Each group in vmalert starts with an artifical delay to avoid
thundering herd problem. For some groups with high evaluation
intervals, the delay could be significant.
If during this delay user will remove the group from the config
and hot-reload it - vmalert will have to wait until the delay
ends. This results into slow config reloading and UI hang.
The change moves the start-delay logic back to the group's
`start` method. Now, group can immediately exit from the
delay when `group.close()` method is called.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
app/vmctl: vm-native - split migration on per-metric basis
`vm-native` mode now splits the migration process on per-metric basis.
This allows to migrate metrics one-by-one according to the specified filter.
This change allows to retry export/import requests for a specific metric and provides a better
understanding of the migration progress.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
When group's update() or close() method is called, the group
still need to wait for its current evaluation to finish.
Sometimes, evaluation could take a significant amount of time
which slows configuration update or vmalert's graceful shutdown.
The change interrupts current evaluation in order to speed up
the graceful shutdown or config update procedures.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Use flag.Duration instead of flagutil.Duration for -snapshotCreateTimeout,
since the flagutil.Duration is intended mostly for big durations, e.g. days, months and years,
while the -snapshotCreateTimeout is usually smaller than one hour.
- Add links to https://docs.victoriametrics.com/#how-to-work-with-snapshots in docs/CHANGELOG.md,
so readers could easily find the corresponding docs when reading the changelog.
- Properly remove all the created directories on unsuccessful attempt to create
snapshot in Storage.CreateSnapshot().
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3551
* lib/{fs,mergeset,storage}: skip `.must-remove.` dirs when creating snapshot (#3858)
* lib/{mergeset,storage}: add timeout configuration for snapshots creation, remove incomplete snapshots from storage
* docs: fix formatting
* app/vmstorage: add metrics to track status of snapshots
* app/vmstorage: use `vm_http_requests_total` metric for snapshot endpoints metrics, rename new flag to make name more clear
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmstorage: update flag name in docs
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmstorage: reflect new metrics names change in docs
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Added `victoria-metrics-linux-s390x` to allow single node builds for `s390x` platform.
Leaving other packaging options at the moment, as on this platform, they're mostly going to be built from/with container images hosted within the company as a base, and not alpine.
* vmselect/promql: check for deadline in `count_values` fn
`count_values` could be very slow during the data processing.
Checking for deadline between iterations supposed to reduce
probability of exceeding `search.maxQueryDuration`.
The change also adds a new trace record, which captures the time
spent in aggregation function. Before that, the trace for aggr funcs
could be confusing since it doesn't account for all the places where
time was spent.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* metricsql: support optional 2nd argument for rollup functions
Support optional 2nd argument `min`, `max` or `avg` for rollup functions:
* rollup
* rollup_delta
* rollup_deriv
* rollup_increase
* rollup_rate
* rollup_scrape_interval
If second argument is passed, then rollup function will return only the selected aggregation type.
This change can be useful for situations where only one type of rollup calculation is needed.
For example, `rollup_rate(requests_total[5m], "max")`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* feat: improve mobile ui
* feat: improve mobile ui
* fix: change style server url
* fix: improve ExploreMetrics mobile
* fix: display global settings on all pages
- Do not generate __meta_server label, since it is unavailable in Prometheus.
- Add a link to https://docs.victoriametrics.com/sd_configs.html#kuma_sd_configs to docs/CHANGELOG.md,
so users could click it and read the docs without the need to search the corresponding docs.
- Remove kumaTarget struct, since it is easier generating labels for discovered targets
directly from the response returned by Kuma. This simplifies the code.
- Store the generated labels for discovered targets inside atomic.Value. This allows reading them
from concurrent goroutines without the need to use mutex.
- Use synchronouse requests to Kuma instead of long polling, since there is a little sense
in the long polling when the Kuma server may return 304 Not Modified response every -promscrape.kumaSDCheckInterval.
- Remove -promscrape.kuma.waitTime command-line flag, since it is no longer needed when long polling isn't used.
- Set default value for -promscrape.kumaSDCheckInterval to 30s in order to be consistent with Prometheus.
- Remove unnecessary indirections for string literals, which are used only once, in order to improve code readability.
- Remove unused fields from discoveryRequest and discoveryResponse.
- Update tests.
- Document why fetch_timeout and refresh_interval options are missing in kuma_sd_config.
- Add docs to discoveryutils.RequestCallback and discoveryutils.ResponseCallback,
since these are public types.
Side notes: it is weird that Prometheus implementation for kuma_sd_configs sets `instance` label,
since usually this label is set by the Prometheus itself to __address__ after the relabeling phase.
