It should help identifying cases when too much CPU is spent on garbage collection,
and advice users on how this can be addressed.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The easyproto-based marshaler is 2x slower than the previous custom marshaler,
so let's stick with it. This improves the performance for sending data to remote storage at vmagent
and reduces CPU usage to pre-v1.97.0 levels.
* adding support for username_file in basic_auth of scrape config
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
* adding support for username_file in basic_auth of scrape config. See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5511
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
* adding support for username_file in basic_auth of scrape config
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
* adding support for username_file in basic_auth of scrape config
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
* adding support for username_file in basic_auth of scrape config
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
---------
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
This case is possible after a new brsPool is allocated. The fix is to verify whether len(brsPool) >= len(brs.brs)
before trying to append a new item to brsPool and sharing its contents with brs.brs.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5733
* app/vmselect: set proper timestamp for cached instant responses
The change updates `getSumInstantValues` to prefer timestamp
from the most recent results. Before, timestamp from cached series
was used.
The old behavior had negative impact on recording rules as they
were getting responses with shifted timestamps in past.
Subsequent recording or alerting rules fetching results of these
recording rules could get no result due to staleness interval.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5659
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This limit has little sense for these APIs, since:
- Thses APIs frequently result in scanning of all the time series on the given time range.
For example, if extra_filters={datacenter="some_dc"} .
- Users expect these APIs shouldn't hit the -search.maxUniqueTimeseries limit,
which is intended for limiting resource usage at /api/v1/query and /api/v1/query_range requests.
Also limit the concurrency for /api/v1/labels, /api/v1/label/.../values
and /api/v1/series requests in order to limit the maximum memory usage and CPU usage for these API.
This limit shouldn't affect typical use cases for these APIs:
- Grafana dashboard load when dashboard labels should be loaded
- Auto-suggestion list load when editing the query in Grafana or vmui
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5055
Sending unfinished aggregate states tend to produce unexpected anomalies with lower values than expected.
The old behavior can be restored by specifying `flush_on_shutdown: true` setting in streaming aggregation config
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmalert: fix data race during hot-config reload
During hot-reload, the logic evokes the group update and rules evaluation
interruption simultaneously. Falsely assuming that interruption happens before
the update. However, it could happen that group will be updated first and only
after the rules evaluation will be cancelled. Which will result in permanent
interruption for all rules within the group.
The fix caches the cancel context function into local variable first. And only after
performs the group update. With cached cancel function we can safely call it without
worrying that we cancel the evaluation for already updated group.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Revert "app/vmalert: fix data race during hot-config reload"
This reverts commit a4bb7e8932.
* app/vmalert: fix data race during hot-config reload
During hot-reload, the logic evokes the group update and rules evaluation
interruption simultaneously. Falsely assuming that interruption happens before
the update. However, it could happen that group will be updated first and only
after the rules evaluation will be cancelled. Which will result in permanent
interruption for all rules within the group.
The fix cancels the evaulation context before applying the update, making sure
that the context will be cancelled for old group always.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Maintain a separate worker pool per each part type (in-memory, file, big and small).
Previously a shared pool was used for merging all the part types.
A single merge worker could merge parts with mixed types at once. For example,
it could merge simultaneously an in-memory part plus a big file part.
Such a merge could take hours for big file part. During the duration of this merge
the in-memory part was pinned in memory and couldn't be persisted to disk
under the configured -inmemoryDataFlushInterval .
Another common issue, which could happen when parts with mixed types are merged,
is uncontrolled growth of in-memory parts or small parts when all the merge workers
were busy with merging big files. Such growth could lead to significant performance
degradataion for queries, since every query needs to check ever growing list of parts.
This could also slow down the registration of new time series, since VictoriaMetrics
searches for the internal series_id in the indexdb for every new time series.
The third issue is graceful shutdown duration, which could be very long when a background
merge is running on in-memory parts plus big file parts. This merge couldn't be interrupted,
since it merges in-memory parts.
A separate pool of merge workers per every part type elegantly resolves both issues:
- In-memory parts are merged to file-based parts in a timely manner, since the maximum
size of in-memory parts is limited.
- Long-running merges for big parts do not block merges for in-memory parts and small parts.
- Graceful shutdown duration is now limited by the time needed for flushing in-memory parts to files.
Merging for file parts is instantly canceled on graceful shutdown now.
- Deprecate -smallMergeConcurrency command-line flag, since the new background merge algorithm
should automatically self-tune according to the number of available CPU cores.
- Deprecate -finalMergeDelay command-line flag, since it wasn't working correctly.
It is better to run forced merge when needed - https://docs.victoriametrics.com/#forced-merge
- Tune the number of shards for pending rows and items before the data goes to in-memory parts
and becomes visible for search. This improves the maximum data ingestion rate and the maximum rate
for registration of new time series. This should reduce the duration of data ingestion slowdown
in VictoriaMetrics cluster on e.g. re-routing events, when some of vmstorage nodes become temporarily
unavailable.
- Prevent from possible "sync: WaitGroup misuse" panic on graceful shutdown.
This is a follow-up for fa566c68a6 .
Thanks @misutoth to for the inspiration at https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5212
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5190
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3790
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3551
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3337
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3425
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3647
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3641
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/648
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/291
* app/vmalert: autogenerate `ALERTS_FOR_STATE` time series for alerting rules with `for: 0`
Previously, `ALERTS_FOR_STATE` was generated only for alerts with `for > 0`.
