Commit graph

829 commits

Author SHA1 Message Date
Aliaksandr Valialkin
7a503e0c91
Merge branch 'public-single-node' into pmm-6401-read-prometheus-data-files 2023-10-31 20:28:01 +01:00
Aliaksandr Valialkin
7ac49162c6
lib/storage: follow-up for 29cebd82fb
Use atomic.CompareAndSwapUint32() instead of atomic.LoadUint32() followed by atomic.StoreUint32().
This makes the code more clear.

Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5159
2023-10-31 16:08:54 +01:00
Roman Khavronenko
29cebd82fb
lib/storage: log warning about RO mode only on state change (#5191)
Before, vmstorage would log the same message each second producing excessive
amount of logs.

See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5159

Signed-off-by: hagen1778 <roman@victoriametrics.com>
2023-10-30 10:52:57 +01:00
Aliaksandr Valialkin
42dd71bb63
all: consistently use %w instead of %s in when error is passed to fmt.Errorf()
This allows consistently using errors.Is() for verifying whether the given error wraps some other known error.
2023-10-25 21:24:03 +02:00
hagen1778
fd2d07ba33
lib/storage: follow-up after 188cfe3a85
188cfe3a85

See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5159

Signed-off-by: hagen1778 <roman@victoriametrics.com>
2023-10-17 15:45:14 +02:00
Ilya Trefilov
188cfe3a85
lib/storage: do not create tsid if metric contains stale marker(#5069) (#5174)
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5069
2023-10-17 15:30:58 +02:00
Haleygo
8b6ccad41d
fix ingesting stale point, follow up fe8cc573d1 (#5179) 2023-10-16 09:05:37 +02:00
hagen1778
fe8cc573d1
docs: remove extra / in the end of the link
Signed-off-by: hagen1778 <roman@victoriametrics.com>
2023-10-14 07:43:40 +02:00
Aliaksandr Valialkin
31a3672982
Merge branch 'public-single-node' into pmm-6401-read-prometheus-data-files 2023-10-02 22:36:23 +02:00
Aliaksandr Valialkin
d41841c0c9
lib/{mergeset,storage}: consistently reset isInMerge field in parts passed to mergeParts() before returning from the function
While at it consistently check that the isInMerge field is set in all the parts passed to mergeParts()
2023-10-02 08:05:29 +02:00
Aliaksandr Valialkin
3ca6fea858
lib/{mergeset,storage}: perform at most one assisted merge per each call to addRows/addItems
This should reduce tail latency during data ingestion.

This shouldn't slow down data ingestion in the worst case, since assisted merges are spread among
distinct addRows/addItems calls after this change.
2023-10-01 22:19:46 +02:00
Aliaksandr Valialkin
223ef96198
lib/storage: remove unused atomicSetBool function after 717c53af27 2023-09-25 17:37:24 +02:00
Aliaksandr Valialkin
15dfd94f3b
lib/storage: make it clear that the number of big merge workers always equals to 4
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4915#issuecomment-1733922830
2023-09-25 17:15:45 +02:00
Aliaksandr Valialkin
717c53af27
lib/storage: stop exposing vm_merge_need_free_disk_space metric
This metric confuses users and has no any useful information.

See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/686#issuecomment-1733844128
2023-09-25 16:52:39 +02:00
Aliaksandr Valialkin
1590ddecba
Merge branch 'public-single-node' into pmm-6401-read-prometheus-data-files 2023-09-22 12:33:27 +02:00
Aliaksandr Valialkin
3140ef7261
lib/storage: log fatal error inside searchMetricName() instead of propagating it to the caller
This simplifies the code a bit at searchMetricName() and searchMetricNameWithCache() call sites

This is a result of investigating https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4972
2023-09-22 11:41:06 +02:00
Zakhar Bessarab
bea3431ed1
lib/storage/partition: add check to ensure parts exist on disk (#5017)
* lib/storage/partition: add check to ensure parts exist on disk

If part exists in parts.json but is missing on disk there will be a misleading error similar to "unexpected number of substrings in the part name".

