Commit graph

238 commits

Author SHA1 Message Date
Aliaksandr Valialkin
d41218613b
lib/storage: follow-up for 4b8088e377
- Clarify the bugfix description at docs/CHANGELOG.md
- Simplify the code by accessing prefetchedMetricIDs struct under the lock
  instead of using lockless access to immutable struct.
  This shouldn't worsen code scalability too much on busy systems with many CPU cores,
  since the code executed under the lock is quite small and fast.
  This allows removing cloning of prefetchedMetricIDs struct every time
  new metric names are pre-fetched. This should reduce load on Go GC,
  since the cloning of uin64set.Set struct allocates many new objects.
2024-01-16 22:43:13 +02:00
Roman Khavronenko
29908eaa6c
lib/storage: properly check for storage/prefetchedMetricIDs cache expiration deadline (#5607)
Before, this cache was limited only by size.
Cache invalidation by time happens with jitter to prevent thundering herd problem.

Signed-off-by: hagen1778 <roman@victoriametrics.com>
2024-01-16 22:39:56 +02:00
Aliaksandr Valialkin
8981e53a56
lib/storage: follow-up for 29cebd82fb
Use atomic.CompareAndSwapUint32() instead of atomic.LoadUint32() followed by atomic.StoreUint32().
This makes the code more clear.

Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5159
2023-10-31 16:28:09 +01:00
Roman Khavronenko
d23334a427
lib/storage: log warning about RO mode only on state change (#5191)
Before, vmstorage would log the same message each second producing excessive
amount of logs.

See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5159

Signed-off-by: hagen1778 <roman@victoriametrics.com>
2023-10-31 16:28:07 +01:00
hagen1778
ab4ab5b921
lib/storage: follow-up after 188cfe3a85
188cfe3a85

See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5159

Signed-off-by: hagen1778 <roman@victoriametrics.com>
2023-10-27 14:29:08 +02:00
Ilya Trefilov
f61aa472bb
lib/storage: do not create tsid if metric contains stale marker(#5069) (#5174)
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5069
2023-10-27 14:26:47 +02:00
Nikolay
8bc42baf19
lib/storage: properly caclucate nextRotationTimestamp (#4874)
cause of typo unix millis was used instead of unix for current timestamp
calculation
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4873

(cherry picked from commit c5aac34b68)
2023-08-23 14:14:15 +02:00
Aliaksandr Valialkin
89ccf19b70
lib/storage: update nextRotationTimestamp relative to the timestamp of the indexdb rotation
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4563
2023-07-28 19:48:42 -07:00
Nikolay
30b32583f4
lib/storage: pre-create timeseries before indexDB rotation (#4652)
* lib/storage: pre-create timeseries before indexDB rotation
during an hour before indexDB rotation start creating records at the next indexDB
it must improve performance during switch for the next indexDB and remove ingestion issues.
Since there is no need for creation new index records for timeseries already ingested into current indexDB
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4563

* lib/storage: further work on indexdb rotation optimization

- Document the change at docs/CHAGNELOG.md
- Move back various caches from indexDB to Storage. This makes the change less intrusive.
  The dateMetricIDCache now takes into account indexDB generation, so it stores (date, metricID)
  entries for both the current and the next indexDB.
- Consolidate the code responsible for idbNext pre-filling into prefillNextIndexDB() function.
  This improves code readability and maintainability a bit.
- Rewrite and simplify the code responsible for calculating the next retention timestamp.
  Add various tests for corner cases of this code.
- Remove indexdb pre-filling from RegisterMetricNames() function, since this function is rarely called.
  It is OK to add indexdb entries on demand in this function. This simplifies the code.

Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401

* docs/CHANGELOG.md: refer to https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4563

---------

Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2023-07-22 15:23:14 -07:00
Aliaksandr Valialkin
992c300ce9
all: replace atomic.Value with atomic.Pointer[T]
This eliminates the need in .(*T) casting for results obtained from Load()

Leave atomic.Value for map, since atomic.Pointer[map[...]...] makes double pointer to map,
because map is already a pointer type.
2023-07-19 17:48:26 -07:00
Aliaksandr Valialkin
3d23fd9853
lib/storage: move series registration in caches from createAllIndexesForMetricName into a separate function - putSeriesToCache
This makes the code more clear and easier to read

This is a follow-up for 7094fa38bc
2023-07-13 23:17:14 -07:00
Aliaksandr Valialkin
7d359d17d1
lib/storage: properly free up resources from newTestStorage() by calling stopTestStorage() 2023-07-13 17:13:34 -07:00
Aliaksandr Valialkin
e1cf962bad
lib/storage: switch from global to per-day index for MetricName -> TSID mapping
Previously all the newly ingested time series were registered in global `MetricName -> TSID` index.
This index was used during data ingestion for locating the TSID (internal series id)
for the given canonical metric name (the canonical metric name consists of metric name plus all its labels sorted by label names).

The `MetricName -> TSID` index is stored on disk in order to make sure that the data
isn't lost on VictoriaMetrics restart or unclean shutdown.

The lookup in this index is relatively slow, since VictoriaMetrics needs to read the corresponding
data block from disk, unpack it, put the unpacked block into `indexdb/dataBlocks` cache,
and then search for the given `MetricName -> TSID` entry there. So VictoriaMetrics
uses in-memory cache for speeding up the lookup for active time series.
This cache is named `storage/tsid`. If this cache capacity is enough for all the currently ingested
active time series, then VictoriaMetrics works fast, since it doesn't need to read the data from disk.

VictoriaMetrics starts reading data from `MetricName -> TSID` on-disk index in the following cases:

- If `storage/tsid` cache capacity isn't enough for active time series.
  Then just increase available memory for VictoriaMetrics or reduce the number of active time series
  ingested into VictoriaMetrics.

- If new time series is ingested into VictoriaMetrics. In this case it cannot find
  the needed entry in the `storage/tsid` cache, so it needs to consult on-disk `MetricName -> TSID` index,
  since it doesn't know that the index has no the corresponding entry too.
  This is a typical event under high churn rate, when old time series are constantly substituted
  with new time series.

Reading the data from `MetricName -> TSID` index is slow, so inserts, which lead to reading this index,
are counted as slow inserts, and they can be monitored via `vm_slow_row_inserts_total` metric exposed by VictoriaMetrics.

Prior to this commit the `MetricName -> TSID` index was global, e.g. it contained entries sorted by `MetricName`
for all the time series ever ingested into VictoriaMetrics during the configured -retentionPeriod.
This index can become very large under high churn rate and long retention. VictoriaMetrics
caches data from this index in `indexdb/dataBlocks` in-memory cache for speeding up index lookups.
The `indexdb/dataBlocks` cache may occupy significant share of available memory for storing
recently accessed blocks at `MetricName -> TSID` index when searching for newly ingested time series.

This commit switches from global `MetricName -> TSID` index to per-day index. This allows significantly
reducing the amounts of data, which needs to be cached in `indexdb/dataBlocks`, since now VictoriaMetrics
consults only the index for the current day when new time series is ingested into it.

The downside of this change is increased indexdb size on disk for workloads without high churn rate,
e.g. with static time series, which do no change over time, since now VictoriaMetrics needs to store
identical `MetricName -> TSID` entries for static time series for every day.

This change removes an optimization for reducing CPU and disk IO spikes at indexdb rotation,
since it didn't work correctly - see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401 .

