This eliminates the need in .(*T) casting for results obtained from Load()
Leave atomic.Value for map, since atomic.Pointer[map[...]...] makes double pointer to map,
because map is already a pointer type.
Error message will be present for any auth error, but message claims an error is about OAuth2 configuration which is confusing.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
app/vmagent/remotewrite: fix vmagent panic on shutdown
Currently, when vmagent is stopping it first flushes pending series in remote write context and proceeds to stop streaming aggregation. This leads to streaming aggregation being unable to write results into pending timeseries (since it is already nil) and panic.
This can lead to losing some aggregation results being lost almost silently.
The fix is reordering flow to first stop streaming aggregation and flush all pending time series after that.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit ce7141383d)
* app/vmagent,lib/persistentqueue: show warning message if `--remoteWrite.maxDiskUsagePerURL` flag lower than 500MB
* app/vmagent,lib/persistentqueue: linter fix
* app/vmagent,lib/persistentqueue: fix comment
Use fs.MustReadDir() instead of os.ReadDir() across the code in order to reduce the code verbosity.
The fs.MustReadDir() logs the error with the directory name and the call stack on error
before exit. This information should be enough for debugging the cause of the error.
- Make sure that the last successfully loaded config is used on hot-reload failure
- Properly cleanup resources occupied by already initialized aggregators
when the current aggregator fails to be initialized
- Expose distinct vmagent_streamaggr_config_reload* metrics per each -remoteWrite.streamAggr.config
This should simplify monitoring and debugging failed reloads
- Remove race condition at app/vminsert/common.MustStopStreamAggr when calling sa.MustStop() while sa
could be in use at realoadSaConfig()
- Remove lib/streamaggr.aggregator.hasState global variable, since it may negatively impact scalability
on system with big number of CPU cores at hasState.Store(true) call inside aggregator.Push().
- Remove fine-grained aggregator reload - reload all the aggregators on config change instead.
This simplifies the code a bit. The fine-grained aggregator reload may be returned back
if there will be demand from real users for it.
- Check -relabelConfig and -streamAggr.config files when single-node VictoriaMetrics runs with -dryRun flag
- Return back accidentally removed changelog for v1.87.4 at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3639
- Compare directory names instead of paths to directory when determining which persistent queues must be deleted
This is less error-prone solution, since paths to the same directory can differ, which could lead
to accidental directory removal for the existing -remoteWrite.url
- Log the `removed %d dangling queues` message when at least a single queue has been removed
- Consistently use filepath.Join() for creating paths to persistent queues.
This is needed for Windows support (see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70 )
- Clarify the description of the change at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4014
* vmagent: respect `-usePromCompatibleNaming` if no relabeling is set
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3493
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmagent: upd test
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This fixes handling of values bigger than 2GiB for the following command-line flags:
- -storage.minFreeDiskSpaceBytes
- -remoteWrite.maxDiskUsagePerURL
Sort labels explicitly after calling the ParsedConfigs.Apply() when needed.
This reduces CPU usage when performing metric-level relabeling, where labels' sorting isn't needed.
The standard Snappy encoder from github.com/golang/snappy shows quite good performance number
for compressing the Prometheus remote_write proto messages according to the added benchmarks,
so there is no need in switching to github.com/klauspost/compress/s2 yet.
ioutil.ReadAll is deprecated since Go1.16 - see https://tip.golang.org/doc/go1.16#ioutil
VictoriaMetrics requires at least Go1.18, so it is OK to switch from ioutil.ReadAll to io.ReadAll.
This is a follow-up for 02ca2342ab
The new metric `vmagent_remotewrite_queues` exports a static value of
number of configured remote write queus. This metric is useful to
calculate total saturation per each configured URL with given number
of queues. See corresponding changes to vmagent alerts and dashboard.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This adds the ability to utilize sigv4 signing for all AWS services not
just "aps". When the newly introduced property "service" is not set it
will default to "aps".
