### Describe Your Changes
This is useful for clients which validate InfluxDB is available before
data ingestion can be started.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6653
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 9877a5e7d5)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Validate files specified via `-tlsKeyFile` and `-tlsCertFile` cmd-line flags on the process start-up. Previously, validation happened on the first connection accepted by HTTP server.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6608
---------
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit e5d279bb71)
This reverts commit e280d90e9a.
Reason for revert: the updated code doesn't improve the performance of table.MustAddRows for the typical case
when rows contain timestamps belonging to ptws[0].
The performance may be improved in theory for the case when all the rows belong to partiton other than ptws[0],
but this partition is automatically moved to ptws[0] by the code at lines
6aad1d43e9/lib/storage/table.go (L287-L298) ,
so the next time the typical case will work.
Also the updated code makes the code harder to follow, since it introduces an additional level of indirection
with non-trivial semantics inside table.MustAddRows - the partition.TimeRangeInPartition() function.
This function needs to be inspected and understood when reading the code at table.MustAddRows().
This function depends on minTsInRows and maxTsInRows vars, which are defined and initialized
many lines above the partition.TimeRangeInPartition() call. This complicates reading and understanding
the code even more.
The previous code was using clearer loop over rows with the clear call to partition.HasTimestamp()
for every timestamp in the row. The partition.HasTimestamp() call is used in the table.MustAddRows()
function multiple times. This makes the use of partition.HasTimestamp() call more consistent,
easier to understand and easier to maintain comparing to the mix of partition.HasTimestamp() and partition.TimeRangeInPartition()
calls.
Aslo, there is no need in documenting some hardcore software engineering refactoring at docs/CHANGLELOG.md,
since the docs/CHANGELOG.md is intended for VictoriaMetrics users, who may not know software engineering.
The docs/CHANGELOG.md must document user-visible changes, and the docs must be concise and clear for VictoriaMetrics users.
See https://docs.victoriametrics.com/contributing/#pull-request-checklist for more details.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6629
### Describe Your Changes
The original logic is not only highly complex but also poorly readable,
so it can be modified to increase readability and reduce time
complexity.
---------
Co-authored-by: Zhu Jiekun <jiekun@victoriametrics.com>
- Mention that credentials can be configured via env variables at both vmbackup and vmrestore docs.
- Make clear that the AZURE_STORAGE_DOMAIN env var is optional at https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables
- Use string literals as is for env variable names instead of indirecting them via string constants.
This makes easier to read and understand the code. These environment variable names aren't going to change
in the future, so there is no sense in hiding them under string constants with some other names.
- Refer to https://docs.victoriametrics.com/vmbackup/#providing-credentials-via-env-variables in error messages
when auth creds are improperly configured. This should simplify figuring out how to fix the error.
- Simplify the code a bit at FS.newClient(), so it is easier to follow it now.
While at it, remove the check when superflouos environment variables are set, since it is too fragile
and it looks like it doesn't help properly configuring vmbackup / vmrestore.
- Remove envLookuper indirection - just use 'func(name string) (string, bool)' type inline.
This simplifies code reading and understanding.
- Split TestFSInit() into TestFSInit_Failure() and TestFSInit_Success(). This simplifies the test code,
so it should be easier to maintain in the future.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6518
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984
The %q formatter may result in incorrectly formatted JSON string if the original string
contains special chars such as \x1b . They must be encoded as \u001b , otherwise the resulting JSON string
cannot be parsed by JSON parsers.
This is a follow-up for c0caa69939
See https://github.com/VictoriaMetrics/victorialogs-datasource/issues/24
- Clarify the description of -graphite.sanitizeMetricName command-line flag at README.md
- Do not sanitize tag values - only metric names and tag names must be sanitized,
since they are treated specially by Grafana. Grafana doesn't apply any restrictions on tag values.
- Properly replace more than two consecutive dots with a single dot.
- Disallow unicode letters in metric names and tag names, since neither Prometheus nor Grafana
do not support them.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6489
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6077
`Storage.AddRows()` returns an error only in one case: when
`Storage.updatePerDateData()` fails to unmarshal a `metricNameRaw`. But
the same error is treated as a warning when it happens inside
`Storage.add()` or returned by `Storage.prefillNextIndexDB()`.
This commit fixes this inconsistency by treating the error returned by
`Storage.updatePerDateData()` as a warning as well. As a result
`Storage.add()` does not need a return value anymore and so doesn't
`Storage.AddRows()`.
Additionally, this commit adds a unit test that checks all cases that
result in a row not being added to the storage.
---------
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
- Obtain IAM token via GCE-like API instead of Amazon EC2 IMDSv2 API,
since it looks like IMDBSv2 API isn't supported by Yandex Cloud
according to https://yandex.cloud/en/docs/security/standard/authentication#aws-token :
> So far, Yandex Cloud does not support version 2, so it is strongly recommended
> to technically disable getting a service account token via the Amazon EC2 metadata service.
- Try obtaining IAM token via GCE-like API at first and then fall back to the deprecated Amazon EC2 IMDBSv1.
This should prevent from auth errors for instances with disabled GCE-like auth API.
This addresses @ITD27M01 concern at https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5513#issuecomment-1867794884
- Make more clear the description of the change at docs/CHANGELOG.md , add reference to the related issue.
P.S. This change wasn't tested in prod because I have no access to Yandex Cloud.
It is recommended to test this change by @ITD27M01 and @vmazgo , who filed
the issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5513
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6524
- Rename GetStatDialFunc to NewStatDialFunc, since it returns new function with every call
- NewStatDialFunc isn't related to http in any way, so it must be moved from lib/httputils to lib/netutil
- Simplify the implementation of NewStatDialFunc by removing sync.Map from there.
