Dmytro Kozlov
f425123116
app/vmagent,lib/persistentqueue: show warning message if --remoteWrite.maxDiskUsagePerURL
flag lower than 500MB ( #4196 )
...
* app/vmagent,lib/persistentqueue: show warning message if `--remoteWrite.maxDiskUsagePerURL` flag lower than 500MB
* app/vmagent,lib/persistentqueue: linter fix
* app/vmagent,lib/persistentqueue: fix comment
2023-05-08 15:45:21 -07:00
Aliaksandr Valialkin
cf4701db65
lib/fs: add MustReadDir() function
...
Use fs.MustReadDir() instead of os.ReadDir() across the code in order to reduce the code verbosity.
The fs.MustReadDir() logs the error with the directory name and the call stack on error
before exit. This information should be enough for debugging the cause of the error.
2023-04-14 22:11:40 -07:00
Aliaksandr Valialkin
dad13c0a91
lib/streamaggr: follow-up for ff72ca14b9
...
- Make sure that the last successfully loaded config is used on hot-reload failure
- Properly cleanup resources occupied by already initialized aggregators
when the current aggregator fails to be initialized
- Expose distinct vmagent_streamaggr_config_reload* metrics per each -remoteWrite.streamAggr.config
This should simplify monitoring and debugging failed reloads
- Remove race condition at app/vminsert/common.MustStopStreamAggr when calling sa.MustStop() while sa
could be in use at realoadSaConfig()
- Remove lib/streamaggr.aggregator.hasState global variable, since it may negatively impact scalability
on system with big number of CPU cores at hasState.Store(true) call inside aggregator.Push().
- Remove fine-grained aggregator reload - reload all the aggregators on config change instead.
This simplifies the code a bit. The fine-grained aggregator reload may be returned back
if there will be demand from real users for it.
- Check -relabelConfig and -streamAggr.config files when single-node VictoriaMetrics runs with -dryRun flag
- Return back accidentally removed changelog for v1.87.4 at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3639
2023-03-31 22:54:10 -07:00
Alexander Marshalov
8c14d17694
added hot reload support for stream aggregation configs ( #3969 ) ( #3970 )
...
added hot reload support for stream aggregation configs (#3969 )
Signed-off-by: Alexander Marshalov <_@marshalov.org>
2023-03-31 22:31:38 -07:00
Aliaksandr Valialkin
6f5bbf096a
app/vmagent/remotewrite: cosmetic updates after f3a51e8b1d
...
- Compare directory names instead of paths to directory when determining which persistent queues must be deleted
This is less error-prone solution, since paths to the same directory can differ, which could lead
to accidental directory removal for the existing -remoteWrite.url
- Log the `removed %d dangling queues` message when at least a single queue has been removed
- Consistently use filepath.Join() for creating paths to persistent queues.
This is needed for Windows support (see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70 )
- Clarify the description of the change at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4014
2023-03-27 18:38:53 -07:00
Zakhar Bessarab
6ed6eb0c4c
app/vmagent: add -remoteWrite.removeDanglingQueues
flag ( #4017 )
...
* app/vmagent: add `-remoteWrite.removeDanglingQueues` flag which allows to automatically remove dangling persistent queue contents
Related issue: #4014
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmagent: address review feedback
- remove persistent queues files by default
- rename `remoteWrite.removeDanglingQueues` to `remoteWrite.keepDanglingQueues`
- update docs to reflect changed behaviour
Related issue: #4014
* Apply suggestions from code review
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2023-03-27 18:38:51 -07:00
Aliaksandr Valialkin
b60594a548
app/vmagent/remotewrite: follow-up for e3a756d82869f8c357b072f6e635ebfc7d65dd2c
...
- Document the fix
- Move the detection of VictoriaMetrics remoteWrite protocol from client.init() to newHTTPClient()
This simplifies the fix to the following diff:
diff --git a/app/vmagent/remotewrite/client.go b/app/vmagent/remotewrite/client.go
index 099899c19..70b904af4 100644
--- a/app/vmagent/remotewrite/client.go
+++ b/app/vmagent/remotewrite/client.go
@@ -151,10 +151,6 @@ func newHTTPClient(argIdx int, remoteWriteURL, sanitizedURL string, fq *persiste
}
c.sendBlock = c.sendBlockHTTP
- return c
-}
-
-func (c *client) init(argIdx, concurrency int, sanitizedURL string) {
useVMProto := forceVMProto.GetOptionalArg(argIdx)
usePromProto := forcePromProto.GetOptionalArg(argIdx)
if useVMProto && usePromProto {
@@ -173,6 +169,10 @@ func (c *client) init(argIdx, concurrency int, sanitizedURL string) {
}
c.useVMProto = useVMProto
+ return c
+}
+
+func (c *client) init(argIdx, concurrency int, sanitizedURL string) {
2023-03-08 01:35:31 -08:00
Dmytro Kozlov
2cf6797a24
app/vmagent: fix panic if auth config not defined ( #530 )
2023-03-08 01:35:04 -08:00
Aliaksandr Valialkin
d9581cf3f3
app/vmagent: add -remoteWrite.vmProtoCompressLevel command-line flag for tuning the compression level for VictoriaMetrics remote write protocol
2023-02-27 11:04:11 -08:00
Aliaksandr Valialkin
1e156ac3c3
app/vmagent: use the provided auth options when checking whether the remote storage supports VictoriaMetrics remote write protocol
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3847
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1225
2023-02-26 12:19:53 -08:00
Aliaksandr Valialkin
f579cac297
app/vmagent: automatically detect whether the remote storage supports VictoriaMetrics remote write protocol
...
