If one out of 5 vmstorage nodes is unavailable, then the remaining 4 vmstorage nodes will recieve 1/5=20% increase of workload, not 5%.
If one out of 10 vmstorage nodes is unavailable, then the remaining 9 vmstorage nodes will receive 1/10=10% increase of workload, not 1%.
This is a follow-up for 458338afa5
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6099
* docs/cluster: update cluster resizing info
- add example of resources distribution
- add info about how to handle uneven disk usage after adding a new storage node
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Update docs/Cluster-VictoriaMetrics.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* Update docs/Cluster-VictoriaMetrics.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit 458338afa5)
Remove description for -search.maxExportDuration and -search.maxStatusRequestDuration command-line flags
from the 'Resource usage limits' chapter, since these flags are rarely used for limiting resource usage
and they are already documented in the 'List of command-line flags' chapter.
* lib/storage: add ability to use downsampling for the given series filter
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs: add information about downsampling filters
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs: fix MetricsQL filter
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage/downsampling: treat missing downsampling filter as a bug
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage/part_header: verify correctness of downsampling filters when opening partition
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage/downsampling: save only appliable rules in part metadata
Filter and save only rules which are appliable to partition based on MinTimestamp of stored data.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage/downsampling: update log messages for final dedup
Properly specify a reason of re-running deduplication for partition.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage: consistently use MaxTimestamp to determine deduplication/downsampling rules
Using MinTimestamp leads to applying downsampling to parts which are only partially covered by downsampling rule.
For example, partition covers range [1000-2000]. At t=2100 and rule offset 500 data with t=2100-500 => 1600 must be downsampled. The range check against MinTimestamp evaluates to true even though partition contains range which must not be downsampled - [1600:2000].
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Follow-up
- Apply the first matching downsampling period if multiple filters match the given time series.
This allows fine-tuning the downsampling config for the specific needs.
- Take into account downsampling filters during search queries.
- Reduce the difference between community and enterprise branches. This should simplify further maintenance of these branches.
- Properly parse series filters with colons inside them.
- Document the feature at docs/CHANGELOG.md.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4960
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
The `match[]` filter is mandatory at /api/v1/series, so it mustn't be dropped here.
There is no sense in dropping `match[]` filter together with `extra_label` and `extra_filters[]`
at /api/v1/labels and /api/v1/label/.../values if -search.ignoreExtraFiltersAtLabelsAPI commnad-line flag is set,
since:
- the `match[]` filter triggers slow path at these APIs;
- the `extra_label` and `extra_filters[]` filters narrow down the number of matched time series,
so they improve performance comparing to the case when only `match[]` filter is left,
while `extra_label` and `extra_filters[]` filters are dropped.
This is a follow-up for 0b7a23a91d
The change also removes misleading `default` value from README for `maxConcurrentInserts`
cmd-line flag.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 73f5fb0f0c)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
It has been appeared that there are VictoriaMetrics users, who rely on the fact that
VictoriaMetrics components were closing incoming connections to -httpListenAddr every 2 minutes
by default. So let's return back this value by default in order to fix the breaking change
made at d8c1db7953 .
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1304#issuecomment-1961891450 .
This commit returns back limits for these endpoints, which have been removed at 5d66ee88bd ,
since it has been appeared that missing limits result in high CPU usage, while the introduced concurrency limiter
results in failed lightweight requests to these endpoints because of timeout when heavyweight requests are executed.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5055
* port un-synced changed from docs/readme to readme
* consistently use `sh` instead of `console` highlight, as it looks like
a more appropriate syntax highlight
* consistently use `sh` instead of `bash`, as it is shorter
* consistently use `yaml` instead of `yml`
See syntax codes here https://gohugo.io/content-management/syntax-highlighting/
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This reverts cd4f641d32 , since it has been appeared that the disabled compression
for vmstorage->vmselect data increase network bandwidth usage by more than 10x on typical production workloads,
while it decreases CPU usage at vmstorage by up to 10% and improves query latency by up to 10%.
The 10x increase in network usage is too high price for 10% improvements on query latency and vmstorage CPU usage.
This may result in network bandwidth bottlenecks, which can reduce the overall performance and stability
of VictoriaMetrics cluster. That's why return back the vmstorage->vmselect data compression by default.
The vmstorage->vmselect compression can be disabled by passing -rpc.disableCompression command-line flag to vmstorage.
The vmselect->vmselect compression in multi-level cluster setup can be disabled by passing -clusternative.disableCompression command-line flag.
Examples:
1) -metricsAuthKey=file:///abs/path/to/file - reads flag value from the given absolute filepath
2) -metricsAuthKey=file://./relative/path/to/file - reads flag value from the given relative filepath
3) -metricsAuthKey=http://some-host/some/path?query_arg=abc - reads flag value from the given url
The flag value is automatically updated when the file contents changes.
Each Grafana dashboard has unique ID which can be used to fetch the dashboard
from grafana.com: https://grafana.com/grafana/dashboards/11176
The same dashboard can be accessed via URL with slug: https://grafana.com/grafana/dashboards/11176-victoriametrics-cluster/
But using slug implies that any change to dashboard name will break the link.
So it is better to just use ID, so the dashboard URL will never break.
This is follow-up for ff33e60a3d
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Andrew Chubatiuk <andrew.chubatiuk@motional.com>
Co-authored-by: Nikolay <https://github.com/f41gh7>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit 543f218fe9)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Tests showed that importing a single line with 70MB size takes 5.3GiB
RSS memory for VictoriaMetrics single-node.
