Roman Khavronenko
5839112cda
vmselect/rollup: rm workaround for slow-changing counters ( #3163 )
...
The workaround was introduced to fix https://github.com/VictoriaMetrics/VictoriaMetrics/issues/962 .
However, it didn't prove itself useful. Instead, it is recommended using `increase_pure` function.
Removing the workaround makes VM to produce accurate results when calculating
`delta` or `increase` functions over slow-changing counters with vary intervals
between data points.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-10-06 15:45:31 +03:00
Aliaksandr Valialkin
dca89c7d2f
app/vmselect/promql: consistently calculate rate_over_sum(m[d]) as sum_over_time(m[d])/d
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3045
2022-10-06 15:44:12 +03:00
Aliaksandr Valialkin
cd422a5435
app/vmselect/promql: typo fix after 992f36702f
2022-08-30 12:04:06 +03:00
Aliaksandr Valialkin
992f36702f
app/vmselect/promql: follow-up after 2d71b4859c
...
- Use getScalar() function for obtaining the expected scalar from phi arg
- Reduce the error message returned to the user when incorrect phi is passed to histogram_quantiles
- Improve the description of this bugfix in the docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3026
2022-08-30 11:16:29 +03:00
Dmytro Kozlov
86d85591a4
vmselect/promql: fix panic in histogram_quantiles function ( #3029 )
...
* vmselect/promql: fix panic in histogram_quantiles function
* Update docs/MetricsQL.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
2022-08-30 11:16:13 +03:00
Aliaksandr Valialkin
d3b38ddb2e
app/vmselect/promql/transform.go: reuse evalNumber() function for constructing timezone_offset() results
2022-08-08 16:39:27 +03:00
Aliaksandr Valialkin
2426695571
app/vmselect/promql: properly return q1 series from q1 ifnot q2 when q2 returns nothing
2022-08-08 15:44:42 +03:00
Aliaksandr Valialkin
29e53b9f55
app/vmselect/promql: consistency update after 93fbd0c54b
2022-07-13 12:33:14 +03:00
Roman Khavronenko
93fbd0c54b
promql: return step as scrapeInterval when it can't be calculated ( #2865 )
...
The change allows to specify default value for `getScrapeInterval`
function when actual interval can't be calculated.
Before the change, function were returning `maxSilenceInterval` (5m)
in such cases, which may be not correct for instant queries processing.
The specific scenario where using `maxSilenceInterval` caused issues
is the following:
1. Series becomes stale;
2. Client (in this case vmalert) continues to request series every 15s;
3. Database returns empty results as expected;
4. But at some specific moment of time database returns datapoints from `now()-5m`,
because lookback window was extended to `maxSilenceInterval`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-07-13 12:27:38 +03:00
Aliaksandr Valialkin
c2197ad139
app/vmselect/promql: validate function name before evaluating its arguments
...
This avoids unneeded evaluation of args for unknown functions
2022-07-12 19:48:26 +03:00
Roman Khavronenko
e1a41cfab5
metricsql: properly evaluate timezone_offset over time interval ( #2842 )
...
* metricsql: properly evaluate `timezone_offset` over time interval
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2771
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Update docs/CHANGELOG.md
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2022-07-08 14:03:56 +03:00
Aliaksandr Valialkin
ae80cf76e0
app/vmselect: make fmt after f3ece83e67
2022-07-05 14:35:24 +03:00
Aliaksandr Valialkin
f3ece83e67
app/vmselect/promql: properly calculate histogram_quantile over unexpected le buckets
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2819
2022-07-05 13:19:24 +03:00
Aliaksandr Valialkin
84e373e5c7
app/vmselect/promql: properly handle partial counter resets in rate(), irate(), increase() and remove_resets() functions
2022-06-30 22:39:38 +03:00
Aliaksandr Valialkin
3e2dd85f7d
all: readability improvements for query traces
...
- show dates in human-readable format, e.g. 2022-05-07, instead of a numeric value
- limit the maximum length of queries and filters shown in trace messages
2022-06-30 18:20:33 +03:00
Aliaksandr Valialkin
a14188dd8e
app/vmselect: expose additional histograms at /metrics page, which may help get more insights for the query workload
...