Substitute -remoteWrite.useVMProto with -remoteWrite.forcePromProto command-line flag,
which can be used for forcing Prometheus remote write protocol in cases when the remote storage
supports VictoriaMetrics remote write protocol.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3847
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1225
2023-02-23 17:38:47 -08:00
my-git9
7d86c5c94a
chore: Use http constants to replace numbers ( #3846 )
...
Signed-off-by: xin.li <xin.li@daocloud.io>
2023-02-22 18:59:32 -08:00
Aliaksandr Valialkin
b3aed1aebc
app/vmagent/remotewrite: removed unneeded code in testPushWriteRequest after 57801660ab
2023-02-22 17:50:03 -08:00
Alexander Marshalov
29fa78a310
Fix TestPushWriteRequest for remotewriteprotocol for pure-test (with native zstd) ( #3850 )
...
app/vmagent: fix TestPushWriteRequest for pure-test (with native zstd)
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
2023-02-22 12:16:29 -08:00
Aliaksandr Valialkin
80c6d1e24c
app/vmagent: add support for VictoriaMetrics remote write protocol, which allows saving up to 10x on network bandwidth costs under high load
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1225
2023-02-20 18:40:40 -08:00
Aliaksandr Valialkin
5defa99a2e
lib/streamaggr: add ability to de-duplicate input samples before aggregation
2023-01-25 09:22:03 -08:00
Aliaksandr Valialkin
ac890b3081
docs: update -help
outputs for vm* tools
2023-01-03 23:27:31 -08:00
Aliaksandr Valialkin
3369371636
app/{vmagent,vminsert}: add support for streaming aggregation
...
See https://docs.victoriametrics.com/stream-aggregation.html
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3460
2023-01-03 22:22:07 -08:00
Aliaksandr Valialkin
cfba42091e
app/vmagent/remotewrite: improve descriptions for -remoteWrite.relabelConfig
and -remoteWrite.urlRelabelConfig
...
- Cross-reference these command-line flags.
- Add a link to https://docs.victoriametrics.com/vmagent.html#relabeling
2023-01-03 22:05:39 -08:00
Roman Khavronenko
998d89685f
vmagent: respect -usePromCompatibleNaming
if no relabeling is set ( #3511 )
...
* vmagent: respect `-usePromCompatibleNaming` if no relabeling is set
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3493
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmagent: upd test
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2022-12-20 14:34:29 -08:00
Aliaksandr Valialkin
1a88fe5b1f
lib/flagutil/bytes.go: properly handle values bigger than 2GiB on 32-bit architectures
...
This fixes handling of values bigger than 2GiB for the following command-line flags:
- -storage.minFreeDiskSpaceBytes
- -remoteWrite.maxDiskUsagePerURL
2022-12-14 19:29:57 -08:00
Aliaksandr Valialkin
97b41e727c
lib/promscrape: implement target-level and metric-level relabel debugging
...
Target-level debugging is performed by clicking the 'debug' link at the corresponding target
on either http://vmagent:8429/targets page or on http://vmagent:8428/service-discovery page.
Metric-level debugging is perfromed at http://vmagent:8429/metric-relabel-debug page.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3407
See https://docs.victoriametrics.com/vmagent.html#relabel-debug
2022-12-10 02:25:56 -08:00
Aliaksandr Valialkin
6910b1de2e
all: typo fix: the the
-> the
2022-12-03 21:53:07 -08:00
Aliaksandr Valialkin
afc35485c1
app/vminsert: add missing vm_relabel_config_* metrics after 03d88bc066
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3345
2022-11-22 00:48:13 +02:00
Roman Khavronenko
d1169c1559
vmagent: expose metrics for tracking config state ( #3375 )
...
Expose `vm_relabel_config_*` and `vm_promscrape_config_*` metrics
for tracking relabel and scrape configuration hot-reloads.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3345
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-11-22 00:48:12 +02:00
Aliaksandr Valialkin
c7360e1fa0
app/vmagent/remotewrite: typo fix after c914e4dace
2022-10-13 12:06:24 +03:00
Aliaksandr Valialkin
207b4a6c58
app/vmagent/remotewrite: typo fix after 50f5eae0e0
2022-10-13 10:19:46 +03:00
Aliaksandr Valialkin
087393bcef
lib/promrelabel: remove unconditional sorting of the labels in ParsedConfigs.Apply(), since the sorting isnt needed in many places
...
Sort labels explicitly after calling the ParsedConfigs.Apply() when needed.
This reduces CPU usage when performing metric-level relabeling, where labels' sorting isn't needed.
2022-10-09 14:53:35 +03:00
Aliaksandr Valialkin
b857365b84
app/vmagent/remotewrite: allow specifying per--remoteWrite.url
disk limits for persistent queue with pending data
...
This commit is based on https://github.com/VictoriaMetrics/VictoriaMetrics/pull/3071
Related issue: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2970
2022-10-01 18:41:21 +03:00
Aliaksandr Valialkin
6f9ce3f6d6
lib/flagutil: rename Array to ArrayString
...
This makes the ArrayString more consistent with other Array* types.