- Use netutil.NewStatDialFunc at app/vmauth and lib/promscrape/discoveryutils
- Use gauge instead of counter type for *_conns metric
This is a follow-up for d7b5062917
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6299
- Move the remaining code responsible for stream aggregation initialization from remotewrite.go to streamaggr.go .
This improves code maintainability a bit.
- Properly shut down streamaggr.Aggregators initialized inside remotewrite.CheckStreamAggrConfigs().
This prevents from potential resource leaks.
- Use separate functions for initializing and reloading of global stream aggregation and per-remoteWrite.url stream aggregation.
This makes the code easier to read and maintain. This also fixes INFO and ERROR logs emitted by these functions.
- Add an ability to specify `name` option in every stream aggregation config. This option is used as `name` label
in metrics exposed by stream aggregation at /metrics page. This simplifies investigation of the exposed metrics.
- Add `path` label additionally to `name`, `url` and `position` labels at metrics exposed by streaming aggregation.
This label should simplify investigation of the exposed metrics.
- Remove `match` and `group` labels from metrics exposed by streaming aggregation, since they have little practical applicability:
it is hard to use these labels in query filters and aggregation functions.
- Rename the metric `vm_streamaggr_flushed_samples_total` to less misleading `vm_streamaggr_output_samples_total` .
This metric shows the number of samples generated by the corresponding streaming aggregation rule.
This metric has been added in the commit 861852f262 .
See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6462
- Remove the metric `vm_streamaggr_stale_samples_total`, since it is unclear how it can be used in practice.
This metric has been added in the commit 861852f262 .
See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6462
- Remove Alias and aggrID fields from streamaggr.Options struct, since these fields aren't related to optional params,
which could modify the behaviour of the constructed streaming aggregator.
Convert the Alias field to regular argument passed to LoadFromFile() function, since this argument is mandatory.
- Pass Options arg to LoadFromFile() function by reference, since this structure is quite big.
This also allows passing nil instead of Options when default options are enough.
- Add `name`, `path`, `url` and `position` labels to `vm_streamaggr_dedup_state_size_bytes` and `vm_streamaggr_dedup_state_items_count` metrics,
so they have consistent set of labels comparing to the rest of streaming aggregation metrics.
- Convert aggregator.aggrStates field type from `map[string]aggrState` to `[]aggrOutput`, where `aggrOutput` contains the corresponding
`aggrState` plus all the related metrics (currently only `vm_streamaggr_output_samples_total` metric is exposed with the corresponding
`output` label per each configured output function). This simplifies and speeds up the code responsible for updating per-output
metrics. This is a follow-up for the commit 2eb1bc4f81 .
See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6604
- Added missing urls to docs ( https://docs.victoriametrics.com/stream-aggregation/ ) in error messages. These urls help users
figuring out why VictoriaMetrics or vmagent generates the corresponding error messages. The urls were removed for unknown reason
in the commit 2eb1bc4f81 .
- Fix incorrect update for `vm_streamaggr_output_samples_total` metric in flushCtx.appendSeriesWithExtraLabel() function.
While at it, reduce memory usage by limiting the maximum number of samples per flush to 10K.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5467
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6268
Pending rows and items unconditionally remain in memory for up to pending{Items,Rows}FlushInterval,
so there is no any sense in setting dataFlushInterval (the interval for guaranteed flush of in-memory data to disk)
to values smaller than pending{Items,Rows}FlushInterval, since this doesn't affect the interval
for flushing pending rows and items from memory to disk.
This is a follow-up for 4c80b17027
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6221
- Consistently enumerate stream aggregation outputs in alphabetical order across the source code and docs.
This should simplify future maintenance of the corresponding code and docs.
- Fix the link to `rate_sum()` at `see also` section of `rate_avg()` docs.
- Make more clear the docs for `rate_sum()` and `rate_avg()` outputs.
- Encapsulate output metric suffix inside rateAggrState. This eliminates possible bugs related
to incorrect suffix passing to newRateAggrState().
- Rename rateAggrState.total field to less misleading rateAggrState.increase name, since it calculates
counter increase in the current aggregation window.
- Set rateLastValueState.prevTimestamp on the first sample in time series instead of the second sample.
This makes more clear the code logic.
- Move the code for removing outdated entries at rateAggrState into removeOldEntries() function.
This make the code logic inside rateAggrState.flushState() more clear.
- Do not write output sample with zero value if there are no input series, which could be used
for calculating the rate, e.g. if only a single sample is registered for every input series.
- Do not take into account input series with a single registered sample when calculating rate_avg(),
since this leads to incorrect results.
- Move {rate,total}AggrState.flushState() function to the end of rate.go and total.go files, so they look more similar.
This shuld simplify future mantenance.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6243
- Drop samples and return true from remotewrite.TryPush() at fast path when all the remote storage
systems are configured with the disabled on-disk queue, every in-memory queue is full
and -remoteWrite.dropSamplesOnOverload is set to true. This case is quite common,
so it should be optimized. Previously additional CPU time was spent on per-remoteWriteCtx
relabeling and other processing in this case.
- Properly count the number of dropped samples inside remoteWriteCtx.pushInternalTrackDropped().
Previously dropped samples were counted only if -remoteWrite.dropSamplesOnOverload flag is set.
In reality, the samples are dropped when they couldn't be sent to the queue because in-memory queue is full
and on-disk queue is disabled.
The remoteWriteCtx.pushInternalTrackDropped() function is called by streaming aggregation for pushing
the aggregated data to the remote storage. Streaming aggregation cannot wait until the remote storage
processes pending data, so it drops aggregated samples in this case.
- Clarify the description for -remoteWrite.disableOnDiskQueue command-line flag at -help output,
so it is clear that this flag can be set individually per each -remoteWrite.url.
