Previously, clicking on Ingestion row could result in a visual blip.
Re-ordering panels within the row seems to fix it.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Y-min set to 0 gives better understanding of changes, as it shows absolute change.
Otherwise, the panel will show relative change and could make a false impression
of the changes.
Other panels in dashboards are either instant (no historical data displayed),
or already set to Y-min: 0.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Reopening PR #7373 from a branch in VictoriaMetrics repo in order to
enable edits and rebase.
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Artem Fetishev <rtm@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 683f8c2780)
The new panel will show the 99th quantile of scrape duration in seconds.
This should help identifying vmagent instances that experiences too high scraping durations.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit d225a2eb56)
- Move the remaining code responsible for stream aggregation initialization from remotewrite.go to streamaggr.go .
This improves code maintainability a bit.
- Properly shut down streamaggr.Aggregators initialized inside remotewrite.CheckStreamAggrConfigs().
This prevents from potential resource leaks.
- Use separate functions for initializing and reloading of global stream aggregation and per-remoteWrite.url stream aggregation.
This makes the code easier to read and maintain. This also fixes INFO and ERROR logs emitted by these functions.
- Add an ability to specify `name` option in every stream aggregation config. This option is used as `name` label
in metrics exposed by stream aggregation at /metrics page. This simplifies investigation of the exposed metrics.
- Add `path` label additionally to `name`, `url` and `position` labels at metrics exposed by streaming aggregation.
This label should simplify investigation of the exposed metrics.
- Remove `match` and `group` labels from metrics exposed by streaming aggregation, since they have little practical applicability:
it is hard to use these labels in query filters and aggregation functions.
- Rename the metric `vm_streamaggr_flushed_samples_total` to less misleading `vm_streamaggr_output_samples_total` .
This metric shows the number of samples generated by the corresponding streaming aggregation rule.
This metric has been added in the commit 861852f262 .
See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6462
- Remove the metric `vm_streamaggr_stale_samples_total`, since it is unclear how it can be used in practice.
This metric has been added in the commit 861852f262 .
See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6462
- Remove Alias and aggrID fields from streamaggr.Options struct, since these fields aren't related to optional params,
which could modify the behaviour of the constructed streaming aggregator.
Convert the Alias field to regular argument passed to LoadFromFile() function, since this argument is mandatory.
- Pass Options arg to LoadFromFile() function by reference, since this structure is quite big.
This also allows passing nil instead of Options when default options are enough.
- Add `name`, `path`, `url` and `position` labels to `vm_streamaggr_dedup_state_size_bytes` and `vm_streamaggr_dedup_state_items_count` metrics,
so they have consistent set of labels comparing to the rest of streaming aggregation metrics.
- Convert aggregator.aggrStates field type from `map[string]aggrState` to `[]aggrOutput`, where `aggrOutput` contains the corresponding
`aggrState` plus all the related metrics (currently only `vm_streamaggr_output_samples_total` metric is exposed with the corresponding
`output` label per each configured output function). This simplifies and speeds up the code responsible for updating per-output
metrics. This is a follow-up for the commit 2eb1bc4f81 .
See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6604
- Added missing urls to docs ( https://docs.victoriametrics.com/stream-aggregation/ ) in error messages. These urls help users
figuring out why VictoriaMetrics or vmagent generates the corresponding error messages. The urls were removed for unknown reason
in the commit 2eb1bc4f81 .
- Fix incorrect update for `vm_streamaggr_output_samples_total` metric in flushCtx.appendSeriesWithExtraLabel() function.
While at it, reduce memory usage by limiting the maximum number of samples per flush to 10K.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5467
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6268
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit c1c2286e09)
### Describe Your Changes
- added stale metrics counters for input and output samples
- added labels for aggregator metrics =>
`name="{rwctx}:{aggrId}:{aggrSuffix}"`
- rwctx - global or number starting from 1
- aggrid - aggregator id starting from 1
- aggrSuffix - <interval>_(by|without)_label1_label2_labeln
e.g: `name="global:1:1m_without_instance_pod"`
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 861852f262)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This should improve precision of `restarts` and `version change` annotations when
zooming-in/zooming-out on the dashboards.