While at it, add ArrayBytes type, which will be used for https://github.com/VictoriaMetrics/VictoriaMetrics/pull/3071
2022-10-01 18:28:19 +03:00
Aliaksandr Valialkin
7f0b95b50a
lib/promrelabel: add SanitizeName() function for sanitizing Prometheus metric names and label names
...
Optimize this function by using results cache for input strings.
Use this function all over the code.
This is a follow-up for fcffdba9dc
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3113
2022-09-28 10:02:11 +03:00
Aliaksandr Valialkin
6a6cf9c590
app/{vmagent,vminsert}: add -usePromCompatibleNaming
command-line flag for normalizing metric names and label names in the ingested samples
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3113
Thanks to @erkexzcx for the idea and the initial pull request at https://github.com/VictoriaMetrics/VictoriaMetrics/pull/3146
2022-09-26 13:13:31 +03:00
Aliaksandr Valialkin
336007182c
app/vmagent/remotewrite: go fmt
after 2b55d167d7
2022-09-19 15:14:03 +03:00
Aliaksandr Valialkin
34db3fdd3f
app/vmagent/remotewrite: add benchmarks for comparing the performance of standard Snappy encoder with github.com/klauspost/compress/s2 encoder
...
The standard Snappy encoder from github.com/golang/snappy shows quite good performance number
for compressing the Prometheus remote_write proto messages according to the added benchmarks,
so there is no need in switching to github.com/klauspost/compress/s2 yet.
2022-09-19 14:27:56 +03:00
Aliaksandr Valialkin
1905618d10
all: subsitute ioutil.ReadAll with io.ReadAll
...
ioutil.ReadAll is deprecated since Go1.16 - see https://tip.golang.org/doc/go1.16#ioutil
VictoriaMetrics requires at least Go1.18, so it is OK to switch from ioutil.ReadAll to io.ReadAll.
This is a follow-up for 02ca2342ab
2022-08-22 00:16:04 +03:00
Aliaksandr Valialkin
310779d8b5
lib/promscrape: follow-up after 2c553d5a2f
...
- fix broken tests
- cosmetic code cleanup
- document the change at https://docs.victoriametrics.com/vmagent.html#multitenancy
- document the change at https://docs.victoriametrics.com/CHANGELOG.html
2022-08-08 14:49:16 +03:00
Fury
59fdb4cb72
add support to scrape multi tenant metrics ( #2950 )
...
* add support to scrape multi tenant metrics
* add support to scrape multi tenant metrics
Co-authored-by: 赵福玉 <zhaofuyu@zhaofuyudeMac-mini.local>
2022-08-08 14:49:15 +03:00
Aliaksandr Valialkin
ecbe1ddf1b
lib/promscrape/discovery/ec2: properly handle custom endpoint
option in ec2_sd_configs
...
This option was ignored since d289ecded1
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1287
2022-08-05 18:52:37 +03:00
Roman Khavronenko
23e85e0fc5
vmagent: expose metric vmagent_remotewrite_queues
( #2871 )
...
The new metric `vmagent_remotewrite_queues` exports a static value of
number of configured remote write queus. This metric is useful to
calculate total saturation per each configured URL with given number
of queues. See corresponding changes to vmagent alerts and dashboard.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
2022-07-18 14:41:04 +03:00
Boris Petersen
cbf01ee4ae
fix typo introduced in pr #2604 ( #2866 )
...
Signed-off-by: Boris Petersen <boris.petersen@idealo.de>
2022-07-13 23:45:42 +03:00
Aliaksandr Valialkin
ecc11dc32d
lib/promauth: refactor NewConfig in order to improve maintainability
...
1. Split NewConfig into smaller functions
2. Introduce Options struct for simplifying construction of the Config with various options
This commit is based on https://github.com/VictoriaMetrics/VictoriaMetrics/pull/2684
2022-07-04 14:31:43 +03:00
Aliaksandr Valialkin
1e6b0a1f54
app/vmagent/remotewrite: do not shadow headers
global variable in getAuthConfig
2022-06-30 20:18:43 +03:00
Aliaksandr Valialkin
0f6c17ed06
app/vmagent/remotewrite: clarify descriptions for -remoteWrite.*
options, which must be set per each -remoteWrite.url
2022-06-30 20:18:42 +03:00
Aliaksandr Valialkin
7fc03a1deb
app/vmagent/remotewrite: add -remoteWrite.header
command-line flag for setting additional http headers to send to -remoteWrite.url
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2805
2022-06-30 20:00:59 +03:00
Aliaksandr Valialkin
6c66804fd3
all: locate throttled loggers via logger.WithThrottler() only once and then use them
...
This reduces the contention on logThrottlerRegistryMu mutex when logger.WithThrottler()
is called frequently from concurrent goroutines.
2022-06-27 12:34:30 +03:00
Aliaksandr Valialkin
3ae6300497
lib/promauth: add ability to send additional http headers in requests to scrape targets
...
This solves https://stackoverflow.com/questions/66032498/prometheus-scrape-metric-with-custom-header
2022-06-22 20:40:50 +03:00
Aliaksandr Valialkin
fe2269b999
all: remove explicit "xxhash" name when importing github.com/cespare/xxhash/v2 package
...
This package already has the same name, so there is no need in explicit name
2022-06-21 20:24:28 +03:00
Boris Petersen
3a8b4fab97
Add ability to sign requests for all AWS services ( #2604 )
...