This behavior differs from Prometheus behavior - it generates ALERTS_FOR_STATE
time series for alerting rules with `for: 0` as well. Such time series can
be useful for tracking the moment when alerting rule became active.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5648https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3056
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmalert: support ALERTS_FOR_STATE in `replay` mode
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This reverts cd4f641d32 , since it has been appeared that the disabled compression
for vmstorage->vmselect data increase network bandwidth usage by more than 10x on typical production workloads,
while it decreases CPU usage at vmstorage by up to 10% and improves query latency by up to 10%.
The 10x increase in network usage is too high price for 10% improvements on query latency and vmstorage CPU usage.
This may result in network bandwidth bottlenecks, which can reduce the overall performance and stability
of VictoriaMetrics cluster. That's why return back the vmstorage->vmselect data compression by default.
The vmstorage->vmselect compression can be disabled by passing -rpc.disableCompression command-line flag to vmstorage.
The vmselect->vmselect compression in multi-level cluster setup can be disabled by passing -clusternative.disableCompression command-line flag.
It has been appeared that the registration of new time series slows down linearly
with the number of indexdb parts, since VictoriaMetrics needs to check every indexdb part
when it searches for TSID by newly ingested metric name.
The number of in-memory parts grows when new time series are registered
at high rate. The number of in-memory parts grows faster on systems with big number
of CPU cores, because the mergeset maintains per-CPU buffers with newly added entries
for the indexdb, and every such entry is transformed eventually into a separate in-memory part.
The solution has been suggested in https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5212
by @misutoth - to limit the number of in-memory parts with buffered channel.
This solution is implemented in this commit. Additionally, this commit merges per-CPU parts
into a single part before adding it to the list of in-memory parts. This reduces CPU load
when searching for TSID by newly ingested metric name.
The https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5212 recommends setting the limit on the number
of in-memory parts to 100, but my internal testing shows that much lower limit 15 works with the same efficiency
on a system with 16 CPU cores while reducing memory usage for `indexdb/dataBlocks` cache by up to 50%.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5190
* lib/promscrape: respect `0` value for `series_limit` param
Respect `0` value for `series_limit` param in `scrape_config`
even if global limit was set via `-promscrape.seriesLimitPerTarget`.
Previously, `0` value will be ignored in favor of `-promscrape.seriesLimitPerTarget`.
This behavior aligns with possibility to override `series_limit` value via
relabeling with `__series_limit__` label.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Update docs/CHANGELOG.md
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* vmui: fix the logic of closing the popper #5470
* vmui: fix the logic of caching autocomplete results #5472
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Previously, it was not possible to determine which tenant sends metrics with excessive amount of labels of label values.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/promscrape/discovery/kubernetes: fix watcher start order for roles endpoints and endpointslice
Previously the groupWatcher could be mistakenly stopped when requests for pod or services resources take too long.
* remove mislead comment
* docs/sd_configs.md: mention -promscrape.kubernetes.attachNodeMetadataAll flag in the description for attach_metadata section
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4640
* wip
* lib/promscrape/kubernetes: prevent from stopping groupWatcher when there are in-flight apiWatcher.mustStart() calls
groupWatcher is stopped if it has zero registered apiWatchers during 14 seconds.
But such a groupWatcher can be still in use if apiWatcher for `role: endpoints` or `role: endpointslice`
is being registered and the discovery of the associated `pod` and/or `service` objects takes longer
than 14 seconds - see the beginning of groupWatcher.startWatchersForRole() function for details.
Track the number of in-flight calls to apiWatcher.mustStart() and prevent from stopping the associated groupWatcher
if the number of in-flight calls is non-zero.
P.S. postponing the discovery of `pod` and/or `service` objects associated with `endpoints` or `endpointslice` roles
isn't the best solution, since it slows down initial discovery of `endpoints` and `endpointslice` targets.
* typo fix
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Examples:
1) -metricsAuthKey=file:///abs/path/to/file - reads flag value from the given absolute filepath
2) -metricsAuthKey=file://./relative/path/to/file - reads flag value from the given relative filepath
3) -metricsAuthKey=http://some-host/some/path?query_arg=abc - reads flag value from the given url
The flag value is automatically updated when the file contents changes.
* app/vmauth: adds metric_labels and backend_errors counter
it must improve observability for user requests with new metric - per user backend errors counter.
it's needed to calculate requests fail rate to the configured backends.
metric_labels configuration allows to perform additional aggregations on top of multiple users from configuration section.
It could be multiple clients or clients with separate read/write tokens
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5565
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* app/vmselect/promql: properly handle possible negative results caused by float operations precision error in rollup functions like rate() or increase()
* fix test
- docs/sd_configs.md: moved hetzner_sd_configs docs to the correct place according to alphabetical order of SD names,
document missing __meta_hetzner_role label.
- lib/promscrape/config.go: added missing MustStop() call for Hetzner SD,
and moved the code to the correct place according to alphabetical order of SD names.
- lib/promscrape/discovery/hetzner: properly handle pagination for hloud API responses,
populate missing __meta_hetzner_role label like Prometheus does.
- Properly populate __meta_hetzner_public_ipv6_network label like Prometheus does.
- Remove unused SDConfig.Token.
- Remove "omitempty" annotation from SDConfig.Role field, since this field is mandatory.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5550
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3154
Properly determine time range search for instant queries with too big look-behind window like `foo[100y]`.
Previously, such queries could return empty responses even if `foo` is present in database.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5553
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Clarify the bugfix description at docs/CHANGELOG.md
- Simplify the code by accessing prefetchedMetricIDs struct under the lock
instead of using lockless access to immutable struct.