The change also makes `restarts` dashboard visible on the panels, so user can disable it from
displaying if needed. This could be useful when restarts overlap with version change events.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 9dd9b4442f)
The error appears when executing annotations query against Prometheus backend
because the query itself hasn't specified look-behind window (which is allowed
in VictoriaMetrics query engine).
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6309
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit c746ba154d)
* use docs.victoriametrics.com instead of github docs
* add links to common terms used in VictoriaMetrics
Signed-off-by: hagen1778 <roman@victoriametrics.com>
It should help identifying cases when too much CPU is spent on garbage collection,
and advice users on how this can be addressed.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmagent: export `vm_promscrape_scrape_pool_targets` metric to track the number of targets that each scrape_job discovers
* add extra panel for new metric
The `path!="/favicon.ico"` filter has little sense, since there are many other special paths,
which may be filtered out - /metrics, /flags, /health, /ping, /robots.txt, /-/healthy, /-/ready, /reload, etc.
See /lib/httpserver/httpserver.go for more details.
It will be hard or impossible to maintain filters for all these paths, so it is better to drop this filter
in order to simplify queries and improve the consistency of these queries.
* lib/promscrape: make concurrency control optional
Before, `-maxConcurrentInserts` was limiting all calls to `promscrape.Parse`
function: during ingestion and scraping. This behavior is incorrect.
Cmd-line flag `-maxConcurrentInserts` should have effect onl on ingestion.
Since both pipelines use the same `promscrape.Parse` function, we extend it
to make concurrency limiter optional. So caller can decide whether concurrency
should be limited or not.
This commit makes c53b5788b4
obsolete.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Revert "dashboards: move `Concurrent inserts` panel to Troubleshooting section"
This reverts commit c53b5788b4.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/promscrape: add metric `vm_promscrape_scrapes_skipped_total`
add metric `vm_promscrape_scrapes_skipped_total`to show whether vmagent skips the scrapes.
This could happen if vmagent is overloaded or target is responding too slow for configured `scrape_interval`.
The follow-up commit should add a corresponding alerting rule and panel to vmagent dashboard.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* deployment/docker: add `TooManyScrapeSkips` alerting rule for vmagent
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: add panels `Scrape duration 0.99 quantile` and `Skipped scrapes` to vmagent dashboard
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Moved because this panel is related to both: scraped and ingested data.
Before, it could have give a misleading impression that it is related to ingested metrics only.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Fix display of ingested rows rate for `Samples ingested/s`
and `Samples rate` panels for vmagent's dasbhoard.
Previously, not all ingested protocols were accounted in these panels.
An extra panel `Rows rate` was added to `Ingestion` section to display the split
for rows ingested rate by protocol.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 481a2c70fd)
The new panel supposed to show whether the number of concurrent
inserts processed by vmagent isn't reaching the limit.
The panel contains recommendation what to do if limit is reached.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/cluser: use `quantile` since `median` isn't supported by PromQL
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/*: add `restarts` annotation to show when there were restarts
The cluster's annotation query is aggregated `by job`,
while vmagent/vmalert are aggregated `by job, instance`.