This adds the ability to utilize sigv4 signing for all AWS services not
just "aps". When the newly introduced property "service" is not set it
will default to "aps".
Signed-off-by: Boris Petersen <boris.petersen@idealo.de>
2022-05-20 14:20:00 +03:00
Aliaksandr Valialkin
983b465757
app/vmagent: add missing _total
suffix to vmagent_remotewrite_global_rows_pushed_before_relabel_total
counter
...
This is a follow up for c536139d0b
2022-05-06 15:51:34 +03:00
Aliaksandr Valialkin
2baa9e8f48
app/vmagent: expose vmagent_remotewrite_global_rows_pushed_before_relabel
and vmagent_remotewrite_rows_pushed_after_relabel_total
metrics
2022-05-06 15:30:10 +03:00
Aliaksandr Valialkin
9c89ea1c90
app/vmagent: rename vmagent_remote_write_rate_limit_reached_total
to vmagent_remotewrite_rate_limit_reached_total
for the sake of consistency with other vmagent_remotewrite_
metrics
2022-05-06 15:02:18 +03:00
Aliaksandr Valialkin
873f55bac5
lib/awsapi: pass filtersQueryString
arg to GetEC2APIResponse() function, so the caller could decide whether to use the filters during the AWS API query
...
The filters shouldn't be passed to DescribeAvailabilityZones API call.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1626
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1287
Related commits:
0e09fdb8b0
d289ecded1
2022-05-05 10:29:47 +03:00
Aliaksandr Valialkin
9fea63d1c8
app/vmagent: rename -remoteWrite.useSigv4 command-line flag to -remoteWrite.aws.useSigv4, so its name is consistent with the other -remoteWrite.aws.* command-line flags
2022-05-04 20:41:45 +03:00
Nikolay
7e58cba6cf
{lib/promscrape,app/vmagent}: adds sigv4 support for vmagent remoteWrite ( #2458 )
...
* {lib/promscrape,app/vmagent}: adds sigv4 support for vmagent remoteWrite
moves aws related code into separate lib from lib/promscrape
it allows to write data from vmagent to the AWS managed prometheus (cortex)
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1287
* Apply suggestions from code review
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2022-05-04 20:28:37 +03:00
Gard Rimestad
ceadcb7f8e
app/vmagent add metric for rate limit ( #2521 )
...
This adds a metric for the rate limit.
The limit is present as a flag currently:
`flag{name="remoteWrite.rateLimit", value="500000", is_set="true"} 1`
We are running many instances of vmagent and when creating alerts it is harder than it needs to be when extracting the value from the flag.
With this change it should be easier to monitor how close to the limit we are.
`((100/vmagent_remotewrite_rate_limit{account="account"})*sum (rate(vmagent_remotewrite_conn_bytes_written_total{account="account"}))) and ON (account) flag{name="remoteWrite.rateLimit"} == 1`
2022-05-02 22:25:47 +03:00
Aliaksandr Valialkin
917bb702ef
app/vmagent: substitute hard-to-read 500000000 with 500MB in -remoteWrite.maxDiskUsagePerURL
description
2022-04-26 15:48:44 +03:00
Aliaksandr Valialkin
a57d5dd415
app/vmagent: properly initialize stdDialer
...
This is a follow-up commit for 7da20a4b3f
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1699
2022-04-06 14:00:50 +03:00
Aliaksandr Valialkin
f082e64e0c
app/vmagent: reduce the probability of TLS handshake timeout when dialing the remote storage
...
The following actions are taken:
- Increase the TLS hashdshake timeout from 5 seconds to 10 seconds
- Increase dial timeout from 5 seconds to 30 seconds
- Specify DialContext instead of Dial in http.Transport. This allows properly handling
the Context arg during dialing the remote storage
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1699
2022-04-06 12:35:14 +03:00
Aliaksandr Valialkin
9d91ad7124
app/vmagent/remotewrite: prevent from infinite recursion panic when pushing a time series with big number of samples to remote storage
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2335
2022-03-18 19:07:27 +02:00
Aliaksandr Valialkin
727797a6fd
all: use logger.WithThrottler() where appropriate
2021-12-21 17:10:54 +02:00
Roman Khavronenko
23e1de06ee
vmagent: add error log for skipped data block when rejected by receiv… ( #1956 )
...
* vmagent: add error log for skipped data block when rejected by receiving side
Previously, rejected data blocks were silently dropped - only metrics were update.
From operational perspective, having an additional logging for such cases is preferable.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1911
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmagent: throttle log messages about skipped blocks
The new type of logger was added to logger pacakge.
This new type supposed to control number of logged messages
by time.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/logger: make LogThrottler public, so its methods can be inspected by external packages
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2021-12-21 16:42:38 +02:00
Aliaksandr Valialkin
053e85ff3d
all: typo fix: unexected -> unexpected
2021-12-20 17:40:13 +02:00
Aliaksandr Valialkin
d40441947a
app: allow specifying http and https urls in the following command-line flags
...
* -promscrape.config
* -relabelConfig
* -remoteWrite.relabelConfig
* -remoteWrite.urlRelabelConfig
2021-12-03 00:11:47 +02:00
Aliaksandr Valialkin
e702b7a92f
app/vmagent: allow bigger number of in-memory blocks for big values of -remoteWrite.queues
...
