Aliaksandr Valialkin
2a45871823
lib/storage: add more fine-grained pace limiting for search
2020-07-23 19:26:08 +03:00
Aliaksandr Valialkin
6f05c4d351
lib/storage: improve prioritizing of data ingestion over querying
...
Prioritize also small merges over big merges.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/291
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/648
2020-07-23 13:23:36 +03:00
Aliaksandr Valialkin
e4303d3d21
lib/storage: prevent possible race condition when all the goroutines exit Storage.AddRows, before goroutines other goroutines are blocked on searchTSIDsCond inside Storage.searchTSIDs
...
This condition may occur after the following sequence of events:
1) A goroutine enters the loop body when len(addRowsConcurrencyCh) == cap(addRowsConcurrencyCh) inside Storage.searchTSIDs.
2) All the goroutines return from Storage.AddRows.
3) The goroutine from step 1 blocks on searchTSIDsCond.Wait() inside the loop body.
The goroutine remains blocked until the next call to Storage.AddRows, which calls searchTSIDsCond.Signal().
This may take indefinite time.
2020-07-22 21:52:34 +03:00
Aliaksandr Valialkin
d3442b40b2
lib/uint64set: optimize adding items to the set via Set.AddMulti
2020-07-21 20:56:59 +03:00
Aliaksandr Valialkin
e1107fec10
lib/storage: reset MetricName->TSID
cache after marking metricIDs as deleted
...
This is a follow-up commit after 12b16077c4
,
which didn't reset the `tsidCache` in all the required places.
This could result in indefinite errors like:
missing metricName by metricID ...; this could be the case after unclean shutdown; deleting the metricID, so it could be re-created next time
Fix this by resetting the cache inside deleteMetricIDs function.
2020-07-14 14:06:32 +03:00
Aliaksandr Valialkin
cb92113632
lib/storage: limit the maximum concurrency for data ingestion to GOMAXPROCS
...
Previously the concurrency has been limited to GOMAXPROCS*2. This had little sense,
since every call to Storage.AddRows is bound to CPU, so the maximum ingestion bandwidth
is achieved when the number of concurrent calls to Storage.AddRows is limited to the number of CPUs,
i.e. to GOMAXPROCS.
2020-07-08 17:32:18 +03:00
Aliaksandr Valialkin
32b9fb58b8
lib/storage: clarify out of retention period
error message by mentioning -retentionPeriod
command-line flag
2020-07-08 13:54:26 +03:00
Aliaksandr Valialkin
12b16077c4
lib/storage: reset MetricName->TSID cache after deleting time series
...
This should prevent from adding new data points to deleted time series
without the need to check for the deleted time series.
This improves ingestion performance a bit when the `deleted time series ids` aka `dmis` set
contains big number of time series.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/596
Based on the idea from @n4mine at https://github.com/VictoriaMetrics/VictoriaMetrics/pull/604
2020-07-06 22:01:08 +03:00
Aliaksandr Valialkin
6daa5f7500
lib/storage: prioritize data ingestion over heavy queries
...
Heavy queries could result in the lack of CPU resources for processing the current data ingestion stream.
Prevent this by delaying queries' execution until free resources are available for data ingestion.
Expose `vm_search_delays_total` metric, which may be used in for alerting when there is no enough CPU resources
for data ingestion and/or for executing heavy queries.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/291
2020-07-05 19:42:05 +03:00
Aliaksandr Valialkin
d5dddb0953
all: use %w instead of %s for wrapping errors in fmt.Errorf
...
This will simplify examining the returned errors such as httpserver.ErrorWithStatusCode .
See https://blog.golang.org/go1.13-errors for details.
