Improperly configured -bigMergeConcurrency command-line flag usually leads to uncontrolled
growth of unmerged parts, which, in turn, increases CPU usage and query durations.
So it is better deprecating this flag. In rare cases -smallMergeConcurrency command-line flag
can be used instead for controlling the concurrency of background merges.
- Sync the description for -httpListenAddr.useProxyProtocol command-line flag at vmagent and vmauth,
so it is consistent with the description at vmauth and victoria-metrics
- Add a sample of panic text to docs/CHANGELOG.md, so it could be googled
- Mention the -httpListenAddr.useProxyProtocol command-line flag in the description for the bugfix
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3335
* {lib/server, app/}: use `httpAuth.*` flag as fallback for `*AuthKey` if it is not set
* lib/ingestserver/opentsdbhttp: fix opentdb HTTP handler not respecting `httpAuth.*` flags
* Apply suggestions from code review
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Previously the -maxConcurrentInserts was limiting the number of established client connections,
which write data to VictoriaMetrics. Some of these connections could be idle.
Such connections do not consume big amounts of CPU and RAM, so there is a little sense in limiting
the number of such connections. So now the -maxConcurrentInserts command-line option
limits the number of concurrently executed insert requests, not including idle connections.
It is recommended removing -maxConcurrentInserts command-line option, since the default value
for this option should work good for most cases.
This fixes handling of values bigger than 2GiB for the following command-line flags:
- -storage.minFreeDiskSpaceBytes
- -remoteWrite.maxDiskUsagePerURL
Blocked small merges may result into big number of small parts, which, in turn,
may result in increased CPU and memory usage during queries, since queries need to inspect
all the existing small parts.
The issue has been introduced in 8189770c50
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3337
The main purpose of this command-line flag is to increase the lifetime of low-end flash storage
with the limited number of write operations it can perform. Such flash storage is usually
installed on Raspberry PI or similar appliances.
For example, `-inmemoryDataFlushInterval=1h` reduces the frequency of disk write operations
to up to once per hour if the ingested one-hour worth of data fits the limit for in-memory data.
The in-memory data is searchable in the same way as the data stored on disk.
VictoriaMetrics automatically flushes the in-memory data to disk on graceful shutdown via SIGINT signal.
The in-memory data is lost on unclean shutdown (hardware power loss, OOM crash, SIGKILL).
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3337
The searchTSIDs function was searching for metricIDs matching the the given tag filters
and then was locating the corresponding TSID entries for the found metricIDs.
The TSID entries aren't needed when searching for time series names (aka MetricName),
so this commit removes the uneeded TSID search from the implementation of /api/v1/series API.
This improves perfromance of /api/v1/series calls.
This commit also improves performance a bit for /api/v1/query and /api/v1/query_range calls,
since now these calls cache small metricIDs instead of big TSID entries
in the indexdb/tagFilters cache (now this cache is named indexdb/tagFiltersToMetricIDs)
without the need to compress the saved entries in order to save cache space.
This commit also removes concurrency limiter during searching for matching time series,
which was introduced in 8f16388428, since the concurrency
for all the read queries is already limited with -search.maxConcurrentRequests command-line flag.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/648
These metrics allow alerting when the number of unique series approach the limit.
For example, the following query alerts when the number of series reaches 90% of the configured limit:
vm_hourly_series_limit_current_series / vm_hourly_series_limit_max_series > 0.9
The default size of `indexdb/tagFilters` now can be overridden via
`storage.cacheSizeIndexDBTagFilters` flag.
Please, be careful with changing default size since it may
lead to inefficient work of the vmstorage or OOM exceptions.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2663
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
* lib/{storage,flagutil} - Add option for snapshot autoremoval
- add prometheus-like duration as command flag
- add option to delete stale snapshots
- update duration.go flag to re-use own code
* wip
* lib/flagutil: re-use Duration.Set() call in NewDuration
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/{storage,regexpcache}: replaces regexpCacheMap with LRU cache
It should decrease memory usage for regexp caching
with storing cacheEntry by pointer - golang map should be able to effectivly shrink it's size
original issue with this case - unexpected map grows and storage OOM
Apply suggestions from code review
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Adds missing metrics for regexp cache and regexpPrefixes cache
* wip
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/index: reduce read/write load after indexDB rotation
IndexDB in VM is responsible for storing TSID - ID's used for identifying
time series. The index is stored on disk and used by both ingestion and read path.
IndexDB is stored separately to data parts and is global for all stored data.
It can't be deleted partially as VM deletes data parts. Instead, indexDB is
rotated once in `retention` interval.
The rotation procedure means that `current` indexDB becomes `previous`,
and new freshly created indexDB struct becomes `current`. So in any time,
VM holds indexDB for current and previous retention periods.
When time series is ingested or queried, VM checks if its TSID is present
in `current` indexDB. If it is missing, it checks the `previous` indexDB.
If TSID was found, it gets copied to the `current` indexDB. In this way
`current` indexDB stores only series which were active during the retention
period.
To improve indexDB lookups, VM uses a cache layer called `tsidCache`. Both
write and read path consult `tsidCache` and on miss the relad lookup happens.
When rotation happens, VM resets the `tsidCache`. This is needed for ingestion
path to trigger `current` indexDB re-population. Since index re-population
requires additional resources, every index rotation event may cause some extra
load on CPU and disk. While it may be unnoticeable for most of the cases,
for systems with very high number of unique series each rotation may lead
to performance degradation for some period of time.
This PR makes an attempt to smooth out resource usage after the rotation.
The changes are following:
1. `tsidCache` is no longer reset after the rotation;
2. Instead, each entry in `tsidCache` gains a notion of indexDB to which
they belong;
3. On ingestion path after the rotation we check if requested TSID was
found in `tsidCache`. Then we have 3 branches:
3.1 Fast path. It was found, and belongs to the `current` indexDB. Return TSID.
3.2 Slow path. It wasn't found, so we generate it from scratch,
add to `current` indexDB, add it to `tsidCache`.
3.3 Smooth path. It was found but does not belong to the `current` indexDB.
In this case, we add it to the `current` indexDB with some probability.
The probability is based on time passed since the last rotation with some threshold.
The more time has passed since rotation the higher is chance to re-populate `current` indexDB.
The default re-population interval in this PR is set to `1h`, during which entries from
`previous` index supposed to slowly re-populate `current` index.
The new metric `vm_timeseries_repopulated_total` was added to identify how many TSIDs
were moved from `previous` indexDB to the `current` indexDB. This metric supposed to
grow only during the first `1h` after the last rotation.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Previously these caches could exceed limits set via `-memory.allowedPercent` and/or `-memory.allowedBytes`,
since limits were set independently per each data part. If the number of data parts was big, then limits could be exceeded,
which could result to out of memory errors.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2007
The vm_cache_size_max_bytes metric can be used for determining caches which reach their capacity via the following query:
vm_cache_size_bytes / vm_cache_size_max_bytes > 0.9
* adds read-only mode for vmstorage
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/269
* changes order a bit
* moves isFreeDiskLimitReached var to storage struct
renames functions to be consistent
change protoparser api - with optional storage limit check for given openned storage
* renames freeSpaceLimit to ReadOnly
This option can be useful when samples for the same time series are ingested with distinct order of labels.
For example, metric{k1="v1",k2="v2"} and metric{k2="v2",k1="v1"}.