- Make the -remoteWrite.dropSamplesOnOverload flag global. If some of the remote storage systems
are configured with the disabled on-disk queue, then there is no sense in keeping samples
on some of these systems, while dropping samples on the remaining systems, since this
will result in global stall on the remote storage system with the disabled on-disk queue
and with the -remoteWrite.dropSamplesOnOverload=false flag. vmagent will always return false
from remotewrite.TryPush() in this case. This will result in infinite duplicate samples
written to the remaining remote storage systems. That's why the -remoteWrite.dropSamplesOnOverload
is forcibly set to true if more than one -remoteWrite.disableOnDiskQueue flag is set.
This allows proceeding with newly scraped / pushed samples by sending them to the remaining
remote storage systems, while dropping them on overloaded systems with the -remoteWrite.disableOnDiskQueue flag set.
- Verify that the remoteWriteCtx.TryPush() returns true in the TestRemoteWriteContext_TryPush_ImmutableTimeseries test.
- Mention in vmagent docs that the -remoteWrite.disableOnDiskQueue command-line flag can be set individually per each -remoteWrite.url.
See https://docs.victoriametrics.com/vmagent/#disabling-on-disk-persistence
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6248
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6065
This makes test code more clear and reduces the number of code lines by 500.
This also simplifies debugging tests. See https://itnext.io/f-tests-as-a-replacement-for-table-driven-tests-in-go-8814a8b19e9e
While at it, consistently use t.Fatal* instead of t.Error* across tests, since t.Error*
requires more boilerplate code, which can result in additional bugs inside tests.
While t.Error* allows writing logging errors for the same, this doesn't simplify fixing
broken tests most of the time.
This is a follow-up for a9525da8a4
We use `vm_streamaggr_flushed_samples_total` to show the number of
produced samples by aggregation rule, previously it was overcounted, and
doesn't account for `output_relabel_configs`.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6462
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 2eb1bc4f81)
### Describe Your Changes
These changes support using Azure Managed Identity for the `vmbackup`
utility. It adds two new environment variables:
* `AZURE_USE_DEFAULT_CREDENTIAL`: Instructs the `vmbackup` utility to
build a connection using the [Azure Default
Credential](https://pkg.go.dev/github.com/Azure/azure-sdk-for-go/sdk/azidentity@v1.5.2#NewDefaultAzureCredential)
mode. This causes the Azure SDK to check for a variety of environment
variables to try and make a connection. By default, it tries to use
managed identity if that is set up.
This will close
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5984
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Testing
However you normally test the `vmbackup` utility using Azure Blob should
continue to work without any changes. The set up for that is environment
specific and not listed out here.
Once regression testing has been done you can set up [Azure Managed
Identity](https://learn.microsoft.com/en-us/entra/identity/managed-identities-azure-resources/overview)
so your resource (AKS, VM, etc), can use that credential method. Once it
is set up, update your environment variables according to the updated
documentation.
I added unit tests to the `FS.Init` function, then made my changes, then
updated the unit tests to capture the new branches.
I tested this in our environment, but with SAS token auth and managed
identity and it works as expected.
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Justin Rush <jarush@epic.com>
Co-authored-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 5fd3aef549)
'any' type is supported starting from Go1.18. Let's consistently use it
instead of 'interface{}' type across the code base, since `any` is easier to read than 'interface{}'.
This makes easier to read and debug these tests. This also reduces test lines count by 15% from 3K to 2.5K .
See https://itnext.io/f-tests-as-a-replacement-for-table-driven-tests-in-go-8814a8b19e9e .
While at it, consistently use t.Fatal* instead of t.Error*, since t.Error* usually leads
to more complicated and fragile tests, while it doesn't bring any practical benefits over t.Fatal*.
Reason for revert:
There are many statsd servers exist:
- https://github.com/statsd/statsd - classical statsd server
- https://docs.datadoghq.com/developers/dogstatsd/ - statsd server from DataDog built into DatDog Agent ( https://docs.datadoghq.com/agent/ )
- https://github.com/avito-tech/bioyino - high-performance statsd server
- https://github.com/atlassian/gostatsd - statsd server in Go
- https://github.com/prometheus/statsd_exporter - statsd server, which exposes the aggregated data as Prometheus metrics
These servers can be used for efficient aggregating of statsd data and sending it to VictoriaMetrics
according to https://docs.victoriametrics.com/#how-to-send-data-from-graphite-compatible-agents-such-as-statsd (
the https://github.com/prometheus/statsd_exporter can be scraped as usual Prometheus target
according to https://docs.victoriametrics.com/#how-to-scrape-prometheus-exporters-such-as-node-exporter ).
Adding support for statsd data ingestion protocol into VictoriaMetrics makes sense only if it provides
significant advantages over the existing statsd servers, while has no significant drawbacks comparing
to existing statsd servers.
The main advantage of statsd server built into VictoriaMetrics and vmagent - getting rid of additional statsd server.
The main drawback is non-trivial and inconvenient streaming aggregation configs, which must be used for the ingested statsd metrics (
see https://docs.victoriametrics.com/stream-aggregation/ ). These configs are incompatible with the configs for standalone statsd servers.
So you need to manually translate configs of the used statsd server to stream aggregation configs when migrating
from standalone statsd server to statsd server built into VictoriaMetrics (or vmagent).
Another important drawback is that it is very easy to shoot yourself in the foot when using built-in statsd server
with the -statsd.disableAggregationEnforcement command-line flag or with improperly configured streaming aggregation.
In this case the ingested statsd metrics will be stored to VictoriaMetrics as is without any aggregation.
This may result in high CPU usage during data ingestion, high disk space usage for storing all the unaggregated
statsd metrics and high CPU usage during querying, since all the unaggregated metrics must be read, unpacked and processed
during querying.
