Usernames could be duplicate if it has uniq password.
vmauth makes routing based on auth token and username + password combination must be unique for this case.
The new metric `vmagent_remotewrite_queues` exports a static value of
number of configured remote write queus. This metric is useful to
calculate total saturation per each configured URL with given number
of queues. See corresponding changes to vmagent alerts and dashboard.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The change allows to specify default value for `getScrapeInterval`
function when actual interval can't be calculated.
Before the change, function were returning `maxSilenceInterval` (5m)
in such cases, which may be not correct for instant queries processing.
The specific scenario where using `maxSilenceInterval` caused issues
is the following:
1. Series becomes stale;
2. Client (in this case vmalert) continues to request series every 15s;
3. Database returns empty results as expected;
4. But at some specific moment of time database returns datapoints from `now()-5m`,
because lookback window was extended to `maxSilenceInterval`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmselect: cover special cases for vmalert's routing in single-node version
* remove trailing `/` from requests
* redirect to vmalert's home page when `/vmalert` is requested.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: fix review comments
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Update app/vmselect/main.go
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Use binary search instead of linear scan when locating the run of smallest timestamps
in blocks with intersected time ranges. This should improve performance
when merging blocks with big number of samples
- Skip samples with duplicate timestamps. This should increase query performance
in cluster version of VictoriaMetrics with the enabled replication.
* vmalert: deprecate alert's status link
Deprecate alert's status link `/api/v1/<groupID>/<alertID>/status` in favour of
`api/v1/alerts?group_id=<group_id>&alert_id=<alert_id>"`.
The change was needed for simplifying logic in vmselect for proxying vmalert's requests.
The old alert's status link will be still supported for a few versions but will be removed in the future.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2825
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: fix review comments
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* make all links in vmalert relative, so links continue to work even if vmalert sits behind the proxy;
* update vmalert's routing to always have component-unique path prefix, e.g. /vmalert;
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2825
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- show dates in human-readable format, e.g. 2022-05-07, instead of a numeric value
- limit the maximum length of queries and filters shown in trace messages
Production experience shows that 100k is too big for /api/v1/series .
It leads to increased CPU usage when Grafana queries /api/v1/series over VictoriaMetrics
with big number of time series during auto-completion and when modifying template variables.
Previously SearchMetricNames was returning unmarshaled metric names.
This wasn't great for vmstorage, which should spend additional CPU time
for marshaling the metric names before sending them to vmselect.
While at it, remove possible duplicate metric names, which could occur when
multiple samples for new time series are ingested via concurrent requests.
Also sort the metric names before returning them to the client.
This simplifies debugging of the returned metric names across repeated requests to /api/v1/series
querytracer has been added to the following storage.Storage methods:
- RegisterMetricNames
- DeleteMetrics
- SearchTagValueSuffixes
- SearchGraphitePaths
* vmalert: remove head of line blocking for sending alerts
This change makes sending alerts to notifiers concurrent instead
of sequential. This eliminates head of line blocking, where first
faulty notifier address prevents the rest of notifiers from
receiving notifications.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: make default timeout for sending alerts 10s
Previous value of 1m was too high and was inconsistent
with default timeout defined for notifiers via
configuration file.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: linter checks fix
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmselect: limit `end` param max value by 2d in future
The change is applied only to service handlers like `/labels` or `/series`
and limits the `end` param by max value <= now() + 2 days. The same limit
is applied for the ingested data, so no reason to allow to request data
in future far than that.
The change is also needed for corner cases like https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2669
where too high `end` value triggers inefficient global index search.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docs/CHANGELOG.md: document the bugfix
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This allows filling the seriesCountByFocusLabelValue list in the /api/v1/status/tsdb response
with label values for the specified focusLabel, which contain the highest number of time series.
TODO: add this to Cardinality explorer at VMUI - https://docs.victoriametrics.com/#cardinality-explorer
* feat: make datepicker to be set to last 30 min by default
* fix: correct spinner while loading data
* feat: change legend style
* app/vmselect: `make vmui-update`
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
vmalert: support `limit` param in groups definition
`limit` param limits number of time series samples produced by a single rule
during execution.
