* It was necessary to add default ports for fasthttp client. After migration to the std.httpclient it's no longer needed.
* An additional configuration is required at proxy servers with implicitly set 80/443 ports to the host header (such as HA proxy.
It's expected that after upgrade __address_ label may change. But it should be rare case. 80/443 ports are not widely used at monitoring ecosystem. And it shouldn't have much impact.
Related issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6792
Co-authored-by: Nikolay <nik@victoriametrics.com>
…eep_metric_names` options in stream aggregation config together
With aggregated data and raw data under the same metric, results would
be confusing.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 62d19369a3)
### Describe Your Changes
This helps to improve reliability of performing backups in environments
with unreliable connection and tolerate temporary errors at S3 provider
side.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6732
Default retry timeout is up to 3 minutes to make this consistent with
the same configuration for GCS:
a05317f61f/lib/backup/gcsremote/gcs.go (L70-L76)
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit cb00b4b00f)
Before, buffer growth was always x2 of its size, which could lead to
excessive memory usage when processing big amount of data.
For example, scraping a target with hundreds of MBs in response could
result into hih memory spikes in vmagent because buffer has to double
its size to fit the response. See
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6759
The change smoothes out the growth rate, trading higher allocation rate
for lower mem usage at certain conditions.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit f28f496a9d)
The resetState arg was used only for the BenchmarkAggregatorsFlushInternalSerial benchmark.
This benchmark was testing aggregate state flush performance by keeping the same state across flushes.
The benhmark didn't reflect the performance and scalability of stream aggregation in production,
while it led to non-trivial code changes related to resetState arg handling.
So let's drop the benchmark together with all the code related to resetState handling,
in order to simplify the code at lib/streamaggr a bit.
Thanks to @AndrewChubatiuk for the original idea at https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6314
Prevsiously every aggregation output was using its own timestamp for the output aggregated samples
in a single aggregation interval. This could result in unexpected inconsitent timesetamps for the output
aggregated samples.
This commit consistently uses the same timestamp across all the output aggregated samples.
This commit makes sure that the duration between subsequent timestamps strictly equals
the configured aggregation interval.
Thanks to @AndrewChubatiuk for the original idea at https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6314
This commit should help https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4580
By introducing this feature, users will have the ability to customize
the sampleLimit parameter on a per-target basis, providing more
flexibility and control over the job execution behavior.
(cherry picked from commit 994796367b)
### Describe Your Changes
This is useful for clients which validate InfluxDB is available before
data ingestion can be started.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6653
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 9877a5e7d5)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Validate files specified via `-tlsKeyFile` and `-tlsCertFile` cmd-line flags on the process start-up. Previously, validation happened on the first connection accepted by HTTP server.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6608
---------
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit e5d279bb71)
This reverts commit e280d90e9a.
Reason for revert: the updated code doesn't improve the performance of table.MustAddRows for the typical case
when rows contain timestamps belonging to ptws[0].
The performance may be improved in theory for the case when all the rows belong to partiton other than ptws[0],
but this partition is automatically moved to ptws[0] by the code at lines
6aad1d43e9/lib/storage/table.go (L287-L298) ,
so the next time the typical case will work.
Also the updated code makes the code harder to follow, since it introduces an additional level of indirection
with non-trivial semantics inside table.MustAddRows - the partition.TimeRangeInPartition() function.
This function needs to be inspected and understood when reading the code at table.MustAddRows().
This function depends on minTsInRows and maxTsInRows vars, which are defined and initialized
many lines above the partition.TimeRangeInPartition() call. This complicates reading and understanding
the code even more.
The previous code was using clearer loop over rows with the clear call to partition.HasTimestamp()
for every timestamp in the row. The partition.HasTimestamp() call is used in the table.MustAddRows()
function multiple times. This makes the use of partition.HasTimestamp() call more consistent,
easier to understand and easier to maintain comparing to the mix of partition.HasTimestamp() and partition.TimeRangeInPartition()
calls.
Aslo, there is no need in documenting some hardcore software engineering refactoring at docs/CHANGLELOG.md,
since the docs/CHANGELOG.md is intended for VictoriaMetrics users, who may not know software engineering.
The docs/CHANGELOG.md must document user-visible changes, and the docs must be concise and clear for VictoriaMetrics users.
See https://docs.victoriametrics.com/contributing/#pull-request-checklist for more details.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6629
### Describe Your Changes
The original logic is not only highly complex but also poorly readable,
so it can be modified to increase readability and reduce time
complexity.