P.S. Built-in statsd server can be added to VictoriaMetrics and vmagent after figuring out more ergonomic
specialized configuration for aggregating of statsd metrics. The main requirements for this configuration:
- easy to write, read and update (ideally it should work out of the box for most cases without additional configuration)
- hard to misconfigure (e.g. hard to shoot yourself in the foot)
It would be great if this configuration will be compatible with the configuration of the most widely used statsd server.
In the mean time it is recommended continue using external statsd server.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6265
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5053
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5052
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/206
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4600
This reverts commit 5a3abfa041.
Reason for revert: exemplars aren't in wide use because they have numerous issues which prevent their adoption (see below).
Adding support for examplars into VictoriaMetrics introduces non-trivial code changes. These code changes need to be supported forever
once the release of VictoriaMetrics with exemplar support is published. That's why I don't think this is a good feature despite
that the source code of the reverted commit has an excellent quality. See https://docs.victoriametrics.com/goals/ .
Issues with Prometheus exemplars:
- Prometheus still has only experimental support for exemplars after more than three years since they were introduced.
It stores exemplars in memory, so they are lost after Prometheus restart. This doesn't look like production-ready feature.
See 0a2f3b3794/content/docs/instrumenting/exposition_formats.md (L153-L159)
and https://prometheus.io/docs/prometheus/latest/feature_flags/#exemplars-storage
- It is very non-trivial to expose exemplars alongside metrics in your application, since the official Prometheus SDKs
for metrics' exposition ( https://prometheus.io/docs/instrumenting/clientlibs/ ) either have very hard-to-use API
for exposing histograms or do not have this API at all. For example, try figuring out how to expose exemplars
via https://pkg.go.dev/github.com/prometheus/client_golang@v1.19.1/prometheus .
- It looks like exemplars are supported for Histogram metric types only -
see https://pkg.go.dev/github.com/prometheus/client_golang@v1.19.1/prometheus#Timer.ObserveDurationWithExemplar .
Exemplars aren't supported for Counter, Gauge and Summary metric types.
- Grafana has very poor support for Prometheus exemplars. It looks like it supports exemplars only when the query
contains histogram_quantile() function. It queries exemplars via special Prometheus API -
https://prometheus.io/docs/prometheus/latest/querying/api/#querying-exemplars - (which is still marked as experimental, btw.)
and then displays all the returned exemplars on the graph as special dots. The issue is that this doesn't work
in production in most cases when the histogram_quantile() is calculated over thousands of histogram buckets
exposed by big number of application instances. Every histogram bucket may expose an exemplar on every timestamp shown on the graph.
This makes the graph unusable, since it is litterally filled with thousands of exemplar dots.
Neither Prometheus API nor Grafana doesn't provide the ability to filter out unneeded exemplars.
- Exemplars are usually connected to traces. While traces are good for some
I doubt exemplars will become production-ready in the near future because of the issues outlined above.
Alternative to exemplars:
Exemplars are marketed as a silver bullet for the correlation between metrics, traces and logs -
just click the exemplar dot on some graph in Grafana and instantly see the corresponding trace or log entry!
This doesn't work as expected in production as shown above. Are there better solutions, which work in production?
Yes - just use time-based and label-based correlation between metrics, traces and logs. Assign the same `job`
and `instance` labels to metrics, logs and traces, so you can quickly find the needed trace or log entry
by these labes on the time range with the anomaly on metrics' graph.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5982
- Export streamaggr.LoadFromData() function, so it could be used in tests outside the lib/streamaggr package.
This allows removing a hack with creation of temporary files at TestRemoteWriteContext_TryPush_ImmutableTimeseries.
- Move common code for mustParsePromMetrics() function into lib/prompbmarshal package,
so it could be used in tests for building []prompbmarshal.TimeSeries from string.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6205
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6206
- Clarify docs for `Ignore aggregation intervals on start` feature.
- Make more clear the code dealing with ignoreFirstIntervals at aggregator.runFlusher() functions.
It is better from readability and maintainability PoV using distinct a.flush() calls
for distinct cases instead of merging them into a single a.flush() call.
- Take into account the first incomplete interval when tracking the number of skipped aggregation intervals,
since this behaviour is easier to understand by the end users.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6137
### Describe Your Changes
- added stale metrics counters for input and output samples
- added labels for aggregator metrics =>
`name="{rwctx}:{aggrId}:{aggrSuffix}"`
- rwctx - global or number starting from 1
- aggrid - aggregator id starting from 1
- aggrSuffix - <interval>_(by|without)_label1_label2_labeln
e.g: `name="global:1:1m_without_instance_pod"`
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 861852f262)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The set of log fields in the found logs may differ from the set of log fields present in the log stream.
So compare only the log fields in the found logs when searching for the matching log entry in the log stream.
While at it, return _stream field in the delimiter log entry, since this field is used by VictoriaLogs Web UI
for grouping logs by log streams.
### Describe Your Changes
Fix Date metricid cache consistency under concurrent use.
When one goroutine calls Has() and does not find the cache entry in the
immutable map it will acquire a lock and check the mutable map. And it
is possible that before that lock is acquired, the entry is moved from
the mutable map to the immutable map by another goroutine causing a
cache miss.
The fix is to check the immutable map again once the lock is acquired.
### Checklist
The following checks are **mandatory**:
- [x ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
The TryParseTimestampRFC3339Nano() must properly parse RFC3339 timestamps with timezone offsets.
While at it, make tryParseTimestampISO8601 function private in order to prevent
from improper usage of this function from outside the lib/logstorage package.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6508
Reason for revert: this commit doesn't resolve real security issues,
while it complicates the resulting code in subtle ways (aka security circus).
Comparison of two strings (passwords, auth keys) takes a few nanoseconds.