On reaching the limit rule will return an err.
Signed-off-by: lihaowei <haoweili35@gmail.com>
dd-agent v5 can issue some requests with trailing slashes.
(e.g.
526559be73/ddagent.py (L303))
Trim trailing slashes for request on /datadog/ paths to accomodate for
that.
Co-authored-by: Pierre Rossi <pierre.rossi@schibsted.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Remove unused js bloatware from /targets page. This strips down binary size by more than 100Kb
- Add /service-discovery page for API compatibility with Prometheus
- Properly load bootstrap.min.css from /prometheus/targets
- Serve static contents for /targets page from app/vminsert instead of app/vmselect, because /targets page is served from there
The default size of `indexdb/tagFilters` now can be overridden via
`storage.cacheSizeIndexDBTagFilters` flag.
Please, be careful with changing default size since it may
lead to inefficient work of the vmstorage or OOM exceptions.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2663
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
Fixes security vulnerability in nth-check version <=1.0.2
My previous version pin was insufficient, as it was imported again through a different (svgo -> css-select).
The new metric shows the configured evaluation interval per group.
Metric updates its value when group's interval is changed during
hot reload.
The new metric can be used to estimate how close group
is to start missing evaluation rounds. The following query
will show the % of used time by the group to evaluate all rules
before the next round:
```
(max(vmalert_iteration_duration_seconds{quantile="0.99"}) / vmalert_iteration_interval_seconds) * 100
```
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2618
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This adds the ability to utilize sigv4 signing for all AWS services not
just "aps". When the newly introduced property "service" is not set it
will default to "aps".
Signed-off-by: Boris Petersen <boris.petersen@idealo.de>
Unexpectedly, Grafana makes an extra request to `/rules`
handler in addition to `/api/v1/rules` calls in alerts UI.
This happens only for Grafana versions older than 8.5.*.
Apparently, this is related to support of other monitoring
systems.
Prometheus responds with `text/html` content for UI page `/rules`
to such requests. Actually, returning just a blank page with
SC=200 works as well.
Returning actual response of `/api/v1/rules`
results in error in Grafana since it expects a `yaml` (?) in response.
So we add a placeholder to `vmalert`.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2583
Signed-off-by: hagen1778 <roman@victoriametrics.com>
For liquid text processor double braces `{{` `}}`
are special chars for templating.
Since we use them in some of our docs with different purpose,
we must escape them to avoid syntax errors from liquid.
For escaping curly braces we use bult-in plugin which helps
to enclose sections of text via `{% raw %}` and `{% endraw %}`.
This approach prevents liquid syntax errors and makes render correct.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Rules executor within group tracks series sent to remote write
in order to mark them as stale if they had disappeared in next
evaluation round.
The executor uses rules ID as a key to identifies series which belong to rule.
On config reload, executor remains active but the set of rules could change.
Hence, we need to properly cleanup the tracker for rules which has been disappeared
on config reload.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* deployment/docker: pass `-buildvs=false` to `go build` for production builds
This should resolve the `error obtaining VCS status: exit status 128` error
when the environment contains incorrect version of git or has incorrect access rights
to the directory with VictoriaMetrics source code.
See the following links for additional info:
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2508#issuecomment-1117126702 ,
- https://github.com/google/ko/issues/672
- https://github.com/golang/go/issues/49004
* lib/netutil: limit the number of concurrently established connections when calling ConnPool.Get()
This should reduce potential spikes in the number of established connections in the following cases:
- when the connection establishing procedure becomes temporarily slow
- after a temporary spike in the rate of ConnPool.Get() calls
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2552
* docs/CHANGELOG.md: document c8af625bcc
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1322#issuecomment-1120276146
* docs/Cluster-VictoriaMetrics.md: typo fix: `by by` -> `by`
* docs: add `resource usage limits` docs, which describe fine-grained tuning for various resource usage limits
* docs/Cluster-VictoriaMetrics.md: the `/api/v1/label/.../values` query can take CPU and ram at both vmstorage and vmselect
* Update root Readme and root vmagent readme
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* vmalert: calculate time for firing alert based on the given timestamp
Previously, current time was used for checking the `firing` threshold.