---------
Co-authored-by: Zhu Jiekun <jiekun@victoriametrics.com>
- Mention that credentials can be configured via env variables at both vmbackup and vmrestore docs.
- Make clear that the AZURE_STORAGE_DOMAIN env var is optional at https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables
- Use string literals as is for env variable names instead of indirecting them via string constants.
This makes easier to read and understand the code. These environment variable names aren't going to change
in the future, so there is no sense in hiding them under string constants with some other names.
- Refer to https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables in error messages
when auth creds are improperly configured. This should simplify figuring out how to fix the error.
- Simplify the code a bit at FS.newClient(), so it is easier to follow it now.
While at it, remove the check when superflouos environment variables are set, since it is too fragile
and it looks like it doesn't help properly configuring vmbackup / vmrestore.
- Remove envLookuper indirection - just use 'func(name string) (string, bool)' type inline.
This simplifies code reading and understanding.
- Split TestFSInit() into TestFSInit_Failure() and TestFSInit_Success(). This simplifies the test code,
so it should be easier to maintain in the future.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6518
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984
The %q formatter may result in incorrectly formatted JSON string if the original string
contains special chars such as \x1b . They must be encoded as \u001b , otherwise the resulting JSON string
cannot be parsed by JSON parsers.
This is a follow-up for c0caa69939
See https://github.com/VictoriaMetrics/victorialogs-datasource/issues/24
- Clarify the description of -graphite.sanitizeMetricName command-line flag at README.md
- Do not sanitize tag values - only metric names and tag names must be sanitized,
since they are treated specially by Grafana. Grafana doesn't apply any restrictions on tag values.
- Properly replace more than two consecutive dots with a single dot.
- Disallow unicode letters in metric names and tag names, since neither Prometheus nor Grafana
do not support them.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6489
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6077
`Storage.AddRows()` returns an error only in one case: when
`Storage.updatePerDateData()` fails to unmarshal a `metricNameRaw`. But
the same error is treated as a warning when it happens inside
`Storage.add()` or returned by `Storage.prefillNextIndexDB()`.
This commit fixes this inconsistency by treating the error returned by
`Storage.updatePerDateData()` as a warning as well. As a result
`Storage.add()` does not need a return value anymore and so doesn't
`Storage.AddRows()`.
Additionally, this commit adds a unit test that checks all cases that
result in a row not being added to the storage.
---------
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
- Obtain IAM token via GCE-like API instead of Amazon EC2 IMDSv2 API,
since it looks like IMDBSv2 API isn't supported by Yandex Cloud
according to https://yandex.cloud/en/docs/security/standard/authentication#aws-token :
> So far, Yandex Cloud does not support version 2, so it is strongly recommended
> to technically disable getting a service account token via the Amazon EC2 metadata service.
- Try obtaining IAM token via GCE-like API at first and then fall back to the deprecated Amazon EC2 IMDBSv1.
This should prevent from auth errors for instances with disabled GCE-like auth API.
This addresses @ITD27M01 concern at https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5513#issuecomment-1867794884
- Make more clear the description of the change at docs/CHANGELOG.md , add reference to the related issue.
P.S. This change wasn't tested in prod because I have no access to Yandex Cloud.
It is recommended to test this change by @ITD27M01 and @vmazgo , who filed
the issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5513
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6524
- Rename GetStatDialFunc to NewStatDialFunc, since it returns new function with every call
- NewStatDialFunc isn't related to http in any way, so it must be moved from lib/httputils to lib/netutil
- Simplify the implementation of NewStatDialFunc by removing sync.Map from there.
- Use netutil.NewStatDialFunc at app/vmauth and lib/promscrape/discoveryutils
- Use gauge instead of counter type for *_conns metric
This is a follow-up for d7b5062917
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6299
- Move the remaining code responsible for stream aggregation initialization from remotewrite.go to streamaggr.go .
This improves code maintainability a bit.
- Properly shut down streamaggr.Aggregators initialized inside remotewrite.CheckStreamAggrConfigs().
This prevents from potential resource leaks.
- Use separate functions for initializing and reloading of global stream aggregation and per-remoteWrite.url stream aggregation.
This makes the code easier to read and maintain. This also fixes INFO and ERROR logs emitted by these functions.