This comparison is performed in non-trivial http handler, which takes thousands
of nanoseconds, and the request handler timing is non-deterministic because of Go runtime,
Go GC and other concurrently executed goroutines. The request handler timing is even
more non-deterministic when the application is executed in shared environments
such as Kubernetes, where many other applications may run on the same host and use
shared resources of this host (CPU, RAM bandwidth, network bandwidth).
Additionally, it is expected that the passwords and auth keys are passed via TLS-encrypted connections.
Establishing TLS connections takes additional non-trivial time (millions of nanoseconds),
which depends on many factors such as network latency, network congestion, etc.
This makes impossible to conduct timing attack on passwords and auth keys in VictoriaMetrics components.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6423/files
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6392
### Describe Your Changes
Fixed a small typo in a comment about the mutex inside the FastQueue
struct
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit d236604d39)
### Describe Your Changes
Trimming content which is loaded from an external pass leads to obscure
issues in case user-defined input contained trimmed chars. For example.
user-defined password "foo\n" will become "foo" while user will expect
it to contain a new line.
---
For example, a user defines a password which ends with `\n`. This often
happens when user Kubernetes secrets and manually encodes value as
base64-encoded string.
In this case vmauth configuration might look like:
```
users:
- url_prefix:
- http://vminsert:8480/insert/0/prometheus/api/v1/write
name: foo
username: foo
password: "foobar\n"
```
vmagent configuration for this setup will use the following flags:
```
-remoteWrite.url=http://vmauth:8427/
-remoteWrite.basicAuth.passwordFile=/tmp/vmagent-password
-remoteWrite.basicAuth.username="foo"
```
Where `/tmp/vmagent-password` is a file with `foobar\n` password.
Before this change such configuration will result in `401 Unauthorized`
response received by vmagent since after file content will become
`foobar`.
---
An example with Kubernetes operator which uses a secret to reference the
same password in multiple configurations.
<details>
<summary>See full manifests</summary>
`Secret`:
```
apiVersion: v1
data:
name: Zm9v # foo
password: Zm9vYmFy # foobar\n
username: Zm9v= # foo
kind: Secret
metadata:
name: vmuser
```
`VMUser`:
```
apiVersion: operator.victoriametrics.com/v1beta1
kind: VMUser
metadata:
name: vmagents
spec:
generatePassword: false
name: vmagents
targetRefs:
- crd:
kind: VMAgent
name: some-other-agent
namespace: example
username: foo
# note - the secret above is referenced to provide password
passwordRef:
name: vmagent
key: password
```
`VMAgent`:
```
apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAgent
metadata:
name: example
spec:
selectAllByDefault: true
scrapeInterval: 5s
replicaCount: 1
remoteWrite:
- url: "http://vmauth-vmauth-example:8427/api/v1/write"
# note - the secret above is referenced as well
basicAuth:
username:
name: vmagent
key: username
password:
name: vmagent
key: password
```
</details>
Since both config target exactly the same `Secret` object it is expected
to work, but apparently the result will be `401 Unauthrized` error.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 201fd6de1e)
Check for ranged vector arguments in aggregate expressions when
`-search.disableImplicitConversion` or `-search.logImplicitConversion`
are enabled.
For example, `sum(up[5m])` will fail to execute if these flags are set.
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [*] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 6149adbe10)
### Describe Your Changes
* check if `lastValue` was seen at least twice with different
timestamps. Otherwise, the difference between last timestamp and
previous timestamp could be `0` and will result into `NaN` calculation
* check if there items left in lastValue map after staleness cleanup.
Otherwise, `rate_avg` could have produce `NaN` result.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 51d19485bb)
Previously byte slices up to 2^20 bytes (e.g. 1Mb) were cached because of a typo in the commit c14dafce43 .
This could result in increased memory usage when vmagent scrapes many regular targets, which expose
relatively small number of metrics (e.g. up to a few thousand per target) and a few large targets such as kube-state-metrics,
which expose more than 10 thousand metrics. This is common case for Kubernetes monitoring.
While at it, remove pools for very small byte slices, since they are rarely used during scraping.
- Make it in a separate goroutine, so it doesn't slow down regular intern() calls.
- Do not lock internStringMap.mutableLock during the cleanup routine, since now
it is called from a single goroutine and reads only the readonly part of the internStringMap.
This should prevent from locking regular intern() calls for new strings during cleanups.
- Add jitter to the cleanup interval in order to prevent from synchornous increase in resource usage
during cleanups.
- Run the cleanup twice per -internStringCacheExpireDuration . This should save 30% CPU time spent
on cleanup comparing to the previous code, which was running the cleanup 3 times per -internStringCacheExpireDuration .
This change fixes the following panic:
```
2024-06-04T11:16:52.899Z warn app/vmauth/auth_config.go:353 cannot discover backend SRV records for http://srv+localhost:8080: lookup localhost on 10.100.10.4:53: server misbehaving; use it literally
panic: runtime error: integer divide by zero
goroutine 9 [running]:
github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver.handlerWrapper.func1()
/Users/lhhdz/wd/projects/go/VictoriaMetrics/lib/httpserver/httpserver.go:291 +0x58
panic({0x103115100?, 0x10338d700?})
/Users/lhhdz/go/pkg/mod/golang.org/toolchain@v0.0.1-go1.22.3.darwin-arm64/src/runtime/panic.go:770 +0x124
main.getLeastLoadedBackendURL({0x0?, 0x22?, 0x1400014757b?}, 0x1400013c120?)
/Users/lhhdz/wd/projects/go/VictoriaMetrics/app/vmauth/auth_config.go:473 +0x210
main.(*URLPrefix).getBackendURL(0x140000aa080)
/Users/lhhdz/wd/projects/go/VictoriaMetrics/app/vmauth/auth_config.go:312 +0xb8
```
---------
Co-authored-by: Haley Wang <haley@victoriametrics.com>
This should reduce GC overhead when tens of millions of strings are interned (for example, during stream deduplication
of millions of active time series).
