* Mention about the ability to configure vmalert notifiers via files in docs/CHANGELOG.md
* Mention about the ability to use Consul service discovery for vmalert notifiers in docs/CHANGELOG.md
* Run `make docs-sync` in order to sync app/vmalert/README.md to docs/vmalert.md
vmalert: support configuration file for notifiers
* vmalert notifiers now can be configured via file
see https://docs.victoriametrics.com/vmalert.html#notifier-configuration-file
* add support of Consul service discovery for notifiers config
see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1947
* add UI section for currently loaded/discovered notifiers
* deprecate `-rule.configCheckInterval` in favour of `-configCheckInterval`
* add ability to suppress logs for duplicated targets for notifiers discovery
* change behaviour of `vmalert_alerts_send_errors_total` - it now accounts
for failed alerts, not HTTP calls.
* vmalert: check if remoteWrite is configured for replay mode
The purpose of `replay` mode is to backfill results of recording
or alerting rules. So `remoteWrite.url` should be required.
Otherwise, process can fail on attempt to send data.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Update app/vmalert/main.go
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
When using `vmalert` with older Prometheus versions, the passed
`step=2m` may be parsed by Prometheus with an err: "cannot parse \"2m0s\" to a valid duration".
In order to improve compatibility vmalert will always convert step duration to seconds.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1943
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Service labels like `alertname` or `alertgroup` were attached
after template expanding for `labels` section. Because of this,
labels `alertname` or `alertgroup` weren't available for templating
in `labels` section of alert's definition.
This commit changes the order of labels attaching and adds a test
for verifying these labels availability.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1921
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: introduce additional HTTP URL params per-group configuration
The new group field `params` allows to configure custom HTTP URL params
per each group. These params will be applied to every request before
executing rule's expression. Hot config reload is also supported.
Field `extra_filter_labels` was deprecated in favour of `params` field.
vmalert will print deprecation log message if config file contains
the deprecated field.
`params` fields are supported by both Prometheus and Graphite datasource types.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: provide more examples for `params` field
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: set higher priority for `params` setting
If there would be a conflict between URL params set in `datasource.url` flag
and params in group definition the latter will have higher priority.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The bump was required for `vmalert` package.
`vmalert` docs now also contain an updated description.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Previously, vmalert would print an err message and set vmalert_config_last_reload_successful=0
only once during a hot reload of a bad config. Such behaviour may result into non noticed
event of a bad config reload attempt
Now, it continues to print error messages and keep vmalert_config_last_reload_successful state
until successful attempt will be made or config state will be rolled back to prev state.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
For a long time notifier.Addr flag was required. The assumption was that vmalert will
be always used for alerting. However, practice shows that some users need only
recording rules. In this case, requirement of notifier.Addr is ambigious.
The change verifies if loaded config contains recording or alerting rules and
if there are corresponding flags set. This is true for initial config load
and hot reload.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This removes the unneeded level of indirection and improves code readability.
The "prometheus" and "graphite" constants aren't going to change in the future, so there is no sense in hiding them behind constants.
Previously only the lower part of 64-bit hash was used for calculating the offset.
This may give uneven distribution in some cases. So let's use all the available 64 bits from the hash
for calculating the offset.
Prometheus allows to have groups with no rules, so we should support
it in vmalert as well for compatibility reasons.
It is also allowed to hot-reload empty groups by adding or removing rules.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Previously, ID for alert entity was generated without alertname or groupname.
This led to collision, when multiple alerting rules within the same group
producing same labelsets. E.g. expr: `sum(metric1) by (job) > 0` and
expr: `sum(metric2) by (job) > 0` could result into same labelset `job: "job"`.
The issue affects only UI and Web API parts of vmalert, because alert ID is used
only for displaying and finding active alerts. It does not affect state restore
procedure, since this label was added right before pushing to remote storage.
The change now adds all extra labels right after receiving response from the datasource.
And removes adding extra labels before pushing to remote storage.
Additionally, change introduces a new flag `Restored` which will be displayed in UI
for alerts which have been restored from remote storage on restart.
Commit fixes potential race condition when group update
and generating of ID() happens simultaneously.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Regression was introduced during code refactoring. It potentially
could lead to situation when SIGHUP signals were ignored while
vmalert was still busy with initing group manager.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The extra `/` may cause issues when additional path prefixes
are configured. Also, removing it makes it consistent
with the rest of declarations.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: adjust `http.Transport.MaxIdleConns` value accordingly to `http.Transport.MaxIdleConnsPerHost`
`http.Transport.MaxIdleConnsPerHost` setting is controlled by `datasource.maxIdleConnections` flag,
while `http.Transport.MaxIdleConns` is inherited from DefaultTransport and is equal to `100`.
The fix adjusts `http.Transport.MaxIdleConns` value if it is lower than `http.Transport.MaxIdleConnsPerHost`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmauth: adjust `http.Transport.MaxIdleConns` value accordingly to `http.Transport.MaxIdleConnsPerHost`
`http.Transport.MaxIdleConnsPerHost` setting is controlled by `maxIdleConnsPerBackend` flag,
while `http.Transport.MaxIdleConns` is inherited from DefaultTransport and is equal to `100`.
The fix adjusts `http.Transport.MaxIdleConns` value if it is lower than `http.Transport.MaxIdleConnsPerHost`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The source link is controlled by `external.url` and `external.alert.source`
flags, in the same way as for alertmanager notifications.
The source link is added to Alerts list view, and specific Alert view.
`omitempty` tag resulted into skipping this param on marshaling,
which was used as a checksum for groups configuration. Since on
config reload checksums are compared before applying changes,
any change to `interval` only didn't trigger config reload.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1641
Signed-off-by: hagen1778 <roman@victoriametrics.com>