This change forces verification of part existence and throws a correct error in case it is missing on disk.

Such issue can be result of https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5005 or disk corruption.

Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>

* lib/storage/partition: use filepath.Join instead of string concatenation

Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>

* lib/storage/partition: add action points for error message

Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>

* all: add a check for missing part in lib/mergeset and lib/logstorage

---------

Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2023-09-19 11:17:41 +02:00
Aliaksandr Valialkin
b80ebb8bfd
Merge branch 'public-single-node' into pmm-6401-read-prometheus-data-files 2023-09-19 01:15:00 +02:00
faceair
b6ad581b45
lib/storage: remove ForceMergeAllParts internal loop (#4999)
Signed-off-by: faceair <git@faceair.me>
2023-09-15 19:04:54 +02:00
Aliaksandr Valialkin
a09c680170
lib/storage: handle fatal errors inside indexSearch.getTSIDByMetricID() instead of returning them to the caller
This simplifies the code a bit at caller side
2023-09-15 11:55:42 +02:00
Aliaksandr Valialkin
af85055f3a
Merge branch 'public-single-node' into pmm-6401-read-prometheus-data-files 2023-09-09 06:18:18 +02:00
Dima Lazerka
0c7d46d637
flagutil: Make .Msecs private (#4906)
* Introduce flagutil.Duration

To avoid conversion bugs

* Fix tests

* Clarify documentation re. month=31 days

* Add fasttime.UnixTime() to obtain time.Time

The goal is to refactor out the last usage of `.Msecs`.

* Use fasttime for time.Now()

* wip

- Remove fasttime.UnixTime(), since it doesn't improve code readability and maintainability
- Run `make docs-sync` for syncing changes from README.md to docs/ folder
- Make lib/flagutil.Duration.Msec private
- Rename msecsPerMonth const to msecsPer31Days in order to be consistent with retention31Days

---------

Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2023-09-03 10:33:37 +02:00
Aliaksandr Valialkin
edee262ecc
Makefile: update golangci-lint from v1.51.2 to v1.54.2
See https://github.com/golangci/golangci-lint/releases/tag/v1.54.2
2023-09-01 10:16:42 +02:00
Dima Lazerka
e0e856d2e7
Add flagutil.Duration to avoid conversion bugs (#4835)
* Introduce flagutil.Duration

To avoid conversion bugs

* Fix tests

* Comment why not .Seconds()
2023-09-01 09:27:51 +02:00
Nikolay
c5aac34b68
lib/storage: properly caclucate nextRotationTimestamp (#4874)
cause of typo unix millis was used instead of unix for current timestamp
calculation
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4873
2023-08-23 13:22:53 +02:00
Aliaksandr Valialkin
ac6c40e896
all: refer to https://docs.victoriametrics.com/#resource-usage-limits in the error message about -search.max* limit
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4827
2023-08-14 01:57:34 -07:00
Aliaksandr Valialkin
978594f50f
Merge branch 'public-single-node' into pmm-6401-read-prometheus-data-files 2023-08-11 06:45:26 -07:00
Aliaksandr Valialkin
9082a84566
lib/storage: update nextRotationTimestamp relative to the timestamp of the indexdb rotation
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4563
2023-07-28 19:48:10 -07:00
Aliaksandr Valialkin
9f1e9c54c8
Merge branch 'public-single-node' into pmm-6401-read-prometheus-data-files 2023-07-26 14:59:49 -07:00
Nikolay
544fba6826
lib/storage: pre-create timeseries before indexDB rotation (#4652)
* lib/storage: pre-create timeseries before indexDB rotation
during an hour before indexDB rotation start creating records at the next indexDB
it must improve performance during switch for the next indexDB and remove ingestion issues.
Since there is no need for creation new index records for timeseries already ingested into current indexDB
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4563

* lib/storage: further work on indexdb rotation optimization

- Document the change at docs/CHAGNELOG.md
- Move back various caches from indexDB to Storage. This makes the change less intrusive.
  The dateMetricIDCache now takes into account indexDB generation, so it stores (date, metricID)
  entries for both the current and the next indexDB.
- Consolidate the code responsible for idbNext pre-filling into prefillNextIndexDB() function.
  This improves code readability and maintainability a bit.
- Rewrite and simplify the code responsible for calculating the next retention timestamp.
  Add various tests for corner cases of this code.
- Remove indexdb pre-filling from RegisterMetricNames() function, since this function is rarely called.
  It is OK to add indexdb entries on demand in this function. This simplifies the code.

Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401

* docs/CHANGELOG.md: refer to https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4563

---------

Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2023-07-22 15:20:21 -07:00
Aliaksandr Valialkin
140e7b6b74
all: replace atomic.Value with atomic.Pointer[T]
This eliminates the need in .(*T) casting for results obtained from Load()

Leave atomic.Value for map, since atomic.Pointer[map[...]...] makes double pointer to map,
because map is already a pointer type.
2023-07-19 17:42:06 -07:00
Aliaksandr Valialkin
8815080030
app/vmselect/promql: add the ability to copy all the labels from one side of group_left()/group_right() operation
This is performed by specifying `*` inside group_left()/group_right().
Also allow specifying prefix for the copied labels via `group_left(...) prefix "..."` and `group_right(...) prefix "..."` syntax.
For example, the following query adds all the namespace-related labels to pod info, and prefixes all the copied label names with "ns_" prefix:

  kube_pod_info * on(namespace) group_left(*) prefix "ns_" kube_namespace_labels

This resolves the following StackOverflow questions:

- https://stackoverflow.com/questions/76661818/how-to-add-namespace-labels-to-pod-labels-in-prometheus
- https://stackoverflow.com/questions/76653997/how-can-i-make-a-new-copy-of-kube-namespace-labels-metric-with-a-different-name
2023-07-17 19:07:39 -07:00
Aliaksandr Valialkin
6685f6ce7c
lib/storage: move series registration in caches from createAllIndexesForMetricName into a separate function - putSeriesToCache
This makes the code more clear and easier to read

This is a follow-up for 7094fa38bc
2023-07-13 23:13:23 -07:00
Aliaksandr Valialkin
3dacdcb707
lib/storage: optimize BenchmarkIndexDBGetTSIDs()
- Sort MetricName tags only once before the benchmark loop.
- Obtain indexSearch per each benchmark loop in order to give a chance for background merge
  for the recently created parts
2023-07-13 21:56:53 -07:00
Aliaksandr Valialkin
443661a5da
lib/storage: properly free up resources from newTestStorage() by calling stopTestStorage() 2023-07-13 17:13:24 -07:00
Aliaksandr Valialkin
7094fa38bc
lib/storage: switch from global to per-day index for MetricName -> TSID mapping
Previously all the newly ingested time series were registered in global `MetricName -> TSID` index.
This index was used during data ingestion for locating the TSID (internal series id)
for the given canonical metric name (the canonical metric name consists of metric name plus all its labels sorted by label names).

The `MetricName -> TSID` index is stored on disk in order to make sure that the data
isn't lost on VictoriaMetrics restart or unclean shutdown.

The lookup in this index is relatively slow, since VictoriaMetrics needs to read the corresponding
data block from disk, unpack it, put the unpacked block into `indexdb/dataBlocks` cache,
and then search for the given `MetricName -> TSID` entry there. So VictoriaMetrics
uses in-memory cache for speeding up the lookup for active time series.
This cache is named `storage/tsid`. If this cache capacity is enough for all the currently ingested
active time series, then VictoriaMetrics works fast, since it doesn't need to read the data from disk.

VictoriaMetrics starts reading data from `MetricName -> TSID` on-disk index in the following cases:

- If `storage/tsid` cache capacity isn't enough for active time series.
  Then just increase available memory for VictoriaMetrics or reduce the number of active time series
  ingested into VictoriaMetrics.