This commit is based on https://github.com/VictoriaMetrics/VictoriaMetrics/pull/2792
2022-06-28 20:18:13 +03:00
Aliaksandr Valialkin
a43f2d0bc5
app/vmselect/promql: show the number of scanned samples in the query trace
2022-06-28 19:26:17 +03:00
Aliaksandr Valialkin
e578549b8a
app/vmselect: optimize /api/v1/series a bit for time ranges smaller than one day
2022-06-28 13:02:47 +03:00
Aliaksandr Valialkin
a963b2a0aa
all: show timeRange in traces in human-readable format instead of timestamps in milliseconds
2022-06-27 13:45:51 +03:00
Aliaksandr Valialkin
e6ed92529b
all: remove explicit "xxhash" name when importing github.com/cespare/xxhash/v2 package
...
This package already has the same name, so there is no need in explicit name
2022-06-21 20:23:32 +03:00
Aliaksandr Valialkin
12ac255dae
lib/querytracer: make it easier to use by passing trace context message to New and NewChild
...
The context message can be extended by calling Donef.
If there is no need to extend the message, then just call Done.
2022-06-08 21:06:52 +03:00
Aliaksandr Valialkin
41958ed5dd
all: add initial support for query tracing
...
See https://docs.victoriametrics.com/Single-server-VictoriaMetrics.html#query-tracing
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1403
2022-06-01 02:29:23 +03:00
Aliaksandr Valialkin
a7f18f8cb2
app/vmselect/promql: do not return values from label_value() if the original time series has no values at the selected timestamps
2022-05-09 17:57:39 +03:00
Aliaksandr Valialkin
cce1b6d7f9
app/vmselect/promql: add tlast_change_over_time(m[d]) function, which returns the timestamp for the last change of m on the given lookbehind window d
2022-04-27 10:59:03 +03:00
Aliaksandr Valialkin
25fe83577d
app/vmselect/promql: properly handle scalar default vector, scalar if vector and scalar ifnot vector queries
...
Previously `vector` time series could be unexpectedly returned from such queries
2022-04-21 15:34:36 +03:00
Aliaksandr Valialkin
d1a9fac894
app/vmselect/promql: fix comparison to nan
...
The comparison to nan has been broken in d335cc886chttps://github.com/VictoriaMetrics/VictoriaMetrics/issues/150
2022-04-21 14:55:37 +03:00
Aliaksandr Valialkin
de892239a9
app/vmselect/promql: add drop_common_labels() function
2022-04-21 14:20:20 +03:00
Aliaksandr Valialkin
7a44ba1234
app/vmselect/promql: fix q default b where b may have empty time series
2022-04-21 11:42:42 +03:00
Aliaksandr Valialkin
d335cc886c
app/vmselect/promql: fix duplicate time series error on joins against time series filtered by values
...
This should prevent from `duplicate time series` errors when executing the following query:
kube_pod_container_resource_requests{resource="cpu"} * on (namespace,pod) group_left() (kube_pod_status_phase{phase=~"Pending|Running"}==1)
where `kube_pod_status_phase{phase=~"Pending|Running"}==1` filters out diplicate time series
2022-04-20 22:18:44 +03:00
Aliaksandr Valialkin
ed97908ca9
app/vmselect/promql: rename removeNaNs() to more clear removeEmptySeries()
2022-04-20 19:53:46 +03:00
Aliaksandr Valialkin
61c7f6beae
app/vmselect/promql: allow calling InitRollupResultCache+StopRollupResultCache multiple times during tests
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2406
2022-04-11 12:34:43 +03:00
Aliaksandr Valialkin
6e364e19ef
app/vmselect: add fine-grained limits for the number of returned/scanned time series for various APIs
2022-03-26 11:29:49 +02:00
Aliaksandr Valialkin
0d47c23a03
app/vmselect/promql: reduce the maximum number of label values, which can be propagated from one side of the binary operation to another side of the binary operation from 10K to 1K
...
There are user reports that 10K unique values in a single label filter may lead to performance and memory usage issues
2022-02-24 04:05:18 +02:00
Aliaksandr Valialkin
62b46007c5
lib/workingsetcache: reduce the default cache rotation period from hour to 20 minutes
...
This should reduce memory usage under high time series churn rate
2022-02-23 13:41:45 +02:00
Aliaksandr Valialkin
b1f94f7f0e
app/vmselect/promql: return at most one time series from absent_over_time() in the same way as Prometheus does
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2130
2022-02-12 15:45:09 +02:00
Aliaksandr Valialkin
96b7de6736
app/vmselect/promql: clarify comments on why the right side of if and and operators are executed at first
2022-02-03 00:26:14 +02:00
Aliaksandr Valialkin
4b850c2a59
app/vmselect/promql: do not push down filters, which enumerate more than 10k unique values
...
Such filters may slow down time series search, so just skip them.