In the scenario when user exports and imports data from one VM to another,
it could possibly lead to OOM exception for destination VM.
Importing a single line with 16MB size taks 1.3GiB RSS memory.
Hence, the limit for `import.maxLineLen` was decreased from 100MB to 10MB
to improve reliability of VictoriaMetrics during imports.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* app/vmstorage: close vminsert connections gradually before stopping storage
Implements graceful shutdown approach suggested here - https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4922#issuecomment-1768146878
Test results for this can be found here - https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4922#issuecomment-1790640274
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmstorage: update graceful shutdown logic
- close connections from vminsert in determenistic order
- update flag description
- lower default timeout to 25 seconds. 25 seconds value was chosen because the lowest default value used in default configuration deployments is 30s(default value in Kubernetes and ansible-playbooks).
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/cluster: add information about re-routing enhancement during restart
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/changelog: add entry for new command-line flag
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* {app/vmstorage,lib/ingestserver}: address review feedback
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/cluster: add note to update workload scheduler timeout
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* wip
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Previously entries which were accessed only 1 time weren't cached.
It has been appeared that some rarely executed heavy queries may read indexdb block twice
in a row instead of once. There is no need in caching such a block then.
This change should eliminate cache size spikes for indexdb/dataBlocks when such heavy queries are executed.
Expose -blockcache.missesBeforeCaching command-line flag, which can be used for fine-tuning
the number of cache misses needed before storing the block in the caching.
support `Strict-Transport-Security`, `Content-Security-Policy` and `X-Frame-Options`
HTTP headers in all VictoriaMetrics components.
The values for headers can be specified by users via the following flags:
`-http.header.hsts`, `-http.header.csp` and `-http.header.frameOptions`.
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit ad839aa492)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmselect: limit the number of parallel workers by 32
The change should improve performance and memory usage during query processing
on machines with big number of CPU cores. The number of parallel workers for
query processing is controlled via `-search.maxWorkersPerQuery` command-line flag.
By default, the number of workers is limited by the number of available CPU cores,
but not more than 32. The limit can be increased via `-search.maxWorkersPerQuery`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
- The `-search.maxWorkersPerQuery` command-line flag doesn't limit resource usage,
so move it from the `resource usage limits` to `troubleshooting` chapter at docs/Single-server-VictoriaMetrics.md
- Make more clear the description for the `-search.maxWorkersPerQuery` command-line flag
- Add the description of `-search.maxWorkersPerQuery` to docs/Cluster-VictoriaMetrics.md
- Limit the maximum value, which can be passed to `-search.maxWorkersPerQuery`, to GOMAXPROCS,
because bigger values may worsen query performance and increase CPU usage
- Improve the the description of the change at docs/CHANGELOG.md. Mark it as FEATURE instead of BUGFIX,
since it is closer to a feature than to a bugfix.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5087
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This is a follow-up for f60c08a7bd
Changes:
- Make sure all the urls related to NewRelic protocol start from /newrelic . Previously some urls were started from /api/v1/newrelic
- Remove /api/v1 part from NewRelic urls, since it has no sense
- Remove automatic transformation from CamelCase to snake_case for NewRelic labels and metric names,
since it may complicate the transition from NewRelic to VictoriaMetrics. Preserve all the metric names and label names,
so users could query metrics and labels by the same names which are used in NewRelic.
The automatic transformation from CamelCase to snake_case can be added later as a special action for relabeling rules if needed.
- Properly update per-tenant data ingestion stats at app/vmagent/newrelic/request_handler.go . Previously it was always zero.
- Fix NewRelic urls in vmagent when multitenant data ingestion is enabled. Previously they were mistakenly started from `/`.
- Document NewRelic data ingestion url at docs/Cluster-VictoriaMetrics.md
- Remove superflouos memory allocations at lib/protoparser/newrelic
- Improve tests at lib/protoparser/newrelic/*
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3520
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4712
- Make more clear the docs at docs/enterprise.md, so readers could figure out faster
on how to obtain enterprise key and how to pass it to VictoriaMetrics Enterprise components.
- Fix examples at docs/enterprise.md, which were referring to non-existing `-license-file` command-line flag.
The `-licenseFile` command-line flag must be used instead.
- Improve the description of `-license*` command-line flags, so users could understand
faster how to use them.
- Improve the warning message, which is emitted when the deprecated -eula command-line flag is passed,
so the user could figure out how to switch faster to -license* command-line flags.
- Disallow running VictoriaMetrics components with both -license and -licenseFile command-line flags.
- Disallow running VictoriaMetrics components when -licensFile points to an empty file.
- Consistently use the phrase "This flag is available only in Enterprise binaries" across
all the enterprise-specific command-line flags.
- Remove unneeded level of indirection for `noLicenseMessage` and `expiredMessage` string contants
in order to improve code readability and maintainability.
- Remove unneded `return` statements after `logger.Fatalf()` calls, since these calls exit the app and never return.
- Make sure that the info log message about successful license verification is emitted
when the license is verified successfully. Previously the error message could be logged
when the license payload is invalid or if it misses some required features.
- Document the change at docs/CHANGELOG.md
- Set the default value for -vmstorageUserTimeout to 3 seconds. This is much better
than the 0 value, which means that TCP connection to unreachable vmstorage could block
for up to 16 minutes.
- Document -vmstorageUserTimeout at docs/Cluster-VictoriaMetrics.md