At the same time the change fixes the issue, which could result in lost access to time series,
which stop receving new samples during the first hour after indexdb rotation - see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698

The issue with the increased CPU and disk IO usage during indexdb rotation will be addressed
in a separate commit according to https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401#issuecomment-1553488685

This is a follow-up for 1f28b46ae9
2023-07-13 17:03:50 -07:00
Aliaksandr Valialkin
0ebfb91aba
lib/storage: revert the migration from global to per-day index for (MetricName -> TSID)
This reverts the following commits:
- e0e16a2d36
- 2ce02a7fe6

The reason for revert: the updated logic breaks assumptions made
when fixing https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698 .
For example, if a time series stop receiving new samples during the first
day after the indexdb rotation, there are chances that the time series
won't be registered in the new indexdb. This is OK until the next indexdb
rotation, since the time series is registered in the previous indexdb,
so it can be found during queries. But the time series will become invisible
for search after the next indexdb rotation, while its data is still there.

There is also incompletely solved issue with the increased CPU and disk IO resource
usage just after the indexdb rotation. There was an attempt to fix it, but it didn't fix
it in full, while introducing the issue mentioned above. See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401

TODO: to find out the solution, which simultaneously solves the following issues:
- increased memory usage for setups high churn rate and long retention (e.g. what the reverted commit does)
- increased CPU and disk IO usage during indexdb rotation ( https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401 )
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698
2023-05-18 11:28:54 -07:00
Aliaksandr Valialkin
67beb8c856
lib/storage: follow-up after 2ce02a7fe6
- Document the change at docs/CHANGELOG.md
- Clarify comments for non-trivial code touched by the commit
- Improve the logic behind maybeCreateIndexes():
  - Correctly create per-day indexes if the indexdb rotation is performed during
    the first hour or the last hour of the day by UTC.
    Previously there was a possibility of missing index entries on that day.
  - Increase the duration for creating new indexes in the current indexdb for up to 22 hours
    after indexdb rotation. This should reduce the increased resource usage
    after indexdb rotation.
    It is safe to postpone index creation for the current day until the last hour
    of the current day after indexdb rotation by UTC, since the corresponding (date, ...)
    entries exist in the previous indexdb.
- Search for TSID by (date, MetricName) in both the current and the previous indexdb.
  Previously the search was performed only in the current indexdb. This could lead
  to excess creation of per-day indexes for the current day just after indexdb rotation.
- Search for (date, metricID) entries in both the current and the previous indexdb.
  Previously the search was performed only in the current indexdb. This could lead
  to excess creation of per-day indexes for the current day just after indexdb rotation.
2023-05-16 23:31:59 -07:00
Roman Khavronenko
c3b1d9ee21
lib/storage: introduce per-day MetricName=>TSID index (#4252)
The new index substitutes global MetricName=>TSID index
used for locating TSIDs on ingestion path.
For installations with high ingestion and churn rate, global
MetricName=>TSID index can grow enormously making
index lookups too expensive. This also results into bigger
than expected cache growth for indexdb blocks.

New per-day index supposed to be much smaller and more efficient.
This should improve ingestion speed and reliability during
re-routings in cluster.

The negative outcome could be occupied disk size, since
per-day index is more expensive comparing to global index.

Signed-off-by: hagen1778 <roman@victoriametrics.com>
2023-05-16 23:18:11 -07:00
Aliaksandr Valialkin
bc98ea9a8d
lib/storage: reduce the unimportant logging during Storage start / stop
This should improve the visibility of potentially important logs
2023-05-16 15:32:35 -07:00
Aliaksandr Valialkin
f09745f613
lib/{mergeset,storage}: make it clear that DebugFlush() doesn't store all the recently ingested data to disk
DebugFlush() makes sure that the recently ingested data becomes visible to search.

Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4272
2023-05-16 11:55:58 -07:00
Zakhar Bessarab
a2fc912c43
lib/storage: follow-up after a50d63c376 (#4289)
* lib/storage: follow-up after a50d63c376

- ensure retentionMsecs is rounded to day
- remove localTimeOffset in test as localOffset is ignored when using `UnixMilli`

Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>

* lib/storage: restore retention timezone offset effect on retention deadline

Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>

---------

Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
2023-05-16 10:13:20 -07:00
Nikolay
8c9dc837b9
lib/storage: properly update link for entry at dateMetricID cache (#4258)
previously during sync for mutable and immutable cache parts, link for hotEntry with current date may be not properly updated
it corrupts cache for backfilling metrics and increased cpu load
2023-05-09 21:39:41 -07:00
Zakhar Bessarab
348693ff84
lib/storage: fix indexdb rotation infinite loop (#4249)
When using `retentionTimezoneOffset` and having local timezone being more than 4 hours different from UTC indexdb retention calculation could return negative value. This caused indexdb rotation to get in loop.
Fix calculation of offset to use `retentionTimezoneOffset` value properly and add test to cover all legit timezone configs.
See:
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4207
- https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4206

Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
2023-05-09 21:23:01 -07:00
Aliaksandr Valialkin
d739511f5b
lib/storage: replace OpenStorage() with MustOpenStorage()
Callers of OpenStorage() log the returned error and exit.
The error logging and exit can be performed inside MustOpenStorage()
alongside with printing the stack trace for better debuggability.
This simplifies the code at caller side.
2023-04-14 23:04:42 -07:00
Aliaksandr Valialkin
cf4701db65
lib/fs: add MustReadDir() function
Use fs.MustReadDir() instead of os.ReadDir() across the code in order to reduce the code verbosity.
The fs.MustReadDir() logs the error with the directory name and the call stack on error
before exit. This information should be enough for debugging the cause of the error.
2023-04-14 22:11:40 -07:00
Aliaksandr Valialkin
292b6a851f
all: consistently use fs.MustClose() for closing lock files 2023-04-14 20:16:11 -07:00
Aliaksandr Valialkin
a7678350ad
lib/fs: convert CreateFlockFile to MustCreateFlockFile
Callers of CreateFlockFile log the returned err and exit.
It is better to log the error inside the MustCreateFlockFile together with the path
to the specified directory and the call stack. This simplifies
the code at the callers' side while leaving the debuggability at the same level.
2023-04-14 19:51:52 -07:00
Aliaksandr Valialkin
f75b1b7a53
lib/fs: add Must prefix to CopyDirectory and CopyFile functions
Callers of these functions log the returned error and then exit.
Let's log the error with the call stack inside the function itself.
This simplifies the code at callers' side, while leaving the same
level of debuggability in case of errors.
2023-04-13 23:04:37 -07:00
Aliaksandr Valialkin
75b74aa837
lib/fs: rename SymlinkRelative to MustSymlinkRelative
Callers of this function log the returned error and then exit.
Let's log the error with the call stack inside the function itself.
This simplifies the code at callers' side, while leaving the same
level of debuggability in case of errors.
2023-04-13 22:53:11 -07:00
Aliaksandr Valialkin
c4638553a3
lib/fs: rename WriteFileAtomically to MustWriteAtomic
Callers of this function log the returned error and exit.
So let's just log the error with the given filepath and the call stack
inside the function itself and then exit. This simplifies the code
at callers' place while leaves the same level of debuggability in case of errors.
2023-04-13 22:43:30 -07:00
Aliaksandr Valialkin
aac3dccfd1
lib/fs: replace MkdirAllIfNotExist->MustMkdirIfNotExist and MkdirAllFailIfExist->MustMkdirFailIfExist
Callers of these functions log the returned error and then exit. The returned error already contains the path
to directory, which was failed to be created. So let's just log the error together with the call stack
inside these functions. This leaves the debuggability of the returned error at the same level
while allows simplifying the code at callers' side.

While at it, properly use MustMkdirFailIfExist instead of MustMkdirIfNotExist inside inmemoryPart.MustStoreToDisk().
It is expected that the inmemoryPart.MustStoreToDick() must fail if there is already a directory under the given path.
2023-04-13 22:22:08 -07:00
Haleygo
7ee32ed06a
fix sort pendingDateMetricsIDs (#4102) 2023-04-10 10:16:36 -07:00
Aliaksandr Valialkin
52734c71fc
lib/storage: use shorter code after 03bde173b7 2023-04-02 21:35:34 -07:00
faceair
03bde173b7
lib/storage: fix reuse pendingMetricRow (#4049) 2023-04-02 21:28:43 -07:00
Roman Khavronenko
5f95f9d453
lib/storage: check for free disk space before opening tables (#4035)
* lib/storage: check for free disk space before opening tables

We check for free disk space before call to `openTable`,
so `Storage` can be set to ReadOnly before mergeWorkers start.