This shouldn't worsen code scalability too much on busy systems with many CPU cores,
since the code executed under the lock is quite small and fast.
This allows removing cloning of prefetchedMetricIDs struct every time
new metric names are pre-fetched. This should reduce load on Go GC,
since the cloning of uin64set.Set struct allocates many new objects.
Before, this cache was limited only by size.
Cache invalidation by time happens with jitter to prevent thundering herd problem.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
It was calculating the number of dropped time series instead of the number of dropped samples.
While at it, drop vmalert_remotewrite_dropped_bytes_total metric, since it was inconsistently calculated -
at one place it was calculating raw protobuf-encoded sample sizes, while at another place it was calculating
the size of snappy-compressed prompbmarshal.WriteRequest protobuf message.
Additionally, this metric has zero practical sense, so just drop it in order to reduce the level of confusion.
* add panels for detailed visualization of traffic usage between vmstorage, vminsert, vmselect
components and their clients. New panels are available in the rows dedicated to specific components.
* update "Slow Queries" panel to show percentage of the slow queries to the total number of read queries
served by vmselect. The percentage value should make it more clear for users whether there is a service degradation.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 463455665b)
automatically add `exported_` prefix for original evaluation result label if it's conflicted with external or reserved one,
previously it was overridden.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5161
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 1f477aba41)
The user may which to control the endpoint parameters for instance to
set the audience when requesting an access token. Exposing the
parameters as a map allows for additional use cases without requiring
modification.
* lib/awsapi: properly assume role with webIdentity token
introduce new irsaRoleArn param for config. It's only needed for authorization with webIdentity token.
First credentials obtained with irsa role and the next sts assume call for an actual roleArn made with those credentials.
Common use case for it - cross AWS accounts authorization
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3822
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Some clients may ingest samples via OpenTelemetry protocol without Resource labels.
Previously VictoriaMetrics was silently dropping such samples.
The commit 317834f876 added vm_protoparser_rows_dropped_total{type="opentelemetry",reason="resource_not_set"}
counter for tracking of such dropped samples. See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5459
It is better from usability PoV to accept such samples instead of dropping them and incrementing the corresponding counter.
Before, retries happened only on writes into a network connection
between source and destination. But errors returned by server after
all the data was transmitted were logged, but not retried.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 664fa5cb78)
Requests with wrong or no schema in `-external.url` could be rejected by alertmanager.
So we validate schema on start up.
(cherry picked from commit 9253c24dd6)
* vmui: add show quick tip for autocomplete
* vmui: auto-completion usability improvements #5348
* vmui: add const for min symbols in autocomplete
* Use proper queries to VictoriaMetrics
* vmui: fix comments for autocomplete
* app/vmselect: run `make vmui-update`
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Before, vmalert would send notifications with labels containing characters
not supported by Alertmanager validator, resulting into validation errors
like `msg="Failed to validate alerts" err="invalid label set: invalid name "foo.bar"`
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Previously the lower bound could be too small, which could result in missing values at the beginning of the graph
for default_rollup() function. This function is automatically applied to all the series selectors if they aren't
explicitly wrapped into a rollup function - see https://docs.victoriametrics.com/MetricsQL.html#implicit-query-conversions
While at it, properly take into account `-search.minStalenessInterval` command-line flag when adjusting
the lower bound for the selected time range.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5388
* vmagent: export `vm_promscrape_scrape_pool_targets` metric to track the number of targets that each scrape_job discovers
* add extra panel for new metric
* app/vmalert: expose `/vmalert/api/v1/rule` and `/api/v1/rule` API which returns rule status in JSON format
* app/vmalert: hide updates if query param not set
* app/vmalert: fix panic (recursion call)
* app/vmalert: add needed group name and file name
* app/vmalert: fix comment, update behavior
* app/vmalert: fix description
* app/vmalert: simplify API for /api/v1/rule
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmalert: simplify API for /api/v1/rule
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmalert: simplify API for /api/v1/rule
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmalert: simplify API for /api/v1/rule
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmalert: simplify API for /api/v1/rule
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
Previously concurrency for static and fast queries was limited with the -search.maxConcurrentRequests
command-line flag. This could complicate identifying heavy queries via `vmui` at `Top queries` and `Active queries` pages,
since `vmui` and these pages couldn't be opened on overloaded vmselect.
Thanks to @f41gh7 for the idea.
Previously the /service-discovery page didn't show targets dropped because of sharding
( https://docs.victoriametrics.com/vmagent.html#scraping-big-number-of-targets ).
Show also the reason why every target is dropped at /service-discovery page.
This should improve debuging why particular targets are dropped.
While at it, do not remove dropped targets from the list at /service-discovery page
until the total number of targets exceeds the limit passed to -promscrape.maxDroppedTargets .
Previously the list was cleaned up every 10 minutes from the entries, which weren't updated
for the last minute. This could complicate debugging of dropped targets.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5389
* lib/backup/s3remote: remove prev object versions for recursive delete
- fix error caused by sending empty objects list to be deleted. This was possible in case old versions of objects where deleted, but root-level entries where still available. This caused paginator to return an empty page which wasn't skipped.