These functions are called every time `/metrics` page is scraped, so it would be great
if they could be sped up for the cases when dedupAggr tracks tens of millions of active time series.
…pAuth.*
address https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6329,
makes `reloadAuthKey`, `configAuthKey`, `flagsAuthKey`, `pprofAuthKey`
behavior the same way,
but keys like `-snapshotAuthKey`, `-forceMergeAuthKey` are still
protected by httpAuth.*. All the available key are listed in
https://docs.victoriametrics.com/single-server-victoriametrics/#security.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 61dce6f2a1)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Use bytesutil.InternString() instead of strings.Clone() for inputKey and outputKey in aggregatorpushSamples().
This should reduce string allocation rate, since strings can be re-used between aggrState flushes.
- Reduce memory allocations at dedupAggrShard by storing dedupAggrSample by value in the active series map.
- Remove duplicate call to bytesutil.InternBytes() at Deduplicator, since it is already called inside dedupAggr.pushSamples().
- Add missing string interning at rateAggrState.pushSamples().
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6402
The main change is getting rid of interning of sample key. It was
discovered that for cases with many unique time series aggregated by
vmagent interned keys could grow up to hundreds of millions of objects.
This has negative impact on the following aspects:
1. It slows down garbage collection cycles, as GC has to scan all inuse
objects periodically. The higher is the number of inuse objects, the
longer it takes/the more CPU it takes.
2. It slows down the hot path of samples aggregation where each key
needs to be looked up in the map first.
The change makes code more fragile, but suppose to provide performance
optimization for heavy-loaded vmagents with stream aggregation enabled.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
### Describe Your Changes
Added streamaggr metrics to:
- `vm_streamaggr_samples_lag_seconds` - samples lag
- `vm_streamaggr_ignored_samples_total{reason="nan"}` - ignored NaN
samples
- `vm_streamaggr_ignored_samples_total{reason="too_old"}` - ignored old
samples
(cherry picked from commit 185fac03b3)
### Describe Your Changes
Fix for issue #6396: according to rmdir manpage, ENOTEMPTY and EEXIST
should be treated equally
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6396
### Checklist
The following checks are **mandatory**:
- [x ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Ludovic Pollet <ludovic.pollet@exfo.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 3ddae77c63)
It allows to create alert for possible item drops at indexdb. It may
happen, if ingested metric size exceeds max indexdb item size.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 69d244e6fb)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* It must reduce memory usage for misbehaving clients. Since
VictoriaMetrics stores sparse index inmemory.
* Reduce disk space usage for indexdb.
* Prevent possible indexDB items drops.
* It may trigger slow insert and new timeseries registration due to
default value for flag change
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6176
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* The new flag can be used for for skipping TLS certificates
verification when connecting to S3 endpoint. Affects vmbackup,
vmrestore, vmbackupmanager.
* replace deprecated `EndpointResolver` with `BaseEndpoint`
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1056
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit ac836bcf6c)
Prevent excessive resource usage when stream aggregation config file
contains no matchers by prevent pushing data into Aggregators object.
Before this change a lot of extra work was invoked without reason.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 7ce052b32d)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* adds datadog extensions for statsd:
- multiple packed values (v1.1)
- additional types distribution, histogram
* adds type check and append metric type to the labels with special tag
name `__statsd_metric_type__`. It simplifies streaming aggregation
config.
* remove statsd support from cluster, since cluster doesn't support
stream aggregation.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit b2765c45d0)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Change the return values for these functions - now they return the unmarshaled result plus
the size of the unmarshaled result in bytes, so the caller could re-slice the src for further unmarshaling.
This improves performance of these functions in hot loops of VictoriaLogs a bit.
Added `rate` and `rate_avg` output
Resource usage is the same as for increase output, tested on a benchmark
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 9c3d44c8c9)
* FEATURE: [vmagent](https://docs.victoriametrics.com/vmagent.html):
allow configuring `-remoteWrite.disableOnDiskQueue` and
`-remoteWrite.dropSamplesOnOverload` cmd-line flags per each
`-remoteWrite.url`. See this [pull
request](https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6065).
Thanks to @rbizos for implementaion!
* FEATURE: [vmagent](https://docs.victoriametrics.com/vmagent.html): add
labels `path` and `url` to metrics
`vmagent_remotewrite_push_failures_total` and
`vmagent_remotewrite_samples_dropped_total`. Now number of failed pushes
and dropped samples can be tracked per `-remoteWrite.url`.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Raphael Bizos <r.bizos@criteo.com>
(cherry picked from commit 87fd400dfc)
Set correct suffix `<output>_prometheus` for aggregation outputs
`increase_prometheus` and `total_prometheus`
Before, outputs `total` and `total_prometheus` or `increase` and
`increase_prometheus` had the same suffix.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 8a03e987cb)
Though labels compressor is quite resource intensive, each aggregator
and deduplicator instance has it's own compressor. Made it shared across
all aggregators to consume less resources while using multiple
aggregators.
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
(cherry picked from commit a9283e06a3)
### Describe Your Changes
related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6041
#### Added
- Added service discovery support for Vultr.
#### Docs
- `CHANGELOG.md`, `sd_configs.md`, `vmagent.md` are updated.
