Aliaksandr Valialkin
b1f94f7f0e
app/vmselect/promql: return at most one time series from absent_over_time() in the same way as Prometheus does
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2130
2022-02-12 15:45:09 +02:00
Aliaksandr Valialkin
a56b77db5b
docs/vmagent.md: add unsupported Prometheus config sections chapter
2022-02-12 01:08:10 +02:00
Aliaksandr Valialkin
d8ffbf55a2
docs/CHANGELOG.md: document ea153e5f90
2022-02-12 00:48:06 +02:00
Roman Khavronenko
cf1a8bce6b
lib/index: reduce read/write load after indexDB rotation ( #2177 )
...
* lib/index: reduce read/write load after indexDB rotation
IndexDB in VM is responsible for storing TSID - ID's used for identifying
time series. The index is stored on disk and used by both ingestion and read path.
IndexDB is stored separately to data parts and is global for all stored data.
It can't be deleted partially as VM deletes data parts. Instead, indexDB is
rotated once in `retention` interval.
The rotation procedure means that `current` indexDB becomes `previous`,
and new freshly created indexDB struct becomes `current`. So in any time,
VM holds indexDB for current and previous retention periods.
When time series is ingested or queried, VM checks if its TSID is present
in `current` indexDB. If it is missing, it checks the `previous` indexDB.
If TSID was found, it gets copied to the `current` indexDB. In this way
`current` indexDB stores only series which were active during the retention
period.
To improve indexDB lookups, VM uses a cache layer called `tsidCache`. Both
write and read path consult `tsidCache` and on miss the relad lookup happens.
When rotation happens, VM resets the `tsidCache`. This is needed for ingestion
path to trigger `current` indexDB re-population. Since index re-population
requires additional resources, every index rotation event may cause some extra
load on CPU and disk. While it may be unnoticeable for most of the cases,
for systems with very high number of unique series each rotation may lead
to performance degradation for some period of time.
This PR makes an attempt to smooth out resource usage after the rotation.
The changes are following:
1. `tsidCache` is no longer reset after the rotation;
2. Instead, each entry in `tsidCache` gains a notion of indexDB to which
they belong;
3. On ingestion path after the rotation we check if requested TSID was
found in `tsidCache`. Then we have 3 branches:
3.1 Fast path. It was found, and belongs to the `current` indexDB. Return TSID.
3.2 Slow path. It wasn't found, so we generate it from scratch,
add to `current` indexDB, add it to `tsidCache`.
3.3 Smooth path. It was found but does not belong to the `current` indexDB.
In this case, we add it to the `current` indexDB with some probability.
The probability is based on time passed since the last rotation with some threshold.
The more time has passed since rotation the higher is chance to re-populate `current` indexDB.
The default re-population interval in this PR is set to `1h`, during which entries from
`previous` index supposed to slowly re-populate `current` index.
The new metric `vm_timeseries_repopulated_total` was added to identify how many TSIDs
were moved from `previous` indexDB to the `current` indexDB. This metric supposed to
grow only during the first `1h` after the last rotation.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2022-02-12 00:30:08 +02:00
Roman Khavronenko
e3adcbec6e
lib/promscrape: support prometheus-like duration in scrape configs ( #2169 )
...
* lib/promscrape: support prometheus-like duration in scrape configs
The change allows to specify duration values like `1d`, `1w`
for fields `scrape_interval`, `scrape_timeout`, etc.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/817#issuecomment-1033384766
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/blockcache: make linter happy
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/promscrape: support prometheus-like duration in scrape configs
* add support for extra fields `scrape_align_interval` and `scrape_offset`;
* support Prometheus duration parsing for `__scrape_interval__`
and `__scrape_duration__` labels;
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
* wip
* docs/CHANGELOG.md: document the feature
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2022-02-11 16:17:00 +02:00
Aliaksandr Valialkin
3cb72ccc2a
lib/promscrape/discovery/kubernetes: add __meta_kubernetes_endpointslice_{label,annotation}* labels to be consistent with other role values for Kubernetes service discovery
2022-02-11 14:54:47 +02:00
Nikolay
4e7f7f3302
fixes service discovery for kubernetes ( #2173 )
...
* fixes service discovery for kubernetes
now it must take in account all pods that belong to the discovered endpoint and endpointslice
adds simple test for endpoints
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2134
* wip
* docs/CHANGELOG.md: document the change
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2022-02-11 13:34:22 +02:00
Aliaksandr Valialkin
8f2d03fdc7
docs/CHANGELOG.md: document 4e722c459b
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2167
2022-02-10 12:20:12 +02:00
Aliaksandr Valialkin
480e40b344
docs/Articles.md: add an article from Asserts.io, which mentions VictoriaMetrics components
2022-02-10 12:16:43 +02:00
Aliaksandr Valialkin
0028b2c6d1
docs/CHANGELOG.md: add instructions on how to build VictoriaMetrics components from source code in order to test tip changes
2022-02-08 16:44:08 +02:00
Nikolay
a8acad7453
adds CGO build for arm64 ( #2102 )
...
* adds CGO build for arm64
it must improve performance for arm64 based deployments of vmstorage and
vmsingle for 15-20%
it depends on gozstd package update for correct musl gozstd vendoring
* typo fixes
* docs/CHANGELOG.md: document the change
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2022-02-08 16:25:59 +02:00
Roman Khavronenko
e855b202df
docs: add Storage section to docs ( #2155 )
...
* docs: add Storage section to docs
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2151
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Apply suggestions from code review
* docs: `make docs-sync`
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2022-02-08 15:59:17 +02:00
Aliaksandr Valialkin
3e783aa2a1
docs/Cluster-VictoriaMetrics.md: sync with cluster branch
2022-02-08 15:43:21 +02:00
Aliaksandr Valialkin
9bb60ab00f
lib/promscrape: set -promscrape.config.strictParse to true by default
...
This allows detecting long-living silent errors in -promscrape.config
2022-02-08 15:41:43 +02:00
Aliaksandr Valialkin
de26d1ff23
docs/Single-server-VictoriaMetrics.md: add a link to exlanation on how downsampling works
2022-02-08 15:10:41 +02:00
Aliaksandr Valialkin
8b36044c93
docs/CHANGELOG.md: add links to issues, which could benefit from improved re-routing algorithm
2022-02-07 16:55:28 +02:00
Aliaksandr Valialkin
baab622db6
docs: fix links to FAQ.md entries after they have been changed in ccf04239e6
2022-02-07 16:02:44 +02:00
Aliaksandr Valialkin
865f09ecbb
docs: sync with cluster branch
2022-02-07 14:54:16 +02:00
Aliaksandr Valialkin
ba1b3b8ef2
docs: cross-link downsampling docs from deduplication and vmalert docs
2022-02-04 11:57:05 +02:00
Aliaksandr Valialkin
b5b3c585b3
lib/promscrape: show the total number of scrapes and the total number of scrape errors per target at /targets page
...
This information may be useful when debugging unreliable scrape targets
2022-02-03 20:22:41 +02:00
Aliaksandr Valialkin
2968779f16
lib/promscrape: provide the ability to fetch target responses on behalf of vmagent or single-node VictoriaMetrics
...
This feature may be useful when debugging metrics for the given target located in isolated environment
2022-02-03 19:00:55 +02:00
Aliaksandr Valialkin
4b850c2a59
app/vmselect/promql: do not push down filters, which enumerate more than 10k unique values
...
Such filters may slow down time series search, so just skip them.
This is a follow-up for e7f1ceeb84https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1827
2022-02-02 23:40:02 +02:00
Aliaksandr Valialkin
4ef32df4fa
docs/CHANGELOG.md: document 55e3bbd4cc
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1567
2022-02-02 23:32:35 +02:00
Aliaksandr Valialkin
6530bcedec
docs: updates after 5da71eb685
...
* Mention about the ability to configure vmalert notifiers via files in docs/CHANGELOG.md
* Mention about the ability to use Consul service discovery for vmalert notifiers in docs/CHANGELOG.md
* Run `make docs-sync` in order to sync app/vmalert/README.md to docs/vmalert.md
2022-02-02 23:26:18 +02:00
Pablo Ley
a6587ded51
Added missing links in EmbeddedHPA API docs
2022-02-02 18:59:42 +03:00
Aliaksandr Valialkin
ead66155ef
lib/cgroup: expose process_cpu_cores_available metric
...
This metric shows the number of CPU cores available to the process.
This allows creating alerting rules on CPU saturation with the following query:
rate(process_cpu_seconds_total[5m]) / process_cpu_cores_available > 0.9
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2107
2022-01-31 20:24:41 +02:00
Aliaksandr Valialkin
e7f1ceeb84
app/vmselect/promql: optimize queries, which join on _info metrics.
...
Automatically add common filters from one side of binary operation
to the other side before sending the query to storage subsystem.
See https://grafana.com/blog/2021/08/04/how-to-use-promql-joins-for-more-effective-queries-of-prometheus-metrics-at-scale/
and https://www.robustperception.io/exposing-the-software-version-to-prometheus
2022-01-31 19:32:36 +02:00
Aliaksandr Valialkin
15475a9d1f
docs/Release-Guide.md: add instructions on how to create signed release tags
2022-01-31 19:18:48 +02:00
Aliaksandr Valialkin
3d8a4bf023
docs/CHANGELOG.md: document 6a519896db
2022-01-31 12:41:57 +02:00
Aliaksandr Valialkin
97947c5fcf
docs/vmauth.md: mention that backend services must be accessible only via vmauth
2022-01-28 12:06:45 +02:00
Denys Holius
527bee4b1e
FAQ update ( #2111 )
...
* FAQ update: how downsampling and deduplication will work at the same time
* Update docs/FAQ.md
Co-authored-by: Aliaksandr Valialkin <valyala@gmail.com>
2022-01-27 20:35:16 +02:00
jaysony
2e59b17108
correct VMAgentStatus description ( #2109 )
...
correct VMAgentStatus description from VMAlert to VMAgent.
2022-01-27 20:18:05 +02:00
Aliaksandr Valialkin
e02e0508da
vendor: update github.com/VictoriaMetrics/metricsql from v0.37.0 to v0.38.0
...
This adds more optimization cases for https://utcc.utoronto.ca/~cks/space/blog/sysadmin/PrometheusLabelNonOptimization
For example:
* Multi-level transform functions. For example, abs(round(foo{a="b"})) + bar{x="y"}
is now optimized to abs(round(foo{a="b",x="y"})) + bar{a="b",x="y"}
* Binary operations with `on()`, `without()`, `group_left()` and `group_right()` modifiers.
For example, foo{a="b"} on (a) + bar is now optimized to foo{a="b"} on (a) + bar{a="b"}
* Multi-level binary operations. For example, foo{a="b"} + bar{x="y"} + baz{z="q"}
is now optimized to foo{a="b",x="y",z="q"} + bar{a="b",x="y",z="q"} + baz{a="b",x="y",z="q"}
* Aggregate functions. For example, sum(foo{a="b"}) by (c) + bar{c="d"}
is now optimized to sum(foo{a="b",c="d"}) by (c) + bar{c="d"}
2022-01-27 19:03:54 +02:00
Aliaksandr Valialkin
a41c34705e
docs/operator: fix links to Operator API docs
2022-01-25 17:38:16 +02:00
Aliaksandr Valialkin
746ee191e8
lib/logger/throttler.go: show the original location of the error and warning message
...
Previously the location inside LogThrottler implementation was shown. This could complicate debugging.
2022-01-23 13:55:00 +02:00
f41gh7
ceb1376267
updates operator docs
2022-01-21 19:03:19 +03:00
Yury Molodov
ad5059f2d3
vmui: fixed display type switching ( #2088 )
...
* fix: correct switch display type
* docs/CHANGELOG.md: document the bugfix
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2022-01-21 16:56:22 +02:00
Yurii Kravets
3ea054a52c
Created Operator folder in docs ( #2034 )
...
* Created Operator folder in docs
Transferred Operator documentation
* Removed Contributing and Release
* Changed sort numbering
* Renamed folder
Operator -> operator
* 1
1
* Name change
Operator -> operator
* Removed colon symbol
* Useful links transformed to links style
* "updated at..." is no longer a header
* delete manager patch.yaml
* delete kustomization.yaml
* removed part with links
* community and contributions part removed
* Delete readme
* Docs navigation removed
2022-01-21 12:05:58 +02:00
Yury Molodov
adbb821eac
vmui: fix time range selector ( #2085 )
...
* fix: add date validate for time range
* app/vmselect/vmui: `make vmui-update`
* docs/CHANGELOG.md: document the bugfix
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2022-01-21 12:02:38 +02:00
Aliaksandr Valialkin
eb4bd92fac
all: update link to EULA from https://victoriametrics.com/assets/VM_EULA.pdf to https://victoriametrics.com/legal/eula/
2022-01-20 22:23:27 +02:00
Aliaksandr Valialkin
145337792d
lib/{mergeset,storage}: properly limit cache sizes for indexdb
...