- If new time series is ingested into VictoriaMetrics. In this case it cannot find
  the needed entry in the `storage/tsid` cache, so it needs to consult on-disk `MetricName -> TSID` index,
  since it doesn't know that the index has no the corresponding entry too.
  This is a typical event under high churn rate, when old time series are constantly substituted
  with new time series.

Reading the data from `MetricName -> TSID` index is slow, so inserts, which lead to reading this index,
are counted as slow inserts, and they can be monitored via `vm_slow_row_inserts_total` metric exposed by VictoriaMetrics.

Prior to this commit the `MetricName -> TSID` index was global, e.g. it contained entries sorted by `MetricName`
for all the time series ever ingested into VictoriaMetrics during the configured -retentionPeriod.
This index can become very large under high churn rate and long retention. VictoriaMetrics
caches data from this index in `indexdb/dataBlocks` in-memory cache for speeding up index lookups.
The `indexdb/dataBlocks` cache may occupy significant share of available memory for storing
recently accessed blocks at `MetricName -> TSID` index when searching for newly ingested time series.

This commit switches from global `MetricName -> TSID` index to per-day index. This allows significantly
reducing the amounts of data, which needs to be cached in `indexdb/dataBlocks`, since now VictoriaMetrics
consults only the index for the current day when new time series is ingested into it.

The downside of this change is increased indexdb size on disk for workloads without high churn rate,
e.g. with static time series, which do no change over time, since now VictoriaMetrics needs to store
identical `MetricName -> TSID` entries for static time series for every day.

This change removes an optimization for reducing CPU and disk IO spikes at indexdb rotation,
since it didn't work correctly - see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401 .

At the same time the change fixes the issue, which could result in lost access to time series,
which stop receving new samples during the first hour after indexdb rotation - see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698

The issue with the increased CPU and disk IO usage during indexdb rotation will be addressed
in a separate commit according to https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401#issuecomment-1553488685

This is a follow-up for 1f28b46ae9
2023-07-13 16:07:30 -07:00
Aliaksandr Valialkin
3b50b94f7a
lib/storage: fix possible test failure in TestStorageAddRowsConcurrent
The number of parts in the snapshot partition may be zero if concurrent goroutine just
started creating new partition, but didn't put data into it yet when the current
goroutine made a snapshot.
2023-07-13 15:03:45 -07:00
Aliaksandr Valialkin
a2e224593e
Merge branch 'public-single-node' into pmm-6401-read-prometheus-data-files 2023-07-06 23:51:50 -07:00
Aliaksandr Valialkin
152ca00fb8
docs/CHANGELOG.md: clarify description for https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4336 bugfix
This is a follow-up for 5eb5df96e2
2023-07-06 17:09:03 -07:00
Aliaksandr Valialkin
aeac39cfd1
lib/storage: do not create flock.lock files at partition directories, since it is created at the Storage level 2023-06-19 22:48:37 -07:00
Nikolay
5eb5df96e2
lib/storage: creates parts.json on start-up if it not exists. (#4450)
* lib/storage: creates parts.json on start-up if it not exists.
It fixes migrations from versions below v1.90.0.
Previously parts.json was created only after successful merge.
But if merge was interruped for some reason (OOM or shutdown), parts.json wasn't created and partitions left after interruped merge weren't properly deleted.
Since VM cannot check if it must be removed or not.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4336

* Apply suggestions from code review

Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>

* Update lib/storage/partition.go

Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>

---------

Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
2023-06-15 11:19:22 +02:00
Roman Khavronenko
f50f35a8e0
lib/storage: add comment for how mustBeDeleted field should be used (#4454)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
2023-06-15 11:17:45 +02:00
Aliaksandr Valialkin
43f0baabcd
Merge branch 'public-single-node' into pmm-6401-read-prometheus-data-files 2023-05-18 12:34:50 -07:00
Aliaksandr Valialkin
1f28b46ae9
lib/storage: revert the migration from global to per-day index for (MetricName -> TSID)
This reverts the following commits:
- e0e16a2d36
- 2ce02a7fe6

The reason for revert: the updated logic breaks assumptions made
when fixing https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698 .
For example, if a time series stop receiving new samples during the first
day after the indexdb rotation, there are chances that the time series
won't be registered in the new indexdb. This is OK until the next indexdb
rotation, since the time series is registered in the previous indexdb,
so it can be found during queries. But the time series will become invisible
for search after the next indexdb rotation, while its data is still there.

