After adding multitenant query feature at v1.104.0, searchQuery wasn't
properly unmarshalled at bottom vmselect in multi-level cluster setup.
It resulted into empty query responses.
This commit adds fallback to Unmarshal method of SearchQuery to fill
TenantTokens. It allows to properly execute search requests
at vmselect side.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7270
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Previously unit `m` is not correctly supported.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
If a dict flag has only one value without a prefix it is supposed to
replace default value.
Previously, when flag was set to `-flag=2` and the default value in
`NewDictInt` was set to 1 the resulting value for any `flag.Get()` call
would be 1 which is not expected.
This commit updates default value for the flag in case there is only one
entry for flag and the entry is a number without a key.
This affects cluster version and specifically `replicationFactor` flag
usage with vmstorage [node
groups](https://docs.victoriametrics.com/cluster-victoriametrics/#vmstorage-groups-at-vmselect).
Previously, the following configuration would effectively be ignored:
```
/path/to/vmselect \
-replicationFactor=2 \
-storageNode=g1/host1,g1/host2,g1/host3 \
-storageNode=g2/host4,g2/host5,g2/host6 \
-storageNode=g3/host7,g3/host8,g3/host9
```
Changes from this PR will force default value for `replicationFactor`
flag to be set to `2` which is expected as the result of this
configuration.
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
address https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6970.
This reduces the hard limit on duration for completing the test when
users run vmalert-tool on slow hosts.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
Previously it was incorrectly used append for pre-allocated slice of labels.
This commit fixes slice append by allocating zero length slice with needed capacity.
---------
Co-authored-by: Nikolay <nik@victoriametrics.com>
### Describe Your Changes
Fix `Alert` component to prevent it from overflowing the screen when
displaying long messages.
Related issue: #7207
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
- Added functionality to cancel running queries on the Explore Logs and
Query pages.
- The loader was changed from a spinner to a top bar within the block.
This still indicates loading, but solves the issue of the spinner
"flickering," especially during graph dragging.
Related issue: #7097https://github.com/user-attachments/assets/98e59aeb-905b-4b9d-bbb2-688223b22a82
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Some IDPs encode scope as a slice of strings. Handle this gracefully by encoding a slice back to string.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit f61d8c3ebb)
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
added opentelemetry exponential histograms support. Such histograms are automatically converted into
VictoriaMetrics histogram with `vmrange` buckets.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
This PR adds the feature to parse a multi yaml doc following the
`\n---\n`
The issue is
[6753](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6753)
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: kirti purohit <kirti.purohit@hpe.com>
Co-authored-by: kirti purohit <kirti.purohit@hpe.com>
Co-authored-by: Jiekun <jiekun@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
Currently, vmagent always uses a separate `http.Client` for every group
watcher in Kubernetes SD. With a high number of group watchers this
leads to large amount of opened connections.
This PR adds 2 changes to address this:
- re-use of existing `http.Client` - in case `http.Client` is connecting
to the same API server and uses the same parameters it will be re-used
between group watchers
- HTTP2 support - this allows to reuse connections more efficiently due
to ability of using streaming via existing connections.
See this issue for the details and test results -
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5971
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
### Describe Your Changes
Add darwin `amd64` and `arm64` builds for cluster binaries build.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit b9115d6882)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Added ability to query data across multiple tenants. See:
VictoriaMetrics/VictoriaMetrics#1434
Currently, the following endpoints work with multi-tenancy:
- /prometheus/api/v1/query
- /prometheus/api/v1/query_range
- /prometheus/api/v1/series
- /prometheus/api/v1/labels
- /prometheus/api/v1/label/<label_name>/values
- /prometheus/api/v1/status/active_queries
- /prometheus/api/v1/status/top_queries
- /prometheus/api/v1/status/tsdb
- /prometheus/api/v1/export
- /prometheus/api/v1/export/csv
- /vmui
A note regarding VMUI: endpoints such as `active_queries` and
`top_queries` have been updated to indicate whether query was a
single-tenant or multi-tenant, but UI needs to be updated to display
this info.
cc: @Loori-R
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: f41gh7 <nik@victoriametrics.com>
* Replaces deprecated graphs with Timeseries panels
* Adds new latency dashboards for rest client and golang scheduler
* Adds new overview panels
* Adds VM Datasource version of dashboard
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
When ingesting samples with the same labels(duplicated samples or
samples with the same labels after `by` or `without` options). They
could register different entries for the same labelset in
LabelsCompressor.