Previously these caches could exceed limits set via `-memory.allowedPercent` and/or `-memory.allowedBytes`,
since limits were set independently per each data part. If the number of data parts was big, then limits could be exceeded,
which could result to out of memory errors.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2007
2022-01-20 18:37:17 +02:00
Aliaksandr Valialkin
84f6b3014c
docs/CHANGELOG.md: document the bugfix for highestMax() function is Graphite render API
2022-01-20 12:16:18 +02:00
Aliaksandr Valialkin
56168d8565
docs/Release-Guide.md: update instructions for exporting snapcraft login to ~/.snap/login.json
2022-01-19 15:20:59 +02:00
Aliaksandr Valialkin
109363de49
docs/CHANGELOG.md: add missing parens in example for @ modifier
2022-01-19 13:04:51 +02:00
Oct
ccf04239e6
docs: Correct some urls in the docs ( #2081 )
...
* docs:update Swift S3 api url
* docs/vmbackup.md: update Swift S3 api url
* docs: update KairosDB docs url
* docs: update thanos docs url
2022-01-19 11:55:30 +02:00
Aliaksandr Valialkin
98edeac7b7
docs/CHANGELOG.md: fix incorrect link to the issue
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1911
2022-01-19 00:06:44 +02:00
Aliaksandr Valialkin
8f5902dfcf
docs/CHANGELOG.md: cut v1.72.0
2022-01-18 22:43:18 +02:00
Aliaksandr Valialkin
919ee73153
docs/vmbackup.md: make docs-sync after ca11def2a5
2022-01-18 22:29:17 +02:00
Roman Khavronenko
0b0bf94c96
docs: update retention docs with additional details ( #2060 )
...
Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-01-18 22:25:48 +02:00
Yury Molodov
8bdc45ba00
fix: remove buffer period ( #2078 )
...
* fix: remove buffer period
* app/vmselect/vmui: `make vmui-update`
* docs/CHANGELOG.md: document the implemented feature
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2064
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2022-01-18 21:42:56 +02:00
Yury Molodov
70737ea4ac
vmui: correct url encoding ( #2067 )
...
* fix: correct encode multi-line queries
* fix: change autocomplete for correct arrows work
* app/vmselect/vmui: `make vmui-update`
* docs/CHANGELOG.md: document the bugfix for https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2039
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2022-01-18 21:31:46 +02:00
Aliaksandr Valialkin
dcadec65b6
docs/CHANGELOG.md: document 8e3f9c1fbb
2022-01-18 21:24:49 +02:00
Oct
ca11def2a5
docs: Correct config URL ( #2077 )
...
docs: update incorrect links
2022-01-18 15:06:00 +02:00
Aliaksandr Valialkin
e933e3150d
docs/CHANGELOG.md: document fcd33fc409
2022-01-18 12:46:33 +02:00
Aliaksandr Valialkin
c2a3911bb5
docs/CHANGELOG.md: document that vmgateway now supports extra_filters option
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1863
2022-01-18 12:39:25 +02:00
Aliaksandr Valialkin
dbfa1421ac
docs/vmgateway.md: update docs, since vmgateway now supports extra_filters
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1863
2022-01-18 12:39:25 +02:00
Aziz Köksal
74a4c29729
docs: proofread FAQ.md ( #2062 )
...
* Added missing articles.
* Changed minus characters to long dashes.
* Rephrased some words.
* Corrected grammar mistakes.
* Set correct possessive apostrophes.
* "setup" -> "set up"
* "no need in" -> "no need for"
* "comparing" -> "compared"
* "less" -> "fewer"
* "additionally" -> "in addition to"
2022-01-17 21:56:19 +02:00
Aliaksandr Valialkin
1bdc71d917
app/vmselect/promql: implement keep_metric_names modifier for transform and rollup functions
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/949
2022-01-14 04:14:59 +02:00
Aliaksandr Valialkin
f41846d002
app/vmselect/promql: add stale_samples_over_time() function
2022-01-14 01:48:04 +02:00
Aliaksandr Valialkin
96707223db
docs/CHANGELOG.md: yet another attempt to fix formatting for yaml snippet
2022-01-14 01:14:55 +02:00
Aliaksandr Valialkin
d7d83d6d93
docs/CHANGELOG.md: fix formatting for scrape_configs example
2022-01-14 01:02:32 +02:00
Aliaksandr Valialkin
1d05444b33
lib/promscrape: expose promscrape_stale_samples_created_total metric for monitoring the number of created stale samples
2022-01-14 01:00:46 +02:00
Aliaksandr Valialkin
831b93a755
app/vmalert: add parseDuration function in the same way as Prometheus does
...
See https://github.com/prometheus/prometheus/pull/8817
2022-01-13 23:30:41 +02:00
Aliaksandr Valialkin
80f03177c4
lib/promscrape/discovery/kubernetes: add __meta_kubernetes_node_provider_id label for discovered Kubernetes nodes in the same way as Prometheus does
...
See https://github.com/prometheus/prometheus/pull/9603
2022-01-13 23:16:02 +02:00
Aliaksandr Valialkin
80f966b80c
app/vmalert: add stripPort template function in the same way as Prometheus does
...
See https://github.com/prometheus/prometheus/pull/10002
2022-01-13 22:53:42 +02:00
Aliaksandr Valialkin
355a63733d
lib/promscrape/discovery/kubernetes: add the ability to limit service discovery to the current namespace
...
See https://github.com/prometheus/prometheus/issues/9782 and https://github.com/prometheus/prometheus/pull/9881
2022-01-13 22:44:35 +02:00
Aliaksandr Valialkin
c883c15878
app/vmselect/promql: add support for @ modifier
...
Add support for `@` modifier in MetricsQL according to https://prometheus.io/docs/prometheus/latest/querying/basics/#modifier
Extend the support with the following features:
* Allow using `@` modifier everywhere in the query. For example, `sum(foo) @ end()`
* Allow using arbitrary expression as `@` modifier. For example, `foo @ (end() - 1h)`
returns `foo` value at `end - 1 hour` timestamp on the selected time range `[start ... end]`
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1348
2022-01-13 22:12:06 +02:00
Aliaksandr Valialkin
17eb86a689
lib/promscrape/discovery/dockerswarm: follow up after 68a117a25a
...
- Document the bugfix at docs/CHANGELOG.md
- Set __address__ field after copying commonLabels to the resulting map of discovered labels.
This makes sure that the correct __address__ label is used.
2022-01-11 09:20:10 +02:00
Aliaksandr Valialkin
7a2c46d951
docs/CHANGELOG.md: document 77bfa8181d
2022-01-11 08:53:49 +02:00
Dmitry Tolstoy
b434be3d2d
docs: Correct config URL ( #2051 )
...
Missed /guides folder
2022-01-10 16:24:41 +02:00
Aliaksandr Valialkin
bdba50432b
docs/CHANGELOG.md: add release dates for every release
2022-01-07 12:27:32 +02:00
Aliaksandr Valialkin
e4e36383e2
lib/promscrape: do not send staleness markers on graceful shutdown
...
This follows Prometheus behavior.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2013#issuecomment-1006994079
2022-01-07 01:17:57 +02:00
Aliaksandr Valialkin
bc03ab6688
docs/vmctl.md: make docs-sync
2022-01-07 01:17:30 +02:00
Aliaksandr Valialkin
46c310f62f
docs/FAQ.md: add what is the difference between vmagent and Prometheus agent chapter
2022-01-06 23:13:11 +02:00
Aliaksandr Valialkin
c70c064752
docs: follow-up after ae89b4e818
2022-01-05 16:31:45 +02:00
Denys Holius
ae89b4e818
Old links replaced for newest ( #2033 )
...
* replaced old links to the website
* fixed deletion main README.md file
* fix: added docs files after docs-sync
2022-01-05 16:30:13 +02:00
Aliaksandr Valialkin
dbe592597f
docs/CHANGELOG.md: clarify the issue description, which is fixed by 38bf5fc136
2022-01-05 16:19:06 +02:00
Aliaksandr Valialkin
178dd87e26
lib/storage: follow-up for 38bf5fc136
2022-01-05 16:00:11 +02:00
Aliaksandr Valialkin
e1d7cbfc77
docs/CHANGELOG.md: document 60266078ca
2022-01-04 11:44:57 +02:00
Aliaksandr Valialkin
5ce94e1dd3
docs/CHANGELOG.md: document ac47733044
2022-01-03 21:15:44 +02:00
Aliaksandr Valialkin
b1b67169f1
docs/Quick-Start.md: simplify quick start guide
2022-01-03 17:28:38 +02:00
Yurii Kravets
f0c331c724
Update README.md ( #1996 )
...
* Update README.md
go 1.16 -> 1.17
* Update README.md
* Update README.md
* Update Cluster-VictoriaMetrics.md
* Update Single-server-VictoriaMetrics.md
* Update vmauth.md
* Update vmbackup.md
* Update vmrestore.md
* Update vmagent.md
* Update vmctl.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
2021-12-23 12:09:59 +02:00
Aliaksandr Valialkin
b5ce35dfc8
docs/CHANGELOG.md: document 543bd0ea0c
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1999
2021-12-23 12:08:06 +02:00
Aliaksandr Valialkin
cbaa2af280
lib/promscrape: scrape replicated targets at different offsets in vmagent replicated clustering mode
...
This guarantees that the deduplication consistently leaves samples from the same vmagent replica.
See https://docs.victoriametrics.com/vmagent.html#scraping-big-number-of-targets
2021-12-23 00:20:39 +02:00
Aliaksandr Valialkin
c7826ab36e
docs/FAQ.md: link to managed VictoriaMetrics at AWS
...
See https://docs.victoriametrics.com/FAQ.html#what-is-the-pricing-for-victoriametrics
2021-12-22 23:14:47 +02:00
Nikolay
8ff7da7202
adds restore.lock ( #1988 )
...
* adds restore.lock
it must prevent from running storage after incomplete restore process
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1958
* return back flock file deletion
* Apply suggestions from code review
* wip
* docs/CHANGELOG.md: document https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1958
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2021-12-22 13:10:15 +02:00
Aliaksandr Valialkin
3cfb90b227
docs/CHANGELOG.md: document 34fdc8881b
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1911
2021-12-21 16:40:39 +02:00
Denys Holius
5dc9ab5829
bump revision of dashboards to latest ( #1986 )
2021-12-21 12:11:15 +02:00
Aliaksandr Valialkin
ee17516afd
docs/Single-server-VictoriaMetrics.md: mention that recording rules in vmalert can be used for reducing the number of time series
2021-12-20 20:03:42 +02:00
Aliaksandr Valialkin
4701c108ff
docs/CHANGELOG.md: cut v1.71.0
2021-12-20 19:10:24 +02:00
Aliaksandr Valialkin
ad388ecd78
docs: mention that downsampling can be evaluated for free by running enterprise binaries
2021-12-20 15:57:25 +02:00
Yurii Kravets
40073bbcb5
Update FAQ.md ( #1765 )
...
* Update FAQ.md
Adding explanation "Why do same metrics have differences in VictoriaMetrics and Prometheus dashboards?"
* Update FAQ
* Update FAQ.md
* Apply suggestions from code review
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
2021-12-20 13:43:04 +02:00
Aliaksandr Valialkin
974d9c0eee
app/vmselect/promql: follow-up after 177e345d8a
...
* Document changes_prometheus(), increase_prometheus() and delta_prometheus() functions.
* Simplify their implementation
* Mention these functions in docs/CHANGELOG.md
2021-12-20 13:19:44 +02:00
Aliaksandr Valialkin
d87414c57c
docs/FAQ.md: describe main reasons for high churn rate
2021-12-20 12:30:09 +02:00
Aliaksandr Valialkin
16636a458f
docs/CHANGELOG.md: document 6814cc6809
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1943
2021-12-17 20:16:22 +02:00
Aliaksandr Valialkin
193331d522
app/vmselect: de-duplicate data exported via /api/v1/export/csv by default
...
Previously the exported data wasn't de-duplicated.
Now it is possible to export the raw data without deduplication
by passing reduce_mem_usage=1 query arg to /api/v1/export/csv
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1837
2021-12-17 10:57:39 +02:00
Roman Khavronenko
f30ed13155
docs: add Benchmarks section ( #1950 )
...
Signed-off-by: hagen1778 <roman@victoriametrics.com>
2021-12-16 19:15:19 +03:00
Roman Khavronenko
8b0d340c18
docs: update MetricsQL.Subquery section description ( #1951 )
...