- delete previous versions of objects recursively for S3 remote
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/changelog: add vmbackupmanager fix entry
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/backup/s3remote: unify path construction for S3 objects
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/streamaggr: properly reference slice with labels
by limiting slice capacity. It must fix issues with slice modification, in case of append new slice will be allocated, instead of modifying refrenced slice
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5402
* Reduce memory allocations when output_relabel_configs adds new labels to output samples
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
(cherry picked from commit 41f7940f97)
* prevent /api/v1 from panic on parsing rows
* add tests for Extract function for v1 and v2 api's
* separate request types in different pools to prevent different objects mixing
* add changelog line
543f218fe9
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 98d0f81f21)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Add Try* prefix to functions, which return bool result in order to improve readability and reduce the probability of missing check
for the result returned from these functions.
- Call the adjustSampleValues() only once on input samples. Previously it was called on every attempt to flush data to peristent queue.
- Properly restore the initial state of WriteRequest passed to tryPushWriteRequest() before returning from this function
after unsuccessful push to persistent queue. Previously a part of WriteRequest samples may be lost in such case.
- Add -remoteWrite.dropSamplesOnOverload command-line flag, which can be used for dropping incoming samples instead
of returning 429 Too Many Requests error to the client when -remoteWrite.disableOnDiskQueue is set and the remote storage
cannot keep up with the data ingestion rate.
- Add vmagent_remotewrite_samples_dropped_total metric, which counts the number of dropped samples.
- Add vmagent_remotewrite_push_failures_total metric, which counts the number of unsuccessful attempts to push
data to persistent queue when -remoteWrite.disableOnDiskQueue is set.
- Remove vmagent_remotewrite_aggregation_metrics_dropped_total and vm_promscrape_push_samples_dropped_total metrics,
because they are replaced with vmagent_remotewrite_samples_dropped_total metric.
- Update 'Disabling on-disk persistence' docs at docs/vmagent.md
- Update stale comments in the code
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5088
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2110
* app/vmagent: allow to disabled on-disk queue
Previously, it wasn't possible to build data processing pipeline with a
chain of vmagents. In case when remoteWrite for the last vmagent in the
chain wasn't accessible, it persisted data only when it has enough disk
capacity. If disk queue is full, it started to silently drop ingested
metrics.
New flags allows to disable on-disk persistent and immediatly return an
error if remoteWrite is not accessible anymore. It blocks any writes and
notify client, that data ingestion isn't possible.
Main use case for this feature - use external queue such as kafka for
data persistence.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2110
* adds test, updates readme
* apply review suggestions
* update docs for vmagent
* makes linter happy
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Tests showed that importing a single line with 70MB size takes 5.3GiB
RSS memory for VictoriaMetrics single-node.
In the scenario when user exports and imports data from one VM to another,
it could possibly lead to OOM exception for destination VM.
Importing a single line with 16MB size taks 1.3GiB RSS memory.
Hence, the limit for `import.maxLineLen` was decreased from 100MB to 10MB
to improve reliability of VictoriaMetrics during imports.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This case is possible after the following steps:
1. vmagent successfully performed handshake with the -remoteWrite.url and the remote storage supports zstd-compressed data.
2. remote storage became unavailable or slow to ingest data, vmagent compressed the collected data into blocks with zstd and puts these blocks to persistent queue on disk.
3. vmagent restarts and the remote storage is unavailable during the handshake, then vmagent falls back to Snappy compression.
4. vmagent starts sending zstd-compressed data from persistent queue to the remote storage, while falsely advertizing it sends Snappy-compressed data.
5. The remote storage receives zstd-compressed data and fails unpacking it with Snappy.
The solution is the same as 12cd32fd75, just fall back to zstd decompression if Snappy decompression fails.
The buffered connection could have exceeded the underlying connection
deadline during reading or writing to an internal buffer.
With this change, buffered connection struct additionally checks
for a deadline in Read/Write methods.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
evalRollupFuncNoCache() may return time series with identical labels (aka duplicate series)
when performing queries satisfying all the following conditions:
- It must select time series with multiple metric names. For example, {__name__=~"foo|bar"}
- The series selector must be wrapped into rollup function, which drops metric names. For example, rate({__name__=~"foo|bar"})
- The rollup function must be wrapped into aggregate function, which has no streaming optimization.
For example, quantile(0.9, rate({__name__=~"foo|bar"})
In this case VictoriaMetrics shouldn't return `cannot merge series: duplicate series found` error.
Instead, it should fall back to query execution with disabled cache.
Also properly store the merged results. Previously they were incorrectly stored because of a typo
introduced in the commit 41a0fdaf39
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5332
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5337
`version` label won't show the difference if various flavors of the same
version were deployed. But `short_version` will.
For example, on the sandbox env we test VM builds before new version release.
Without this change, the version update won't be visible on dashboard.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit d389a4fcf3)
* lib/querytracer: makes package concurrent safe to use
it must fix various issues with concurrent code usage.
Especially, when it's not reasonable to wait for all goroutines to be finished
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* app/vmstorage: close vminsert connections gradually before stopping storage
Implements graceful shutdown approach suggested here - https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4922#issuecomment-1768146878
Test results for this can be found here - https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4922#issuecomment-1790640274
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmstorage: update graceful shutdown logic
- close connections from vminsert in determenistic order
- update flag description
- lower default timeout to 25 seconds. 25 seconds value was chosen because the lowest default value used in default configuration deployments is 30s(default value in Kubernetes and ansible-playbooks).
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/cluster: add information about re-routing enhancement during restart
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/changelog: add entry for new command-line flag
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* {app/vmstorage,lib/ingestserver}: address review feedback
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/cluster: add note to update workload scheduler timeout
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* wip
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This case is possible after the following steps:
1. vmagent tries to perform handshake with the -remoteWrite.url in order to determine whether
the remote storage supports zstd-compressed data.