This should improve the maximum data ingestion speed for highly-loaded vmagent instances
which run on beefy servers with many CPU cores and big amounts of RAM
2021-11-05 15:16:50 +02:00
Aliaksandr Valialkin
847004fa77
app/{vminsert,vmagent}: hide passwords and auth tokens by default at /config
page
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1764
2021-11-05 14:42:13 +02:00
Aliaksandr Valialkin
9edc12fa99
app/vmagent/remotewrite: fix parallel data sending to remote storage systems at e0d2ba5608
2021-11-04 16:58:53 +02:00
Aliaksandr Valialkin
63c29099ba
app/vmagent: add -remoteWrite.maxRowsPerBlock
command-line option, which may be used for improving data ingestion performance under high load
2021-11-04 15:39:55 +02:00
Aliaksandr Valialkin
5f13ba8631
app/vmagent/remotewrite: send data to remote storage systems in parallel
...
This should improve data ingestion speed many `-remoteWrite.url` options are configured
2021-11-04 15:04:02 +02:00
Aliaksandr Valialkin
ad445a06cd
lib/promscrape: properly show proxy_url
option value at /config
page
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1755
2021-10-26 21:24:22 +03:00
Nikolay
6ca31acb76
changes vmagent api ( #1656 )
...
* changes vmagent api
adds auth.Token to promremotewrite InsertHandlerReader
changes remoteWrite client constructor, allows to use multiple remoteWriteUrl schemes, like kafka://
changes url path concatenation for tenant remoteWrite
Update app/vmagent/remotewrite/client.go
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* Update app/vmagent/remotewrite/remotewrite.go
* Apply suggestions from code review
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2021-09-29 00:55:14 +03:00
Aliaksandr Valialkin
5c58c8d55e
docs: update -help
output for victoria-metrics and vmagent after f77dde837a
2021-09-01 16:35:18 +03:00
Aliaksandr Valialkin
c4df601f43
lib/promscrape: add the ability to limit the number of unique series per each scrape target
...
The number of series per target can be limited with the following options:
* Global limit with `-promscrape.maxSeriesPerTarget` command-line option.
* Per-target limit with `max_series: N` option in `scrape_config` section.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1561
2021-09-01 16:08:12 +03:00
Aliaksandr Valialkin
48920bdef8
app/vmagent/remotewrite: expose vmagent_remotewrite_send_duration_seconds_total metric
...
This metric can be used for determining high saturation of every connection to remote storage with
an alerting query `rate(vmagent_remotewrite_send_duration_seconds_total) > 0.9s`.
This query triggers when a connection is satureated by more than 90%
2021-08-15 13:34:07 +03:00
Aliaksandr Valialkin
13d438d808
app/vmagent: typo fix in the description for -remoteWrite.queues
2021-08-05 10:00:58 +03:00
Aliaksandr Valialkin
b877538622
app/vmagent: follow-up after fe445f753b
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1491
2021-08-05 09:51:00 +03:00
Omar Ghader
fe445f753b
feature: Add multitenant for vmagent ( #1505 )
...
* feature: Add multitenant for vmagent
* Minor fix
* Fix rcs index out of range
* Minor fix
* Fix multi Init
* Fix multi Init
* Fix multi Init
* Add default multi
* Adjust naming
* Add TenantInserted metrics
* Add TenantInserted metrics
* fix: remove unused metrics for vmagent
* fix: remove unused metrics for vmagent
Co-authored-by: mghader <marc.ghader@ubisoft.com>
Co-authored-by: Sebastian YEPES <syepes@gmail.com>
2021-08-05 09:44:29 +03:00
Aliaksandr Valialkin
51fc469642
app/vmagent/remotewrite: go fmt
after 0a796f7c3a
2021-06-17 13:51:40 +03:00
Zongyang
cf506e300d
Change default value of '-remoteWrite.queues' to cgroup.AvailableCPUs * 2 ( #1385 )
...
* Change default value of '-remoteWrite.queues' to cgroup.AvailableCPUS() * 2 to reduce scrape interval
Default value of vmagent option '-remotewrite.queues' is 4 and default
size of vmagent ScheudleUnmarshalWorkers is number of CPUs, when available
CPUs is much greater than 4, e.g 32, worker are competing push queues
which will increase scrape interval and may cause scrape timeout.
* Update README and flag description
Co-authored-by: xiaozy <xiaozy01@fenbi.com>
2021-06-16 12:37:55 +03:00
Aliaksandr Valialkin
269e35d676
app/{vmagent,vminsert}: follow-up after 2fe045e2a4
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1343
2021-06-04 20:33:22 +03:00
jelmd
d8b46908db
new feature: debug relabeling ( #1344 )
...
* new feature: relabel logging
Use scrape_configs[x].relabel_debug = true to log metric names inkl.
labels before and after relabeling. After relabeling related metrics
get dropped, i.e. not submitted to servers.
* vminsert wants relabel logging, too.
2021-06-04 20:33:21 +03:00
Aliaksandr Valialkin
890e1bd826
app/vmagent/remotewrite: use WARN level instead of ERROR level for couldnt send a block with size ... bytes to ...
log message
...
This is really warning, since vmagent re-tries sending the data block until success.
2021-05-24 15:43:32 +03:00
Aliaksandr Valialkin
71ff7ee18d
lib/promauth: follow-up after 5b8176c68e
2021-05-22 18:02:03 +03:00
Nikolay
2780d6dbcd
basic OAuth2 support for remoteWrite and scrape targets ( #1316 )
...
