests.
- Document why fetch_timeout and refresh_interval options are missing in kuma_sd_config.
- Add docs to discoveryutils.RequestCallback and discoveryutils.ResponseCallback,
since these are public types.
Side notes: it is weird that Prometheus implementation for kuma_sd_configs sets `instance` label,
since usually this label is set by the Prometheus itself to __address__ after the relabeling phase.
See https://www.robustperception.io/life-of-a-label/
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3389
See https://github.com/prometheus/prometheus/issues/7919
and https://github.com/prometheus/prometheus/pull/8844
as a reference implementation in Prometheus
`lib/protoparser/prometheus` is used by various applications,
such as `app/vmalert`. The recent change to the
`lib/protoparser/prometheus` package introduced a new dependency
of `lib/writeconcurrencylimiter` which exposes some metrics.
Because of the dependency, now all applications which have this
dependency also expose these metrics.
Creating a new `lib/protoparser/prometheus/stream` package helps
to remove these metrics from apps which use `lib/protoparser/prometheus`
as dependency.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3761
Signed-off-by: hagen1778 <roman@victoriametrics.com>
previously historical data backfilling may trigger force merge for previous month every hour
it consumes cpu, disk io and decrease cluster performance.
Following commit fixes it by applying deduplication for InMemoryParts
The limit has been increased from 300 bytes to 500 bytes according to the collected production stats.
This allows reducing CPU usage without significant increase of RAM usage in most practical cases.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3692
Switch to the actual API version `2016-11-15`,
since the old version doesn't provide access to all
the fields which implementation expects.
For example, old API missing `zone_id` field
in `DescribeAvailabilityZonesResponse` response.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3700
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Allow users fine-tuning the maximum string length for interning via -internStringMaxLen command-line flag.
This may be used for fine-tuning RAM vs CPU usage for certain workloads.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3692
- Call httpserver.GetQuotedRemoteAddr() and httpserver.GetRequestURI() only when the error occurs.
This saves CPU time on fast path when there are no parsing errors.
- Create a helper function - httpserver.LogError() - for logging the error with the request uri and remote addr context.
Stale series are sent when there is a difference between current
and previous scrapes. Those series which disappeared in the current scrape
are marked as stale and sent to the remote storage.
Sending stale series requires memory allocation and in case when too many
series disappear in the same it could result in noticeable memory spike.
For example, re-deploy of a big fleet of service can result into
excessive memory usage for vmagent, because all the series with old
pod name will be marked as stale and sent to the remote write storage.
This change limits the number of stale series which can be sent at once,
so memory usage remains steady.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3668https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3675
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This prevents vmbackup from leaking passwords into logs like shown below.
2023-01-11T15:00:01.050Z info VictoriaMetrics/lib/logger/flag.go:12 build version: vmbackup-20221214-211706-tags-v1.85.1-0-g09a70d3e9
2023-01-11T15:00:01.050Z info VictoriaMetrics/lib/logger/flag.go:13 command-line flags
2023-01-11T15:00:01.050Z info VictoriaMetrics/lib/logger/flag.go:20 -dst="fs:///vm-backups/latest"
2023-01-11T15:00:01.050Z info VictoriaMetrics/lib/logger/flag.go:20 -snapshot.createURL="http://user:super_sercret123@victoriametricspshot/create"
2023-01-11T15:00:01.050Z info VictoriaMetrics/lib/logger/flag.go:20 -storageDataPath="/storage"
2023-01-11T15:00:01.050Z info VictoriaMetrics/app/vmbackup/main.go:53 Snapshot create url http://user:super_sercret123@victoriametrics:8428/snapshot/create
2023-01-11T15:00:01.050Z info VictoriaMetrics/app/vmbackup/main.go:60 Snapshot delete url http://user:super_sercret123@victoriametrics:8428/snapshot/delete
Assisted merges are intended to be performed by goroutines, which accept the incoming samples,
in order to limit the data ingestion rate.
The worker, which converts pending samples to parts, shouldn't be penalized by assisted merges,
since this may result in increased number of pending rows as seen at https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3647#issuecomment-1385039142
when the assisted merge takes too much time.
- Document the fix at docs/CHANGELOG.md
- Limit the concurrency for sendStaleMarkers() function in order to limit its memory usage
when big number of targets disappear and staleness markers are sent
for all the metrics exposed by these targets.
- Make sure that the writeRequestCtx is returned to the pool
when there is no need to send staleness markers.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3668
- Add a comment describing the purpose of the `role` field inside `apiConfig` struct
- Revert changes at lib/promscrape/discovery/dockerswarm/dockerswarm.go ,
since they reduce code readability. E.g. the reader needs to look up the named string constants
in order to get their values.
vmselect passes query timeout to vmstorage in seconds.
The commit 20e9598254 treated it as timeout in nanoseconds.
Fix this in order to prevent from the following errors under vmstorage load:
cannot process vmselect request: cannot execute "search_v7": couldn't start executing the request in 0.000 seconds,
since -search.maxConcurrentRequests=... concurrent requests are already executed.
* {lib/server, app/}: use `httpAuth.*` flag as fallback for `*AuthKey` if it is not set
* lib/ingestserver/opentsdbhttp: fix opentdb HTTP handler not respecting `httpAuth.*` flags
* Apply suggestions from code review
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Use promutils.Labels.GetLabels() instead of comparing promutils.Labels.Labels to nil.
This make the code more consistent with other places.
- Mention the release where the issue has been introduced at docs/CHANGELOG.md.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3624