2. The remote storage is unavailable during the handshake. In this case vmagent falls back to Snappy compression
for the data sent to the remote storage.
3. vmagent compresses the collected data into blocks with Snappy and puts these blocks to persistent queue on disk.
4. The remote storage becomes available.
5. vmagent restarts, performs the handshake with the remote storage and detects that it supports zstd-compressed data.
6. vmagent starts sending Snappy-compressed data from persistent queue to the remote storage,
while falsely advertizing it sends zstd-compressed data.
7. The remote storage receives Snappy-compressed data and fails unpacking it with zstd.
The solution is to just fall back to Snappy decompression if zstd decompression fails.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5301
Previously the `Host` header was remained unchanged when passing it in requests to backends.
This may improperly work if the backend uses host-based routing.
While at it, allows http/2.0 requests to backends. While VictoriaMetrics components
do not accept http/2.0 requests, other backends can require such requests.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5240
- Re-use identically configured http.Transport across multiple users.
This fixes handling of the limit on the number of connection, which can be established per each backend
via -maxIdleConnsPerBackend command-line flag. This limit stopped working after 323f3720ed
- Add docs about backend TLS setup at https://docs.victoriametrics.com/vmauth.html#backend-tls-setup
- Add ability to disable backend TLS verification for all the users via -backend.tlsInsecureSkipVerify command-line flag.
This flag may be useful when -auth.config contains big number of users, and every user must disable backend TLS verification.
- Add ability to specify TLS Root CA via tls_ca_file option at per-user basis and via -backend.tlsCAFile command-line flag
across all the users.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5240
Previously entries which were accessed only 1 time weren't cached.
It has been appeared that some rarely executed heavy queries may read indexdb block twice
in a row instead of once. There is no need in caching such a block then.
This change should eliminate cache size spikes for indexdb/dataBlocks when such heavy queries are executed.
Expose -blockcache.missesBeforeCaching command-line flag, which can be used for fine-tuning
the number of cache misses needed before storing the block in the caching.
* app/vmalert: update remote-write process
* automatically retry remote-write requests on closed connections. The change should reduce the amount of logs produced in environments with short-living connections or environments without support of keep-alive on network balancers.
* increment `vmalert_remotewrite_errors_total` metric if all retries to send remote-write request failed. Before, this metric was incremented only if remote-write client's buffer is overloaded.
* increment `vmalert_remotewrite_dropped_rows_total` amd `vmalert_remotewrite_dropped_bytes_total` metrics if remote-write client's buffer is overloaded. Before, these metrics were incremented only after unsuccessful HTTP calls.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Update docs/CHANGELOG.md
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Hui Wang <haley@victoriametrics.com>
Add `tls_insecure_skip_verify` option on per-user basis which allows to disable TLS verification for all requests to backend on behalf of this user.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5240
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit 323f3720ed)
reduce the number of queries for restoring alerts state on start-up.
The change should speed up the restore process and reduce pressure on `remoteRead.url`.
(cherry picked from commit 90d45574bf)
* vmauth: add browser authorization request for http requests without credentials to a route that is not in the `unauthorized_user` section (when `unauthorized_user` is specified).
* add link to issue in CHANGELOG
* Extend vmauth docs
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Repeated instant queries with long lookbehind windows, which contain one of the following rollup functions,
are optimized via partial result caching:
- sum_over_time()
- count_over_time()
- avg_over_time()
- increase()
- rate()
The basic idea of optimization is to calculate
rf(m[d] @ t)
as
rf(m[offset] @ t) + rf(m[d] @ (t-offset)) - rf(m[offset] @ (t-d))
where rf(m[d] @ (t-offset)) is cached query result, which was calculated previously
The offset may be in the range of up to 1 hour.
The SECURITY label should be applied only to changes, which fix security issues.
The change at ad839aa492 adds new command-line flags, which can be used
for improving security in some cases. They do not fix any security issues.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5111
The new metric gets increased each time `-search.logQueryMemoryUsage` memory limit
is exceeded by a query. This metric should help to identify expensive and heavy queries
without inspecting the logs.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The new panel supposed to indicate alerting groups that miss their evaluations.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit aaf9e3d526)
The new rule for vmalert supposed to detect groups that miss their
evaulations due to slow queries.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 9866974a53)
The panel `Errors rate to Alertmanager` had `group` label filter
applied to the expression, while the metric `vmalert_alerts_send_errors_total`
doesn't have that label. This resulted into always empty results.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 8874b525b7)
fix possible missing firing states for alerting rules in replay mode
Before if one firing stage is bigger than single query request range, like rule with a big `for`, alerting rule won't able to be detected as firing.
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit abcb21aa5e)
support `Strict-Transport-Security`, `Content-Security-Policy` and `X-Frame-Options`
HTTP headers in all VictoriaMetrics components.
The values for headers can be specified by users via the following flags:
`-http.header.hsts`, `-http.header.csp` and `-http.header.frameOptions`.
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit ad839aa492)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Previously url watchers for pod, service and node objects could be mistakenly closed
when service discovery was set up only for endpoints and endpointslice roles,
since watchers for these roles may start start pod, service and node url watchers
with nil apiWatcher passed to groupWatcher.startWatchersForRole().
