Aliaksandr Valialkin
ee98f9ae66
lib/promscrape: use local scrape timestamp for scraped metrics unless honor_timestamps: true
is set explicitly
...
This fixes the case with gaps for metrics collected from cadvisor,
which exports invalid timestamps, which break staleness detection at VictoriaMetrics side.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4697 ,
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4697#issuecomment-1654614799
and https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4697#issuecomment-1656540535
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1773
2023-07-28 21:11:46 -07:00
Aliaksandr Valialkin
02ceebccc0
lib/promscrape: do not re-use previously loaded scrape targets on failed attempt to load updated scrape targets at file_sd_configs
...
The logic employed for re-using the previously loaded scrape target was broken initially.
The commit cc0427897c
tried to fix it, but the new logic
became too complex and fragile. So it is better to just remove this logic,
since the targets from temporarily broken file should be eventually loaded on next
attempts every -promscrape.fileSDCheckInterval
This also allows removing fragile hacks around __vm_filepath label.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3989
2023-04-02 21:11:12 -07:00
Aliaksandr Valialkin
97b41e727c
lib/promscrape: implement target-level and metric-level relabel debugging
...
Target-level debugging is performed by clicking the 'debug' link at the corresponding target
on either http://vmagent:8429/targets page or on http://vmagent:8428/service-discovery page.
Metric-level debugging is perfromed at http://vmagent:8429/metric-relabel-debug page.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3407
See https://docs.victoriametrics.com/vmagent.html#relabel-debug
2022-12-10 02:25:56 -08:00
Aliaksandr Valialkin
be6da5053f
lib/promscrape: optimize service discovery speed
...
- Return meta-labels for the discovered targets via promutils.Labels
instead of map[string]string. This improves the speed of generating
meta-labels for discovered targets by up to 5x.
- Remove memory allocations in hot paths during ScrapeWork generation.
The ScrapeWork contains scrape settings for a single discovered target.
This improves the service discovery speed by up to 2x.
2022-11-29 21:26:23 -08:00
Aliaksandr Valialkin
3b828535f0
lib/promscrape: allow controlling staleness tracking on a per-scrape_config basis
...
Add support for no_stale_markers option at scrape_config section.
See https://docs.victoriametrics.com/sd_configs.html#scrape_configs and
https://docs.victoriametrics.com/vmagent.html#prometheus-staleness-markers
2022-10-07 23:37:31 +03:00
Aliaksandr Valialkin
3987b0abd1
lib/promscrape: allow specifying full target url in __address__
label
...
Previously the `__address__` label could contain only `host:port` part of the target url,
while the scheme and metrics path were obtained from `__scheme__` and `__metrics_path__`
labels. Now it is possible to set the full url in `__address__` label.
This makes valid the following scrape config, which is frequently used by novice users:
scrape_configs:
- job_name: foo
static_configs:
- targets:
- http://host1/metrics1
- https://host2/metrics2
2022-10-07 22:46:29 +03:00
Aliaksandr Valialkin
735de9ee54
lib/promscrape: add external_labels
from global
section of -promscrape.config
after the relabeling is applied to the scraped metrics
...
This aligns with Prometheus behaviour.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3137
2022-10-01 16:15:00 +03:00
Aliaksandr Valialkin
b4bb1477fe
lib/regexutil: cache MatchString results for unoptimized regexps
...
This increases relabeling performance by 3x for unoptimized regexs
2022-09-30 12:28:25 +03:00
Aliaksandr Valialkin
86394b4179
lib/promscrape: optimize discoveryutils.SanitizeLabelName()
...
Cache sanitized label names and return them next time.
This reduces the number of allocations and speeds up the SanitizeLabelName()
function for common case when the number of unique label names is smaller than 100k
2022-08-27 00:18:19 +03:00
Aliaksandr Valialkin
ecc11dc32d
lib/promauth: refactor NewConfig in order to improve maintainability
...
1. Split NewConfig into smaller functions
2. Introduce Options struct for simplifying construction of the Config with various options
This commit is based on https://github.com/VictoriaMetrics/VictoriaMetrics/pull/2684
2022-07-04 14:31:43 +03:00
Aliaksandr Valialkin
3ae6300497
lib/promauth: add ability to send additional http headers in requests to scrape targets
...
This solves https://stackoverflow.com/questions/66032498/prometheus-scrape-metric-with-custom-header
2022-06-22 20:40:50 +03:00
Aliaksandr Valialkin
810dd74fb9
lib/promscrape: properly implement ScrapeConfig.clone()
...
Previously ScrapeConfig.clone() was improperly copying promauth.Secret fields -
their contents was replaced with `<secret>` value.
This led to inability to use passwords and secrets in `-promscrape.config` file.
