Before, vmalert would send notifications with labels containing characters
not supported by Alertmanager validator, resulting into validation errors
like `msg="Failed to validate alerts" err="invalid label set: invalid name "foo.bar"`
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Sort labels explicitly after calling the ParsedConfigs.Apply() when needed.
This reduces CPU usage when performing metric-level relabeling, where labels' sorting isn't needed.
Function `ValidateTemplates`, used on the vmalert startup,
is supposed to check whether used templates and functions
in loaded rules are correct. The function was parsing
and executing loaded templates.
However, rules may contain functions which can't be executed
without values (label values or query results), like `slice`.
Because of this, validation for completely valid expression
`{{ slice $labels.job 9 }}` will fail since `$labels.job`
is empty during validation.
This PR updates `ValidateTemplates` function to only parse
templates without executing them.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2514
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Before, relabeling for notifier configured via file was supported
only for target labels discovered via SD.
With this change, new config field `alert_relabel_configs` is introduced
for applying relabeling to labels of sent alerts.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
To improve compatibility with Prometheus alerting the order of
templates processing has changed.
Before, vmalert did all labels processing beforehand. It meant
all extra labels (such as `alertname`, `alertgroup` or rule labels)
were available in templating. All collisions were resolved in favour
of extra labels.
In Prometheus, only labels from the received metric are available in
templating, so no collisions are possible.
This change makes vmalert's behaviour similar to Prometheus.
For example, consider alerting rule which is triggered by time series
with `alertname` label. In vmalert, this label would be overriden
by alerting rule's name everywhere: for alert labels, for annotations, etc.
In Prometheus, it would be overriden for alert's labels only, but in annotations
the original label value would be available.
See more details here https://github.com/prometheus/compliance/issues/80
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: split alert's `Start` field into `ActiveAt` and `Start`
The `ActiveAt` field identifies when alert becomes active for rules
with `for > 0`. Previously, this value was stored in field `Start`.
The field `Start` now identifies the moment alert became `FIRING`.
The split is needed in order to distinguish these two moments
in the API responses for alerts.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: support specific moment of time for rules evaluation
The Querier interface was extended to accept a new argument
used as a timestamp at which evaluation should be made.
It is needed to align rules execution time within the group.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: mark disappeared series as stale
Series generated by alerting rules, which were sent to remote write
now will be marked as stale if they will disappear on the next
evaluation. This would make ALERTS and ALERTS_FOR_TIME series
more precise.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: evaluate rules at fixed timestamp
Before, time at which rules were evaluated was calculated
right before rule execution. The change makes sure
that timestamp is calculated only once per evalution round
and all rules are using the same timestamp.
It also updates the logic of resending of already resolved
alert notification.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: allow overridin `alertname` label value if it is present in response
Previously, `alertname` was always equal to the Alerting Rule name. Now,
its value can be overriden if series in response containt the different value
for this label.
The change is needed for improving compatibility with Prometheus.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: align rules evaluation in time
Now, evaluation timestamp for rules evaluates as if
there was no delay in rules evaluation. It means, that
rules will be evaluated at fixed timestamps+group_interval.
This way provides more consistent evaluation results and
improves compatibility with Prometheus,
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add metric for missed iterations
New metric `vmalert_iteration_missed_total` will show
whether rules evaluation round was missed.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: reduce delay before the initial rule evaluation in group
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: rollback alertname override
According to the spec:
```
The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label.
```
https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: throw err immediately on dedup detection
```
The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts
or add samples to samples receiver if there is more than one alert with the same labels
```
https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: cleanup
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: use strings builder to reduce allocs
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add support of `resendDelay` flag for alerts
Co-authored-by: dmitryk-dk <dmitry.kozlov@brightlocal.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
Previously, ID for alert entity was generated without alertname or groupname.
This led to collision, when multiple alerting rules within the same group
producing same labelsets. E.g. expr: `sum(metric1) by (job) > 0` and
expr: `sum(metric2) by (job) > 0` could result into same labelset `job: "job"`.
The issue affects only UI and Web API parts of vmalert, because alert ID is used
only for displaying and finding active alerts. It does not affect state restore
procedure, since this label was added right before pushing to remote storage.
The change now adds all extra labels right after receiving response from the datasource.
And removes adding extra labels before pushing to remote storage.
Additionally, change introduces a new flag `Restored` which will be displayed in UI
for alerts which have been restored from remote storage on restart.
* vmalert: add flag to limit the max value for auto-resovle duration for alerts
The new flag `rule.maxResolveDuration` suppose to limit max value for
alert.End param, which is used by notifiers like Alertmanager for alerts auto resolve.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1586
The commit adds a support for template function `query`,
`first` and `value`. The function `query` executes
a MetricsQL query for active alerts. In vmalert we
update templates on every evaluation for active alerts
to keep them up to date. With `query` func it may become
a perf issue since it will fire a query on every execution.
We should keep it in mind for now.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/539
* app/vmalert: support multiple notifier urls (#584)
User now can set multiple notifier URLs in the same fashion
as for other vmutils (e.g. vmagent). The same is correct for
TLS setting for every configured URL. Alerts sending is done
in sequential way for respecting the specified URLs order.
* app/vmalert: add basicAuth support for notifier client (#585)
The change adds possibility to set basicAuth creds for notifier
client in the same fasion as for remote write/read and datasource.
* vmalert: Add recording rules support.
Recording rules support required additional service refactoring since
it wasn't planned to support them from the very beginning. The list
of changes is following:
* new entity RecordingRule was added for writing results of MetricsQL
expressions into remote storage;
* interface Rule now unites both recording and alerting rules;
* configuration parser was moved to separate package and now performs
more strict validation;
* new endpoint for listing all groups and rules in json format was added;
* evaluation interval may be set to every particular group;
* vmalert: uncomment tests
* vmalert: rm outdated TODO
* vmalert: fix typos in README
The change introduces new entity `manager` which replaces
`watchdog`, decouples requestHandler and groups. Manager
supposed to control life cycle of groups, rules and
config reloads.
Groups export an ID method which returns a hash
from filename and group name. ID supposed to be unique
identifier across all loaded groups.
Some tests were added to improve coverage.
Bug with wrong annotation value if $value is used in
templates after metrics being restored fixed.
Notifier interface was extended to accept context.
New set of metrics was introduced for config reload.