For example, both index 99 and 100 can be assigned to label `foo=1` in
two concurrent pushes. Then due to differing label indexes in encoded
keys, the samples will appear as distinct in aggrState, resulting in
duplicated results after decompressing the label indexes.
fbde238cdc/lib/streamaggr/streamaggr.go (L933)
In this pull request, since we need to store `idxToLabel` first to
ensure the idx can be searched after `lc.labelToIdxStore`,
the `lc.idxToLabel` still could contain a duplicated entries
[100]="foo=1". But given the low likelihood of this issue and the size
of idxToLabel, it should be fine.
### Describe Your Changes
Introduce the `-search.maxDeleteSeries` flag that limits the number of
time series that can be deleted with a single
`/api/v1/admin/tsdb/delete_series` call.
Currently, any number can be deleted and if the number is big (millions)
then the operation may result in unaccounted CPU and memory usage spikes
which in some cases may result in OOM kill (see #7027). The flag limits
the number to 30k by default and the users may override it if needed at
the vmstorage start time.
---------
Signed-off-by: Artem Fetishev <rtm@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
Previous commit 201fd6de1e removed
trailing space trim from data read from file. But common practice is to
remove such trailing space. And it leaded to the authorization errors
for the major group of users.
In first place, this change must help to mitigate an issue with
kubernetes. When authorization information was read from Secret content.
Changes to the operator was made to mitigate such problem at commit
1cf64358c8
We could introduce later optional flag for VictoriaMetrics to disable
trim space behavior.
Related issues:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6986https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7089https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6947
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Zhu Jiekun <jiekun@victoriametrics.com>
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: Artem Navoiev <tenmozes@gmail.com>
….url` using `-remoteWrite.streamAggr.dropInputLabels`
Before, labels were set to all the `remoteWrite.url`.
address https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6780
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
### Describe Your Changes
1) Changed table settings from a popup to a modal window to simplify
future functionality additions.
2) Added functionality to save selected columns when data is modified or
the page is reloaded. See #7016.
<details>
<summary>Example screenshots</summary>
<img alt="demo-1" width="600"
src="https://github.com/user-attachments/assets/a5d9a910-363c-4931-8b12-18ea8b3d97d8"/>
</details>
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* `remoteWrite.maxQueueSize` from `100_000` to `1_000_000`, this should
improve resiliency of recording rules that produce many series;
* `remoteWrite.maxBatchSize` from `1_000` to `10_000`, this should be
more efficient to send from netwroking perspective;
* `remoteWrite.concurrency` from `1` to `4`, this should imrpove speed
of sending the generated series.
The new settings should improve remote write performance of vmalert with
default settings.
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Hui Wang <haley@victoriametrics.com>
### Describe Your Changes
It is better to show only unhealthy targets instead of all of them when
`show_only_unhealthy` filter is enabled.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3536
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
It is expected that range_first and range_last functions return non-nan const value across all the points
if the original series contains at least a single non-NaN value. Previously this rule was violated for NaN data points
in the original series. This could confuse users.
While at it, add tests for series with NaN values across all the range_* and running_* functions, in order to maintain
consistent handling of NaN values across these functions.
The previous behaviour was incorrect, since it is unexpected that the -streamAggr.dedupInterval
and -remoteWrite.streamAggr.dedupInterval is applied to processed samples only if -streamAggr.config isn't set.
This is a follow-up for d523015f27
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6711
### Describe Your Changes
change the `/query_range` and `/query` requests method from `GET` to
`POST`. See #6288.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