* simplify sentences;
* fix typo.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
2021-12-16 19:09:25 +03:00
Aliaksandr Valialkin
a3adf24527
lib/promscrape: allow up to 5 redirects when scraping a target by default
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1945
2021-12-16 00:14:14 +02:00
Aliaksandr Valialkin
5efe377a26
app/vmselect/promql: add timestamp_with_name(m[d]) function
...
This function works the same as `timestamp()`, but doesn't remove source time series names.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/949#issuecomment-995222388
2021-12-15 23:37:07 +02:00
Aliaksandr Valialkin
27a1ae57e5
docs: mention -storage.minFreeDiskSpaceBytes command-line flag at capacity planning section
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1727 and https://github.com/VictoriaMetrics/VictoriaMetrics/issues/269
2021-12-15 21:41:30 +02:00
Aliaksandr Valialkin
65bef771f6
docs/Cluster-VictoriaMetrics.md: mention about the added downsampling support
2021-12-15 16:40:15 +02:00
Aliaksandr Valialkin
8e1a87491a
docs: document the added dowsnampling support in VictoriaMetrics enterprise
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/36
2021-12-15 16:25:51 +02:00
Aliaksandr Valialkin
4ff647137a
lib/storage: deduplicate samples more thoroughly
...
Previously some duplicate samples may be left on disk for time series with high churn rate.
This may result in higher disk space usage.
2021-12-15 15:59:58 +02:00
Aliaksandr Valialkin
acd56603b0
app/victoria-metrics: mention https://docs.victoriametrics.com/#downsampling in the description for -dedup.minScrapeInterval command-line flag
2021-12-15 13:18:04 +02:00
Aliaksandr Valialkin
e1a715b0f5
lib/storage: convert alternate regexps into Graphite wildcards inside __graphite__ pseudo-label
...
For example, `{__graphite__=~"foo.(bar|baz)"}` is automatically converted to `{__graphite__=~"foo.{bar,baz}"}` before execution.
This allows using multi-value Grafana template variables such as `{__graphite__=~"foo.($app)"}`.
2021-12-14 19:51:49 +02:00
Aliaksandr Valialkin
d456af7499
docs/CHANGELOG.md: link to the issue about unaligned 64-bit atomic opertion panic on 32-bit architectures
2021-12-14 15:00:10 +02:00
Aliaksandr Valialkin
80996d916b
docs/CHANGELOG.md: an attempt to properly show $labels.alertname at https://docs.victoriametrics.com/CHANGELOG.html
2021-12-14 14:56:57 +02:00
Yury Molodov
49e6a921df
vmui: custom step ( #1942 )
...
* feat: add a label for the Query field
* fix: change zoom position
* fix: add description and error code to alerts
* fix: correct logic query history
* fix: correct update query history
* feat: add custom step
* update package-lock.json
* docs: document that VMUI now supports overriding of `step` query arg, which is passed to `/api/v1/query_range`
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2021-12-14 14:51:45 +02:00
Yury Molodov
b5b701d590
vmui: minor fixes ( #1936 )
...
* feat: add a label for the Query field
* fix: change zoom position
* fix: add description and error code to alerts
* fix: correct logic query history
* fix: correct update query history
* app/vmselect/vmui: `make vmui-update`
* docs/CHANGELOG.md: document bugfixes
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2021-12-13 13:42:37 +02:00
Aliaksandr Valialkin
0a157f65bd
docs/Single-server-VictoriaMetrics.md: added a link to Graphite paths and wildcards - https://graphite.readthedocs.io/en/latest/render_api.html#paths-and-wildcards
2021-12-13 12:01:17 +02:00
Aliaksandr Valialkin
c82cc9cd11
docs/CHANGELOG.md: document 7c3b6365f0
2021-12-12 19:09:20 +02:00
Aliaksandr Valialkin
d1f8915ed1
app/vmselect/promql: preserve the order of time series passed to limit_offset() function
...
Previously time series passed to `limit_offset()` were shuffled according to hash for their labels.
This was unexpected behaviour for most users.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1920 and https://github.com/VictoriaMetrics/VictoriaMetrics/issues/951
2021-12-12 18:04:58 +02:00
Aliaksandr Valialkin
3d4349343d
docs/CHANGELOG.md: document 2851709745
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1921
2021-12-10 12:13:34 +02:00
Aliaksandr Valialkin
b42981c465
docs/Single-server-VictoriaMetrics.md: add a link to https://github.com/denisgolius/victoriametrics-ru-links
2021-12-09 19:42:27 +02:00
Aliaksandr Valialkin
52eb9c99e2
docs: document the ability to investigate correlation between two queries at /vmui
...
This is a follow-up for c1fd93e8a0
2021-12-08 17:24:01 +02:00
Yury Molodov
c1fd93e8a0
vmui: multiple queries ( #1916 )
...
* feat: change duration by "enter"
* fix: optimize data processing for chart
* feat: set minimum step to 1ms
* update dependencies
* feat: remove save the last query to local storage
* fix: handle an error in a table with subqueries
* feat: store display type in URL
* Revert "feat: store display type in URL"
This reverts commit ccc242c69a
2021-12-08 16:40:15 +02:00
Aliaksandr Valialkin
0288078cfb
docs/Single-server-VictoriaMetrics.md: add LinkedIn public channel
2021-12-08 13:15:24 +02:00
Aliaksandr Valialkin
64da5c2bf6
docs/Release-Guide.md: refresh the list of channels for publishing release notes
2021-12-08 13:15:05 +02:00
Aliaksandr Valialkin
2711d2ea55
docs/Single-server-VictoriaMetrics.md: move features chapter above the case studies chapter
2021-12-08 12:49:09 +02:00
Aliaksandr Valialkin
ff15a752c1
app/vmselect: accept optional extra_filters[] query args for all the supported Prometheus querying APIs
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1863
2021-12-06 17:07:09 +02:00
Aliaksandr Valialkin
45d082bbe2
app/vminsert: add -maxLabelValueLen command-line flag
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1908
2021-12-06 11:40:34 +02:00
Aliaksandr Valialkin
da402fbdfa
lib/workingsetcache: fix unaligned 64-bit atomic operation panic on 32-bit architectures
...
The panic has been introduced in 7275ebf91a
2021-12-03 01:21:51 +02:00
Aliaksandr Valialkin
4888e2c232
docs/Cluster-VictoriaMetrics.md: sync with cluster branch
2021-12-03 00:13:02 +02:00
Aliaksandr Valialkin
06642d97f5
app: allow specifying http and https urls in the following command-line flags
...
* -promscrape.config
* -relabelConfig
* -remoteWrite.relabelConfig
* -remoteWrite.urlRelabelConfig
2021-12-03 00:10:02 +02:00
Aliaksandr Valialkin
62b4efb3e7
app/vmauth: follow-up for 13368bed18
...
* Document the ability to specify http or https urls in `-auth.config` at docs/CHANGELOG.md
* Move the ReadFileOrHTTP to lib/fs, so it can be re-used in other places where a file
should be read from the given path. For example, in `-promscrape.config` at `vmagent`.
2021-12-02 23:32:05 +02:00
Aliaksandr Valialkin
7f2f26b25f
docs/CHANGELOG.md: cut v1.70.0
2021-12-02 15:01:25 +02:00
Aliaksandr Valialkin
ed9ef7733b
docs/CHANGELOG.md: document 0afd14a14a
2021-12-02 14:47:20 +02:00
Aliaksandr Valialkin
394a345ae0
lib/httpserver: expose /-/healthy and /-/ready endpoints as Prometheus does
...
This improves integration with third-party solutions, which rely on these endpoints.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1833
2021-12-02 14:36:58 +02:00
Aliaksandr Valialkin
03f5ad3060
lib/protoparser/graphite: allow multiple separators between metric name, value and timestamp
2021-12-02 13:43:49 +02:00
Aliaksandr Valialkin
49a18b8660
lib/protoparser/graphite: properly parse Graphite line with whitespace after the timestamp
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1865
2021-12-02 13:33:26 +02:00
Aliaksandr Valialkin
91d8873d86
docs/FAQ.md: mention that VictoriaMetrics can be queried via vmui
2021-12-02 13:16:30 +02:00
Aliaksandr Valialkin
c0cbf0de2a
app/{vmbackup,vmrestore}: export internal metrics at /metrics http handler
2021-12-02 11:55:58 +02:00
Aliaksandr Valialkin
7275ebf91a
app/vmstorage: export vm_cache_size_max_bytes metrics for determining capacity of various caches
...
The vm_cache_size_max_bytes metric can be used for determining caches which reach their capacity via the following query:
vm_cache_size_bytes / vm_cache_size_max_bytes > 0.9
2021-12-02 10:30:43 +02:00
Aliaksandr Valialkin
2f63dec2e3
lib/fs: add vm_filestream_read_duration_seconds_total and vm_filestream_write_duration_seconds_total metrics
...
These metrics help determining persistent disk saturation with `rate(vm_filestream_read_duration_seconds_total) > 0.9`
2021-12-02 10:30:42 +02:00
Roman Khavronenko
d052c8c81e
vmalert: adjust topologies docs in README ( #1893 )
...
Commit changes images width and order in topologies section
for better readability.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
2021-12-02 11:27:46 +03:00
Denys Holius
23a03d23aa
added guide-vmcluster-multiple-retention-setup to guides list ( #1891 )
2021-12-02 10:10:25 +02:00
Roman Khavronenko
866b6a842b
Vmalert docs upd ( #1890 )
...
* vmalert: add topology examples in docs
* vmalert: docs typo fix
2021-12-01 18:33:06 +03:00
Aliaksandr Valialkin
2c41f25fb8
README.md: add a link to https://docs.victoriametrics.com/guides/guide-vmcluster-multiple-retention-setup.html for multi-retention setups
2021-12-01 12:48:30 +02:00
Yurii Kravets
0afec0259b
Create guide-vmcluster-multiple-retention-setup.md ( #1888 )
...
* Create guide-vmcluster-multiple-retention-setup.md
* Apply suggestions from code review
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2021-12-01 12:42:16 +02:00
Aliaksandr Valialkin
ed54b27b85
docs/CHANGELOG.md: document 06eff5a72c
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/487
2021-12-01 12:28:06 +02:00
Yurii Kravets
5881c4ae48
Add retention-scheme.png
2021-11-30 15:57:44 +02:00
Aliaksandr Valialkin
e625436bca
docs/Articles.md: added a link to https://mist.io/blog/2021-11-26-kubernetes-and-victoriametrics-in-Mist-v4-6
2021-11-30 14:59:38 +02:00
Aliaksandr Valialkin
f06495c50a
docs/Single-server-VictoriaMetrics.md: document that the deduplication is applied only when exporting data in JSON line format
...
The exported data isn't de-duplicated by default due to performance reasons.
It is expected that the de-duplication is applied during importing the exported data.
The deduplication is applied only when exporting data via /api/v1/export if `reduce_mem_usage=1` query arg isn't passed to the request.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1837
2021-11-30 13:06:06 +02:00
Aliaksandr Valialkin
10bd8b1d86
docs/CHANGELOG.md: document 852a895b70
2021-11-30 01:22:37 +02:00
Aliaksandr Valialkin
ca6fc0265e
docs/CHANGELOG.md: document f05cddd2fc
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1830
2021-11-30 01:15:41 +02:00
Aliaksandr Valialkin
841647643a
docs/CHANGELOG.md: document 9dd650f67f
2021-11-30 01:09:10 +02:00
Aliaksandr Valialkin
7e79fc6e3c
docs/CHANGELOG.md: document 624ad73705
2021-11-30 01:05:05 +02:00
Aliaksandr Valialkin
98d244b288
docs/CHANGELOG.md: document c6d5927281
2021-11-30 01:00:36 +02:00
Aliaksandr Valialkin
d44c585ca4
lib/protoparser: do not log connection reset by peer error when reading the data via InfluxDB, Graphite and OpenTSDB protocols over plain TCP connections
...
This error is expected, so there is no need in spamming the log with this error.
2021-11-29 21:47:56 +02:00
Aliaksandr Valialkin
03509025bc
docs/CHANGELOG.md: document 695cb617b2
2021-11-29 12:13:11 +02:00
Aliaksandr Valialkin
9bee043ff2
app/vmselect/promql: consistently return zero from deriv(const)
2021-11-17 18:02:05 +02:00
Aliaksandr Valialkin
b688960db0
lib/persistentqueue: add vm_persistentqueue_read_duration_seconds_total and vm_persistentqueue_write_duration_seconds_total metrics for determining disk usage saturation at vmagent
2021-11-17 16:41:35 +02:00
Aliaksandr Valialkin
b900560b83
app/vmselect/promql: add now() function, which returns the current timestamp as a floating-point value in seconds
2021-11-17 16:35:30 +02:00
Aliaksandr Valialkin
52e19a0577
docs: document -s3ForcePathStyle command-line option
...