- Add an ability to specify `name` option in every stream aggregation config. This option is used as `name` label
in metrics exposed by stream aggregation at /metrics page. This simplifies investigation of the exposed metrics.
- Add `path` label additionally to `name`, `url` and `position` labels at metrics exposed by streaming aggregation.
This label should simplify investigation of the exposed metrics.
- Remove `match` and `group` labels from metrics exposed by streaming aggregation, since they have little practical applicability:
it is hard to use these labels in query filters and aggregation functions.
- Rename the metric `vm_streamaggr_flushed_samples_total` to less misleading `vm_streamaggr_output_samples_total` .
This metric shows the number of samples generated by the corresponding streaming aggregation rule.
This metric has been added in the commit 861852f262 .
See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6462
- Remove the metric `vm_streamaggr_stale_samples_total`, since it is unclear how it can be used in practice.
This metric has been added in the commit 861852f262 .
See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6462
- Remove Alias and aggrID fields from streamaggr.Options struct, since these fields aren't related to optional params,
which could modify the behaviour of the constructed streaming aggregator.
Convert the Alias field to regular argument passed to LoadFromFile() function, since this argument is mandatory.
- Pass Options arg to LoadFromFile() function by reference, since this structure is quite big.
This also allows passing nil instead of Options when default options are enough.
- Add `name`, `path`, `url` and `position` labels to `vm_streamaggr_dedup_state_size_bytes` and `vm_streamaggr_dedup_state_items_count` metrics,
so they have consistent set of labels comparing to the rest of streaming aggregation metrics.
- Convert aggregator.aggrStates field type from `map[string]aggrState` to `[]aggrOutput`, where `aggrOutput` contains the corresponding
`aggrState` plus all the related metrics (currently only `vm_streamaggr_output_samples_total` metric is exposed with the corresponding
`output` label per each configured output function). This simplifies and speeds up the code responsible for updating per-output
metrics. This is a follow-up for the commit 2eb1bc4f81 .
See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6604
- Added missing urls to docs ( https://docs.victoriametrics.com/stream-aggregation/ ) in error messages. These urls help users
figuring out why VictoriaMetrics or vmagent generates the corresponding error messages. The urls were removed for unknown reason
in the commit 2eb1bc4f81 .
- Fix incorrect update for `vm_streamaggr_output_samples_total` metric in flushCtx.appendSeriesWithExtraLabel() function.
While at it, reduce memory usage by limiting the maximum number of samples per flush to 10K.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5467
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6268
Pending rows and items unconditionally remain in memory for up to pending{Items,Rows}FlushInterval,
so there is no any sense in setting dataFlushInterval (the interval for guaranteed flush of in-memory data to disk)
to values smaller than pending{Items,Rows}FlushInterval, since this doesn't affect the interval
for flushing pending rows and items from memory to disk.
This is a follow-up for 4c80b17027
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6221
- Consistently enumerate stream aggregation outputs in alphabetical order across the source code and docs.
This should simplify future maintenance of the corresponding code and docs.
- Fix the link to `rate_sum()` at `see also` section of `rate_avg()` docs.
- Make more clear the docs for `rate_sum()` and `rate_avg()` outputs.
- Encapsulate output metric suffix inside rateAggrState. This eliminates possible bugs related
to incorrect suffix passing to newRateAggrState().
- Rename rateAggrState.total field to less misleading rateAggrState.increase name, since it calculates
counter increase in the current aggregation window.
- Set rateLastValueState.prevTimestamp on the first sample in time series instead of the second sample.
This makes more clear the code logic.
- Move the code for removing outdated entries at rateAggrState into removeOldEntries() function.
This make the code logic inside rateAggrState.flushState() more clear.
- Do not write output sample with zero value if there are no input series, which could be used
for calculating the rate, e.g. if only a single sample is registered for every input series.
- Do not take into account input series with a single registered sample when calculating rate_avg(),
since this leads to incorrect results.
- Move {rate,total}AggrState.flushState() function to the end of rate.go and total.go files, so they look more similar.
This shuld simplify future mantenance.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6243
- Drop samples and return true from remotewrite.TryPush() at fast path when all the remote storage
systems are configured with the disabled on-disk queue, every in-memory queue is full
and -remoteWrite.dropSamplesOnOverload is set to true. This case is quite common,
so it should be optimized. Previously additional CPU time was spent on per-remoteWriteCtx
relabeling and other processing in this case.
