The main purpose of this command-line flag is to increase the lifetime of low-end flash storage
with the limited number of write operations it can perform. Such flash storage is usually
installed on Raspberry PI or similar appliances.
For example, `-inmemoryDataFlushInterval=1h` reduces the frequency of disk write operations
to up to once per hour if the ingested one-hour worth of data fits the limit for in-memory data.
The in-memory data is searchable in the same way as the data stored on disk.
VictoriaMetrics automatically flushes the in-memory data to disk on graceful shutdown via SIGINT signal.
The in-memory data is lost on unclean shutdown (hardware power loss, OOM crash, SIGKILL).
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3337
The recent change in modifying default value
of `datasource.queryStep` flag resulted in situation
where replay mode was always running queries with
step=`datasource.queryStep`. When it should always
use rule's evaluation interval.
The fix is related not to replay mode only, but
for all Range requests. Now step param is set
individually for each mode.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmalert: add `remoteWrite.sendTimeout` command-line flag to configure timeout for sending data to `remoteWrite.url`
* vmalert: remove WriteTimeout from clients Cfg
No need to have it as a part of configuration struct:
* the client isn't used by other packages;
* there are no internal tests to check the WriteTimeout.
* vmalert: remove DisablePathAppend from clients Cfg
No need to have it as a part of configuration struct:
* the client isn't used by other packages;
* there are no internal tests to check the DisablePathAppend.
Co-authored-by: hagen1778 <roman@victoriametrics.com>
- Return meta-labels for the discovered targets via promutils.Labels
instead of map[string]string. This improves the speed of generating
meta-labels for discovered targets by up to 5x.
- Remove memory allocations in hot paths during ScrapeWork generation.
The ScrapeWork contains scrape settings for a single discovered target.
This improves the service discovery speed by up to 2x.
* {app/vmstorage,app/vmselect}: add API to get list of existing tenants
* {app/vmstorage,app/vmselect}: add API to get list of existing tenants
* app/vmselect: fix error message
* {app/vmstorage,app/vmselect}: fix error messages
* app/vmselect: change log level for error handling
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
The default list of alerting rules contains the basic
rules for checking vmalert's health state and is recommended
to use for monitoring vmalert deployments.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The issue was in the `labels := dst[offset:]` line in the beginning of appendExtraLabels() function.
The `dst` may be re-allocated when adding extra labels to it. In this case the addition of `exported_`
prefix to labels inside `labels` slice become invisible in the returned `dst` labels.
While at it, properly handle some corner cases:
- Add additional `exported_` prefix to clashing metric labels with already existing `exported_` prefix.
- Store scraped metric names in `exported___name__` label if scrape target contains `__name__` label.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3278
Thanks to @jplanckeel for the initial attempt to fix this issue
at https://github.com/VictoriaMetrics/VictoriaMetrics/pull/3281
Previously the `quotesEscape` function was escaping only double quotes.
This wasn't enough, since the input string could contain other special chars,
which must be escaped when put inside JSON string. For example, carriage return and line feed chars (\n\r),
backslash char, etc. This led to the following issues, which were improperly fixed:
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/890 - this issue
was "fixed" by introducing the `crlfEscape` function, which led to unnecessary
complications in user templates, while not fixing various corner cases
such as backslash chars in the input string.
See 1de15ad490
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3139 - this issue
was "fixed" by urlencoding the whole string passed to -external.alert.source
command-line flag. This led to invalid urls, which couldn't be parsed by Grafana.
See 00c838353d
and 4bd0244599
This commit properly encodes the input string passed to `quotesEscape`, so it can be safely embedded inside JSON strings.
This commit deprecates crlfEscape template function and adds the following new template functions:
- strvalue and stripDomain - these functions are supported by Prometheus, so they were added
for compatibility purposes.
- jsonEscape and htmlEscape for converting the input string to valid quoted JSON string
and for html-escaping the input string, so it could be safely embedded as a plaintext
into html.
This commit also documents all supported template functions at https://docs.victoriametrics.com/vmalert.html#template-functions
The deprecated crlfEscape function isn't documented on purpose, since its usefulness is negative in general case.
This reverts commit 00c838353d.
Reason for revert: it incorrectly fixes the issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3139 .
Now `-external.alert.source=explore?orgId=1&left=...` is converted to the following invalid url, which cannot be handled by Grafana:
https://grafana.example.com/explore%3ForgId%3D1%26left%3D...
The next commit will contain the correct fix of the issue - the `quotesEscape` function must
properly escape the string, so it could be embedded into JSON string. This function must
properly escape \n\r chars too. In this case the `crlfEscape` function becomes unnecessary.
Actually, the next commit makes the `crlfEscape` function deprecated.
The searchTSIDs function was searching for metricIDs matching the the given tag filters
and then was locating the corresponding TSID entries for the found metricIDs.
The TSID entries aren't needed when searching for time series names (aka MetricName),
so this commit removes the uneeded TSID search from the implementation of /api/v1/series API.
This improves perfromance of /api/v1/series calls.
This commit also improves performance a bit for /api/v1/query and /api/v1/query_range calls,
since now these calls cache small metricIDs instead of big TSID entries
in the indexdb/tagFilters cache (now this cache is named indexdb/tagFiltersToMetricIDs)
without the need to compress the saved entries in order to save cache space.
This commit also removes concurrency limiter during searching for matching time series,
which was introduced in 8f16388428, since the concurrency
for all the read queries is already limited with -search.maxConcurrentRequests command-line flag.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/648
The message about dropped data still remains at `error` level.
The change supposed to make log message more clear about how
serious it is.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* feat: add maximum display series by tabs
* feat: add warning on PredefinedPanels.tsx
* docs/CHANGELOG.md: vmui limit number of plotted series
* docs/CHANGELOG.md: vmui limit number of plotted series
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Sort labels explicitly after calling the ParsedConfigs.Apply() when needed.
This reduces CPU usage when performing metric-level relabeling, where labels' sorting isn't needed.
Previously the `__address__` label could contain only `host:port` part of the target url,
while the scheme and metrics path were obtained from `__scheme__` and `__metrics_path__`
labels. Now it is possible to set the full url in `__address__` label.
This makes valid the following scrape config, which is frequently used by novice users:
scrape_configs:
- job_name: foo
static_configs:
- targets:
- http://host1/metrics1
- https://host2/metrics2
* Optimize fast path for /api/v1/import when importing numeric values
* Move the docs about the change from features to bugfixes at docs/CHANGELOG.md
* Update tests at lib/protoparser/vmimport
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3161
* app/vmselect: properly work when export import json from `api/v1/{export, import}` API
* app/vmselect: update convert function
* app/vmselect: export null if `math.IsNaN(v)`
* app/vmselect: get float from json
* lib/protoparser: add test
* docs: add change log
* lib/protoparser: make export import api compatible
* Document the addition of Azure blob storage support in vmbackup / vmrestore
* List the supported storage system types at docs/vmrestore.md
* Mention about azblob storage system support at -src and -dst command-line flags
for vmbackup / vmrestore tools.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1029
The change is supposed to provide additional flexibility for generating alert's
source link based on label values.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