Before the change, there was a chance that merges will start
even if Storage has to start in ReadOnly mode because of
`-storage.minFreeDiskSpaceBytes` limit.

https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4023
Signed-off-by: hagen1778 <roman@victoriametrics.com>

* lib/storage: chore

Signed-off-by: hagen1778 <roman@victoriametrics.com>

* Update lib/storage/storage.go

---------

Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2023-03-31 23:50:56 -07:00
Aliaksandr Valialkin
f6c36d5dfd
lib/storage: consistently use OS-independent separator in file paths
This is needed for Windows support, which uses `\` instead of `/` as file separator

Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70
2023-03-25 14:34:36 -07:00
Aliaksandr Valialkin
fc3d826d7f
all: add Windows build for VictoriaMetrics
This commit changes background merge algorithm, so it becomes compatible with Windows file semantics.

The previous algorithm for background merge:

1. Merge source parts into a destination part inside tmp directory.
2. Create a file in txn directory with instructions on how to atomically
   swap source parts with the destination part.
3. Perform instructions from the file.
4. Delete the file with instructions.

This algorithm guarantees that either source parts or destination part
is visible in the partition after unclean shutdown at any step above,
since the remaining files with instructions is replayed on the next restart,
after that the remaining contents of the tmp directory is deleted.

Unfortunately this algorithm doesn't work under Windows because
it disallows removing and moving files, which are in use.

So the new algorithm for background merge has been implemented:

1. Merge source parts into a destination part inside the partition directory itself.
   E.g. now the partition directory may contain both complete and incomplete parts.
2. Atomically update the parts.json file with the new list of parts after the merge,
   e.g. remove the source parts from the list and add the destination part to the list
   before storing it to parts.json file.
3. Remove the source parts from disk when they are no longer used.

This algorithm guarantees that either source parts or destination part
is visible in the partition after unclean shutdown at any step above,
since incomplete partitions from step 1 or old source parts from step 3 are removed
on the next startup by inspecting parts.json file.

This algorithm should work under Windows, since it doesn't remove or move files in use.
This algorithm has also the following benefits:

- It should work better for NFS.
- It fits object storage semantics.

The new algorithm changes data storage format, so it is impossible to downgrade
to the previous versions of VictoriaMetrics after upgrading to this algorithm.

Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3236
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3821
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70
2023-03-19 23:28:26 -07:00
Aliaksandr Valialkin
8aeee8bcca
lib/{fs,mergeset,storage}: substitute os.Open()+os.File.Readdir() with os.ReadDir()
This simplifies code a bit
2023-03-17 21:03:52 -07:00
Nikolay
3caf898a83
lib/storage: correctly handle io.EOF error for pre-fetched metrics (#3946)
io.EOF shouldn't be returned from this function. It breaks all search
API logic and may result in empty query results.
2023-03-12 00:19:58 -08:00
Aliaksandr Valialkin
1ad0d22e80
lib/storage: follow-up for 39cdc546dd
- Use flag.Duration instead of flagutil.Duration for -snapshotCreateTimeout,
  since the flagutil.Duration is intended mostly for big durations, e.g. days, months and years,
  while the -snapshotCreateTimeout is usually smaller than one hour.
- Add links to https://docs.victoriametrics.com/#how-to-work-with-snapshots in docs/CHANGELOG.md,
  so readers could easily find the corresponding docs when reading the changelog.
- Properly remove all the created directories on unsuccessful attempt to create
  snapshot in Storage.CreateSnapshot().

Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3551
2023-02-27 13:11:10 -08:00
Zakhar Bessarab
26682e369e
lib/storage: enhancements for snapshots process (#3873)
* lib/{fs,mergeset,storage}: skip `.must-remove.` dirs when creating snapshot (#3858)

* lib/{mergeset,storage}: add timeout configuration for snapshots creation, remove incomplete snapshots from storage

* docs: fix formatting

* app/vmstorage: add metrics to track status of snapshots

* app/vmstorage: use `vm_http_requests_total` metric for snapshot endpoints metrics, rename new flag to make name more clear

Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>

* app/vmstorage: update flag name in docs

Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>

* app/vmstorage: reflect new metrics names change in docs

Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>

---------

Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2023-02-27 13:11:06 -08:00
Oleksandr Redko
0e1c395609
app,lib: fix typos in comments (#3804) 2023-02-13 09:32:35 -08:00
Aliaksandr Valialkin
103dfd0525
lib/{mergeset,storage}: do not slow down concurrently executed queries during assisted merges
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3647
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3641
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/648
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/291
2023-01-16 14:45:40 -08:00
Aliaksandr Valialkin
b7a4650ab0
all: use metricsql.CompileRegexp instead of regexp.Compile for compiling regexps used in graphite queries
This should speed up repeated queries, since metricsql.CompileRegexp returns regexps from the cache
on subsequent calls for the same input regexp.
2023-01-09 21:45:34 -08:00
Aliaksandr Valialkin
b275983403
lib/writeconcurrencylimiter: improve the logic behind -maxConcurrentInserts limit
Previously the -maxConcurrentInserts was limiting the number of established client connections,
which write data to VictoriaMetrics. Some of these connections could be idle.
Such connections do not consume big amounts of CPU and RAM, so there is a little sense in limiting
the number of such connections. So now the -maxConcurrentInserts command-line option
limits the number of concurrently executed insert requests, not including idle connections.

It is recommended removing -maxConcurrentInserts command-line option, since the default value
for this option should work good for most cases.
2023-01-06 22:07:16 -08:00
Roman Khavronenko
57277ed6bc
vmstorage: add more context to the flock acquiring msg (#3584)
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3578

Signed-off-by: hagen1778 <roman@victoriametrics.com>

Signed-off-by: hagen1778 <roman@victoriametrics.com>
2023-01-05 18:32:53 -08:00
Aliaksandr Valialkin
1a88fe5b1f
lib/flagutil/bytes.go: properly handle values bigger than 2GiB on 32-bit architectures
This fixes handling of values bigger than 2GiB for the following command-line flags:

- -storage.minFreeDiskSpaceBytes
- -remoteWrite.maxDiskUsagePerURL
2022-12-14 19:29:57 -08:00
Aliaksandr Valialkin
a13d21513e
lib/mergeset: panic when too long item is passed to Table.AddItems() 2022-12-03 23:37:20 -08:00
Aliaksandr Valialkin
dccd70ce10
lib/storage: remove duplicate logging for filepath on errors 2022-12-03 23:15:28 -08:00
Aliaksandr Valialkin
10a17bfa16
lib/{storage,mergeset}: consistency rename: `flushRaw{Rows,Items} -> flushPending{Rows,Items} 2022-12-03 22:18:05 -08:00
Aliaksandr Valialkin
d8303845ef
lib/storage: fix TestUpdateCurrHourMetricIDs test when it runs on the first hour of the day by UTC 2022-12-02 17:23:59 -08:00
Zakhar Bessarab
e407e7243a
{app/vmstorage,app/vmselect}: add API to get list of existing tenants (#3348)
* {app/vmstorage,app/vmselect}: add API to get list of existing tenants

* {app/vmstorage,app/vmselect}: add API to get list of existing tenants

* app/vmselect: fix error message

* {app/vmstorage,app/vmselect}: fix error messages

* app/vmselect: change log level for error handling

* wip

Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
2022-11-25 10:32:45 -08:00