#### Note
- Useful links:
- Vultr API:
https://www.vultr.com/api/#tag/instances/operation/list-instances
- Vultr client SDK: https://github.com/vultr/govultr
- Prometheus SD:
https://github.com/prometheus/prometheus/tree/main/discovery/vultr
---
### Checklist
The following checks are mandatory:
- [X] I have read the [Contributing
Guidelines](https://github.com/VictoriaMetrics/VictoriaMetrics/blob/master/CONTRIBUTING.md)
- [x] All commits are signed and include `Signed-off-by` line. Use `git
commit -s` to include `Signed-off-by` your commits. See this
[doc](https://git-scm.com/book/en/v2/Git-Tools-Signing-Your-Work) about
how to sign your commits.
- [x] Tests are passing locally. Use `make test` to run all tests
locally.
- [x] Linting is passing locally. Use `make check-all` to run all
linters locally.
Further checks are optional for External Contributions:
- [X] Include a link to the GitHub issue in the commit message, if issue
exists.
- [x] Mention the change in the
[Changelog](https://github.com/VictoriaMetrics/VictoriaMetrics/blob/master/docs/CHANGELOG.md).
Explain what has changed and why. If there is a related issue or
documentation change - link them as well.
Tips for writing a good changelog message::
* Write a human-readable changelog message that describes the problem
and solution.
* Include a link to the issue or pull request in your changelog message.
* Use specific language identifying the fix, such as an error message,
metric name, or flag name.
* Provide a link to the relevant documentation for any new features you
add or modify.
- [ ] After your pull request is merged, please add a message to the
issue with instructions for how to test the fix or try the feature you
added. Here is an
[example](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4048#issuecomment-1546453726)
- [x] Do not close the original issue before the change is released.
Please note, in some cases Github can automatically close the issue once
PR is merged. Re-open the issue in such case.
- [x] If the change somehow affects public interfaces (a new flag was
added or updated, or some behavior has changed) - add the corresponding
change to documentation.
Signed-off-by: Jiekun <jiekun.dev@gmail.com>
(cherry picked from commit 17e3d019d2)
This code adds Exemplars to VMagent and the promscrape parser adhering
to OpenMetrics Specifications. This will allow forwarding of exemplars
to Prometheus and other third party apps that support OpenMetrics specs.
---------
Signed-off-by: Ted Possible <ted_possible@cable.comcast.com>
(cherry picked from commit 5a3abfa041)
Add test to cover the code path with overflowing shards buffers and
triggering merge to partition.
This test covers the code path which leaded to
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5959
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit 329c3cbdf0)
The new flag type is supposed to be used for specifying URL values which
could contain sensitive information such as auth tokens in GET params or
HTTP basic authentication.
The URL flag also allows loading its value from files if `file://`
prefix is specified. As example, the new flag type was used in
app/vmbackup as it requires specifying `authKey` param for making the
snapshot.
See related issue
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5973
Thanks to @wasim-nihal for initial implementation
https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6060
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 029060af60)
Stream aggregation may yield inaccurate results if it processes incomplete data.
This issue can arise when data is sourced from clients that maintain a queue of unsent data, such as Prometheus or vmagent.
If the queue isn't fully cleared within the aggregation interval, only a portion of the time series may be included in that period, leading to distorted calculations.
To mitigate this we add an option to ignore first N aggregation intervals. It is expected, that client queues
will be cleared during the time while aggregation ignores first N intervals and all subsequent aggregations
will be correct.
(cherry picked from commit c0e4ccb7b5)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Using plain sync.Pool simplifies the code without increasing memory usage and CPU usage.
So it is better to use plain sync.Pool from readability and maintainability PoV.
This is a follow-up for 8942f290eb
It is incorrect applying the limit on the number of values to search without applying filters,
since the returned subset of label values may miss the label values matching the given filters.
This is a follow-up for 66630c7960
This speeds up auto-suggestion for metric names in VMUI and Grafana, which use the following query in this case:
/api/v1/label/__name__/values?match[]={__name__=~"*.some_value.*"}
When the user types `some_value` in the query input field.
This should improve debuggability of unexpected deletion of directories inside partitions.
While at it, log the proper path to parts.json when the directory for big part is missing in the partition.
parts.json is located inside directory with small parts, and there is no parts.json file inside directory with big parts.
- Automatically reload changed TLS root CA pointed by -remoteWrite.tlsCAFile command-line flag
- Automatically reload changed TLS root CA configured via oauth2.tsl_config.ca_file option at -promscrape.config
- Document the change as a feature instead of a bug at docs/CHANGELOG.md
- Simplify the code at lib/promauth, which is responsible for reloading changed TLS root CA files.
- Simplify the usage of lib/promauth.Config.NewRoundTripper() - now it accepts the base http.Transport
instead of a callback, which can change the internal http.Transport.
- Reuse the default tls config if lib/promauth.Config doesn't contain tls-specific configs.
This should reduce memory usage a bit when tls isn't used for scraping big number of targets.
- Do not re-read TLS root CA files on every processed request. Re-read them once per second.
This should reduce CPU usage when scraping big number of targets over https.
- Do not store cert.pem and key.pem files in TestTLSConfigWithCertificatesFilesUpdate, since they can be loaded
from byte slices via crypto/tls.X509KeyPair().
- Remove obsolete comparisons of string representations for authConfig and proxyAuthConfig at areEqualScrapeConfigs().
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5725
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5526
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2171
* lib/{promauth,promscrape}: automatically refresh root CA certificates after changes on disk
Added a custom `http.RoundTripper` implementation which checks for root CA content changes and updates `tls.Config` used by `http.RoundTripper` after detecting CA change.
Client certificate changes are not tracked by this implementation since `tls.Config` already supports passing certificate dynamically by overriding `tls.Config.GetClientCertificate`.
This change implements dynamic reload of root CA only for streaming client used for scraping. Blocking client (`fasthttp.HostClient`) does not support using custom transport so can't use this implementation.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5526
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promauth/config: update NewRoundTripper API
Update API to allow user to update only parameters required for transport.