This is a follow-up for b72eed1f5e
2021-11-17 01:09:32 +02:00
vic
1fb3dbcbda
Update Cluster-VictoriaMetrics.md ( #1806 )
...
replicationFactor flag should be passed to vmselect instead of vminsert for improving query speed:)
2021-11-17 00:59:43 +02:00
Florian Klink
d8c70903ec
docs/vmalert.md: document vmalert url flags a bit more cleanly ( #1823 )
...
Describe remoteWrite.url is used to persist rules and alerts state info,
and add an additional paragraph explaining the separation between
-remoteRead.url and -datasource.url.
Fixes #1810 .
2021-11-17 00:54:06 +02:00
Aliaksandr Valialkin
f3ac945d74
app/vmauth: add ability to override the username label value for vmauth_user_requests_total metric by specifying name option in -auth.config
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1805
2021-11-17 00:47:34 +02:00
Aliaksandr Valialkin
7fda5d52ae
docs/Single-server-VictoriaMetrics.md: add a link to vmalert rules backfilling at Backfilling chapter
2021-11-17 00:23:23 +02:00
Aliaksandr Valialkin
5a180c6659
docs/CHANGELOG.md: document the addition of vm_tenant_used_tenant_bytes metric, which shows the per-tenant disk usage
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1605
2021-11-16 23:36:48 +02:00
Aliaksandr Valialkin
c77ff2d293
docs/Articles.md: add a linkt to OSA Con talk about how clickhouse inspired us to build victoriametrics
2021-11-12 14:21:06 +02:00
Aliaksandr Valialkin
8b6c89423d
docs/CHANGELOG.md: document bugfixes in enteprise versions of vmagent and vmalert
2021-11-12 13:24:07 +02:00
Aliaksandr Valialkin
e2f823fffc
docs/Single-server-VictoriaMetrics.md: mention that it is possible to send gzipped data to /api/v1/import/prometheus
2021-11-09 20:45:14 +02:00
Aliaksandr Valialkin
e5d4c7f4a7
app/vmauth: initialize reverse proxy only after flag.Parse() is called
...
This should properly take into accoun the `-maxIdleConnsPerBackend` command-line flag value.
Previously it was hardcoded to 100.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1300
2021-11-09 19:22:34 +02:00
Aliaksandr Valialkin
5046efb94b
docs/vmalert.md: improve wording in Multitenancy chapter
2021-11-09 14:19:52 +02:00
Aliaksandr Valialkin
a67518fc6d
docs: mention that graphs on the official dashboards contain useful hints
2021-11-08 19:54:10 +02:00
Aliaksandr Valialkin
f39ee8dc95
docs/MetricsQL.md: mention than tlast_over_time() is an alias for timestamp()
2021-11-08 18:29:24 +02:00
Aliaksandr Valialkin
69e655ba7f
docs/CHANGELOG.md: cut v1.69.0
2021-11-08 15:47:36 +02:00
Aliaksandr Valialkin
3419ac1d36
app/vmselect/promql: add duration_over_time(m[d], max_interval) function
...
This function calculates the actual lifetime of the time series on the given lookbehdind window `d`
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1780
2021-11-08 13:14:09 +02:00
Aliaksandr Valialkin
e44137d46b
docs/MetricsQL.md: clarify documentation for lifetime function
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1780
2021-11-08 12:35:17 +02:00
Aliaksandr Valialkin
b07010839c
Makefile: add TAG=v... make publish-release rule for building and publishing a release for the given TAG
2021-11-08 12:29:10 +02:00
Aliaksandr Valialkin
5edf695bc9
docs/CHANGELOG.md: document b9cdbcb5046315db96e1e7ca9923d09d0f30dc25
2021-11-08 12:11:30 +02:00
João Paulo
47d1612bf8
docs: fix multiple typos ( #1787 )
...
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2021-11-05 20:44:02 +02:00
Aliaksandr Valialkin
237885e0d2
docs/vmalert.md: document the addition of -defaultTenant.prometheus and -defaultTenant.graphite command-line options to enterprise version of vmalert
2021-11-05 20:04:09 +02:00
Aliaksandr Valialkin
bf814320b0
app/vmalert: remove rule.type config, since it doesnt play well with the upcoming default tenants for -clusterMode
...
It is better from the consistency point of view to set up rule types at group level where tenant config is set up.
2021-11-05 19:52:32 +02:00
Aliaksandr Valialkin
cbfc7b7c92
app/{vminsert,vmagent}: hide passwords and auth tokens by default at /config page
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1764
2021-11-05 14:41:16 +02:00
Denys Holius
cd966bf552
bumped grafana dashboards revisions for guides ( #1784 )
2021-11-05 11:43:26 +02:00
Aliaksandr Valialkin
faa0eb6b52
docs/FAQ.md: mention that VictoriaMetrics can be queried via Graphite API
2021-11-04 22:37:56 +02:00
Aliaksandr Valialkin
a69264e885
app/vmagent: add -remoteWrite.maxRowsPerBlock command-line option, which may be used for improving data ingestion performance under high load
2021-11-04 15:39:14 +02:00
Aliaksandr Valialkin
e0d2ba5608
app/vmagent/remotewrite: send data to remote storage systems in parallel
...
This should improve data ingestion speed when many `-remoteWrite.url` command-line flags are configured
2021-11-04 15:04:16 +02:00
Roman Khavronenko
1e84339df0
docs: make link to logos zip absolute ( #1782 )
...
The relative link won't work for github-docs website,
so we're changing it to absolute link.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
2021-11-04 11:32:49 +02:00
Aliaksandr Valialkin
aa534c2582
lib/promscrape: add -promscrape.maxResponseHeadersSize command-line flag for tuning the maximum http response headers size from Prometheus scrape targets
2021-11-03 22:26:56 +02:00
Aliaksandr Valialkin
27044b84d2
app/vmselect/promql: add limit_offset(limit, offset, q) function, which can be used for paging over big number of time series
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1778
2021-11-03 16:02:27 +02:00
Aliaksandr Valialkin
43a58bd618
app/vmselect/promql: add label_graphite_group() function for extracting groups from Graphite metric names
2021-11-03 13:19:08 +02:00
Aliaksandr Valialkin
da2e0e29a4
docs/CHANGELOG.md: document e3a91b186a
2021-11-02 18:39:14 +02:00
Aliaksandr Valialkin
d1eb87c831
app/{vmagent,vminsert}: add ability to restrict access to /config page with authKey query arg
...
The authKey can be configured via `-configAuthKey` command-line flag.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1764
2021-11-01 16:44:54 +02:00
Aliaksandr Valialkin
701973877f
docs/Articles.md: add a link to https://valyala.medium.com/how-to-optimize-promql-and-metricsql-queries-85a1b75bf986
2021-10-29 14:02:51 +03:00
Aliaksandr Valialkin
1a16dab9e1
docs/vmauth.md: typo fix
2021-10-28 14:06:00 +03:00
Aliaksandr Valialkin
bb87949d5c
lib/protoparser/influx: automatically detect timestamp precision depending on the number of decimal digits in the timestamp
2021-10-28 12:47:22 +03:00
Aliaksandr Valialkin
acfda6d8fd
app/vmbackupmanager: fix links to images
...
This is a follow-up after bd6b8f7e31
2021-10-27 21:35:52 +03:00
Aliaksandr Valialkin
74b8af9891
lib/promscrape: add collapse and expand buttons per each group of targets from the same scrape job
2021-10-27 20:03:24 +03:00
Aliaksandr Valialkin
1952ab99aa
all: fix build issues and tests for Apple M1
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1653
2021-10-27 15:06:34 +03:00
Aliaksandr Valialkin
9ec0175e83
docs/CHANGELOG.md: mention the issue about missing proxy_url config option at /config page
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1755
2021-10-26 22:06:35 +03:00
Aliaksandr Valialkin
4821adfd95
lib/promscrape: properly show proxy_url option value at /config page
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1755
2021-10-26 21:23:54 +03:00
Dima Lazerka
e706fb5686
Fix doc: vmbackup splits by 1 GiB not 100 MB ( #1756 )
...
This is a follow-up for bdd0a1cdb2
2021-10-26 19:19:49 +03:00
Aliaksandr Valialkin
a7e3cbd6ad
docs/CHANGELOG.md: document 3dbdf1632e
2021-10-25 12:16:37 +03:00
Aliaksandr Valialkin
d5825f13d3
docs/Cluster-VictoriaMetrics.md: add links with the explanation of active time series and series churn rate
2021-10-24 18:40:19 +03:00
Aliaksandr Valialkin
6b6a4ca51d
docs/CaseStudies.md: fix a link to AbisoGaming case study
2021-10-24 18:36:58 +03:00
Aliaksandr Valialkin
8d0fafc377
docs/CHANGELOG.md: typo fix
2021-10-22 21:11:54 +03:00
Aliaksandr Valialkin
7f7cac20c1
docs/CHANGELOG.md: cut v1.68.0
2021-10-22 19:37:48 +03:00
Aliaksandr Valialkin
a69f1baa13
docs/vmauth.md: make docs-sync
2021-10-22 19:21:34 +03:00
Aliaksandr Valialkin
013d626889
app/vmauth: add ability to specify http headers to send in requests to backends
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1736
2021-10-22 19:10:29 +03:00
Aliaksandr Valialkin
7e88713ca3
docs/CHANGELOG.md: document 43a7984cd8
2021-10-22 14:00:20 +03:00
Aliaksandr Valialkin
2876137c92
lib/promscrape: reduce memory usage if -promscrape.noStaleMarkers command-line flag is passed
...
Do not store in memory the response from the last scrape per each target if -promscrape.noStaleMarkers option is enabled.
This should reduce memory usage when the scraped targets return large responses.
2021-10-22 13:10:29 +03:00
Aliaksandr Valialkin
8568003bb1
docs/CHANGELOG.md: document a3684fe3de
2021-10-22 12:28:01 +03:00
Yury Molodov
2b266cb87e
vmui: query history ( #1732 )
...
* feat: add query history
* fix: change detect keyUp for nav query history
* feat: set default query history
* app/vmselect/vmui: `make vmui-update`
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2021-10-22 12:21:22 +03:00
Aliaksandr Valialkin
8ad95f0db7
lib/httpserver: expose command-line flags at /flags page
...
This should simplify debugging.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1695
2021-10-20 00:45:09 +03:00
Aliaksandr Valialkin
35a5eaeeb1
docs/Single-server-VictoriaMetrics.md: add a link to VMUI at VictoriaMetrics playground
2021-10-19 14:41:53 +03:00
Aliaksandr Valialkin
0d48b89afe
docs/CHANGELOG.md: document 146a5b504c
2021-10-19 11:25:02 +03:00
Aliaksandr Valialkin
c64a134146
docs/CHANGELOG.md: document cbcc622786
2021-10-19 08:56:23 +03:00
Yury Molodov
a3e09a57c2
vmui: features ( #1711 )
...
* feat: initial uPlot graph
* feat: add zoom/pan for graph
* fix: add zoom by ctrl/mac
* fix: remove unused code
* feat: add toggle cache for fetch
* feat: add fix y-axis limits
* fix: stop point events while panning
* fix: change getting cursor position when scaling
* feat: add cursor tooltip to graph
* fix: uninstall chart.js
* fix: change link for create an issue
* fix: set default cache value to true
* app/vmalert: follow-up after 0e2486df565416e18007
2021-10-18 15:16:57 +03:00
Alexander Rickardsson
0e2486df56
vmalert: add disablePathAppend to remote read ( #1712 )
...
* vmalert: add disablePathAppend to remoteRead
* docs: add docs for remoteRead.disablePathAppend
2021-10-18 10:24:52 +03:00
Aliaksandr Valialkin
c37f285466
lib/promscrape: set honor_timestamps: true by default if this option isnt set explicitly in scrape configs
...
This aligns the behavior to Prometheus - see https://prometheus.io/docs/prometheus/latest/configuration/configuration/#scrape_config
2021-10-16 20:49:08 +03:00
Aliaksandr Valialkin
dfc719e012
docs/CaseStudies.md: add Smarkets case study
2021-10-16 19:57:23 +03:00
Aliaksandr Valialkin
a1e54fa2c9
docs/CaseStudies.md: add Fly.io case study
2021-10-16 19:45:44 +03:00
Aliaksandr Valialkin
47c6baf5ea
docs/CaseStudies.md: add a case study for Razorpay
2021-10-16 19:36:33 +03:00
Aliaksandr Valialkin
3e9ffb6e33
docs/CaseStudies.md: add AbiosGaming
2021-10-16 19:26:04 +03:00
Aliaksandr Valialkin
ede9dd43e8
docs/CaseStudies.md: add Percona case study
2021-10-16 19:10:38 +03:00
Aliaksandr Valialkin
c055bc478c
lib/promscrape: expose promscrape_series_limit_max_series and promscrape_series_limit_current_series metrics per each scrape target with the enabled unique series limiter
2021-10-16 18:47:13 +03:00
Aliaksandr Valialkin
9866dd95c1
lib/promscrape: store the full response in stream parsing mode in scrapeWork.lastScrape byte slice
...