See https://www.robustperception.io/life-of-a-label/
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3389
See https://github.com/prometheus/prometheus/issues/7919
and https://github.com/prometheus/prometheus/pull/8844
as a reference implementation in Prometheus
`lib/protoparser/prometheus` is used by various applications,
such as `app/vmalert`. The recent change to the
`lib/protoparser/prometheus` package introduced a new dependency
of `lib/writeconcurrencylimiter` which exposes some metrics.
Because of the dependency, now all applications which have this
dependency also expose these metrics.
Creating a new `lib/protoparser/prometheus/stream` package helps
to remove these metrics from apps which use `lib/protoparser/prometheus`
as dependency.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3761
Signed-off-by: hagen1778 <roman@victoriametrics.com>
While at it, stop sending requests to unavailable backend for 3 seconds
before the next attempt. This should reduce the amounts of useless work
and the number of useless network packets when the backend is temporarily unavailable.
* app/vmauth: add concurent requests limit per auth record
* app/vmauth: added clarification comment
* app/vmauth: remove unused code
* app/vmauth: move read from limiter
* app/vmauth: fix text
* app/vmauth: fix comments
* - Clarify the docs for the max_concurrent_requests option at docs/vmauth.md
- Clarify the description of the change at docs/CHANGELOG.md
- Make sure that the -maxConcurrentRequests takes precedence over per-user max_concurrent_requests
- Update tests for verifying that the max_concurrent_requests option is parsed properly
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3346
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Document the change at docs/CHANGELOG.md
- Add `Reading rules from object storage` section to docs/vmalert.md
- Add `s3` prefix to command-line flags related to the configuration of s3 and gcs clients
- Explicitly mention that reading rules from object storage is supported only in enterprise version
* vmalert: support object storage for rules
Support loading of alerting and recording rules from object
storages `gcs://`, `gs://`, `s3://`.
* review fixes
* vmalert: use group's ID in UI to avoid collisions
Identical group names are allowed. So we should used IDs
for various groupings and aggregations in UI.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: prevent disabling state updates tracking
The minimum number of update states to track is now set to 1.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: properly update `debug` and `update_entries_limit` params on hot-reload
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: display `debug` field for rule in UI
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: exclude `updates` field from json marhsaling
This field isn't correctly marshaled right now.
And implementing the correct marshaling for it doesn't
seem right, since json representation is mostly used
by systems like Grafana. And Grafana doesn't expect this
field to be present.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* fix test for disabled state
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* fix test for disabled state
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: speed up state restore procedure on start
Alerts state restore procedure has been changed to become asynchronous.
It doesn't block groups start anymore which significantly improves vmalert's startup time.
Instead, state restore is called by each group in their goroutines after the first rules
evaluation.
While previously state restore attempt was made for all loaded alerting rules,
now it is called only for alerts which became active after the first evaluation.
This reduces the amount of API calls to the configured remote read URL.
This also means that `remoteRead.ignoreRestoreErrors` command-line flag becomes deprecated now
and will have no effect if configured.
See relevant issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2608
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* make lint happy
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Apply suggestions from code review
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This allows better controlling requests to backends and providing better error logging.
For example, if the backend was unavailable, then the ReverseProxy was logging the error
message without client ip and the initial request uri. This could harden debugging.
This is based on https://github.com/VictoriaMetrics/VictoriaMetrics/pull/3486
* feat: include fonts in the build
* fix: reduce size fonts
* wip
- Document the change at docs/CHANGELOG.md
- Run `make vmui-update`
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Call httpserver.GetQuotedRemoteAddr() and httpserver.GetRequestURI() only when the error occurs.
This saves CPU time on fast path when there are no parsing errors.
- Create a helper function - httpserver.LogError() - for logging the error with the request uri and remote addr context.
This prevents vmbackup from leaking passwords into logs like shown below.
2023-01-11T15:00:01.050Z info VictoriaMetrics/lib/logger/flag.go:12 build version: vmbackup-20221214-211706-tags-v1.85.1-0-g09a70d3e9
2023-01-11T15:00:01.050Z info VictoriaMetrics/lib/logger/flag.go:13 command-line flags
2023-01-11T15:00:01.050Z info VictoriaMetrics/lib/logger/flag.go:20 -dst="fs:///vm-backups/latest"
2023-01-11T15:00:01.050Z info VictoriaMetrics/lib/logger/flag.go:20 -snapshot.createURL="http://user:super_sercret123@victoriametricspshot/create"
2023-01-11T15:00:01.050Z info VictoriaMetrics/lib/logger/flag.go:20 -storageDataPath="/storage"
2023-01-11T15:00:01.050Z info VictoriaMetrics/app/vmbackup/main.go:53 Snapshot create url http://user:super_sercret123@victoriametrics:8428/snapshot/create
2023-01-11T15:00:01.050Z info VictoriaMetrics/app/vmbackup/main.go:60 Snapshot delete url http://user:super_sercret123@victoriametrics:8428/snapshot/delete
* feat: make the step input field global
* fix: correct get step from url
* fix: set minimumSignificantDigits to 1
* app/vmselect/vmui: `make vmui-update`
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
The per-series timestamps are usually shared among series, so it is unsafe modifying them.