This is not correct, since alerts are evaluated at specific timestamps.
Hence, this specific timestamp supposed to be used in the calculation.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: properly calculate evaluation timestamp for rules
Timestamp for rules evaluation should be calculated after
the artifical delay for groups start. Otherwise, evaluation
timestamp can fall back too far in time.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Make it possible to migrate timeseries while restoring the
original timeseries name previously written from Prometheus
to InfluxDB v1 via remote_write.
Fixes: https://github.com/VictoriaMetrics/vmctl/issues/8
Do not assume the db label to be the last one and also
make sure we are not skipping it and everything afterwards.
Breaking the loop would cause following labels to be empty.
* {lib/promscrape,app/vmagent}: adds sigv4 support for vmagent remoteWrite
moves aws related code into separate lib from lib/promscrape
it allows to write data from vmagent to the AWS managed prometheus (cortex)
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1287
* Apply suggestions from code review
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* app/vmselect: adds proxy for rules and alerts API
It allows to visualization for rules at grafana
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1739
* Update app/vmselect/main.go
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
vmctl: fix vmctl blocking on process interrupt
This change prevents vmctl from indefinite blocking on
receiving the interrupt signal. The update touches all
import modes and suppose to improve tool reliability.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2491
This adds a metric for the rate limit.
The limit is present as a flag currently:
`flag{name="remoteWrite.rateLimit", value="500000", is_set="true"} 1`
We are running many instances of vmagent and when creating alerts it is harder than it needs to be when extracting the value from the flag.
With this change it should be easier to monitor how close to the limit we are.
`((100/vmagent_remotewrite_rate_limit{account="account"})*sum (rate(vmagent_remotewrite_conn_bytes_written_total{account="account"}))) and ON (account) flag{name="remoteWrite.rateLimit"} == 1`
Function `ValidateTemplates`, used on the vmalert startup,
is supposed to check whether used templates and functions
in loaded rules are correct. The function was parsing
and executing loaded templates.
However, rules may contain functions which can't be executed
without values (label values or query results), like `slice`.
Because of this, validation for completely valid expression
`{{ slice $labels.job 9 }}` will fail since `$labels.job`
is empty during validation.
This PR updates `ValidateTemplates` function to only parse
templates without executing them.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2514
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/{storage,flagutil} - Add option for snapshot autoremoval
- add prometheus-like duration as command flag
- add option to delete stale snapshots
- update duration.go flag to re-use own code
* wip
* lib/flagutil: re-use Duration.Set() call in NewDuration
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
add progress bars to the VM importer
The new progress bars supposed to display the processing speed per each
VM importer worker. This info should help to identify if there is a bottleneck
on the VM side during the import process, without waiting for its finish.
The new progress bars can be disabled by passing `vm-disable-progress-bar` flag.
Plotting multiple progress bars requires using experimental progress bar pool
from github.com/cheggaaa/pb/v3. Switch to progress bar pool required changes
in all import modes.
The openTSDB mode wasn't changed due to its implementation, which implies individual progress
bars per each series. Because of this, using the pool wasn't possible.
Signed-off-by: dmitryk-dk <kozlovdmitriyy@gmail.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* Export "null" in jsonl instead of NaN
The NaN appeared because of staleness markers that were added for compatibility. I think it's better to use json `null`, implemented here.
Also maybe it also makes sense to add a flag like `?skip-staleness-markers=true` to `/export`, to skip nulls at all?
* Update app/vmselect/prometheus/export.qtpl
* app/vmselect/prometheus/export.qtpl.go: `make quicktemplate-gen`
* docs/CHANGELOG.md: document the change
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* app/vmselect: adds API /api/v1/status/buildinfo
it should fix an compability error with grafana 8.5 prometheus datasource
https://github.com/grafana/grafana/pull/46771
* Update main.go