Signed-off-by: Boris Petersen <boris.petersen@idealo.de>
* {lib/promscrape,app/vmagent}: adds sigv4 support for vmagent remoteWrite
moves aws related code into separate lib from lib/promscrape
it allows to write data from vmagent to the AWS managed prometheus (cortex)
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1287
* Apply suggestions from code review
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This adds a metric for the rate limit.
The limit is present as a flag currently:
`flag{name="remoteWrite.rateLimit", value="500000", is_set="true"} 1`
We are running many instances of vmagent and when creating alerts it is harder than it needs to be when extracting the value from the flag.
With this change it should be easier to monitor how close to the limit we are.
`((100/vmagent_remotewrite_rate_limit{account="account"})*sum (rate(vmagent_remotewrite_conn_bytes_written_total{account="account"}))) and ON (account) flag{name="remoteWrite.rateLimit"} == 1`
The following actions are taken:
- Increase the TLS hashdshake timeout from 5 seconds to 10 seconds
- Increase dial timeout from 5 seconds to 30 seconds
- Specify DialContext instead of Dial in http.Transport. This allows properly handling
the Context arg during dialing the remote storage
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1699
* vmagent: add error log for skipped data block when rejected by receiving side
Previously, rejected data blocks were silently dropped - only metrics were update.
From operational perspective, having an additional logging for such cases is preferable.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1911
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmagent: throttle log messages about skipped blocks
The new type of logger was added to logger pacakge.
This new type supposed to control number of logged messages
by time.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/logger: make LogThrottler public, so its methods can be inspected by external packages
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This should improve the maximum data ingestion speed for highly-loaded vmagent instances
which run on beefy servers with many CPU cores and big amounts of RAM
The number of series per target can be limited with the following options:
* Global limit with `-promscrape.maxSeriesPerTarget` command-line option.
* Per-target limit with `max_series: N` option in `scrape_config` section.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1561
This metric can be used for determining high saturation of every connection to remote storage with
an alerting query `rate(vmagent_remotewrite_send_duration_seconds_total) > 0.9s`.
This query triggers when a connection is satureated by more than 90%
* feature: Add multitenant for vmagent
* Minor fix
* Fix rcs index out of range
* Minor fix
* Fix multi Init
* Fix multi Init
* Fix multi Init
* Add default multi
* Adjust naming
* Add TenantInserted metrics
* Add TenantInserted metrics
* fix: remove unused metrics for vmagent
* fix: remove unused metrics for vmagent
Co-authored-by: mghader <marc.ghader@ubisoft.com>
Co-authored-by: Sebastian YEPES <syepes@gmail.com>
* Change default value of '-remoteWrite.queues' to cgroup.AvailableCPUS() * 2 to reduce scrape interval
Default value of vmagent option '-remotewrite.queues' is 4 and default
size of vmagent ScheudleUnmarshalWorkers is number of CPUs, when available
CPUs is much greater than 4, e.g 32, worker are competing push queues
which will increase scrape interval and may cause scrape timeout.
* Update README and flag description
Co-authored-by: xiaozy <xiaozy01@fenbi.com>
* new feature: relabel logging
Use scrape_configs[x].relabel_debug = true to log metric names inkl.
labels before and after relabeling. After relabeling related metrics
get dropped, i.e. not submitted to servers.
* vminsert wants relabel logging, too.
These numbers are exposed via the following metrics:
- vmagent_hourly_series_limit_current_series
- vmagent_daily_series_limit_current_series
Expose also the limits via the following metrics:
- vmagent_hourly_series_limit_max_series
- vmagent_daily_series_limit_max_series
This should increase block sizes and subsequently increase the maximum possible bandwidth per each connection to remote storage.
This, in turn, should reduce the probability of storing the data in local buffers.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1235
This option can be useful when samples for the same time series are ingested with distinct order of labels.
For example, metric{k1="v1",k2="v2"} and metric{k2="v2",k1="v1"}.