The bug has been introduced in v1.77.0 in the commit 67b10896d2
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2551
2022-05-07 00:06:19 +03:00
Aliaksandr Valialkin
e9f08b1e6a
lib/promscrape/discovery/kubernetes: do not pre-allocate memory for ScrapeWork objects
...
There is high chance that ScrapeWork objects won't be generated because of relabeling
2022-04-20 16:42:41 +03:00
Aliaksandr Valialkin
909a3ee0e4
lib/promscrape: follow-up after 91e290a8ff
2022-04-20 16:12:26 +03:00
Aliaksandr Valialkin
45385a5dc6
lib/promscrape: optimize getScrapeWork() function
...
Reduce the number of memory allocations in this function. This improves its performance by up to 50%.
This should improve service discovery speed when big number of potential targets with big number of meta-labels
are generated by service discovery.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2270
2022-04-20 15:34:18 +03:00
Aliaksandr Valialkin
c50e48a74c
lib/promscrape: follow-up after baa1c24b36
2022-04-16 14:26:38 +03:00
Roman Khavronenko
791cad8c2e
lib/promscrape: support prometheus-like duration in scrape configs ( #2169 )
...
* lib/promscrape: support prometheus-like duration in scrape configs
The change allows to specify duration values like `1d`, `1w`
for fields `scrape_interval`, `scrape_timeout`, etc.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/817#issuecomment-1033384766
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/blockcache: make linter happy
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/promscrape: support prometheus-like duration in scrape configs
* add support for extra fields `scrape_align_interval` and `scrape_offset`;
* support Prometheus duration parsing for `__scrape_interval__`
and `__scrape_duration__` labels;
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
* wip
* docs/CHANGELOG.md: document the feature
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2022-02-11 16:17:51 +02:00
Aliaksandr Valialkin
847004fa77
app/{vminsert,vmagent}: hide passwords and auth tokens by default at /config
page
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1764
2021-11-05 14:42:13 +02:00
Aliaksandr Valialkin
fbcc8b5c7d
lib/promscrape: set honor_timestamps: true
by default if this option isnt set explicitly in scrape configs
...
This aligns the behavior to Prometheus - see https://prometheus.io/docs/prometheus/latest/configuration/configuration/#scrape_config
2021-10-16 20:48:53 +03:00
Aliaksandr Valialkin
279f37c9e7
lib/promscrape: make fmt
2021-09-12 13:35:21 +03:00
Aliaksandr Valialkin
6c97388dde
lib/promscrape: add ability to configure scrape_timeout and scrape_interval via relabeling
...
See https://github.com/prometheus/prometheus/pull/8911
2021-09-12 13:35:20 +03:00
Aliaksandr Valialkin
d613a018c8
lib/promscrape: add ability to set series_limit
and stream_parse
options via relabeling
...
This allows managing these options on a per-target basis.
Typical use case: to manage these options for pods via Kubernetes annotations.
2021-09-09 18:51:23 +03:00
Aliaksandr Valialkin
c4df601f43
lib/promscrape: add the ability to limit the number of unique series per each scrape target
...
The number of series per target can be limited with the following options:
* Global limit with `-promscrape.maxSeriesPerTarget` command-line option.
* Per-target limit with `max_series: N` option in `scrape_config` section.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1561
2021-09-01 16:08:12 +03:00
Aliaksandr Valialkin
7fdb4db73d
lib/promscrape: add ability to load scrape configs from multiple files
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1559
2021-08-26 08:51:53 +03:00
Aliaksandr Valialkin
1c12c0f79c
lib/promauth: reload TLS certificates from disk on every mTLS connection as Prometheus does
...
This allows updating client certificates without the need to restart vmagent and/or single-node VictoriaMetrics.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1420
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/470
2021-07-01 15:43:43 +03:00
Aliaksandr Valialkin
e08287f017
lib/promscrape: reload auth tokens from files every second
...
Previously auth tokens were loaded at startup and couldn't be updated without vmagent restart.
Now there is no need in vmagent restart.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1297
2021-05-14 20:03:35 +03:00
Aliaksandr Valialkin
e3f61d540b
lib/promscrape: limit scrape_timeout
by scrape_interval
like Prometheus does
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1281
2021-05-13 16:10:42 +03:00
Aliaksandr Valialkin
27d8a5d2c0
lib/promscrape: add tests for authorization
config, which has been added in df148f48b7
2021-04-03 22:14:03 +03:00
Aliaksandr Valialkin
2825a1e86d
lib/promscrape: add follow_redirect
option to scrape_configs
section like Prometheus does
...