Now all the url watchers, which belong to a particular groupWatcher, are stopped at once
when this groupWatcher has no apiWatcher subscribers.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5216
The issue has been introduced in v1.93.5 when addressing https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4850
* do not print redundant error logs when failed to scrape consul or nomad target
prometheus performs the same because it uses consul lib which just drops the error(1806bcb38c/api/api.go (L1134))
- Make sure that invalid/missing TLS CA file or TLS client certificate files at vmagent startup
don't prevent from processing the corresponding scrape targets after the file becomes correct,
without the need to restart vmagent.
Previously scrape targets with invalid TLS CA file or TLS client certificate files
were permanently dropped after the first attempt to initialize them, and they didn't
appear until the next vmagent reload or the next change in other places of the loaded scrape configs.
- Make sure that TLS CA is properly re-loaded from file after it changes without the need to restart vmagent.
Previously the old TLS CA was used until vmagent restart.
- Properly handle errors during http request creation for the second attempt to send data to remote system
at vmagent and vmalert. Previously failed request creation could result in nil pointer dereferencing,
since the returned request is nil on error.
- Add more context to the logged error during AWS sigv4 request signing before sending the data to -remoteWrite.url at vmagent.
Previously it could miss details on the source of the request.
- Do not create a new HTTP client per second when generating OAuth2 token needed to put in Authorization header
of every http request issued by vmagent during service discovery or target scraping.
Re-use the HTTP client instead until the corresponding scrape config changes.
- Cache error at lib/promauth.Config.GetAuthHeader() in the same way as the auth header is cached,
e.g. the error is cached for a second now. This should reduce load on CPU and OAuth2 server
when auth header cannot be obtained because of temporary error.
- Share tls.Config.GetClientCertificate function among multiple scrape targets with the same tls_config.
Cache the loaded certificate and the error for one second. This should significantly reduce CPU load
when scraping big number of targets with the same tls_config.
- Allow loading TLS certificates from HTTP and HTTPs urls by specifying these urls at `tls_config->cert_file` and `tls_config->key_file`.
- Improve test coverage at lib/promauth
- Skip unreachable or invalid files specified at `scrape_config_files` during vmagent startup, since these files may become valid later.
Previously vmagent was exitting in this case.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959
* app/vmselect: limit the number of parallel workers by 32
The change should improve performance and memory usage during query processing
on machines with big number of CPU cores. The number of parallel workers for
query processing is controlled via `-search.maxWorkersPerQuery` command-line flag.
By default, the number of workers is limited by the number of available CPU cores,
but not more than 32. The limit can be increased via `-search.maxWorkersPerQuery`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
- The `-search.maxWorkersPerQuery` command-line flag doesn't limit resource usage,
so move it from the `resource usage limits` to `troubleshooting` chapter at docs/Single-server-VictoriaMetrics.md
- Make more clear the description for the `-search.maxWorkersPerQuery` command-line flag
- Add the description of `-search.maxWorkersPerQuery` to docs/Cluster-VictoriaMetrics.md
- Limit the maximum value, which can be passed to `-search.maxWorkersPerQuery`, to GOMAXPROCS,
because bigger values may worsen query performance and increase CPU usage
- Improve the the description of the change at docs/CHANGELOG.md. Mark it as FEATURE instead of BUGFIX,
since it is closer to a feature than to a bugfix.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5087
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* fix inconsistent behaviors with prometheus when scraping
1. address https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959. skip job with wrong syntax in `scrape_configs` with error logs instead of exiting;
2. show error messages on vmagent /targets ui if there are wrong auth configs in `scrape_configs`, previously will print error logs and do scrape without auth header;
3. don't send requests if there are wrong auth configs in:
1. vmagent remoteWrite;
2. vmalert datasource/remoteRead/remoteWrite/notifier.
* add changelogs
* address review comments
* fix ut
c9375cac5e
Descriptions were updated in attempt to make it more clear for readers,
re-phrasing and linking missing docs.
`eval_delay` was added to tests to verify it can be unmarshalled.
`eval_delay` is now applied before timestamp alignment to make it more predictable.
Before, if delay < interval the timestamp won't be aligned.
`eval_delay` and `eval_offset` was added to API output.
`PreviouslySentSeriesToRW` converted to private `previouslySentSeriesToRW`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit a216fe6728)
Using `min_over_time` should reduce the amount of false positives when
component is running in near-the-threshold state. Now it should trigger
only if all collected samples were above the threshold on 10m interval.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 003ef3a518)
This can be useful in the following queries:
drop_empty_series(temperature <= 30) default 40
This query drops temperature series with all the values bigger than 30 on the selected time range,
while replacing gaps in the remaining series with 40.
The query without drop_empty_series:
(temperature <= 30) default 40
would leave all the temperature series with all the values bigger than 30 on the selected time range,
and replace all their values with 40. This is not what could be epxected in some cases
like here - https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5071
* fixed error when creating a full backup using the `-origin` flag (#5144)
* Update docs/CHANGELOG.md
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Reduce vertical space usage, so more information is available on the screen without the need to scroll.
- Show information for lines with higher values at the top of the legend under the graph.
This should simplify graph analysis when it contains many lines.
Fix vminsert/vmstorage/vmselect metrics filtering when dashboard is used
to display data from many sub-clusters with unique job names.
Before, only one specific job could have been accounted for component-specific panels,
instead of all available jobs for the component.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
reduce lock contention for heavy aggregation requests
previously lock contetion may happen on machine with big number of CPU due to enabled string interning. sync.Map was a choke point for all aggregation requests.