- Properly count the number of dropped samples inside remoteWriteCtx.pushInternalTrackDropped().
Previously dropped samples were counted only if -remoteWrite.dropSamplesOnOverload flag is set.
In reality, the samples are dropped when they couldn't be sent to the queue because in-memory queue is full
and on-disk queue is disabled.
The remoteWriteCtx.pushInternalTrackDropped() function is called by streaming aggregation for pushing
the aggregated data to the remote storage. Streaming aggregation cannot wait until the remote storage
processes pending data, so it drops aggregated samples in this case.
- Clarify the description for -remoteWrite.disableOnDiskQueue command-line flag at -help output,
so it is clear that this flag can be set individually per each -remoteWrite.url.
- Make the -remoteWrite.dropSamplesOnOverload flag global. If some of the remote storage systems
are configured with the disabled on-disk queue, then there is no sense in keeping samples
on some of these systems, while dropping samples on the remaining systems, since this
will result in global stall on the remote storage system with the disabled on-disk queue
and with the -remoteWrite.dropSamplesOnOverload=false flag. vmagent will always return false
from remotewrite.TryPush() in this case. This will result in infinite duplicate samples
written to the remaining remote storage systems. That's why the -remoteWrite.dropSamplesOnOverload
is forcibly set to true if more than one -remoteWrite.disableOnDiskQueue flag is set.
This allows proceeding with newly scraped / pushed samples by sending them to the remaining
remote storage systems, while dropping them on overloaded systems with the -remoteWrite.disableOnDiskQueue flag set.
- Verify that the remoteWriteCtx.TryPush() returns true in the TestRemoteWriteContext_TryPush_ImmutableTimeseries test.
- Mention in vmagent docs that the -remoteWrite.disableOnDiskQueue command-line flag can be set individually per each -remoteWrite.url.
See https://docs.victoriametrics.com/vmagent/#disabling-on-disk-persistence
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6248
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6065
This makes test code more clear and reduces the number of code lines by 500.
This also simplifies debugging tests. See https://itnext.io/f-tests-as-a-replacement-for-table-driven-tests-in-go-8814a8b19e9e
While at it, consistently use t.Fatal* instead of t.Error* across tests, since t.Error*
requires more boilerplate code, which can result in additional bugs inside tests.
While t.Error* allows writing logging errors for the same, this doesn't simplify fixing
broken tests most of the time.
This is a follow-up for a9525da8a4
We use `vm_streamaggr_flushed_samples_total` to show the number of
produced samples by aggregation rule, previously it was overcounted, and
doesn't account for `output_relabel_configs`.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6462
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 2eb1bc4f81)
### Describe Your Changes
These changes support using Azure Managed Identity for the `vmbackup`
utility. It adds two new environment variables:
* `AZURE_USE_DEFAULT_CREDENTIAL`: Instructs the `vmbackup` utility to
build a connection using the [Azure Default
Credential](https://pkg.go.dev/github.com/Azure/azure-sdk-for-go/sdk/azidentity@v1.5.2#NewDefaultAzureCredential)
mode. This causes the Azure SDK to check for a variety of environment
variables to try and make a connection. By default, it tries to use
managed identity if that is set up.
This will close
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Testing
However you normally test the `vmbackup` utility using Azure Blob should
continue to work without any changes. The set up for that is environment
specific and not listed out here.
Once regression testing has been done you can set up [Azure Managed
Identity](https://learn.microsoft.com/en-us/entra/identity/managed-identities-azure-resources/overview)
so your resource (AKS, VM, etc), can use that credential method. Once it
is set up, update your environment variables according to the updated
documentation.
I added unit tests to the `FS.Init` function, then made my changes, then
updated the unit tests to capture the new branches.
I tested this in our environment, but with SAS token auth and managed
identity and it works as expected.
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Justin Rush <jarush@epic.com>
Co-authored-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 5fd3aef549)
'any' type is supported starting from Go1.18. Let's consistently use it
instead of 'interface{}' type across the code base, since `any` is easier to read than 'interface{}'.
This makes easier to read and debug these tests. This also reduces test lines count by 15% from 3K to 2.5K .
See https://itnext.io/f-tests-as-a-replacement-for-table-driven-tests-in-go-8814a8b19e9e .
While at it, consistently use t.Fatal* instead of t.Error*, since t.Error* usually leads
to more complicated and fragile tests, while it doesn't bring any practical benefits over t.Fatal*.