This allows sending staleness marks and properly calculate scrape_series_added metric in stream parsing mode
at the cost of the increased memory usage, since now the potentially big response is kept
in the lastScrape byte slice per each scrapeWork.
In practice the memory usage increase shouldn't be big, since the response size
is usually much smaller than the parsed metrics from this response after the relabeling,
which usually adds a big pile of target-specific labels per each metric.
2021-10-15 15:39:23 +03:00
Aliaksandr Valialkin
0db0410237
docs/FAQ.md: improve wording on why MetricsQL isnt 100% compatible with PromQL
2021-10-14 16:22:43 +03:00
Aliaksandr Valialkin
78425561ce
docs/CHANGELOG.md: document the change at 7fcbd3fa4b
2021-10-14 14:37:44 +03:00
Aliaksandr Valialkin
1ac12597fa
docs/FAQ.md: add an entry explaining why MetricsQL isn't 100% compatible with PromQL
2021-10-14 12:50:31 +03:00
Aliaksandr Valialkin
bbd34fa15e
lib/promscrape: add -promscrape.minResponseSizeForStreamParse command-line option for automatic switching to stream parsing mode when scraping targets with big responses
...
This should reduce memory usage when vmagent scrapes targets with non-uniform response sizes.
This is common case in Kubernetes monitoring.
2021-10-14 12:29:35 +03:00
Aliaksandr Valialkin
1a7287c408
lib/promscrape: return error if sample_limit or series_limit options are set when stream parsing mode is enabled
2021-10-14 12:11:23 +03:00
Aliaksandr Valialkin
1c17fe70e0
docs/CHANGELOG.md: document e3c8304deb
2021-10-13 16:00:50 +03:00
Aliaksandr Valialkin
e3c8304deb
lib/promscrape: add ability to show the original labels for discovered targets at /targets page
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1698
2021-10-13 15:59:58 +03:00
Aliaksandr Valialkin
3d61a10367
docs/MetricsQL.md: add missing blank line before the link to github.com/VictoriaMetrics/metricsql package
2021-10-13 15:10:54 +03:00
Aliaksandr Valialkin
9882cda8b9
lib/promscrape: shard targets among cluster nodes after relabeling is applied
...
This guarantees that targets with the same set of labels go to the same vmagent node.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1687#issuecomment-940629495
2021-10-12 17:06:00 +03:00
Aliaksandr Valialkin
5a58c041c2
app/vmagent: expose -promscrape.config contents at /config page as Prometheus does
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1695
2021-10-12 16:25:37 +03:00
Aliaksandr Valialkin
4f242980be
docs/FAQ.md: add a solution against high churn rate
2021-10-12 10:32:39 +03:00
Roman Khavronenko
2c6d86226f
docs: mention "PromQL compliance" in MetricsQL docs ( #1691 )
2021-10-11 21:21:29 +03:00
Aliaksandr Valialkin
a5001b9c20
app/vmselect/promql: add atan2 binary operator, which is going to be added in Prometheus 2.31
...
See https://github.com/prometheus/prometheus/pull/9248
2021-10-11 21:15:53 +03:00
Aliaksandr Valialkin
81c6720392
app/vmselect/promql: add missing trigonometric functions, which are going to be added in Prometheus 2.31
...
See https://github.com/prometheus/prometheus/issues/9233
2021-10-11 21:01:33 +03:00
Aliaksandr Valialkin
8679ba71dd
docs/MetricsQL.md: clarify docs for union() function
2021-10-11 17:40:44 +03:00
Denys Holius
dd4038f0e5
Added some fixes ( #1690 )
...
* removed not needed description
* added some fixes and fixed typos
2021-10-11 11:21:07 +03:00
Aliaksandr Valialkin
986bed8261
docs/MetricsQL.md: add a link to https://medium.com/@romanhavronenko/victoriametrics-promql-compliance-d4318203f51e
2021-10-11 11:00:56 +03:00
Roman Khavronenko
9b557a88fc
docs: add "PromQL compliance" article ( #1689 )
...
* docs: add "PromQL compliance" article
* Update docs/Articles.md
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2021-10-11 10:58:34 +03:00
Aliaksandr Valialkin
92b92d4d2c
app/vmselect/promql: consistently return the same set of time series from limitk() function
...
This is the expected behaviour by most users.
2021-10-08 19:53:52 +03:00
Aliaksandr Valialkin
001750c239
lib/storage: fix unaligned access on 32-bit architectures.
...
The bug has been introduced at a171916ef5
2021-10-08 19:43:03 +03:00
Denys Holius
4b0cefc4bd
Added fixes and improvements ( #1677 )
...
* added guide for VM operator
* Update docs/guides/getting-started-with-vm-operator.md
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
* Update docs/guides/getting-started-with-vm-operator.md
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
* Fixed different typos and added improvements from proposals
* move remoteWrite.url to other place
* fixed typo
* rephrased vminsert explanation
* remove not needed parameters for default setup
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
2021-10-08 18:57:36 +03:00
Aliaksandr Valialkin
0a3a774202
docs/CHANGELOG.md: cut v1.67.0
2021-10-08 16:00:33 +03:00
Aliaksandr Valialkin
0ff8fcac6a
app/vmui: follow-up after 7bfb44113e
...
* Run `vmui-update`
* Document the changes in README.md and CHANGELOG.md
2021-10-08 15:09:29 +03:00
Aliaksandr Valialkin
cf5cbd1c70
app/{vminsert,vmstorage}: follow-up after a171916ef5
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/269
2021-10-08 14:35:49 +03:00
Aliaksandr Valialkin
a19e7c7ce8
app/vminsert: fix uneven distribution of time series among storage nodes
...
Use distinct seed for distribution hash calculations on the second level of vminsert nodes.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1672
2021-10-07 12:23:39 +03:00
Aliaksandr Valialkin
a71c9ad650
docs/guides: follow-up after 05a1396247
2021-10-06 14:46:46 +03:00
Thomas Danielsson
05a1396247
fix: typo metric_relabel_configs ( #1674 )
...
metric_ralabel_configs -> metric_relabel_configs
2021-10-06 14:45:39 +03:00
Ziqi Zhao
402c995d6d
fix some typos ( #1678 )
...
Co-authored-by: 柘远 <zzq237937@alibaba-inc.com>
2021-10-06 14:43:10 +03:00
Aliaksandr Valialkin
c7c966d0e9
docs/vmagent.md: update docs after 3e9a939a990c8b608414388c96f68eb062364ae7
2021-10-05 10:23:33 +03:00
Aliaksandr Valialkin
9515e58e28
docs/vmagent.md: document how to write data to Kafka
2021-09-30 17:45:53 +03:00
Aliaksandr Valialkin
0e3de5a0cc
app/vmselect/promql: add topk_last and bottomk_last functions
2021-09-30 13:22:52 +03:00
Aliaksandr Valialkin
6d9f1d4227
app/vminsert: document that -relabelConfig is reloaded on SIGHUP signal
2021-09-29 21:18:58 +03:00
Aliaksandr Valialkin
2b623ae302
docs/CHANGELOG.md: link to Kafka integration docs
2021-09-29 12:31:23 +03:00
Aliaksandr Valialkin
d80d72efec
app/{vmbackup,vmrestore}: switch from gcs://... to gs://... urls for backups to GCS
...
The `gs://` urls are commonly used, so prefer them instead of `gcs://` urls,
while leaving support for `gcs://` urls for backwards compatibility.
2021-09-29 12:10:29 +03:00
Aliaksandr Valialkin
396e233ac1
docs/vmagent.md: update Telegraf config in the section about Kafka
2021-09-29 11:21:15 +03:00
Aliaksandr Valialkin
0e5ab52908
docs/vmagent.md: add docs about reading metrics from Kafka
2021-09-29 01:46:12 +03:00
Aliaksandr Valialkin
ead59bdebf
docs/CHANGELOG.md: document the bugfix from de810031bf
2021-09-29 00:41:35 +03:00
Aliaksandr Valialkin
50ec259750
docs/CHANGELOG.md: document 3d17112a7e
2021-09-29 00:33:08 +03:00
Aliaksandr Valialkin
91b3c601bc
app/{vminsert,vmagent}: add ability to ingest data via DataDog "submit metrics" API
...
See https://docs.datadoghq.com/api/latest/metrics/#submit-metrics
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/206
2021-09-29 00:13:08 +03:00
Yury Molodov
a64155d91e
vmui: use Chart.js as default engine for graph ( #1634 )
...
* feat: add Plotly as default engine for graph
* fix: remove unused components
* feat: use Chart.js as default engine graph
* fix: correct styles for loader
* feat: add zoom/pan for chart
* feat: add height for chart
* fix: remove unused code
* fix: remove empty units from duration
* fix: change debounce for pan to 500ms
* fix: add utility for plugins register globally
* fix: optimize render graph
* feat: add buffer data for zoom
* fix: add limits for zoom in/out
* fix: change update data while zooming
* app/vmselect: `make vmui-update`
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2021-09-27 22:26:14 +03:00
Aliaksandr Valialkin
2efe0acfc9
app/vmselect/promql: add rollup_scrape_interval(m[d]) function
...
It calculates the min, max and avg scrape intervals for m over the given lookbehind window d
2021-09-27 19:21:24 +03:00
Aliaksandr Valialkin
c4c77aa2dd
app/vmselect/promql: follow-up after 526dd93b32
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1625
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1612
2021-09-27 18:55:39 +03:00
Aliaksandr Valialkin
1b23224f9c
docs/BestPractices.md
...
docs/BestPractices.md: update the doc
2021-09-27 17:51:21 +03:00
Aliaksandr Valialkin
e564411a62
app/vmselect/promql: align the behavior of or, and and unless operators with on (labels) modifier to Prometheus
...
Previously VictoriaMetrics could return unexpected result of the right-hand side operand
had multiple time series with the given set of labels mentioned in `on(labels)`.
See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/1643
2021-09-24 00:46:25 +03:00
Aliaksandr Valialkin
9f19649672
docs/CHANGELOG.md: cut v1.66.2
2021-09-23 22:53:36 +03:00
Aliaksandr Valialkin
718eca33ab
lib/storage: properly handle {__name__=~"prefix(suffix1|suffix2)",other_label="..."} queries
...
They were broken in the commit 00cbb099b6https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1644
2021-09-23 21:48:51 +03:00
Aliaksandr Valialkin
c5bb95a417
docs: make docs-sync
2021-09-23 20:51:35 +03:00
Aliaksandr Valialkin
f5896b7420
docs/CHANGELOG.md: document 0e35fc9538
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1641
2021-09-23 20:46:23 +03:00
Aaron France
6f061dab19
fix: typo in vmagent.md ( #1642 )
2021-09-23 16:51:02 +03:00
Aliaksandr Valialkin
a0313c046b
lib/promscrape: add vm_promscrape_max_scrape_size_exceeded_errors_total metric for counting of the failed scrapes due to the exceeded response size
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1639
2021-09-23 14:47:54 +03:00
Aliaksandr Valialkin
d5c2741e8f
docs/CaseStudies.md: add a case study for Grammarly
2021-09-23 13:11:48 +03:00
Aliaksandr Valialkin
73cd74075d
docs/Articles.md: add https://cer6erus.medium.com/superset-bi-with-victoria-metrics-a109d3e91bc6
2021-09-23 10:43:29 +03:00
Aliaksandr Valialkin
99a6c212e8
docs/CaseStudies.md: fix a link to third-party articles
2021-09-22 03:52:35 +03:00
Aliaksandr Valialkin
9b3d1a1996
docs/CHANGELOG.md: cut v1.66.1
2021-09-22 01:47:05 +03:00
Aliaksandr Valialkin
a13c3de36f
docs/CHANGELOG.md: document 9ca1cbced1
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1635
2021-09-21 23:17:08 +03:00
Aliaksandr Valialkin
207c5760ce
lib/promrelabel: fix parsing regex: true in relabeling rules
2021-09-21 23:00:53 +03:00
Aliaksandr Valialkin
a22aa0608b
app/vmselect: fix accessing /graphite/* endpoints
2021-09-21 13:56:35 +03:00
Aliaksandr Valialkin
94148d5ad7
docs/vmagent.md: typo fix
2021-09-20 16:49:20 +03:00
Aliaksandr Valialkin
51657b1e04
docs/vmagent.md: typo fixes in Prometheus staleness markers docs
2021-09-20 16:44:09 +03:00
Aliaksandr Valialkin
76811c2f60
docs/CHANGELOG.md: cut v1.66.0
2021-09-20 15:20:25 +03:00
n4mine
1ac8d55147
fix: typo, dddresses -> addresses ( #1630 )
2021-09-20 14:28:59 +03:00
Aliaksandr Valialkin
a06ff456f8
docs/Articles.md: add a link to Open-source strategy at VictoriaMetrics
2021-09-20 11:46:10 +03:00
Aliaksandr Valialkin
9a3d0c43b5
app/vmselect/promql: add quantiles_over_time("phiLabel", phi1, ..., phiN, m[d]) function for calculating multiple quantiles at once
2021-09-17 23:35:10 +03:00
Aliaksandr Valialkin
e1e5a20b36
docs/CHANGELOG.md: document 0e09fdb8b0
2021-09-17 18:47:06 +03:00
Aliaksandr Valialkin
2951dd0a57
app/vmselect/promql: add histogram_quantiles("phiLabel", phi1, ..., phiN, buckets) function
...