This is a follow-up for e7f1ceeb84https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1827
2022-02-02 23:40:02 +02:00
Aliaksandr Valialkin
2016a2c899
app/vmselect/promql: properly handle foo or bar queries
...
Such queries may miss `bar` results after the commit e7f1ceeb84
2022-02-01 17:40:51 +02:00
Aliaksandr Valialkin
4bdd10ab90
lib/bytesutil: split Resize* funcs to MayOverallocate and NoOverallocate for more fine-grained control over memory allocations
...
Follow-up for f4989edd96https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2007
2022-02-01 00:18:42 +02:00
Aliaksandr Valialkin
a8d22e1223
app/vmselect/promql: check for binary operation in case-insensitive manner when deciding which side of the operation to perform the first
...
PromQL and MetricsQL operators are case-insensitive
2022-01-31 22:06:15 +02:00
Aliaksandr Valialkin
e7f1ceeb84
app/vmselect/promql: optimize queries, which join on _info metrics.
...
Automatically add common filters from one side of binary operation
to the other side before sending the query to storage subsystem.
See https://grafana.com/blog/2021/08/04/how-to-use-promql-joins-for-more-effective-queries-of-prometheus-metrics-at-scale/
and https://www.robustperception.io/exposing-the-software-version-to-prometheus
2022-01-31 19:32:36 +02:00
Aliaksandr Valialkin
f4989edd96
lib/bytesutil: split Resize() into ResizeNoCopy() and ResizeWithCopy() functions
...
Previously bytesutil.Resize() was copying the original byte slice contents to a newly allocated slice.
This wasted CPU cycles and memory bandwidth in some places, where the original slice contents wasn't needed
after slize resizing. Switch such places to bytesutil.ResizeNoCopy().
Rename the original bytesutil.Resize() function to bytesutil.ResizeWithCopy() for the sake of improved readability.
Additionally, allocate new slice with `make()` instead of `append()`. This guarantees that the capacity of the allocated slice
exactly matches the requested size. The `append()` could return a slice with bigger capacity as an optimization for further `append()` calls.
This could result in excess memory usage when the returned byte slice was cached (for instance, in lib/blockcache).
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2007
2022-01-25 15:24:44 +02:00
Aliaksandr Valialkin
dc7b63a793
app/vmselect/promql: properly keep metric names when optimized path is used for aggregate function calculations
...
For example, `sum(rate(...) keep_metric_names) by (__name__)` didn't leave the original metric name because of this issue.
This is a follup-up for 1bdc71d917https://github.com/VictoriaMetrics/VictoriaMetrics/issues/949
2022-01-17 15:30:30 +02:00
Aliaksandr Valialkin
1bdc71d917
app/vmselect/promql: implement keep_metric_names modifier for transform and rollup functions
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/949
2022-01-14 04:14:59 +02:00
Aliaksandr Valialkin
f41846d002
app/vmselect/promql: add stale_samples_over_time() function
2022-01-14 01:48:04 +02:00
Aliaksandr Valialkin
c883c15878
app/vmselect/promql: add support for @ modifier
...
Add support for `@` modifier in MetricsQL according to https://prometheus.io/docs/prometheus/latest/querying/basics/#modifier
Extend the support with the following features:
* Allow using `@` modifier everywhere in the query. For example, `sum(foo) @ end()`
* Allow using arbitrary expression as `@` modifier. For example, `foo @ (end() - 1h)`
returns `foo` value at `end - 1 hour` timestamp on the selected time range `[start ... end]`
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1348
2022-01-13 22:12:06 +02:00
Aliaksandr Valialkin
9469696e46
app/vmselect/promql: fix limit_offset() test
...
The test has been broken in addae7fc6a
2022-01-13 16:59:28 +02:00
Aliaksandr Valialkin
974d9c0eee
app/vmselect/promql: follow-up after 177e345d8a
...
* Document changes_prometheus(), increase_prometheus() and delta_prometheus() functions.
* Simplify their implementation
* Mention these functions in docs/CHANGELOG.md
2021-12-20 13:19:44 +02:00
匠心零度
177e345d8a
add Prometheus semantics function :changes_prometheus、delta_prometheus、increase_prometheus ( #1972 )
...
Co-authored-by: lirenzuo <lirenzuo@shein.com>
2021-12-20 12:32:43 +02:00
Aliaksandr Valialkin
5efe377a26
app/vmselect/promql: add timestamp_with_name(m[d]) function
...
This function works the same as `timestamp()`, but doesn't remove source time series names.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/949#issuecomment-995222388
2021-12-15 23:37:07 +02:00