2020-06-30 23:05:11 +03:00
Aliaksandr Valialkin
b19ca3eb5f
lib/storage: do not increment vm_slow_metric_name_loads_total
counter for metric_ids which shouldnt be prefetched, since this may mislead users
2020-05-16 10:21:17 +03:00
Aliaksandr Valialkin
82ffbcb9a6
app/vmstorage: add vm_slow_metric_name_loads_total
metric, which could be used as an indicator when more RAM is needed for improving query performance
2020-05-15 14:11:45 +03:00
Aliaksandr Valialkin
82ccdfaa91
app/vmstorage: add vm_slow_row_inserts_total
and vm_slow_per_day_index_inserts_total
metrics for determining whether VictoriaMetrics required more RAM for the current number of active time series
2020-05-15 13:44:32 +03:00
Aliaksandr Valialkin
4fc33163c4
lib/storage: optimize ingestion pefrormance for new time series
2020-05-15 13:24:37 +03:00
Aliaksandr Valialkin
8b32e7c3a0
lib/storage: reduce indentation in Storage.add
2020-05-15 13:24:37 +03:00
Aliaksandr Valialkin
1573ececb2
lib/storage: return the first error instead of the last error, since the first error usually points to the root cause
2020-05-15 13:24:37 +03:00
Aliaksandr Valialkin
0afd48d2ee
lib: extract common code for returning fast unix timestamp into lib/fasttime
2020-05-14 23:02:07 +03:00
Aliaksandr Valialkin
dbd0c552d5
lib/storage: gradually pre-populate per-day inverted index for the next day
...
This should prevent from CPU usage spikes at 00:00 UTC every day when
inverted index for new day must be quickly created for all the active time series.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/430
2020-05-12 12:13:05 +03:00
Aliaksandr Valialkin
364db13c9c
app/vmselect: add /api/v1/status/tsdb
page with useful stats for locating root cause for high cardinality issues
...
See https://prometheus.io/docs/prometheus/latest/querying/api/#tsdb-stats
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/425
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/268
2020-04-22 22:03:43 +03:00
Aliaksandr Valialkin
f3e0c55ea1
lib/storage: serialize snapshot creation process with mutex
...
This guarantees that the snapshot contains all the recently added data
from inmemory buffers when multiple concurrent calls to Storage.CreateSnapshot are performed.
2020-03-24 22:27:05 +02:00
Aliaksandr Valialkin
18af31a4c2
all: properly split vm_deduplicated_samples_total
among cluster components
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/345
2020-02-27 23:48:07 +02:00
Aliaksandr Valialkin
ce15cecae4
lib/storage: typo fix
2020-02-16 15:53:44 +02:00
Aliaksandr Valialkin
32e153e834
lib/storage: prevent from clobbering nin-nil lastError in Storage.add
2020-02-16 15:51:26 +02:00
Aliaksandr Valialkin
eceaf13e5e
lib/{storage,mergeset}: use time.Ticker instead of time.Timer where appropriate
...
It has been appeared that time.Timer was used in places where time.Ticker must be used instead.
This could result in blocked goroutines as in the https://github.com/VictoriaMetrics/VictoriaMetrics/issues/316 .
2020-02-13 13:10:07 +02:00
Aliaksandr Valialkin
2152f6f0cd
lib/storage: re-use indexSearch inside Storage.prefetchMetricNames
2020-01-31 01:16:53 +02:00
Aliaksandr Valialkin
d68546aa4a
lib/storage: pre-fetch metricNames for the found metricIDs in Search.Init
...
This should speed up Search.NextMetricBlock loop for big number of found time series.
2020-01-30 15:08:51 +02:00
Aliaksandr Valialkin
680080887d
all: consistently log durations in seconds with millisecond precision
...
This should improve logs readability
2020-01-22 18:28:27 +02:00
Aliaksandr Valialkin
605d588ba6
lib/uint64set: reduce memory usage in Union, Intersect and Subtract methods
...
Iterate items with newly added Set.ForEach method instead of allocating `[]uint64`
slice for all the items before the iteration.
2020-01-15 12:12:49 +02:00
Aliaksandr Valialkin
97f70ccda7
lib/storage: optimize bulk import performance when multiple data points are inserted for the same time series
...
This should speed up `/api/v1/import` and make it more scalable on multi-core systems.
2019-12-19 18:18:29 +02:00
Aliaksandr Valialkin
62a915f2b2
lib/storage: protect from time drift during indexdb rotation
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/248
2019-12-02 14:44:42 +02:00
Aliaksandr Valialkin
7a4635f853
all: remove the remaining mentions of cluster version
2019-11-21 23:18:22 +02:00
Aliaksandr Valialkin
119dfd01bb
lib/storage: add vm_cache_size_bytes{type="storage/hour_metric_ids"}
metric
2019-11-13 20:24:21 +02:00
Aliaksandr Valialkin
86a1cd700b
lib/storage: remove inmemory index for recent hour, since it uses too much memory
...