This function calculates multiple quantiles over the given buckets at once
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1573
2021-09-17 13:32:39 +03:00
Aliaksandr Valialkin
8c504d6efa
docs/CHANGELOG.md: document the change in enterprise apps, which allows passing -version without -eula flag
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1621
2021-09-17 12:37:45 +03:00
Aliaksandr Valialkin
948fb638f5
docs/FAQ.md: extend VictoriaMetrics vs TimescaleDB section with real user experience
...
See also https://github.com/timescale/promscale/issues/427 , which is mentioned in the https://abiosgaming.com/press/high-cardinality-aggregations/
2021-09-16 20:46:25 +03:00
Roman Khavronenko
f83fa31985
docs: fix indentation for FAQ document ( #1620 )
2021-09-16 13:59:22 +03:00
Aliaksandr Valialkin
e60dfc96ff
app/vmselect/promql: add mad(q) and outliers_mad(tolerance, q) functions to MetricsQL
2021-09-16 13:33:53 +03:00
Aliaksandr Valialkin
44b01fff13
app/{vminsert,vmselect}: automatically add missing port in -storageNode lists passed to vminsert and vmselect
...
This should simplify manual setup of the cluster according to https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#cluster-setup
2021-09-15 18:08:30 +03:00
Aliaksandr Valialkin
06ed694ad9
docs/CHANGELOG.md: document 777ff75874
2021-09-15 17:45:08 +03:00
Aliaksandr Valialkin
68ea3d18f7
vendor: update github.com/valyala/histogram from v1.1.2 to v1.2.0
...
This fixes the non-repeatable quantile_over_time() results when the number of input samples exceeds 1000.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1612
2021-09-15 09:34:07 +03:00
Roman Khavronenko
84b41e498f
docs: add "Choosing a Time Series Database for High Cardinality Aggregations" article ( #1617 )
2021-09-15 01:51:56 +03:00
Aliaksandr Valialkin
3e1683756b
docs/vmalert.md: follow-up after 68721f6e7d
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1608
2021-09-14 14:47:47 +03:00
Dima Lazerka
56069a3022
Remove port 3000 and add https to play-grafana link ( #1616 )
...
* Remove port 3000 and add https to play-grafana link
* Fix typo
Co-authored-by: Dzmitry Lazerka <dlazerka@gmail.com>
2021-09-14 14:24:30 +03:00
Aliaksandr Valialkin
8f685d81c6
lib/storage: follow up after 00cbb099b6
2021-09-14 14:16:25 +03:00
Aliaksandr Valialkin
adedc83b3b
app/vmauth: do not log invalid auth tokens by default for security reasons
...
The logging can be enabled by passing `-logInvalidAuthTokens` command-line flag to vmauth
2021-09-14 12:20:03 +03:00
Aliaksandr Valialkin
e46bd9e47f
docs/Single-server-VictoriaMetrics.md: link to cardinality limiter docs in vmagent
2021-09-13 21:26:59 +03:00
Aliaksandr Valialkin
07b9c7994f
docs/vmagent.md: mention out of order sample errors, which are typically emitted by Thanos, Cortex or Prometheus
2021-09-13 19:36:31 +03:00
Aliaksandr Valialkin
8a6a36429a
app/vminsert/netstorage: disable rerouting by default
...
Production clusters work more stable with the disabled rerouting during rolling restarts and/or
during spikes in time series churn rate. So it would be better disabling the rerouting by default.
The re-routing can be enabled by passing `-disableRerouting=false` command-line flag to `vminsert` nodes.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/791
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1054
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1165
2021-09-13 18:51:56 +03:00
Aliaksandr Valialkin
c4f11a49f8
docs/CHANGELOG.md: document 5494bc02a6
2021-09-13 17:11:23 +03:00
Aliaksandr Valialkin
7f0a8d4bdb
docs: consistency renaming: Influx -> InfluxDB
2021-09-13 17:05:16 +03:00
Aliaksandr Valialkin
b9727a36dc
docs/vmbackup.md: update the outdated link to vmbackupmanager
2021-09-13 14:16:53 +03:00
Aliaksandr Valialkin
d1a16e0891
app/vmselect/promql: use Prometheus-compatible label value formatting for count_values function
2021-09-13 13:48:06 +03:00
Aliaksandr Valialkin
fb6ed0ce19
lib/promscrape/discovery/docker: support host networking mode
...
See https://github.com/prometheus/prometheus/issues/9116
2021-09-13 13:30:16 +03:00
Aliaksandr Valialkin
6295861acd
lib/promscrape/discovery/kubernetes: properly use https scheme for wildcard TLS certificates in ingress target discovery
2021-09-13 13:03:42 +03:00
Aliaksandr Valialkin
728c4c3841
lib/promscrape: generate scrape_timeout_seconds metric per each scrape target in the same way as Prometheus 2.30 does
...
See https://github.com/prometheus/prometheus/pull/9247
2021-09-12 15:20:44 +03:00
Aliaksandr Valialkin
48e3e6c8df
lib/promscrape: add ability to configure scrape_timeout and scrape_interval via relabeling
...
See https://github.com/prometheus/prometheus/pull/8911
2021-09-12 13:33:41 +03:00
Aliaksandr Valialkin
f3e89754a9
lib/promscrape: reduce CPU usage for common case when calculating scrape_series_added metric
...
Also reduce CPU usage when applying `series_limit` to scrape targets with constant set of metrics.
The main idea is to perform the calculations on scrape_series_added and series_limit
only if the set of metrics exposed by the target has been changed.
Scrape targets rarely change the set of exposed metrics,
so this optimization should reduce CPU usage in general case.
2021-09-12 12:53:14 +03:00
Aliaksandr Valialkin
674a6eee6c
docs/Single-server-VictoriaMetrics.md: refer to relabeling section for vmagent
...
This removes duplicate docs about additional relabeling actions supported by VictoriaMetrics components
2021-09-12 11:39:19 +03:00
Aliaksandr Valialkin
77168e3e94
docs/vmagent.md: sync with app/vmagent/README.md by running make docs-sync
2021-09-11 11:04:42 +03:00
Aliaksandr Valialkin
9286107e82
lib/promscrape: send stale markers for disappeared metrics like Prometheus does
2021-09-11 10:51:04 +03:00
Aliaksandr Valialkin
cfed015bb6
docs/vmalert.md: typo fix in Multitenancy chapter
2021-09-10 17:57:14 +03:00
Aliaksandr Valialkin
f4dead529f
lib/storage: properly search series by multiple tag filters matching empty labels such as foo{bar=~"baz|",x=~"y|"}
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1601
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/395
2021-09-09 21:09:21 +03:00
Aliaksandr Valialkin
ea943911bc
app/vmselect/promql: keep metric name in rollup_candlestick results, since they don't change the original series meaning
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1600
2021-09-09 19:21:18 +03:00
Aliaksandr Valialkin
f27980dcb3
docs/CHANGELOG.md: typo fix
2021-09-09 18:57:30 +03:00
Aliaksandr Valialkin
4aeb8db83f
lib/promscrape: add ability to set series_limit and stream_parse options via relabeling
...
This allows managing these options on a per-target basis.
Typical use case: to manage these options for pods via Kubernetes annotations.
2021-09-09 18:49:39 +03:00
Aliaksandr Valialkin
d2708a1fb7
docs/vmagent.md: typo fix in Relabeling chapter
2021-09-09 16:39:40 +03:00
Aliaksandr Valialkin
d6bd956930
lib/promrelabel: add keep_metrics and drop_metrics actions to relabeling rules
...
These actions simlify metrics filtering. For example,
- action: keep_metrics
regex: 'foo|bar|baz'
would leave only metrics with `foo`, `bar` and `baz` names, while the rest of metrics will be deleted.
The commit also makes possible to split long regexps into multiple lines. For example, the following config is equivalent to the config above:
- action: keep_metrics
regex:
- foo
- bar
- baz
2021-09-09 16:18:21 +03:00
Aliaksandr Valialkin
3a827b98cd
docs/vmalert.md: make docs-sync after 21f022e5f0
2021-09-09 16:16:25 +03:00
Aliaksandr Valialkin
a8053d9fc6
docs/MetricsQL.md: add a link to VictoriaMetrics github
2021-09-08 00:14:59 +03:00
Aliaksandr Valialkin
e6c9869d86
app/vmalert: follow-up after 21f022e5f0
2021-09-07 22:43:37 +03:00
Aliaksandr Valialkin
6fbaf8f978
docs/CHANGELOG.md: document 42e07cfaea
2021-09-07 22:34:39 +03:00
Aliaksandr Valialkin
e34f7081d0
docs/vmagent.md: add API path for Prometheus text exposition format
2021-09-07 16:14:51 +03:00
Aliaksandr Valialkin
0166eae7c4
docs/Articles.md: add a link to case studies
2021-09-06 10:57:59 +03:00
Aliaksandr Valialkin
5e3ef376b5
docs/Articles.md: add an url to https://www.vultr.com/docs/install-and-configure-victoriametrics-on-debian
2021-09-03 11:49:37 +03:00
Aliaksandr Valialkin
ef27786e37
docs/Single-server-VictoriaMetrics.md: fix a link multitenancy docs for cluster version in VictoriaMetrics
2021-09-02 17:43:35 +03:00
Aliaksandr Valialkin
f529058d3a
docs/CHANGELOG.md: cut v1.65.0
2021-09-01 17:12:32 +03:00
Aliaksandr Valialkin
bddd1c35e2
docs/FAQ.md: add questions on how to migrate data from various systems (Prometheus, InfluxDB, OpenTSDB, Graphite) to VictoriaMetrics
2021-09-01 16:47:30 +03:00
Aliaksandr Valialkin
ed818fceef
docs: update -help output for victoria-metrics and vmagent after f77dde837a
2021-09-01 16:34:32 +03:00
Aliaksandr Valialkin
f77dde837a
lib/promscrape: add the ability to limit the number of unique series per each scrape target
...
The number of series per target can be limited with the following options:
* Global limit with `-promscrape.maxSeriesPerTarget` command-line option.
* Per-target limit with `max_series: N` option in `scrape_config` section.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1561
2021-09-01 16:03:59 +03:00
Aliaksandr Valialkin
111ea89a7d
docs: make docs-sync
2021-09-01 12:02:34 +03:00
Aliaksandr Valialkin
9e41b05401
docs/CHANGELOG.md: document eff940aa76
2021-09-01 12:00:02 +03:00
Aliaksandr Valialkin
fce87bfe8d
docs/CHANGELOG.md: document 7c70dcbe3b
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1471
2021-09-01 11:56:23 +03:00
Nikolay
7c70dcbe3b
adds external_labels per group for vmalert ( #1485 )
...
* adds external_label per group for vmalert
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1471
2021-08-31 14:52:34 +03:00
Aliaksandr Valialkin
6e085e6dac
docs/Single-server-VictoriaMetrics.md: remove outdated link to VictoriaMetrics wiki
...
VictoriaMetrics wiki became outdated after publishing all the docs at https://docs.victoriametrics.com
2021-08-31 11:48:32 +03:00
Aliaksandr Valialkin
8b228a5873
docs/CHANGELOG.md: add a link to Prometheus staleness tracking
2021-08-31 11:48:32 +03:00
Aliaksandr Valialkin
5c63d69454
lib/promscrape/discovery/kubernetes: return back support role: endpointslices, since it is used by VictoriaMetrics operator
...