Now instead of interning, new string is created. It may increase CPU and memory usage for some cases.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5087
* vmalert: add `query_time_alignment` for rule group
1. add `eval_alignment` attribute for group which by default is true. So group rule query stamp will be aligned with interval and propagated to ALERT metrics and the messages for alertmanager;
2. deprecate `datasource.queryTimeAlignment` flag.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5049
(cherry picked from commit 2aa0f5fc41)
Strip sensitive information such as auth headers or passwords from datasource, remote-read,
remote-write or notifier URLs in log messages or UI. This behavior is by default and is controlled via
`-datasource.showURL`, `-remoteRead.showURL`, `remoteWrite.showURL` or `-notifier.showURL` cmd-line flags.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5044
(cherry picked from commit 244c887825)
* lib/promscrape: make concurrency control optional
Before, `-maxConcurrentInserts` was limiting all calls to `promscrape.Parse`
function: during ingestion and scraping. This behavior is incorrect.
Cmd-line flag `-maxConcurrentInserts` should have effect onl on ingestion.
Since both pipelines use the same `promscrape.Parse` function, we extend it
to make concurrency limiter optional. So caller can decide whether concurrency
should be limited or not.
This commit makes c53b5788b4
obsolete.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Revert "dashboards: move `Concurrent inserts` panel to Troubleshooting section"
This reverts commit c53b5788b4.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/promscrape: add metric `vm_promscrape_scrapes_skipped_total`
add metric `vm_promscrape_scrapes_skipped_total`to show whether vmagent skips the scrapes.
This could happen if vmagent is overloaded or target is responding too slow for configured `scrape_interval`.
The follow-up commit should add a corresponding alerting rule and panel to vmagent dashboard.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* deployment/docker: add `TooManyScrapeSkips` alerting rule for vmagent
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: add panels `Scrape duration 0.99 quantile` and `Skipped scrapes` to vmagent dashboard
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmui: update information about tsdb usage in cluster version
* vmui: cleanup
* vmui: add CHANGELOG.md
* vmui: cleanup
* vmui: update logic, move information to the visible place
* app/vmui: remove values fetch, update documentation for cardinality explorer
* app/vmui: update CHANGELOG.md
Moved because this panel is related to both: scraped and ingested data.
Before, it could have give a misleading impression that it is related to ingested metrics only.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docker-compose: add vmauth to cluster env
vmauth acts as a balancer and used as an example of how to interconnect
VM components via vmauth.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docker-compose: add vmauth to cluster env
vmauth acts as a balancer and used as an example of how to interconnect
VM components via vmauth.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
`median_over_time` is handled by predefined WITH template in MetricsQL library which translates it to `quantile_over_time(0.5)`
This makes it impossble to use `median_over_time` as a usual rollup function for `aggr_over_time`.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5034
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
lib/promscrape/discovery/kubernetes: supress context.Cancelled error in logs
It is possible that context.Cancelled will appear after k8s watcher was closed due to reload(see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4850).
Logging an error misinforms user and looks like vmagent discovery will stop working even though this does not affect discovery.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit 8d99c12a7d)
* lib/backup: fix issue with inconsistent copying of appliedRetention.txt
appliedRetention.txt can be modified in place, so it should be always copied just the same as parts.json
Updates: https://github.com/victoriaMetrics/victoriaMetrics/issues/5005
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs: add changelog entry for appliedRetention.txt copying fix
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* expose metrics `vmauth_config_last_reload_*` for tracking the state of config reloads, similarly to vmagent/vmalert components.
* do not print logs like `SIGHUP received...` once per configured `-configCheckInterval` cmd-line flag. This log will be printed only if config reload was invoked manually.
* prevent configuration reloading if there were no changes in config. This improves memory usage when `-configCheckInterval` cmd-line flag is configured and config has extensive list of regexp expressions requiring additional memory on parsing.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Move the bugfix description to the correct place in docs/CHANGELOG.md
- Prevent from logging of 'context canceled' errors after the url watcher is stopped,
since these errors are expected and may confuse users.
- Remove unused urlWatcher.refCount field.
- Remove unused urlWatcher.close() method.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4850
* lib/promscrape/discovery/kubernetes: fix leaking api watcher
goroutine which was polling k8s API had no execution control. This leaded to leaking goroutines during config reload.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4850
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape/discovery/kubernetes: use reference counting for urlWatcher cleanup
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape/discovery/kubernetes: remove waitgroup sync for goroutines polling API server
This is unnecessary since context will is cancelled and new requests will not be sent. Also, using waitgroup will increase time required to perform reload which might result in missed scrapes.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape/discovery/kubernetes: clarify comment
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Apply suggestions from code review
* lib/promscrape/discovery/kubernetes: address review feedback
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
* lib/backup: force copying of parts.json
Copying of parts.json is required because `part.key()` comparison can create same key value for files with different contents. This will result in inconsistent backup being created or restored.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5005
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/backup: ensure parts.json is only copied once
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
This should prevent from emitting too long lines when too long args are passed to logger.* functions.
For example, too long MetricsQL queries or too long data samples.
Adds `eval_offset` attribute for Groups.
If specified, Group will be evaluated at the exact time offset on the range of [0...evaluationInterval].
