Properly determine time range search for instant queries with too big look-behind window like `foo[100y]`.
Previously, such queries could return empty responses even if `foo` is present in database.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5553
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Clarify the bugfix description at docs/CHANGELOG.md
- Simplify the code by accessing prefetchedMetricIDs struct under the lock
instead of using lockless access to immutable struct.
This shouldn't worsen code scalability too much on busy systems with many CPU cores,
since the code executed under the lock is quite small and fast.
This allows removing cloning of prefetchedMetricIDs struct every time
new metric names are pre-fetched. This should reduce load on Go GC,
since the cloning of uin64set.Set struct allocates many new objects.
Before, this cache was limited only by size.
Cache invalidation by time happens with jitter to prevent thundering herd problem.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/awsapi: properly assume role with webIdentity token
introduce new irsaRoleArn param for config. It's only needed for authorization with webIdentity token.
First credentials obtained with irsa role and the next sts assume call for an actual roleArn made with those credentials.
Common use case for it - cross AWS accounts authorization
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3822
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Before, retries happened only on writes into a network connection
between source and destination. But errors returned by server after
all the data was transmitted were logged, but not retried.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Some clients may ingest samples via OpenTelemetry protocol without Resource labels.
Previously VictoriaMetrics was silently dropping such samples.
The commit 317834f876 added vm_protoparser_rows_dropped_total{type="opentelemetry",reason="resource_not_set"}
counter for tracking of such dropped samples. See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5459
It is better from usability PoV to accept such samples instead of dropping them and incrementing the corresponding counter.
Before, vmalert would send notifications with labels containing characters
not supported by Alertmanager validator, resulting into validation errors
like `msg="Failed to validate alerts" err="invalid label set: invalid name "foo.bar"`
Signed-off-by: hagen1778 <roman@victoriametrics.com>
E.g. replace `fs.Dir + filePath` with `path.Join(fs.Dir, filePath)`
The fs.Dir is guaranteed to end with slash - see Init() functions.
The filePath may start with slash. If it starts with slash, then `fs.Dir + filePath` constructs
an incorrect path with double slashes.
path.Join() properly substitutes duplicate slashes with a single slash in this case.
While at it, also substitute incorrect usage of filepath.Join() with path.Join()
for constructing paths to object storage systems, which expect forward slashes in paths.
filepath.Join() substittues forward slashes with backslashes on Windows, so this may break
creating or managing backups from Windows.
This is a follow-up for 0399367be602b577baf6a872ca81bf0f99ba401b
Updates https://github.com/VictoriaMetrics/VictoriaMetrics-enterprise/pull/719
* lib/backup/s3remote: remove prev object versions for recursive delete
- fix error caused by sending empty objects list to be deleted. This was possible in case old versions of objects where deleted, but root-level entries where still available. This caused paginator to return an empty page which wasn't skipped.
- delete previous versions of objects recursively for S3 remote
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/changelog: add vmbackupmanager fix entry
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/backup/s3remote: unify path construction for S3 objects
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/streamaggr: properly reference slice with labels
by limiting slice capacity. It must fix issues with slice modification, in case of append new slice will be allocated, instead of modifying refrenced slice
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5402
* Reduce memory allocations when output_relabel_configs adds new labels to output samples
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This case is possible after the following steps:
1. vmagent successfully performed handshake with the -remoteWrite.url and the remote storage supports zstd-compressed data.
2. remote storage became unavailable or slow to ingest data, vmagent compressed the collected data into blocks with zstd and puts these blocks to persistent queue on disk.
3. vmagent restarts and the remote storage is unavailable during the handshake, then vmagent falls back to Snappy compression.
4. vmagent starts sending zstd-compressed data from persistent queue to the remote storage, while falsely advertizing it sends Snappy-compressed data.
5. The remote storage receives zstd-compressed data and fails unpacking it with Snappy.
The solution is the same as 12cd32fd75, just fall back to zstd decompression if Snappy decompression fails.
* lib/querytracer: makes package concurrent safe to use
it must fix various issues with concurrent code usage.
Especially, when it's not reasonable to wait for all goroutines to be finished
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This case is possible after the following steps:
1. vmagent tries to perform handshake with the -remoteWrite.url in order to determine whether
the remote storage supports zstd-compressed data.
2. The remote storage is unavailable during the handshake. In this case vmagent falls back to Snappy compression
for the data sent to the remote storage.
3. vmagent compresses the collected data into blocks with Snappy and puts these blocks to persistent queue on disk.
4. The remote storage becomes available.
5. vmagent restarts, performs the handshake with the remote storage and detects that it supports zstd-compressed data.
6. vmagent starts sending Snappy-compressed data from persistent queue to the remote storage,
while falsely advertizing it sends zstd-compressed data.
7. The remote storage receives Snappy-compressed data and fails unpacking it with zstd.
The solution is to just fall back to Snappy decompression if zstd decompression fails.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5301
* vmauth: add browser authorization request for http requests without credentials to a route that is not in the `unauthorized_user` section (when `unauthorized_user` is specified).
* add link to issue in CHANGELOG
* Extend vmauth docs
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Previously url watchers for pod, service and node objects could be mistakenly closed
when service discovery was set up only for endpoints and endpointslice roles,
since watchers for these roles may start start pod, service and node url watchers
with nil apiWatcher passed to groupWatcher.startWatchersForRole().
Now all the url watchers, which belong to a particular groupWatcher, are stopped at once
when this groupWatcher has no apiWatcher subscribers.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5216
The issue has been introduced in v1.93.5 when addressing https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4850
* do not print redundant error logs when failed to scrape consul or nomad target
prometheus performs the same because it uses consul lib which just drops the error(1806bcb38c/api/api.go (L1134))
* app/vmselect: limit the number of parallel workers by 32
The change should improve performance and memory usage during query processing
on machines with big number of CPU cores. The number of parallel workers for
query processing is controlled via `-search.maxWorkersPerQuery` command-line flag.
By default, the number of workers is limited by the number of available CPU cores,
but not more than 32. The limit can be increased via `-search.maxWorkersPerQuery`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
- The `-search.maxWorkersPerQuery` command-line flag doesn't limit resource usage,
so move it from the `resource usage limits` to `troubleshooting` chapter at docs/Single-server-VictoriaMetrics.md
- Make more clear the description for the `-search.maxWorkersPerQuery` command-line flag
- Add the description of `-search.maxWorkersPerQuery` to docs/Cluster-VictoriaMetrics.md
- Limit the maximum value, which can be passed to `-search.maxWorkersPerQuery`, to GOMAXPROCS,
because bigger values may worsen query performance and increase CPU usage
- Improve the the description of the change at docs/CHANGELOG.md. Mark it as FEATURE instead of BUGFIX,
since it is closer to a feature than to a bugfix.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5087
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
reduce lock contention for heavy aggregation requests
previously lock contetion may happen on machine with big number of CPU due to enabled string interning. sync.Map was a choke point for all aggregation requests.
Now instead of interning, new string is created. It may increase CPU and memory usage for some cases.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5087
Strip sensitive information such as auth headers or passwords from datasource, remote-read,
remote-write or notifier URLs in log messages or UI. This behavior is by default and is controlled via
`-datasource.showURL`, `-remoteRead.showURL`, `remoteWrite.showURL` or `-notifier.showURL` cmd-line flags.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5044