This is a follow up commit after 31b42b30b6
2021-08-29 12:37:03 +03:00
Aliaksandr Valialkin
db330232ac
lib/protoparser/opentsdb: follow-up after 8ee75ca45a
2021-08-29 11:49:21 +03:00
Aliaksandr Valialkin
31b42b30b6
lib/promscrape/discovery/kubernetes: rename role: endpointslices to role: endpointslice to be consistent with Prometheus
...
See 2ec6c7dbb8/discovery/kubernetes/kubernetes.go (L99)
2021-08-29 11:23:08 +03:00
Aliaksandr Valialkin
2e001db4de
lib/promscrape/discovery/kubernetes: use v1 API instead of v1beta1 API for role: ingress and role: endpointslices
...
This should fix service discovery for these roles in Kubernetes v1.22 and newer versions.
See https://kubernetes.io/docs/reference/using-api/deprecation-guide/#ingress-v122
The corresponding change in Prometheus - https://github.com/prometheus/prometheus/pull/9205
2021-08-29 11:16:59 +03:00
Aliaksandr Valialkin
189507d9d0
docs/Single-server-VictoriaMetrics.md: mention that downsampling doesnt improve query performance on high churn rate
2021-08-27 18:50:26 +03:00
Aliaksandr Valialkin
5ea689d61b
app/vmselect/promql: add quantile("phiLabel", phi1, ..., phiN, q) aggregate function to MetricsQL
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1573
2021-08-27 18:37:20 +03:00
Aliaksandr Valialkin
bec18e4fe9
app/vmselect: add -search.disableAutoCacheReset command-line option for disabling automatic cache reset when a sample with old timestamp outside -search.cacheTimestampOffset is inserted
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1570
2021-08-27 17:15:31 +03:00
Aliaksandr Valialkin
67189be1cb
docs/{vmgateway,vmbackupmanager}: mention that enterprise binaries are free for download and evaluation
2021-08-27 14:54:09 +03:00
Aliaksandr Valialkin
321da535fa
docs: link to active time series, churn rate and high cardinality questions
2021-08-27 14:44:53 +03:00
Aliaksandr Valialkin
c8c153fb91
docs/CHANGELOG.md: document the bugfix for possible timeout error in vmbackupmanager when making snapshots
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1571
2021-08-27 13:04:06 +03:00
Aliaksandr Valialkin
2bc79042f6
docs: mention that enterprise binaries can be downloaded and evaluated for free
2021-08-27 12:48:14 +03:00
Aliaksandr Valialkin
2bef940add
docs/vmagent.md: document the ability to load scrape configs from multiple files
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1559
2021-08-26 09:13:14 +03:00
Aliaksandr Valialkin
10f960fa0c
lib/promscrape: add ability to load scrape configs from multiple files
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1559
2021-08-26 08:51:16 +03:00
Aliaksandr Valialkin
e24203cde8
docs/CHANGELOG.md: document 48f33d098b
2021-08-25 13:31:35 +03:00
Aliaksandr Valialkin
9fc9d76a7f
docs/Cluster-VictoriaMetrics.md: mention that the -replicationFactor at vmselect is an optional parameter
2021-08-25 13:10:57 +03:00
Aliaksandr Valialkin
c27ee35c5c
lib/promscrape: expose promscrape_discovery_http_errors_total metric for tracking errors per each http_sd config
2021-08-25 13:05:49 +03:00
Aliaksandr Valialkin
ffc0ab1774
lib/{mergeset,storage}: improve the detection of the needed free space for background merge
...
This should prevent from possible out of disk space crashes during big merges.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1560
2021-08-25 09:35:44 +03:00
Aliaksandr Valialkin
a287a48634
docs/FAQ.md: add more entries for frequently asked questions
...
The following topics are covered:
* Active time series
* High cardinality
* High churn rate
* Slow inserts
2021-08-24 11:34:44 +03:00
Aliaksandr Valialkin
8358890e33
docs/MetricsQL.md: typo fix: histogram_qunatile -> histogram_quantile
2021-08-23 23:08:16 +03:00
Aliaksandr Valialkin
7c57745f40
docs/MetricsQL.md: fix the indentation for median function
2021-08-23 12:04:31 +03:00
Aliaksandr Valialkin
a78672f95a
docs/MetricsQL.md: typo fix: convesions->conversions
2021-08-23 12:02:03 +03:00
Aliaksandr Valialkin
17a1241022
docs/MetricsQL.md: typo fixes
2021-08-23 11:59:12 +03:00
Aliaksandr Valialkin
60ac3e1e46
docs/MetricsQL.md: rehaul the documentation on MetricsQL
...
* Document all the functions supported by MetricsQL, including PromQL functions
* Group functions by their type: rollup functions, transform functions, label manipulation functions and aggregate functions.
* Document implicit query transformations.
2021-08-23 11:45:52 +03:00
Aliaksandr Valialkin
0078486ea7
app/vmselect/promql: rename sign() function to sgn() in order to be consistent with Prometheus
...
See https://github.com/prometheus/prometheus/pull/8457 for details.
2021-08-23 11:45:51 +03:00
Aliaksandr Valialkin
69c291353b
deployment/docker: update Go builder from Go1.16.0 to Go1.17.0
...
This improves data ingestion and query performance by up to 5% according to benchmarks.
See https://go.dev/blog/go1.17
2021-08-21 22:20:49 +03:00
Aliaksandr Valialkin
d5622b32e2
lib/promscrape: reduce memory and CPU usage when Prometheus staleness tracking is enabled for metrics from deleted / disappeared scrape targets
...
Store the scraped response body instead of storing the parsed and relabeld metrics.
This should reduce memory usage, since the response body takes less memory than the parsed and relabeled metrics.
This is especially true for Kubernetes service discovery, which adds many long labels for all the scraped metrics.
This should also reduce CPU usage, since the marshaling of the parsed
and relabeld metrics has been substituted by response body copying.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1526
2021-08-21 21:17:26 +03:00
Aliaksandr Valialkin
2288e75f03
docs/vmalert.md: run make docs-sync after 9ee3d0378f
2021-08-21 20:24:56 +03:00
Aliaksandr Valialkin
6ffbb46aef
docs/CHANGELOG.md: document 9ee3d0378f
2021-08-21 20:20:08 +03:00
Aliaksandr Valialkin
c14edc860b
docs/CHANGELOG.md: document b5d6a0e499
2021-08-19 14:03:20 +03:00
Aliaksandr Valialkin
80ddade4ed
docs/CHANGELOG.md: clarify the change, which adds -search.noStaleMarkers command-line flag
2021-08-19 13:56:04 +03:00
Aliaksandr Valialkin
a724229b5d
app/vmselect/promql: do not override [d] at last_over_time(m[d]) if [d] is smaller than scrape_interval
...
Since most users do not expect the overriding of explicitly set `[d]`.
2021-08-19 10:31:48 +03:00
Aliaksandr Valialkin
ce0c270e75
docs/CHANGELOG.md: cut v1.64.1
...
This is mostly bugfix release, which includes fixes for staleness handling and a security update for Alpine base image
2021-08-18 22:06:05 +03:00
Aliaksandr Valialkin
c09446a9aa
lib/promscrape: send stale markers for the previously scraped metrics on failed scrapes like Prometheus does
2021-08-18 21:59:03 +03:00
Aliaksandr Valialkin
04c3e9916d
docs/CHANGELOG.md: document 06bf21c21b
2021-08-18 14:01:04 +03:00
Aliaksandr Valialkin
cdc372bb98
app/vmselect: add -search.noStaleMarkers command-line flag for disabling stale markers handling in queries
...
This option allows reducing CPU usage a bit when VictoriaMetrics is used
for collecting and processing non-Prometheus data. For example, InfluxDB line protocol, Graphite, OpenTSDB, CSV, etc.
2021-08-18 13:59:02 +03:00
Aliaksandr Valialkin
226143f31b
lib/promscrape: add ability to disable sending Prometheus staleness markers with -promscrape.disableStaleMarkers command-line flag
...
This option can be useful when vmagent consumes too much additional memory
for staleness markers functionality and when staleness markers aren't needed.
2021-08-18 13:43:21 +03:00
Aliaksandr Valialkin
db1e62495b
app/vmselect/promql: add bitmap_and(), bitmap_or() and bitmap_xor() functions to MetricsQL
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1541
2021-08-17 13:21:21 +03:00
Aliaksandr Valialkin
277538d655
docs/Single-server-VictoriaMetrics.md: mention that vmctl can migrate data from OpenTSDB to VictoriaMetrics
2021-08-17 11:12:16 +03:00
Aliaksandr Valialkin
03c959f1df
lib/promscrape: stop scrapers for the removed targets before starting scrapers for the added targets
...
This should prevent from possible time series overlap when old target is substituted by new target (for example, during Kubernetes deployments).
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1526
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1530
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/748
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1509
2021-08-17 00:55:51 +03:00
Aliaksandr Valialkin
90434ba25b
app/vmalert: mention -remoteWrite.disablePathAppend in the description for -remoteWrite.url
2021-08-16 15:22:47 +03:00
Aliaksandr Valialkin
f37b963619
app/vmalert: follow-up for 2400f85761
2021-08-16 15:20:22 +03:00
Aliaksandr Valialkin
4547d4f692
docs/CHANGELOG.md: update urls to Prometheus 2.29 release
...
Previously these urls were pointing to rc0 release
2021-08-16 14:53:38 +03:00
Aliaksandr Valialkin
ae9f923449
docs/CHANGELOG.md: typo fix: satureated -> saturated
2021-08-16 14:53:38 +03:00
Alexander Rickardsson
2400f85761
vmalert: enable configuring explicit path ( #1536 )
...
* vmalert: allow to disable automatically added path to remote write address via disablePathAppend flag
* docs: update docs to include remoteWrite.disablePathAppend
2021-08-16 14:20:57 +03:00
Aliaksandr Valialkin
c518858145
docs/CHANGELOG.md: cut v1.64.0
2021-08-15 23:52:03 +03:00
Aliaksandr Valialkin
a0e18f06eb
lib/promscrape: restore red highlighting for DOWN targets at /targets page
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1461
2021-08-15 16:03:57 +03:00
Aliaksandr Valialkin
40a859a760
docs/CHANGELOG.md: mention the bugfix when more than 27 time series are selected at /vmui
2021-08-15 15:10:41 +03:00
Aliaksandr Valialkin
386ee5b82c
docs/CHANGELOG.md: mention that VMUI automatically fills Server URL field
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1506
2021-08-15 14:45:09 +03:00
Aliaksandr Valialkin
aefba16d5e
app/vmagent/remotewrite: expose vmagent_remotewrite_send_duration_seconds_total metric
...
This metric can be used for determining high saturation of every connection to remote storage with
an alerting query `rate(vmagent_remotewrite_send_duration_seconds_total) > 0.9s`.
This query triggers when a connection is satureated by more than 90%
2021-08-15 13:34:12 +03:00
Aliaksandr Valialkin
4401464c22
all: add support for Prometheus staleness markers
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1526
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/748
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1509
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1530
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/845
2021-08-13 12:10:17 +03:00
Aliaksandr Valialkin
9a8d1bcec5
docs/Cluster-VictoriaMetrics.md: meniton that vmagent can be used for replicating the data among multiple clusters
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1491
2021-08-12 12:47:32 +03:00
Denys Holius
81e4d644dd
added guide for HA monitoring setup in K8s via VM Cluster ( #1523 )
...
* added guide for HA monitoring setup in K8s via VM Cluster
* fixed missed divs
* fixed different typos
* Update docs/guides/k8s-ha-monitoring-via-vm-cluster.md
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
* Update docs/guides/k8s-ha-monitoring-via-vm-cluster.md
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
* Update docs/guides/k8s-ha-monitoring-via-vm-cluster.md
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
* Update docs/guides/k8s-ha-monitoring-via-vm-cluster.md
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
* Update docs/guides/k8s-ha-monitoring-via-vm-cluster.md
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
* Update docs/guides/k8s-ha-monitoring-via-vm-cluster.md
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
* Update docs/guides/k8s-ha-monitoring-via-vm-cluster.md
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
* Update docs/guides/k8s-ha-monitoring-via-vm-cluster.md
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
* Update docs/guides/k8s-ha-monitoring-via-vm-cluster.md
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
* Update docs/guides/k8s-ha-monitoring-via-vm-cluster.md
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
* Update docs/guides/k8s-ha-monitoring-via-vm-cluster.md
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
2021-08-11 11:45:42 +03:00
Aliaksandr Valialkin
755f65f4bc
app/vminsert: add vm_rpc_send_duration_seconds_total metric per each vminsert->vmstorage link
...