* adds OAuth2 support for remoteWrite and scrapping
* adds tests
changes init
2021-05-22 18:02:01 +03:00
Aliaksandr Valialkin
d77db9d813
all: do not skip SIGHUP signal during service initialization
...
This can lead to stale or incomplete configs like in the https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1240
2021-05-21 16:38:20 +03:00
Aliaksandr Valialkin
da0b32c31a
app/vmagent/remotewrite: expose metrics with the current number of active series per day and per hour
...
These numbers are exposed via the following metrics:
- vmagent_hourly_series_limit_current_series
- vmagent_daily_series_limit_current_series
Expose also the limits via the following metrics:
- vmagent_hourly_series_limit_max_series
- vmagent_daily_series_limit_max_series
2021-05-20 15:31:57 +03:00
Aliaksandr Valialkin
165a9f9200
app/vmstorage: add ability to limit series cardinality via -storage.maxHourlySeries
and -storage.maxDailySeries
command-line flags
2021-05-20 15:31:57 +03:00
Aliaksandr Valialkin
7aad5c3f76
app/vmagent: add ability to limit series cardinality on a per-hour and per-day basis
2021-05-20 15:31:57 +03:00
Aliaksandr Valialkin
dcac849c1f
app/vmagent/remotewrite: sort labels before sending the series to per-remoteWrite.url queues
2021-05-20 11:54:06 +03:00
Aliaksandr Valialkin
23afbd5094
app/vmagent/remotewrite: clarify the comment explaining why vmagent drops blocks if remote storage returns 400 or 409 status code
2021-05-13 16:17:09 +03:00
Aliaksandr Valialkin
e309b5a83b
app/vmagent/remotewrite: increase the maximum possible number of inmemory blocks for systems with high amounts of RAM
...
This should reduce the probability of using much slower file-based persistent queue
when vmagent processes metrics at high rate (millions of metrics per second).
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1235
2021-04-23 22:05:00 +03:00
Aliaksandr Valialkin
f92db26a93
app/vmagent/remotewrite: count maxLabelsPerBlock as 10x of maxRowsPerBlock
...
This should increase block sizes and subsequently increase the maximum possible bandwidth per each connection to remote storage.
This, in turn, should reduce the probability of storing the data in local buffers.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1235
2021-04-23 22:05:00 +03:00
Aliaksandr Valialkin
6dc5d3b357
all: rename https://victoriametrics.github.io to https://docs.victoriametrics.com
2021-04-20 20:20:01 +03:00
Aliaksandr Valialkin
87700f1259
lib/promscrape: add support for authorization
config in -promscrape.config
as Prometheus 2.26 does
...
See https://github.com/prometheus/prometheus/pull/8512
2021-04-02 21:20:37 +03:00
Aliaksandr Valialkin
512addc608
app/{vminsert,vmagent}: add -sortLabels
command-line option for sorting time series labels before ingesting them in the storage
...
This option can be useful when samples for the same time series are ingested with distinct order of labels.
For example, metric{k1="v1",k2="v2"} and metric{k2="v2",k1="v1"}.
2021-03-31 23:27:21 +03:00
Aliaksandr Valialkin
392ba94d1d
app/vmagent/remotewrite: reduce memory usage when -remoteWrite.queues
is set to a big value
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1167
2021-03-31 16:17:23 +03:00
Aliaksandr Valialkin
b873b965af
app/vmagent/remotewrite: reduce memory usage when samples with big number of labels are sent to remote storage
2021-03-31 00:45:42 +03:00
Aliaksandr Valialkin
3fedf680f8
app/vmagent/remotewrite: remove superflouos code after 1b7dc1e5a5
2021-03-26 14:01:37 +02:00
Nikolay
15ff1f3a94
Adds blocks drop ( #1151 )
...
* adds blocks drop at 400 BadRequest status code
recieved from remote storage,
not expected that remote storage will be able to handle it on retry
* removes error logging for dropped blocks,
its expected error
2021-03-26 14:01:37 +02:00
Aliaksandr Valialkin
b91e18af0e
docs/vmagent.md: add an example for -remoteWrite.label
2021-03-25 17:59:30 +02:00
Aliaksandr Valialkin
2041008d64
app/vmagent: mention -remoteWrite.maxDiskUsagePerURL in the descriptio of -remoteWrite.tmpDataPath
flag
2021-03-23 16:38:41 +02:00
Aliaksandr Valialkin
5e77a939c2
all: make go vet
happy
2021-03-17 00:48:44 +02:00
Aliaksandr Valialkin
b997f4a418
all: make golangci-lint happy after the commit 6378205415
2021-03-17 00:24:31 +02:00
Aliaksandr Valialkin
8005ba26b9
lib/netutil: enable IPv6 UDP listening if -enableTCP6
command-line flag is passed to VictoriaMetrics
...