Production workload shows that the index requires ~4Kb of RAM per active time series.
This is too much for high number of active time series, so let's delete this index.
Now the queries should fall back to the index for the current day instead of the index
for the recent hour. The query performance for the current day index should be good enough
given the 100M rows/sec scan speed per CPU core.
2019-11-13 17:58:07 +02:00
Aliaksandr Valialkin
c57eb0ff83
lib/storage: add -disableRecentHourIndex
flag for disabling inmemory index for recent hour
...
This may be useful for saving RAM on high number of time series aka high cardinality
2019-11-13 15:02:51 +02:00
Aliaksandr Valialkin
ca259864e2
lib/storage: return back inmemory inverted index for recent hour
...
Issues fixed:
- Slow startup times. Now the index is loaded from cache during start.
- High memory usage related to superflouos index copies every 10 seconds.
2019-11-13 13:11:04 +02:00
Aliaksandr Valialkin
01bb3c06c7
lib/storage: remove inmemory inverted index for recent hours
...
Production load with >10M active time series showed it could
slow down VictoriaMetrics startup times and could eat
all the memory leading to OOM.
Remove inmemory inverted index for recent hours until thorough
testing on production data shows it works OK.
2019-11-13 10:45:53 +02:00
Oleg Kovalov
b4f44befa3
fix misspelled words ( #229 )
2019-11-12 00:16:42 +02:00
Aliaksandr Valialkin
8e8f98f712
lib/storage: add tests for dateMetricIDCache
2019-11-11 13:21:57 +02:00
Aliaksandr Valialkin
c342f5e37e
lib/storage: eliminate data race when updating lastSyncTime in dateMetricIDCache.Has
2019-11-10 22:04:01 +02:00
Aliaksandr Valialkin
ee7765b10d
lib/storage: implement per-day inverted index
2019-11-10 00:02:46 +02:00
Aliaksandr Valialkin
5810ba57c2
lib/storage: use specialized cache for (date, metricID) entries
...
This improves ingestion performance.
2019-11-09 23:06:11 +02:00
Aliaksandr Valialkin
9ea549ed24
lib/storage: sync with cluster changes
2019-11-08 21:21:07 +02:00
Aliaksandr Valialkin
d888b21657
lib/storage: add inmemory inverted index for the last hour
...
It should improve performance for `last N hours` dashboards with update intervals smaller than 1 hour.
2019-11-08 21:21:07 +02:00
Aliaksandr Valialkin
6be4456d88
lib/{storage,uint64set}: add Set.Union() function and use it
2019-11-04 00:44:37 +02:00
Aliaksandr Valialkin
e0b292c6de
lib/storage: small cleanup in Storage.add
2019-10-31 14:30:34 +02:00
hanzai
b3c946e35a
warns during rows addition ( #214 )
2019-10-20 23:41:07 +03:00
Aliaksandr Valialkin
97ce4e03a5
all: add support for GOARCH=386 and fix all the issues related to 32-bit architectures such as GOARCH=arm
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/212
2019-10-17 18:23:23 +03:00
Aliaksandr Valialkin
b986516fbe
lib/storage: create and use lib/uint64set
instead of map[uint64]struct{}
...
This should improve inverted index search performance for filters matching big number of time series,
since `lib/uint64set.Set` is faster than `map[uint64]struct{}` for both `Add` and `Has` calls.
See the corresponding benchmarks in `lib/uint64set`.
2019-09-24 21:17:55 +03:00
Aliaksandr Valialkin
c9063ece66
lib/storage: share tsids across all the partSearch instances
...
This should reduce memory usage when big number of time series matches the given query.
2019-09-23 22:35:15 +03:00
Aliaksandr Valialkin
0dc0006f34
lib/storage: calculate the maximum number of rows per small part from -memory.allowedPercent
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/159
This simplifies error detection additionally to the `vm_rows_ignored_total` counters.
2019-08-25 15:31:47 +03:00