This metric is useful for determining high link saturation with the following alerting rule:
rate(vm_rpc_send_duration_seconds_total) > 0.9s
2021-08-11 11:44:40 +03:00
Aliaksandr Valialkin
869ff25392
docs/Cluster-VictoriaMetrics.md: update -help output for cluster components after the d375d9b878
2021-08-11 11:44:39 +03:00
Aliaksandr Valialkin
bcffd04e3a
docs: make docs-sync after e0ee69797d
2021-08-11 10:53:49 +03:00
Aliaksandr Valialkin
d375d9b878
lib/envflag: add a link to docs for -envflag.enable
2021-08-11 10:29:33 +03:00
Aliaksandr Valialkin
5ce531027f
docs/CHANGELOG.md: document new metrics added to vmalert at 7416fdaa8b
2021-08-05 10:13:08 +03:00
Aliaksandr Valialkin
c1185363ca
app/vmagent: typo fix in the description for -remoteWrite.queues
2021-08-05 10:01:35 +03:00
Aliaksandr Valialkin
d826352688
app/vmagent: follow-up after fe445f753b
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1491
2021-08-05 09:52:32 +03:00
Aliaksandr Valialkin
f07165977a
docs/Articles.md: actualize links and re-order some links
2021-08-03 16:11:49 +03:00
Aliaksandr Valialkin
50663ba41f
lib/promscrape/discovery/gce: add __meta_gce_interface_ipv4_<name> labels as in Prometheus 2.29
...
See https://github.com/prometheus/prometheus/pull/8978
2021-08-03 16:11:49 +03:00
Aliaksandr Valialkin
3cad8b4564
lib/promscrape/discovery/ec2: add __meta_ec2_availability_zone_id label as Prometheus 2.29 does
2021-08-03 16:11:49 +03:00
Aliaksandr Valialkin
e92fde7945
app/vmselect/promql: add present_over_time(m[d]) function, which will be available starting from Prometheus 2.29.0
...
See https://github.com/prometheus/prometheus/releases/tag/v2.29.0-rc.0 and https://github.com/prometheus/prometheus/pull/9097
2021-08-03 16:11:49 +03:00
Roman Khavronenko
370fe9fa2a
docs: add "Scaling to trillions of metric data points" to articles ( #1517 )
2021-08-03 11:07:45 +03:00
Roman Khavronenko
b385fa622b
docs: mention "Push Prometheus metrics to VictoriaMetrics or other exporters" article ( #1511 )
2021-08-02 17:23:10 +03:00
Roman Khavronenko
a641102ec2
docs: fix indentation for guide articles ( #1512 )
2021-08-02 17:16:58 +03:00
Aliaksandr Valialkin
66eb60f20d
docs/CaseStudies.md: typo fix: hed->had
2021-07-30 18:32:12 +03:00
Aliaksandr Valialkin
8a3c13fd53
docs/CHANGELOG.md: typo fix
2021-07-30 12:35:57 +03:00
Aliaksandr Valialkin
a3b4fc0474
docs/CHANGELOG.md: document d05cac6c98
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1486
2021-07-30 12:19:53 +03:00
Aliaksandr Valialkin
a1911e1330
app/vmselect/netstorage: unpack time series data in mostly local big chunks
...
This should improve performance on multi-CPU systems for queries selecting time series with big number of raw samples
2021-07-30 12:03:17 +03:00
Aliaksandr Valialkin
192dfbfd90
app/vmselect: follow-up for ed95bc9531
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1493
2021-07-29 09:53:28 +03:00
Aliaksandr Valialkin
e20ec090b2
docs: remove SampleSizeCalculations.md, since it is outdated and no longer used
...
There was a reference to this doc from the old victoriametrics.com site
2021-07-28 19:25:16 +03:00
Aliaksandr Valialkin
8ee8660ac4
app/vmselect: follow-up for 626073bca8
...
* Rename -search.maxMetricsPointSearch to -search.maxSamplesPerQuery, so it is more consistent with the existing -search.maxSamplesPerSeries
* Move the -search.maxSamplesPerQuery from vmstorage to vmselect, so it could effectively limit the number of raw samples obtained from all the vmstorage nodes
* Document the -search.maxSamplesPerQuery in docs/CHANGELOG.md
2021-07-28 18:00:23 +03:00
Denys Holius
9ffd70a921
Added new guide for monitoring k8s via VictoriaMetrics cluster ( #1476 )
...
* renamed and moved screenshots
* fixed cluster guide, updated helm chart versions, added values.yaml for vm single
* renamed guide files
* fixed typo
* add some fixes
* fixed typos,added guide k8s-monitoring-via-vm-cluster
* added fixes for yamls
2021-07-27 18:01:12 +03:00
Aliaksandr Valialkin
8481f4f004
docs/CHANGELOG.md: document 9d45b46f4c
2021-07-27 12:38:31 +03:00
Aaron France
fec509fe2d
fix: typo in metrics.md docs
2021-07-26 21:53:26 +03:00
Aliaksandr Valialkin
95aff47330
app/vmselect: prevent from possible deadlock when f callback blocks inside RunParallel
2021-07-26 15:47:30 +03:00
Aliaksandr Valialkin
bfb18438ec
docs/Articles.md: add links to new articles
2021-07-23 21:06:58 +03:00
Aliaksandr Valialkin
05672ffc32
app/vmselect/promql: properly handle (a op b) default N if (a op b) returns NaN series
...
The result should be a series with `N` values and `a op b` labels. Previously such series has been removed from the result.
2021-07-16 01:44:58 +03:00
Aliaksandr Valialkin
ca75432e66
app/vmselect: do not track queries with less than 1ms execution time at /api/v1/status/top_queries
...
This should improve the readability and usefullness of the /api/v1/status/top_queries when debugging slow queries
or queries that take too much cpu time.
2021-07-15 16:44:28 +03:00
Aliaksandr Valialkin
f4e81aef7e
app/vmselect/netstorage: add -search.maxSamplesPerSeries command-line option for limiting the number of samples a query can process per each series
...
This should prevent from out of memory crashes like in https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1067
2021-07-15 16:03:28 +03:00
Aliaksandr Valialkin
171d44acd8
docs/CHANGELOG.md: typo fix: suffxies->suffixes
2021-07-15 15:02:20 +03:00
Aliaksandr Valialkin
61cc13c16f
docs/CHANGELOG.md: cut v1.63.0
2021-07-15 14:02:13 +03:00
Aliaksandr Valialkin
682662b2ae
lib/storage: remove cache directory if it contains reset_cache_on_startup file
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1447
2021-07-13 17:58:51 +03:00
Aliaksandr Valialkin
8d99e94a52
docs: clarify why spare CPU and RAM resources are needed in capacity planning
2021-07-13 15:48:25 +03:00
Aliaksandr Valialkin
8d0ec47be9
docs/Cluster-VictoriaMetrics.md: clarify the docs about the needed values for -dedup.minScrapeInterval at vmselect during replication when the data is pushed from HA pair
2021-07-13 15:43:02 +03:00
Aliaksandr Valialkin
2df66dad7b
lib/httpserver: add is_set label to flag metrics
...
This label allows determining the set flags with the query `flag{is_set="true"}`
2021-07-13 15:10:13 +03:00
Aliaksandr Valialkin
a925d5a3e1
app/vmselect/promql: duration handling improvements in MetricsQL queries
...
- Support durations anywhere in MetricsQL queries. E.g. sum_over_time(m[1h])/1h is equivalent to sum_over_time(m[1h])/3600
- Support durations without suffix. E.g. rate(m[300]) is equivalent to rate(m[5m])
2021-07-12 17:16:41 +03:00
Aliaksandr Valialkin
f3a5465ece
docs/CHANGELOG.md: document the change from bfba4c28a4
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1444
2021-07-12 12:44:06 +03:00
Aliaksandr Valialkin
a684408e27
docs: update http://slack.victoriametrics.com to https://slack.victoriametrics.com
2021-07-12 10:57:16 +03:00
Aliaksandr Valialkin
f539772ca6
docs: sync with the cluster branch
2021-07-10 12:45:38 +03:00
Aliaksandr Valialkin
8c764e88f0
app/vmui: move source code from https://github.com/VictoriaMetrics/vmui to app/vmui
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1413
2021-07-09 17:15:23 +03:00
Aliaksandr Valialkin
2be340a4c9
docs: clarify what does "workload" mean in capacity planning docs
2021-07-09 12:49:53 +03:00
Aliaksandr Valialkin
c5f0b454f0
app/vmselect: follow-up after aa11ef6d3b
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1413
2021-07-07 17:43:35 +03:00
Aliaksandr Valialkin
92b8380fdf
docs/Cluster-VictoriaMetrics.md: improve capacity planning recommendations
2021-07-07 16:22:51 +03:00
Aliaksandr Valialkin
6e0553c92e
lib/mergeset: cache indexBlock items only on the second request
...
This should reduce the indexdb/indexBlocks cache size, since it won't contain one-time-wonders items.
2021-07-07 15:23:06 +03:00
Aliaksandr Valialkin
ed944313b0
app/{vminsert,vmselect}: export vminsert_request_duration_seconds and vmselect_request_duration_seconds histograms
2021-07-07 13:25:21 +03:00
Aliaksandr Valialkin
766edbc421
lib/httpserver: print full requestURI in httpserver.Errorf
...
This should simplify debugging.
2021-07-07 13:09:40 +03:00
Aliaksandr Valialkin
c55a64ba08
docs: clarify capacity planning docs
2021-07-07 12:46:55 +03:00
Roman Khavronenko
75f12bfe78
add option to add Copy button for code snippets ( #1433 )
...
To add a Copy button wrap code snippet with the following element:
```
<div class="with-copy" markdown="1">
<your-code-snippet>
</div>
```
See the changes to `Kubernetes monitoring with VictoriaMetrics Single` for details.
2021-07-06 08:23:39 +03:00
Aliaksandr Valialkin
8f973e34fb
lib/workingsetcache: properly switch to whole mode
...
Previously the switch from `split` to `whole` mode had been performed too early,
e.g. when the current cache size became bigger than 1/4 of the allowed cache size.
Now it is performed when the current cache size becomes bigger than 1/2 of the allowed cache size.
This change can reduce memory usage for data ingestion path when big number of active time series are ingested.
2021-07-05 15:16:11 +03:00
Roman Khavronenko
bd6b8f7e31
move github-pages docs to the main repo ( #1432 )
...
* move github-pages docs to the main repo
* rm github actions for copying docs to VictoriaMetrics/VictoriaMetrics.github.io
2021-07-05 14:34:10 +03:00
Aliaksandr Valialkin
888d62e40c
docs/CHANGELOG.md: document the bugfix for vm_merge_need_free_disk_space metric at 9a83e9018d
2021-07-05 12:01:08 +03:00
Aliaksandr Valialkin
6bef227388
docs/Articles.md: add an url to https://medium.com/ibm-garage/monitoring-of-multiple-openshift-clusters-with-victoriametrics-d4f0979e2544
2021-07-05 11:51:37 +03:00
Aliaksandr Valialkin
f6bb130898
app/{vmselect,vmstorage}: clarify the description for -dedup.minScrapeInterval command-line flag
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1426
2021-07-02 15:05:57 +03:00
Aliaksandr Valialkin
1e52f11e87
docs/Cluster-VictoriaMetrics.md: typo fix: siplify -> simplify
2021-07-02 10:50:55 +03:00
Aliaksandr Valialkin
5beb099ff9
docs/Cluster-VictoriaMetrics.md: add a chapter describing a toy cluster setup on a single host
...
While at it, refer to available tools, which can simplify cluster setup
2021-07-02 10:48:56 +03:00
Aliaksandr Valialkin
158c50c0ee
lib/promauth: reload TLS certificates from disk on every mTLS connection as Prometheus does
...
This allows updating client certificates without the need to restart vmagent and/or single-node VictoriaMetrics.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1420
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/470
2021-07-01 15:27:47 +03:00
Aliaksandr Valialkin
02ed4b8b46
docs/CHANGELOG.md: document ae485c2bfd
2021-07-01 11:51:19 +03:00
Aliaksandr Valialkin
c25b839078
lib/workingsetcache: reset the cache mode when the cache is reset
...
This should reduce memory usage if the working set is reduced after the cache reset.
2021-07-01 11:50:11 +03:00
Aliaksandr Valialkin
1b0501a09e
lib/promscrape: typo fix in /targets output
...
The typo has been introduced in fb72a2133fhttps://github.com/VictoriaMetrics/VictoriaMetrics/issues/1408
2021-06-28 21:26:37 +03:00
Aliaksandr Valialkin
3af2162085
docs/vmagent.md: mention about docker_sd_config support
2021-06-25 20:52:15 +03:00
Aliaksandr Valialkin
008033a374
docs/CHANGELOG.md: cut v1.62.0
2021-06-25 13:29:38 +03:00