The setting might be useful for cron-like rules which must be evaluated at specific moments of time.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3409
Signed-off-by: Haley Wang <pipilong.25@gmail.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 45c0e4bb31)
* lib/vmselectapi: do not send empty label names for labelNames request
it breaks cluster communication, since vmselect incorrectly reads request buffer, leaving unread data on it
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4932
* typo fix
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* app/vminsert: properly close vmstorage connection
previously vmstorage may stuck in broken state until vminsert restarts
since vmstorage was marked as read-only and connection was broken to it.
checkReadonly function never marked connection as broken
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4870
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* feat: add cardinality support for prometheus (#4320)
* docs/CHANGELOG.md: add cardinality support for prometheus
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* added ability to set and clear response headers (#4825)
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* added ability to set and clear response headers (#4825)
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fix review comment
Signed-off-by: Alexander Marshalov <_@marshalov.org>
---------
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* app/vminsert: fixes readonly check
previously vminsert doesn't check readOnly state for vmstorage, since check was never performed for nil buffer
In this case every 30 second storage node loss readonly state and received some data.
It caused re-routing and possible slow down for ingestion
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4870
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
app/vmselect: fix panic when using `/select/multitenant` endpoint
Such requests must be rejected as not found since vmselect does not support multitenant endpoint.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4910
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* deployment/docker: disable provenance in buildx
it must fix an issue with multi-platform manifest generation
at buildx >= 0.10 backward compatibility was broken and generated image cannot be used with docker systems that doesn't support oci.
disabling attestat temporary fixes it.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4907https://docs.docker.com/build/attestations/slsa-provenance/
* Update docs/CHANGELOG.md
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Document the change at docs/CHANGELOG.md
- Set the default value for -vmstorageUserTimeout to 3 seconds. This is much better
than the 0 value, which means that TCP connection to unreachable vmstorage could block
for up to 16 minutes.
- Document -vmstorageUserTimeout at docs/Cluster-VictoriaMetrics.md
Initially, stream parse mode was reading data from response and parsing it on flight. This was causing longer delay to read the whole response and required increasing timeout value to allow data processing while reading. So that 908e35affd increased timeout value to fix this.
But after 74c00a8762 response in stream parse mode is saved into memory and then parsed eliminating necessity of having timeout value higher that for usual scrape.
Updates: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4847
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit 6e8611f301)
* vmagent: retry failed write request on the closed connection
Retry failed write request on the closed connection immediately,
without waiting for backoff. This should improve data delivery speed
and reduce amount of error logs emitted by vmagent when using idle connections.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4139
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmagent: retry failed write request on the closed connection
Re-instantinate request before retry as body could have been already spoiled.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
(cherry picked from commit 992a1c0a3a)
* vmalert: correctly re-instantinate HTTP req on retries
Previosly, request retry to datasource re-used existing HTTP request.
But if request object was already partially processed (body was read),
then retry will be unsuccessful.
The change re-instantinates HTTP request object before retry.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: review fix
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit ddf87b32ed)
* Add button to prettify query
Just capitalizes query text for now
* Add /prettify-query API handler
* Replace UI pretiffier using prettifier API
* Add showing server errors
Had to pass setQueryErrors from useFetchQuery.ts
* Use serverUrl from global AppState
* Change icon to AutoAwsome icon + added style change color when button is active
* Add sync/await to prettifyQuery function
* Doc public function for lint
* Minor async fix
* Removed extra blank lines
* Extract usePrettifyQuery hook
* Made more generic style for :active button
* Refactor usePrettifyQuery
However, prettify errors don't clean up query errors, but should
* Add prettyQuery functionality to CHANGELOG.md
* Reuse queryErrors
* Unhide errors on start
---------
Co-authored-by: Tamara <toma.vashchuk@gmail.com>
(cherry picked from commit 7349f18c55)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
app/vmctl: don't interrupt migration process if tenant has no data
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Alexander Marshalov <_@marshalov.org>
(cherry picked from commit 39623ae428)
vmagent: properly add extra labels before sending data to remote storage
labels from `remoteWrite.label` are now added to sent metrics just before they
are pushed to `remoteWrite.url` after all relabelings, including stream aggregation relabelings (#4247)
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4247
Signed-off-by: Alexander Marshalov <_@marshalov.org>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit a27c2f3773)
Fix display of ingested rows rate for `Samples ingested/s`
and `Samples rate` panels for vmagent's dasbhoard.
Previously, not all ingested protocols were accounted in these panels.
An extra panel `Rows rate` was added to `Ingestion` section to display the split
for rows ingested rate by protocol.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 481a2c70fd)
Opentelemetry format allows histograms with non-counter buckets. In this case it makes no sense to add buckets into database
and save only counter with _count suffix.
It could be used as gauge.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4814
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/promrelabel: fix relabeling if clause being applied to labels outside of current context
Relabeling is applied to each metric row separately, but in order to lower amount of memory allocations it is reusing labels.
Functions which are working on current metric row labels are supposed to use only current metric labels by using provided offset, but if clause matcher was using the whole labels set instead of local metrics.
This leaded to invalid relabeling results such as one described here: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4806
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/CHANGELOG.md: document the bugfix
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1998
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4806
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
{vmagent/remotewrite,vminsert/common}: fix dropInput and keepInput flags inconsistency
Sync behavior for dropInput and keepInput flags between single-node and vmagent.
Fix vmagent not respecting dropInput flag and reverse logic for keepInput.
* rename `configErr` to `lastConfigErr` to reduce confusion
* add tests to verify metrics and msg are set properly
* fix mistake when config success metric wasn't restored after an error
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Correctly calculate `Bytes per point` value for single-server and cluster VM dashboards.
Before, the calculation mistakenly accounted for the number of entries in indexdb in
denominator, which could have shown lower values than expected.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