This is a follow-up for 18cfc4be7b
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1131
2021-03-17 00:19:30 +02:00
Aliaksandr Valialkin
323af49234
app/vmagent/remotewrite: clarify -remoteWrite.flushInterval
flag description
2021-03-01 11:51:08 +02:00
Aliaksandr Valialkin
b8dd5e8292
app/vmagent/remotewrite: fix rate limiting logic for -remoteWrite.url
2021-03-01 00:59:57 +02:00
Aliaksandr Valialkin
d0be1f6f49
app/vmagent: remove data race when applying rate limits to -remoteWrite.url
with multiple queues
2021-03-01 00:28:20 +02:00
Aliaksandr Valialkin
197ecca426
lib/promrelabel: add more optimizations for relabeling for common cases
2021-02-22 16:36:54 +02:00
Aliaksandr Valialkin
72eef964d9
app/vmagent: properly perform graceful shutdown, which was broken in the commit 1d1ba889fe
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1065
2021-02-19 00:34:17 +02:00
Aliaksandr Valialkin
9c81429299
app/vmagent/remotewrite: cleanup after 1d1ba889fe
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1065
2021-02-17 21:43:48 +02:00
Nikolay
40973eda1c
adds pushback for fastqueue, ( #1075 )
...
during shutdown currently sending block was lost,
now its pushed back to fast queue and will be flushed on disk,
it may lead to data duplication.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1065
2021-02-17 21:43:46 +02:00
Aliaksandr Valialkin
fdf9de98f8
app/vmagent: add -remoteWrite.roundDigits command-line option for limiting the number of digits after the point for stored values
...
This commit also adds --vm-round-digits command-line option to vmctl tool.
2021-02-01 14:42:15 +02:00
Aliaksandr Valialkin
4b324da947
all: consistently use timers from timerpool
2021-01-27 00:40:39 +02:00
Aliaksandr Valialkin
29bf531f7d
app/vmagent: add -remoteWrite.rateLimit command-line flag for limiting data rate to remote storage
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1035
2021-01-27 00:40:39 +02:00
Aliaksandr Valialkin
4ee53c3961
all: use net.Dial
instead of fasthttp.Dial
, because fasthttp.Dial
limits the number of concurrent dials to 1000
2021-01-11 12:52:51 +02:00
Aliaksandr Valialkin
49e800ba55
app/vmagent: add vmagent_remotewrite_blocks_sent_total
and vmagent_remotewrite_bytes_sent_total
metrics per each -remoteWrite.url
2020-12-15 20:41:08 +02:00
Nikolay
7064c4eb8e
adds new Array Flags ( #965 )
...
* adds ArrayDuration and ArrayBool flags,
makes sendTimeout and tlsInsecure configurable per remoteWrite url
* added backward compatibility testcases for ArrayDuration and ArrayBool
* fixes bool flag
* fixes test cases
2020-12-15 12:59:33 +02:00
Aliaksandr Valialkin
1a237c6903
all: properly handle CPU limits set on the host system/container
...
This can reduce memory usage on systems with enabled CPU limits.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/946
2020-12-08 21:07:03 +02:00
Aliaksandr Valialkin
7bdf07883b
app/{vmalert,vmagent}: skip empty values in -remoteWrite.label
and -label
lists
2020-12-08 14:54:02 +02:00
Aliaksandr Valialkin
b8083b7659
lib/promscrape: clean references to label name and label value strings after applying per-target relabeling
...
This should reduce memory usage when per-target relabeling creates big number of temporary labels
with long names and/or values.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/825
2020-11-07 16:19:52 +02:00
Aliaksandr Valialkin
887a3c317f
app/vmagent/remotewrite: drop packets only on 409 status code, since there are other valid 4xx status codes, which shouldnt result in packet drop
2020-11-03 14:24:57 +02:00
Aliaksandr Valialkin
ca2e0f1e04
app/vmagent/remotewrite: drop packets if remote storage returns 4xx status code
...
This makes consistent the behaviour with Prometheus.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/873
2020-11-02 00:45:01 +02:00
Aliaksandr Valialkin
5dca7bbe85
app/vmagent/remotewrite: do not show -remoteWrite.url
in logs if -remoteWrite.showURL
isn't set
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/773
2020-09-29 19:49:19 +03:00
Aliaksandr Valialkin
8fc9b77496
app/vmagent: reduce memory usage when importing data via /api/v1/import
...
Previously vmagent could use big amounts of RAM when each ingested JSON line
contained many samples.
2020-09-26 04:10:13 +03:00
Aliaksandr Valialkin
1c07d7bee7
app/vmagent: increase default value for -remoteWrite.queues
from 1 to 4, since it has been appeared that many users hit this limit
2020-09-18 14:22:02 +03:00
Aliaksandr Valialkin
406f4fe445
app/vmagent: substitute -remoteWrite.url
with secret-url
value in logs, since it may contain sensitive info such as passwords or auth tokens
...
Pass `-remoteWrite.showURL` command-line flag in order to see real `-remoteWrite.url` values in logs and at `/metrics` page.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/773
2020-09-16 22:36:18 +03:00
Aliaksandr Valialkin
6382e8081a
app/vmagent: allow setting multiple identical -remoteWrite.url
values
...