See https://github.com/prometheus/prometheus/pull/8546
2021-04-02 21:20:37 +03:00
Aliaksandr Valialkin
60e0280a94
lib/promscrape: add ability to configure proxy options via proxy_tls_config
, proxy_basic_auth
, proxy_bearer_token
and proxy_bearer_token_file
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1116
2021-03-12 03:36:11 +02:00
Aliaksandr Valialkin
502fab797a
lib/promscrape: add scrape_offset
option to scrape_config
...
This option can be used for specifying the particular offset per each scrape interval for target scraping
2021-03-08 11:59:32 +02:00
Aliaksandr Valialkin
02c0959380
lib/promscrape: make cluster membership calculations consistent across 32-bit and 64-bit architectures
2021-03-05 09:06:08 +02:00
Aliaksandr Valialkin
133fb9fc00
lib/promscrape: add -promscrape.cluster.replicationFactor
command-line flag for replicating scrape targets among vmagent
instances in the cluster
2021-03-04 10:21:27 +02:00
Aliaksandr Valialkin
8af9370bf2
lib/promscrape: use target arg in ScrapeWork cache
2021-03-01 12:31:11 +02:00
Aliaksandr Valialkin
197ecca426
lib/promrelabel: add more optimizations for relabeling for common cases
2021-02-22 16:36:54 +02:00
Aliaksandr Valialkin
502d0e2524
lib/promscrape: add scrape_align_interval config option into scrape config
...
This option allows aligning scrapes to a particular intervals.
2021-02-18 23:53:04 +02:00
Aliaksandr Valialkin
1ee5a234dc
lib/promscrape: remove ID
field from ScrapeWork
struct. Use a pointer to ScrapeWork as a key in targetStatusMap
...
This simplifies the code a bit.
2020-12-17 14:31:55 +02:00
Aliaksandr Valialkin
38188e1d6b
lib/promscrape: store ScrapeWork items by pointer in the slice returned from get*ScrapeWork()
...
This should prevent from possible 'memory leaks' when a pointer to ScrapeWork item stored in the slice
could prevent from releasing memory occupied by all the ScrapeWork items stored in the slice when they
are no longer used.
See the related commit e205975716
and the related issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/825
2020-12-08 17:55:21 +02:00
Aliaksandr Valialkin
2ec02b7bdb
lib/promscrape: pre-allocate slice for discovered targets based on previously discovered targets
...
This should reduce load on GC a bit when discovering big number of scrape targets
2020-11-10 15:57:43 +02:00
Nikolay
058f49de57
adds leading forward slash check for scrapeURL path ( #855 )
...
* fixes in-consistency with prometheus behaviour for scrape targets url path.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/835
2020-11-01 23:22:16 +02:00
Aliaksandr Valialkin
ed724d25ba
lib/promscrape: add stream parse
mode for efficient scraping of targets that expose millions of metrics
2020-11-01 23:12:26 +02:00
Aliaksandr Valialkin
a93c62cd60
lib/promscrape: fix tests after 71ea4935de
2020-10-08 19:32:48 +03:00
Aliaksandr Valialkin
7505e4f390
lib/promrelabel: make a copy of label with new name for action: labelmap
in the same way as Prometheus does
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/812
2020-10-05 16:20:22 +03:00
Aliaksandr Valialkin
d4be3efc60
lib/promscrape: add a test for scrape config for blackbox exporter
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/684
2020-08-09 12:03:51 +03:00
Aliaksandr Valialkin
2361ad8ab4
lib/promscrape: add ability to set disable_compression
and disable_keepalive
options in scrape_config
section of the config passed to -promscrape.config
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/580
2020-07-02 14:19:34 +03:00
Aliaksandr Valialkin
d962568e93
all: use %w instead of %s for wrapping errors in fmt.Errorf
...
This will simplify examining the returned errors such as httpserver.ErrorWithStatusCode .
See https://blog.golang.org/go1.13-errors for details.
2020-06-30 23:33:46 +03:00
Aliaksandr Valialkin
de7e585ac8
lib/promscrape: preserve the previously discovered targets on discovery errors per each job_name
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/582
2020-06-23 15:42:46 +03:00
Aliaksandr Valialkin
2e5b6220a4
lib/promrelabel: allows regex capture groups in target_label like Prometheus does
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/569
2020-06-19 02:20:58 +03:00
Aliaksandr Valialkin
1f0e8fdc0d
lib/promscrape: fix tests after the commit 658a8742ac
...
The original commit copies `__address__` label to `instance` label when generating per-target labels as Prometheus does.
See https://www.robustperception.io/life-of-a-label for details.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/453
2020-05-03 16:59:29 +03:00
Aliaksandr Valialkin
f25416984b
lib/promscrape: fix TestGetFileSDScrapeWorkSuccess after 3b234d82e5
2020-05-03 14:31:20 +03:00