There is also incompletely solved issue with the increased CPU and disk IO resource
usage just after the indexdb rotation. There was an attempt to fix it, but it didn't fix
it in full, while introducing the issue mentioned above. See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401

TODO: to find out the solution, which simultaneously solves the following issues:
- increased memory usage for setups high churn rate and long retention (e.g. what the reverted commit does)
- increased CPU and disk IO usage during indexdb rotation ( https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401 )
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698

Possible solution - to create the new indexdb in one hour before the indexdb rotation
and to gradually pre-populate it with the needed index data during the last hour before indexdb rotation.
Then the new indexdb will contain all the needed data just after the rotation,
so it won't trigger increased CPU and disk IO.
2023-05-18 11:30:49 -07:00
Haleygo
1531d757ea fix lint check 2023-05-17 13:51:36 +02:00
Aliaksandr Valialkin
e0e16a2d36
lib/storage: follow-up after 2ce02a7fe6
- Document the change at docs/CHANGELOG.md
- Clarify comments for non-trivial code touched by the commit
- Improve the logic behind maybeCreateIndexes():
  - Correctly create per-day indexes if the indexdb rotation is performed during
    the first hour or the last hour of the day by UTC.
    Previously there was a possibility of missing index entries on that day.
  - Increase the duration for creating new indexes in the current indexdb for up to 22 hours
    after indexdb rotation. This should reduce the increased resource usage
    after indexdb rotation.
    It is safe to postpone index creation for the current day until the last hour
    of the current day after indexdb rotation by UTC, since the corresponding (date, ...)
    entries exist in the previous indexdb.
- Search for TSID by (date, MetricName) in both the current and the previous indexdb.
  Previously the search was performed only in the current indexdb. This could lead
  to excess creation of per-day indexes for the current day just after indexdb rotation.
- Search for (date, metricID) entries in both the current and the previous indexdb.
  Previously the search was performed only in the current indexdb. This could lead
  to excess creation of per-day indexes for the current day just after indexdb rotation.
2023-05-16 23:19:27 -07:00
Roman Khavronenko
2ce02a7fe6
lib/storage: introduce per-day MetricName=>TSID index (#4252)
The new index substitutes global MetricName=>TSID index
used for locating TSIDs on ingestion path.
For installations with high ingestion and churn rate, global
MetricName=>TSID index can grow enormously making
index lookups too expensive. This also results into bigger
than expected cache growth for indexdb blocks.

New per-day index supposed to be much smaller and more efficient.
This should improve ingestion speed and reliability during
re-routings in cluster.

The negative outcome could be occupied disk size, since
per-day index is more expensive comparing to global index.

Signed-off-by: hagen1778 <roman@victoriametrics.com>
2023-05-16 15:46:42 -07:00
Aliaksandr Valialkin
278278af95
lib/storage: reduce the unimportant logging during Storage start / stop
This should improve the visibility of potentially important logs
2023-05-16 15:14:21 -07:00
Aliaksandr Valialkin
09b403d38a
lib/{mergeset,storage}: make it clear that DebugFlush() doesn't store all the recently ingested data to disk
DebugFlush() makes sure that the recently ingested data becomes visible to search.

Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4272
2023-05-16 11:50:17 -07:00
Zakhar Bessarab
242050ba94
lib/storage: follow-up after a50d63c376 (#4289)
* lib/storage: follow-up after a50d63c376

- ensure retentionMsecs is rounded to day
- remove localTimeOffset in test as localOffset is ignored when using `UnixMilli`

Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>

* lib/storage: restore retention timezone offset effect on retention deadline

Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>

---------

Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
2023-05-16 17:14:08 +02:00