The issue has been appeared after the optimization at 2f3ddd4884
* {lib/server, app/}: use `httpAuth.*` flag as fallback for `*AuthKey` if it is not set
* lib/ingestserver/opentsdbhttp: fix opentdb HTTP handler not respecting `httpAuth.*` flags
* Apply suggestions from code review
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* vmagent: add minimal scrape file exampe for vmagent quick start
Signed-off-by: Artem Navoiev <tenmozes@gmail.com>
* replace example with link to your prometheus.yml in docker
Signed-off-by: Artem Navoiev <tenmozes@gmail.com>
Signed-off-by: Artem Navoiev <tenmozes@gmail.com>
Previously the selected time series were split evenly among available CPU cores
for further processing - e.g unpacking the data and applying the given rollup
function to the unpacked data.
Some time series could be processed slower than others.
This could result in uneven work distribution among available CPU cores,
e.g. some CPU cores could complete their work sooner than others.
This could slow down query execution.
The new algorithm allows stealing time series to process from other CPU cores
when all the local work is done. This should reduce the maximum time
needed for query execution (aka tail latency).
The new algorithm should also scale better on systems with many CPU cores,
since every CPU processes locally assigned time series without inter-CPU communications.
The inter-CPU communications are used only when all the local work is finished
and the pending work from other CPUs needs to be stealed.
Unpack time series with less than 400K samples in the currently running goroutine.
Previously a new goroutine was being started for unpacking the samples.
This was requiring additional memory allocations.
Usually the number of blocks returned per each time series during queries is around 4.
So it is a good idea to pre-allocate 4 block references per time series
in order to reduce the number of memory allocations.
Previously the -maxConcurrentInserts was limiting the number of established client connections,
which write data to VictoriaMetrics. Some of these connections could be idle.
Such connections do not consume big amounts of CPU and RAM, so there is a little sense in limiting
the number of such connections. So now the -maxConcurrentInserts command-line option
limits the number of concurrently executed insert requests, not including idle connections.
It is recommended removing -maxConcurrentInserts command-line option, since the default value
for this option should work good for most cases.
Stress the importance of specifying of all Alertmanager
URLs in vmalert's `-notifier.url` or `notifier.config`
if it runs in cluster mode.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3547
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Show in the line tooltip the number of the query which generates the given line.
This simplifies comparison of lines generated by multiple queries.
- Show metric name as __name__ label in the line tooltip in the same way as other labels are shown there.
This makes the label information in the tooltip more consistent.
- Properly quote label values with JSON.stringify(). This prevents from improper formatting
when label values contain doublequote chars.
- Remove double curly braces artifact at graph legend for lines without names and labels.
- Properly use modifier for regular expressions across the code.
There is no need to manually call `queryDuration.UpdateDuration(startTime)`, because `defer queryDuration.UpdateDuration(startTime)` is executed at the beginning of the function(L660).
Allow configuring the default number of stored rule's update states in memory
via global `-rule.updateEntriesLimit` command-line flag or per-rule via rule's
`update_entries_limit` configuration param.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This simplifies manual usage of the APIs. For example, the following query
would return the results over the 2022 year.
/api/v1/query_range?start=2022&end=2023&step=1d&query=...
This is equivalent to:
/api/v1/query_range?start=2022-01-01T00:00:00Z&end=2023-01-01T00:00:00Z&step=1d&query=...
- Rename `Custom panel` tab to more clear `Query` tab
- Rename `Cardinality` tab to `Explore cardinality`, so it becomes consistent with `Explore metrics` tab
- Move `Dashboards` tab to the end, since it isn't used too much
- Document the feature at docs/CHANGELOG.md.
- Document the metrics explorer at https://docs.victoriametrics.com/#metrics-explorer .
- Properly set `start` and `end` args for the selected time range
when performing the request, which returns metric names.
- Improve queries, so they return lower number of lines and labels.
This should improve metrics' exploration.
- Properly encode label filters and query args before passing them to VictoriaMetrics.
- Various cosmetic fixes.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3386
