This allows removing importing unneeded command-line flags into binaries, which import lib/storage,
which, in turn, was importing lib/snapshot in order to use Time, Validate and NewName functions.
This is a follow-up for 83e55456e2
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5738
Closing client connections every 2 minutes doesn't help load balancing -
this just leads to "jumpy" connections between multiple backend servers,
e.g. the load isn't spread evenly among backend servers, and instead jumps
between the servers every 2 minutes.
It is still possible periodically closing client connections by specifying non-zero -http.connTimeout command-line flag.
This should help with https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1304#issuecomment-1636997037
This is a follow-up for d387da142e
There is no sense in storing commonPrefix for blockHeader containing only a single item,
since this only increases blockHeader size without any benefits.
This panic could occur when samples with too long label values are ingested into VictoriaMetrics.
This could result in too long fistItem and commonPrefix values at blockHeader (up to 64kb each).
This may inflate the maximum index block size by 4 * maxIndexBlockSize.
For example, -fooDuration=',10s,' is now supported - it sets three command-line flag values:
- the first and the last one are set to the default value for `-fooDuration`
- the second one is set to 10s
This should significantly reduce the number of open ReaderAt files
on VictoriaMetrics and VictoriaLogs startup.
The open files can be tracked via vm_fs_readers metric
GOGC can be already set via environment variable. There is no need in adding
new approaches for setting the GOGC (such as command-line flag), since they complicate operations.
Remove temporary file before closing it in order to signal the OS that it shouldn't
store the file contents from page cache to disk when the file is closed.
Gracefully handle the case when the file cannot be removed before being closed -
in this case remove the file after closing it. This allows working on Windows.
Also remove superflouos opening of temporary file for reading - re-use already opened file handle for writing.
This is a follow-up for 9b1e002287
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4020
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70
The easyproto-based marshaler is 2x slower than the previous custom marshaler,
so let's stick with it. This improves the performance for sending data to remote storage at vmagent
and reduces CPU usage to pre-v1.97.0 levels.
* adding support for username_file in basic_auth of scrape config
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
* adding support for username_file in basic_auth of scrape config. See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5511
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
* adding support for username_file in basic_auth of scrape config
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
* adding support for username_file in basic_auth of scrape config
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
* adding support for username_file in basic_auth of scrape config
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
---------
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
Entries for the previous dates is usually not used, so there is little sense in keeping them in memory.
This should reduce the size of storage/date_metricID cache, which can be monitored
via vm_cache_entries{type="storage/date_metricID"} metric.
This limit has little sense for these APIs, since:
- Thses APIs frequently result in scanning of all the time series on the given time range.
For example, if extra_filters={datacenter="some_dc"} .
- Users expect these APIs shouldn't hit the -search.maxUniqueTimeseries limit,
which is intended for limiting resource usage at /api/v1/query and /api/v1/query_range requests.
Also limit the concurrency for /api/v1/labels, /api/v1/label/.../values
and /api/v1/series requests in order to limit the maximum memory usage and CPU usage for these API.
This limit shouldn't affect typical use cases for these APIs:
- Grafana dashboard load when dashboard labels should be loaded
- Auto-suggestion list load when editing the query in Grafana or vmui
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5055
* Optimize the performance of data merge: decimal.CalibrateScale() from 49633 ns/op to 9146 ns/op
* Optimize the performance of data merge: decimal.CalibrateScale()
Sending unfinished aggregate states tend to produce unexpected anomalies with lower values than expected.
The old behavior can be restored by specifying `flush_on_shutdown: true` setting in streaming aggregation config
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Maintain a separate worker pool per each part type (in-memory, file, big and small).
Previously a shared pool was used for merging all the part types.
A single merge worker could merge parts with mixed types at once. For example,
it could merge simultaneously an in-memory part plus a big file part.
Such a merge could take hours for big file part. During the duration of this merge
the in-memory part was pinned in memory and couldn't be persisted to disk
under the configured -inmemoryDataFlushInterval .
Another common issue, which could happen when parts with mixed types are merged,
is uncontrolled growth of in-memory parts or small parts when all the merge workers
were busy with merging big files. Such growth could lead to significant performance
degradataion for queries, since every query needs to check ever growing list of parts.
This could also slow down the registration of new time series, since VictoriaMetrics
searches for the internal series_id in the indexdb for every new time series.
The third issue is graceful shutdown duration, which could be very long when a background
merge is running on in-memory parts plus big file parts. This merge couldn't be interrupted,
since it merges in-memory parts.
A separate pool of merge workers per every part type elegantly resolves both issues:
- In-memory parts are merged to file-based parts in a timely manner, since the maximum
size of in-memory parts is limited.
- Long-running merges for big parts do not block merges for in-memory parts and small parts.
- Graceful shutdown duration is now limited by the time needed for flushing in-memory parts to files.
Merging for file parts is instantly canceled on graceful shutdown now.
- Deprecate -smallMergeConcurrency command-line flag, since the new background merge algorithm
should automatically self-tune according to the number of available CPU cores.
- Deprecate -finalMergeDelay command-line flag, since it wasn't working correctly.
It is better to run forced merge when needed - https://docs.victoriametrics.com/#forced-merge
- Tune the number of shards for pending rows and items before the data goes to in-memory parts
and becomes visible for search. This improves the maximum data ingestion rate and the maximum rate
for registration of new time series. This should reduce the duration of data ingestion slowdown
in VictoriaMetrics cluster on e.g. re-routing events, when some of vmstorage nodes become temporarily
unavailable.
- Prevent from possible "sync: WaitGroup misuse" panic on graceful shutdown.
This is a follow-up for fa566c68a6 .
Thanks @misutoth to for the inspiration at https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5212
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5190
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3790
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3551
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3337
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3425
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3647
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3641
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/648
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/291
The maxFileParts usage has been accidentally removed in fa566c68a6
While at it, add Count suffix to *AssistedMerges counter names in order to make them less misleading.
Previously their names were falsely suggesting that these are gauges, which show the number of concurrently
executed assisted merges.