This may be useful when each url is authenticated via different `-remoteWrite.basicAuth.username`.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/755
2020-09-11 15:17:29 +03:00
Aliaksandr Valialkin
a3cdef6b06
app/vmagent: properly flush big blocks of data
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/741
Thanks to @IceRain00 for the investigation and initial attempt to fix the issue
at https://github.com/VictoriaMetrics/VictoriaMetrics/pull/742
2020-09-03 12:12:12 +03:00
Aliaksandr Valialkin
de216bab41
app/vmagent: fix data race when accessing writeRequest.lastFlushTime
2020-09-03 12:12:09 +03:00
Aliaksandr Valialkin
6f9c1bc078
app/vmagent: log unsuccessful attempt number when sending data to -remoteWrite.url
2020-08-30 21:40:15 +03:00
Aliaksandr Valialkin
3b1ecac04b
app/vmagent: apply sane limits to -remoteWrite.queues
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/707
2020-08-30 21:25:51 +03:00
Roman Khavronenko
4b89da9463
lib/decimal: rename significant decimal digits
to significant figures
( #698 )
...
The previous notion was inconsistent with what `decimal.Round` does.
According to [wiki](https://en.wikipedia.org/wiki/Significant_figures ) rounding
applied to all significant figures, not just decimal ones.
2020-08-16 17:22:40 +03:00
Aliaksandr Valialkin
6aab2f4989
all: allow using KB
, MB
, GB
, KiB
, MiB
and GiB
suffixes in command-line flag values related to byte sizes or byte rates
2020-08-16 17:08:28 +03:00
Aliaksandr Valialkin
a930460236
app/vmagent: tune http client for sending data to remote storage in order to disable closing keep-alive connections
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/663
2020-08-04 21:01:40 +03:00
Aliaksandr Valialkin
baebe86844
app/vmagent/remotewrite: add missing resp.Body.Close()
after pushing data to remote storage
...
Missing body close could disable HTTP keep-alive connections.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/653
2020-07-28 21:00:25 +03:00
Aliaksandr Valialkin
d5057f6d04
app/vmagent/remotewrite: create new request on failure to send a block of data to remote storage
...
Previously the request body was already consumed before the retry, so this led to the following error:
http: ContentLength=... with Body length 0
2020-07-27 17:33:05 +03:00
Aliaksandr Valialkin
a3f48e395e
app/vmagent: add -remoteWrite.decimalPlaces
command-line flag, which may be used for reducing disk space usage on the remote storage
2020-07-21 21:55:42 +03:00
Aliaksandr Valialkin
3b246aa569
app/vmagent: add -remoteWrite.proxyURL
command-line option
...
This option allows writing data to `-remoteWrite.url` via http, https or socks5 proxy.
This is similar to `proxy_url` option in `remote_write` section of Prometheus.
See https://prometheus.io/docs/prometheus/latest/configuration/configuration/#remote_write
2020-07-20 19:31:08 +03:00
Aliaksandr Valialkin
86b54f3768
app/vmagent/remotewrite: allow passing empty -remoteWrite.urlRelabelConfig
entries
2020-07-20 15:49:13 +03:00
Aliaksandr Valialkin
c2b4b9138d
app/vmagent/remotewrite: return proper value from tssRelabelPool.New
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/599
2020-07-14 14:28:14 +03:00
Aliaksandr Valialkin
4353ff7ef1
app/vmagent: fix data race when multiple -remoteWrite.urlRelabelConfig
options are set
...
Previously multiple goroutines could access remoteWriteCtx.tss concurrently, which could lead to data race
and improper relabeling. Now each goroutine has its own copy of tss during relabeling.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/599
2020-07-10 15:17:23 +03:00
Aliaksandr Valialkin
805a90f642
app/vmagent/remotewrite: typo fix in -remoteWrite.showURL
help message
2020-07-10 14:07:14 +03:00
Aliaksandr Valialkin
6ebac3ab63
app/vminsert: add ability to apply relabeling to all the incoming metrics if -relabelConfig
command-line arg points to a file with a list of relabel_config
entries
...
See https://victoriametrics.github.io/#relabeling
2020-07-02 20:36:33 +03:00
Aliaksandr Valialkin
d962568e93
all: use %w instead of %s for wrapping errors in fmt.Errorf
...
This will simplify examining the returned errors such as httpserver.ErrorWithStatusCode .
See https://blog.golang.org/go1.13-errors for details.
2020-06-30 23:33:46 +03:00
Aliaksandr Valialkin
37aa4fe282
app/vmagent: reload -remoteWrite.relabelConfig and -remoteWrite.urlRelabelConfig on SIGHUP and on /-/reload
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/518
2020-05-30 14:37:02 +03:00
Aliaksandr Valialkin
a646131a33
app/vmagent: log fatal errors instead of panics when improper command-line flags are passed to vmagent
2020-05-30 14:22:38 +03:00
Aliaksandr Valialkin
b59e089ac7
app/vmagent: add -dryRun
option for checking all the configs mentioned in command-line flags without running vmagent
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/362
2020-05-21 15:23:18 +03:00
Aliaksandr Valialkin
6c43ba1cb1
app/vmagent/remotewrite: remove unused import after the commit 93267f143f
2020-05-15 17:42:31 +03:00
Aliaksandr Valialkin
1d71253653
app/vmagent/remotewrite: allow ingesting time series with multiple samples at once
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/481
2020-05-15 17:37:27 +03:00
Aliaksandr Valialkin
3845420a8f
lib: extract common code for returning fast unix timestamp into lib/fasttime
2020-05-14 23:06:50 +03:00
Aliaksandr Valialkin
3b0f66a227
app/vmagent: fix a bug with improper relabeling when multiple -remoteWrite.urlRelableConfig
args are set
...
This bug could result in incorrect relabeling and metrics' drop.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/467
2020-05-12 22:03:45 +03:00