This is because cluster dashboard can contains too many instances
and annotation could become too noisy.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/*: support instance filter in Version annotation
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The change list is the following:
* bump Grafana version to 9.2.6;
* add version change annotations;
* switch to per-job panels instead of per-instance;
* add drilldown option for resource usage panels.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/cluster: few updates
* apply consistent formatting across panels;
* make resource usage panels per component more detailed;
* add extra panels to vmselect for displaying
`vm_rows_read_per_query`, `vm_rows_scanned_per_query`,
`vm_rows_read_per_series` and `vm_series_read_per_query` metrics.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/single: few updates
* apply consistent formatting across panels;
* add extra panels to Performance for displaying
`vm_rows_read_per_query`, `vm_rows_scanned_per_query`,
`vm_rows_read_per_series` and `vm_series_read_per_query` metrics.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmagent: few updates
* apply consistent formatting across panels;
* add panels for showing number of samples ingested
or scraped;
* adapt resource usage panels for multiple selected jobs/instances;
* add adhoc variable;
* display vmagent's version in Stats.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmalert: few updates
* apply consistent formatting across panels;
* adapt resource usage panels for multiple selected jobs/instances;
* show vmalert version in Stats section.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The new metric `vmagent_remotewrite_queues` exports a static value of
number of configured remote write queus. This metric is useful to
calculate total saturation per each configured URL with given number
of queues. See corresponding changes to vmagent alerts and dashboard.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Before we used fixed `5m` interval for expressions with `rate` func.
Unfortunately, this interval wasn't a fit for all the cases. So we
switch to `$__rate_interval` instead.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: add `CPU percentage` panel for cluster dashboards
The new panel `CPU percentage` was added instead if adding a limit
to the existing `CPU` panel because dasbhoard may display big number
of components each with own limits. The separate panel should provide
a clear display of CPU load.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: sync vmagent and vmalert changes from single version
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docker: remove unsupported param from vmagent config
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* alerts: add `TooHighCPUUsage` alert for all VM components
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmagent: shuffle panels for better visibility
More important error/dropped panels were moved higher on the main row.
Network usage panel moved to Resource usage row.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmagent: add Troubleshooting row to show top 5 instances/jobs by churn rate
New panels are supposed to show top 5 jobs or targets which generate the most
of the churn rate. They were placed into a new row "Troubleshooting".
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmagent: add panels for showing persistent queue saturation
New panels were added to Torubleshooting row to show the persistent queue
saturation. The corresponding alerts were added and linked to these
panels as well.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards/vmagent: add alert "RejectedRemoteWriteDataBlocksAreDropped"
New alert suppose to send a notification when vmagent starts to drop
data blocks rejected by configured remote write destiantion.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dasbhoard: replace `null` datasources
null datasource value may confuse Grafana and make it drop panel query in some
versions.
* docker: bump grafana image version
* dashboards: add URL variable selector to vmagent dashboard
* dashboards: add new panel `Remote write connection saturation` to vmagent dashboard
* alerts: add new alert for `Remote write connection saturation` panel of vmagent dashboard
* dashboards: add "Logging rate" panel to vmagent dashboard
* dashboard: update vmagent dash
The update contains the following changes:
* display anonymous memory usage metric. This metric suppose to reflect
memory usage of the process which can't be freed by OS;
* add legends to all panels. This is important for cases when users share
the screenshots;
* modify panels for Grafana v8.0.0
* dashboard: update cluster dash
The update contains the following changes:
* move stats panels to Configuration row, so it can be collapsed;
* display anonymous memory usage metric. This metric suppose to reflect
memory usage of the process which can't be freed by OS;
* add legends to all panels. This is important for cases when users share
the screenshots;
* modify panels for Grafana v8.0.0
* dashboard: update single node dashboard
* add number of new series created over last 24h;
* bump version requirements.
* dashboard: update vmagent dashboard
* add panel for open file descriptors;
* add panel for disk I/O;
* add panel for `vmagent_remotewrite_packets_dropped_total` metric;
* bump version requirements.
* dashboard: rename var `datasource` to `ds` for consistency reason
Dasbhoards for cluster version or vmagent operate with datasource variable
named `ds`. For consistency sake we rename this variable in single node version
as well.
* dashboard: add instance variable picker
See dashboard reviews here https://grafana.com/grafana/dashboards/10229/reviews
* dashboard: limit number of buckets in histogram to 12 for vmagent dashboard
* dashboard: bump version requirement in description for single version
* dashboard: drop extra series override for single version
* dashboard: set Y-min to zero for most of panels in vmagent dashboard