Add warning log when reloading Root CA failed.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promauth/config: fix mutex acquire logic
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promauth/config: replace RWMutex with regular mutex to simplify the code
- remove additional mutex used for getRootCABytes - require callee to use mutex
- replace RWMutex with regular mutex
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promauth/config: refactor
- hold the mutex lock to avoid round tripper being re-created twice
- move recreation logic into separate func to simplify the code
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
- Rename -opentelemetry.sanitizeMetrics command-line flag to more clear -opentelemetry.usePrometheusNaming
- Clarify the description of the change at docs/CHANGELOG.md
- Rename promrelabel.SanitizeLabelNameParts to more clear promrelabel.SplitMetricNameToTokens
- Properly split metric names at '_' char in promerlabel.SplitMetricNameToTokens.
- Add tests for various edge cases for Prometheus metric names' normalization
according to the code at b865505850/pkg/translator/prometheus/normalize_name.go
- Extract the code responsible for Prometheus metric names' normalization into a separate file (santize.go)
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6037
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6035
This reverts commit cb23685681.
Reason for revert: the "fix" may hide programming bugs related to incorrect creation of folders
before their use. This may complicate detecting and fixing such bugs in the future.
There are the following fixes for the issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5985 :
- To configure the OS to do not drop data from the system-wide temporary directory (aka /tmp).
- To run VictoriaMetrics with -cacheDataPath command-line flag, which points to the directory,
which cannot be removed automatically by the OS.
The case when the user accidentally deletes the directory with some files created by VictoriaMetrics
shouldn't be considered as expected, so VictoriaMetrics shouldn't try resolving this case automatically.
It is much better from operation and debuggability PoV is to crash with the clear `directory doesn't exist` error
in this case.
The remotewrite.Stop() expects that there are no pending calls to TryPush().
This means that the ingestionRateLimiter.Register() must be unblocked inside TryPush() when calling remotewrite.Stop().
Provide remotewrite.StopIngestionRateLimiter() function for unblocking the rate limiter before calling the remotewrite.Stop().
While at it, move the rate limiter into lib/ratelimiter package, since it has two users.
Also move the description of the feature to the correct place at docs/CHANGELOG.md.
Also cross-reference -remoteWrite.rateLimit and -maxIngestionRate command-line flags.
This is a follow-up for 02bccd1eb9
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5900
* lib/storage: add ability to use downsampling for the given series filter
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs: add information about downsampling filters
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs: fix MetricsQL filter
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage/downsampling: treat missing downsampling filter as a bug
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage/part_header: verify correctness of downsampling filters when opening partition
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage/downsampling: save only appliable rules in part metadata
Filter and save only rules which are appliable to partition based on MinTimestamp of stored data.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage/downsampling: update log messages for final dedup
Properly specify a reason of re-running deduplication for partition.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage: consistently use MaxTimestamp to determine deduplication/downsampling rules
Using MinTimestamp leads to applying downsampling to parts which are only partially covered by downsampling rule.
For example, partition covers range [1000-2000]. At t=2100 and rule offset 500 data with t=2100-500 => 1600 must be downsampled. The range check against MinTimestamp evaluates to true even though partition contains range which must not be downsampled - [1600:2000].
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Follow-up
- Apply the first matching downsampling period if multiple filters match the given time series.
This allows fine-tuning the downsampling config for the specific needs.
- Take into account downsampling filters during search queries.
- Reduce the difference between community and enterprise branches. This should simplify further maintenance of these branches.
- Properly parse series filters with colons inside them.
- Document the feature at docs/CHANGELOG.md.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4960
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/storage: adds metrics for downsampling
vm_downsampling_partitions_scheduled - shows the number of parts, that must be downsampled
vm_downsampling_partitions_scheduled_size_bytes - shows total size in bytes for parts, the must be donwsampled
These two metrics answer the questions - is downsampling running? how many parts scheduled for downsampling and how many of them currently downsampled? Storage space that it occupies.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2612
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Store the deadline when the metricID entries must be deleted from indexdb
if metricID->metricName entry isn't found after the deadline. This should
make the code more clear comparing the the previous version, where the timestamp
of the first metricID->metricName lookup miss was stored in missingMetricIDs.
Remove the misleading comment about the importance of the order for creating entries
in the inverted index when registering new time series. The order doesn't matter,
since any subset of the created entries can become visible for search
before any other subset after registering in indexdb.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5948
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5959
* lib/storage/table: properly wait for force merges to be completed during shutdown
Properly keep track of running background merges and wait for merges completion when closing the table.
Previously, force merge was not in sync with overall storage shutdown which could lead to holding ptw ref.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs: add changelog entry
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
vmselect uses a cache folder in file system for two purposes:
1. Storing rollup cache results on shutdown;
2. Storing temporary search results from vmstorage during query executions.
It could happen that cache folder is deleted accidentally by user, or by OS
during cleanup routines. This would cause vmselect to:
1. panic on /metrics call, because `MustGetFreeSpace` will fail;
2. return query error user, as it won't be able to store temporary search results.
The changes in this commit are the following:
1. Make `MustGetFreeSpace` to try re-creating the cache folder if it is missing;
2. Make vmselect to try re-creating the cache folder if it can't persist tmp search
results.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5985
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
(cherry picked from commit cb23685681)
Convert test result expectations to canonical form.
Starting from b577413d3b specified header keys are forced
into canonical form https://pkg.go.dev/net/http#CanonicalHeaderKey
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit e6dd52b04c)
This makes the code less fragile - it is harder to skip the convertToCompositeTagFilterss() call now.
While at it, call indexSearch.containsTimeRange() inside indexSearch.searchMetricIDsInternal()
in order to quickly terminate search of time series in the old indexdb for new time ranges.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5055
This is a follow-up for 2d31fd7855
